| 1 |
|
| 2 | #ifndef _ASM_POWERPC_IO_H
|
| 3 | #define _ASM_POWERPC_IO_H
|
| 4 | #ifdef __KERNEL__
|
| 5 |
|
| 6 | |
| 7 |
|
| 8 |
|
| 9 |
|
| 10 | extern int check_legacy_ioport(unsigned long base_port);
|
| 11 | #define I8042_DATA_REG 0x60
|
| 12 | #define FDC_BASE 0x3f0
|
| 13 |
|
| 14 | #if defined(CONFIG_PPC64) && defined(CONFIG_PCI)
|
| 15 | extern struct pci_dev *isa_bridge_pcidev;
|
| 16 | |
| 17 | * has legacy ISA devices ?
|
| 18 |
|
| 19 | #define arch_has_dev_port() (isa_bridge_pcidev != NULL || isa_io_special)
|
| 20 | #endif
|
| 21 |
|
| 22 | #include <linux/device.h>
|
| 23 | #include <linux/compiler.h>
|
| 24 | #include <linux/mm.h>
|
| 25 | #include <asm/page.h>
|
| 26 | #include <asm/byteorder.h>
|
| 27 | #include <asm/synch.h>
|
| 28 | #include <asm/delay.h>
|
| 29 | #include <asm/mmiowb.h>
|
| 30 | #include <asm/mmu.h>
|
| 31 |
|
| 32 | #define SIO_CONFIG_RA 0x398
|
| 33 | #define SIO_CONFIG_RD 0x399
|
| 34 |
|
| 35 | |
| 36 | * bases. Most of this file only uses _IO_BASE though which we
|
| 37 | * define properly based on the platform
|
| 38 |
|
| 39 | #ifndef CONFIG_PCI
|
| 40 | #define _IO_BASE POISON_POINTER_DELTA
|
| 41 | #define _ISA_MEM_BASE 0
|
| 42 | #define PCI_DRAM_OFFSET 0
|
| 43 | #elif defined(CONFIG_PPC32)
|
| 44 | #define _IO_BASE isa_io_base
|
| 45 | #define _ISA_MEM_BASE isa_mem_base
|
| 46 | #define PCI_DRAM_OFFSET pci_dram_offset
|
| 47 | #else
|
| 48 | #define _IO_BASE pci_io_base
|
| 49 | #define _ISA_MEM_BASE isa_mem_base
|
| 50 | #define PCI_DRAM_OFFSET 0
|
| 51 | #endif
|
| 52 |
|
| 53 | extern unsigned long isa_io_base;
|
| 54 | extern unsigned long pci_io_base;
|
| 55 | extern unsigned long pci_dram_offset;
|
| 56 |
|
| 57 | extern resource_size_t isa_mem_base;
|
| 58 |
|
| 59 | |
| 60 | * is not set or addresses cannot be translated to MMIO. This is typically
|
| 61 | * set when the platform supports "special" PIO accesses via a non memory
|
| 62 | * mapped mechanism, and allows things like the early udbg UART code to
|
| 63 | * function.
|
| 64 |
|
| 65 | extern bool isa_io_special;
|
| 66 |
|
| 67 | #ifdef CONFIG_PPC32
|
| 68 | #ifdef CONFIG_PPC_INDIRECT_PIO
|
| 69 | #error CONFIG_PPC_INDIRECT_PIO is not yet supported on 32 bits
|
| 70 | #endif
|
| 71 | #endif
|
| 72 |
|
| 73 | |
| 74 | *
|
| 75 | * Low level MMIO accessors
|
| 76 | *
|
| 77 | * This provides the non-bus specific accessors to MMIO. Those are PowerPC
|
| 78 | * specific and thus shouldn't be used in generic code. The accessors
|
| 79 | * provided here are:
|
| 80 | *
|
| 81 | * in_8, in_le16, in_be16, in_le32, in_be32, in_le64, in_be64
|
| 82 | * out_8, out_le16, out_be16, out_le32, out_be32, out_le64, out_be64
|
| 83 | * _insb, _insw, _insl, _outsb, _outsw, _outsl
|
| 84 | *
|
| 85 | * Those operate directly on a kernel virtual address. Note that the prototype
|
| 86 | * for the out_* accessors has the arguments in opposite order from the usual
|
| 87 | * linux PCI accessors. Unlike those, they take the address first and the value
|
| 88 | * next.
|
| 89 |
|
| 90 |
|
| 91 |
|
| 92 | #ifdef CONFIG_PPC_KERNEL_PREFIXED
|
| 93 | #define DEF_MMIO_IN_X(name, size, insn) \
|
| 94 | static inline u##size name(const volatile u##size __iomem *addr) \
|
| 95 | { \
|
| 96 | u##size ret; \
|
| 97 | __asm__ __volatile__("sync;"#insn" %0,0,%1;twi 0,%0,0;isync" \
|
| 98 | : "=r" (ret) : "r" (addr) : "memory"); \
|
| 99 | return ret; \
|
| 100 | }
|
| 101 |
|
| 102 | #define DEF_MMIO_OUT_X(name, size, insn) \
|
| 103 | static inline void name(volatile u##size __iomem *addr, u##size val) \
|
| 104 | { \
|
| 105 | __asm__ __volatile__("sync;"#insn" %1,0,%0" \
|
| 106 | : : "r" (addr), "r" (val) : "memory"); \
|
| 107 | mmiowb_set_pending(); \
|
| 108 | }
|
| 109 |
|
| 110 | #define DEF_MMIO_IN_D(name, size, insn) \
|
| 111 | static inline u##size name(const volatile u##size __iomem *addr) \
|
| 112 | { \
|
| 113 | u##size ret; \
|
| 114 | __asm__ __volatile__("sync;"#insn" %0,0(%1);twi 0,%0,0;isync"\
|
| 115 | : "=r" (ret) : "b" (addr) : "memory"); \
|
| 116 | return ret; \
|
| 117 | }
|
| 118 |
|
| 119 | #define DEF_MMIO_OUT_D(name, size, insn) \
|
| 120 | static inline void name(volatile u##size __iomem *addr, u##size val) \
|
| 121 | { \
|
| 122 | __asm__ __volatile__("sync;"#insn" %1,0(%0)" \
|
| 123 | : : "b" (addr), "r" (val) : "memory"); \
|
| 124 | mmiowb_set_pending(); \
|
| 125 | }
|
| 126 | #else
|
| 127 | #define DEF_MMIO_IN_X(name, size, insn) \
|
| 128 | static inline u##size name(const volatile u##size __iomem *addr) \
|
| 129 | { \
|
| 130 | u##size ret; \
|
| 131 | __asm__ __volatile__("sync;"#insn" %0,%y1;twi 0,%0,0;isync" \
|
| 132 | : "=r" (ret) : "Z" (*addr) : "memory"); \
|
| 133 | return ret; \
|
| 134 | }
|
| 135 |
|
| 136 | #define DEF_MMIO_OUT_X(name, size, insn) \
|
| 137 | static inline void name(volatile u##size __iomem *addr, u##size val) \
|
| 138 | { \
|
| 139 | __asm__ __volatile__("sync;"#insn" %1,%y0" \
|
| 140 | : "=Z" (*addr) : "r" (val) : "memory"); \
|
| 141 | mmiowb_set_pending(); \
|
| 142 | }
|
| 143 |
|
| 144 | #define DEF_MMIO_IN_D(name, size, insn) \
|
| 145 | static inline u##size name(const volatile u##size __iomem *addr) \
|
| 146 | { \
|
| 147 | u##size ret; \
|
| 148 | __asm__ __volatile__("sync;"#insn"%U1%X1 %0,%1;twi 0,%0,0;isync"\
|
| 149 | : "=r" (ret) : "m<>" (*addr) : "memory"); \
|
| 150 | return ret; \
|
| 151 | }
|
| 152 |
|
| 153 | #define DEF_MMIO_OUT_D(name, size, insn) \
|
| 154 | static inline void name(volatile u##size __iomem *addr, u##size val) \
|
| 155 | { \
|
| 156 | __asm__ __volatile__("sync;"#insn"%U0%X0 %1,%0" \
|
| 157 | : "=m<>" (*addr) : "r" (val) : "memory"); \
|
| 158 | mmiowb_set_pending(); \
|
| 159 | }
|
| 160 | #endif
|
| 161 |
|
| 162 | DEF_MMIO_IN_D(in_8, 8, lbz);
|
| 163 | DEF_MMIO_OUT_D(out_8, 8, stb);
|
| 164 |
|
| 165 | #ifdef __BIG_ENDIAN__
|
| 166 | DEF_MMIO_IN_D(in_be16, 16, lhz);
|
| 167 | DEF_MMIO_IN_D(in_be32, 32, lwz);
|
| 168 | DEF_MMIO_IN_X(in_le16, 16, lhbrx);
|
| 169 | DEF_MMIO_IN_X(in_le32, 32, lwbrx);
|
| 170 |
|
| 171 | DEF_MMIO_OUT_D(out_be16, 16, sth);
|
| 172 | DEF_MMIO_OUT_D(out_be32, 32, stw);
|
| 173 | DEF_MMIO_OUT_X(out_le16, 16, sthbrx);
|
| 174 | DEF_MMIO_OUT_X(out_le32, 32, stwbrx);
|
| 175 | #else
|
| 176 | DEF_MMIO_IN_X(in_be16, 16, lhbrx);
|
| 177 | DEF_MMIO_IN_X(in_be32, 32, lwbrx);
|
| 178 | DEF_MMIO_IN_D(in_le16, 16, lhz);
|
| 179 | DEF_MMIO_IN_D(in_le32, 32, lwz);
|
| 180 |
|
| 181 | DEF_MMIO_OUT_X(out_be16, 16, sthbrx);
|
| 182 | DEF_MMIO_OUT_X(out_be32, 32, stwbrx);
|
| 183 | DEF_MMIO_OUT_D(out_le16, 16, sth);
|
| 184 | DEF_MMIO_OUT_D(out_le32, 32, stw);
|
| 185 |
|
| 186 | #endif
|
| 187 |
|
| 188 | #ifdef __powerpc64__
|
| 189 |
|
| 190 | #ifdef __BIG_ENDIAN__
|
| 191 | DEF_MMIO_OUT_D(out_be64, 64, std);
|
| 192 | DEF_MMIO_IN_D(in_be64, 64, ld);
|
| 193 |
|
| 194 |
|
| 195 | static inline u64 in_le64(const volatile u64 __iomem *addr)
|
| 196 | {
|
| 197 | return swab64(in_be64(addr));
|
| 198 | }
|
| 199 |
|
| 200 | static inline void out_le64(volatile u64 __iomem *addr, u64 val)
|
| 201 | {
|
| 202 | out_be64(addr, swab64(val));
|
| 203 | }
|
| 204 | #else
|
| 205 | DEF_MMIO_OUT_D(out_le64, 64, std);
|
| 206 | DEF_MMIO_IN_D(in_le64, 64, ld);
|
| 207 |
|
| 208 |
|
| 209 | static inline u64 in_be64(const volatile u64 __iomem *addr)
|
| 210 | {
|
| 211 | return swab64(in_le64(addr));
|
| 212 | }
|
| 213 |
|
| 214 | static inline void out_be64(volatile u64 __iomem *addr, u64 val)
|
| 215 | {
|
| 216 | out_le64(addr, swab64(val));
|
| 217 | }
|
| 218 |
|
| 219 | #endif
|
| 220 | #endif
|
| 221 |
|
| 222 | |
| 223 | * Low level IO stream instructions are defined out of line for now
|
| 224 |
|
| 225 | extern void _insb(const volatile u8 __iomem *addr, void *buf, long count);
|
| 226 | extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count);
|
| 227 | extern void _insw(const volatile u16 __iomem *addr, void *buf, long count);
|
| 228 | extern void _outsw(volatile u16 __iomem *addr, const void *buf, long count);
|
| 229 | extern void _insl(const volatile u32 __iomem *addr, void *buf, long count);
|
| 230 | extern void _outsl(volatile u32 __iomem *addr, const void *buf, long count);
|
| 231 |
|
| 232 | |
| 233 | * memset_io, memcpy_toio, memcpy_fromio base implementations are out of line
|
| 234 |
|
| 235 |
|
| 236 | extern void _memset_io(volatile void __iomem *addr, int c, unsigned long n);
|
| 237 | extern void _memcpy_fromio(void *dest, const volatile void __iomem *src,
|
| 238 | unsigned long n);
|
| 239 | extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
|
| 240 | unsigned long n);
|
| 241 |
|
| 242 | |
| 243 | *
|
| 244 | * PCI and standard ISA accessors
|
| 245 | *
|
| 246 | * Those are globally defined linux accessors for devices on PCI or ISA
|
| 247 | * busses. They follow the Linux defined semantics. The current implementation
|
| 248 | * for PowerPC is as close as possible to the x86 version of these, and thus
|
| 249 | * provides fairly heavy weight barriers for the non-raw versions
|
| 250 | *
|
| 251 | * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_PIO
|
| 252 | * is set allowing the platform to provide its own implementation of some
|
| 253 | * of the accessors.
|
| 254 |
|
| 255 |
|
| 256 | |
| 257 | * Include the EEH definitions when EEH is enabled only so they don't get
|
| 258 | * in the way when building for 32 bits
|
| 259 |
|
| 260 | #ifdef CONFIG_EEH
|
| 261 | #include <asm/eeh.h>
|
| 262 | #endif
|
| 263 |
|
| 264 | #define _IO_PORT(port) ((volatile void __iomem *)(_IO_BASE + (port)))
|
| 265 |
|
| 266 | #ifdef __powerpc64__
|
| 267 | |
| 268 | * Real mode versions of raw accessors. Those instructions are only supposed
|
| 269 | * to be used in hypervisor real mode as per the architecture spec.
|
| 270 |
|
| 271 | static inline void __raw_rm_writeb(u8 val, volatile void __iomem *paddr)
|
| 272 | {
|
| 273 | __asm__ __volatile__(".machine push; \
|
| 274 | .machine power6; \
|
| 275 | stbcix %0,0,%1; \
|
| 276 | .machine pop;"
|
| 277 | : : "r" (val), "r" (paddr) : "memory");
|
| 278 | }
|
| 279 |
|
| 280 | static inline void __raw_rm_writew(u16 val, volatile void __iomem *paddr)
|
| 281 | {
|
| 282 | __asm__ __volatile__(".machine push; \
|
| 283 | .machine power6; \
|
| 284 | sthcix %0,0,%1; \
|
| 285 | .machine pop;"
|
| 286 | : : "r" (val), "r" (paddr) : "memory");
|
| 287 | }
|
| 288 |
|
| 289 | static inline void __raw_rm_writel(u32 val, volatile void __iomem *paddr)
|
| 290 | {
|
| 291 | __asm__ __volatile__(".machine push; \
|
| 292 | .machine power6; \
|
| 293 | stwcix %0,0,%1; \
|
| 294 | .machine pop;"
|
| 295 | : : "r" (val), "r" (paddr) : "memory");
|
| 296 | }
|
| 297 |
|
| 298 | static inline void __raw_rm_writeq(u64 val, volatile void __iomem *paddr)
|
| 299 | {
|
| 300 | __asm__ __volatile__(".machine push; \
|
| 301 | .machine power6; \
|
| 302 | stdcix %0,0,%1; \
|
| 303 | .machine pop;"
|
| 304 | : : "r" (val), "r" (paddr) : "memory");
|
| 305 | }
|
| 306 |
|
| 307 | static inline void __raw_rm_writeq_be(u64 val, volatile void __iomem *paddr)
|
| 308 | {
|
| 309 | __raw_rm_writeq((__force u64)cpu_to_be64(val), paddr);
|
| 310 | }
|
| 311 |
|
| 312 | static inline u8 __raw_rm_readb(volatile void __iomem *paddr)
|
| 313 | {
|
| 314 | u8 ret;
|
| 315 | __asm__ __volatile__(".machine push; \
|
| 316 | .machine power6; \
|
| 317 | lbzcix %0,0, %1; \
|
| 318 | .machine pop;"
|
| 319 | : "=r" (ret) : "r" (paddr) : "memory");
|
| 320 | return ret;
|
| 321 | }
|
| 322 |
|
| 323 | static inline u16 __raw_rm_readw(volatile void __iomem *paddr)
|
| 324 | {
|
| 325 | u16 ret;
|
| 326 | __asm__ __volatile__(".machine push; \
|
| 327 | .machine power6; \
|
| 328 | lhzcix %0,0, %1; \
|
| 329 | .machine pop;"
|
| 330 | : "=r" (ret) : "r" (paddr) : "memory");
|
| 331 | return ret;
|
| 332 | }
|
| 333 |
|
| 334 | static inline u32 __raw_rm_readl(volatile void __iomem *paddr)
|
| 335 | {
|
| 336 | u32 ret;
|
| 337 | __asm__ __volatile__(".machine push; \
|
| 338 | .machine power6; \
|
| 339 | lwzcix %0,0, %1; \
|
| 340 | .machine pop;"
|
| 341 | : "=r" (ret) : "r" (paddr) : "memory");
|
| 342 | return ret;
|
| 343 | }
|
| 344 |
|
| 345 | static inline u64 __raw_rm_readq(volatile void __iomem *paddr)
|
| 346 | {
|
| 347 | u64 ret;
|
| 348 | __asm__ __volatile__(".machine push; \
|
| 349 | .machine power6; \
|
| 350 | ldcix %0,0, %1; \
|
| 351 | .machine pop;"
|
| 352 | : "=r" (ret) : "r" (paddr) : "memory");
|
| 353 | return ret;
|
| 354 | }
|
| 355 | #endif
|
| 356 |
|
| 357 | |
| 358 | *
|
| 359 | * PCI PIO and MMIO accessors.
|
| 360 | *
|
| 361 | *
|
| 362 | * On 32 bits, PIO operations have a recovery mechanism in case they trigger
|
| 363 | * machine checks (which they occasionally do when probing non existing
|
| 364 | * IO ports on some platforms, like PowerMac and 8xx).
|
| 365 | * I always found it to be of dubious reliability and I am tempted to get
|
| 366 | * rid of it one of these days. So if you think it's important to keep it,
|
| 367 | * please voice up asap. We never had it for 64 bits and I do not intend
|
| 368 | * to port it over
|
| 369 |
|
| 370 |
|
| 371 | #ifdef CONFIG_PPC32
|
| 372 |
|
| 373 | #define __do_in_asm(name, op) \
|
| 374 | static inline unsigned int name(unsigned int port) \
|
| 375 | { \
|
| 376 | unsigned int x; \
|
| 377 | __asm__ __volatile__( \
|
| 378 | "sync\n" \
|
| 379 | "0:" op " %0,0,%1\n" \
|
| 380 | "1: twi 0,%0,0\n" \
|
| 381 | "2: isync\n" \
|
| 382 | "3: nop\n" \
|
| 383 | "4:\n" \
|
| 384 | ".section .fixup,\"ax\"\n" \
|
| 385 | "5: li %0,-1\n" \
|
| 386 | " b 4b\n" \
|
| 387 | ".previous\n" \
|
| 388 | EX_TABLE(0b, 5b) \
|
| 389 | EX_TABLE(1b, 5b) \
|
| 390 | EX_TABLE(2b, 5b) \
|
| 391 | EX_TABLE(3b, 5b) \
|
| 392 | : "=&r" (x) \
|
| 393 | : "r" (port + _IO_BASE) \
|
| 394 | : "memory"); \
|
| 395 | return x; \
|
| 396 | }
|
| 397 |
|
| 398 | #define __do_out_asm(name, op) \
|
| 399 | static inline void name(unsigned int val, unsigned int port) \
|
| 400 | { \
|
| 401 | __asm__ __volatile__( \
|
| 402 | "sync\n" \
|
| 403 | "0:" op " %0,0,%1\n" \
|
| 404 | "1: sync\n" \
|
| 405 | "2:\n" \
|
| 406 | EX_TABLE(0b, 2b) \
|
| 407 | EX_TABLE(1b, 2b) \
|
| 408 | : : "r" (val), "r" (port + _IO_BASE) \
|
| 409 | : "memory"); \
|
| 410 | }
|
| 411 |
|
| 412 | __do_in_asm(_rec_inb, "lbzx")
|
| 413 | __do_in_asm(_rec_inw, "lhbrx")
|
| 414 | __do_in_asm(_rec_inl, "lwbrx")
|
| 415 | __do_out_asm(_rec_outb, "stbx")
|
| 416 | __do_out_asm(_rec_outw, "sthbrx")
|
| 417 | __do_out_asm(_rec_outl, "stwbrx")
|
| 418 |
|
| 419 | #endif
|
| 420 |
|
| 421 | |
| 422 | * for each of the defined accessors. Some of them use the out_* functions
|
| 423 | * directly, some of them still use EEH, though we might change that in the
|
| 424 | * future. Those macros below provide the necessary argument swapping and
|
| 425 | * handling of the IO base for PIO.
|
| 426 | *
|
| 427 | * They are themselves used by the macros that define the actual accessors
|
| 428 | * and can be used by the hooks if any.
|
| 429 | *
|
| 430 | * Note that PIO operations are always defined in terms of their corresonding
|
| 431 | * MMIO operations. That allows platforms like iSeries who want to modify the
|
| 432 | * behaviour of both to only hook on the MMIO version and get both. It's also
|
| 433 | * possible to hook directly at the toplevel PIO operation if they have to
|
| 434 | * be handled differently
|
| 435 |
|
| 436 |
|
| 437 | #ifdef CONFIG_EEH
|
| 438 | #define __do_readb(addr) eeh_readb(addr)
|
| 439 | #define __do_readw(addr) eeh_readw(addr)
|
| 440 | #define __do_readl(addr) eeh_readl(addr)
|
| 441 | #define __do_readq(addr) eeh_readq(addr)
|
| 442 | #define __do_readw_be(addr) eeh_readw_be(addr)
|
| 443 | #define __do_readl_be(addr) eeh_readl_be(addr)
|
| 444 | #define __do_readq_be(addr) eeh_readq_be(addr)
|
| 445 | #else
|
| 446 | #define __do_readb(addr) in_8(addr)
|
| 447 | #define __do_readw(addr) in_le16(addr)
|
| 448 | #define __do_readl(addr) in_le32(addr)
|
| 449 | #define __do_readq(addr) in_le64(addr)
|
| 450 | #define __do_readw_be(addr) in_be16(addr)
|
| 451 | #define __do_readl_be(addr) in_be32(addr)
|
| 452 | #define __do_readq_be(addr) in_be64(addr)
|
| 453 | #endif
|
| 454 |
|
| 455 | #ifdef CONFIG_PPC32
|
| 456 | #define __do_outb(val, port) _rec_outb(val, port)
|
| 457 | #define __do_outw(val, port) _rec_outw(val, port)
|
| 458 | #define __do_outl(val, port) _rec_outl(val, port)
|
| 459 | #define __do_inb(port) _rec_inb(port)
|
| 460 | #define __do_inw(port) _rec_inw(port)
|
| 461 | #define __do_inl(port) _rec_inl(port)
|
| 462 | #else
|
| 463 | #define __do_outb(val, port) writeb(val,_IO_PORT(port));
|
| 464 | #define __do_outw(val, port) writew(val,_IO_PORT(port));
|
| 465 | #define __do_outl(val, port) writel(val,_IO_PORT(port));
|
| 466 | #define __do_inb(port) readb(_IO_PORT(port));
|
| 467 | #define __do_inw(port) readw(_IO_PORT(port));
|
| 468 | #define __do_inl(port) readl(_IO_PORT(port));
|
| 469 | #endif
|
| 470 |
|
| 471 | #ifdef CONFIG_EEH
|
| 472 | #define __do_readsb(a, b, n) eeh_readsb(a, (b), (n))
|
| 473 | #define __do_readsw(a, b, n) eeh_readsw(a, (b), (n))
|
| 474 | #define __do_readsl(a, b, n) eeh_readsl(a, (b), (n))
|
| 475 | #else
|
| 476 | #define __do_readsb(a, b, n) _insb(a, (b), (n))
|
| 477 | #define __do_readsw(a, b, n) _insw(a, (b), (n))
|
| 478 | #define __do_readsl(a, b, n) _insl(a, (b), (n))
|
| 479 | #endif
|
| 480 | #define __do_writesb(a, b, n) _outsb(a, (b), (n))
|
| 481 | #define __do_writesw(a, b, n) _outsw(a, (b), (n))
|
| 482 | #define __do_writesl(a, b, n) _outsl(a, (b), (n))
|
| 483 |
|
| 484 | #define __do_insb(p, b, n) readsb(_IO_PORT(p), (b), (n))
|
| 485 | #define __do_insw(p, b, n) readsw(_IO_PORT(p), (b), (n))
|
| 486 | #define __do_insl(p, b, n) readsl(_IO_PORT(p), (b), (n))
|
| 487 | #define __do_outsb(p, b, n) writesb(_IO_PORT(p),(b),(n))
|
| 488 | #define __do_outsw(p, b, n) writesw(_IO_PORT(p),(b),(n))
|
| 489 | #define __do_outsl(p, b, n) writesl(_IO_PORT(p),(b),(n))
|
| 490 |
|
| 491 | #ifdef CONFIG_EEH
|
| 492 | #define __do_memcpy_fromio(dst, src, n) \
|
| 493 | eeh_memcpy_fromio(dst, src, n)
|
| 494 | #else
|
| 495 | #define __do_memcpy_fromio(dst, src, n) \
|
| 496 | _memcpy_fromio(dst, src, n)
|
| 497 | #endif
|
| 498 |
|
| 499 | static inline u8 readb(const volatile void __iomem *addr)
|
| 500 | {
|
| 501 | return __do_readb(addr);
|
| 502 | }
|
| 503 | #define readb readb
|
| 504 |
|
| 505 | static inline u16 readw(const volatile void __iomem *addr)
|
| 506 | {
|
| 507 | return __do_readw(addr);
|
| 508 | }
|
| 509 | #define readw readw
|
| 510 |
|
| 511 | static inline u32 readl(const volatile void __iomem *addr)
|
| 512 | {
|
| 513 | return __do_readl(addr);
|
| 514 | }
|
| 515 | #define readl readl
|
| 516 |
|
| 517 | static inline u16 readw_be(const volatile void __iomem *addr)
|
| 518 | {
|
| 519 | return __do_readw_be(addr);
|
| 520 | }
|
| 521 |
|
| 522 | static inline u32 readl_be(const volatile void __iomem *addr)
|
| 523 | {
|
| 524 | return __do_readl_be(addr);
|
| 525 | }
|
| 526 |
|
| 527 | static inline void writeb(u8 val, volatile void __iomem *addr)
|
| 528 | {
|
| 529 | out_8(addr, val);
|
| 530 | }
|
| 531 | #define writeb writeb
|
| 532 |
|
| 533 | static inline void writew(u16 val, volatile void __iomem *addr)
|
| 534 | {
|
| 535 | out_le16(addr, val);
|
| 536 | }
|
| 537 | #define writew writew
|
| 538 |
|
| 539 | static inline void writel(u32 val, volatile void __iomem *addr)
|
| 540 | {
|
| 541 | out_le32(addr, val);
|
| 542 | }
|
| 543 | #define writel writel
|
| 544 |
|
| 545 | static inline void writew_be(u16 val, volatile void __iomem *addr)
|
| 546 | {
|
| 547 | out_be16(addr, val);
|
| 548 | }
|
| 549 |
|
| 550 | static inline void writel_be(u32 val, volatile void __iomem *addr)
|
| 551 | {
|
| 552 | out_be32(addr, val);
|
| 553 | }
|
| 554 |
|
| 555 | static inline void readsb(const volatile void __iomem *a, void *b, unsigned long c)
|
| 556 | {
|
| 557 | __do_readsb(a, b, c);
|
| 558 | }
|
| 559 | #define readsb readsb
|
| 560 |
|
| 561 | static inline void readsw(const volatile void __iomem *a, void *b, unsigned long c)
|
| 562 | {
|
| 563 | __do_readsw(a, b, c);
|
| 564 | }
|
| 565 | #define readsw readsw
|
| 566 |
|
| 567 | static inline void readsl(const volatile void __iomem *a, void *b, unsigned long c)
|
| 568 | {
|
| 569 | __do_readsl(a, b, c);
|
| 570 | }
|
| 571 | #define readsl readsl
|
| 572 |
|
| 573 | static inline void writesb(volatile void __iomem *a, const void *b, unsigned long c)
|
| 574 | {
|
| 575 | __do_writesb(a, b, c);
|
| 576 | }
|
| 577 | #define writesb writesb
|
| 578 |
|
| 579 | static inline void writesw(volatile void __iomem *a, const void *b, unsigned long c)
|
| 580 | {
|
| 581 | __do_writesw(a, b, c);
|
| 582 | }
|
| 583 | #define writesw writesw
|
| 584 |
|
| 585 | static inline void writesl(volatile void __iomem *a, const void *b, unsigned long c)
|
| 586 | {
|
| 587 | __do_writesl(a, b, c);
|
| 588 | }
|
| 589 | #define writesl writesl
|
| 590 |
|
| 591 | static inline void memset_io(volatile void __iomem *a, int c, unsigned long n)
|
| 592 | {
|
| 593 | _memset_io(a, c, n);
|
| 594 | }
|
| 595 | #define memset_io memset_io
|
| 596 |
|
| 597 | static inline void memcpy_fromio(void *d, const volatile void __iomem *s, unsigned long n)
|
| 598 | {
|
| 599 | __do_memcpy_fromio(d, s, n);
|
| 600 | }
|
| 601 | #define memcpy_fromio memcpy_fromio
|
| 602 |
|
| 603 | static inline void memcpy_toio(volatile void __iomem *d, const void *s, unsigned long n)
|
| 604 | {
|
| 605 | _memcpy_toio(d, s, n);
|
| 606 | }
|
| 607 | #define memcpy_toio memcpy_toio
|
| 608 |
|
| 609 | #ifdef __powerpc64__
|
| 610 | static inline u64 readq(const volatile void __iomem *addr)
|
| 611 | {
|
| 612 | return __do_readq(addr);
|
| 613 | }
|
| 614 |
|
| 615 | static inline u64 readq_be(const volatile void __iomem *addr)
|
| 616 | {
|
| 617 | return __do_readq_be(addr);
|
| 618 | }
|
| 619 |
|
| 620 | static inline void writeq(u64 val, volatile void __iomem *addr)
|
| 621 | {
|
| 622 | out_le64(addr, val);
|
| 623 | }
|
| 624 |
|
| 625 | static inline void writeq_be(u64 val, volatile void __iomem *addr)
|
| 626 | {
|
| 627 | out_be64(addr, val);
|
| 628 | }
|
| 629 | #endif
|
| 630 |
|
| 631 | #ifdef CONFIG_PPC_INDIRECT_PIO
|
| 632 | #define DEF_PCI_HOOK(x) x
|
| 633 | #else
|
| 634 | #define DEF_PCI_HOOK(x) NULL
|
| 635 | #endif
|
| 636 |
|
| 637 |
|
| 638 | extern struct ppc_pci_io {
|
| 639 |
|
| 640 | #define DEF_PCI_AC_RET(name, ret, at, al) ret (*name) at;
|
| 641 | #define DEF_PCI_AC_NORET(name, at, al) void (*name) at;
|
| 642 |
|
| 643 | #include <asm/io-defs.h>
|
| 644 |
|
| 645 | #undef DEF_PCI_AC_RET
|
| 646 | #undef DEF_PCI_AC_NORET
|
| 647 |
|
| 648 | } ppc_pci_io;
|
| 649 |
|
| 650 |
|
| 651 | #define DEF_PCI_AC_RET(name, ret, at, al) \
|
| 652 | static inline ret name at \
|
| 653 | { \
|
| 654 | if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \
|
| 655 | return ppc_pci_io.name al; \
|
| 656 | return __do_##name al; \
|
| 657 | }
|
| 658 |
|
| 659 | #define DEF_PCI_AC_NORET(name, at, al) \
|
| 660 | static inline void name at \
|
| 661 | { \
|
| 662 | if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \
|
| 663 | ppc_pci_io.name al; \
|
| 664 | else \
|
| 665 | __do_##name al; \
|
| 666 | }
|
| 667 |
|
| 668 | #include <asm/io-defs.h>
|
| 669 |
|
| 670 | #undef DEF_PCI_AC_RET
|
| 671 | #undef DEF_PCI_AC_NORET
|
| 672 |
|
| 673 | |
| 674 | #define inb inb
|
| 675 | #define inw inw
|
| 676 | #define inl inl
|
| 677 | #define outb outb
|
| 678 | #define outw outw
|
| 679 | #define outl outl
|
| 680 | #define insb insb
|
| 681 | #define insw insw
|
| 682 | #define insl insl
|
| 683 | #define outsb outsb
|
| 684 | #define outsw outsw
|
| 685 | #define outsl outsl
|
| 686 | #ifdef __powerpc64__
|
| 687 | #define readq readq
|
| 688 | #define writeq writeq
|
| 689 | #endif
|
| 690 |
|
| 691 | |
| 692 | * We don't do relaxed operations yet, at least not with this semantic
|
| 693 |
|
| 694 | #define readb_relaxed(addr) readb(addr)
|
| 695 | #define readw_relaxed(addr) readw(addr)
|
| 696 | #define readl_relaxed(addr) readl(addr)
|
| 697 | #define readq_relaxed(addr) readq(addr)
|
| 698 | #define writeb_relaxed(v, addr) writeb(v, addr)
|
| 699 | #define writew_relaxed(v, addr) writew(v, addr)
|
| 700 | #define writel_relaxed(v, addr) writel(v, addr)
|
| 701 | #define writeq_relaxed(v, addr) writeq(v, addr)
|
| 702 |
|
| 703 | #ifndef CONFIG_GENERIC_IOMAP
|
| 704 | |
| 705 | * Here comes the implementation of the IOMAP interfaces.
|
| 706 |
|
| 707 | static inline unsigned int ioread16be(const void __iomem *addr)
|
| 708 | {
|
| 709 | return readw_be(addr);
|
| 710 | }
|
| 711 | #define ioread16be ioread16be
|
| 712 |
|
| 713 | static inline unsigned int ioread32be(const void __iomem *addr)
|
| 714 | {
|
| 715 | return readl_be(addr);
|
| 716 | }
|
| 717 | #define ioread32be ioread32be
|
| 718 |
|
| 719 | #ifdef __powerpc64__
|
| 720 | static inline u64 ioread64be(const void __iomem *addr)
|
| 721 | {
|
| 722 | return readq_be(addr);
|
| 723 | }
|
| 724 | #define ioread64be ioread64be
|
| 725 | #endif
|
| 726 |
|
| 727 | static inline void iowrite16be(u16 val, void __iomem *addr)
|
| 728 | {
|
| 729 | writew_be(val, addr);
|
| 730 | }
|
| 731 | #define iowrite16be iowrite16be
|
| 732 |
|
| 733 | static inline void iowrite32be(u32 val, void __iomem *addr)
|
| 734 | {
|
| 735 | writel_be(val, addr);
|
| 736 | }
|
| 737 | #define iowrite32be iowrite32be
|
| 738 |
|
| 739 | #ifdef __powerpc64__
|
| 740 | static inline void iowrite64be(u64 val, void __iomem *addr)
|
| 741 | {
|
| 742 | writeq_be(val, addr);
|
| 743 | }
|
| 744 | #define iowrite64be iowrite64be
|
| 745 | #endif
|
| 746 |
|
| 747 | struct pci_dev;
|
| 748 | void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
|
| 749 | #define pci_iounmap pci_iounmap
|
| 750 | void __iomem *ioport_map(unsigned long port, unsigned int len);
|
| 751 | #define ioport_map ioport_map
|
| 752 | #endif
|
| 753 |
|
| 754 | static inline void iosync(void)
|
| 755 | {
|
| 756 | __asm__ __volatile__ ("sync" : : : "memory");
|
| 757 | }
|
| 758 |
|
| 759 | |
| 760 | * No distinction between read/write on PPC; use eieio for all three.
|
| 761 | * Those are fairly week though. They don't provide a barrier between
|
| 762 | * MMIO and cacheable storage nor do they provide a barrier vs. locks,
|
| 763 | * they only provide barriers between 2 __raw MMIO operations and
|
| 764 | * possibly break write combining.
|
| 765 |
|
| 766 | #define iobarrier_rw() eieio()
|
| 767 | #define iobarrier_r() eieio()
|
| 768 | #define iobarrier_w() eieio()
|
| 769 |
|
| 770 |
|
| 771 | |
| 772 | * output pause versions need a delay at least for the
|
| 773 | * w83c105 ide controller in a p610.
|
| 774 |
|
| 775 | #define inb_p(port) inb(port)
|
| 776 | #define outb_p(val, port) (udelay(1), outb((val), (port)))
|
| 777 | #define inw_p(port) inw(port)
|
| 778 | #define outw_p(val, port) (udelay(1), outw((val), (port)))
|
| 779 | #define inl_p(port) inl(port)
|
| 780 | #define outl_p(val, port) (udelay(1), outl((val), (port)))
|
| 781 |
|
| 782 |
|
| 783 | #define IO_SPACE_LIMIT ~(0UL)
|
| 784 |
|
| 785 | |
| 786 | * ioremap - map bus memory into CPU space
|
| 787 | * @address: bus address of the memory
|
| 788 | * @size: size of the resource to map
|
| 789 | *
|
| 790 | * ioremap performs a platform specific sequence of operations to
|
| 791 | * make bus memory CPU accessible via the readb/readw/readl/writeb/
|
| 792 | * writew/writel functions and the other mmio helpers. The returned
|
| 793 | * address is not guaranteed to be usable directly as a virtual
|
| 794 | * address.
|
| 795 | *
|
| 796 | * We provide a few variations of it:
|
| 797 | *
|
| 798 | * * ioremap is the standard one and provides non-cacheable guarded mappings
|
| 799 | * and can be hooked by the platform via ppc_md
|
| 800 | *
|
| 801 | * * ioremap_prot allows to specify the page flags as an argument and can
|
| 802 | * also be hooked by the platform via ppc_md.
|
| 803 | *
|
| 804 | * * ioremap_wc enables write combining
|
| 805 | *
|
| 806 | * * ioremap_wt enables write through
|
| 807 | *
|
| 808 | * * ioremap_coherent maps coherent cached memory
|
| 809 | *
|
| 810 | * * iounmap undoes such a mapping and can be hooked
|
| 811 | *
|
| 812 | * * __ioremap_caller is the same as above but takes an explicit caller
|
| 813 | * reference rather than using __builtin_return_address(0)
|
| 814 | *
|
| 815 |
|
| 816 | extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
|
| 817 | #define ioremap ioremap
|
| 818 | #define ioremap_prot ioremap_prot
|
| 819 | extern void __iomem *ioremap_wc(phys_addr_t address, unsigned long size);
|
| 820 | #define ioremap_wc ioremap_wc
|
| 821 |
|
| 822 | #ifdef CONFIG_PPC32
|
| 823 | void __iomem *ioremap_wt(phys_addr_t address, unsigned long size);
|
| 824 | #define ioremap_wt ioremap_wt
|
| 825 | #endif
|
| 826 |
|
| 827 | void __iomem *ioremap_coherent(phys_addr_t address, unsigned long size);
|
| 828 | #define ioremap_cache(addr, size) \
|
| 829 | ioremap_prot((addr), (size), PAGE_KERNEL)
|
| 830 |
|
| 831 | #define iounmap iounmap
|
| 832 |
|
| 833 | void __iomem *ioremap_phb(phys_addr_t paddr, unsigned long size);
|
| 834 |
|
| 835 | int early_ioremap_range(unsigned long ea, phys_addr_t pa,
|
| 836 | unsigned long size, pgprot_t prot);
|
| 837 |
|
| 838 | extern void __iomem *__ioremap_caller(phys_addr_t, unsigned long size,
|
| 839 | pgprot_t prot, void *caller);
|
| 840 |
|
| 841 | |
| 842 | * When CONFIG_PPC_INDIRECT_PIO is set, we use the generic iomap implementation
|
| 843 | * which needs some additional definitions here. They basically allow PIO
|
| 844 | * space overall to be 1GB. This will work as long as we never try to use
|
| 845 | * iomap to map MMIO below 1GB which should be fine on ppc64
|
| 846 |
|
| 847 | #define HAVE_ARCH_PIO_SIZE 1
|
| 848 | #define PIO_OFFSET 0x00000000UL
|
| 849 | #define PIO_MASK (FULL_IO_SIZE - 1)
|
| 850 | #define PIO_RESERVED (FULL_IO_SIZE)
|
| 851 |
|
| 852 | #define mmio_read16be(addr) readw_be(addr)
|
| 853 | #define mmio_read32be(addr) readl_be(addr)
|
| 854 | #define mmio_read64be(addr) readq_be(addr)
|
| 855 | #define mmio_write16be(val, addr) writew_be(val, addr)
|
| 856 | #define mmio_write32be(val, addr) writel_be(val, addr)
|
| 857 | #define mmio_write64be(val, addr) writeq_be(val, addr)
|
| 858 | #define mmio_insb(addr, dst, count) readsb(addr, dst, count)
|
| 859 | #define mmio_insw(addr, dst, count) readsw(addr, dst, count)
|
| 860 | #define mmio_insl(addr, dst, count) readsl(addr, dst, count)
|
| 861 | #define mmio_outsb(addr, src, count) writesb(addr, src, count)
|
| 862 | #define mmio_outsw(addr, src, count) writesw(addr, src, count)
|
| 863 | #define mmio_outsl(addr, src, count) writesl(addr, src, count)
|
| 864 |
|
| 865 | |
| 866 | * virt_to_phys - map virtual addresses to physical
|
| 867 | * @address: address to remap
|
| 868 | *
|
| 869 | * The returned physical address is the physical (CPU) mapping for
|
| 870 | * the memory address given. It is only valid to use this function on
|
| 871 | * addresses directly mapped or allocated via kmalloc.
|
| 872 | *
|
| 873 | * This function does not give bus mappings for DMA transfers. In
|
| 874 | * almost all conceivable cases a device driver should not be using
|
| 875 | * this function
|
| 876 |
|
| 877 | static inline unsigned long virt_to_phys(const volatile void * address)
|
| 878 | {
|
| 879 | WARN_ON(IS_ENABLED(CONFIG_DEBUG_VIRTUAL) && !virt_addr_valid(address));
|
| 880 |
|
| 881 | return __pa((unsigned long)address);
|
| 882 | }
|
| 883 | #define virt_to_phys virt_to_phys
|
| 884 |
|
| 885 | |
| 886 | * phys_to_virt - map physical address to virtual
|
| 887 | * @address: address to remap
|
| 888 | *
|
| 889 | * The returned virtual address is a current CPU mapping for
|
| 890 | * the memory address given. It is only valid to use this function on
|
| 891 | * addresses that have a kernel mapping
|
| 892 | *
|
| 893 | * This function does not handle bus mappings for DMA transfers. In
|
| 894 | * almost all conceivable cases a device driver should not be using
|
| 895 | * this function
|
| 896 |
|
| 897 | static inline void * phys_to_virt(unsigned long address)
|
| 898 | {
|
| 899 | return (void *)__va(address);
|
| 900 | }
|
| 901 | #define phys_to_virt phys_to_virt
|
| 902 |
|
| 903 | |
| 904 | * 32 bits still uses virt_to_bus() for its implementation of DMA
|
| 905 | * mappings se we have to keep it defined here. We also have some old
|
| 906 | * drivers (shame shame shame) that use bus_to_virt() and haven't been
|
| 907 | * fixed yet so I need to define it here.
|
| 908 |
|
| 909 | #ifdef CONFIG_PPC32
|
| 910 |
|
| 911 | static inline unsigned long virt_to_bus(volatile void * address)
|
| 912 | {
|
| 913 | if (address == NULL)
|
| 914 | return 0;
|
| 915 | return __pa(address) + PCI_DRAM_OFFSET;
|
| 916 | }
|
| 917 | #define virt_to_bus virt_to_bus
|
| 918 |
|
| 919 | static inline void * bus_to_virt(unsigned long address)
|
| 920 | {
|
| 921 | if (address == 0)
|
| 922 | return NULL;
|
| 923 | return __va(address - PCI_DRAM_OFFSET);
|
| 924 | }
|
| 925 | #define bus_to_virt bus_to_virt
|
| 926 |
|
| 927 | #endif
|
| 928 |
|
| 929 |
|
| 930 | #define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) | (_v))
|
| 931 | #define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v))
|
| 932 |
|
| 933 | #define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) | (_v))
|
| 934 | #define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v))
|
| 935 |
|
| 936 | #define setbits8(_addr, _v) out_8((_addr), in_8(_addr) | (_v))
|
| 937 | #define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v))
|
| 938 |
|
| 939 | |
| 940 | * set multiple bits in a register using a single read-modify-write. These
|
| 941 | * macros can also be used to set a multiple-bit bit pattern using a mask,
|
| 942 | * by specifying the mask in the 'clear' parameter and the new bit pattern
|
| 943 | * in the 'set' parameter.
|
| 944 |
|
| 945 |
|
| 946 | #define clrsetbits(type, addr, clear, set) \
|
| 947 | out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
|
| 948 |
|
| 949 | #ifdef __powerpc64__
|
| 950 | #define clrsetbits_be64(addr, clear, set) clrsetbits(be64, addr, clear, set)
|
| 951 | #define clrsetbits_le64(addr, clear, set) clrsetbits(le64, addr, clear, set)
|
| 952 | #endif
|
| 953 |
|
| 954 | #define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
|
| 955 | #define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
|
| 956 |
|
| 957 | #define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
|
| 958 | #define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
|
| 959 |
|
| 960 | #define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
|
| 961 |
|
| 962 | #include <asm-generic/io.h>
|
| 963 |
|
| 964 | #ifdef __powerpc64__
|
| 965 | static inline void __raw_writeq_be(unsigned long v, volatile void __iomem *addr)
|
| 966 | {
|
| 967 | __raw_writeq((__force unsigned long)cpu_to_be64(v), addr);
|
| 968 | }
|
| 969 | #define __raw_writeq_be __raw_writeq_be
|
| 970 | #endif |
| 971 |
|
| 972 | #endif
|
| 973 |
|
| 974 | #endif
|