projects/linux·blob master · refs

1371 lines · 34.1 KiB

1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * MPC83xx/85xx/86xx PCI/PCIE support routing.
4 *
5 * Copyright 2007-2012 Freescale Semiconductor, Inc.
6 * Copyright 2008-2009 MontaVista Software, Inc.
7 *
8 * Initial author: Xianghua Xiao <[email protected]>
9 * Recode: ZHANG WEI <[email protected]>
10 * Rewrite the routing for Frescale PCI and PCI Express
11 * Roy Zang <[email protected]>
12 * MPC83xx PCI-Express support:
13 * Tony Li <[email protected]>
14 * Anton Vorontsov <[email protected]>
15 */
16#include <linux/kernel.h>
17#include <linux/pci.h>
18#include <linux/delay.h>
19#include <linux/string.h>
20#include <linux/fsl/edac.h>
21#include <linux/init.h>
22#include <linux/interrupt.h>
23#include <linux/memblock.h>
24#include <linux/log2.h>
25#include <linux/of_address.h>
26#include <linux/of_irq.h>
27#include <linux/platform_device.h>
28#include <linux/slab.h>
29#include <linux/suspend.h>
30#include <linux/syscore_ops.h>
31#include <linux/uaccess.h>
32
33#include <asm/io.h>
34#include <asm/pci-bridge.h>
35#include <asm/ppc-pci.h>
36#include <asm/machdep.h>
37#include <asm/mpc85xx.h>
38#include <asm/disassemble.h>
39#include <asm/ppc-opcode.h>
40#include <asm/swiotlb.h>
41#include <asm/setup.h>
42#include <sysdev/fsl_soc.h>
43#include <sysdev/fsl_pci.h>
44
45static int fsl_pcie_bus_fixup, is_mpc83xx_pci;
46
47static void quirk_fsl_pcie_early(struct pci_dev *dev)
48{
49 u8 hdr_type;
50
51 /* if we aren't a PCIe don't bother */
52 if (!pci_is_pcie(dev))
53 return;
54
55 /* if we aren't in host mode don't bother */
56 pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type);
57 if ((hdr_type & PCI_HEADER_TYPE_MASK) != PCI_HEADER_TYPE_BRIDGE)
58 return;
59
60 dev->class = PCI_CLASS_BRIDGE_PCI_NORMAL;
61 fsl_pcie_bus_fixup = 1;
62 return;
63}
64
65static int fsl_indirect_read_config(struct pci_bus *, unsigned int,
66 int, int, u32 *);
67
68static int fsl_pcie_check_link(struct pci_controller *hose)
69{
70 u32 val = 0;
71
72 if (hose->indirect_type & PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK) {
73 if (hose->ops->read == fsl_indirect_read_config)
74 __indirect_read_config(hose, hose->first_busno, 0,
75 PCIE_LTSSM, 4, &val);
76 else
77 early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val);
78 if (val < PCIE_LTSSM_L0)
79 return 1;
80 } else {
81 struct ccsr_pci __iomem *pci = hose->private_data;
82 /* for PCIe IP rev 3.0 or greater use CSR0 for link state */
83 val = (in_be32(&pci->pex_csr0) & PEX_CSR0_LTSSM_MASK)
84 >> PEX_CSR0_LTSSM_SHIFT;
85 if (val != PEX_CSR0_LTSSM_L0)
86 return 1;
87 }
88
89 return 0;
90}
91
92static int fsl_indirect_read_config(struct pci_bus *bus, unsigned int devfn,
93 int offset, int len, u32 *val)
94{
95 struct pci_controller *hose = pci_bus_to_host(bus);
96
97 if (fsl_pcie_check_link(hose))
98 hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
99 else
100 hose->indirect_type &= ~PPC_INDIRECT_TYPE_NO_PCIE_LINK;
101
102 return indirect_read_config(bus, devfn, offset, len, val);
103}
104
105#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
106
107static struct pci_ops fsl_indirect_pcie_ops =
108{
109 .read = fsl_indirect_read_config,
110 .write = indirect_write_config,
111};
112
113static u64 pci64_dma_offset;
114
115#ifdef CONFIG_SWIOTLB
116static void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
117{
118 struct pci_controller *hose = pci_bus_to_host(pdev->bus);
119
120 pdev->dev.bus_dma_limit =
121 hose->dma_window_base_cur + hose->dma_window_size - 1;
122}
123
124static void setup_swiotlb_ops(struct pci_controller *hose)
125{
126 if (ppc_swiotlb_enable)
127 hose->controller_ops.dma_dev_setup = pci_dma_dev_setup_swiotlb;
128}
129#else
130static inline void setup_swiotlb_ops(struct pci_controller *hose) {}
131#endif
132
133static void fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask)
134{
135 /*
136 * Fix up PCI devices that are able to DMA to the large inbound
137 * mapping that allows addressing any RAM address from across PCI.
138 */
139 if (dev_is_pci(dev) && dma_mask >= pci64_dma_offset * 2 - 1) {
140 dev->bus_dma_limit = 0;
141 dev->archdata.dma_offset = pci64_dma_offset;
142 }
143}
144
145static int setup_one_atmu(struct ccsr_pci __iomem *pci,
146 unsigned int index, const struct resource *res,
147 resource_size_t offset)
148{
149 resource_size_t pci_addr = res->start - offset;
150 resource_size_t phys_addr = res->start;
151 resource_size_t size = resource_size(res);
152 u32 flags = 0x80044000; /* enable & mem R/W */
153 unsigned int i;
154
155 pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n",
156 (u64)res->start, (u64)size);
157
158 if (res->flags & IORESOURCE_PREFETCH)
159 flags |= 0x10000000; /* enable relaxed ordering */
160
161 for (i = 0; size > 0; i++) {
162 unsigned int bits = min_t(u32, ilog2(size),
163 __ffs(pci_addr | phys_addr));
164
165 if (index + i >= 5)
166 return -1;
167
168 out_be32(&pci->pow[index + i].potar, pci_addr >> 12);
169 out_be32(&pci->pow[index + i].potear, (u64)pci_addr >> 44);
170 out_be32(&pci->pow[index + i].powbar, phys_addr >> 12);
171 out_be32(&pci->pow[index + i].powar, flags | (bits - 1));
172
173 pci_addr += (resource_size_t)1U << bits;
174 phys_addr += (resource_size_t)1U << bits;
175 size -= (resource_size_t)1U << bits;
176 }
177
178 return i;
179}
180
181static bool is_kdump(void)
182{
183 struct device_node *node;
184 bool ret;
185
186 node = of_find_node_by_type(NULL, "memory");
187 if (!node) {
188 WARN_ON_ONCE(1);
189 return false;
190 }
191
192 ret = of_property_read_bool(node, "linux,usable-memory");
193 of_node_put(node);
194
195 return ret;
196}
197
198/* atmu setup for fsl pci/pcie controller */
199static void setup_pci_atmu(struct pci_controller *hose)
200{
201 struct ccsr_pci __iomem *pci = hose->private_data;
202 int i, j, n, mem_log, win_idx = 3, start_idx = 1, end_idx = 4;
203 u64 mem, sz, paddr_hi = 0;
204 u64 offset = 0, paddr_lo = ULLONG_MAX;
205 u32 pcicsrbar = 0, pcicsrbar_sz;
206 u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL |
207 PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
208 const u64 *reg;
209 int len;
210 bool setup_inbound;
211
212 /*
213 * If this is kdump, we don't want to trigger a bunch of PCI
214 * errors by closing the window on in-flight DMA.
215 *
216 * We still run most of the function's logic so that things like
217 * hose->dma_window_size still get set.
218 */
219 setup_inbound = !is_kdump();
220
221 if (of_device_is_compatible(hose->dn, "fsl,bsc9132-pcie")) {
222 /*
223 * BSC9132 Rev1.0 has an issue where all the PEX inbound
224 * windows have implemented the default target value as 0xf
225 * for CCSR space.In all Freescale legacy devices the target
226 * of 0xf is reserved for local memory space. 9132 Rev1.0
227 * now has local memory space mapped to target 0x0 instead of
228 * 0xf. Hence adding a workaround to remove the target 0xf
229 * defined for memory space from Inbound window attributes.
230 */
231 piwar &= ~PIWAR_TGI_LOCAL;
232 }
233
234 if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
235 if (in_be32(&pci->block_rev1) >= PCIE_IP_REV_2_2) {
236 win_idx = 2;
237 start_idx = 0;
238 end_idx = 3;
239 }
240 }
241
242 /* Disable all windows (except powar0 since it's ignored) */
243 for(i = 1; i < 5; i++)
244 out_be32(&pci->pow[i].powar, 0);
245
246 if (setup_inbound) {
247 for (i = start_idx; i < end_idx; i++)
248 out_be32(&pci->piw[i].piwar, 0);
249 }
250
251 /* Setup outbound MEM window */
252 for(i = 0, j = 1; i < 3; i++) {
253 if (!(hose->mem_resources[i].flags & IORESOURCE_MEM))
254 continue;
255
256 paddr_lo = min(paddr_lo, (u64)hose->mem_resources[i].start);
257 paddr_hi = max(paddr_hi, (u64)hose->mem_resources[i].end);
258
259 /* We assume all memory resources have the same offset */
260 offset = hose->mem_offset[i];
261 n = setup_one_atmu(pci, j, &hose->mem_resources[i], offset);
262
263 if (n < 0 || j >= 5) {
264 pr_err("Ran out of outbound PCI ATMUs for resource %d!\n", i);
265 hose->mem_resources[i].flags |= IORESOURCE_DISABLED;
266 } else
267 j += n;
268 }
269
270 /* Setup outbound IO window */
271 if (hose->io_resource.flags & IORESOURCE_IO) {
272 if (j >= 5) {
273 pr_err("Ran out of outbound PCI ATMUs for IO resource\n");
274 } else {
275 pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, "
276 "phy base 0x%016llx.\n",
277 (u64)hose->io_resource.start,
278 (u64)resource_size(&hose->io_resource),
279 (u64)hose->io_base_phys);
280 out_be32(&pci->pow[j].potar, (hose->io_resource.start >> 12));
281 out_be32(&pci->pow[j].potear, 0);
282 out_be32(&pci->pow[j].powbar, (hose->io_base_phys >> 12));
283 /* Enable, IO R/W */
284 out_be32(&pci->pow[j].powar, 0x80088000
285 | (ilog2(hose->io_resource.end
286 - hose->io_resource.start + 1) - 1));
287 }
288 }
289
290 /* convert to pci address space */
291 paddr_hi -= offset;
292 paddr_lo -= offset;
293
294 if (paddr_hi == paddr_lo) {
295 pr_err("%pOF: No outbound window space\n", hose->dn);
296 return;
297 }
298
299 if (paddr_lo == 0) {
300 pr_err("%pOF: No space for inbound window\n", hose->dn);
301 return;
302 }
303
304 /* setup PCSRBAR/PEXCSRBAR */
305 early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, 0xffffffff);
306 early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, &pcicsrbar_sz);
307 pcicsrbar_sz = ~pcicsrbar_sz + 1;
308
309 if (paddr_hi < (0x100000000ull - pcicsrbar_sz) ||
310 (paddr_lo > 0x100000000ull))
311 pcicsrbar = 0x100000000ull - pcicsrbar_sz;
312 else
313 pcicsrbar = (paddr_lo - pcicsrbar_sz) & -pcicsrbar_sz;
314 early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, pcicsrbar);
315
316 paddr_lo = min(paddr_lo, (u64)pcicsrbar);
317
318 pr_info("%pOF: PCICSRBAR @ 0x%x\n", hose->dn, pcicsrbar);
319
320 /* Setup inbound mem window */
321 mem = memblock_end_of_DRAM();
322 pr_info("%s: end of DRAM %llx\n", __func__, mem);
323
324 /*
325 * The msi-address-64 property, if it exists, indicates the physical
326 * address of the MSIIR register. Normally, this register is located
327 * inside CCSR, so the ATMU that covers all of CCSR is used. But if
328 * this property exists, then we normally need to create a new ATMU
329 * for it. For now, however, we cheat. The only entity that creates
330 * this property is the Freescale hypervisor, and the address is
331 * specified in the partition configuration. Typically, the address
332 * is located in the page immediately after the end of DDR. If so, we
333 * can avoid allocating a new ATMU by extending the DDR ATMU by one
334 * page.
335 */
336 reg = of_get_property(hose->dn, "msi-address-64", &len);
337 if (reg && (len == sizeof(u64))) {
338 u64 address = be64_to_cpup(reg);
339
340 if ((address >= mem) && (address < (mem + PAGE_SIZE))) {
341 pr_info("%pOF: extending DDR ATMU to cover MSIIR", hose->dn);
342 mem += PAGE_SIZE;
343 } else {
344 /* TODO: Create a new ATMU for MSIIR */
345 pr_warn("%pOF: msi-address-64 address of %llx is "
346 "unsupported\n", hose->dn, address);
347 }
348 }
349
350 sz = min(mem, paddr_lo);
351 mem_log = ilog2(sz);
352
353 /* PCIe can overmap inbound & outbound since RX & TX are separated */
354 if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
355 /* Size window to exact size if power-of-two or one size up */
356 if ((1ull << mem_log) != mem) {
357 mem_log++;
358 if ((1ull << mem_log) > mem)
359 pr_info("%pOF: Setting PCI inbound window "
360 "greater than memory size\n", hose->dn);
361 }
362
363 piwar |= ((mem_log - 1) & PIWAR_SZ_MASK);
364
365 if (setup_inbound) {
366 /* Setup inbound memory window */
367 out_be32(&pci->piw[win_idx].pitar, 0x00000000);
368 out_be32(&pci->piw[win_idx].piwbar, 0x00000000);
369 out_be32(&pci->piw[win_idx].piwar, piwar);
370 }
371
372 win_idx--;
373 hose->dma_window_base_cur = 0x00000000;
374 hose->dma_window_size = (resource_size_t)sz;
375
376 /*
377 * if we have >4G of memory setup second PCI inbound window to
378 * let devices that are 64-bit address capable to work w/o
379 * SWIOTLB and access the full range of memory
380 */
381 if (sz != mem) {
382 mem_log = ilog2(mem);
383
384 /* Size window up if we dont fit in exact power-of-2 */
385 if ((1ull << mem_log) != mem)
386 mem_log++;
387
388 piwar = (piwar & ~PIWAR_SZ_MASK) | (mem_log - 1);
389 pci64_dma_offset = 1ULL << mem_log;
390
391 if (setup_inbound) {
392 /* Setup inbound memory window */
393 out_be32(&pci->piw[win_idx].pitar, 0x00000000);
394 out_be32(&pci->piw[win_idx].piwbear,
395 pci64_dma_offset >> 44);
396 out_be32(&pci->piw[win_idx].piwbar,
397 pci64_dma_offset >> 12);
398 out_be32(&pci->piw[win_idx].piwar, piwar);
399 }
400
401 /*
402 * install our own dma_set_mask handler to fixup dma_ops
403 * and dma_offset
404 */
405 ppc_md.dma_set_mask = fsl_pci_dma_set_mask;
406
407 pr_info("%pOF: Setup 64-bit PCI DMA window\n", hose->dn);
408 }
409 } else {
410 u64 paddr = 0;
411
412 if (setup_inbound) {
413 /* Setup inbound memory window */
414 out_be32(&pci->piw[win_idx].pitar, paddr >> 12);
415 out_be32(&pci->piw[win_idx].piwbar, paddr >> 12);
416 out_be32(&pci->piw[win_idx].piwar,
417 (piwar | (mem_log - 1)));
418 }
419
420 win_idx--;
421 paddr += 1ull << mem_log;
422 sz -= 1ull << mem_log;
423
424 if (sz) {
425 mem_log = ilog2(sz);
426 piwar |= (mem_log - 1);
427
428 if (setup_inbound) {
429 out_be32(&pci->piw[win_idx].pitar,
430 paddr >> 12);
431 out_be32(&pci->piw[win_idx].piwbar,
432 paddr >> 12);
433 out_be32(&pci->piw[win_idx].piwar, piwar);
434 }
435
436 win_idx--;
437 paddr += 1ull << mem_log;
438 }
439
440 hose->dma_window_base_cur = 0x00000000;
441 hose->dma_window_size = (resource_size_t)paddr;
442 }
443
444 if (hose->dma_window_size < mem) {
445#ifdef CONFIG_SWIOTLB
446 ppc_swiotlb_enable = 1;
447#else
448 pr_err("%pOF: ERROR: Memory size exceeds PCI ATMU ability to "
449 "map - enable CONFIG_SWIOTLB to avoid dma errors.\n",
450 hose->dn);
451#endif
452 /* adjusting outbound windows could reclaim space in mem map */
453 if (paddr_hi < 0xffffffffull)
454 pr_warn("%pOF: WARNING: Outbound window cfg leaves "
455 "gaps in memory map. Adjusting the memory map "
456 "could reduce unnecessary bounce buffering.\n",
457 hose->dn);
458
459 pr_info("%pOF: DMA window size is 0x%llx\n", hose->dn,
460 (u64)hose->dma_window_size);
461 }
462}
463
464static void setup_pci_cmd(struct pci_controller *hose)
465{
466 u16 cmd;
467 int cap_x;
468
469 early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd);
470 cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
471 | PCI_COMMAND_IO;
472 early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd);
473
474 cap_x = early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX);
475 if (cap_x) {
476 int pci_x_cmd = cap_x + PCI_X_CMD;
477 cmd = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
478 | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
479 early_write_config_word(hose, 0, 0, pci_x_cmd, cmd);
480 } else {
481 early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
482 }
483}
484
485void fsl_pcibios_fixup_bus(struct pci_bus *bus)
486{
487 struct pci_controller *hose = pci_bus_to_host(bus);
488 int i, is_pcie = 0, no_link;
489
490 /* The root complex bridge comes up with bogus resources,
491 * we copy the PHB ones in.
492 *
493 * With the current generic PCI code, the PHB bus no longer
494 * has bus->resource[0..4] set, so things are a bit more
495 * tricky.
496 */
497
498 if (fsl_pcie_bus_fixup)
499 is_pcie = early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP);
500 no_link = !!(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK);
501
502 if (bus->parent == hose->bus && (is_pcie || no_link)) {
503 for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; ++i) {
504 struct resource *res = bus->resource[i];
505 struct resource *par;
506
507 if (!res)
508 continue;
509 if (i == 0)
510 par = &hose->io_resource;
511 else if (i < 4)
512 par = &hose->mem_resources[i-1];
513 else par = NULL;
514
515 res->start = par ? par->start : 0;
516 res->end = par ? par->end : 0;
517 res->flags = par ? par->flags : 0;
518 }
519 }
520}
521
522static int fsl_add_bridge(struct platform_device *pdev, int is_primary)
523{
524 int len;
525 struct pci_controller *hose;
526 struct resource rsrc;
527 const int *bus_range;
528 u8 hdr_type, progif;
529 u32 class_code;
530 struct device_node *dev;
531 struct ccsr_pci __iomem *pci;
532 u16 temp;
533 u32 svr = mfspr(SPRN_SVR);
534
535 dev = pdev->dev.of_node;
536
537 if (!of_device_is_available(dev)) {
538 pr_warn("%pOF: disabled\n", dev);
539 return -ENODEV;
540 }
541
542 pr_debug("Adding PCI host bridge %pOF\n", dev);
543
544 /* Fetch host bridge registers address */
545 if (of_address_to_resource(dev, 0, &rsrc)) {
546 printk(KERN_WARNING "Can't get pci register base!");
547 return -ENOMEM;
548 }
549
550 /* Get bus range if any */
551 bus_range = of_get_property(dev, "bus-range", &len);
552 if (bus_range == NULL || len < 2 * sizeof(int))
553 printk(KERN_WARNING "Can't get bus-range for %pOF, assume"
554 " bus 0\n", dev);
555
556 pci_add_flags(PCI_REASSIGN_ALL_BUS);
557 hose = pcibios_alloc_controller(dev);
558 if (!hose)
559 return -ENOMEM;
560
561 /* set platform device as the parent */
562 hose->parent = &pdev->dev;
563 hose->first_busno = bus_range ? bus_range[0] : 0x0;
564 hose->last_busno = bus_range ? bus_range[1] : 0xff;
565
566 pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
567 (u64)rsrc.start, (u64)resource_size(&rsrc));
568
569 pci = hose->private_data = ioremap(rsrc.start, resource_size(&rsrc));
570 if (!hose->private_data)
571 goto no_bridge;
572
573 setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
574 PPC_INDIRECT_TYPE_BIG_ENDIAN);
575
576 if (in_be32(&pci->block_rev1) < PCIE_IP_REV_3_0)
577 hose->indirect_type |= PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK;
578
579 if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
580 /* use fsl_indirect_read_config for PCIe */
581 hose->ops = &fsl_indirect_pcie_ops;
582 /* For PCIE read HEADER_TYPE to identify controller mode */
583 early_read_config_byte(hose, 0, 0, PCI_HEADER_TYPE, &hdr_type);
584 if ((hdr_type & PCI_HEADER_TYPE_MASK) != PCI_HEADER_TYPE_BRIDGE)
585 goto no_bridge;
586
587 } else {
588 /* For PCI read PROG to identify controller mode */
589 early_read_config_byte(hose, 0, 0, PCI_CLASS_PROG, &progif);
590 if ((progif & 1) &&
591 !of_property_read_bool(dev, "fsl,pci-agent-force-enum"))
592 goto no_bridge;
593 }
594
595 setup_pci_cmd(hose);
596
597 /* check PCI express link status */
598 if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
599 hose->indirect_type |= PPC_INDIRECT_TYPE_EXT_REG |
600 PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS;
601 if (fsl_pcie_check_link(hose))
602 hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
603 /* Fix Class Code to PCI_CLASS_BRIDGE_PCI_NORMAL for pre-3.0 controller */
604 if (in_be32(&pci->block_rev1) < PCIE_IP_REV_3_0) {
605 early_read_config_dword(hose, 0, 0, PCIE_FSL_CSR_CLASSCODE, &class_code);
606 class_code &= 0xff;
607 class_code |= PCI_CLASS_BRIDGE_PCI_NORMAL << 8;
608 early_write_config_dword(hose, 0, 0, PCIE_FSL_CSR_CLASSCODE, class_code);
609 }
610 } else {
611 /*
612 * Set PBFR(PCI Bus Function Register)[10] = 1 to
613 * disable the combining of crossing cacheline
614 * boundary requests into one burst transaction.
615 * PCI-X operation is not affected.
616 * Fix erratum PCI 5 on MPC8548
617 */
618#define PCI_BUS_FUNCTION 0x44
619#define PCI_BUS_FUNCTION_MDS 0x400 /* Master disable streaming */
620 if (((SVR_SOC_VER(svr) == SVR_8543) ||
621 (SVR_SOC_VER(svr) == SVR_8545) ||
622 (SVR_SOC_VER(svr) == SVR_8547) ||
623 (SVR_SOC_VER(svr) == SVR_8548)) &&
624 !early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX)) {
625 early_read_config_word(hose, 0, 0,
626 PCI_BUS_FUNCTION, &temp);
627 temp |= PCI_BUS_FUNCTION_MDS;
628 early_write_config_word(hose, 0, 0,
629 PCI_BUS_FUNCTION, temp);
630 }
631 }
632
633 printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
634 "Firmware bus number: %d->%d\n",
635 (unsigned long long)rsrc.start, hose->first_busno,
636 hose->last_busno);
637
638 pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
639 hose, hose->cfg_addr, hose->cfg_data);
640
641 /* Interpret the "ranges" property */
642 /* This also maps the I/O region and sets isa_io/mem_base */
643 pci_process_bridge_OF_ranges(hose, dev, is_primary);
644
645 /* Setup PEX window registers */
646 setup_pci_atmu(hose);
647
648 /* Set up controller operations */
649 setup_swiotlb_ops(hose);
650
651 return 0;
652
653no_bridge:
654 iounmap(hose->private_data);
655 /* unmap cfg_data & cfg_addr separately if not on same page */
656 if (((unsigned long)hose->cfg_data & PAGE_MASK) !=
657 ((unsigned long)hose->cfg_addr & PAGE_MASK))
658 iounmap(hose->cfg_data);
659 iounmap(hose->cfg_addr);
660 pcibios_free_controller(hose);
661 return -ENODEV;
662}
663#endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */
664
665DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID,
666 quirk_fsl_pcie_early);
667
668#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
669struct mpc83xx_pcie_priv {
670 void __iomem *cfg_type0;
671 void __iomem *cfg_type1;
672 u32 dev_base;
673};
674
675struct pex_inbound_window {
676 u32 ar;
677 u32 tar;
678 u32 barl;
679 u32 barh;
680};
681
682/*
683 * With the convention of u-boot, the PCIE outbound window 0 serves
684 * as configuration transactions outbound.
685 */
686#define PEX_OUTWIN0_BAR 0xCA4
687#define PEX_OUTWIN0_TAL 0xCA8
688#define PEX_OUTWIN0_TAH 0xCAC
689#define PEX_RC_INWIN_BASE 0xE60
690#define PEX_RCIWARn_EN 0x1
691
692static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn)
693{
694 struct pci_controller *hose = pci_bus_to_host(bus);
695
696 if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)
697 return PCIBIOS_DEVICE_NOT_FOUND;
698 /*
699 * Workaround for the HW bug: for Type 0 configure transactions the
700 * PCI-E controller does not check the device number bits and just
701 * assumes that the device number bits are 0.
702 */
703 if (bus->number == hose->first_busno ||
704 bus->primary == hose->first_busno) {
705 if (devfn & 0xf8)
706 return PCIBIOS_DEVICE_NOT_FOUND;
707 }
708
709 if (ppc_md.pci_exclude_device) {
710 if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
711 return PCIBIOS_DEVICE_NOT_FOUND;
712 }
713
714 return PCIBIOS_SUCCESSFUL;
715}
716
717static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus,
718 unsigned int devfn, int offset)
719{
720 struct pci_controller *hose = pci_bus_to_host(bus);
721 struct mpc83xx_pcie_priv *pcie = hose->dn->data;
722 u32 dev_base = bus->number << 24 | devfn << 16;
723 int ret;
724
725 ret = mpc83xx_pcie_exclude_device(bus, devfn);
726 if (ret)
727 return NULL;
728
729 offset &= 0xfff;
730
731 /* Type 0 */
732 if (bus->number == hose->first_busno)
733 return pcie->cfg_type0 + offset;
734
735 if (pcie->dev_base == dev_base)
736 goto mapped;
737
738 out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, dev_base);
739
740 pcie->dev_base = dev_base;
741mapped:
742 return pcie->cfg_type1 + offset;
743}
744
745static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
746 int offset, int len, u32 val)
747{
748 struct pci_controller *hose = pci_bus_to_host(bus);
749
750 /* PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS */
751 if (offset == PCI_PRIMARY_BUS && bus->number == hose->first_busno)
752 val &= 0xffffff00;
753
754 return pci_generic_config_write(bus, devfn, offset, len, val);
755}
756
757static struct pci_ops mpc83xx_pcie_ops = {
758 .map_bus = mpc83xx_pcie_remap_cfg,
759 .read = pci_generic_config_read,
760 .write = mpc83xx_pcie_write_config,
761};
762
763static int __init mpc83xx_pcie_setup(struct pci_controller *hose,
764 struct resource *reg)
765{
766 struct mpc83xx_pcie_priv *pcie;
767 u32 cfg_bar;
768 int ret = -ENOMEM;
769
770 pcie = kzalloc_obj(*pcie);
771 if (!pcie)
772 return ret;
773
774 pcie->cfg_type0 = ioremap(reg->start, resource_size(reg));
775 if (!pcie->cfg_type0)
776 goto err0;
777
778 cfg_bar = in_le32(pcie->cfg_type0 + PEX_OUTWIN0_BAR);
779 if (!cfg_bar) {
780 /* PCI-E isn't configured. */
781 ret = -ENODEV;
782 goto err1;
783 }
784
785 pcie->cfg_type1 = ioremap(cfg_bar, 0x1000);
786 if (!pcie->cfg_type1)
787 goto err1;
788
789 WARN_ON(hose->dn->data);
790 hose->dn->data = pcie;
791 hose->ops = &mpc83xx_pcie_ops;
792 hose->indirect_type |= PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK;
793
794 out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAH, 0);
795 out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, 0);
796
797 if (fsl_pcie_check_link(hose))
798 hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
799
800 return 0;
801err1:
802 iounmap(pcie->cfg_type0);
803err0:
804 kfree(pcie);
805 return ret;
806
807}
808
809int __init mpc83xx_add_bridge(struct device_node *dev)
810{
811 int ret;
812 int len;
813 struct pci_controller *hose;
814 struct resource rsrc_reg;
815 struct resource rsrc_cfg;
816 const int *bus_range;
817 int primary;
818
819 is_mpc83xx_pci = 1;
820
821 if (!of_device_is_available(dev)) {
822 pr_warn("%pOF: disabled by the firmware.\n",
823 dev);
824 return -ENODEV;
825 }
826 pr_debug("Adding PCI host bridge %pOF\n", dev);
827
828 /* Fetch host bridge registers address */
829 if (of_address_to_resource(dev, 0, &rsrc_reg)) {
830 printk(KERN_WARNING "Can't get pci register base!\n");
831 return -ENOMEM;
832 }
833
834 memset(&rsrc_cfg, 0, sizeof(rsrc_cfg));
835
836 if (of_address_to_resource(dev, 1, &rsrc_cfg)) {
837 printk(KERN_WARNING
838 "No pci config register base in dev tree, "
839 "using default\n");
840 /*
841 * MPC83xx supports up to two host controllers
842 * one at 0x8500 has config space registers at 0x8300
843 * one at 0x8600 has config space registers at 0x8380
844 */
845 if ((rsrc_reg.start & 0xfffff) == 0x8500)
846 rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8300;
847 else if ((rsrc_reg.start & 0xfffff) == 0x8600)
848 rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8380;
849 }
850 /*
851 * Controller at offset 0x8500 is primary
852 */
853 if ((rsrc_reg.start & 0xfffff) == 0x8500)
854 primary = 1;
855 else
856 primary = 0;
857
858 /* Get bus range if any */
859 bus_range = of_get_property(dev, "bus-range", &len);
860 if (bus_range == NULL || len < 2 * sizeof(int)) {
861 printk(KERN_WARNING "Can't get bus-range for %pOF, assume"
862 " bus 0\n", dev);
863 }
864
865 pci_add_flags(PCI_REASSIGN_ALL_BUS);
866 hose = pcibios_alloc_controller(dev);
867 if (!hose)
868 return -ENOMEM;
869
870 hose->first_busno = bus_range ? bus_range[0] : 0;
871 hose->last_busno = bus_range ? bus_range[1] : 0xff;
872
873 if (of_device_is_compatible(dev, "fsl,mpc8314-pcie")) {
874 ret = mpc83xx_pcie_setup(hose, &rsrc_reg);
875 if (ret)
876 goto err0;
877 } else {
878 setup_indirect_pci(hose, rsrc_cfg.start,
879 rsrc_cfg.start + 4, 0);
880 }
881
882 printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
883 "Firmware bus number: %d->%d\n",
884 (unsigned long long)rsrc_reg.start, hose->first_busno,
885 hose->last_busno);
886
887 pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
888 hose, hose->cfg_addr, hose->cfg_data);
889
890 /* Interpret the "ranges" property */
891 /* This also maps the I/O region and sets isa_io/mem_base */
892 pci_process_bridge_OF_ranges(hose, dev, primary);
893
894 return 0;
895err0:
896 pcibios_free_controller(hose);
897 return ret;
898}
899#endif /* CONFIG_PPC_83xx */
900
901u64 fsl_pci_immrbar_base(struct pci_controller *hose)
902{
903#ifdef CONFIG_PPC_83xx
904 if (is_mpc83xx_pci) {
905 struct mpc83xx_pcie_priv *pcie = hose->dn->data;
906 struct pex_inbound_window *in;
907 int i;
908
909 /* Walk the Root Complex Inbound windows to match IMMR base */
910 in = pcie->cfg_type0 + PEX_RC_INWIN_BASE;
911 for (i = 0; i < 4; i++) {
912 /* not enabled, skip */
913 if (!(in_le32(&in[i].ar) & PEX_RCIWARn_EN))
914 continue;
915
916 if (get_immrbase() == in_le32(&in[i].tar))
917 return (u64)in_le32(&in[i].barh) << 32 |
918 in_le32(&in[i].barl);
919 }
920
921 printk(KERN_WARNING "could not find PCI BAR matching IMMR\n");
922 }
923#endif
924
925#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
926 if (!is_mpc83xx_pci) {
927 u32 base;
928
929 pci_bus_read_config_dword(hose->bus,
930 PCI_DEVFN(0, 0), PCI_BASE_ADDRESS_0, &base);
931
932 /*
933 * For PEXCSRBAR, bit 3-0 indicate prefetchable and
934 * address type. So when getting base address, these
935 * bits should be masked
936 */
937 base &= PCI_BASE_ADDRESS_MEM_MASK;
938
939 return base;
940 }
941#endif
942
943 return 0;
944}
945
946#ifdef CONFIG_PPC_E500
947static int mcheck_handle_load(struct pt_regs *regs, u32 inst)
948{
949 unsigned int rd, ra, rb, d;
950
951 rd = get_rt(inst);
952 ra = get_ra(inst);
953 rb = get_rb(inst);
954 d = get_d(inst);
955
956 switch (get_op(inst)) {
957 case 31:
958 switch (get_xop(inst)) {
959 case OP_31_XOP_LWZX:
960 case OP_31_XOP_LWBRX:
961 regs->gpr[rd] = 0xffffffff;
962 break;
963
964 case OP_31_XOP_LWZUX:
965 regs->gpr[rd] = 0xffffffff;
966 regs->gpr[ra] += regs->gpr[rb];
967 break;
968
969 case OP_31_XOP_LBZX:
970 regs->gpr[rd] = 0xff;
971 break;
972
973 case OP_31_XOP_LBZUX:
974 regs->gpr[rd] = 0xff;
975 regs->gpr[ra] += regs->gpr[rb];
976 break;
977
978 case OP_31_XOP_LHZX:
979 case OP_31_XOP_LHBRX:
980 regs->gpr[rd] = 0xffff;
981 break;
982
983 case OP_31_XOP_LHZUX:
984 regs->gpr[rd] = 0xffff;
985 regs->gpr[ra] += regs->gpr[rb];
986 break;
987
988 case OP_31_XOP_LHAX:
989 regs->gpr[rd] = ~0UL;
990 break;
991
992 case OP_31_XOP_LHAUX:
993 regs->gpr[rd] = ~0UL;
994 regs->gpr[ra] += regs->gpr[rb];
995 break;
996
997 default:
998 return 0;
999 }
1000 break;
1001
1002 case OP_LWZ:
1003 regs->gpr[rd] = 0xffffffff;
1004 break;
1005
1006 case OP_LWZU:
1007 regs->gpr[rd] = 0xffffffff;
1008 regs->gpr[ra] += (s16)d;
1009 break;
1010
1011 case OP_LBZ:
1012 regs->gpr[rd] = 0xff;
1013 break;
1014
1015 case OP_LBZU:
1016 regs->gpr[rd] = 0xff;
1017 regs->gpr[ra] += (s16)d;
1018 break;
1019
1020 case OP_LHZ:
1021 regs->gpr[rd] = 0xffff;
1022 break;
1023
1024 case OP_LHZU:
1025 regs->gpr[rd] = 0xffff;
1026 regs->gpr[ra] += (s16)d;
1027 break;
1028
1029 case OP_LHA:
1030 regs->gpr[rd] = ~0UL;
1031 break;
1032
1033 case OP_LHAU:
1034 regs->gpr[rd] = ~0UL;
1035 regs->gpr[ra] += (s16)d;
1036 break;
1037
1038 default:
1039 return 0;
1040 }
1041
1042 return 1;
1043}
1044
1045static int is_in_pci_mem_space(phys_addr_t addr)
1046{
1047 struct pci_controller *hose;
1048 struct resource *res;
1049 int i;
1050
1051 list_for_each_entry(hose, &hose_list, list_node) {
1052 if (!(hose->indirect_type & PPC_INDIRECT_TYPE_EXT_REG))
1053 continue;
1054
1055 for (i = 0; i < 3; i++) {
1056 res = &hose->mem_resources[i];
1057 if ((res->flags & IORESOURCE_MEM) &&
1058 addr >= res->start && addr <= res->end)
1059 return 1;
1060 }
1061 }
1062 return 0;
1063}
1064
1065int fsl_pci_mcheck_exception(struct pt_regs *regs)
1066{
1067 u32 inst;
1068 int ret;
1069 phys_addr_t addr = 0;
1070
1071 /* Let KVM/QEMU deal with the exception */
1072 if (regs->msr & MSR_GS)
1073 return 0;
1074
1075#ifdef CONFIG_PHYS_64BIT
1076 addr = mfspr(SPRN_MCARU);
1077 addr <<= 32;
1078#endif
1079 addr += mfspr(SPRN_MCAR);
1080
1081 if (is_in_pci_mem_space(addr)) {
1082 if (user_mode(regs))
1083 ret = copy_from_user_nofault(&inst,
1084 (void __user *)regs->nip, sizeof(inst));
1085 else
1086 ret = get_kernel_nofault(inst, (void *)regs->nip);
1087
1088 if (!ret && mcheck_handle_load(regs, inst)) {
1089 regs_add_return_ip(regs, 4);
1090 return 1;
1091 }
1092 }
1093
1094 return 0;
1095}
1096#endif
1097
1098#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
1099static const struct of_device_id pci_ids[] = {
1100 { .compatible = "fsl,mpc8540-pci", },
1101 { .compatible = "fsl,mpc8548-pcie", },
1102 { .compatible = "fsl,mpc8610-pci", },
1103 { .compatible = "fsl,mpc8641-pcie", },
1104 { .compatible = "fsl,qoriq-pcie", },
1105 { .compatible = "fsl,qoriq-pcie-v2.1", },
1106 { .compatible = "fsl,qoriq-pcie-v2.2", },
1107 { .compatible = "fsl,qoriq-pcie-v2.3", },
1108 { .compatible = "fsl,qoriq-pcie-v2.4", },
1109 { .compatible = "fsl,qoriq-pcie-v3.0", },
1110
1111 /*
1112 * The following entries are for compatibility with older device
1113 * trees.
1114 */
1115 { .compatible = "fsl,p1022-pcie", },
1116 { .compatible = "fsl,p4080-pcie", },
1117
1118 {},
1119};
1120
1121struct device_node *fsl_pci_primary;
1122
1123void __init fsl_pci_assign_primary(void)
1124{
1125 struct device_node *np;
1126
1127 /* Callers can specify the primary bus using other means. */
1128 if (fsl_pci_primary)
1129 return;
1130
1131 /* If a PCI host bridge contains an ISA node, it's primary. */
1132 np = of_find_node_by_type(NULL, "isa");
1133 while ((fsl_pci_primary = of_get_parent(np))) {
1134 of_node_put(np);
1135 np = fsl_pci_primary;
1136
1137 if (of_match_node(pci_ids, np) && of_device_is_available(np))
1138 return;
1139 }
1140
1141 /*
1142 * If there's no PCI host bridge with ISA then check for
1143 * PCI host bridge with alias "pci0" (first PCI host bridge).
1144 */
1145 np = of_find_node_by_path("pci0");
1146 if (np && of_match_node(pci_ids, np) && of_device_is_available(np)) {
1147 fsl_pci_primary = np;
1148 of_node_put(np);
1149 return;
1150 }
1151 if (np)
1152 of_node_put(np);
1153
1154 /*
1155 * If there's no PCI host bridge with ISA, arbitrarily
1156 * designate one as primary. This can go away once
1157 * various bugs with primary-less systems are fixed.
1158 */
1159 for_each_matching_node(np, pci_ids) {
1160 if (of_device_is_available(np)) {
1161 fsl_pci_primary = np;
1162 return;
1163 }
1164 }
1165}
1166
1167#ifdef CONFIG_PM_SLEEP
1168static irqreturn_t fsl_pci_pme_handle(int irq, void *dev_id)
1169{
1170 struct pci_controller *hose = dev_id;
1171 struct ccsr_pci __iomem *pci = hose->private_data;
1172 u32 dr;
1173
1174 dr = in_be32(&pci->pex_pme_mes_dr);
1175 if (!dr)
1176 return IRQ_NONE;
1177
1178 out_be32(&pci->pex_pme_mes_dr, dr);
1179
1180 return IRQ_HANDLED;
1181}
1182
1183static int fsl_pci_pme_probe(struct pci_controller *hose)
1184{
1185 struct ccsr_pci __iomem *pci;
1186 struct pci_dev *dev;
1187 int pme_irq;
1188 int res;
1189 u16 pms;
1190
1191 /* Get hose's pci_dev */
1192 dev = list_first_entry(&hose->bus->devices, typeof(*dev), bus_list);
1193
1194 /* PME Disable */
1195 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pms);
1196 pms &= ~PCI_PM_CTRL_PME_ENABLE;
1197 pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pms);
1198
1199 pme_irq = irq_of_parse_and_map(hose->dn, 0);
1200 if (!pme_irq) {
1201 dev_err(&dev->dev, "Failed to map PME interrupt.\n");
1202
1203 return -ENXIO;
1204 }
1205
1206 res = devm_request_irq(hose->parent, pme_irq,
1207 fsl_pci_pme_handle,
1208 IRQF_SHARED,
1209 "[PCI] PME", hose);
1210 if (res < 0) {
1211 dev_err(&dev->dev, "Unable to request irq %d for PME\n", pme_irq);
1212 irq_dispose_mapping(pme_irq);
1213
1214 return -ENODEV;
1215 }
1216
1217 pci = hose->private_data;
1218
1219 /* Enable PTOD, ENL23D & EXL23D */
1220 clrbits32(&pci->pex_pme_mes_disr,
1221 PME_DISR_EN_PTOD | PME_DISR_EN_ENL23D | PME_DISR_EN_EXL23D);
1222
1223 out_be32(&pci->pex_pme_mes_ier, 0);
1224 setbits32(&pci->pex_pme_mes_ier,
1225 PME_DISR_EN_PTOD | PME_DISR_EN_ENL23D | PME_DISR_EN_EXL23D);
1226
1227 /* PME Enable */
1228 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pms);
1229 pms |= PCI_PM_CTRL_PME_ENABLE;
1230 pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pms);
1231
1232 return 0;
1233}
1234
1235static void send_pme_turnoff_message(struct pci_controller *hose)
1236{
1237 struct ccsr_pci __iomem *pci = hose->private_data;
1238 u32 dr;
1239 int i;
1240
1241 /* Send PME_Turn_Off Message Request */
1242 setbits32(&pci->pex_pmcr, PEX_PMCR_PTOMR);
1243
1244 /* Wait trun off done */
1245 for (i = 0; i < 150; i++) {
1246 dr = in_be32(&pci->pex_pme_mes_dr);
1247 if (dr) {
1248 out_be32(&pci->pex_pme_mes_dr, dr);
1249 break;
1250 }
1251
1252 udelay(1000);
1253 }
1254}
1255
1256static void fsl_pci_syscore_do_suspend(struct pci_controller *hose)
1257{
1258 send_pme_turnoff_message(hose);
1259}
1260
1261static int fsl_pci_syscore_suspend(void *data)
1262{
1263 struct pci_controller *hose, *tmp;
1264
1265 list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
1266 fsl_pci_syscore_do_suspend(hose);
1267
1268 return 0;
1269}
1270
1271static void fsl_pci_syscore_do_resume(struct pci_controller *hose)
1272{
1273 struct ccsr_pci __iomem *pci = hose->private_data;
1274 u32 dr;
1275 int i;
1276
1277 /* Send Exit L2 State Message */
1278 setbits32(&pci->pex_pmcr, PEX_PMCR_EXL2S);
1279
1280 /* Wait exit done */
1281 for (i = 0; i < 150; i++) {
1282 dr = in_be32(&pci->pex_pme_mes_dr);
1283 if (dr) {
1284 out_be32(&pci->pex_pme_mes_dr, dr);
1285 break;
1286 }
1287
1288 udelay(1000);
1289 }
1290
1291 setup_pci_atmu(hose);
1292}
1293
1294static void fsl_pci_syscore_resume(void *data)
1295{
1296 struct pci_controller *hose, *tmp;
1297
1298 list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
1299 fsl_pci_syscore_do_resume(hose);
1300}
1301
1302static const struct syscore_ops pci_syscore_pm_ops = {
1303 .suspend = fsl_pci_syscore_suspend,
1304 .resume = fsl_pci_syscore_resume,
1305};
1306
1307static struct syscore pci_syscore_pm = {
1308 .ops = &pci_syscore_pm_ops,
1309};
1310#endif
1311
1312void fsl_pcibios_fixup_phb(struct pci_controller *phb)
1313{
1314#ifdef CONFIG_PM_SLEEP
1315 fsl_pci_pme_probe(phb);
1316#endif
1317}
1318
1319static int add_err_dev(struct platform_device *pdev)
1320{
1321 struct platform_device *errdev;
1322 struct mpc85xx_edac_pci_plat_data pd = {
1323 .of_node = pdev->dev.of_node
1324 };
1325
1326 errdev = platform_device_register_resndata(&pdev->dev,
1327 "mpc85xx-pci-edac",
1328 PLATFORM_DEVID_AUTO,
1329 pdev->resource,
1330 pdev->num_resources,
1331 &pd, sizeof(pd));
1332
1333 return PTR_ERR_OR_ZERO(errdev);
1334}
1335
1336static int fsl_pci_probe(struct platform_device *pdev)
1337{
1338 struct device_node *node;
1339 int ret;
1340
1341 node = pdev->dev.of_node;
1342 ret = fsl_add_bridge(pdev, fsl_pci_primary == node);
1343 if (ret)
1344 return ret;
1345
1346 ret = add_err_dev(pdev);
1347 if (ret)
1348 dev_err(&pdev->dev, "couldn't register error device: %d\n",
1349 ret);
1350
1351 return 0;
1352}
1353
1354static struct platform_driver fsl_pci_driver = {
1355 .driver = {
1356 .name = "fsl-pci",
1357 .of_match_table = pci_ids,
1358 },
1359 .probe = fsl_pci_probe,
1360 .driver_managed_dma = true,
1361};
1362
1363static int __init fsl_pci_init(void)
1364{
1365#ifdef CONFIG_PM_SLEEP
1366 register_syscore(&pci_syscore_pm);
1367#endif
1368 return platform_driver_register(&fsl_pci_driver);
1369}
1370arch_initcall(fsl_pci_init);
1371#endif