projects/linux·blob master · refs

276 lines · 7.4 KiB

1// SPDX-License-Identifier: GPL-2.0
2/*
3 * linux/arch/alpha/kernel/sys_noritake.c
4 *
5 * Copyright (C) 1995 David A Rusling
6 * Copyright (C) 1996 Jay A Estabrook
7 * Copyright (C) 1998, 1999 Richard Henderson
8 *
9 * Code supporting the NORITAKE (AlphaServer 1000A),
10 * CORELLE (AlphaServer 800), and ALCOR Primo (AlphaStation 600A).
11 */
12
13#include <linux/kernel.h>
14#include <linux/types.h>
15#include <linux/mm.h>
16#include <linux/sched.h>
17#include <linux/pci.h>
18#include <linux/init.h>
19#include <linux/bitops.h>
20
21#include <asm/ptrace.h>
22#include <asm/mce.h>
23#include <asm/dma.h>
24#include <asm/irq.h>
25#include <asm/mmu_context.h>
26#include <asm/io.h>
27#include <asm/core_cia.h>
28#include <asm/tlbflush.h>
29
30#include "proto.h"
31#include "irq_impl.h"
32#include "pci_impl.h"
33#include "machvec_impl.h"
34
35/* Note mask bit is true for ENABLED irqs. */
36static int cached_irq_mask;
37
38static inline void
39noritake_update_irq_hw(int irq, int mask)
40{
41 int port = 0x54a;
42 if (irq >= 32) {
43 mask >>= 16;
44 port = 0x54c;
45 }
46 outw(mask, port);
47}
48
49static void
50noritake_enable_irq(struct irq_data *d)
51{
52 noritake_update_irq_hw(d->irq, cached_irq_mask |= 1 << (d->irq - 16));
53}
54
55static void
56noritake_disable_irq(struct irq_data *d)
57{
58 noritake_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << (d->irq - 16)));
59}
60
61static struct irq_chip noritake_irq_type = {
62 .name = "NORITAKE",
63 .irq_unmask = noritake_enable_irq,
64 .irq_mask = noritake_disable_irq,
65 .irq_mask_ack = noritake_disable_irq,
66};
67
68static void
69noritake_device_interrupt(unsigned long vector)
70{
71 unsigned long pld;
72 unsigned int i;
73
74 /* Read the interrupt summary registers of NORITAKE */
75 pld = (((unsigned long) inw(0x54c) << 32)
76 | ((unsigned long) inw(0x54a) << 16)
77 | ((unsigned long) inb(0xa0) << 8)
78 | inb(0x20));
79
80 /*
81 * Now for every possible bit set, work through them and call
82 * the appropriate interrupt handler.
83 */
84 while (pld) {
85 i = ffz(~pld);
86 pld &= pld - 1; /* clear least bit set */
87 if (i < 16) {
88 isa_device_interrupt(vector);
89 } else {
90 handle_irq(i);
91 }
92 }
93}
94
95static void
96noritake_srm_device_interrupt(unsigned long vector)
97{
98 int irq;
99
100 irq = (vector - 0x800) >> 4;
101
102 /*
103 * I really hate to do this, too, but the NORITAKE SRM console also
104 * reports PCI vectors *lower* than I expected from the bit numbers
105 * in the documentation.
106 * But I really don't want to change the fixup code for allocation
107 * of IRQs, nor the alpha_irq_mask maintenance stuff, both of which
108 * look nice and clean now.
109 * So, here's this additional grotty hack... :-(
110 */
111 if (irq >= 16)
112 irq = irq + 1;
113
114 handle_irq(irq);
115}
116
117static void __init
118noritake_init_irq(void)
119{
120 long i;
121
122 if (alpha_using_srm)
123 alpha_mv.device_interrupt = noritake_srm_device_interrupt;
124
125 outw(0, 0x54a);
126 outw(0, 0x54c);
127
128 for (i = 16; i < 48; ++i) {
129 irq_set_chip_and_handler(i, &noritake_irq_type,
130 handle_level_irq);
131 irq_set_status_flags(i, IRQ_LEVEL);
132 }
133
134 init_i8259a_irqs();
135 common_init_isa_dma();
136}
137
138
139/*
140 * PCI Fixup configuration.
141 *
142 * Summary @ 0x542, summary register #1:
143 * Bit Meaning
144 * 0 All valid ints from summary regs 2 & 3
145 * 1 QLOGIC ISP1020A SCSI
146 * 2 Interrupt Line A from slot 0
147 * 3 Interrupt Line B from slot 0
148 * 4 Interrupt Line A from slot 1
149 * 5 Interrupt line B from slot 1
150 * 6 Interrupt Line A from slot 2
151 * 7 Interrupt Line B from slot 2
152 * 8 Interrupt Line A from slot 3
153 * 9 Interrupt Line B from slot 3
154 *10 Interrupt Line A from slot 4
155 *11 Interrupt Line B from slot 4
156 *12 Interrupt Line A from slot 5
157 *13 Interrupt Line B from slot 5
158 *14 Interrupt Line A from slot 6
159 *15 Interrupt Line B from slot 6
160 *
161 * Summary @ 0x544, summary register #2:
162 * Bit Meaning
163 * 0 OR of all unmasked ints in SR #2
164 * 1 OR of secondary bus ints
165 * 2 Interrupt Line C from slot 0
166 * 3 Interrupt Line D from slot 0
167 * 4 Interrupt Line C from slot 1
168 * 5 Interrupt line D from slot 1
169 * 6 Interrupt Line C from slot 2
170 * 7 Interrupt Line D from slot 2
171 * 8 Interrupt Line C from slot 3
172 * 9 Interrupt Line D from slot 3
173 *10 Interrupt Line C from slot 4
174 *11 Interrupt Line D from slot 4
175 *12 Interrupt Line C from slot 5
176 *13 Interrupt Line D from slot 5
177 *14 Interrupt Line C from slot 6
178 *15 Interrupt Line D from slot 6
179 *
180 * The device to slot mapping looks like:
181 *
182 * Slot Device
183 * 7 Intel PCI-EISA bridge chip
184 * 8 DEC PCI-PCI bridge chip
185 * 11 PCI on board slot 0
186 * 12 PCI on board slot 1
187 * 13 PCI on board slot 2
188 *
189 *
190 * This two layered interrupt approach means that we allocate IRQ 16 and
191 * above for PCI interrupts. The IRQ relates to which bit the interrupt
192 * comes in on. This makes interrupt processing much easier.
193 */
194
195static int
196noritake_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
197{
198 static char irq_tab[15][5] = {
199 /*INT INTA INTB INTC INTD */
200 /* note: IDSELs 16, 17, and 25 are CORELLE only */
201 { 16+1, 16+1, 16+1, 16+1, 16+1}, /* IdSel 16, QLOGIC */
202 { -1, -1, -1, -1, -1}, /* IdSel 17, S3 Trio64 */
203 { -1, -1, -1, -1, -1}, /* IdSel 18, PCEB */
204 { -1, -1, -1, -1, -1}, /* IdSel 19, PPB */
205 { -1, -1, -1, -1, -1}, /* IdSel 20, ???? */
206 { -1, -1, -1, -1, -1}, /* IdSel 21, ???? */
207 { 16+2, 16+2, 16+3, 32+2, 32+3}, /* IdSel 22, slot 0 */
208 { 16+4, 16+4, 16+5, 32+4, 32+5}, /* IdSel 23, slot 1 */
209 { 16+6, 16+6, 16+7, 32+6, 32+7}, /* IdSel 24, slot 2 */
210 { 16+8, 16+8, 16+9, 32+8, 32+9}, /* IdSel 25, slot 3 */
211 /* The following 5 are actually on PCI bus 1, which is
212 across the built-in bridge of the NORITAKE only. */
213 { 16+1, 16+1, 16+1, 16+1, 16+1}, /* IdSel 16, QLOGIC */
214 { 16+8, 16+8, 16+9, 32+8, 32+9}, /* IdSel 17, slot 3 */
215 {16+10, 16+10, 16+11, 32+10, 32+11}, /* IdSel 18, slot 4 */
216 {16+12, 16+12, 16+13, 32+12, 32+13}, /* IdSel 19, slot 5 */
217 {16+14, 16+14, 16+15, 32+14, 32+15}, /* IdSel 20, slot 6 */
218 };
219 const long min_idsel = 5, max_idsel = 19, irqs_per_slot = 5;
220 return COMMON_TABLE_LOOKUP;
221}
222
223static u8
224noritake_swizzle(struct pci_dev *dev, u8 *pinp)
225{
226 int slot, pin = *pinp;
227
228 if (dev->bus->number == 0) {
229 slot = PCI_SLOT(dev->devfn);
230 }
231 /* Check for the built-in bridge */
232 else if (PCI_SLOT(dev->bus->self->devfn) == 8) {
233 slot = PCI_SLOT(dev->devfn) + 15; /* WAG! */
234 }
235 else
236 {
237 /* Must be a card-based bridge. */
238 do {
239 if (PCI_SLOT(dev->bus->self->devfn) == 8) {
240 slot = PCI_SLOT(dev->devfn) + 15;
241 break;
242 }
243 pin = pci_swizzle_interrupt_pin(dev, pin);
244
245 /* Move up the chain of bridges. */
246 dev = dev->bus->self;
247 /* Slot of the next bridge. */
248 slot = PCI_SLOT(dev->devfn);
249 } while (dev->bus->self);
250 }
251 *pinp = pin;
252 return slot;
253}
254
255struct alpha_machine_vector noritake_primo_mv __initmv = {
256 .vector_name = "Noritake-Primo",
257 DO_EV5_MMU,
258 DO_DEFAULT_RTC,
259 DO_CIA_IO,
260 .machine_check = cia_machine_check,
261 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
262 .min_io_address = EISA_DEFAULT_IO_BASE,
263 .min_mem_address = CIA_DEFAULT_MEM_BASE,
264
265 .nr_irqs = 48,
266 .device_interrupt = noritake_device_interrupt,
267
268 .init_arch = cia_init_arch,
269 .init_irq = noritake_init_irq,
270 .init_rtc = common_init_rtc,
271 .init_pci = cia_init_pci,
272 .kill_arch = cia_kill_arch,
273 .pci_map_irq = noritake_map_irq,
274 .pci_swizzle = noritake_swizzle,
275};
276ALIAS_MV(noritake_primo)