| 1 | |
| 2 | |
| 3 | * libata-acpi.c
|
| 4 | * Provides ACPI support for PATA/SATA.
|
| 5 | *
|
| 6 | * Copyright (C) 2006 Intel Corp.
|
| 7 | * Copyright (C) 2006 Randy Dunlap
|
| 8 |
|
| 9 |
|
| 10 | #include <linux/module.h>
|
| 11 | #include <linux/ata.h>
|
| 12 | #include <linux/delay.h>
|
| 13 | #include <linux/device.h>
|
| 14 | #include <linux/errno.h>
|
| 15 | #include <linux/kernel.h>
|
| 16 | #include <linux/acpi.h>
|
| 17 | #include <linux/libata.h>
|
| 18 | #include <linux/pci.h>
|
| 19 | #include <linux/slab.h>
|
| 20 | #include <linux/pm_runtime.h>
|
| 21 | #include <scsi/scsi_device.h>
|
| 22 | #include "libata.h"
|
| 23 |
|
| 24 | unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
|
| 25 | module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644);
|
| 26 | MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM, 0x8=FPDMA non-zero offset, 0x10=FPDMA DMA Setup FIS auto-activate)");
|
| 27 |
|
| 28 | #define NO_PORT_MULT 0xffff
|
| 29 | #define SATA_ADR(root, pmp) (((root) << 16) | (pmp))
|
| 30 |
|
| 31 | #define REGS_PER_GTF 7
|
| 32 | struct ata_acpi_gtf {
|
| 33 | u8 tf[REGS_PER_GTF];
|
| 34 | } __packed;
|
| 35 |
|
| 36 | static void ata_acpi_clear_gtf(struct ata_device *dev)
|
| 37 | {
|
| 38 | kfree(dev->gtf_cache);
|
| 39 | dev->gtf_cache = NULL;
|
| 40 | }
|
| 41 |
|
| 42 | struct ata_acpi_hotplug_context {
|
| 43 | struct acpi_hotplug_context hp;
|
| 44 | union {
|
| 45 | struct ata_port *ap;
|
| 46 | struct ata_device *dev;
|
| 47 | } data;
|
| 48 | };
|
| 49 |
|
| 50 | #define ata_hotplug_data(context) (container_of((context), struct ata_acpi_hotplug_context, hp)->data)
|
| 51 |
|
| 52 | |
| 53 | * ata_dev_acpi_handle - provide the acpi_handle for an ata_device
|
| 54 | * @dev: the acpi_handle returned will correspond to this device
|
| 55 | *
|
| 56 | * Returns the acpi_handle for the ACPI namespace object corresponding to
|
| 57 | * the ata_device passed into the function, or NULL if no such object exists
|
| 58 | * or ACPI is disabled for this device due to consecutive errors.
|
| 59 |
|
| 60 | acpi_handle ata_dev_acpi_handle(struct ata_device *dev)
|
| 61 | {
|
| 62 | return dev->flags & ATA_DFLAG_ACPI_DISABLED ?
|
| 63 | NULL : ACPI_HANDLE(&dev->tdev);
|
| 64 | }
|
| 65 |
|
| 66 |
|
| 67 | static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev)
|
| 68 | {
|
| 69 | if (dev)
|
| 70 | dev->flags |= ATA_DFLAG_DETACH;
|
| 71 | else {
|
| 72 | struct ata_link *tlink;
|
| 73 | struct ata_device *tdev;
|
| 74 |
|
| 75 | ata_for_each_link(tlink, ap, EDGE)
|
| 76 | ata_for_each_dev(tdev, tlink, ALL)
|
| 77 | tdev->flags |= ATA_DFLAG_DETACH;
|
| 78 | }
|
| 79 |
|
| 80 | ata_port_schedule_eh(ap);
|
| 81 | }
|
| 82 |
|
| 83 | |
| 84 | * ata_acpi_handle_hotplug - ACPI event handler backend
|
| 85 | * @ap: ATA port ACPI event occurred
|
| 86 | * @dev: ATA device ACPI event occurred (can be NULL)
|
| 87 | * @event: ACPI event which occurred
|
| 88 | *
|
| 89 | * All ACPI bay / device related events end up in this function. If
|
| 90 | * the event is port-wide @dev is NULL. If the event is specific to a
|
| 91 | * device, @dev points to it.
|
| 92 | *
|
| 93 | * Hotplug (as opposed to unplug) notification is always handled as
|
| 94 | * port-wide while unplug only kills the target device on device-wide
|
| 95 | * event.
|
| 96 | *
|
| 97 | * LOCKING:
|
| 98 | * ACPI notify handler context. May sleep.
|
| 99 |
|
| 100 | static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
|
| 101 | u32 event)
|
| 102 | {
|
| 103 | struct ata_eh_info *ehi = &ap->link.eh_info;
|
| 104 | int wait = 0;
|
| 105 | unsigned long flags;
|
| 106 |
|
| 107 | spin_lock_irqsave(ap->lock, flags);
|
| 108 | |
| 109 | * When dock driver calls into the routine, it will always use
|
| 110 | * ACPI_NOTIFY_BUS_CHECK/ACPI_NOTIFY_DEVICE_CHECK for add and
|
| 111 | * ACPI_NOTIFY_EJECT_REQUEST for remove
|
| 112 |
|
| 113 | switch (event) {
|
| 114 | case ACPI_NOTIFY_BUS_CHECK:
|
| 115 | case ACPI_NOTIFY_DEVICE_CHECK:
|
| 116 | ata_ehi_push_desc(ehi, "ACPI event");
|
| 117 |
|
| 118 | ata_ehi_hotplugged(ehi);
|
| 119 | ata_port_freeze(ap);
|
| 120 | break;
|
| 121 | case ACPI_NOTIFY_EJECT_REQUEST:
|
| 122 | ata_ehi_push_desc(ehi, "ACPI event");
|
| 123 |
|
| 124 | ata_acpi_detach_device(ap, dev);
|
| 125 | wait = 1;
|
| 126 | break;
|
| 127 | }
|
| 128 |
|
| 129 | spin_unlock_irqrestore(ap->lock, flags);
|
| 130 |
|
| 131 | if (wait)
|
| 132 | ata_port_wait_eh(ap);
|
| 133 | }
|
| 134 |
|
| 135 | static int ata_acpi_dev_notify_dock(struct acpi_device *adev, u32 event)
|
| 136 | {
|
| 137 | struct ata_device *dev = ata_hotplug_data(adev->hp).dev;
|
| 138 | ata_acpi_handle_hotplug(dev->link->ap, dev, event);
|
| 139 | return 0;
|
| 140 | }
|
| 141 |
|
| 142 | static int ata_acpi_ap_notify_dock(struct acpi_device *adev, u32 event)
|
| 143 | {
|
| 144 | ata_acpi_handle_hotplug(ata_hotplug_data(adev->hp).ap, NULL, event);
|
| 145 | return 0;
|
| 146 | }
|
| 147 |
|
| 148 | static void ata_acpi_uevent(struct ata_port *ap, struct ata_device *dev,
|
| 149 | u32 event)
|
| 150 | {
|
| 151 | struct kobject *kobj = NULL;
|
| 152 | char event_string[20];
|
| 153 | char *envp[] = { event_string, NULL };
|
| 154 |
|
| 155 | if (dev) {
|
| 156 | if (dev->sdev)
|
| 157 | kobj = &dev->sdev->sdev_gendev.kobj;
|
| 158 | } else
|
| 159 | kobj = &ap->dev->kobj;
|
| 160 |
|
| 161 | if (kobj) {
|
| 162 | snprintf(event_string, 20, "BAY_EVENT=%d", event);
|
| 163 | kobject_uevent_env(kobj, KOBJ_CHANGE, envp);
|
| 164 | }
|
| 165 | }
|
| 166 |
|
| 167 | static void ata_acpi_ap_uevent(struct acpi_device *adev, u32 event)
|
| 168 | {
|
| 169 | ata_acpi_uevent(ata_hotplug_data(adev->hp).ap, NULL, event);
|
| 170 | }
|
| 171 |
|
| 172 | static void ata_acpi_dev_uevent(struct acpi_device *adev, u32 event)
|
| 173 | {
|
| 174 | struct ata_device *dev = ata_hotplug_data(adev->hp).dev;
|
| 175 | ata_acpi_uevent(dev->link->ap, dev, event);
|
| 176 | }
|
| 177 |
|
| 178 |
|
| 179 | void ata_acpi_bind_port(struct ata_port *ap)
|
| 180 | {
|
| 181 | struct acpi_device *host_companion = ACPI_COMPANION(ap->host->dev);
|
| 182 | struct acpi_device *adev;
|
| 183 | struct ata_acpi_hotplug_context *context;
|
| 184 |
|
| 185 | if (libata_noacpi || ap->flags & ATA_FLAG_ACPI_SATA || !host_companion)
|
| 186 | return;
|
| 187 |
|
| 188 | acpi_preset_companion(&ap->tdev, host_companion, ap->port_no);
|
| 189 |
|
| 190 | if (ata_acpi_gtm(ap, &ap->__acpi_init_gtm) == 0)
|
| 191 | ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
|
| 192 |
|
| 193 | adev = ACPI_COMPANION(&ap->tdev);
|
| 194 | if (!adev || adev->hp)
|
| 195 | return;
|
| 196 |
|
| 197 | context = kzalloc_obj(*context);
|
| 198 | if (!context)
|
| 199 | return;
|
| 200 |
|
| 201 | context->data.ap = ap;
|
| 202 | acpi_initialize_hp_context(adev, &context->hp, ata_acpi_ap_notify_dock,
|
| 203 | ata_acpi_ap_uevent);
|
| 204 | }
|
| 205 |
|
| 206 | void ata_acpi_bind_dev(struct ata_device *dev)
|
| 207 | {
|
| 208 | struct ata_port *ap = dev->link->ap;
|
| 209 | struct acpi_device *port_companion = ACPI_COMPANION(&ap->tdev);
|
| 210 | struct acpi_device *host_companion = ACPI_COMPANION(ap->host->dev);
|
| 211 | struct acpi_device *parent, *adev;
|
| 212 | struct ata_acpi_hotplug_context *context;
|
| 213 | u64 adr;
|
| 214 |
|
| 215 | |
| 216 | * For both sata/pata devices, host companion device is required.
|
| 217 | * For pata device, port companion device is also required.
|
| 218 |
|
| 219 | if (libata_noacpi || !host_companion ||
|
| 220 | (!(ap->flags & ATA_FLAG_ACPI_SATA) && !port_companion))
|
| 221 | return;
|
| 222 |
|
| 223 | if (ap->flags & ATA_FLAG_ACPI_SATA) {
|
| 224 | if (!sata_pmp_attached(ap))
|
| 225 | adr = SATA_ADR(ap->port_no, NO_PORT_MULT);
|
| 226 | else
|
| 227 | adr = SATA_ADR(ap->port_no, dev->link->pmp);
|
| 228 | parent = host_companion;
|
| 229 | } else {
|
| 230 | adr = dev->devno;
|
| 231 | parent = port_companion;
|
| 232 | }
|
| 233 |
|
| 234 | acpi_preset_companion(&dev->tdev, parent, adr);
|
| 235 | adev = ACPI_COMPANION(&dev->tdev);
|
| 236 | if (!adev || adev->hp)
|
| 237 | return;
|
| 238 |
|
| 239 | context = kzalloc_obj(*context);
|
| 240 | if (!context)
|
| 241 | return;
|
| 242 |
|
| 243 | context->data.dev = dev;
|
| 244 | acpi_initialize_hp_context(adev, &context->hp, ata_acpi_dev_notify_dock,
|
| 245 | ata_acpi_dev_uevent);
|
| 246 | }
|
| 247 |
|
| 248 | |
| 249 | * ata_acpi_dev_manage_restart - if the disk should be stopped (spun down) on
|
| 250 | * system restart.
|
| 251 | * @dev: target ATA device
|
| 252 | *
|
| 253 | * RETURNS:
|
| 254 | * true if the disk should be stopped, otherwise false.
|
| 255 |
|
| 256 | bool ata_acpi_dev_manage_restart(struct ata_device *dev)
|
| 257 | {
|
| 258 | struct device *tdev;
|
| 259 |
|
| 260 | |
| 261 | * If ATA_FLAG_ACPI_SATA is set, the acpi fwnode is attached to the
|
| 262 | * ata_device instead of the ata_port.
|
| 263 |
|
| 264 | if (dev->link->ap->flags & ATA_FLAG_ACPI_SATA)
|
| 265 | tdev = &dev->tdev;
|
| 266 | else
|
| 267 | tdev = &dev->link->ap->tdev;
|
| 268 |
|
| 269 | if (!is_acpi_device_node(tdev->fwnode))
|
| 270 | return false;
|
| 271 | return acpi_bus_power_manageable(ACPI_HANDLE(tdev));
|
| 272 | }
|
| 273 |
|
| 274 | |
| 275 | * ata_acpi_port_power_on - set the power state of the ata port to D0
|
| 276 | * @ap: target ATA port
|
| 277 | *
|
| 278 | * This function is called at the beginning of ata_port_probe().
|
| 279 |
|
| 280 | void ata_acpi_port_power_on(struct ata_port *ap)
|
| 281 | {
|
| 282 | acpi_handle handle;
|
| 283 | int i;
|
| 284 |
|
| 285 | |
| 286 | * If ATA_FLAG_ACPI_SATA is set, the acpi fwnode is attached to the
|
| 287 | * ata_device instead of the ata_port.
|
| 288 |
|
| 289 | if (ap->flags & ATA_FLAG_ACPI_SATA) {
|
| 290 | for (i = 0; i < ATA_MAX_DEVICES; i++) {
|
| 291 | struct ata_device *dev = &ap->link.device[i];
|
| 292 |
|
| 293 | if (!is_acpi_device_node(dev->tdev.fwnode))
|
| 294 | continue;
|
| 295 | handle = ACPI_HANDLE(&dev->tdev);
|
| 296 | if (!acpi_bus_power_manageable(handle))
|
| 297 | continue;
|
| 298 | if (acpi_bus_set_power(handle, ACPI_STATE_D0))
|
| 299 | ata_dev_err(dev,
|
| 300 | "acpi: failed to set power state to D0\n");
|
| 301 | }
|
| 302 | return;
|
| 303 | }
|
| 304 |
|
| 305 | if (!is_acpi_device_node(ap->tdev.fwnode))
|
| 306 | return;
|
| 307 | handle = ACPI_HANDLE(&ap->tdev);
|
| 308 | if (!acpi_bus_power_manageable(handle))
|
| 309 | return;
|
| 310 |
|
| 311 | if (acpi_bus_set_power(handle, ACPI_STATE_D0))
|
| 312 | ata_port_err(ap, "acpi: failed to set power state to D0\n");
|
| 313 | }
|
| 314 |
|
| 315 | |
| 316 | * ata_acpi_dissociate - dissociate ATA host from ACPI objects
|
| 317 | * @host: target ATA host
|
| 318 | *
|
| 319 | * This function is called during driver detach after the whole host
|
| 320 | * is shut down.
|
| 321 | *
|
| 322 | * LOCKING:
|
| 323 | * EH context.
|
| 324 |
|
| 325 | void ata_acpi_dissociate(struct ata_host *host)
|
| 326 | {
|
| 327 | int i;
|
| 328 |
|
| 329 | |
| 330 | * afterward can use them too.
|
| 331 |
|
| 332 | for (i = 0; i < host->n_ports; i++) {
|
| 333 | struct ata_port *ap = host->ports[i];
|
| 334 | const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap);
|
| 335 |
|
| 336 | if (ACPI_HANDLE(&ap->tdev) && gtm)
|
| 337 | ata_acpi_stm(ap, gtm);
|
| 338 | }
|
| 339 | }
|
| 340 |
|
| 341 | |
| 342 | * ata_acpi_gtm - execute _GTM
|
| 343 | * @ap: target ATA port
|
| 344 | * @gtm: out parameter for _GTM result
|
| 345 | *
|
| 346 | * Evaluate _GTM and store the result in @gtm.
|
| 347 | *
|
| 348 | * LOCKING:
|
| 349 | * EH context.
|
| 350 | *
|
| 351 | * RETURNS:
|
| 352 | * 0 on success, -ENOENT if _GTM doesn't exist, -errno on failure.
|
| 353 |
|
| 354 | int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *gtm)
|
| 355 | {
|
| 356 | struct acpi_buffer output = { .length = ACPI_ALLOCATE_BUFFER };
|
| 357 | union acpi_object *out_obj;
|
| 358 | acpi_status status;
|
| 359 | int rc = 0;
|
| 360 | acpi_handle handle = ACPI_HANDLE(&ap->tdev);
|
| 361 |
|
| 362 | if (!handle)
|
| 363 | return -EINVAL;
|
| 364 |
|
| 365 | status = acpi_evaluate_object(handle, "_GTM", NULL, &output);
|
| 366 |
|
| 367 | rc = -ENOENT;
|
| 368 | if (status == AE_NOT_FOUND)
|
| 369 | goto out_free;
|
| 370 |
|
| 371 | rc = -EINVAL;
|
| 372 | if (ACPI_FAILURE(status)) {
|
| 373 | ata_port_err(ap, "ACPI get timing mode failed (AE 0x%x)\n",
|
| 374 | status);
|
| 375 | goto out_free;
|
| 376 | }
|
| 377 |
|
| 378 | out_obj = output.pointer;
|
| 379 | if (out_obj->type != ACPI_TYPE_BUFFER) {
|
| 380 | ata_port_warn(ap, "_GTM returned unexpected object type 0x%x\n",
|
| 381 | out_obj->type);
|
| 382 |
|
| 383 | goto out_free;
|
| 384 | }
|
| 385 |
|
| 386 | if (out_obj->buffer.length != sizeof(struct ata_acpi_gtm)) {
|
| 387 | ata_port_err(ap, "_GTM returned invalid length %d\n",
|
| 388 | out_obj->buffer.length);
|
| 389 | goto out_free;
|
| 390 | }
|
| 391 |
|
| 392 | memcpy(gtm, out_obj->buffer.pointer, sizeof(struct ata_acpi_gtm));
|
| 393 | rc = 0;
|
| 394 | out_free:
|
| 395 | kfree(output.pointer);
|
| 396 | return rc;
|
| 397 | }
|
| 398 |
|
| 399 | EXPORT_SYMBOL_GPL(ata_acpi_gtm);
|
| 400 |
|
| 401 | |
| 402 | * ata_acpi_stm - execute _STM
|
| 403 | * @ap: target ATA port
|
| 404 | * @stm: timing parameter to _STM
|
| 405 | *
|
| 406 | * Evaluate _STM with timing parameter @stm.
|
| 407 | *
|
| 408 | * LOCKING:
|
| 409 | * EH context.
|
| 410 | *
|
| 411 | * RETURNS:
|
| 412 | * 0 on success, -ENOENT if _STM doesn't exist, -errno on failure.
|
| 413 |
|
| 414 | int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm)
|
| 415 | {
|
| 416 | acpi_status status;
|
| 417 | struct ata_acpi_gtm stm_buf = *stm;
|
| 418 | struct acpi_object_list input;
|
| 419 | union acpi_object in_params[3];
|
| 420 |
|
| 421 | in_params[0].type = ACPI_TYPE_BUFFER;
|
| 422 | in_params[0].buffer.length = sizeof(struct ata_acpi_gtm);
|
| 423 | in_params[0].buffer.pointer = (u8 *)&stm_buf;
|
| 424 |
|
| 425 | in_params[1].type = ACPI_TYPE_BUFFER;
|
| 426 | in_params[1].buffer.length = 512;
|
| 427 | in_params[1].buffer.pointer = (u8 *)ap->link.device[0].id;
|
| 428 | in_params[2].type = ACPI_TYPE_BUFFER;
|
| 429 | in_params[2].buffer.length = 512;
|
| 430 | in_params[2].buffer.pointer = (u8 *)ap->link.device[1].id;
|
| 431 |
|
| 432 | input.count = 3;
|
| 433 | input.pointer = in_params;
|
| 434 |
|
| 435 | status = acpi_evaluate_object(ACPI_HANDLE(&ap->tdev), "_STM",
|
| 436 | &input, NULL);
|
| 437 |
|
| 438 | if (status == AE_NOT_FOUND)
|
| 439 | return -ENOENT;
|
| 440 | if (ACPI_FAILURE(status)) {
|
| 441 | ata_port_err(ap, "ACPI set timing mode failed (status=0x%x)\n",
|
| 442 | status);
|
| 443 | return -EINVAL;
|
| 444 | }
|
| 445 | return 0;
|
| 446 | }
|
| 447 |
|
| 448 | EXPORT_SYMBOL_GPL(ata_acpi_stm);
|
| 449 |
|
| 450 | |
| 451 | * ata_dev_get_GTF - get the drive bootup default taskfile settings
|
| 452 | * @dev: target ATA device
|
| 453 | * @gtf: output parameter for buffer containing _GTF taskfile arrays
|
| 454 | *
|
| 455 | * This applies to both PATA and SATA drives.
|
| 456 | *
|
| 457 | * The _GTF method has no input parameters.
|
| 458 | * It returns a variable number of register set values (registers
|
| 459 | * hex 1F1..1F7, taskfiles).
|
| 460 | * The <variable number> is not known in advance, so have ACPI-CA
|
| 461 | * allocate the buffer as needed and return it, then free it later.
|
| 462 | *
|
| 463 | * LOCKING:
|
| 464 | * EH context.
|
| 465 | *
|
| 466 | * RETURNS:
|
| 467 | * Number of taskfiles on success, 0 if _GTF doesn't exist. -EINVAL
|
| 468 | * if _GTF is invalid.
|
| 469 |
|
| 470 | static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf)
|
| 471 | {
|
| 472 | acpi_status status;
|
| 473 | struct acpi_buffer output;
|
| 474 | union acpi_object *out_obj;
|
| 475 | int rc = 0;
|
| 476 |
|
| 477 |
|
| 478 | if (dev->gtf_cache) {
|
| 479 | out_obj = dev->gtf_cache;
|
| 480 | goto done;
|
| 481 | }
|
| 482 |
|
| 483 |
|
| 484 | output.length = ACPI_ALLOCATE_BUFFER;
|
| 485 | output.pointer = NULL;
|
| 486 |
|
| 487 |
|
| 488 | status = acpi_evaluate_object(ata_dev_acpi_handle(dev), "_GTF", NULL,
|
| 489 | &output);
|
| 490 | out_obj = dev->gtf_cache = output.pointer;
|
| 491 |
|
| 492 | if (ACPI_FAILURE(status)) {
|
| 493 | if (status != AE_NOT_FOUND) {
|
| 494 | ata_dev_warn(dev, "_GTF evaluation failed (AE 0x%x)\n",
|
| 495 | status);
|
| 496 | rc = -EINVAL;
|
| 497 | }
|
| 498 | goto out_free;
|
| 499 | }
|
| 500 |
|
| 501 | if (!output.length || !output.pointer) {
|
| 502 | ata_dev_dbg(dev, "Run _GTF: length or ptr is NULL (0x%llx, 0x%p)\n",
|
| 503 | (unsigned long long)output.length,
|
| 504 | output.pointer);
|
| 505 | rc = -EINVAL;
|
| 506 | goto out_free;
|
| 507 | }
|
| 508 |
|
| 509 | if (out_obj->type != ACPI_TYPE_BUFFER) {
|
| 510 | ata_dev_warn(dev, "_GTF unexpected object type 0x%x\n",
|
| 511 | out_obj->type);
|
| 512 | rc = -EINVAL;
|
| 513 | goto out_free;
|
| 514 | }
|
| 515 |
|
| 516 | if (out_obj->buffer.length % REGS_PER_GTF) {
|
| 517 | ata_dev_warn(dev, "unexpected _GTF length (%d)\n",
|
| 518 | out_obj->buffer.length);
|
| 519 | rc = -EINVAL;
|
| 520 | goto out_free;
|
| 521 | }
|
| 522 |
|
| 523 | done:
|
| 524 | rc = out_obj->buffer.length / REGS_PER_GTF;
|
| 525 | if (gtf) {
|
| 526 | *gtf = (void *)out_obj->buffer.pointer;
|
| 527 | ata_dev_dbg(dev, "returning gtf=%p, gtf_count=%d\n",
|
| 528 | *gtf, rc);
|
| 529 | }
|
| 530 | return rc;
|
| 531 |
|
| 532 | out_free:
|
| 533 | ata_acpi_clear_gtf(dev);
|
| 534 | return rc;
|
| 535 | }
|
| 536 |
|
| 537 | |
| 538 | * ata_acpi_gtm_xfermask - determine xfermode from GTM parameter
|
| 539 | * @dev: target device
|
| 540 | * @gtm: GTM parameter to use
|
| 541 | *
|
| 542 | * Determine xfermask for @dev from @gtm.
|
| 543 | *
|
| 544 | * LOCKING:
|
| 545 | * None.
|
| 546 | *
|
| 547 | * RETURNS:
|
| 548 | * Determined xfermask.
|
| 549 |
|
| 550 | unsigned int ata_acpi_gtm_xfermask(struct ata_device *dev,
|
| 551 | const struct ata_acpi_gtm *gtm)
|
| 552 | {
|
| 553 | unsigned int xfer_mask = 0;
|
| 554 | unsigned int type;
|
| 555 | int unit;
|
| 556 | u8 mode;
|
| 557 |
|
| 558 |
|
| 559 | unit = dev->devno;
|
| 560 | if (!(gtm->flags & 0x10))
|
| 561 | unit = 0;
|
| 562 |
|
| 563 |
|
| 564 | mode = ata_timing_cycle2mode(ATA_SHIFT_PIO, gtm->drive[unit].pio);
|
| 565 | xfer_mask |= ata_xfer_mode2mask(mode);
|
| 566 |
|
| 567 | |
| 568 | * MWDMA if UDMA is available as this means the BIOS set UDMA
|
| 569 | * and our error changedown if it works is UDMA to PIO anyway.
|
| 570 |
|
| 571 | if (!(gtm->flags & (1 << (2 * unit))))
|
| 572 | type = ATA_SHIFT_MWDMA;
|
| 573 | else
|
| 574 | type = ATA_SHIFT_UDMA;
|
| 575 |
|
| 576 | mode = ata_timing_cycle2mode(type, gtm->drive[unit].dma);
|
| 577 | xfer_mask |= ata_xfer_mode2mask(mode);
|
| 578 |
|
| 579 | return xfer_mask;
|
| 580 | }
|
| 581 | EXPORT_SYMBOL_GPL(ata_acpi_gtm_xfermask);
|
| 582 |
|
| 583 | |
| 584 | * ata_acpi_cbl_pata_type - Return PATA cable type
|
| 585 | * @ap: Port to check
|
| 586 | *
|
| 587 | * Return ATA_CBL_PATA* according to the transfer mode selected by BIOS
|
| 588 |
|
| 589 | int ata_acpi_cbl_pata_type(struct ata_port *ap)
|
| 590 | {
|
| 591 | struct ata_device *dev;
|
| 592 | int ret = ATA_CBL_PATA_UNK;
|
| 593 | const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap);
|
| 594 |
|
| 595 | if (!gtm)
|
| 596 | return ATA_CBL_PATA40;
|
| 597 |
|
| 598 | ata_for_each_dev(dev, &ap->link, ENABLED) {
|
| 599 | unsigned int xfer_mask, udma_mask;
|
| 600 |
|
| 601 | xfer_mask = ata_acpi_gtm_xfermask(dev, gtm);
|
| 602 | ata_unpack_xfermask(xfer_mask, NULL, NULL, &udma_mask);
|
| 603 |
|
| 604 | ret = ATA_CBL_PATA40;
|
| 605 |
|
| 606 | if (udma_mask & ~ATA_UDMA_MASK_40C) {
|
| 607 | ret = ATA_CBL_PATA80;
|
| 608 | break;
|
| 609 | }
|
| 610 | }
|
| 611 |
|
| 612 | return ret;
|
| 613 | }
|
| 614 | EXPORT_SYMBOL_GPL(ata_acpi_cbl_pata_type);
|
| 615 |
|
| 616 | static void ata_acpi_gtf_to_tf(struct ata_device *dev,
|
| 617 | const struct ata_acpi_gtf *gtf,
|
| 618 | struct ata_taskfile *tf)
|
| 619 | {
|
| 620 | ata_tf_init(dev, tf);
|
| 621 |
|
| 622 | tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
|
| 623 | tf->protocol = ATA_PROT_NODATA;
|
| 624 | tf->error = gtf->tf[0];
|
| 625 | tf->nsect = gtf->tf[1];
|
| 626 | tf->lbal = gtf->tf[2];
|
| 627 | tf->lbam = gtf->tf[3];
|
| 628 | tf->lbah = gtf->tf[4];
|
| 629 | tf->device = gtf->tf[5];
|
| 630 | tf->status = gtf->tf[6];
|
| 631 | }
|
| 632 |
|
| 633 | static int ata_acpi_filter_tf(struct ata_device *dev,
|
| 634 | const struct ata_taskfile *tf,
|
| 635 | const struct ata_taskfile *ptf)
|
| 636 | {
|
| 637 | if (dev->gtf_filter & ATA_ACPI_FILTER_SETXFER) {
|
| 638 | |
| 639 | * It will only confuse device configuration. Skip.
|
| 640 |
|
| 641 | if (tf->command == ATA_CMD_SET_FEATURES &&
|
| 642 | tf->feature == SETFEATURES_XFER)
|
| 643 | return 1;
|
| 644 | }
|
| 645 |
|
| 646 | if (dev->gtf_filter & ATA_ACPI_FILTER_LOCK) {
|
| 647 | |
| 648 | * features unless the user explicitly said so.
|
| 649 |
|
| 650 |
|
| 651 |
|
| 652 | if (tf->command == ATA_CMD_CONF_OVERLAY &&
|
| 653 | tf->feature == ATA_DCO_FREEZE_LOCK)
|
| 654 | return 1;
|
| 655 |
|
| 656 |
|
| 657 | if (tf->command == ATA_CMD_SEC_FREEZE_LOCK)
|
| 658 | return 1;
|
| 659 |
|
| 660 |
|
| 661 | if ((!ptf || ptf->command != ATA_CMD_READ_NATIVE_MAX) &&
|
| 662 | tf->command == ATA_CMD_SET_MAX &&
|
| 663 | (tf->feature == ATA_SET_MAX_LOCK ||
|
| 664 | tf->feature == ATA_SET_MAX_FREEZE_LOCK))
|
| 665 | return 1;
|
| 666 | }
|
| 667 |
|
| 668 | if (tf->command == ATA_CMD_SET_FEATURES &&
|
| 669 | tf->feature == SETFEATURES_SATA_ENABLE) {
|
| 670 |
|
| 671 | if (dev->gtf_filter & ATA_ACPI_FILTER_DIPM &&
|
| 672 | tf->nsect == SATA_DIPM)
|
| 673 | return 1;
|
| 674 |
|
| 675 |
|
| 676 | if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_OFFSET &&
|
| 677 | (tf->nsect == SATA_FPDMA_OFFSET ||
|
| 678 | tf->nsect == SATA_FPDMA_IN_ORDER))
|
| 679 | return 1;
|
| 680 |
|
| 681 |
|
| 682 | if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_AA &&
|
| 683 | tf->nsect == SATA_FPDMA_AA)
|
| 684 | return 1;
|
| 685 | }
|
| 686 |
|
| 687 | return 0;
|
| 688 | }
|
| 689 |
|
| 690 | |
| 691 | * ata_acpi_run_tf - send taskfile registers to host controller
|
| 692 | * @dev: target ATA device
|
| 693 | * @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7)
|
| 694 | * @prev_gtf: previous command
|
| 695 | *
|
| 696 | * Outputs ATA taskfile to standard ATA host controller.
|
| 697 | * Writes the control, feature, nsect, lbal, lbam, and lbah registers.
|
| 698 | * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect,
|
| 699 | * hob_lbal, hob_lbam, and hob_lbah.
|
| 700 | *
|
| 701 | * This function waits for idle (!BUSY and !DRQ) after writing
|
| 702 | * registers. If the control register has a new value, this
|
| 703 | * function also waits for idle after writing control and before
|
| 704 | * writing the remaining registers.
|
| 705 | *
|
| 706 | * LOCKING:
|
| 707 | * EH context.
|
| 708 | *
|
| 709 | * RETURNS:
|
| 710 | * 1 if command is executed successfully. 0 if ignored, rejected or
|
| 711 | * filtered out, -errno on other errors.
|
| 712 |
|
| 713 | static int ata_acpi_run_tf(struct ata_device *dev,
|
| 714 | const struct ata_acpi_gtf *gtf,
|
| 715 | const struct ata_acpi_gtf *prev_gtf)
|
| 716 | {
|
| 717 | struct ata_taskfile *pptf = NULL;
|
| 718 | struct ata_taskfile tf, ptf, rtf;
|
| 719 | unsigned int err_mask;
|
| 720 | const char *descr;
|
| 721 | int rc;
|
| 722 |
|
| 723 | if ((gtf->tf[0] == 0) && (gtf->tf[1] == 0) && (gtf->tf[2] == 0)
|
| 724 | && (gtf->tf[3] == 0) && (gtf->tf[4] == 0) && (gtf->tf[5] == 0)
|
| 725 | && (gtf->tf[6] == 0))
|
| 726 | return 0;
|
| 727 |
|
| 728 | ata_acpi_gtf_to_tf(dev, gtf, &tf);
|
| 729 | if (prev_gtf) {
|
| 730 | ata_acpi_gtf_to_tf(dev, prev_gtf, &ptf);
|
| 731 | pptf = &ptf;
|
| 732 | }
|
| 733 |
|
| 734 | descr = ata_get_cmd_name(tf.command);
|
| 735 |
|
| 736 | if (!ata_acpi_filter_tf(dev, &tf, pptf)) {
|
| 737 | rtf = tf;
|
| 738 | err_mask = ata_exec_internal(dev, &rtf, NULL,
|
| 739 | DMA_NONE, NULL, 0, 0);
|
| 740 |
|
| 741 | switch (err_mask) {
|
| 742 | case 0:
|
| 743 | ata_dev_dbg(dev,
|
| 744 | "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x"
|
| 745 | "(%s) succeeded\n",
|
| 746 | tf.command, tf.feature, tf.nsect, tf.lbal,
|
| 747 | tf.lbam, tf.lbah, tf.device, descr);
|
| 748 | rc = 1;
|
| 749 | break;
|
| 750 |
|
| 751 | case AC_ERR_DEV:
|
| 752 | ata_dev_info(dev,
|
| 753 | "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x"
|
| 754 | "(%s) rejected by device (Stat=0x%02x Err=0x%02x)",
|
| 755 | tf.command, tf.feature, tf.nsect, tf.lbal,
|
| 756 | tf.lbam, tf.lbah, tf.device, descr,
|
| 757 | rtf.status, rtf.error);
|
| 758 | rc = 0;
|
| 759 | break;
|
| 760 |
|
| 761 | default:
|
| 762 | ata_dev_err(dev,
|
| 763 | "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x"
|
| 764 | "(%s) failed (Emask=0x%x Stat=0x%02x Err=0x%02x)",
|
| 765 | tf.command, tf.feature, tf.nsect, tf.lbal,
|
| 766 | tf.lbam, tf.lbah, tf.device, descr,
|
| 767 | err_mask, rtf.status, rtf.error);
|
| 768 | rc = -EIO;
|
| 769 | break;
|
| 770 | }
|
| 771 | } else {
|
| 772 | ata_dev_info(dev,
|
| 773 | "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x"
|
| 774 | "(%s) filtered out\n",
|
| 775 | tf.command, tf.feature, tf.nsect, tf.lbal,
|
| 776 | tf.lbam, tf.lbah, tf.device, descr);
|
| 777 | rc = 0;
|
| 778 | }
|
| 779 | return rc;
|
| 780 | }
|
| 781 |
|
| 782 | |
| 783 | * ata_acpi_exec_tfs - get then write drive taskfile settings
|
| 784 | * @dev: target ATA device
|
| 785 | * @nr_executed: out parameter for the number of executed commands
|
| 786 | *
|
| 787 | * Evaluate _GTF and execute returned taskfiles.
|
| 788 | *
|
| 789 | * LOCKING:
|
| 790 | * EH context.
|
| 791 | *
|
| 792 | * RETURNS:
|
| 793 | * Number of executed taskfiles on success, 0 if _GTF doesn't exist.
|
| 794 | * -errno on other errors.
|
| 795 |
|
| 796 | static int ata_acpi_exec_tfs(struct ata_device *dev, int *nr_executed)
|
| 797 | {
|
| 798 | struct ata_acpi_gtf *gtf = NULL, *pgtf = NULL;
|
| 799 | int gtf_count, i, rc;
|
| 800 |
|
| 801 |
|
| 802 | rc = ata_dev_get_GTF(dev, >f);
|
| 803 | if (rc < 0)
|
| 804 | return rc;
|
| 805 | gtf_count = rc;
|
| 806 |
|
| 807 |
|
| 808 | for (i = 0; i < gtf_count; i++, gtf++) {
|
| 809 | rc = ata_acpi_run_tf(dev, gtf, pgtf);
|
| 810 | if (rc < 0)
|
| 811 | break;
|
| 812 | if (rc) {
|
| 813 | (*nr_executed)++;
|
| 814 | pgtf = gtf;
|
| 815 | }
|
| 816 | }
|
| 817 |
|
| 818 | ata_acpi_clear_gtf(dev);
|
| 819 |
|
| 820 | if (rc < 0)
|
| 821 | return rc;
|
| 822 | return 0;
|
| 823 | }
|
| 824 |
|
| 825 | |
| 826 | * ata_acpi_push_id - send Identify data to drive
|
| 827 | * @dev: target ATA device
|
| 828 | *
|
| 829 | * _SDD ACPI object: for SATA mode only
|
| 830 | * Must be after Identify (Packet) Device -- uses its data
|
| 831 | * ATM this function never returns a failure. It is an optional
|
| 832 | * method and if it fails for whatever reason, we should still
|
| 833 | * just keep going.
|
| 834 | *
|
| 835 | * LOCKING:
|
| 836 | * EH context.
|
| 837 | *
|
| 838 | * RETURNS:
|
| 839 | * 0 on success, -ENOENT if _SDD doesn't exist, -errno on failure.
|
| 840 |
|
| 841 | static int ata_acpi_push_id(struct ata_device *dev)
|
| 842 | {
|
| 843 | struct ata_port *ap = dev->link->ap;
|
| 844 | acpi_status status;
|
| 845 | struct acpi_object_list input;
|
| 846 | union acpi_object in_params[1];
|
| 847 |
|
| 848 | ata_dev_dbg(dev, "%s: ix = %d, port#: %d\n",
|
| 849 | __func__, dev->devno, ap->port_no);
|
| 850 |
|
| 851 |
|
| 852 |
|
| 853 | input.count = 1;
|
| 854 | input.pointer = in_params;
|
| 855 | in_params[0].type = ACPI_TYPE_BUFFER;
|
| 856 | in_params[0].buffer.length = sizeof(dev->id[0]) * ATA_ID_WORDS;
|
| 857 | in_params[0].buffer.pointer = (u8 *)dev->id;
|
| 858 |
|
| 859 |
|
| 860 |
|
| 861 | swap_buf_le16(dev->id, ATA_ID_WORDS);
|
| 862 | status = acpi_evaluate_object(ata_dev_acpi_handle(dev), "_SDD", &input,
|
| 863 | NULL);
|
| 864 | swap_buf_le16(dev->id, ATA_ID_WORDS);
|
| 865 |
|
| 866 | if (status == AE_NOT_FOUND)
|
| 867 | return -ENOENT;
|
| 868 |
|
| 869 | if (ACPI_FAILURE(status)) {
|
| 870 | ata_dev_warn(dev, "ACPI _SDD failed (AE 0x%x)\n", status);
|
| 871 | return -EIO;
|
| 872 | }
|
| 873 |
|
| 874 | return 0;
|
| 875 | }
|
| 876 |
|
| 877 | |
| 878 | * ata_acpi_on_resume - ATA ACPI hook called on resume
|
| 879 | * @ap: target ATA port
|
| 880 | *
|
| 881 | * This function is called when @ap is resumed - right after port
|
| 882 | * itself is resumed but before any EH action is taken.
|
| 883 | *
|
| 884 | * LOCKING:
|
| 885 | * EH context.
|
| 886 |
|
| 887 | void ata_acpi_on_resume(struct ata_port *ap)
|
| 888 | {
|
| 889 | const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap);
|
| 890 | struct ata_device *dev;
|
| 891 |
|
| 892 | if (ACPI_HANDLE(&ap->tdev) && gtm) {
|
| 893 |
|
| 894 |
|
| 895 |
|
| 896 | ata_acpi_stm(ap, gtm);
|
| 897 |
|
| 898 | |
| 899 | * use values set by _STM. Cache _GTF result and
|
| 900 | * schedule _GTF.
|
| 901 |
|
| 902 | ata_for_each_dev(dev, &ap->link, ALL) {
|
| 903 | ata_acpi_clear_gtf(dev);
|
| 904 | if (ata_dev_enabled(dev) &&
|
| 905 | ata_dev_acpi_handle(dev) &&
|
| 906 | ata_dev_get_GTF(dev, NULL) >= 0)
|
| 907 | dev->flags |= ATA_DFLAG_ACPI_PENDING;
|
| 908 | }
|
| 909 | } else {
|
| 910 | |
| 911 | * there's no reason to evaluate IDE _GTF early
|
| 912 | * without _STM. Clear cache and schedule _GTF.
|
| 913 |
|
| 914 | ata_for_each_dev(dev, &ap->link, ALL) {
|
| 915 | ata_acpi_clear_gtf(dev);
|
| 916 | if (ata_dev_enabled(dev))
|
| 917 | dev->flags |= ATA_DFLAG_ACPI_PENDING;
|
| 918 | }
|
| 919 | }
|
| 920 | }
|
| 921 |
|
| 922 | static int ata_acpi_choose_suspend_state(struct ata_device *dev, bool runtime)
|
| 923 | {
|
| 924 | int d_max_in = ACPI_STATE_D3_COLD;
|
| 925 | if (!runtime)
|
| 926 | goto out;
|
| 927 |
|
| 928 | |
| 929 | * For ATAPI, runtime D3 cold is only allowed
|
| 930 | * for ZPODD in zero power ready state
|
| 931 |
|
| 932 | if (dev->class == ATA_DEV_ATAPI &&
|
| 933 | !(zpodd_dev_enabled(dev) && zpodd_zpready(dev)))
|
| 934 | d_max_in = ACPI_STATE_D3_HOT;
|
| 935 |
|
| 936 | out:
|
| 937 | return acpi_pm_device_sleep_state(&dev->tdev, NULL, d_max_in);
|
| 938 | }
|
| 939 |
|
| 940 | static void sata_acpi_set_state(struct ata_port *ap, pm_message_t state)
|
| 941 | {
|
| 942 | bool runtime = PMSG_IS_AUTO(state);
|
| 943 | struct ata_device *dev;
|
| 944 | acpi_handle handle;
|
| 945 | int acpi_state;
|
| 946 |
|
| 947 | ata_for_each_dev(dev, &ap->link, ENABLED) {
|
| 948 | handle = ata_dev_acpi_handle(dev);
|
| 949 | if (!handle)
|
| 950 | continue;
|
| 951 |
|
| 952 | if (!(state.event & PM_EVENT_RESUME)) {
|
| 953 | acpi_state = ata_acpi_choose_suspend_state(dev, runtime);
|
| 954 | if (acpi_state == ACPI_STATE_D0)
|
| 955 | continue;
|
| 956 | if (runtime && zpodd_dev_enabled(dev) &&
|
| 957 | acpi_state == ACPI_STATE_D3_COLD)
|
| 958 | zpodd_enable_run_wake(dev);
|
| 959 | acpi_bus_set_power(handle, acpi_state);
|
| 960 | } else {
|
| 961 | if (runtime && zpodd_dev_enabled(dev))
|
| 962 | zpodd_disable_run_wake(dev);
|
| 963 | acpi_bus_set_power(handle, ACPI_STATE_D0);
|
| 964 | }
|
| 965 | }
|
| 966 | }
|
| 967 |
|
| 968 |
|
| 969 | static void pata_acpi_set_state(struct ata_port *ap, pm_message_t state)
|
| 970 | {
|
| 971 | struct ata_device *dev;
|
| 972 | acpi_handle port_handle;
|
| 973 |
|
| 974 | port_handle = ACPI_HANDLE(&ap->tdev);
|
| 975 | if (!port_handle)
|
| 976 | return;
|
| 977 |
|
| 978 | |
| 979 | for power off
|
| 980 | if (state.event & PM_EVENT_RESUME)
|
| 981 | acpi_bus_set_power(port_handle, ACPI_STATE_D0);
|
| 982 |
|
| 983 | ata_for_each_dev(dev, &ap->link, ENABLED) {
|
| 984 | acpi_handle dev_handle = ata_dev_acpi_handle(dev);
|
| 985 | if (!dev_handle)
|
| 986 | continue;
|
| 987 |
|
| 988 | acpi_bus_set_power(dev_handle, state.event & PM_EVENT_RESUME ?
|
| 989 | ACPI_STATE_D0 : ACPI_STATE_D3_COLD);
|
| 990 | }
|
| 991 |
|
| 992 | if (!(state.event & PM_EVENT_RESUME))
|
| 993 | acpi_bus_set_power(port_handle, ACPI_STATE_D3_COLD);
|
| 994 | }
|
| 995 |
|
| 996 | |
| 997 | * ata_acpi_set_state - set the port power state
|
| 998 | * @ap: target ATA port
|
| 999 | * @state: state, on/off
|
| 1000 | *
|
| 1001 | * This function sets a proper ACPI D state for the device on
|
| 1002 | * system and runtime PM operations.
|
| 1003 |
|
| 1004 | void ata_acpi_set_state(struct ata_port *ap, pm_message_t state)
|
| 1005 | {
|
| 1006 | if (ap->flags & ATA_FLAG_ACPI_SATA)
|
| 1007 | sata_acpi_set_state(ap, state);
|
| 1008 | else
|
| 1009 | pata_acpi_set_state(ap, state);
|
| 1010 | }
|
| 1011 |
|
| 1012 | |
| 1013 | * ata_acpi_on_devcfg - ATA ACPI hook called on device donfiguration
|
| 1014 | * @dev: target ATA device
|
| 1015 | *
|
| 1016 | * This function is called when @dev is about to be configured.
|
| 1017 | * IDENTIFY data might have been modified after this hook is run.
|
| 1018 | *
|
| 1019 | * LOCKING:
|
| 1020 | * EH context.
|
| 1021 | *
|
| 1022 | * RETURNS:
|
| 1023 | * Positive number if IDENTIFY data needs to be refreshed, 0 if not,
|
| 1024 | * -errno on failure.
|
| 1025 |
|
| 1026 | int ata_acpi_on_devcfg(struct ata_device *dev)
|
| 1027 | {
|
| 1028 | struct ata_port *ap = dev->link->ap;
|
| 1029 | struct ata_eh_context *ehc = &ap->link.eh_context;
|
| 1030 | int acpi_sata = ap->flags & ATA_FLAG_ACPI_SATA;
|
| 1031 | int nr_executed = 0;
|
| 1032 | int rc;
|
| 1033 |
|
| 1034 | if (!ata_dev_acpi_handle(dev))
|
| 1035 | return 0;
|
| 1036 |
|
| 1037 |
|
| 1038 | if (!(dev->flags & ATA_DFLAG_ACPI_PENDING) &&
|
| 1039 | !(acpi_sata && (ehc->i.flags & ATA_EHI_DID_HARDRESET)))
|
| 1040 | return 0;
|
| 1041 |
|
| 1042 |
|
| 1043 | if (acpi_sata) {
|
| 1044 | rc = ata_acpi_push_id(dev);
|
| 1045 | if (rc && rc != -ENOENT)
|
| 1046 | goto acpi_err;
|
| 1047 | }
|
| 1048 |
|
| 1049 |
|
| 1050 | rc = ata_acpi_exec_tfs(dev, &nr_executed);
|
| 1051 | if (rc)
|
| 1052 | goto acpi_err;
|
| 1053 |
|
| 1054 | dev->flags &= ~ATA_DFLAG_ACPI_PENDING;
|
| 1055 |
|
| 1056 |
|
| 1057 | if (nr_executed) {
|
| 1058 | rc = ata_dev_reread_id(dev, 0);
|
| 1059 | if (rc < 0) {
|
| 1060 | ata_dev_err(dev,
|
| 1061 | "failed to IDENTIFY after ACPI commands\n");
|
| 1062 | return rc;
|
| 1063 | }
|
| 1064 | }
|
| 1065 |
|
| 1066 | return 0;
|
| 1067 |
|
| 1068 | acpi_err:
|
| 1069 |
|
| 1070 | if (rc == -EINVAL && !nr_executed && !ata_port_is_frozen(ap))
|
| 1071 | return 0;
|
| 1072 |
|
| 1073 |
|
| 1074 | if (!(dev->flags & ATA_DFLAG_ACPI_FAILED)) {
|
| 1075 | dev->flags |= ATA_DFLAG_ACPI_FAILED;
|
| 1076 | return rc;
|
| 1077 | }
|
| 1078 |
|
| 1079 | dev->flags |= ATA_DFLAG_ACPI_DISABLED;
|
| 1080 | ata_dev_warn(dev, "ACPI: failed the second time, disabled\n");
|
| 1081 |
|
| 1082 | |
| 1083 | * and port is not frozen.
|
| 1084 |
|
| 1085 | if (!nr_executed && !ata_port_is_frozen(ap))
|
| 1086 | return 0;
|
| 1087 |
|
| 1088 | return rc;
|
| 1089 | }
|
| 1090 |
|
| 1091 | |
| 1092 | * ata_acpi_on_disable - ATA ACPI hook called when a device is disabled
|
| 1093 | * @dev: target ATA device
|
| 1094 | *
|
| 1095 | * This function is called when @dev is about to be disabled.
|
| 1096 | *
|
| 1097 | * LOCKING:
|
| 1098 | * EH context.
|
| 1099 |
|
| 1100 | void ata_acpi_on_disable(struct ata_device *dev)
|
| 1101 | {
|
| 1102 | ata_acpi_clear_gtf(dev);
|
| 1103 | }
|