projects/linux·blob master · refs

461 lines · 11.9 KiB

1// SPDX-License-Identifier: GPL-2.0
2#include <linux/bitops.h>
3#include <linux/delay.h>
4#include <linux/isa-dma.h>
5#include <linux/pci.h>
6#include <asm/dma.h>
7#include <linux/io.h>
8#include <asm/processor-cyrix.h>
9#include <asm/processor-flags.h>
10#include <linux/timer.h>
11#include <asm/pci-direct.h>
12#include <asm/tsc.h>
13#include <asm/cpufeature.h>
14#include <linux/sched.h>
15#include <linux/sched/clock.h>
16
17#include "cpu.h"
18
19/*
20 * Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
21 */
22static void __do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
23{
24 unsigned char ccr2, ccr3;
25
26 /* we test for DEVID by checking whether CCR3 is writable */
27 ccr3 = getCx86(CX86_CCR3);
28 setCx86(CX86_CCR3, ccr3 ^ 0x80);
29 getCx86(0xc0); /* dummy to change bus */
30
31 if (getCx86(CX86_CCR3) == ccr3) { /* no DEVID regs. */
32 ccr2 = getCx86(CX86_CCR2);
33 setCx86(CX86_CCR2, ccr2 ^ 0x04);
34 getCx86(0xc0); /* dummy */
35
36 if (getCx86(CX86_CCR2) == ccr2) /* old Cx486SLC/DLC */
37 *dir0 = 0xfd;
38 else { /* Cx486S A step */
39 setCx86(CX86_CCR2, ccr2);
40 *dir0 = 0xfe;
41 }
42 } else {
43 setCx86(CX86_CCR3, ccr3); /* restore CCR3 */
44
45 /* read DIR0 and DIR1 CPU registers */
46 *dir0 = getCx86(CX86_DIR0);
47 *dir1 = getCx86(CX86_DIR1);
48 }
49}
50
51static void do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
52{
53 unsigned long flags;
54
55 local_irq_save(flags);
56 __do_cyrix_devid(dir0, dir1);
57 local_irq_restore(flags);
58}
59/*
60 * Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in
61 * order to identify the Cyrix CPU model after we're out of setup.c
62 *
63 * Actually since bugs.h doesn't even reference this perhaps someone should
64 * fix the documentation ???
65 */
66static unsigned char Cx86_dir0_msb = 0;
67
68static const char Cx86_model[][9] = {
69 "Cx486", "Cx486", "5x86 ", "6x86", "MediaGX ", "6x86MX ",
70 "M II ", "Unknown"
71};
72static const char Cx486_name[][5] = {
73 "SLC", "DLC", "SLC2", "DLC2", "SRx", "DRx",
74 "SRx2", "DRx2"
75};
76static const char Cx486S_name[][4] = {
77 "S", "S2", "Se", "S2e"
78};
79static const char Cx486D_name[][4] = {
80 "DX", "DX2", "?", "?", "?", "DX4"
81};
82static char Cx86_cb[] = "?.5x Core/Bus Clock";
83static const char cyrix_model_mult1[] = "12??43";
84static const char cyrix_model_mult2[] = "12233445";
85
86/*
87 * Reset the slow-loop (SLOP) bit on the 686(L) which is set by some old
88 * BIOSes for compatibility with DOS games. This makes the udelay loop
89 * work correctly, and improves performance.
90 *
91 * FIXME: our newer udelay uses the tsc. We don't need to frob with SLOP
92 */
93
94static void check_cx686_slop(struct cpuinfo_x86 *c)
95{
96 unsigned long flags;
97
98 if (Cx86_dir0_msb == 3) {
99 unsigned char ccr3, ccr5;
100
101 local_irq_save(flags);
102 ccr3 = getCx86(CX86_CCR3);
103 setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
104 ccr5 = getCx86(CX86_CCR5);
105 if (ccr5 & 2)
106 setCx86(CX86_CCR5, ccr5 & 0xfd); /* reset SLOP */
107 setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
108 local_irq_restore(flags);
109
110 if (ccr5 & 2) { /* possible wrong calibration done */
111 pr_info("Recalibrating delay loop with SLOP bit reset\n");
112 calibrate_delay();
113 c->loops_per_jiffy = loops_per_jiffy;
114 }
115 }
116}
117
118
119static void set_cx86_reorder(void)
120{
121 u8 ccr3;
122
123 pr_info("Enable Memory access reorder on Cyrix/NSC processor.\n");
124 ccr3 = getCx86(CX86_CCR3);
125 setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
126
127 /* Load/Store Serialize to mem access disable (=reorder it) */
128 setCx86(CX86_PCR0, getCx86(CX86_PCR0) & ~0x80);
129 /* set load/store serialize from 1GB to 4GB */
130 ccr3 |= 0xe0;
131 setCx86(CX86_CCR3, ccr3);
132}
133
134static void set_cx86_memwb(void)
135{
136 pr_info("Enable Memory-Write-back mode on Cyrix/NSC processor.\n");
137
138 /* CCR2 bit 2: unlock NW bit */
139 setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04);
140 /* set 'Not Write-through' */
141 write_cr0(read_cr0() | X86_CR0_NW);
142 /* CCR2 bit 2: lock NW bit and set WT1 */
143 setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14);
144}
145
146/*
147 * Configure later MediaGX and/or Geode processor.
148 */
149
150static void geode_configure(void)
151{
152 unsigned long flags;
153 u8 ccr3;
154 local_irq_save(flags);
155
156 /* Suspend on halt power saving */
157 setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x08);
158
159 ccr3 = getCx86(CX86_CCR3);
160 setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
161
162
163 /* FPU fast, DTE cache, Mem bypass */
164 setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38);
165 setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
166
167 set_cx86_memwb();
168 set_cx86_reorder();
169
170 local_irq_restore(flags);
171}
172
173static void early_init_cyrix(struct cpuinfo_x86 *c)
174{
175 unsigned char dir0, dir0_msn, dir1 = 0;
176
177 __do_cyrix_devid(&dir0, &dir1);
178 dir0_msn = dir0 >> 4; /* identifies CPU "family" */
179
180 switch (dir0_msn) {
181 case 3: /* 6x86/6x86L */
182 /* Emulate MTRRs using Cyrix's ARRs. */
183 set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
184 break;
185 case 5: /* 6x86MX/M II */
186 /* Emulate MTRRs using Cyrix's ARRs. */
187 set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
188 break;
189 }
190}
191
192static void init_cyrix(struct cpuinfo_x86 *c)
193{
194 unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0;
195 char *buf = c->x86_model_id;
196 const char *p = NULL;
197
198 /* Cyrix used bit 24 in extended (AMD) CPUID for Cyrix MMX extensions */
199 if (test_cpu_cap(c, 1*32+24)) {
200 clear_cpu_cap(c, 1*32+24);
201 set_cpu_cap(c, X86_FEATURE_CXMMX);
202 }
203
204 do_cyrix_devid(&dir0, &dir1);
205
206 check_cx686_slop(c);
207
208 Cx86_dir0_msb = dir0_msn = dir0 >> 4; /* identifies CPU "family" */
209 dir0_lsn = dir0 & 0xf; /* model or clock multiplier */
210
211 /* common case step number/rev -- exceptions handled below */
212 c->x86_model = (dir1 >> 4) + 1;
213 c->x86_stepping = dir1 & 0xf;
214
215 /* Now cook; the original recipe is by Channing Corn, from Cyrix.
216 * We do the same thing for each generation: we work out
217 * the model, multiplier and stepping. Black magic included,
218 * to make the silicon step/rev numbers match the printed ones.
219 */
220
221 switch (dir0_msn) {
222 unsigned char tmp;
223
224 case 0: /* Cx486SLC/DLC/SRx/DRx */
225 p = Cx486_name[dir0_lsn & 7];
226 break;
227
228 case 1: /* Cx486S/DX/DX2/DX4 */
229 p = (dir0_lsn & 8) ? Cx486D_name[dir0_lsn & 5]
230 : Cx486S_name[dir0_lsn & 3];
231 break;
232
233 case 2: /* 5x86 */
234 Cx86_cb[2] = cyrix_model_mult1[dir0_lsn & 5];
235 p = Cx86_cb+2;
236 break;
237
238 case 3: /* 6x86/6x86L */
239 Cx86_cb[1] = ' ';
240 Cx86_cb[2] = cyrix_model_mult1[dir0_lsn & 5];
241 if (dir1 > 0x21) { /* 686L */
242 Cx86_cb[0] = 'L';
243 p = Cx86_cb;
244 (c->x86_model)++;
245 } else /* 686 */
246 p = Cx86_cb+1;
247 /* Emulate MTRRs using Cyrix's ARRs. */
248 set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
249 /* 6x86's contain this bug */
250 set_cpu_bug(c, X86_BUG_COMA);
251 break;
252
253 case 4: /* MediaGX/GXm or Geode GXM/GXLV/GX1 */
254 case 11: /* GX1 with inverted Device ID */
255#ifdef CONFIG_PCI
256 {
257 u32 vendor, device;
258 /*
259 * It isn't really a PCI quirk directly, but the cure is the
260 * same. The MediaGX has deep magic SMM stuff that handles the
261 * SB emulation. It throws away the fifo on disable_dma() which
262 * is wrong and ruins the audio.
263 *
264 * Bug2: VSA1 has a wrap bug so that using maximum sized DMA
265 * causes bad things. According to NatSemi VSA2 has another
266 * bug to do with 'hlt'. I've not seen any boards using VSA2
267 * and X doesn't seem to support it either so who cares 8).
268 * VSA1 we work around however.
269 */
270
271 pr_info("Working around Cyrix MediaGX virtual DMA bugs.\n");
272 isa_dma_bridge_buggy = 2;
273
274 /* We do this before the PCI layer is running. However we
275 are safe here as we know the bridge must be a Cyrix
276 companion and must be present */
277 vendor = read_pci_config_16(0, 0, 0x12, PCI_VENDOR_ID);
278 device = read_pci_config_16(0, 0, 0x12, PCI_DEVICE_ID);
279
280 /*
281 * The 5510/5520 companion chips have a funky PIT.
282 */
283 if (vendor == PCI_VENDOR_ID_CYRIX &&
284 (device == PCI_DEVICE_ID_CYRIX_5510 ||
285 device == PCI_DEVICE_ID_CYRIX_5520))
286 mark_tsc_unstable("cyrix 5510/5520 detected");
287 }
288#endif
289 c->x86_cache_size = 16; /* Yep 16K integrated cache that's it */
290
291 /* GXm supports extended cpuid levels 'ala' AMD */
292 if (c->cpuid_level == 2) {
293 /* Enable cxMMX extensions (GX1 Datasheet 54) */
294 setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1);
295
296 /*
297 * GXm : 0x30 ... 0x5f GXm datasheet 51
298 * GXlv: 0x6x GXlv datasheet 54
299 * ? : 0x7x
300 * GX1 : 0x8x GX1 datasheet 56
301 */
302 if ((0x30 <= dir1 && dir1 <= 0x6f) ||
303 (0x80 <= dir1 && dir1 <= 0x8f))
304 geode_configure();
305 return;
306 } else { /* MediaGX */
307 Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4';
308 p = Cx86_cb+2;
309 c->x86_model = (dir1 & 0x20) ? 1 : 2;
310 }
311 break;
312
313 case 5: /* 6x86MX/M II */
314 if (dir1 > 7) {
315 dir0_msn++; /* M II */
316 /* Enable MMX extensions (App note 108) */
317 setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
318 } else {
319 /* A 6x86MX - it has the bug. */
320 set_cpu_bug(c, X86_BUG_COMA);
321 }
322 tmp = (!(dir0_lsn & 7) || dir0_lsn & 1) ? 2 : 0;
323 Cx86_cb[tmp] = cyrix_model_mult2[dir0_lsn & 7];
324 p = Cx86_cb+tmp;
325 if (((dir1 & 0x0f) > 4) || ((dir1 & 0xf0) == 0x20))
326 (c->x86_model)++;
327 /* Emulate MTRRs using Cyrix's ARRs. */
328 set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
329 break;
330
331 case 0xf: /* Cyrix 486 without DEVID registers */
332 switch (dir0_lsn) {
333 case 0xd: /* either a 486SLC or DLC w/o DEVID */
334 dir0_msn = 0;
335 p = Cx486_name[!!boot_cpu_has(X86_FEATURE_FPU)];
336 break;
337
338 case 0xe: /* a 486S A step */
339 dir0_msn = 0;
340 p = Cx486S_name[0];
341 break;
342 }
343 break;
344
345 default: /* unknown (shouldn't happen, we know everyone ;-) */
346 dir0_msn = 7;
347 break;
348 }
349 strcpy(buf, Cx86_model[dir0_msn & 7]);
350 if (p)
351 strcat(buf, p);
352 return;
353}
354
355/*
356 * Handle National Semiconductor branded processors
357 */
358static void init_nsc(struct cpuinfo_x86 *c)
359{
360 /*
361 * There may be GX1 processors in the wild that are branded
362 * NSC and not Cyrix.
363 *
364 * This function only handles the GX processor, and kicks every
365 * thing else to the Cyrix init function above - that should
366 * cover any processors that might have been branded differently
367 * after NSC acquired Cyrix.
368 *
369 * If this breaks your GX1 horribly, please e-mail
370 * [email protected] to tell us.
371 */
372
373 /* Handle the GX (Formally known as the GX2) */
374
375 if (c->x86 == 5 && c->x86_model == 5)
376 cpu_detect_cache_sizes(c);
377 else
378 init_cyrix(c);
379}
380
381/*
382 * Cyrix CPUs without cpuid or with cpuid not yet enabled can be detected
383 * by the fact that they preserve the flags across the division of 5/2.
384 * PII and PPro exhibit this behavior too, but they have cpuid available.
385 */
386
387/*
388 * Perform the Cyrix 5/2 test. A Cyrix won't change
389 * the flags, while other 486 chips will.
390 */
391static inline int test_cyrix_52div(void)
392{
393 unsigned int test;
394
395 __asm__ __volatile__(
396 "sahf\n\t" /* clear flags (%eax = 0x0005) */
397 "div %b2\n\t" /* divide 5 by 2 */
398 "lahf" /* store flags into %ah */
399 : "=a" (test)
400 : "0" (5), "q" (2)
401 : "cc");
402
403 /* AH is 0x02 on Cyrix after the divide.. */
404 return (unsigned char) (test >> 8) == 0x02;
405}
406
407static void cyrix_identify(struct cpuinfo_x86 *c)
408{
409 /* Detect Cyrix with disabled CPUID */
410 if (c->x86 == 4 && test_cyrix_52div()) {
411 unsigned char dir0, dir1;
412
413 strcpy(c->x86_vendor_id, "CyrixInstead");
414 c->x86_vendor = X86_VENDOR_CYRIX;
415
416 /* Actually enable cpuid on the older cyrix */
417
418 /* Retrieve CPU revisions */
419
420 do_cyrix_devid(&dir0, &dir1);
421
422 dir0 >>= 4;
423
424 /* Check it is an affected model */
425
426 if (dir0 == 5 || dir0 == 3) {
427 unsigned char ccr3;
428 unsigned long flags;
429 pr_info("Enabling CPUID on Cyrix processor.\n");
430 local_irq_save(flags);
431 ccr3 = getCx86(CX86_CCR3);
432 /* enable MAPEN */
433 setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);
434 /* enable cpuid */
435 setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x80);
436 /* disable MAPEN */
437 setCx86(CX86_CCR3, ccr3);
438 local_irq_restore(flags);
439 }
440 }
441}
442
443static const struct cpu_dev cyrix_cpu_dev = {
444 .c_vendor = "Cyrix",
445 .c_ident = { "CyrixInstead" },
446 .c_early_init = early_init_cyrix,
447 .c_init = init_cyrix,
448 .c_identify = cyrix_identify,
449 .c_x86_vendor = X86_VENDOR_CYRIX,
450};
451
452cpu_dev_register(cyrix_cpu_dev);
453
454static const struct cpu_dev nsc_cpu_dev = {
455 .c_vendor = "NSC",
456 .c_ident = { "Geode by NSC" },
457 .c_init = init_nsc,
458 .c_x86_vendor = X86_VENDOR_NSC,
459};
460
461cpu_dev_register(nsc_cpu_dev);