| 1 | |
| 2 | |
| 3 | * pci.c -- basic PCI support code
|
| 4 | *
|
| 5 | * (C) Copyright 2011, Greg Ungerer <[email protected]>
|
| 6 |
|
| 7 |
|
| 8 | #include <linux/kernel.h>
|
| 9 | #include <linux/types.h>
|
| 10 | #include <linux/mm.h>
|
| 11 | #include <linux/init.h>
|
| 12 | #include <linux/pci.h>
|
| 13 |
|
| 14 | |
| 15 | * From arch/i386/kernel/pci-i386.c:
|
| 16 | *
|
| 17 | * We need to avoid collisions with `mirrored' VGA ports
|
| 18 | * and other strange ISA hardware, so we always want the
|
| 19 | * addresses to be allocated in the 0x000-0x0ff region
|
| 20 | * modulo 0x400.
|
| 21 | *
|
| 22 | * Why? Because some silly external IO cards only decode
|
| 23 | * the low 10 bits of the IO address. The 0x00-0xff region
|
| 24 | * is reserved for motherboard devices that decode all 16
|
| 25 | * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
|
| 26 | * but we want to try to avoid allocating at 0x2900-0x2bff
|
| 27 | * which might be mirrored at 0x0100-0x03ff..
|
| 28 |
|
| 29 | resource_size_t pcibios_align_resource(void *data, const struct resource *res,
|
| 30 | const struct resource *empty_res,
|
| 31 | resource_size_t size,
|
| 32 | resource_size_t align)
|
| 33 | {
|
| 34 | struct pci_dev *dev = data;
|
| 35 | resource_size_t start = res->start;
|
| 36 |
|
| 37 | if ((res->flags & IORESOURCE_IO) && (start & 0x300))
|
| 38 | start = (start + 0x3ff) & ~0x3ff;
|
| 39 |
|
| 40 | if (res->flags & IORESOURCE_MEM)
|
| 41 | return pci_align_resource(dev, res, empty_res, size, align);
|
| 42 |
|
| 43 | return start;
|
| 44 | }
|
| 45 |
|
| 46 | |
| 47 | * This is taken from the ARM code for this.
|
| 48 |
|
| 49 | int pcibios_enable_device(struct pci_dev *dev, int mask)
|
| 50 | {
|
| 51 | u16 cmd, newcmd;
|
| 52 | int ret;
|
| 53 |
|
| 54 | ret = pci_enable_resources(dev, mask);
|
| 55 | if (ret < 0)
|
| 56 | return ret;
|
| 57 |
|
| 58 | |
| 59 | * Bridges (eg, cardbus bridges) need to be fully enabled
|
| 60 |
|
| 61 | if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) {
|
| 62 | pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
| 63 | newcmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
|
| 64 | if (newcmd != cmd) {
|
| 65 | pr_info("PCI: enabling bridge %s (0x%04x -> 0x%04x)\n",
|
| 66 | pci_name(dev), cmd, newcmd);
|
| 67 | pci_write_config_word(dev, PCI_COMMAND, newcmd);
|
| 68 | }
|
| 69 | }
|
| 70 | return 0;
|
| 71 | }
|
| 72 |
|
| 73 | void pcibios_fixup_bus(struct pci_bus *bus)
|
| 74 | {
|
| 75 | struct pci_dev *dev;
|
| 76 |
|
| 77 | list_for_each_entry(dev, &bus->devices, bus_list) {
|
| 78 | pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
|
| 79 | pci_write_config_byte(dev, PCI_LATENCY_TIMER, 32);
|
| 80 | }
|
| 81 | }
|