| 1 | |
| 2 | |
| 3 | |
| 4 | |
| 5 | |
| 6 | |
| 7 | |
| 8 |
|
| 9 | #include <linux/extcon-provider.h>
|
| 10 | #include <linux/i2c.h>
|
| 11 | #include <linux/interrupt.h>
|
| 12 | #include <linux/kernel.h>
|
| 13 | #include <linux/mfd/max77693-common.h>
|
| 14 | #include <linux/mfd/max77843-private.h>
|
| 15 | #include <linux/module.h>
|
| 16 | #include <linux/platform_device.h>
|
| 17 | #include <linux/workqueue.h>
|
| 18 |
|
| 19 | #define DELAY_MS_DEFAULT 15000
|
| 20 |
|
| 21 | enum max77843_muic_status {
|
| 22 | MAX77843_MUIC_STATUS1 = 0,
|
| 23 | MAX77843_MUIC_STATUS2,
|
| 24 | MAX77843_MUIC_STATUS3,
|
| 25 |
|
| 26 | MAX77843_MUIC_STATUS_NUM,
|
| 27 | };
|
| 28 |
|
| 29 | struct max77843_muic_info {
|
| 30 | struct device *dev;
|
| 31 | struct max77693_dev *max77843;
|
| 32 | struct extcon_dev *edev;
|
| 33 |
|
| 34 | struct mutex mutex;
|
| 35 | struct work_struct irq_work;
|
| 36 | struct delayed_work wq_detcable;
|
| 37 |
|
| 38 | u8 status[MAX77843_MUIC_STATUS_NUM];
|
| 39 | int prev_cable_type;
|
| 40 | int prev_chg_type;
|
| 41 | int prev_gnd_type;
|
| 42 |
|
| 43 | bool irq_adc;
|
| 44 | bool irq_chg;
|
| 45 | };
|
| 46 |
|
| 47 | enum max77843_muic_cable_group {
|
| 48 | MAX77843_CABLE_GROUP_ADC = 0,
|
| 49 | MAX77843_CABLE_GROUP_ADC_GND,
|
| 50 | MAX77843_CABLE_GROUP_CHG,
|
| 51 | };
|
| 52 |
|
| 53 | enum max77843_muic_adc_debounce_time {
|
| 54 | MAX77843_DEBOUNCE_TIME_5MS = 0,
|
| 55 | MAX77843_DEBOUNCE_TIME_10MS,
|
| 56 | MAX77843_DEBOUNCE_TIME_25MS,
|
| 57 | MAX77843_DEBOUNCE_TIME_38_62MS,
|
| 58 | };
|
| 59 |
|
| 60 |
|
| 61 | enum max77843_muic_accessory_type {
|
| 62 | MAX77843_MUIC_ADC_GROUND = 0,
|
| 63 | MAX77843_MUIC_ADC_SEND_END_BUTTON,
|
| 64 | MAX77843_MUIC_ADC_REMOTE_S1_BUTTON,
|
| 65 | MAX77843_MUIC_ADC_REMOTE_S2_BUTTON,
|
| 66 | MAX77843_MUIC_ADC_REMOTE_S3_BUTTON,
|
| 67 | MAX77843_MUIC_ADC_REMOTE_S4_BUTTON,
|
| 68 | MAX77843_MUIC_ADC_REMOTE_S5_BUTTON,
|
| 69 | MAX77843_MUIC_ADC_REMOTE_S6_BUTTON,
|
| 70 | MAX77843_MUIC_ADC_REMOTE_S7_BUTTON,
|
| 71 | MAX77843_MUIC_ADC_REMOTE_S8_BUTTON,
|
| 72 | MAX77843_MUIC_ADC_REMOTE_S9_BUTTON,
|
| 73 | MAX77843_MUIC_ADC_REMOTE_S10_BUTTON,
|
| 74 | MAX77843_MUIC_ADC_REMOTE_S11_BUTTON,
|
| 75 | MAX77843_MUIC_ADC_REMOTE_S12_BUTTON,
|
| 76 | MAX77843_MUIC_ADC_RESERVED_ACC_1,
|
| 77 | MAX77843_MUIC_ADC_RESERVED_ACC_2,
|
| 78 | MAX77843_MUIC_ADC_RESERVED_ACC_3,
|
| 79 | MAX77843_MUIC_ADC_RESERVED_ACC_4,
|
| 80 | MAX77843_MUIC_ADC_RESERVED_ACC_5,
|
| 81 | MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2,
|
| 82 | MAX77843_MUIC_ADC_PHONE_POWERED_DEV,
|
| 83 | MAX77843_MUIC_ADC_TTY_CONVERTER,
|
| 84 | MAX77843_MUIC_ADC_UART_CABLE,
|
| 85 | MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG,
|
| 86 | MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF,
|
| 87 | MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON,
|
| 88 | MAX77843_MUIC_ADC_AV_CABLE_NOLOAD,
|
| 89 | MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG,
|
| 90 | MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF,
|
| 91 | MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON,
|
| 92 | MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1,
|
| 93 | MAX77843_MUIC_ADC_OPEN,
|
| 94 |
|
| 95 | |
| 96 | * The below accessories should check
|
| 97 | * not only ADC value but also ADC1K and VBVolt value.
|
| 98 |
|
| 99 |
|
| 100 | MAX77843_MUIC_GND_USB_HOST = 0x100,
|
| 101 | MAX77843_MUIC_GND_USB_HOST_VB = 0x101,
|
| 102 | MAX77843_MUIC_GND_MHL = 0x102,
|
| 103 | MAX77843_MUIC_GND_MHL_VB = 0x103,
|
| 104 | };
|
| 105 |
|
| 106 |
|
| 107 | enum max77843_muic_charger_type {
|
| 108 | MAX77843_MUIC_CHG_NONE = 0,
|
| 109 | MAX77843_MUIC_CHG_USB,
|
| 110 | MAX77843_MUIC_CHG_DOWNSTREAM,
|
| 111 | MAX77843_MUIC_CHG_DEDICATED,
|
| 112 | MAX77843_MUIC_CHG_SPECIAL_500MA,
|
| 113 | MAX77843_MUIC_CHG_SPECIAL_1A,
|
| 114 | MAX77843_MUIC_CHG_SPECIAL_BIAS,
|
| 115 | MAX77843_MUIC_CHG_RESERVED,
|
| 116 | MAX77843_MUIC_CHG_GND,
|
| 117 | MAX77843_MUIC_CHG_DOCK,
|
| 118 | };
|
| 119 |
|
| 120 | static const unsigned int max77843_extcon_cable[] = {
|
| 121 | EXTCON_USB,
|
| 122 | EXTCON_USB_HOST,
|
| 123 | EXTCON_CHG_USB_SDP,
|
| 124 | EXTCON_CHG_USB_DCP,
|
| 125 | EXTCON_CHG_USB_CDP,
|
| 126 | EXTCON_CHG_USB_FAST,
|
| 127 | EXTCON_CHG_USB_SLOW,
|
| 128 | EXTCON_DISP_MHL,
|
| 129 | EXTCON_DOCK,
|
| 130 | EXTCON_JIG,
|
| 131 | EXTCON_NONE,
|
| 132 | };
|
| 133 |
|
| 134 | struct max77843_muic_irq {
|
| 135 | unsigned int irq;
|
| 136 | const char *name;
|
| 137 | unsigned int virq;
|
| 138 | };
|
| 139 |
|
| 140 | static struct max77843_muic_irq max77843_muic_irqs[] = {
|
| 141 | { MAX77843_MUIC_IRQ_INT1_ADC, "MUIC-ADC" },
|
| 142 | { MAX77843_MUIC_IRQ_INT1_ADCERROR, "MUIC-ADC_ERROR" },
|
| 143 | { MAX77843_MUIC_IRQ_INT1_ADC1K, "MUIC-ADC1K" },
|
| 144 | { MAX77843_MUIC_IRQ_INT2_CHGTYP, "MUIC-CHGTYP" },
|
| 145 | { MAX77843_MUIC_IRQ_INT2_CHGDETRUN, "MUIC-CHGDETRUN" },
|
| 146 | { MAX77843_MUIC_IRQ_INT2_DCDTMR, "MUIC-DCDTMR" },
|
| 147 | { MAX77843_MUIC_IRQ_INT2_DXOVP, "MUIC-DXOVP" },
|
| 148 | { MAX77843_MUIC_IRQ_INT2_VBVOLT, "MUIC-VBVOLT" },
|
| 149 | { MAX77843_MUIC_IRQ_INT3_VBADC, "MUIC-VBADC" },
|
| 150 | { MAX77843_MUIC_IRQ_INT3_VDNMON, "MUIC-VDNMON" },
|
| 151 | { MAX77843_MUIC_IRQ_INT3_DNRES, "MUIC-DNRES" },
|
| 152 | { MAX77843_MUIC_IRQ_INT3_MPNACK, "MUIC-MPNACK"},
|
| 153 | { MAX77843_MUIC_IRQ_INT3_MRXBUFOW, "MUIC-MRXBUFOW"},
|
| 154 | { MAX77843_MUIC_IRQ_INT3_MRXTRF, "MUIC-MRXTRF"},
|
| 155 | { MAX77843_MUIC_IRQ_INT3_MRXPERR, "MUIC-MRXPERR"},
|
| 156 | { MAX77843_MUIC_IRQ_INT3_MRXRDY, "MUIC-MRXRDY"},
|
| 157 | };
|
| 158 |
|
| 159 | static const struct regmap_config max77843_muic_regmap_config = {
|
| 160 | .reg_bits = 8,
|
| 161 | .val_bits = 8,
|
| 162 | .max_register = MAX77843_MUIC_REG_END,
|
| 163 | };
|
| 164 |
|
| 165 | static const struct regmap_irq max77843_muic_irq[] = {
|
| 166 |
|
| 167 | { .reg_offset = 0, .mask = MAX77843_MUIC_ADC, },
|
| 168 | { .reg_offset = 0, .mask = MAX77843_MUIC_ADCERROR, },
|
| 169 | { .reg_offset = 0, .mask = MAX77843_MUIC_ADC1K, },
|
| 170 |
|
| 171 |
|
| 172 | { .reg_offset = 1, .mask = MAX77843_MUIC_CHGTYP, },
|
| 173 | { .reg_offset = 1, .mask = MAX77843_MUIC_CHGDETRUN, },
|
| 174 | { .reg_offset = 1, .mask = MAX77843_MUIC_DCDTMR, },
|
| 175 | { .reg_offset = 1, .mask = MAX77843_MUIC_DXOVP, },
|
| 176 | { .reg_offset = 1, .mask = MAX77843_MUIC_VBVOLT, },
|
| 177 |
|
| 178 |
|
| 179 | { .reg_offset = 2, .mask = MAX77843_MUIC_VBADC, },
|
| 180 | { .reg_offset = 2, .mask = MAX77843_MUIC_VDNMON, },
|
| 181 | { .reg_offset = 2, .mask = MAX77843_MUIC_DNRES, },
|
| 182 | { .reg_offset = 2, .mask = MAX77843_MUIC_MPNACK, },
|
| 183 | { .reg_offset = 2, .mask = MAX77843_MUIC_MRXBUFOW, },
|
| 184 | { .reg_offset = 2, .mask = MAX77843_MUIC_MRXTRF, },
|
| 185 | { .reg_offset = 2, .mask = MAX77843_MUIC_MRXPERR, },
|
| 186 | { .reg_offset = 2, .mask = MAX77843_MUIC_MRXRDY, },
|
| 187 | };
|
| 188 |
|
| 189 | static const struct regmap_irq_chip max77843_muic_irq_chip = {
|
| 190 | .name = "max77843-muic",
|
| 191 | .status_base = MAX77843_MUIC_REG_INT1,
|
| 192 | .unmask_base = MAX77843_MUIC_REG_INTMASK1,
|
| 193 | .num_regs = 3,
|
| 194 | .irqs = max77843_muic_irq,
|
| 195 | .num_irqs = ARRAY_SIZE(max77843_muic_irq),
|
| 196 | };
|
| 197 |
|
| 198 | static int max77843_muic_set_path(struct max77843_muic_info *info,
|
| 199 | u8 val, bool attached, bool nobccomp)
|
| 200 | {
|
| 201 | struct max77693_dev *max77843 = info->max77843;
|
| 202 | int ret = 0;
|
| 203 | unsigned int ctrl1, ctrl2;
|
| 204 |
|
| 205 | if (attached)
|
| 206 | ctrl1 = val;
|
| 207 | else
|
| 208 | ctrl1 = MAX77843_MUIC_CONTROL1_SW_OPEN;
|
| 209 | if (nobccomp) {
|
| 210 |
|
| 211 | ctrl1 |= MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK;
|
| 212 | }
|
| 213 |
|
| 214 | ret = regmap_update_bits(max77843->regmap_muic,
|
| 215 | MAX77843_MUIC_REG_CONTROL1,
|
| 216 | MAX77843_MUIC_CONTROL1_COM_SW |
|
| 217 | MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK,
|
| 218 | ctrl1);
|
| 219 | if (ret < 0) {
|
| 220 | dev_err(info->dev, "Cannot switch MUIC port\n");
|
| 221 | return ret;
|
| 222 | }
|
| 223 |
|
| 224 | if (attached)
|
| 225 | ctrl2 = MAX77843_MUIC_CONTROL2_CPEN_MASK;
|
| 226 | else
|
| 227 | ctrl2 = MAX77843_MUIC_CONTROL2_LOWPWR_MASK;
|
| 228 |
|
| 229 | ret = regmap_update_bits(max77843->regmap_muic,
|
| 230 | MAX77843_MUIC_REG_CONTROL2,
|
| 231 | MAX77843_MUIC_CONTROL2_LOWPWR_MASK |
|
| 232 | MAX77843_MUIC_CONTROL2_CPEN_MASK, ctrl2);
|
| 233 | if (ret < 0) {
|
| 234 | dev_err(info->dev, "Cannot update lowpower mode\n");
|
| 235 | return ret;
|
| 236 | }
|
| 237 |
|
| 238 | dev_dbg(info->dev,
|
| 239 | "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n",
|
| 240 | ctrl1, ctrl2, attached ? "attached" : "detached");
|
| 241 |
|
| 242 | return 0;
|
| 243 | }
|
| 244 |
|
| 245 | static void max77843_charger_set_otg_vbus(struct max77843_muic_info *info,
|
| 246 | bool on)
|
| 247 | {
|
| 248 | struct max77693_dev *max77843 = info->max77843;
|
| 249 | unsigned int cnfg00;
|
| 250 |
|
| 251 | if (on)
|
| 252 | cnfg00 = MAX77843_CHG_OTG_MASK | MAX77843_CHG_BOOST_MASK;
|
| 253 | else
|
| 254 | cnfg00 = MAX77843_CHG_ENABLE | MAX77843_CHG_BUCK_MASK;
|
| 255 |
|
| 256 | regmap_update_bits(max77843->regmap_chg, MAX77843_CHG_REG_CHG_CNFG_00,
|
| 257 | MAX77843_CHG_MODE_MASK, cnfg00);
|
| 258 | }
|
| 259 |
|
| 260 | static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
|
| 261 | enum max77843_muic_cable_group group, bool *attached)
|
| 262 | {
|
| 263 | int adc, chg_type, cable_type, gnd_type;
|
| 264 |
|
| 265 | adc = info->status[MAX77843_MUIC_STATUS1] &
|
| 266 | MAX77843_MUIC_STATUS1_ADC_MASK;
|
| 267 | adc >>= MAX77843_MUIC_STATUS1_ADC_SHIFT;
|
| 268 |
|
| 269 | switch (group) {
|
| 270 | case MAX77843_CABLE_GROUP_ADC:
|
| 271 | if (adc == MAX77843_MUIC_ADC_OPEN) {
|
| 272 | *attached = false;
|
| 273 | cable_type = info->prev_cable_type;
|
| 274 | info->prev_cable_type = MAX77843_MUIC_ADC_OPEN;
|
| 275 | } else {
|
| 276 | *attached = true;
|
| 277 | cable_type = info->prev_cable_type = adc;
|
| 278 | }
|
| 279 | break;
|
| 280 | case MAX77843_CABLE_GROUP_CHG:
|
| 281 | chg_type = info->status[MAX77843_MUIC_STATUS2] &
|
| 282 | MAX77843_MUIC_STATUS2_CHGTYP_MASK;
|
| 283 |
|
| 284 |
|
| 285 | if (adc == MAX77843_MUIC_ADC_GROUND) {
|
| 286 | if (chg_type == MAX77843_MUIC_CHG_NONE) {
|
| 287 | |
| 288 | * The following state when charger cable is
|
| 289 | * disconnected but the GROUND accessory still
|
| 290 | * connected.
|
| 291 |
|
| 292 | *attached = false;
|
| 293 | cable_type = info->prev_chg_type;
|
| 294 | info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
|
| 295 | } else {
|
| 296 |
|
| 297 | |
| 298 | * The following state when charger cable is
|
| 299 | * connected on the GROUND accessory.
|
| 300 |
|
| 301 | *attached = true;
|
| 302 | cable_type = MAX77843_MUIC_CHG_GND;
|
| 303 | info->prev_chg_type = MAX77843_MUIC_CHG_GND;
|
| 304 | }
|
| 305 | break;
|
| 306 | }
|
| 307 |
|
| 308 | if (adc == MAX77843_MUIC_ADC_RESERVED_ACC_3) {
|
| 309 | if (chg_type == MAX77843_MUIC_CHG_NONE) {
|
| 310 | *attached = false;
|
| 311 | cable_type = info->prev_chg_type;
|
| 312 | info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
|
| 313 | } else {
|
| 314 | *attached = true;
|
| 315 | cable_type = MAX77843_MUIC_CHG_DOCK;
|
| 316 | info->prev_chg_type = MAX77843_MUIC_CHG_DOCK;
|
| 317 | }
|
| 318 | break;
|
| 319 | }
|
| 320 |
|
| 321 | if (chg_type == MAX77843_MUIC_CHG_NONE) {
|
| 322 | *attached = false;
|
| 323 | cable_type = info->prev_chg_type;
|
| 324 | info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
|
| 325 | } else {
|
| 326 | *attached = true;
|
| 327 | cable_type = info->prev_chg_type = chg_type;
|
| 328 | }
|
| 329 | break;
|
| 330 | case MAX77843_CABLE_GROUP_ADC_GND:
|
| 331 | if (adc == MAX77843_MUIC_ADC_OPEN) {
|
| 332 | *attached = false;
|
| 333 | cable_type = info->prev_gnd_type;
|
| 334 | info->prev_gnd_type = MAX77843_MUIC_ADC_OPEN;
|
| 335 | } else {
|
| 336 | *attached = true;
|
| 337 |
|
| 338 | |
| 339 | * Offset|ADC1K|VBVolt|
|
| 340 | * 0x1| 0| 0| USB-HOST
|
| 341 | * 0x1| 0| 1| USB-HOST with VB
|
| 342 | * 0x1| 1| 0| MHL
|
| 343 | * 0x1| 1| 1| MHL with VB
|
| 344 |
|
| 345 |
|
| 346 | gnd_type = (info->status[MAX77843_MUIC_STATUS1] &
|
| 347 | MAX77843_MUIC_STATUS1_ADC1K_MASK);
|
| 348 |
|
| 349 |
|
| 350 | gnd_type |= (info->status[MAX77843_MUIC_STATUS2] &
|
| 351 | MAX77843_MUIC_STATUS2_VBVOLT_MASK);
|
| 352 | gnd_type >>= MAX77843_MUIC_STATUS2_VBVOLT_SHIFT;
|
| 353 |
|
| 354 |
|
| 355 | gnd_type |= MAX77843_MUIC_GND_USB_HOST;
|
| 356 | cable_type = info->prev_gnd_type = gnd_type;
|
| 357 | }
|
| 358 | break;
|
| 359 | default:
|
| 360 | dev_err(info->dev, "Unknown cable group (%d)\n", group);
|
| 361 | cable_type = -EINVAL;
|
| 362 | break;
|
| 363 | }
|
| 364 |
|
| 365 | return cable_type;
|
| 366 | }
|
| 367 |
|
| 368 | static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
|
| 369 | {
|
| 370 | int ret, gnd_cable_type;
|
| 371 | bool attached;
|
| 372 |
|
| 373 | gnd_cable_type = max77843_muic_get_cable_type(info,
|
| 374 | MAX77843_CABLE_GROUP_ADC_GND, &attached);
|
| 375 | dev_dbg(info->dev, "external connector is %s (gnd:0x%02x)\n",
|
| 376 | attached ? "attached" : "detached", gnd_cable_type);
|
| 377 |
|
| 378 | switch (gnd_cable_type) {
|
| 379 | case MAX77843_MUIC_GND_USB_HOST:
|
| 380 | case MAX77843_MUIC_GND_USB_HOST_VB:
|
| 381 | ret = max77843_muic_set_path(info,
|
| 382 | MAX77843_MUIC_CONTROL1_SW_USB,
|
| 383 | attached, false);
|
| 384 | if (ret < 0)
|
| 385 | return ret;
|
| 386 |
|
| 387 | extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
|
| 388 | max77843_charger_set_otg_vbus(info, attached);
|
| 389 | break;
|
| 390 | case MAX77843_MUIC_GND_MHL_VB:
|
| 391 | case MAX77843_MUIC_GND_MHL:
|
| 392 | ret = max77843_muic_set_path(info,
|
| 393 | MAX77843_MUIC_CONTROL1_SW_OPEN,
|
| 394 | attached, false);
|
| 395 | if (ret < 0)
|
| 396 | return ret;
|
| 397 |
|
| 398 | extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
|
| 399 | break;
|
| 400 | default:
|
| 401 | dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n",
|
| 402 | attached ? "attached" : "detached", gnd_cable_type);
|
| 403 | return -EINVAL;
|
| 404 | }
|
| 405 |
|
| 406 | return 0;
|
| 407 | }
|
| 408 |
|
| 409 | static int max77843_muic_jig_handler(struct max77843_muic_info *info,
|
| 410 | int cable_type, bool attached)
|
| 411 | {
|
| 412 | int ret;
|
| 413 | u8 path = MAX77843_MUIC_CONTROL1_SW_OPEN;
|
| 414 |
|
| 415 | dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n",
|
| 416 | attached ? "attached" : "detached", cable_type);
|
| 417 |
|
| 418 | switch (cable_type) {
|
| 419 | case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
|
| 420 | case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
|
| 421 | path = MAX77843_MUIC_CONTROL1_SW_USB;
|
| 422 | break;
|
| 423 | case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
|
| 424 | path = MAX77843_MUIC_CONTROL1_SW_UART;
|
| 425 | break;
|
| 426 | default:
|
| 427 | return -EINVAL;
|
| 428 | }
|
| 429 |
|
| 430 | ret = max77843_muic_set_path(info, path, attached, false);
|
| 431 | if (ret < 0)
|
| 432 | return ret;
|
| 433 |
|
| 434 | extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
|
| 435 |
|
| 436 | return 0;
|
| 437 | }
|
| 438 |
|
| 439 | static int max77843_muic_dock_handler(struct max77843_muic_info *info,
|
| 440 | bool attached)
|
| 441 | {
|
| 442 | int ret;
|
| 443 |
|
| 444 | dev_dbg(info->dev, "external connector is %s (adc: 0x10)\n",
|
| 445 | attached ? "attached" : "detached");
|
| 446 |
|
| 447 | ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_USB,
|
| 448 | attached, attached);
|
| 449 | if (ret < 0)
|
| 450 | return ret;
|
| 451 |
|
| 452 | extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
|
| 453 | extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
|
| 454 | extcon_set_state_sync(info->edev, EXTCON_DOCK, attached);
|
| 455 |
|
| 456 | return 0;
|
| 457 | }
|
| 458 |
|
| 459 | static int max77843_muic_adc_handler(struct max77843_muic_info *info)
|
| 460 | {
|
| 461 | int ret, cable_type;
|
| 462 | bool attached;
|
| 463 |
|
| 464 | cable_type = max77843_muic_get_cable_type(info,
|
| 465 | MAX77843_CABLE_GROUP_ADC, &attached);
|
| 466 |
|
| 467 | dev_dbg(info->dev,
|
| 468 | "external connector is %s (adc:0x%02x, prev_adc:0x%x)\n",
|
| 469 | attached ? "attached" : "detached", cable_type,
|
| 470 | info->prev_cable_type);
|
| 471 |
|
| 472 | switch (cable_type) {
|
| 473 | case MAX77843_MUIC_ADC_RESERVED_ACC_3:
|
| 474 | ret = max77843_muic_dock_handler(info, attached);
|
| 475 | if (ret < 0)
|
| 476 | return ret;
|
| 477 | break;
|
| 478 | case MAX77843_MUIC_ADC_GROUND:
|
| 479 | ret = max77843_muic_adc_gnd_handler(info);
|
| 480 | if (ret < 0)
|
| 481 | return ret;
|
| 482 | break;
|
| 483 | case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
|
| 484 | case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
|
| 485 | case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
|
| 486 | ret = max77843_muic_jig_handler(info, cable_type, attached);
|
| 487 | if (ret < 0)
|
| 488 | return ret;
|
| 489 | break;
|
| 490 | case MAX77843_MUIC_ADC_SEND_END_BUTTON:
|
| 491 | case MAX77843_MUIC_ADC_REMOTE_S1_BUTTON:
|
| 492 | case MAX77843_MUIC_ADC_REMOTE_S2_BUTTON:
|
| 493 | case MAX77843_MUIC_ADC_REMOTE_S3_BUTTON:
|
| 494 | case MAX77843_MUIC_ADC_REMOTE_S4_BUTTON:
|
| 495 | case MAX77843_MUIC_ADC_REMOTE_S5_BUTTON:
|
| 496 | case MAX77843_MUIC_ADC_REMOTE_S6_BUTTON:
|
| 497 | case MAX77843_MUIC_ADC_REMOTE_S7_BUTTON:
|
| 498 | case MAX77843_MUIC_ADC_REMOTE_S8_BUTTON:
|
| 499 | case MAX77843_MUIC_ADC_REMOTE_S9_BUTTON:
|
| 500 | case MAX77843_MUIC_ADC_REMOTE_S10_BUTTON:
|
| 501 | case MAX77843_MUIC_ADC_REMOTE_S11_BUTTON:
|
| 502 | case MAX77843_MUIC_ADC_REMOTE_S12_BUTTON:
|
| 503 | case MAX77843_MUIC_ADC_RESERVED_ACC_1:
|
| 504 | case MAX77843_MUIC_ADC_RESERVED_ACC_2:
|
| 505 | case MAX77843_MUIC_ADC_RESERVED_ACC_4:
|
| 506 | case MAX77843_MUIC_ADC_RESERVED_ACC_5:
|
| 507 | case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2:
|
| 508 | case MAX77843_MUIC_ADC_PHONE_POWERED_DEV:
|
| 509 | case MAX77843_MUIC_ADC_TTY_CONVERTER:
|
| 510 | case MAX77843_MUIC_ADC_UART_CABLE:
|
| 511 | case MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG:
|
| 512 | case MAX77843_MUIC_ADC_AV_CABLE_NOLOAD:
|
| 513 | case MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG:
|
| 514 | case MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON:
|
| 515 | case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1:
|
| 516 | case MAX77843_MUIC_ADC_OPEN:
|
| 517 | dev_err(info->dev,
|
| 518 | "accessory is %s but it isn't used (adc:0x%x)\n",
|
| 519 | attached ? "attached" : "detached", cable_type);
|
| 520 | return -EAGAIN;
|
| 521 | default:
|
| 522 | dev_err(info->dev,
|
| 523 | "failed to detect %s accessory (adc:0x%x)\n",
|
| 524 | attached ? "attached" : "detached", cable_type);
|
| 525 | return -EINVAL;
|
| 526 | }
|
| 527 |
|
| 528 | return 0;
|
| 529 | }
|
| 530 |
|
| 531 | static int max77843_muic_chg_handler(struct max77843_muic_info *info)
|
| 532 | {
|
| 533 | int ret, chg_type, gnd_type;
|
| 534 | bool attached;
|
| 535 |
|
| 536 | chg_type = max77843_muic_get_cable_type(info,
|
| 537 | MAX77843_CABLE_GROUP_CHG, &attached);
|
| 538 |
|
| 539 | dev_dbg(info->dev,
|
| 540 | "external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n",
|
| 541 | attached ? "attached" : "detached",
|
| 542 | chg_type, info->prev_chg_type);
|
| 543 |
|
| 544 | switch (chg_type) {
|
| 545 | case MAX77843_MUIC_CHG_USB:
|
| 546 | ret = max77843_muic_set_path(info,
|
| 547 | MAX77843_MUIC_CONTROL1_SW_USB,
|
| 548 | attached, false);
|
| 549 | if (ret < 0)
|
| 550 | return ret;
|
| 551 |
|
| 552 | extcon_set_state_sync(info->edev, EXTCON_USB, attached);
|
| 553 | extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
|
| 554 | attached);
|
| 555 | break;
|
| 556 | case MAX77843_MUIC_CHG_DOWNSTREAM:
|
| 557 | ret = max77843_muic_set_path(info,
|
| 558 | MAX77843_MUIC_CONTROL1_SW_OPEN,
|
| 559 | attached, false);
|
| 560 | if (ret < 0)
|
| 561 | return ret;
|
| 562 |
|
| 563 | extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
|
| 564 | attached);
|
| 565 | break;
|
| 566 | case MAX77843_MUIC_CHG_DEDICATED:
|
| 567 | ret = max77843_muic_set_path(info,
|
| 568 | MAX77843_MUIC_CONTROL1_SW_OPEN,
|
| 569 | attached, false);
|
| 570 | if (ret < 0)
|
| 571 | return ret;
|
| 572 |
|
| 573 | extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
|
| 574 | attached);
|
| 575 | break;
|
| 576 | case MAX77843_MUIC_CHG_SPECIAL_500MA:
|
| 577 | ret = max77843_muic_set_path(info,
|
| 578 | MAX77843_MUIC_CONTROL1_SW_OPEN,
|
| 579 | attached, false);
|
| 580 | if (ret < 0)
|
| 581 | return ret;
|
| 582 |
|
| 583 | extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
|
| 584 | attached);
|
| 585 | break;
|
| 586 | case MAX77843_MUIC_CHG_SPECIAL_1A:
|
| 587 | ret = max77843_muic_set_path(info,
|
| 588 | MAX77843_MUIC_CONTROL1_SW_OPEN,
|
| 589 | attached, false);
|
| 590 | if (ret < 0)
|
| 591 | return ret;
|
| 592 |
|
| 593 | extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
|
| 594 | attached);
|
| 595 | break;
|
| 596 | case MAX77843_MUIC_CHG_GND:
|
| 597 | gnd_type = max77843_muic_get_cable_type(info,
|
| 598 | MAX77843_CABLE_GROUP_ADC_GND, &attached);
|
| 599 |
|
| 600 |
|
| 601 | if (gnd_type == MAX77843_MUIC_GND_MHL_VB)
|
| 602 | extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
|
| 603 | true);
|
| 604 | else if (gnd_type == MAX77843_MUIC_GND_MHL)
|
| 605 | extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
|
| 606 | false);
|
| 607 | break;
|
| 608 | case MAX77843_MUIC_CHG_DOCK:
|
| 609 | extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, attached);
|
| 610 | break;
|
| 611 | case MAX77843_MUIC_CHG_NONE:
|
| 612 | break;
|
| 613 | default:
|
| 614 | dev_err(info->dev,
|
| 615 | "failed to detect %s accessory (chg_type:0x%x)\n",
|
| 616 | attached ? "attached" : "detached", chg_type);
|
| 617 |
|
| 618 | max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN,
|
| 619 | attached, false);
|
| 620 | return -EINVAL;
|
| 621 | }
|
| 622 |
|
| 623 | return 0;
|
| 624 | }
|
| 625 |
|
| 626 | static void max77843_muic_irq_work(struct work_struct *work)
|
| 627 | {
|
| 628 | struct max77843_muic_info *info = container_of(work,
|
| 629 | struct max77843_muic_info, irq_work);
|
| 630 | struct max77693_dev *max77843 = info->max77843;
|
| 631 | int ret = 0;
|
| 632 |
|
| 633 | mutex_lock(&info->mutex);
|
| 634 |
|
| 635 | ret = regmap_bulk_read(max77843->regmap_muic,
|
| 636 | MAX77843_MUIC_REG_STATUS1, info->status,
|
| 637 | MAX77843_MUIC_STATUS_NUM);
|
| 638 | if (ret) {
|
| 639 | dev_err(info->dev, "Cannot read STATUS registers\n");
|
| 640 | mutex_unlock(&info->mutex);
|
| 641 | return;
|
| 642 | }
|
| 643 |
|
| 644 | if (info->irq_adc) {
|
| 645 | ret = max77843_muic_adc_handler(info);
|
| 646 | if (ret)
|
| 647 | dev_err(info->dev, "Unknown cable type\n");
|
| 648 | info->irq_adc = false;
|
| 649 | }
|
| 650 |
|
| 651 | if (info->irq_chg) {
|
| 652 | ret = max77843_muic_chg_handler(info);
|
| 653 | if (ret)
|
| 654 | dev_err(info->dev, "Unknown charger type\n");
|
| 655 | info->irq_chg = false;
|
| 656 | }
|
| 657 |
|
| 658 | mutex_unlock(&info->mutex);
|
| 659 | }
|
| 660 |
|
| 661 | static irqreturn_t max77843_muic_irq_handler(int irq, void *data)
|
| 662 | {
|
| 663 | struct max77843_muic_info *info = data;
|
| 664 | int i, irq_type = -1;
|
| 665 |
|
| 666 | for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++)
|
| 667 | if (irq == max77843_muic_irqs[i].virq)
|
| 668 | irq_type = max77843_muic_irqs[i].irq;
|
| 669 |
|
| 670 | switch (irq_type) {
|
| 671 | case MAX77843_MUIC_IRQ_INT1_ADC:
|
| 672 | case MAX77843_MUIC_IRQ_INT1_ADCERROR:
|
| 673 | case MAX77843_MUIC_IRQ_INT1_ADC1K:
|
| 674 | info->irq_adc = true;
|
| 675 | break;
|
| 676 | case MAX77843_MUIC_IRQ_INT2_CHGTYP:
|
| 677 | case MAX77843_MUIC_IRQ_INT2_CHGDETRUN:
|
| 678 | case MAX77843_MUIC_IRQ_INT2_DCDTMR:
|
| 679 | case MAX77843_MUIC_IRQ_INT2_DXOVP:
|
| 680 | case MAX77843_MUIC_IRQ_INT2_VBVOLT:
|
| 681 | info->irq_chg = true;
|
| 682 | break;
|
| 683 | case MAX77843_MUIC_IRQ_INT3_VBADC:
|
| 684 | case MAX77843_MUIC_IRQ_INT3_VDNMON:
|
| 685 | case MAX77843_MUIC_IRQ_INT3_DNRES:
|
| 686 | case MAX77843_MUIC_IRQ_INT3_MPNACK:
|
| 687 | case MAX77843_MUIC_IRQ_INT3_MRXBUFOW:
|
| 688 | case MAX77843_MUIC_IRQ_INT3_MRXTRF:
|
| 689 | case MAX77843_MUIC_IRQ_INT3_MRXPERR:
|
| 690 | case MAX77843_MUIC_IRQ_INT3_MRXRDY:
|
| 691 | break;
|
| 692 | default:
|
| 693 | dev_err(info->dev, "Cannot recognize IRQ(%d)\n", irq_type);
|
| 694 | break;
|
| 695 | }
|
| 696 |
|
| 697 | schedule_work(&info->irq_work);
|
| 698 |
|
| 699 | return IRQ_HANDLED;
|
| 700 | }
|
| 701 |
|
| 702 | static void max77843_muic_detect_cable_wq(struct work_struct *work)
|
| 703 | {
|
| 704 | struct max77843_muic_info *info = container_of(to_delayed_work(work),
|
| 705 | struct max77843_muic_info, wq_detcable);
|
| 706 | struct max77693_dev *max77843 = info->max77843;
|
| 707 | int chg_type, adc, ret;
|
| 708 | bool attached;
|
| 709 |
|
| 710 | mutex_lock(&info->mutex);
|
| 711 |
|
| 712 | ret = regmap_bulk_read(max77843->regmap_muic,
|
| 713 | MAX77843_MUIC_REG_STATUS1, info->status,
|
| 714 | MAX77843_MUIC_STATUS_NUM);
|
| 715 | if (ret) {
|
| 716 | dev_err(info->dev, "Cannot read STATUS registers\n");
|
| 717 | goto err_cable_wq;
|
| 718 | }
|
| 719 |
|
| 720 | adc = max77843_muic_get_cable_type(info,
|
| 721 | MAX77843_CABLE_GROUP_ADC, &attached);
|
| 722 | if (attached && adc != MAX77843_MUIC_ADC_OPEN) {
|
| 723 | ret = max77843_muic_adc_handler(info);
|
| 724 | if (ret < 0) {
|
| 725 | dev_err(info->dev, "Cannot detect accessory\n");
|
| 726 | goto err_cable_wq;
|
| 727 | }
|
| 728 | }
|
| 729 |
|
| 730 | chg_type = max77843_muic_get_cable_type(info,
|
| 731 | MAX77843_CABLE_GROUP_CHG, &attached);
|
| 732 | if (attached && chg_type != MAX77843_MUIC_CHG_NONE) {
|
| 733 | ret = max77843_muic_chg_handler(info);
|
| 734 | if (ret < 0) {
|
| 735 | dev_err(info->dev, "Cannot detect charger accessory\n");
|
| 736 | goto err_cable_wq;
|
| 737 | }
|
| 738 | }
|
| 739 |
|
| 740 | err_cable_wq:
|
| 741 | mutex_unlock(&info->mutex);
|
| 742 | }
|
| 743 |
|
| 744 | static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
|
| 745 | enum max77843_muic_adc_debounce_time time)
|
| 746 | {
|
| 747 | struct max77693_dev *max77843 = info->max77843;
|
| 748 | int ret;
|
| 749 |
|
| 750 | switch (time) {
|
| 751 | case MAX77843_DEBOUNCE_TIME_5MS:
|
| 752 | case MAX77843_DEBOUNCE_TIME_10MS:
|
| 753 | case MAX77843_DEBOUNCE_TIME_25MS:
|
| 754 | case MAX77843_DEBOUNCE_TIME_38_62MS:
|
| 755 | ret = regmap_update_bits(max77843->regmap_muic,
|
| 756 | MAX77843_MUIC_REG_CONTROL4,
|
| 757 | MAX77843_MUIC_CONTROL4_ADCDBSET_MASK,
|
| 758 | time << MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT);
|
| 759 | if (ret < 0) {
|
| 760 | dev_err(info->dev, "Cannot write MUIC regmap\n");
|
| 761 | return ret;
|
| 762 | }
|
| 763 | break;
|
| 764 | default:
|
| 765 | dev_err(info->dev, "Invalid ADC debounce time\n");
|
| 766 | return -EINVAL;
|
| 767 | }
|
| 768 |
|
| 769 | return 0;
|
| 770 | }
|
| 771 |
|
| 772 | static int max77843_init_muic_regmap(struct max77693_dev *max77843)
|
| 773 | {
|
| 774 | int ret;
|
| 775 |
|
| 776 | max77843->i2c_muic = i2c_new_dummy_device(max77843->i2c->adapter,
|
| 777 | I2C_ADDR_MUIC);
|
| 778 | if (IS_ERR(max77843->i2c_muic)) {
|
| 779 | dev_err(&max77843->i2c->dev,
|
| 780 | "Cannot allocate I2C device for MUIC\n");
|
| 781 | return PTR_ERR(max77843->i2c_muic);
|
| 782 | }
|
| 783 |
|
| 784 | i2c_set_clientdata(max77843->i2c_muic, max77843);
|
| 785 |
|
| 786 | max77843->regmap_muic = devm_regmap_init_i2c(max77843->i2c_muic,
|
| 787 | &max77843_muic_regmap_config);
|
| 788 | if (IS_ERR(max77843->regmap_muic)) {
|
| 789 | ret = PTR_ERR(max77843->regmap_muic);
|
| 790 | goto err_muic_i2c;
|
| 791 | }
|
| 792 |
|
| 793 | ret = regmap_add_irq_chip(max77843->regmap_muic, max77843->irq,
|
| 794 | IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
|
| 795 | 0, &max77843_muic_irq_chip, &max77843->irq_data_muic);
|
| 796 | if (ret < 0) {
|
| 797 | dev_err(&max77843->i2c->dev, "Cannot add MUIC IRQ chip\n");
|
| 798 | goto err_muic_i2c;
|
| 799 | }
|
| 800 |
|
| 801 | return 0;
|
| 802 |
|
| 803 | err_muic_i2c:
|
| 804 | i2c_unregister_device(max77843->i2c_muic);
|
| 805 |
|
| 806 | return ret;
|
| 807 | }
|
| 808 |
|
| 809 | static int max77843_muic_probe(struct platform_device *pdev)
|
| 810 | {
|
| 811 | struct max77693_dev *max77843 = dev_get_drvdata(pdev->dev.parent);
|
| 812 | struct max77843_muic_info *info;
|
| 813 | unsigned int id;
|
| 814 | int cable_type;
|
| 815 | bool attached;
|
| 816 | int i, ret;
|
| 817 |
|
| 818 | info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
|
| 819 | if (!info)
|
| 820 | return -ENOMEM;
|
| 821 |
|
| 822 | info->dev = &pdev->dev;
|
| 823 | info->max77843 = max77843;
|
| 824 |
|
| 825 | platform_set_drvdata(pdev, info);
|
| 826 | mutex_init(&info->mutex);
|
| 827 |
|
| 828 |
|
| 829 | ret = max77843_init_muic_regmap(max77843);
|
| 830 | if (ret) {
|
| 831 | dev_err(&pdev->dev, "Failed to init MUIC regmap\n");
|
| 832 | return ret;
|
| 833 | }
|
| 834 |
|
| 835 |
|
| 836 | ret = regmap_update_bits(max77843->regmap_muic,
|
| 837 | MAX77843_MUIC_REG_CONTROL4,
|
| 838 | MAX77843_MUIC_CONTROL4_USBAUTO_MASK |
|
| 839 | MAX77843_MUIC_CONTROL4_FCTAUTO_MASK,
|
| 840 | CONTROL4_AUTO_DISABLE);
|
| 841 |
|
| 842 |
|
| 843 | info->edev = devm_extcon_dev_allocate(&pdev->dev,
|
| 844 | max77843_extcon_cable);
|
| 845 | if (IS_ERR(info->edev)) {
|
| 846 | dev_err(&pdev->dev, "Failed to allocate memory for extcon\n");
|
| 847 | ret = PTR_ERR(info->edev);
|
| 848 | goto err_muic_irq;
|
| 849 | }
|
| 850 |
|
| 851 | ret = devm_extcon_dev_register(&pdev->dev, info->edev);
|
| 852 | if (ret) {
|
| 853 | dev_err(&pdev->dev, "Failed to register extcon device\n");
|
| 854 | goto err_muic_irq;
|
| 855 | }
|
| 856 |
|
| 857 |
|
| 858 | max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS);
|
| 859 |
|
| 860 |
|
| 861 | ret = regmap_bulk_read(max77843->regmap_muic,
|
| 862 | MAX77843_MUIC_REG_STATUS1, info->status,
|
| 863 | MAX77843_MUIC_STATUS_NUM);
|
| 864 | if (ret) {
|
| 865 | dev_err(info->dev, "Cannot read STATUS registers\n");
|
| 866 | goto err_muic_irq;
|
| 867 | }
|
| 868 | cable_type = max77843_muic_get_cable_type(info, MAX77843_CABLE_GROUP_ADC,
|
| 869 | &attached);
|
| 870 | if (attached && cable_type == MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF)
|
| 871 | max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART,
|
| 872 | true, false);
|
| 873 |
|
| 874 |
|
| 875 | ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id);
|
| 876 | if (ret < 0) {
|
| 877 | dev_err(&pdev->dev, "Failed to read revision number\n");
|
| 878 | goto err_muic_irq;
|
| 879 | }
|
| 880 | dev_info(info->dev, "MUIC device ID : 0x%x\n", id);
|
| 881 |
|
| 882 |
|
| 883 | INIT_WORK(&info->irq_work, max77843_muic_irq_work);
|
| 884 |
|
| 885 |
|
| 886 | ret = regmap_bulk_read(max77843->regmap_muic,
|
| 887 | MAX77843_MUIC_REG_INT1, info->status,
|
| 888 | MAX77843_MUIC_STATUS_NUM);
|
| 889 | if (ret) {
|
| 890 | dev_err(&pdev->dev, "Failed to Clear IRQ bits\n");
|
| 891 | goto err_muic_irq;
|
| 892 | }
|
| 893 |
|
| 894 | for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++) {
|
| 895 | struct max77843_muic_irq *muic_irq = &max77843_muic_irqs[i];
|
| 896 | int virq = 0;
|
| 897 |
|
| 898 | virq = regmap_irq_get_virq(max77843->irq_data_muic,
|
| 899 | muic_irq->irq);
|
| 900 | if (virq <= 0) {
|
| 901 | ret = -EINVAL;
|
| 902 | goto err_muic_irq;
|
| 903 | }
|
| 904 | muic_irq->virq = virq;
|
| 905 |
|
| 906 | ret = devm_request_threaded_irq(&pdev->dev, virq, NULL,
|
| 907 | max77843_muic_irq_handler, IRQF_NO_SUSPEND,
|
| 908 | muic_irq->name, info);
|
| 909 | if (ret) {
|
| 910 | dev_err(&pdev->dev,
|
| 911 | "Failed to request irq (IRQ: %d, error: %d)\n",
|
| 912 | muic_irq->irq, ret);
|
| 913 | goto err_muic_irq;
|
| 914 | }
|
| 915 | }
|
| 916 |
|
| 917 |
|
| 918 | INIT_DELAYED_WORK(&info->wq_detcable, max77843_muic_detect_cable_wq);
|
| 919 | queue_delayed_work(system_power_efficient_wq,
|
| 920 | &info->wq_detcable, msecs_to_jiffies(DELAY_MS_DEFAULT));
|
| 921 |
|
| 922 | return 0;
|
| 923 |
|
| 924 | err_muic_irq:
|
| 925 | regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
|
| 926 | i2c_unregister_device(max77843->i2c_muic);
|
| 927 |
|
| 928 | return ret;
|
| 929 | }
|
| 930 |
|
| 931 | static void max77843_muic_remove(struct platform_device *pdev)
|
| 932 | {
|
| 933 | struct max77843_muic_info *info = platform_get_drvdata(pdev);
|
| 934 | struct max77693_dev *max77843 = info->max77843;
|
| 935 |
|
| 936 | cancel_work_sync(&info->irq_work);
|
| 937 | regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
|
| 938 | i2c_unregister_device(max77843->i2c_muic);
|
| 939 | }
|
| 940 |
|
| 941 | static const struct platform_device_id max77843_muic_id[] = {
|
| 942 | { "max77843-muic", },
|
| 943 | { },
|
| 944 | };
|
| 945 | MODULE_DEVICE_TABLE(platform, max77843_muic_id);
|
| 946 |
|
| 947 | static const struct of_device_id of_max77843_muic_dt_match[] = {
|
| 948 | { .compatible = "maxim,max77843-muic", },
|
| 949 | { },
|
| 950 | };
|
| 951 | MODULE_DEVICE_TABLE(of, of_max77843_muic_dt_match);
|
| 952 |
|
| 953 | static struct platform_driver max77843_muic_driver = {
|
| 954 | .driver = {
|
| 955 | .name = "max77843-muic",
|
| 956 | .of_match_table = of_max77843_muic_dt_match,
|
| 957 | },
|
| 958 | .probe = max77843_muic_probe,
|
| 959 | .remove = max77843_muic_remove,
|
| 960 | .id_table = max77843_muic_id,
|
| 961 | };
|
| 962 |
|
| 963 | static int __init max77843_muic_init(void)
|
| 964 | {
|
| 965 | return platform_driver_register(&max77843_muic_driver);
|
| 966 | }
|
| 967 | subsys_initcall(max77843_muic_init);
|
| 968 |
|
| 969 | MODULE_DESCRIPTION("Maxim MAX77843 Extcon driver");
|
| 970 | MODULE_AUTHOR("Jaewon Kim <[email protected]>");
|
| 971 | MODULE_LICENSE("GPL");
|