projects/linux·blob master · refs

737 lines · 20.4 KiB

1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2018 Spreadtrum Communications Inc.
4 * Copyright (C) 2018 Linaro Ltd.
5 */
6
7#include <linux/bitops.h>
8#include <linux/gpio/driver.h>
9#include <linux/interrupt.h>
10#include <linux/kernel.h>
11#include <linux/module.h>
12#include <linux/notifier.h>
13#include <linux/platform_device.h>
14#include <linux/property.h>
15#include <linux/spinlock.h>
16
17/* EIC registers definition */
18#define SPRD_EIC_DBNC_DATA 0x0
19#define SPRD_EIC_DBNC_DMSK 0x4
20#define SPRD_EIC_DBNC_IEV 0x14
21#define SPRD_EIC_DBNC_IE 0x18
22#define SPRD_EIC_DBNC_RIS 0x1c
23#define SPRD_EIC_DBNC_MIS 0x20
24#define SPRD_EIC_DBNC_IC 0x24
25#define SPRD_EIC_DBNC_TRIG 0x28
26#define SPRD_EIC_DBNC_CTRL0 0x40
27
28#define SPRD_EIC_LATCH_INTEN 0x0
29#define SPRD_EIC_LATCH_INTRAW 0x4
30#define SPRD_EIC_LATCH_INTMSK 0x8
31#define SPRD_EIC_LATCH_INTCLR 0xc
32#define SPRD_EIC_LATCH_INTPOL 0x10
33#define SPRD_EIC_LATCH_INTMODE 0x14
34
35#define SPRD_EIC_ASYNC_INTIE 0x0
36#define SPRD_EIC_ASYNC_INTRAW 0x4
37#define SPRD_EIC_ASYNC_INTMSK 0x8
38#define SPRD_EIC_ASYNC_INTCLR 0xc
39#define SPRD_EIC_ASYNC_INTMODE 0x10
40#define SPRD_EIC_ASYNC_INTBOTH 0x14
41#define SPRD_EIC_ASYNC_INTPOL 0x18
42#define SPRD_EIC_ASYNC_DATA 0x1c
43
44#define SPRD_EIC_SYNC_INTIE 0x0
45#define SPRD_EIC_SYNC_INTRAW 0x4
46#define SPRD_EIC_SYNC_INTMSK 0x8
47#define SPRD_EIC_SYNC_INTCLR 0xc
48#define SPRD_EIC_SYNC_INTMODE 0x10
49#define SPRD_EIC_SYNC_INTBOTH 0x14
50#define SPRD_EIC_SYNC_INTPOL 0x18
51#define SPRD_EIC_SYNC_DATA 0x1c
52
53/*
54 * The digital-chip EIC controller can support maximum 3 banks, and each bank
55 * contains 8 EICs.
56 */
57#define SPRD_EIC_MAX_BANK 3
58#define SPRD_EIC_PER_BANK_NR 8
59#define SPRD_EIC_DATA_MASK GENMASK(7, 0)
60#define SPRD_EIC_BIT(x) ((x) & (SPRD_EIC_PER_BANK_NR - 1))
61#define SPRD_EIC_DBNC_MASK GENMASK(11, 0)
62
63/*
64 * The Spreadtrum EIC (external interrupt controller) can be used only in
65 * input mode to generate interrupts if detecting input signals.
66 *
67 * The Spreadtrum digital-chip EIC controller contains 4 sub-modules:
68 * debounce EIC, latch EIC, async EIC and sync EIC,
69 *
70 * The debounce EIC is used to capture the input signals' stable status
71 * (millisecond resolution) and a single-trigger mechanism is introduced
72 * into this sub-module to enhance the input event detection reliability.
73 * The debounce range is from 1ms to 4s with a step size of 1ms.
74 *
75 * The latch EIC is used to latch some special power down signals and
76 * generate interrupts, since the latch EIC does not depend on the APB clock
77 * to capture signals.
78 *
79 * The async EIC uses a 32k clock to capture the short signals (microsecond
80 * resolution) to generate interrupts by level or edge trigger.
81 *
82 * The EIC-sync is similar with GPIO's input function, which is a synchronized
83 * signal input register.
84 */
85enum sprd_eic_type {
86 SPRD_EIC_DEBOUNCE,
87 SPRD_EIC_LATCH,
88 SPRD_EIC_ASYNC,
89 SPRD_EIC_SYNC,
90 SPRD_EIC_MAX,
91};
92
93struct sprd_eic {
94 struct gpio_chip chip;
95 struct notifier_block irq_nb;
96 void __iomem *base[SPRD_EIC_MAX_BANK];
97 enum sprd_eic_type type;
98 raw_spinlock_t lock;
99 int irq;
100};
101
102static ATOMIC_NOTIFIER_HEAD(sprd_eic_irq_notifier);
103
104static struct sprd_eic *to_sprd_eic(struct notifier_block *nb)
105{
106 return container_of(nb, struct sprd_eic, irq_nb);
107}
108
109struct sprd_eic_variant_data {
110 enum sprd_eic_type type;
111};
112
113static const char *sprd_eic_label_name[SPRD_EIC_MAX] = {
114 "eic-debounce", "eic-latch", "eic-async",
115 "eic-sync",
116};
117
118static const struct sprd_eic_variant_data sc9860_eic_dbnc_data = {
119 .type = SPRD_EIC_DEBOUNCE,
120};
121
122static const struct sprd_eic_variant_data sc9860_eic_latch_data = {
123 .type = SPRD_EIC_LATCH,
124};
125
126static const struct sprd_eic_variant_data sc9860_eic_async_data = {
127 .type = SPRD_EIC_ASYNC,
128};
129
130static const struct sprd_eic_variant_data sc9860_eic_sync_data = {
131 .type = SPRD_EIC_SYNC,
132};
133
134static inline void __iomem *sprd_eic_offset_base(struct sprd_eic *sprd_eic,
135 unsigned int bank)
136{
137 if (bank >= SPRD_EIC_MAX_BANK)
138 return NULL;
139
140 return sprd_eic->base[bank];
141}
142
143static void sprd_eic_update(struct gpio_chip *chip, unsigned int offset,
144 u16 reg, unsigned int val)
145{
146 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
147 void __iomem *base =
148 sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
149 unsigned long flags;
150 u32 tmp;
151
152 raw_spin_lock_irqsave(&sprd_eic->lock, flags);
153 tmp = readl_relaxed(base + reg);
154
155 if (val)
156 tmp |= BIT(SPRD_EIC_BIT(offset));
157 else
158 tmp &= ~BIT(SPRD_EIC_BIT(offset));
159
160 writel_relaxed(tmp, base + reg);
161 raw_spin_unlock_irqrestore(&sprd_eic->lock, flags);
162}
163
164static int sprd_eic_read(struct gpio_chip *chip, unsigned int offset, u16 reg)
165{
166 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
167 void __iomem *base =
168 sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
169
170 return !!(readl_relaxed(base + reg) & BIT(SPRD_EIC_BIT(offset)));
171}
172
173static int sprd_eic_request(struct gpio_chip *chip, unsigned int offset)
174{
175 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 1);
176 return 0;
177}
178
179static void sprd_eic_free(struct gpio_chip *chip, unsigned int offset)
180{
181 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 0);
182}
183
184static int sprd_eic_get(struct gpio_chip *chip, unsigned int offset)
185{
186 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
187
188 switch (sprd_eic->type) {
189 case SPRD_EIC_DEBOUNCE:
190 return sprd_eic_read(chip, offset, SPRD_EIC_DBNC_DATA);
191 case SPRD_EIC_ASYNC:
192 return sprd_eic_read(chip, offset, SPRD_EIC_ASYNC_DATA);
193 case SPRD_EIC_SYNC:
194 return sprd_eic_read(chip, offset, SPRD_EIC_SYNC_DATA);
195 default:
196 return -ENOTSUPP;
197 }
198}
199
200static int sprd_eic_direction_input(struct gpio_chip *chip, unsigned int offset)
201{
202 /* EICs are always input, nothing need to do here. */
203 return 0;
204}
205
206static int sprd_eic_set(struct gpio_chip *chip, unsigned int offset, int value)
207{
208 /* EICs are always input, nothing need to do here. */
209 return 0;
210}
211
212static int sprd_eic_set_debounce(struct gpio_chip *chip, unsigned int offset,
213 unsigned int debounce)
214{
215 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
216 void __iomem *base =
217 sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
218 u32 reg = SPRD_EIC_DBNC_CTRL0 + SPRD_EIC_BIT(offset) * 0x4;
219 u32 value = readl_relaxed(base + reg) & ~SPRD_EIC_DBNC_MASK;
220
221 value |= (debounce / 1000) & SPRD_EIC_DBNC_MASK;
222 writel_relaxed(value, base + reg);
223
224 return 0;
225}
226
227static int sprd_eic_set_config(struct gpio_chip *chip, unsigned int offset,
228 unsigned long config)
229{
230 unsigned long param = pinconf_to_config_param(config);
231 u32 arg = pinconf_to_config_argument(config);
232
233 if (param == PIN_CONFIG_INPUT_DEBOUNCE)
234 return sprd_eic_set_debounce(chip, offset, arg);
235
236 return -ENOTSUPP;
237}
238
239static void sprd_eic_irq_mask(struct irq_data *data)
240{
241 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
242 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
243 u32 offset = irqd_to_hwirq(data);
244
245 switch (sprd_eic->type) {
246 case SPRD_EIC_DEBOUNCE:
247 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 0);
248 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 0);
249 break;
250 case SPRD_EIC_LATCH:
251 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 0);
252 break;
253 case SPRD_EIC_ASYNC:
254 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 0);
255 break;
256 case SPRD_EIC_SYNC:
257 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 0);
258 break;
259 default:
260 dev_err(chip->parent, "Unsupported EIC type.\n");
261 }
262
263 gpiochip_disable_irq(chip, offset);
264}
265
266static void sprd_eic_irq_unmask(struct irq_data *data)
267{
268 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
269 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
270 u32 offset = irqd_to_hwirq(data);
271
272 gpiochip_enable_irq(chip, offset);
273
274 switch (sprd_eic->type) {
275 case SPRD_EIC_DEBOUNCE:
276 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 1);
277 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 1);
278 break;
279 case SPRD_EIC_LATCH:
280 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 1);
281 break;
282 case SPRD_EIC_ASYNC:
283 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 1);
284 break;
285 case SPRD_EIC_SYNC:
286 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 1);
287 break;
288 default:
289 dev_err(chip->parent, "Unsupported EIC type.\n");
290 }
291}
292
293static void sprd_eic_irq_ack(struct irq_data *data)
294{
295 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
296 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
297 u32 offset = irqd_to_hwirq(data);
298
299 switch (sprd_eic->type) {
300 case SPRD_EIC_DEBOUNCE:
301 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IC, 1);
302 break;
303 case SPRD_EIC_LATCH:
304 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTCLR, 1);
305 break;
306 case SPRD_EIC_ASYNC:
307 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
308 break;
309 case SPRD_EIC_SYNC:
310 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
311 break;
312 default:
313 dev_err(chip->parent, "Unsupported EIC type.\n");
314 }
315}
316
317static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
318{
319 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
320 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
321 u32 offset = irqd_to_hwirq(data);
322 int state;
323
324 switch (sprd_eic->type) {
325 case SPRD_EIC_DEBOUNCE:
326 switch (flow_type) {
327 case IRQ_TYPE_LEVEL_HIGH:
328 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1);
329 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IC, 1);
330 break;
331 case IRQ_TYPE_LEVEL_LOW:
332 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
333 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IC, 1);
334 break;
335 case IRQ_TYPE_EDGE_RISING:
336 case IRQ_TYPE_EDGE_FALLING:
337 case IRQ_TYPE_EDGE_BOTH:
338 state = sprd_eic_get(chip, offset);
339 if (state) {
340 sprd_eic_update(chip, offset,
341 SPRD_EIC_DBNC_IEV, 0);
342 sprd_eic_update(chip, offset,
343 SPRD_EIC_DBNC_IC, 1);
344 } else {
345 sprd_eic_update(chip, offset,
346 SPRD_EIC_DBNC_IEV, 1);
347 sprd_eic_update(chip, offset,
348 SPRD_EIC_DBNC_IC, 1);
349 }
350 break;
351 default:
352 return -ENOTSUPP;
353 }
354
355 irq_set_handler_locked(data, handle_level_irq);
356 break;
357 case SPRD_EIC_LATCH:
358 switch (flow_type) {
359 case IRQ_TYPE_LEVEL_HIGH:
360 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0);
361 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTCLR, 1);
362 break;
363 case IRQ_TYPE_LEVEL_LOW:
364 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1);
365 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTCLR, 1);
366 break;
367 case IRQ_TYPE_EDGE_RISING:
368 case IRQ_TYPE_EDGE_FALLING:
369 case IRQ_TYPE_EDGE_BOTH:
370 state = sprd_eic_get(chip, offset);
371 if (state) {
372 sprd_eic_update(chip, offset,
373 SPRD_EIC_LATCH_INTPOL, 0);
374 sprd_eic_update(chip, offset,
375 SPRD_EIC_LATCH_INTCLR, 1);
376 } else {
377 sprd_eic_update(chip, offset,
378 SPRD_EIC_LATCH_INTPOL, 1);
379 sprd_eic_update(chip, offset,
380 SPRD_EIC_LATCH_INTCLR, 1);
381 }
382 break;
383 default:
384 return -ENOTSUPP;
385 }
386
387 irq_set_handler_locked(data, handle_level_irq);
388 break;
389 case SPRD_EIC_ASYNC:
390 switch (flow_type) {
391 case IRQ_TYPE_EDGE_RISING:
392 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
393 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
394 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
395 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
396 irq_set_handler_locked(data, handle_edge_irq);
397 break;
398 case IRQ_TYPE_EDGE_FALLING:
399 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
400 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
401 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
402 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
403 irq_set_handler_locked(data, handle_edge_irq);
404 break;
405 case IRQ_TYPE_EDGE_BOTH:
406 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
407 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 1);
408 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
409 irq_set_handler_locked(data, handle_edge_irq);
410 break;
411 case IRQ_TYPE_LEVEL_HIGH:
412 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
413 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
414 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
415 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
416 irq_set_handler_locked(data, handle_level_irq);
417 break;
418 case IRQ_TYPE_LEVEL_LOW:
419 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
420 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
421 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
422 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
423 irq_set_handler_locked(data, handle_level_irq);
424 break;
425 default:
426 return -ENOTSUPP;
427 }
428 break;
429 case SPRD_EIC_SYNC:
430 switch (flow_type) {
431 case IRQ_TYPE_EDGE_RISING:
432 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
433 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
434 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
435 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
436 irq_set_handler_locked(data, handle_edge_irq);
437 break;
438 case IRQ_TYPE_EDGE_FALLING:
439 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
440 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
441 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
442 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
443 irq_set_handler_locked(data, handle_edge_irq);
444 break;
445 case IRQ_TYPE_EDGE_BOTH:
446 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
447 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 1);
448 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
449 irq_set_handler_locked(data, handle_edge_irq);
450 break;
451 case IRQ_TYPE_LEVEL_HIGH:
452 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
453 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
454 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
455 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
456 irq_set_handler_locked(data, handle_level_irq);
457 break;
458 case IRQ_TYPE_LEVEL_LOW:
459 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
460 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
461 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
462 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
463 irq_set_handler_locked(data, handle_level_irq);
464 break;
465 default:
466 return -ENOTSUPP;
467 }
468 break;
469 default:
470 dev_err(chip->parent, "Unsupported EIC type.\n");
471 return -ENOTSUPP;
472 }
473
474 return 0;
475}
476
477static void sprd_eic_toggle_trigger(struct gpio_chip *chip, unsigned int irq,
478 unsigned int offset)
479{
480 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
481 struct irq_data *data = irq_get_irq_data(irq);
482 u32 trigger = irqd_get_trigger_type(data);
483 int state, post_state;
484
485 /*
486 * The debounce EIC and latch EIC can only support level trigger, so we
487 * can toggle the level trigger to emulate the edge trigger.
488 */
489 if ((sprd_eic->type != SPRD_EIC_DEBOUNCE &&
490 sprd_eic->type != SPRD_EIC_LATCH) ||
491 !(trigger & IRQ_TYPE_EDGE_BOTH))
492 return;
493
494 sprd_eic_irq_mask(data);
495 state = sprd_eic_get(chip, offset);
496
497retry:
498 switch (sprd_eic->type) {
499 case SPRD_EIC_DEBOUNCE:
500 if (state)
501 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
502 else
503 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1);
504 break;
505 case SPRD_EIC_LATCH:
506 if (state)
507 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0);
508 else
509 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1);
510 break;
511 default:
512 sprd_eic_irq_unmask(data);
513 return;
514 }
515
516 post_state = sprd_eic_get(chip, offset);
517 if (state != post_state) {
518 dev_warn(chip->parent, "EIC level was changed.\n");
519 state = post_state;
520 goto retry;
521 }
522
523 sprd_eic_irq_unmask(data);
524}
525
526static void sprd_eic_handle_one_type(struct gpio_chip *chip)
527{
528 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
529 u32 bank, n, girq;
530
531 for (bank = 0; bank * SPRD_EIC_PER_BANK_NR < chip->ngpio; bank++) {
532 void __iomem *base = sprd_eic_offset_base(sprd_eic, bank);
533 unsigned long reg;
534
535 switch (sprd_eic->type) {
536 case SPRD_EIC_DEBOUNCE:
537 reg = readl_relaxed(base + SPRD_EIC_DBNC_MIS) &
538 SPRD_EIC_DATA_MASK;
539 break;
540 case SPRD_EIC_LATCH:
541 reg = readl_relaxed(base + SPRD_EIC_LATCH_INTMSK) &
542 SPRD_EIC_DATA_MASK;
543 break;
544 case SPRD_EIC_ASYNC:
545 reg = readl_relaxed(base + SPRD_EIC_ASYNC_INTMSK) &
546 SPRD_EIC_DATA_MASK;
547 break;
548 case SPRD_EIC_SYNC:
549 reg = readl_relaxed(base + SPRD_EIC_SYNC_INTMSK) &
550 SPRD_EIC_DATA_MASK;
551 break;
552 default:
553 dev_err(chip->parent, "Unsupported EIC type.\n");
554 return;
555 }
556
557 for_each_set_bit(n, &reg, SPRD_EIC_PER_BANK_NR) {
558 u32 offset = bank * SPRD_EIC_PER_BANK_NR + n;
559
560 girq = irq_find_mapping(chip->irq.domain, offset);
561
562 generic_handle_irq(girq);
563 sprd_eic_toggle_trigger(chip, girq, offset);
564 }
565 }
566}
567
568static void sprd_eic_irq_handler(struct irq_desc *desc)
569{
570 struct irq_chip *ic = irq_desc_get_chip(desc);
571
572 chained_irq_enter(ic, desc);
573
574 /*
575 * Since the digital-chip EIC 4 sub-modules (debounce, latch, async
576 * and sync) share one same interrupt line, we should notify all of
577 * them to let them check if there are EIC interrupts were triggered.
578 */
579 atomic_notifier_call_chain(&sprd_eic_irq_notifier, 0, NULL);
580
581 chained_irq_exit(ic, desc);
582}
583
584static int sprd_eic_irq_notify(struct notifier_block *nb, unsigned long action,
585 void *data)
586{
587 struct sprd_eic *sprd_eic = to_sprd_eic(nb);
588
589 sprd_eic_handle_one_type(&sprd_eic->chip);
590
591 return NOTIFY_OK;
592}
593
594static const struct irq_chip sprd_eic_irq = {
595 .name = "sprd-eic",
596 .irq_ack = sprd_eic_irq_ack,
597 .irq_mask = sprd_eic_irq_mask,
598 .irq_unmask = sprd_eic_irq_unmask,
599 .irq_set_type = sprd_eic_irq_set_type,
600 .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_IMMUTABLE,
601 GPIOCHIP_IRQ_RESOURCE_HELPERS,
602};
603
604static void sprd_eic_unregister_notifier(void *data)
605{
606 struct notifier_block *nb = data;
607
608 atomic_notifier_chain_unregister(&sprd_eic_irq_notifier, nb);
609}
610
611static int sprd_eic_probe(struct platform_device *pdev)
612{
613 const struct sprd_eic_variant_data *pdata;
614 struct device *dev = &pdev->dev;
615 struct gpio_irq_chip *irq;
616 struct sprd_eic *sprd_eic;
617 struct resource *res;
618 u16 num_banks = 0;
619 int ret, i;
620
621 pdata = device_get_match_data(dev);
622 if (!pdata) {
623 dev_err(dev, "No matching driver data found.\n");
624 return -EINVAL;
625 }
626
627 sprd_eic = devm_kzalloc(dev, sizeof(*sprd_eic), GFP_KERNEL);
628 if (!sprd_eic)
629 return -ENOMEM;
630
631 raw_spin_lock_init(&sprd_eic->lock);
632 sprd_eic->type = pdata->type;
633
634 sprd_eic->irq = platform_get_irq(pdev, 0);
635 if (sprd_eic->irq < 0)
636 return sprd_eic->irq;
637
638 for (i = 0; i < SPRD_EIC_MAX_BANK; i++) {
639 /*
640 * We can have maximum 3 banks EICs, and each EIC has
641 * its own base address. But some platform maybe only
642 * have one bank EIC, thus base[1] and base[2] can be
643 * optional.
644 */
645 res = platform_get_resource(pdev, IORESOURCE_MEM, i);
646 if (!res)
647 break;
648
649 sprd_eic->base[i] = devm_ioremap_resource(dev, res);
650 if (IS_ERR(sprd_eic->base[i]))
651 return PTR_ERR(sprd_eic->base[i]);
652
653 num_banks++;
654 }
655
656 sprd_eic->chip.label = sprd_eic_label_name[sprd_eic->type];
657 sprd_eic->chip.ngpio = num_banks * SPRD_EIC_PER_BANK_NR;
658 sprd_eic->chip.base = -1;
659 sprd_eic->chip.parent = dev;
660 sprd_eic->chip.direction_input = sprd_eic_direction_input;
661 switch (sprd_eic->type) {
662 case SPRD_EIC_DEBOUNCE:
663 sprd_eic->chip.request = sprd_eic_request;
664 sprd_eic->chip.free = sprd_eic_free;
665 sprd_eic->chip.set_config = sprd_eic_set_config;
666 sprd_eic->chip.set = sprd_eic_set;
667 fallthrough;
668 case SPRD_EIC_ASYNC:
669 case SPRD_EIC_SYNC:
670 sprd_eic->chip.get = sprd_eic_get;
671 break;
672 case SPRD_EIC_LATCH:
673 default:
674 break;
675 }
676
677 irq = &sprd_eic->chip.irq;
678 gpio_irq_chip_set_chip(irq, &sprd_eic_irq);
679 irq->handler = handle_bad_irq;
680 irq->default_type = IRQ_TYPE_NONE;
681 irq->parent_handler = sprd_eic_irq_handler;
682 irq->parent_handler_data = sprd_eic;
683 irq->num_parents = 1;
684 irq->parents = &sprd_eic->irq;
685
686 ret = devm_gpiochip_add_data(dev, &sprd_eic->chip, sprd_eic);
687 if (ret < 0) {
688 dev_err(dev, "Could not register gpiochip %d.\n", ret);
689 return ret;
690 }
691
692 sprd_eic->irq_nb.notifier_call = sprd_eic_irq_notify;
693 ret = atomic_notifier_chain_register(&sprd_eic_irq_notifier,
694 &sprd_eic->irq_nb);
695 if (ret)
696 return dev_err_probe(dev, ret,
697 "Failed to register with the interrupt notifier");
698
699 return devm_add_action_or_reset(dev, sprd_eic_unregister_notifier,
700 &sprd_eic->irq_nb);
701}
702
703static const struct of_device_id sprd_eic_of_match[] = {
704 {
705 .compatible = "sprd,sc9860-eic-debounce",
706 .data = &sc9860_eic_dbnc_data,
707 },
708 {
709 .compatible = "sprd,sc9860-eic-latch",
710 .data = &sc9860_eic_latch_data,
711 },
712 {
713 .compatible = "sprd,sc9860-eic-async",
714 .data = &sc9860_eic_async_data,
715 },
716 {
717 .compatible = "sprd,sc9860-eic-sync",
718 .data = &sc9860_eic_sync_data,
719 },
720 {
721 /* end of list */
722 }
723};
724MODULE_DEVICE_TABLE(of, sprd_eic_of_match);
725
726static struct platform_driver sprd_eic_driver = {
727 .probe = sprd_eic_probe,
728 .driver = {
729 .name = "sprd-eic",
730 .of_match_table = sprd_eic_of_match,
731 },
732};
733
734module_platform_driver(sprd_eic_driver);
735
736MODULE_DESCRIPTION("Spreadtrum EIC driver");
737MODULE_LICENSE("GPL v2");