| 1 | |
| 2 | |
| 3 | * Azoteq IQS269A Capacitive Touch Controller
|
| 4 | *
|
| 5 | * Copyright (C) 2020 Jeff LaBundy <[email protected]>
|
| 6 | *
|
| 7 | * This driver registers up to 3 input devices: one representing capacitive or
|
| 8 | * inductive keys as well as Hall-effect switches, and one for each of the two
|
| 9 | * axial sliders presented by the device.
|
| 10 |
|
| 11 |
|
| 12 | #include <linux/bits.h>
|
| 13 | #include <linux/completion.h>
|
| 14 | #include <linux/delay.h>
|
| 15 | #include <linux/device.h>
|
| 16 | #include <linux/err.h>
|
| 17 | #include <linux/i2c.h>
|
| 18 | #include <linux/input.h>
|
| 19 | #include <linux/interrupt.h>
|
| 20 | #include <linux/kernel.h>
|
| 21 | #include <linux/module.h>
|
| 22 | #include <linux/mutex.h>
|
| 23 | #include <linux/property.h>
|
| 24 | #include <linux/regmap.h>
|
| 25 | #include <linux/slab.h>
|
| 26 |
|
| 27 | #define IQS269_VER_INFO 0x00
|
| 28 | #define IQS269_VER_INFO_PROD_NUM 0x4F
|
| 29 | #define IQS269_VER_INFO_FW_NUM_2 0x03
|
| 30 | #define IQS269_VER_INFO_FW_NUM_3 0x10
|
| 31 |
|
| 32 | #define IQS269_SYS_FLAGS 0x02
|
| 33 | #define IQS269_SYS_FLAGS_SHOW_RESET BIT(15)
|
| 34 | #define IQS269_SYS_FLAGS_PWR_MODE_MASK GENMASK(12, 11)
|
| 35 | #define IQS269_SYS_FLAGS_PWR_MODE_SHIFT 11
|
| 36 | #define IQS269_SYS_FLAGS_IN_ATI BIT(10)
|
| 37 |
|
| 38 | #define IQS269_CHx_COUNTS 0x08
|
| 39 |
|
| 40 | #define IQS269_SLIDER_X 0x30
|
| 41 |
|
| 42 | #define IQS269_CAL_DATA_A 0x35
|
| 43 | #define IQS269_CAL_DATA_A_HALL_BIN_L_MASK GENMASK(15, 12)
|
| 44 | #define IQS269_CAL_DATA_A_HALL_BIN_L_SHIFT 12
|
| 45 | #define IQS269_CAL_DATA_A_HALL_BIN_R_MASK GENMASK(11, 8)
|
| 46 | #define IQS269_CAL_DATA_A_HALL_BIN_R_SHIFT 8
|
| 47 |
|
| 48 | #define IQS269_SYS_SETTINGS 0x80
|
| 49 | #define IQS269_SYS_SETTINGS_CLK_DIV BIT(15)
|
| 50 | #define IQS269_SYS_SETTINGS_ULP_AUTO BIT(14)
|
| 51 | #define IQS269_SYS_SETTINGS_DIS_AUTO BIT(13)
|
| 52 | #define IQS269_SYS_SETTINGS_PWR_MODE_MASK GENMASK(12, 11)
|
| 53 | #define IQS269_SYS_SETTINGS_PWR_MODE_SHIFT 11
|
| 54 | #define IQS269_SYS_SETTINGS_PWR_MODE_MAX 3
|
| 55 | #define IQS269_SYS_SETTINGS_ULP_UPDATE_MASK GENMASK(10, 8)
|
| 56 | #define IQS269_SYS_SETTINGS_ULP_UPDATE_SHIFT 8
|
| 57 | #define IQS269_SYS_SETTINGS_ULP_UPDATE_MAX 7
|
| 58 | #define IQS269_SYS_SETTINGS_SLIDER_SWIPE BIT(7)
|
| 59 | #define IQS269_SYS_SETTINGS_RESEED_OFFSET BIT(6)
|
| 60 | #define IQS269_SYS_SETTINGS_EVENT_MODE BIT(5)
|
| 61 | #define IQS269_SYS_SETTINGS_EVENT_MODE_LP BIT(4)
|
| 62 | #define IQS269_SYS_SETTINGS_REDO_ATI BIT(2)
|
| 63 | #define IQS269_SYS_SETTINGS_ACK_RESET BIT(0)
|
| 64 |
|
| 65 | #define IQS269_FILT_STR_LP_LTA_MASK GENMASK(7, 6)
|
| 66 | #define IQS269_FILT_STR_LP_LTA_SHIFT 6
|
| 67 | #define IQS269_FILT_STR_LP_CNT_MASK GENMASK(5, 4)
|
| 68 | #define IQS269_FILT_STR_LP_CNT_SHIFT 4
|
| 69 | #define IQS269_FILT_STR_NP_LTA_MASK GENMASK(3, 2)
|
| 70 | #define IQS269_FILT_STR_NP_LTA_SHIFT 2
|
| 71 | #define IQS269_FILT_STR_NP_CNT_MASK GENMASK(1, 0)
|
| 72 | #define IQS269_FILT_STR_MAX 3
|
| 73 |
|
| 74 | #define IQS269_EVENT_MASK_SYS BIT(6)
|
| 75 | #define IQS269_EVENT_MASK_GESTURE BIT(3)
|
| 76 | #define IQS269_EVENT_MASK_DEEP BIT(2)
|
| 77 | #define IQS269_EVENT_MASK_TOUCH BIT(1)
|
| 78 | #define IQS269_EVENT_MASK_PROX BIT(0)
|
| 79 |
|
| 80 | #define IQS269_RATE_NP_MS_MAX 255
|
| 81 | #define IQS269_RATE_LP_MS_MAX 255
|
| 82 | #define IQS269_RATE_ULP_MS_MAX 4080
|
| 83 | #define IQS269_TIMEOUT_PWR_MS_MAX 130560
|
| 84 | #define IQS269_TIMEOUT_LTA_MS_MAX 130560
|
| 85 |
|
| 86 | #define IQS269_MISC_A_ATI_BAND_DISABLE BIT(15)
|
| 87 | #define IQS269_MISC_A_ATI_LP_ONLY BIT(14)
|
| 88 | #define IQS269_MISC_A_ATI_BAND_TIGHTEN BIT(13)
|
| 89 | #define IQS269_MISC_A_FILT_DISABLE BIT(12)
|
| 90 | #define IQS269_MISC_A_GPIO3_SELECT_MASK GENMASK(10, 8)
|
| 91 | #define IQS269_MISC_A_GPIO3_SELECT_SHIFT 8
|
| 92 | #define IQS269_MISC_A_DUAL_DIR BIT(6)
|
| 93 | #define IQS269_MISC_A_TX_FREQ_MASK GENMASK(5, 4)
|
| 94 | #define IQS269_MISC_A_TX_FREQ_SHIFT 4
|
| 95 | #define IQS269_MISC_A_TX_FREQ_MAX 3
|
| 96 | #define IQS269_MISC_A_GLOBAL_CAP_SIZE BIT(0)
|
| 97 |
|
| 98 | #define IQS269_MISC_B_RESEED_UI_SEL_MASK GENMASK(7, 6)
|
| 99 | #define IQS269_MISC_B_RESEED_UI_SEL_SHIFT 6
|
| 100 | #define IQS269_MISC_B_RESEED_UI_SEL_MAX 3
|
| 101 | #define IQS269_MISC_B_TRACKING_UI_ENABLE BIT(4)
|
| 102 | #define IQS269_MISC_B_FILT_STR_SLIDER GENMASK(1, 0)
|
| 103 |
|
| 104 | #define IQS269_TOUCH_HOLD_SLIDER_SEL 0x89
|
| 105 | #define IQS269_TOUCH_HOLD_DEFAULT 0x14
|
| 106 | #define IQS269_TOUCH_HOLD_MS_MIN 256
|
| 107 | #define IQS269_TOUCH_HOLD_MS_MAX 65280
|
| 108 |
|
| 109 | #define IQS269_TIMEOUT_TAP_MS_MAX 4080
|
| 110 | #define IQS269_TIMEOUT_SWIPE_MS_MAX 4080
|
| 111 | #define IQS269_THRESH_SWIPE_MAX 255
|
| 112 |
|
| 113 | #define IQS269_CHx_ENG_A_MEAS_CAP_SIZE BIT(15)
|
| 114 | #define IQS269_CHx_ENG_A_RX_GND_INACTIVE BIT(13)
|
| 115 | #define IQS269_CHx_ENG_A_LOCAL_CAP_SIZE BIT(12)
|
| 116 | #define IQS269_CHx_ENG_A_ATI_MODE_MASK GENMASK(9, 8)
|
| 117 | #define IQS269_CHx_ENG_A_ATI_MODE_SHIFT 8
|
| 118 | #define IQS269_CHx_ENG_A_ATI_MODE_MAX 3
|
| 119 | #define IQS269_CHx_ENG_A_INV_LOGIC BIT(7)
|
| 120 | #define IQS269_CHx_ENG_A_PROJ_BIAS_MASK GENMASK(6, 5)
|
| 121 | #define IQS269_CHx_ENG_A_PROJ_BIAS_SHIFT 5
|
| 122 | #define IQS269_CHx_ENG_A_PROJ_BIAS_MAX 3
|
| 123 | #define IQS269_CHx_ENG_A_SENSE_MODE_MASK GENMASK(3, 0)
|
| 124 | #define IQS269_CHx_ENG_A_SENSE_MODE_MAX 15
|
| 125 |
|
| 126 | #define IQS269_CHx_ENG_B_LOCAL_CAP_ENABLE BIT(13)
|
| 127 | #define IQS269_CHx_ENG_B_SENSE_FREQ_MASK GENMASK(10, 9)
|
| 128 | #define IQS269_CHx_ENG_B_SENSE_FREQ_SHIFT 9
|
| 129 | #define IQS269_CHx_ENG_B_SENSE_FREQ_MAX 3
|
| 130 | #define IQS269_CHx_ENG_B_STATIC_ENABLE BIT(8)
|
| 131 | #define IQS269_CHx_ENG_B_ATI_BASE_MASK GENMASK(7, 6)
|
| 132 | #define IQS269_CHx_ENG_B_ATI_BASE_75 0x00
|
| 133 | #define IQS269_CHx_ENG_B_ATI_BASE_100 0x40
|
| 134 | #define IQS269_CHx_ENG_B_ATI_BASE_150 0x80
|
| 135 | #define IQS269_CHx_ENG_B_ATI_BASE_200 0xC0
|
| 136 | #define IQS269_CHx_ENG_B_ATI_TARGET_MASK GENMASK(5, 0)
|
| 137 | #define IQS269_CHx_ENG_B_ATI_TARGET_MAX 2016
|
| 138 |
|
| 139 | #define IQS269_CHx_WEIGHT_MAX 255
|
| 140 | #define IQS269_CHx_THRESH_MAX 255
|
| 141 | #define IQS269_CHx_HYST_DEEP_MASK GENMASK(7, 4)
|
| 142 | #define IQS269_CHx_HYST_DEEP_SHIFT 4
|
| 143 | #define IQS269_CHx_HYST_TOUCH_MASK GENMASK(3, 0)
|
| 144 | #define IQS269_CHx_HYST_MAX 15
|
| 145 |
|
| 146 | #define IQS269_CHx_HALL_INACTIVE 6
|
| 147 | #define IQS269_CHx_HALL_ACTIVE 7
|
| 148 |
|
| 149 | #define IQS269_HALL_PAD_R BIT(0)
|
| 150 | #define IQS269_HALL_PAD_L BIT(1)
|
| 151 | #define IQS269_HALL_PAD_INV BIT(6)
|
| 152 |
|
| 153 | #define IQS269_HALL_UI 0xF5
|
| 154 | #define IQS269_HALL_UI_ENABLE BIT(15)
|
| 155 |
|
| 156 | #define IQS269_MAX_REG 0xFF
|
| 157 |
|
| 158 | #define IQS269_OTP_OPTION_DEFAULT 0x00
|
| 159 | #define IQS269_OTP_OPTION_TWS 0xD0
|
| 160 | #define IQS269_OTP_OPTION_HOLD BIT(7)
|
| 161 |
|
| 162 | #define IQS269_NUM_CH 8
|
| 163 | #define IQS269_NUM_SL 2
|
| 164 |
|
| 165 | #define iqs269_irq_wait() usleep_range(200, 250)
|
| 166 |
|
| 167 | enum iqs269_local_cap_size {
|
| 168 | IQS269_LOCAL_CAP_SIZE_0,
|
| 169 | IQS269_LOCAL_CAP_SIZE_GLOBAL_ONLY,
|
| 170 | IQS269_LOCAL_CAP_SIZE_GLOBAL_0pF5,
|
| 171 | };
|
| 172 |
|
| 173 | enum iqs269_st_offs {
|
| 174 | IQS269_ST_OFFS_PROX,
|
| 175 | IQS269_ST_OFFS_DIR,
|
| 176 | IQS269_ST_OFFS_TOUCH,
|
| 177 | IQS269_ST_OFFS_DEEP,
|
| 178 | };
|
| 179 |
|
| 180 | enum iqs269_th_offs {
|
| 181 | IQS269_TH_OFFS_PROX,
|
| 182 | IQS269_TH_OFFS_TOUCH,
|
| 183 | IQS269_TH_OFFS_DEEP,
|
| 184 | };
|
| 185 |
|
| 186 | enum iqs269_event_id {
|
| 187 | IQS269_EVENT_PROX_DN,
|
| 188 | IQS269_EVENT_PROX_UP,
|
| 189 | IQS269_EVENT_TOUCH_DN,
|
| 190 | IQS269_EVENT_TOUCH_UP,
|
| 191 | IQS269_EVENT_DEEP_DN,
|
| 192 | IQS269_EVENT_DEEP_UP,
|
| 193 | };
|
| 194 |
|
| 195 | enum iqs269_slider_id {
|
| 196 | IQS269_SLIDER_NONE,
|
| 197 | IQS269_SLIDER_KEY,
|
| 198 | IQS269_SLIDER_RAW,
|
| 199 | };
|
| 200 |
|
| 201 | enum iqs269_gesture_id {
|
| 202 | IQS269_GESTURE_TAP,
|
| 203 | IQS269_GESTURE_HOLD,
|
| 204 | IQS269_GESTURE_FLICK_POS,
|
| 205 | IQS269_GESTURE_FLICK_NEG,
|
| 206 | IQS269_NUM_GESTURES,
|
| 207 | };
|
| 208 |
|
| 209 | struct iqs269_switch_desc {
|
| 210 | unsigned int code;
|
| 211 | bool enabled;
|
| 212 | };
|
| 213 |
|
| 214 | struct iqs269_event_desc {
|
| 215 | const char *name;
|
| 216 | enum iqs269_st_offs st_offs;
|
| 217 | enum iqs269_th_offs th_offs;
|
| 218 | bool dir_up;
|
| 219 | u8 mask;
|
| 220 | };
|
| 221 |
|
| 222 | static const struct iqs269_event_desc iqs269_events[] = {
|
| 223 | [IQS269_EVENT_PROX_DN] = {
|
| 224 | .name = "event-prox",
|
| 225 | .st_offs = IQS269_ST_OFFS_PROX,
|
| 226 | .th_offs = IQS269_TH_OFFS_PROX,
|
| 227 | .mask = IQS269_EVENT_MASK_PROX,
|
| 228 | },
|
| 229 | [IQS269_EVENT_PROX_UP] = {
|
| 230 | .name = "event-prox-alt",
|
| 231 | .st_offs = IQS269_ST_OFFS_PROX,
|
| 232 | .th_offs = IQS269_TH_OFFS_PROX,
|
| 233 | .dir_up = true,
|
| 234 | .mask = IQS269_EVENT_MASK_PROX,
|
| 235 | },
|
| 236 | [IQS269_EVENT_TOUCH_DN] = {
|
| 237 | .name = "event-touch",
|
| 238 | .st_offs = IQS269_ST_OFFS_TOUCH,
|
| 239 | .th_offs = IQS269_TH_OFFS_TOUCH,
|
| 240 | .mask = IQS269_EVENT_MASK_TOUCH,
|
| 241 | },
|
| 242 | [IQS269_EVENT_TOUCH_UP] = {
|
| 243 | .name = "event-touch-alt",
|
| 244 | .st_offs = IQS269_ST_OFFS_TOUCH,
|
| 245 | .th_offs = IQS269_TH_OFFS_TOUCH,
|
| 246 | .dir_up = true,
|
| 247 | .mask = IQS269_EVENT_MASK_TOUCH,
|
| 248 | },
|
| 249 | [IQS269_EVENT_DEEP_DN] = {
|
| 250 | .name = "event-deep",
|
| 251 | .st_offs = IQS269_ST_OFFS_DEEP,
|
| 252 | .th_offs = IQS269_TH_OFFS_DEEP,
|
| 253 | .mask = IQS269_EVENT_MASK_DEEP,
|
| 254 | },
|
| 255 | [IQS269_EVENT_DEEP_UP] = {
|
| 256 | .name = "event-deep-alt",
|
| 257 | .st_offs = IQS269_ST_OFFS_DEEP,
|
| 258 | .th_offs = IQS269_TH_OFFS_DEEP,
|
| 259 | .dir_up = true,
|
| 260 | .mask = IQS269_EVENT_MASK_DEEP,
|
| 261 | },
|
| 262 | };
|
| 263 |
|
| 264 | struct iqs269_ver_info {
|
| 265 | u8 prod_num;
|
| 266 | u8 sw_num;
|
| 267 | u8 hw_num;
|
| 268 | u8 fw_num;
|
| 269 | } __packed;
|
| 270 |
|
| 271 | struct iqs269_ch_reg {
|
| 272 | u8 rx_enable;
|
| 273 | u8 tx_enable;
|
| 274 | __be16 engine_a;
|
| 275 | __be16 engine_b;
|
| 276 | __be16 ati_comp;
|
| 277 | u8 thresh[3];
|
| 278 | u8 hyst;
|
| 279 | u8 assoc_select;
|
| 280 | u8 assoc_weight;
|
| 281 | } __packed;
|
| 282 |
|
| 283 | struct iqs269_sys_reg {
|
| 284 | __be16 general;
|
| 285 | u8 active;
|
| 286 | u8 filter;
|
| 287 | u8 reseed;
|
| 288 | u8 event_mask;
|
| 289 | u8 rate_np;
|
| 290 | u8 rate_lp;
|
| 291 | u8 rate_ulp;
|
| 292 | u8 timeout_pwr;
|
| 293 | u8 timeout_rdy;
|
| 294 | u8 timeout_lta;
|
| 295 | __be16 misc_a;
|
| 296 | __be16 misc_b;
|
| 297 | u8 blocking;
|
| 298 | u8 padding;
|
| 299 | u8 slider_select[IQS269_NUM_SL];
|
| 300 | u8 timeout_tap;
|
| 301 | u8 timeout_swipe;
|
| 302 | u8 thresh_swipe;
|
| 303 | u8 redo_ati;
|
| 304 | struct iqs269_ch_reg ch_reg[IQS269_NUM_CH];
|
| 305 | } __packed;
|
| 306 |
|
| 307 | struct iqs269_flags {
|
| 308 | __be16 system;
|
| 309 | u8 gesture;
|
| 310 | u8 padding;
|
| 311 | u8 states[4];
|
| 312 | } __packed;
|
| 313 |
|
| 314 | struct iqs269_private {
|
| 315 | struct i2c_client *client;
|
| 316 | struct regmap *regmap;
|
| 317 | struct mutex lock;
|
| 318 | struct iqs269_switch_desc switches[ARRAY_SIZE(iqs269_events)];
|
| 319 | struct iqs269_ver_info ver_info;
|
| 320 | struct iqs269_sys_reg sys_reg;
|
| 321 | struct completion ati_done;
|
| 322 | struct input_dev *keypad;
|
| 323 | struct input_dev *slider[IQS269_NUM_SL];
|
| 324 | unsigned int keycode[ARRAY_SIZE(iqs269_events) * IQS269_NUM_CH];
|
| 325 | unsigned int sl_code[IQS269_NUM_SL][IQS269_NUM_GESTURES];
|
| 326 | unsigned int otp_option;
|
| 327 | unsigned int ch_num;
|
| 328 | bool hall_enable;
|
| 329 | bool ati_current;
|
| 330 | };
|
| 331 |
|
| 332 | static enum iqs269_slider_id iqs269_slider_type(struct iqs269_private *iqs269,
|
| 333 | int slider_num)
|
| 334 | {
|
| 335 | int i;
|
| 336 |
|
| 337 | |
| 338 | * Slider 1 is unavailable if the touch-and-hold option is enabled via
|
| 339 | * OTP. In that case, the channel selection register is repurposed for
|
| 340 | * the touch-and-hold timer ceiling.
|
| 341 |
|
| 342 | if (slider_num && (iqs269->otp_option & IQS269_OTP_OPTION_HOLD))
|
| 343 | return IQS269_SLIDER_NONE;
|
| 344 |
|
| 345 | if (!iqs269->sys_reg.slider_select[slider_num])
|
| 346 | return IQS269_SLIDER_NONE;
|
| 347 |
|
| 348 | for (i = 0; i < IQS269_NUM_GESTURES; i++)
|
| 349 | if (iqs269->sl_code[slider_num][i] != KEY_RESERVED)
|
| 350 | return IQS269_SLIDER_KEY;
|
| 351 |
|
| 352 | return IQS269_SLIDER_RAW;
|
| 353 | }
|
| 354 |
|
| 355 | static int iqs269_ati_mode_set(struct iqs269_private *iqs269,
|
| 356 | unsigned int ch_num, unsigned int mode)
|
| 357 | {
|
| 358 | struct iqs269_ch_reg *ch_reg = iqs269->sys_reg.ch_reg;
|
| 359 | u16 engine_a;
|
| 360 |
|
| 361 | if (ch_num >= IQS269_NUM_CH)
|
| 362 | return -EINVAL;
|
| 363 |
|
| 364 | if (mode > IQS269_CHx_ENG_A_ATI_MODE_MAX)
|
| 365 | return -EINVAL;
|
| 366 |
|
| 367 | guard(mutex)(&iqs269->lock);
|
| 368 |
|
| 369 | engine_a = be16_to_cpu(ch_reg[ch_num].engine_a);
|
| 370 |
|
| 371 | engine_a &= ~IQS269_CHx_ENG_A_ATI_MODE_MASK;
|
| 372 | engine_a |= (mode << IQS269_CHx_ENG_A_ATI_MODE_SHIFT);
|
| 373 |
|
| 374 | ch_reg[ch_num].engine_a = cpu_to_be16(engine_a);
|
| 375 | iqs269->ati_current = false;
|
| 376 |
|
| 377 | return 0;
|
| 378 | }
|
| 379 |
|
| 380 | static int iqs269_ati_mode_get(struct iqs269_private *iqs269,
|
| 381 | unsigned int ch_num, unsigned int *mode)
|
| 382 | {
|
| 383 | struct iqs269_ch_reg *ch_reg = iqs269->sys_reg.ch_reg;
|
| 384 | u16 engine_a;
|
| 385 |
|
| 386 | if (ch_num >= IQS269_NUM_CH)
|
| 387 | return -EINVAL;
|
| 388 |
|
| 389 | guard(mutex)(&iqs269->lock);
|
| 390 |
|
| 391 | engine_a = be16_to_cpu(ch_reg[ch_num].engine_a);
|
| 392 |
|
| 393 | engine_a &= IQS269_CHx_ENG_A_ATI_MODE_MASK;
|
| 394 | *mode = (engine_a >> IQS269_CHx_ENG_A_ATI_MODE_SHIFT);
|
| 395 |
|
| 396 | return 0;
|
| 397 | }
|
| 398 |
|
| 399 | static int iqs269_ati_base_set(struct iqs269_private *iqs269,
|
| 400 | unsigned int ch_num, unsigned int base)
|
| 401 | {
|
| 402 | struct iqs269_ch_reg *ch_reg = iqs269->sys_reg.ch_reg;
|
| 403 | u16 engine_b;
|
| 404 |
|
| 405 | if (ch_num >= IQS269_NUM_CH)
|
| 406 | return -EINVAL;
|
| 407 |
|
| 408 | switch (base) {
|
| 409 | case 75:
|
| 410 | base = IQS269_CHx_ENG_B_ATI_BASE_75;
|
| 411 | break;
|
| 412 |
|
| 413 | case 100:
|
| 414 | base = IQS269_CHx_ENG_B_ATI_BASE_100;
|
| 415 | break;
|
| 416 |
|
| 417 | case 150:
|
| 418 | base = IQS269_CHx_ENG_B_ATI_BASE_150;
|
| 419 | break;
|
| 420 |
|
| 421 | case 200:
|
| 422 | base = IQS269_CHx_ENG_B_ATI_BASE_200;
|
| 423 | break;
|
| 424 |
|
| 425 | default:
|
| 426 | return -EINVAL;
|
| 427 | }
|
| 428 |
|
| 429 | guard(mutex)(&iqs269->lock);
|
| 430 |
|
| 431 | engine_b = be16_to_cpu(ch_reg[ch_num].engine_b);
|
| 432 |
|
| 433 | engine_b &= ~IQS269_CHx_ENG_B_ATI_BASE_MASK;
|
| 434 | engine_b |= base;
|
| 435 |
|
| 436 | ch_reg[ch_num].engine_b = cpu_to_be16(engine_b);
|
| 437 | iqs269->ati_current = false;
|
| 438 |
|
| 439 | return 0;
|
| 440 | }
|
| 441 |
|
| 442 | static int iqs269_ati_base_get(struct iqs269_private *iqs269,
|
| 443 | unsigned int ch_num, unsigned int *base)
|
| 444 | {
|
| 445 | struct iqs269_ch_reg *ch_reg = iqs269->sys_reg.ch_reg;
|
| 446 | u16 engine_b;
|
| 447 |
|
| 448 | if (ch_num >= IQS269_NUM_CH)
|
| 449 | return -EINVAL;
|
| 450 |
|
| 451 | guard(mutex)(&iqs269->lock);
|
| 452 |
|
| 453 | engine_b = be16_to_cpu(ch_reg[ch_num].engine_b);
|
| 454 |
|
| 455 | switch (engine_b & IQS269_CHx_ENG_B_ATI_BASE_MASK) {
|
| 456 | case IQS269_CHx_ENG_B_ATI_BASE_75:
|
| 457 | *base = 75;
|
| 458 | return 0;
|
| 459 |
|
| 460 | case IQS269_CHx_ENG_B_ATI_BASE_100:
|
| 461 | *base = 100;
|
| 462 | return 0;
|
| 463 |
|
| 464 | case IQS269_CHx_ENG_B_ATI_BASE_150:
|
| 465 | *base = 150;
|
| 466 | return 0;
|
| 467 |
|
| 468 | case IQS269_CHx_ENG_B_ATI_BASE_200:
|
| 469 | *base = 200;
|
| 470 | return 0;
|
| 471 |
|
| 472 | default:
|
| 473 | return -EINVAL;
|
| 474 | }
|
| 475 | }
|
| 476 |
|
| 477 | static int iqs269_ati_target_set(struct iqs269_private *iqs269,
|
| 478 | unsigned int ch_num, unsigned int target)
|
| 479 | {
|
| 480 | struct iqs269_ch_reg *ch_reg = iqs269->sys_reg.ch_reg;
|
| 481 | u16 engine_b;
|
| 482 |
|
| 483 | if (ch_num >= IQS269_NUM_CH)
|
| 484 | return -EINVAL;
|
| 485 |
|
| 486 | if (target > IQS269_CHx_ENG_B_ATI_TARGET_MAX)
|
| 487 | return -EINVAL;
|
| 488 |
|
| 489 | guard(mutex)(&iqs269->lock);
|
| 490 |
|
| 491 | engine_b = be16_to_cpu(ch_reg[ch_num].engine_b);
|
| 492 |
|
| 493 | engine_b &= ~IQS269_CHx_ENG_B_ATI_TARGET_MASK;
|
| 494 | engine_b |= target / 32;
|
| 495 |
|
| 496 | ch_reg[ch_num].engine_b = cpu_to_be16(engine_b);
|
| 497 | iqs269->ati_current = false;
|
| 498 |
|
| 499 | return 0;
|
| 500 | }
|
| 501 |
|
| 502 | static int iqs269_ati_target_get(struct iqs269_private *iqs269,
|
| 503 | unsigned int ch_num, unsigned int *target)
|
| 504 | {
|
| 505 | struct iqs269_ch_reg *ch_reg = iqs269->sys_reg.ch_reg;
|
| 506 | u16 engine_b;
|
| 507 |
|
| 508 | if (ch_num >= IQS269_NUM_CH)
|
| 509 | return -EINVAL;
|
| 510 |
|
| 511 | guard(mutex)(&iqs269->lock);
|
| 512 |
|
| 513 | engine_b = be16_to_cpu(ch_reg[ch_num].engine_b);
|
| 514 | *target = (engine_b & IQS269_CHx_ENG_B_ATI_TARGET_MASK) * 32;
|
| 515 |
|
| 516 | return 0;
|
| 517 | }
|
| 518 |
|
| 519 | static int iqs269_parse_mask(const struct fwnode_handle *fwnode,
|
| 520 | const char *propname, u8 *mask)
|
| 521 | {
|
| 522 | unsigned int val[IQS269_NUM_CH];
|
| 523 | int count, error, i;
|
| 524 |
|
| 525 | count = fwnode_property_count_u32(fwnode, propname);
|
| 526 | if (count < 0)
|
| 527 | return 0;
|
| 528 |
|
| 529 | if (count > IQS269_NUM_CH)
|
| 530 | return -EINVAL;
|
| 531 |
|
| 532 | error = fwnode_property_read_u32_array(fwnode, propname, val, count);
|
| 533 | if (error)
|
| 534 | return error;
|
| 535 |
|
| 536 | *mask = 0;
|
| 537 |
|
| 538 | for (i = 0; i < count; i++) {
|
| 539 | if (val[i] >= IQS269_NUM_CH)
|
| 540 | return -EINVAL;
|
| 541 |
|
| 542 | *mask |= BIT(val[i]);
|
| 543 | }
|
| 544 |
|
| 545 | return 0;
|
| 546 | }
|
| 547 |
|
| 548 | static int iqs269_parse_chan(struct iqs269_private *iqs269,
|
| 549 | const struct fwnode_handle *ch_node)
|
| 550 | {
|
| 551 | struct i2c_client *client = iqs269->client;
|
| 552 | struct iqs269_ch_reg *ch_reg;
|
| 553 | u16 engine_a, engine_b;
|
| 554 | unsigned int reg, val;
|
| 555 | int error, i;
|
| 556 |
|
| 557 | error = fwnode_property_read_u32(ch_node, "reg", ®);
|
| 558 | if (error) {
|
| 559 | dev_err(&client->dev, "Failed to read channel number: %d\n",
|
| 560 | error);
|
| 561 | return error;
|
| 562 | } else if (reg >= IQS269_NUM_CH) {
|
| 563 | dev_err(&client->dev, "Invalid channel number: %u\n", reg);
|
| 564 | return -EINVAL;
|
| 565 | }
|
| 566 |
|
| 567 | iqs269->sys_reg.active |= BIT(reg);
|
| 568 | if (!fwnode_property_present(ch_node, "azoteq,reseed-disable"))
|
| 569 | iqs269->sys_reg.reseed |= BIT(reg);
|
| 570 |
|
| 571 | if (fwnode_property_present(ch_node, "azoteq,blocking-enable"))
|
| 572 | iqs269->sys_reg.blocking |= BIT(reg);
|
| 573 |
|
| 574 | if (fwnode_property_present(ch_node, "azoteq,slider0-select"))
|
| 575 | iqs269->sys_reg.slider_select[0] |= BIT(reg);
|
| 576 |
|
| 577 | if (fwnode_property_present(ch_node, "azoteq,slider1-select") &&
|
| 578 | !(iqs269->otp_option & IQS269_OTP_OPTION_HOLD))
|
| 579 | iqs269->sys_reg.slider_select[1] |= BIT(reg);
|
| 580 |
|
| 581 | ch_reg = &iqs269->sys_reg.ch_reg[reg];
|
| 582 |
|
| 583 | error = iqs269_parse_mask(ch_node, "azoteq,rx-enable",
|
| 584 | &ch_reg->rx_enable);
|
| 585 | if (error) {
|
| 586 | dev_err(&client->dev, "Invalid channel %u RX enable mask: %d\n",
|
| 587 | reg, error);
|
| 588 | return error;
|
| 589 | }
|
| 590 |
|
| 591 | error = iqs269_parse_mask(ch_node, "azoteq,tx-enable",
|
| 592 | &ch_reg->tx_enable);
|
| 593 | if (error) {
|
| 594 | dev_err(&client->dev, "Invalid channel %u TX enable mask: %d\n",
|
| 595 | reg, error);
|
| 596 | return error;
|
| 597 | }
|
| 598 |
|
| 599 | engine_a = be16_to_cpu(ch_reg->engine_a);
|
| 600 | engine_b = be16_to_cpu(ch_reg->engine_b);
|
| 601 |
|
| 602 | engine_a |= IQS269_CHx_ENG_A_MEAS_CAP_SIZE;
|
| 603 | if (fwnode_property_present(ch_node, "azoteq,meas-cap-decrease"))
|
| 604 | engine_a &= ~IQS269_CHx_ENG_A_MEAS_CAP_SIZE;
|
| 605 |
|
| 606 | engine_a |= IQS269_CHx_ENG_A_RX_GND_INACTIVE;
|
| 607 | if (fwnode_property_present(ch_node, "azoteq,rx-float-inactive"))
|
| 608 | engine_a &= ~IQS269_CHx_ENG_A_RX_GND_INACTIVE;
|
| 609 |
|
| 610 | engine_a &= ~IQS269_CHx_ENG_A_LOCAL_CAP_SIZE;
|
| 611 | engine_b &= ~IQS269_CHx_ENG_B_LOCAL_CAP_ENABLE;
|
| 612 | if (!fwnode_property_read_u32(ch_node, "azoteq,local-cap-size", &val)) {
|
| 613 | switch (val) {
|
| 614 | case IQS269_LOCAL_CAP_SIZE_0:
|
| 615 | break;
|
| 616 |
|
| 617 | case IQS269_LOCAL_CAP_SIZE_GLOBAL_0pF5:
|
| 618 | engine_a |= IQS269_CHx_ENG_A_LOCAL_CAP_SIZE;
|
| 619 | fallthrough;
|
| 620 |
|
| 621 | case IQS269_LOCAL_CAP_SIZE_GLOBAL_ONLY:
|
| 622 | engine_b |= IQS269_CHx_ENG_B_LOCAL_CAP_ENABLE;
|
| 623 | break;
|
| 624 |
|
| 625 | default:
|
| 626 | dev_err(&client->dev,
|
| 627 | "Invalid channel %u local cap. size: %u\n", reg,
|
| 628 | val);
|
| 629 | return -EINVAL;
|
| 630 | }
|
| 631 | }
|
| 632 |
|
| 633 | engine_a &= ~IQS269_CHx_ENG_A_INV_LOGIC;
|
| 634 | if (fwnode_property_present(ch_node, "azoteq,invert-enable"))
|
| 635 | engine_a |= IQS269_CHx_ENG_A_INV_LOGIC;
|
| 636 |
|
| 637 | if (!fwnode_property_read_u32(ch_node, "azoteq,proj-bias", &val)) {
|
| 638 | if (val > IQS269_CHx_ENG_A_PROJ_BIAS_MAX) {
|
| 639 | dev_err(&client->dev,
|
| 640 | "Invalid channel %u bias current: %u\n", reg,
|
| 641 | val);
|
| 642 | return -EINVAL;
|
| 643 | }
|
| 644 |
|
| 645 | engine_a &= ~IQS269_CHx_ENG_A_PROJ_BIAS_MASK;
|
| 646 | engine_a |= (val << IQS269_CHx_ENG_A_PROJ_BIAS_SHIFT);
|
| 647 | }
|
| 648 |
|
| 649 | if (!fwnode_property_read_u32(ch_node, "azoteq,sense-mode", &val)) {
|
| 650 | if (val > IQS269_CHx_ENG_A_SENSE_MODE_MAX) {
|
| 651 | dev_err(&client->dev,
|
| 652 | "Invalid channel %u sensing mode: %u\n", reg,
|
| 653 | val);
|
| 654 | return -EINVAL;
|
| 655 | }
|
| 656 |
|
| 657 | engine_a &= ~IQS269_CHx_ENG_A_SENSE_MODE_MASK;
|
| 658 | engine_a |= val;
|
| 659 | }
|
| 660 |
|
| 661 | if (!fwnode_property_read_u32(ch_node, "azoteq,sense-freq", &val)) {
|
| 662 | if (val > IQS269_CHx_ENG_B_SENSE_FREQ_MAX) {
|
| 663 | dev_err(&client->dev,
|
| 664 | "Invalid channel %u sensing frequency: %u\n",
|
| 665 | reg, val);
|
| 666 | return -EINVAL;
|
| 667 | }
|
| 668 |
|
| 669 | engine_b &= ~IQS269_CHx_ENG_B_SENSE_FREQ_MASK;
|
| 670 | engine_b |= (val << IQS269_CHx_ENG_B_SENSE_FREQ_SHIFT);
|
| 671 | }
|
| 672 |
|
| 673 | engine_b &= ~IQS269_CHx_ENG_B_STATIC_ENABLE;
|
| 674 | if (fwnode_property_present(ch_node, "azoteq,static-enable"))
|
| 675 | engine_b |= IQS269_CHx_ENG_B_STATIC_ENABLE;
|
| 676 |
|
| 677 | ch_reg->engine_a = cpu_to_be16(engine_a);
|
| 678 | ch_reg->engine_b = cpu_to_be16(engine_b);
|
| 679 |
|
| 680 | if (!fwnode_property_read_u32(ch_node, "azoteq,ati-mode", &val)) {
|
| 681 | error = iqs269_ati_mode_set(iqs269, reg, val);
|
| 682 | if (error) {
|
| 683 | dev_err(&client->dev,
|
| 684 | "Invalid channel %u ATI mode: %u\n", reg, val);
|
| 685 | return error;
|
| 686 | }
|
| 687 | }
|
| 688 |
|
| 689 | if (!fwnode_property_read_u32(ch_node, "azoteq,ati-base", &val)) {
|
| 690 | error = iqs269_ati_base_set(iqs269, reg, val);
|
| 691 | if (error) {
|
| 692 | dev_err(&client->dev,
|
| 693 | "Invalid channel %u ATI base: %u\n", reg, val);
|
| 694 | return error;
|
| 695 | }
|
| 696 | }
|
| 697 |
|
| 698 | if (!fwnode_property_read_u32(ch_node, "azoteq,ati-target", &val)) {
|
| 699 | error = iqs269_ati_target_set(iqs269, reg, val);
|
| 700 | if (error) {
|
| 701 | dev_err(&client->dev,
|
| 702 | "Invalid channel %u ATI target: %u\n", reg,
|
| 703 | val);
|
| 704 | return error;
|
| 705 | }
|
| 706 | }
|
| 707 |
|
| 708 | error = iqs269_parse_mask(ch_node, "azoteq,assoc-select",
|
| 709 | &ch_reg->assoc_select);
|
| 710 | if (error) {
|
| 711 | dev_err(&client->dev, "Invalid channel %u association: %d\n",
|
| 712 | reg, error);
|
| 713 | return error;
|
| 714 | }
|
| 715 |
|
| 716 | if (!fwnode_property_read_u32(ch_node, "azoteq,assoc-weight", &val)) {
|
| 717 | if (val > IQS269_CHx_WEIGHT_MAX) {
|
| 718 | dev_err(&client->dev,
|
| 719 | "Invalid channel %u associated weight: %u\n",
|
| 720 | reg, val);
|
| 721 | return -EINVAL;
|
| 722 | }
|
| 723 |
|
| 724 | ch_reg->assoc_weight = val;
|
| 725 | }
|
| 726 |
|
| 727 | for (i = 0; i < ARRAY_SIZE(iqs269_events); i++) {
|
| 728 | struct fwnode_handle *ev_node __free(fwnode_handle) =
|
| 729 | fwnode_get_named_child_node(ch_node,
|
| 730 | iqs269_events[i].name);
|
| 731 | if (!ev_node)
|
| 732 | continue;
|
| 733 |
|
| 734 | if (!fwnode_property_read_u32(ev_node, "azoteq,thresh", &val)) {
|
| 735 | if (val > IQS269_CHx_THRESH_MAX) {
|
| 736 | dev_err(&client->dev,
|
| 737 | "Invalid channel %u threshold: %u\n",
|
| 738 | reg, val);
|
| 739 | return -EINVAL;
|
| 740 | }
|
| 741 |
|
| 742 | ch_reg->thresh[iqs269_events[i].th_offs] = val;
|
| 743 | }
|
| 744 |
|
| 745 | if (!fwnode_property_read_u32(ev_node, "azoteq,hyst", &val)) {
|
| 746 | u8 *hyst = &ch_reg->hyst;
|
| 747 |
|
| 748 | if (val > IQS269_CHx_HYST_MAX) {
|
| 749 | dev_err(&client->dev,
|
| 750 | "Invalid channel %u hysteresis: %u\n",
|
| 751 | reg, val);
|
| 752 | return -EINVAL;
|
| 753 | }
|
| 754 |
|
| 755 | if (i == IQS269_EVENT_DEEP_DN ||
|
| 756 | i == IQS269_EVENT_DEEP_UP) {
|
| 757 | *hyst &= ~IQS269_CHx_HYST_DEEP_MASK;
|
| 758 | *hyst |= (val << IQS269_CHx_HYST_DEEP_SHIFT);
|
| 759 | } else if (i == IQS269_EVENT_TOUCH_DN ||
|
| 760 | i == IQS269_EVENT_TOUCH_UP) {
|
| 761 | *hyst &= ~IQS269_CHx_HYST_TOUCH_MASK;
|
| 762 | *hyst |= val;
|
| 763 | }
|
| 764 | }
|
| 765 |
|
| 766 | error = fwnode_property_read_u32(ev_node, "linux,code", &val);
|
| 767 | if (error == -EINVAL) {
|
| 768 | continue;
|
| 769 | } else if (error) {
|
| 770 | dev_err(&client->dev,
|
| 771 | "Failed to read channel %u code: %d\n", reg,
|
| 772 | error);
|
| 773 | return error;
|
| 774 | }
|
| 775 |
|
| 776 | switch (reg) {
|
| 777 | case IQS269_CHx_HALL_ACTIVE:
|
| 778 | if (iqs269->hall_enable) {
|
| 779 | iqs269->switches[i].code = val;
|
| 780 | iqs269->switches[i].enabled = true;
|
| 781 | }
|
| 782 | fallthrough;
|
| 783 |
|
| 784 | case IQS269_CHx_HALL_INACTIVE:
|
| 785 | if (iqs269->hall_enable)
|
| 786 | break;
|
| 787 | fallthrough;
|
| 788 |
|
| 789 | default:
|
| 790 | iqs269->keycode[i * IQS269_NUM_CH + reg] = val;
|
| 791 | }
|
| 792 |
|
| 793 | iqs269->sys_reg.event_mask &= ~iqs269_events[i].mask;
|
| 794 | }
|
| 795 |
|
| 796 | return 0;
|
| 797 | }
|
| 798 |
|
| 799 | static int iqs269_parse_prop(struct iqs269_private *iqs269)
|
| 800 | {
|
| 801 | struct iqs269_sys_reg *sys_reg = &iqs269->sys_reg;
|
| 802 | struct i2c_client *client = iqs269->client;
|
| 803 | u16 general, misc_a, misc_b;
|
| 804 | unsigned int val;
|
| 805 | int error;
|
| 806 |
|
| 807 | iqs269->hall_enable = device_property_present(&client->dev,
|
| 808 | "azoteq,hall-enable");
|
| 809 |
|
| 810 | error = regmap_raw_read(iqs269->regmap, IQS269_SYS_SETTINGS, sys_reg,
|
| 811 | sizeof(*sys_reg));
|
| 812 | if (error)
|
| 813 | return error;
|
| 814 |
|
| 815 | if (!device_property_read_u32(&client->dev, "azoteq,filt-str-lp-lta",
|
| 816 | &val)) {
|
| 817 | if (val > IQS269_FILT_STR_MAX) {
|
| 818 | dev_err(&client->dev, "Invalid filter strength: %u\n",
|
| 819 | val);
|
| 820 | return -EINVAL;
|
| 821 | }
|
| 822 |
|
| 823 | sys_reg->filter &= ~IQS269_FILT_STR_LP_LTA_MASK;
|
| 824 | sys_reg->filter |= (val << IQS269_FILT_STR_LP_LTA_SHIFT);
|
| 825 | }
|
| 826 |
|
| 827 | if (!device_property_read_u32(&client->dev, "azoteq,filt-str-lp-cnt",
|
| 828 | &val)) {
|
| 829 | if (val > IQS269_FILT_STR_MAX) {
|
| 830 | dev_err(&client->dev, "Invalid filter strength: %u\n",
|
| 831 | val);
|
| 832 | return -EINVAL;
|
| 833 | }
|
| 834 |
|
| 835 | sys_reg->filter &= ~IQS269_FILT_STR_LP_CNT_MASK;
|
| 836 | sys_reg->filter |= (val << IQS269_FILT_STR_LP_CNT_SHIFT);
|
| 837 | }
|
| 838 |
|
| 839 | if (!device_property_read_u32(&client->dev, "azoteq,filt-str-np-lta",
|
| 840 | &val)) {
|
| 841 | if (val > IQS269_FILT_STR_MAX) {
|
| 842 | dev_err(&client->dev, "Invalid filter strength: %u\n",
|
| 843 | val);
|
| 844 | return -EINVAL;
|
| 845 | }
|
| 846 |
|
| 847 | sys_reg->filter &= ~IQS269_FILT_STR_NP_LTA_MASK;
|
| 848 | sys_reg->filter |= (val << IQS269_FILT_STR_NP_LTA_SHIFT);
|
| 849 | }
|
| 850 |
|
| 851 | if (!device_property_read_u32(&client->dev, "azoteq,filt-str-np-cnt",
|
| 852 | &val)) {
|
| 853 | if (val > IQS269_FILT_STR_MAX) {
|
| 854 | dev_err(&client->dev, "Invalid filter strength: %u\n",
|
| 855 | val);
|
| 856 | return -EINVAL;
|
| 857 | }
|
| 858 |
|
| 859 | sys_reg->filter &= ~IQS269_FILT_STR_NP_CNT_MASK;
|
| 860 | sys_reg->filter |= val;
|
| 861 | }
|
| 862 |
|
| 863 | if (!device_property_read_u32(&client->dev, "azoteq,rate-np-ms",
|
| 864 | &val)) {
|
| 865 | if (val > IQS269_RATE_NP_MS_MAX) {
|
| 866 | dev_err(&client->dev, "Invalid report rate: %u\n", val);
|
| 867 | return -EINVAL;
|
| 868 | }
|
| 869 |
|
| 870 | sys_reg->rate_np = val;
|
| 871 | }
|
| 872 |
|
| 873 | if (!device_property_read_u32(&client->dev, "azoteq,rate-lp-ms",
|
| 874 | &val)) {
|
| 875 | if (val > IQS269_RATE_LP_MS_MAX) {
|
| 876 | dev_err(&client->dev, "Invalid report rate: %u\n", val);
|
| 877 | return -EINVAL;
|
| 878 | }
|
| 879 |
|
| 880 | sys_reg->rate_lp = val;
|
| 881 | }
|
| 882 |
|
| 883 | if (!device_property_read_u32(&client->dev, "azoteq,rate-ulp-ms",
|
| 884 | &val)) {
|
| 885 | if (val > IQS269_RATE_ULP_MS_MAX) {
|
| 886 | dev_err(&client->dev, "Invalid report rate: %u\n", val);
|
| 887 | return -EINVAL;
|
| 888 | }
|
| 889 |
|
| 890 | sys_reg->rate_ulp = val / 16;
|
| 891 | }
|
| 892 |
|
| 893 | if (!device_property_read_u32(&client->dev, "azoteq,timeout-pwr-ms",
|
| 894 | &val)) {
|
| 895 | if (val > IQS269_TIMEOUT_PWR_MS_MAX) {
|
| 896 | dev_err(&client->dev, "Invalid timeout: %u\n", val);
|
| 897 | return -EINVAL;
|
| 898 | }
|
| 899 |
|
| 900 | sys_reg->timeout_pwr = val / 512;
|
| 901 | }
|
| 902 |
|
| 903 | if (!device_property_read_u32(&client->dev, "azoteq,timeout-lta-ms",
|
| 904 | &val)) {
|
| 905 | if (val > IQS269_TIMEOUT_LTA_MS_MAX) {
|
| 906 | dev_err(&client->dev, "Invalid timeout: %u\n", val);
|
| 907 | return -EINVAL;
|
| 908 | }
|
| 909 |
|
| 910 | sys_reg->timeout_lta = val / 512;
|
| 911 | }
|
| 912 |
|
| 913 | misc_a = be16_to_cpu(sys_reg->misc_a);
|
| 914 | misc_b = be16_to_cpu(sys_reg->misc_b);
|
| 915 |
|
| 916 | misc_a &= ~IQS269_MISC_A_ATI_BAND_DISABLE;
|
| 917 | if (device_property_present(&client->dev, "azoteq,ati-band-disable"))
|
| 918 | misc_a |= IQS269_MISC_A_ATI_BAND_DISABLE;
|
| 919 |
|
| 920 | misc_a &= ~IQS269_MISC_A_ATI_LP_ONLY;
|
| 921 | if (device_property_present(&client->dev, "azoteq,ati-lp-only"))
|
| 922 | misc_a |= IQS269_MISC_A_ATI_LP_ONLY;
|
| 923 |
|
| 924 | misc_a &= ~IQS269_MISC_A_ATI_BAND_TIGHTEN;
|
| 925 | if (device_property_present(&client->dev, "azoteq,ati-band-tighten"))
|
| 926 | misc_a |= IQS269_MISC_A_ATI_BAND_TIGHTEN;
|
| 927 |
|
| 928 | misc_a &= ~IQS269_MISC_A_FILT_DISABLE;
|
| 929 | if (device_property_present(&client->dev, "azoteq,filt-disable"))
|
| 930 | misc_a |= IQS269_MISC_A_FILT_DISABLE;
|
| 931 |
|
| 932 | if (!device_property_read_u32(&client->dev, "azoteq,gpio3-select",
|
| 933 | &val)) {
|
| 934 | if (val >= IQS269_NUM_CH) {
|
| 935 | dev_err(&client->dev, "Invalid GPIO3 selection: %u\n",
|
| 936 | val);
|
| 937 | return -EINVAL;
|
| 938 | }
|
| 939 |
|
| 940 | misc_a &= ~IQS269_MISC_A_GPIO3_SELECT_MASK;
|
| 941 | misc_a |= (val << IQS269_MISC_A_GPIO3_SELECT_SHIFT);
|
| 942 | }
|
| 943 |
|
| 944 | misc_a &= ~IQS269_MISC_A_DUAL_DIR;
|
| 945 | if (device_property_present(&client->dev, "azoteq,dual-direction"))
|
| 946 | misc_a |= IQS269_MISC_A_DUAL_DIR;
|
| 947 |
|
| 948 | if (!device_property_read_u32(&client->dev, "azoteq,tx-freq", &val)) {
|
| 949 | if (val > IQS269_MISC_A_TX_FREQ_MAX) {
|
| 950 | dev_err(&client->dev,
|
| 951 | "Invalid excitation frequency: %u\n", val);
|
| 952 | return -EINVAL;
|
| 953 | }
|
| 954 |
|
| 955 | misc_a &= ~IQS269_MISC_A_TX_FREQ_MASK;
|
| 956 | misc_a |= (val << IQS269_MISC_A_TX_FREQ_SHIFT);
|
| 957 | }
|
| 958 |
|
| 959 | misc_a &= ~IQS269_MISC_A_GLOBAL_CAP_SIZE;
|
| 960 | if (device_property_present(&client->dev, "azoteq,global-cap-increase"))
|
| 961 | misc_a |= IQS269_MISC_A_GLOBAL_CAP_SIZE;
|
| 962 |
|
| 963 | if (!device_property_read_u32(&client->dev, "azoteq,reseed-select",
|
| 964 | &val)) {
|
| 965 | if (val > IQS269_MISC_B_RESEED_UI_SEL_MAX) {
|
| 966 | dev_err(&client->dev, "Invalid reseed selection: %u\n",
|
| 967 | val);
|
| 968 | return -EINVAL;
|
| 969 | }
|
| 970 |
|
| 971 | misc_b &= ~IQS269_MISC_B_RESEED_UI_SEL_MASK;
|
| 972 | misc_b |= (val << IQS269_MISC_B_RESEED_UI_SEL_SHIFT);
|
| 973 | }
|
| 974 |
|
| 975 | misc_b &= ~IQS269_MISC_B_TRACKING_UI_ENABLE;
|
| 976 | if (device_property_present(&client->dev, "azoteq,tracking-enable"))
|
| 977 | misc_b |= IQS269_MISC_B_TRACKING_UI_ENABLE;
|
| 978 |
|
| 979 | if (!device_property_read_u32(&client->dev, "azoteq,filt-str-slider",
|
| 980 | &val)) {
|
| 981 | if (val > IQS269_FILT_STR_MAX) {
|
| 982 | dev_err(&client->dev, "Invalid filter strength: %u\n",
|
| 983 | val);
|
| 984 | return -EINVAL;
|
| 985 | }
|
| 986 |
|
| 987 | misc_b &= ~IQS269_MISC_B_FILT_STR_SLIDER;
|
| 988 | misc_b |= val;
|
| 989 | }
|
| 990 |
|
| 991 | sys_reg->misc_a = cpu_to_be16(misc_a);
|
| 992 | sys_reg->misc_b = cpu_to_be16(misc_b);
|
| 993 |
|
| 994 | sys_reg->active = 0;
|
| 995 | sys_reg->reseed = 0;
|
| 996 |
|
| 997 | sys_reg->blocking = 0;
|
| 998 |
|
| 999 | sys_reg->slider_select[0] = 0;
|
| 1000 |
|
| 1001 | |
| 1002 | * If configured via OTP to do so, the device asserts a pulse on the
|
| 1003 | * GPIO4 pin for approximately 60 ms once a selected channel is held
|
| 1004 | * in a state of touch for a configurable length of time.
|
| 1005 | *
|
| 1006 | * In that case, the register used for slider 1 channel selection is
|
| 1007 | * repurposed for the touch-and-hold timer ceiling.
|
| 1008 |
|
| 1009 | if (iqs269->otp_option & IQS269_OTP_OPTION_HOLD) {
|
| 1010 | if (!device_property_read_u32(&client->dev,
|
| 1011 | "azoteq,touch-hold-ms", &val)) {
|
| 1012 | if (val < IQS269_TOUCH_HOLD_MS_MIN ||
|
| 1013 | val > IQS269_TOUCH_HOLD_MS_MAX) {
|
| 1014 | dev_err(&client->dev,
|
| 1015 | "Invalid touch-and-hold ceiling: %u\n",
|
| 1016 | val);
|
| 1017 | return -EINVAL;
|
| 1018 | }
|
| 1019 |
|
| 1020 | sys_reg->slider_select[1] = val / 256;
|
| 1021 | } else if (iqs269->ver_info.fw_num < IQS269_VER_INFO_FW_NUM_3) {
|
| 1022 | |
| 1023 | * The default touch-and-hold timer ceiling initially
|
| 1024 | * read from early revisions of silicon is invalid if
|
| 1025 | * the device experienced a soft reset between power-
|
| 1026 | * on and the read operation.
|
| 1027 | *
|
| 1028 | * To protect against this case, explicitly cache the
|
| 1029 | * default value so that it is restored each time the
|
| 1030 | * device is re-initialized.
|
| 1031 |
|
| 1032 | sys_reg->slider_select[1] = IQS269_TOUCH_HOLD_DEFAULT;
|
| 1033 | }
|
| 1034 | } else {
|
| 1035 | sys_reg->slider_select[1] = 0;
|
| 1036 | }
|
| 1037 |
|
| 1038 | sys_reg->event_mask = ~((u8)IQS269_EVENT_MASK_SYS);
|
| 1039 |
|
| 1040 | device_for_each_child_node_scoped(&client->dev, ch_node) {
|
| 1041 | error = iqs269_parse_chan(iqs269, ch_node);
|
| 1042 | if (error)
|
| 1043 | return error;
|
| 1044 | }
|
| 1045 |
|
| 1046 | |
| 1047 | * Volunteer all active channels to participate in ATI when REDO-ATI is
|
| 1048 | * manually triggered.
|
| 1049 |
|
| 1050 | sys_reg->redo_ati = sys_reg->active;
|
| 1051 |
|
| 1052 | general = be16_to_cpu(sys_reg->general);
|
| 1053 |
|
| 1054 | if (device_property_present(&client->dev, "azoteq,clk-div"))
|
| 1055 | general |= IQS269_SYS_SETTINGS_CLK_DIV;
|
| 1056 |
|
| 1057 | |
| 1058 | * Configure the device to automatically switch between normal and low-
|
| 1059 | * power modes as a function of sensing activity. Ultra-low-power mode,
|
| 1060 | * if enabled, is reserved for suspend.
|
| 1061 |
|
| 1062 | general &= ~IQS269_SYS_SETTINGS_ULP_AUTO;
|
| 1063 | general &= ~IQS269_SYS_SETTINGS_DIS_AUTO;
|
| 1064 | general &= ~IQS269_SYS_SETTINGS_PWR_MODE_MASK;
|
| 1065 |
|
| 1066 | if (!device_property_read_u32(&client->dev, "azoteq,suspend-mode",
|
| 1067 | &val)) {
|
| 1068 | if (val > IQS269_SYS_SETTINGS_PWR_MODE_MAX) {
|
| 1069 | dev_err(&client->dev, "Invalid suspend mode: %u\n",
|
| 1070 | val);
|
| 1071 | return -EINVAL;
|
| 1072 | }
|
| 1073 |
|
| 1074 | general |= (val << IQS269_SYS_SETTINGS_PWR_MODE_SHIFT);
|
| 1075 | }
|
| 1076 |
|
| 1077 | if (!device_property_read_u32(&client->dev, "azoteq,ulp-update",
|
| 1078 | &val)) {
|
| 1079 | if (val > IQS269_SYS_SETTINGS_ULP_UPDATE_MAX) {
|
| 1080 | dev_err(&client->dev, "Invalid update rate: %u\n", val);
|
| 1081 | return -EINVAL;
|
| 1082 | }
|
| 1083 |
|
| 1084 | general &= ~IQS269_SYS_SETTINGS_ULP_UPDATE_MASK;
|
| 1085 | general |= (val << IQS269_SYS_SETTINGS_ULP_UPDATE_SHIFT);
|
| 1086 | }
|
| 1087 |
|
| 1088 | if (device_property_present(&client->dev, "linux,keycodes")) {
|
| 1089 | int scale = 1;
|
| 1090 | int count = device_property_count_u32(&client->dev,
|
| 1091 | "linux,keycodes");
|
| 1092 | if (count > IQS269_NUM_GESTURES * IQS269_NUM_SL) {
|
| 1093 | dev_err(&client->dev, "Too many keycodes present\n");
|
| 1094 | return -EINVAL;
|
| 1095 | } else if (count < 0) {
|
| 1096 | dev_err(&client->dev, "Failed to count keycodes: %d\n",
|
| 1097 | count);
|
| 1098 | return count;
|
| 1099 | }
|
| 1100 |
|
| 1101 | error = device_property_read_u32_array(&client->dev,
|
| 1102 | "linux,keycodes",
|
| 1103 | *iqs269->sl_code, count);
|
| 1104 | if (error) {
|
| 1105 | dev_err(&client->dev, "Failed to read keycodes: %d\n",
|
| 1106 | error);
|
| 1107 | return error;
|
| 1108 | }
|
| 1109 |
|
| 1110 | if (device_property_present(&client->dev,
|
| 1111 | "azoteq,gesture-swipe"))
|
| 1112 | general |= IQS269_SYS_SETTINGS_SLIDER_SWIPE;
|
| 1113 |
|
| 1114 | |
| 1115 | * Early revisions of silicon use a more granular step size for
|
| 1116 | * tap and swipe gesture timeouts; scale them appropriately.
|
| 1117 |
|
| 1118 | if (iqs269->ver_info.fw_num < IQS269_VER_INFO_FW_NUM_3)
|
| 1119 | scale = 4;
|
| 1120 |
|
| 1121 | if (!device_property_read_u32(&client->dev,
|
| 1122 | "azoteq,timeout-tap-ms", &val)) {
|
| 1123 | if (val > IQS269_TIMEOUT_TAP_MS_MAX / scale) {
|
| 1124 | dev_err(&client->dev, "Invalid timeout: %u\n",
|
| 1125 | val);
|
| 1126 | return -EINVAL;
|
| 1127 | }
|
| 1128 |
|
| 1129 | sys_reg->timeout_tap = val / (16 / scale);
|
| 1130 | }
|
| 1131 |
|
| 1132 | if (!device_property_read_u32(&client->dev,
|
| 1133 | "azoteq,timeout-swipe-ms",
|
| 1134 | &val)) {
|
| 1135 | if (val > IQS269_TIMEOUT_SWIPE_MS_MAX / scale) {
|
| 1136 | dev_err(&client->dev, "Invalid timeout: %u\n",
|
| 1137 | val);
|
| 1138 | return -EINVAL;
|
| 1139 | }
|
| 1140 |
|
| 1141 | sys_reg->timeout_swipe = val / (16 / scale);
|
| 1142 | }
|
| 1143 |
|
| 1144 | if (!device_property_read_u32(&client->dev,
|
| 1145 | "azoteq,thresh-swipe", &val)) {
|
| 1146 | if (val > IQS269_THRESH_SWIPE_MAX) {
|
| 1147 | dev_err(&client->dev, "Invalid threshold: %u\n",
|
| 1148 | val);
|
| 1149 | return -EINVAL;
|
| 1150 | }
|
| 1151 |
|
| 1152 | sys_reg->thresh_swipe = val;
|
| 1153 | }
|
| 1154 |
|
| 1155 | sys_reg->event_mask &= ~IQS269_EVENT_MASK_GESTURE;
|
| 1156 | }
|
| 1157 |
|
| 1158 | general &= ~IQS269_SYS_SETTINGS_RESEED_OFFSET;
|
| 1159 | if (device_property_present(&client->dev, "azoteq,reseed-offset"))
|
| 1160 | general |= IQS269_SYS_SETTINGS_RESEED_OFFSET;
|
| 1161 |
|
| 1162 | general |= IQS269_SYS_SETTINGS_EVENT_MODE;
|
| 1163 |
|
| 1164 | |
| 1165 | * As per the datasheet, enable streaming during normal-power mode if
|
| 1166 | * raw coordinates will be read from either slider. In that case, the
|
| 1167 | * device returns to event mode during low-power mode.
|
| 1168 |
|
| 1169 | if (iqs269_slider_type(iqs269, 0) == IQS269_SLIDER_RAW ||
|
| 1170 | iqs269_slider_type(iqs269, 1) == IQS269_SLIDER_RAW)
|
| 1171 | general |= IQS269_SYS_SETTINGS_EVENT_MODE_LP;
|
| 1172 |
|
| 1173 | general |= IQS269_SYS_SETTINGS_REDO_ATI;
|
| 1174 | general |= IQS269_SYS_SETTINGS_ACK_RESET;
|
| 1175 |
|
| 1176 | sys_reg->general = cpu_to_be16(general);
|
| 1177 |
|
| 1178 | return 0;
|
| 1179 | }
|
| 1180 |
|
| 1181 | static const struct reg_sequence iqs269_tws_init[] = {
|
| 1182 | { IQS269_TOUCH_HOLD_SLIDER_SEL, IQS269_TOUCH_HOLD_DEFAULT },
|
| 1183 | { 0xF0, 0x580F },
|
| 1184 | { 0xF0, 0x59EF },
|
| 1185 | };
|
| 1186 |
|
| 1187 | static int iqs269_dev_init(struct iqs269_private *iqs269)
|
| 1188 | {
|
| 1189 | int error;
|
| 1190 |
|
| 1191 | guard(mutex)(&iqs269->lock);
|
| 1192 |
|
| 1193 | |
| 1194 | * Early revisions of silicon require the following workaround in order
|
| 1195 | * to restore any OTP-enabled functionality after a soft reset.
|
| 1196 |
|
| 1197 | if (iqs269->otp_option == IQS269_OTP_OPTION_TWS &&
|
| 1198 | iqs269->ver_info.fw_num < IQS269_VER_INFO_FW_NUM_3) {
|
| 1199 | error = regmap_multi_reg_write(iqs269->regmap, iqs269_tws_init,
|
| 1200 | ARRAY_SIZE(iqs269_tws_init));
|
| 1201 | if (error)
|
| 1202 | return error;
|
| 1203 | }
|
| 1204 |
|
| 1205 | error = regmap_update_bits(iqs269->regmap, IQS269_HALL_UI,
|
| 1206 | IQS269_HALL_UI_ENABLE,
|
| 1207 | iqs269->hall_enable ? ~0 : 0);
|
| 1208 | if (error)
|
| 1209 | return error;
|
| 1210 |
|
| 1211 | error = regmap_raw_write(iqs269->regmap, IQS269_SYS_SETTINGS,
|
| 1212 | &iqs269->sys_reg, sizeof(iqs269->sys_reg));
|
| 1213 | if (error)
|
| 1214 | return error;
|
| 1215 |
|
| 1216 | |
| 1217 | * The following delay gives the device time to deassert its RDY output
|
| 1218 | * so as to prevent an interrupt from being serviced prematurely.
|
| 1219 |
|
| 1220 | usleep_range(2000, 2100);
|
| 1221 |
|
| 1222 | iqs269->ati_current = true;
|
| 1223 |
|
| 1224 | return 0;
|
| 1225 | }
|
| 1226 |
|
| 1227 | static int iqs269_input_init(struct iqs269_private *iqs269)
|
| 1228 | {
|
| 1229 | struct i2c_client *client = iqs269->client;
|
| 1230 | unsigned int sw_code, keycode;
|
| 1231 | int error, i, j;
|
| 1232 |
|
| 1233 | iqs269->keypad = devm_input_allocate_device(&client->dev);
|
| 1234 | if (!iqs269->keypad)
|
| 1235 | return -ENOMEM;
|
| 1236 |
|
| 1237 | iqs269->keypad->keycodemax = ARRAY_SIZE(iqs269->keycode);
|
| 1238 | iqs269->keypad->keycode = iqs269->keycode;
|
| 1239 | iqs269->keypad->keycodesize = sizeof(*iqs269->keycode);
|
| 1240 |
|
| 1241 | iqs269->keypad->name = "iqs269a_keypad";
|
| 1242 | iqs269->keypad->id.bustype = BUS_I2C;
|
| 1243 |
|
| 1244 | for (i = 0; i < ARRAY_SIZE(iqs269_events); i++) {
|
| 1245 | sw_code = iqs269->switches[i].code;
|
| 1246 |
|
| 1247 | for (j = 0; j < IQS269_NUM_CH; j++) {
|
| 1248 | keycode = iqs269->keycode[i * IQS269_NUM_CH + j];
|
| 1249 |
|
| 1250 | |
| 1251 | * Hall-effect sensing repurposes a pair of dedicated
|
| 1252 | * channels, only one of which reports events.
|
| 1253 |
|
| 1254 | switch (j) {
|
| 1255 | case IQS269_CHx_HALL_ACTIVE:
|
| 1256 | if (iqs269->hall_enable &&
|
| 1257 | iqs269->switches[i].enabled)
|
| 1258 | input_set_capability(iqs269->keypad,
|
| 1259 | EV_SW, sw_code);
|
| 1260 | fallthrough;
|
| 1261 |
|
| 1262 | case IQS269_CHx_HALL_INACTIVE:
|
| 1263 | if (iqs269->hall_enable)
|
| 1264 | continue;
|
| 1265 | fallthrough;
|
| 1266 |
|
| 1267 | default:
|
| 1268 | if (keycode != KEY_RESERVED)
|
| 1269 | input_set_capability(iqs269->keypad,
|
| 1270 | EV_KEY, keycode);
|
| 1271 | }
|
| 1272 | }
|
| 1273 | }
|
| 1274 |
|
| 1275 | for (i = 0; i < IQS269_NUM_SL; i++) {
|
| 1276 | if (iqs269_slider_type(iqs269, i) == IQS269_SLIDER_NONE)
|
| 1277 | continue;
|
| 1278 |
|
| 1279 | iqs269->slider[i] = devm_input_allocate_device(&client->dev);
|
| 1280 | if (!iqs269->slider[i])
|
| 1281 | return -ENOMEM;
|
| 1282 |
|
| 1283 | iqs269->slider[i]->keycodemax = ARRAY_SIZE(iqs269->sl_code[i]);
|
| 1284 | iqs269->slider[i]->keycode = iqs269->sl_code[i];
|
| 1285 | iqs269->slider[i]->keycodesize = sizeof(**iqs269->sl_code);
|
| 1286 |
|
| 1287 | iqs269->slider[i]->name = i ? "iqs269a_slider_1"
|
| 1288 | : "iqs269a_slider_0";
|
| 1289 | iqs269->slider[i]->id.bustype = BUS_I2C;
|
| 1290 |
|
| 1291 | for (j = 0; j < IQS269_NUM_GESTURES; j++)
|
| 1292 | if (iqs269->sl_code[i][j] != KEY_RESERVED)
|
| 1293 | input_set_capability(iqs269->slider[i], EV_KEY,
|
| 1294 | iqs269->sl_code[i][j]);
|
| 1295 |
|
| 1296 | |
| 1297 | * Present the slider as a narrow trackpad if one or more chan-
|
| 1298 | * nels have been selected to participate, but no gestures have
|
| 1299 | * been mapped to a keycode.
|
| 1300 |
|
| 1301 | if (iqs269_slider_type(iqs269, i) == IQS269_SLIDER_RAW) {
|
| 1302 | input_set_capability(iqs269->slider[i],
|
| 1303 | EV_KEY, BTN_TOUCH);
|
| 1304 | input_set_abs_params(iqs269->slider[i],
|
| 1305 | ABS_X, 0, 255, 0, 0);
|
| 1306 | }
|
| 1307 |
|
| 1308 | error = input_register_device(iqs269->slider[i]);
|
| 1309 | if (error) {
|
| 1310 | dev_err(&client->dev,
|
| 1311 | "Failed to register slider %d: %d\n", i, error);
|
| 1312 | return error;
|
| 1313 | }
|
| 1314 | }
|
| 1315 |
|
| 1316 | return 0;
|
| 1317 | }
|
| 1318 |
|
| 1319 | static int iqs269_report(struct iqs269_private *iqs269)
|
| 1320 | {
|
| 1321 | struct i2c_client *client = iqs269->client;
|
| 1322 | struct iqs269_flags flags;
|
| 1323 | unsigned int sw_code, keycode;
|
| 1324 | int error, i, j;
|
| 1325 | u8 slider_x[IQS269_NUM_SL];
|
| 1326 | u8 dir_mask, state;
|
| 1327 |
|
| 1328 | error = regmap_raw_read(iqs269->regmap, IQS269_SYS_FLAGS, &flags,
|
| 1329 | sizeof(flags));
|
| 1330 | if (error) {
|
| 1331 | dev_err(&client->dev, "Failed to read device status: %d\n",
|
| 1332 | error);
|
| 1333 | return error;
|
| 1334 | }
|
| 1335 |
|
| 1336 | |
| 1337 | * The device resets itself if its own watchdog bites, which can happen
|
| 1338 | * in the event of an I2C communication error. In this case, the device
|
| 1339 | * asserts a SHOW_RESET interrupt and all registers must be restored.
|
| 1340 |
|
| 1341 | if (be16_to_cpu(flags.system) & IQS269_SYS_FLAGS_SHOW_RESET) {
|
| 1342 | dev_err(&client->dev, "Unexpected device reset\n");
|
| 1343 |
|
| 1344 | error = iqs269_dev_init(iqs269);
|
| 1345 | if (error)
|
| 1346 | dev_err(&client->dev,
|
| 1347 | "Failed to re-initialize device: %d\n", error);
|
| 1348 |
|
| 1349 | return error;
|
| 1350 | }
|
| 1351 |
|
| 1352 | if (be16_to_cpu(flags.system) & IQS269_SYS_FLAGS_IN_ATI)
|
| 1353 | return 0;
|
| 1354 |
|
| 1355 | if (iqs269_slider_type(iqs269, 0) == IQS269_SLIDER_RAW ||
|
| 1356 | iqs269_slider_type(iqs269, 1) == IQS269_SLIDER_RAW) {
|
| 1357 | error = regmap_raw_read(iqs269->regmap, IQS269_SLIDER_X,
|
| 1358 | slider_x, sizeof(slider_x));
|
| 1359 | if (error) {
|
| 1360 | dev_err(&client->dev,
|
| 1361 | "Failed to read slider position: %d\n", error);
|
| 1362 | return error;
|
| 1363 | }
|
| 1364 | }
|
| 1365 |
|
| 1366 | for (i = 0; i < IQS269_NUM_SL; i++) {
|
| 1367 | flags.gesture >>= (i * IQS269_NUM_GESTURES);
|
| 1368 |
|
| 1369 | switch (iqs269_slider_type(iqs269, i)) {
|
| 1370 | case IQS269_SLIDER_NONE:
|
| 1371 | continue;
|
| 1372 |
|
| 1373 | case IQS269_SLIDER_KEY:
|
| 1374 | for (j = 0; j < IQS269_NUM_GESTURES; j++)
|
| 1375 | input_report_key(iqs269->slider[i],
|
| 1376 | iqs269->sl_code[i][j],
|
| 1377 | flags.gesture & BIT(j));
|
| 1378 |
|
| 1379 | if (!(flags.gesture & (BIT(IQS269_GESTURE_FLICK_NEG) |
|
| 1380 | BIT(IQS269_GESTURE_FLICK_POS) |
|
| 1381 | BIT(IQS269_GESTURE_TAP))))
|
| 1382 | break;
|
| 1383 |
|
| 1384 | input_sync(iqs269->slider[i]);
|
| 1385 |
|
| 1386 | |
| 1387 | * Momentary gestures are followed by a complementary
|
| 1388 | * release cycle so as to emulate a full keystroke.
|
| 1389 |
|
| 1390 | for (j = 0; j < IQS269_NUM_GESTURES; j++)
|
| 1391 | if (j != IQS269_GESTURE_HOLD)
|
| 1392 | input_report_key(iqs269->slider[i],
|
| 1393 | iqs269->sl_code[i][j],
|
| 1394 | 0);
|
| 1395 | break;
|
| 1396 |
|
| 1397 | case IQS269_SLIDER_RAW:
|
| 1398 | |
| 1399 | * The slider is considered to be in a state of touch
|
| 1400 | * if any selected channels are in a state of touch.
|
| 1401 |
|
| 1402 | state = flags.states[IQS269_ST_OFFS_TOUCH];
|
| 1403 | state &= iqs269->sys_reg.slider_select[i];
|
| 1404 |
|
| 1405 | input_report_key(iqs269->slider[i], BTN_TOUCH, state);
|
| 1406 |
|
| 1407 | if (state)
|
| 1408 | input_report_abs(iqs269->slider[i],
|
| 1409 | ABS_X, slider_x[i]);
|
| 1410 | break;
|
| 1411 | }
|
| 1412 |
|
| 1413 | input_sync(iqs269->slider[i]);
|
| 1414 | }
|
| 1415 |
|
| 1416 | for (i = 0; i < ARRAY_SIZE(iqs269_events); i++) {
|
| 1417 | dir_mask = flags.states[IQS269_ST_OFFS_DIR];
|
| 1418 | if (!iqs269_events[i].dir_up)
|
| 1419 | dir_mask = ~dir_mask;
|
| 1420 |
|
| 1421 | state = flags.states[iqs269_events[i].st_offs] & dir_mask;
|
| 1422 |
|
| 1423 | sw_code = iqs269->switches[i].code;
|
| 1424 |
|
| 1425 | for (j = 0; j < IQS269_NUM_CH; j++) {
|
| 1426 | keycode = iqs269->keycode[i * IQS269_NUM_CH + j];
|
| 1427 |
|
| 1428 | switch (j) {
|
| 1429 | case IQS269_CHx_HALL_ACTIVE:
|
| 1430 | if (iqs269->hall_enable &&
|
| 1431 | iqs269->switches[i].enabled)
|
| 1432 | input_report_switch(iqs269->keypad,
|
| 1433 | sw_code,
|
| 1434 | state & BIT(j));
|
| 1435 | fallthrough;
|
| 1436 |
|
| 1437 | case IQS269_CHx_HALL_INACTIVE:
|
| 1438 | if (iqs269->hall_enable)
|
| 1439 | continue;
|
| 1440 | fallthrough;
|
| 1441 |
|
| 1442 | default:
|
| 1443 | input_report_key(iqs269->keypad, keycode,
|
| 1444 | state & BIT(j));
|
| 1445 | }
|
| 1446 | }
|
| 1447 | }
|
| 1448 |
|
| 1449 | input_sync(iqs269->keypad);
|
| 1450 |
|
| 1451 | |
| 1452 | * The following completion signals that ATI has finished, any initial
|
| 1453 | * switch states have been reported and the keypad can be registered.
|
| 1454 |
|
| 1455 | complete_all(&iqs269->ati_done);
|
| 1456 |
|
| 1457 | return 0;
|
| 1458 | }
|
| 1459 |
|
| 1460 | static irqreturn_t iqs269_irq(int irq, void *context)
|
| 1461 | {
|
| 1462 | struct iqs269_private *iqs269 = context;
|
| 1463 |
|
| 1464 | if (iqs269_report(iqs269))
|
| 1465 | return IRQ_NONE;
|
| 1466 |
|
| 1467 | |
| 1468 | * The device does not deassert its interrupt (RDY) pin until shortly
|
| 1469 | * after receiving an I2C stop condition; the following delay ensures
|
| 1470 | * the interrupt handler does not return before this time.
|
| 1471 |
|
| 1472 | iqs269_irq_wait();
|
| 1473 |
|
| 1474 | return IRQ_HANDLED;
|
| 1475 | }
|
| 1476 |
|
| 1477 | static ssize_t counts_show(struct device *dev,
|
| 1478 | struct device_attribute *attr, char *buf)
|
| 1479 | {
|
| 1480 | struct iqs269_private *iqs269 = dev_get_drvdata(dev);
|
| 1481 | struct i2c_client *client = iqs269->client;
|
| 1482 | __le16 counts;
|
| 1483 | int error;
|
| 1484 |
|
| 1485 | if (!iqs269->ati_current || iqs269->hall_enable)
|
| 1486 | return -EPERM;
|
| 1487 |
|
| 1488 | if (!completion_done(&iqs269->ati_done))
|
| 1489 | return -EBUSY;
|
| 1490 |
|
| 1491 | |
| 1492 | * Unsolicited I2C communication prompts the device to assert its RDY
|
| 1493 | * pin, so disable the interrupt line until the operation is finished
|
| 1494 | * and RDY has been deasserted.
|
| 1495 |
|
| 1496 | disable_irq(client->irq);
|
| 1497 |
|
| 1498 | error = regmap_raw_read(iqs269->regmap,
|
| 1499 | IQS269_CHx_COUNTS + iqs269->ch_num * 2,
|
| 1500 | &counts, sizeof(counts));
|
| 1501 |
|
| 1502 | iqs269_irq_wait();
|
| 1503 | enable_irq(client->irq);
|
| 1504 |
|
| 1505 | if (error)
|
| 1506 | return error;
|
| 1507 |
|
| 1508 | return sysfs_emit(buf, "%u\n", le16_to_cpu(counts));
|
| 1509 | }
|
| 1510 |
|
| 1511 | static ssize_t hall_bin_show(struct device *dev,
|
| 1512 | struct device_attribute *attr, char *buf)
|
| 1513 | {
|
| 1514 | struct iqs269_private *iqs269 = dev_get_drvdata(dev);
|
| 1515 | struct iqs269_ch_reg *ch_reg = iqs269->sys_reg.ch_reg;
|
| 1516 | struct i2c_client *client = iqs269->client;
|
| 1517 | unsigned int val;
|
| 1518 | int error;
|
| 1519 |
|
| 1520 | disable_irq(client->irq);
|
| 1521 |
|
| 1522 | error = regmap_read(iqs269->regmap, IQS269_CAL_DATA_A, &val);
|
| 1523 |
|
| 1524 | iqs269_irq_wait();
|
| 1525 | enable_irq(client->irq);
|
| 1526 |
|
| 1527 | if (error)
|
| 1528 | return error;
|
| 1529 |
|
| 1530 | switch (ch_reg[IQS269_CHx_HALL_ACTIVE].rx_enable &
|
| 1531 | ch_reg[IQS269_CHx_HALL_INACTIVE].rx_enable) {
|
| 1532 | case IQS269_HALL_PAD_R:
|
| 1533 | val &= IQS269_CAL_DATA_A_HALL_BIN_R_MASK;
|
| 1534 | val >>= IQS269_CAL_DATA_A_HALL_BIN_R_SHIFT;
|
| 1535 | break;
|
| 1536 |
|
| 1537 | case IQS269_HALL_PAD_L:
|
| 1538 | val &= IQS269_CAL_DATA_A_HALL_BIN_L_MASK;
|
| 1539 | val >>= IQS269_CAL_DATA_A_HALL_BIN_L_SHIFT;
|
| 1540 | break;
|
| 1541 |
|
| 1542 | default:
|
| 1543 | return -EINVAL;
|
| 1544 | }
|
| 1545 |
|
| 1546 | return sysfs_emit(buf, "%u\n", val);
|
| 1547 | }
|
| 1548 |
|
| 1549 | static ssize_t hall_enable_show(struct device *dev,
|
| 1550 | struct device_attribute *attr, char *buf)
|
| 1551 | {
|
| 1552 | struct iqs269_private *iqs269 = dev_get_drvdata(dev);
|
| 1553 |
|
| 1554 | return sysfs_emit(buf, "%u\n", iqs269->hall_enable);
|
| 1555 | }
|
| 1556 |
|
| 1557 | static ssize_t hall_enable_store(struct device *dev,
|
| 1558 | struct device_attribute *attr, const char *buf,
|
| 1559 | size_t count)
|
| 1560 | {
|
| 1561 | struct iqs269_private *iqs269 = dev_get_drvdata(dev);
|
| 1562 | unsigned int val;
|
| 1563 | int error;
|
| 1564 |
|
| 1565 | error = kstrtouint(buf, 10, &val);
|
| 1566 | if (error)
|
| 1567 | return error;
|
| 1568 |
|
| 1569 | guard(mutex)(&iqs269->lock);
|
| 1570 |
|
| 1571 | iqs269->hall_enable = val;
|
| 1572 | iqs269->ati_current = false;
|
| 1573 |
|
| 1574 | return count;
|
| 1575 | }
|
| 1576 |
|
| 1577 | static ssize_t ch_number_show(struct device *dev,
|
| 1578 | struct device_attribute *attr, char *buf)
|
| 1579 | {
|
| 1580 | struct iqs269_private *iqs269 = dev_get_drvdata(dev);
|
| 1581 |
|
| 1582 | return sysfs_emit(buf, "%u\n", iqs269->ch_num);
|
| 1583 | }
|
| 1584 |
|
| 1585 | static ssize_t ch_number_store(struct device *dev,
|
| 1586 | struct device_attribute *attr, const char *buf,
|
| 1587 | size_t count)
|
| 1588 | {
|
| 1589 | struct iqs269_private *iqs269 = dev_get_drvdata(dev);
|
| 1590 | unsigned int val;
|
| 1591 | int error;
|
| 1592 |
|
| 1593 | error = kstrtouint(buf, 10, &val);
|
| 1594 | if (error)
|
| 1595 | return error;
|
| 1596 |
|
| 1597 | if (val >= IQS269_NUM_CH)
|
| 1598 | return -EINVAL;
|
| 1599 |
|
| 1600 | iqs269->ch_num = val;
|
| 1601 |
|
| 1602 | return count;
|
| 1603 | }
|
| 1604 |
|
| 1605 | static ssize_t rx_enable_show(struct device *dev,
|
| 1606 | struct device_attribute *attr, char *buf)
|
| 1607 | {
|
| 1608 | struct iqs269_private *iqs269 = dev_get_drvdata(dev);
|
| 1609 | struct iqs269_ch_reg *ch_reg = iqs269->sys_reg.ch_reg;
|
| 1610 |
|
| 1611 | return sysfs_emit(buf, "%u\n", ch_reg[iqs269->ch_num].rx_enable);
|
| 1612 | }
|
| 1613 |
|
| 1614 | static ssize_t rx_enable_store(struct device *dev,
|
| 1615 | struct device_attribute *attr, const char *buf,
|
| 1616 | size_t count)
|
| 1617 | {
|
| 1618 | struct iqs269_private *iqs269 = dev_get_drvdata(dev);
|
| 1619 | struct iqs269_ch_reg *ch_reg = iqs269->sys_reg.ch_reg;
|
| 1620 | unsigned int val;
|
| 1621 | int error;
|
| 1622 |
|
| 1623 | error = kstrtouint(buf, 10, &val);
|
| 1624 | if (error)
|
| 1625 | return error;
|
| 1626 |
|
| 1627 | if (val > 0xFF)
|
| 1628 | return -EINVAL;
|
| 1629 |
|
| 1630 | guard(mutex)(&iqs269->lock);
|
| 1631 |
|
| 1632 | ch_reg[iqs269->ch_num].rx_enable = val;
|
| 1633 | iqs269->ati_current = false;
|
| 1634 |
|
| 1635 | return count;
|
| 1636 | }
|
| 1637 |
|
| 1638 | static ssize_t ati_mode_show(struct device *dev,
|
| 1639 | struct device_attribute *attr, char *buf)
|
| 1640 | {
|
| 1641 | struct iqs269_private *iqs269 = dev_get_drvdata(dev);
|
| 1642 | unsigned int val;
|
| 1643 | int error;
|
| 1644 |
|
| 1645 | error = iqs269_ati_mode_get(iqs269, iqs269->ch_num, &val);
|
| 1646 | if (error)
|
| 1647 | return error;
|
| 1648 |
|
| 1649 | return sysfs_emit(buf, "%u\n", val);
|
| 1650 | }
|
| 1651 |
|
| 1652 | static ssize_t ati_mode_store(struct device *dev,
|
| 1653 | struct device_attribute *attr, const char *buf,
|
| 1654 | size_t count)
|
| 1655 | {
|
| 1656 | struct iqs269_private *iqs269 = dev_get_drvdata(dev);
|
| 1657 | unsigned int val;
|
| 1658 | int error;
|
| 1659 |
|
| 1660 | error = kstrtouint(buf, 10, &val);
|
| 1661 | if (error)
|
| 1662 | return error;
|
| 1663 |
|
| 1664 | error = iqs269_ati_mode_set(iqs269, iqs269->ch_num, val);
|
| 1665 | if (error)
|
| 1666 | return error;
|
| 1667 |
|
| 1668 | return count;
|
| 1669 | }
|
| 1670 |
|
| 1671 | static ssize_t ati_base_show(struct device *dev,
|
| 1672 | struct device_attribute *attr, char *buf)
|
| 1673 | {
|
| 1674 | struct iqs269_private *iqs269 = dev_get_drvdata(dev);
|
| 1675 | unsigned int val;
|
| 1676 | int error;
|
| 1677 |
|
| 1678 | error = iqs269_ati_base_get(iqs269, iqs269->ch_num, &val);
|
| 1679 | if (error)
|
| 1680 | return error;
|
| 1681 |
|
| 1682 | return sysfs_emit(buf, "%u\n", val);
|
| 1683 | }
|
| 1684 |
|
| 1685 | static ssize_t ati_base_store(struct device *dev,
|
| 1686 | struct device_attribute *attr, const char *buf,
|
| 1687 | size_t count)
|
| 1688 | {
|
| 1689 | struct iqs269_private *iqs269 = dev_get_drvdata(dev);
|
| 1690 | unsigned int val;
|
| 1691 | int error;
|
| 1692 |
|
| 1693 | error = kstrtouint(buf, 10, &val);
|
| 1694 | if (error)
|
| 1695 | return error;
|
| 1696 |
|
| 1697 | error = iqs269_ati_base_set(iqs269, iqs269->ch_num, val);
|
| 1698 | if (error)
|
| 1699 | return error;
|
| 1700 |
|
| 1701 | return count;
|
| 1702 | }
|
| 1703 |
|
| 1704 | static ssize_t ati_target_show(struct device *dev,
|
| 1705 | struct device_attribute *attr, char *buf)
|
| 1706 | {
|
| 1707 | struct iqs269_private *iqs269 = dev_get_drvdata(dev);
|
| 1708 | unsigned int val;
|
| 1709 | int error;
|
| 1710 |
|
| 1711 | error = iqs269_ati_target_get(iqs269, iqs269->ch_num, &val);
|
| 1712 | if (error)
|
| 1713 | return error;
|
| 1714 |
|
| 1715 | return sysfs_emit(buf, "%u\n", val);
|
| 1716 | }
|
| 1717 |
|
| 1718 | static ssize_t ati_target_store(struct device *dev,
|
| 1719 | struct device_attribute *attr, const char *buf,
|
| 1720 | size_t count)
|
| 1721 | {
|
| 1722 | struct iqs269_private *iqs269 = dev_get_drvdata(dev);
|
| 1723 | unsigned int val;
|
| 1724 | int error;
|
| 1725 |
|
| 1726 | error = kstrtouint(buf, 10, &val);
|
| 1727 | if (error)
|
| 1728 | return error;
|
| 1729 |
|
| 1730 | error = iqs269_ati_target_set(iqs269, iqs269->ch_num, val);
|
| 1731 | if (error)
|
| 1732 | return error;
|
| 1733 |
|
| 1734 | return count;
|
| 1735 | }
|
| 1736 |
|
| 1737 | static ssize_t ati_trigger_show(struct device *dev,
|
| 1738 | struct device_attribute *attr, char *buf)
|
| 1739 | {
|
| 1740 | struct iqs269_private *iqs269 = dev_get_drvdata(dev);
|
| 1741 |
|
| 1742 | return sysfs_emit(buf, "%u\n",
|
| 1743 | iqs269->ati_current &&
|
| 1744 | completion_done(&iqs269->ati_done));
|
| 1745 | }
|
| 1746 |
|
| 1747 | static ssize_t ati_trigger_store(struct device *dev,
|
| 1748 | struct device_attribute *attr, const char *buf,
|
| 1749 | size_t count)
|
| 1750 | {
|
| 1751 | struct iqs269_private *iqs269 = dev_get_drvdata(dev);
|
| 1752 | struct i2c_client *client = iqs269->client;
|
| 1753 | unsigned int val;
|
| 1754 | int error;
|
| 1755 |
|
| 1756 | error = kstrtouint(buf, 10, &val);
|
| 1757 | if (error)
|
| 1758 | return error;
|
| 1759 |
|
| 1760 | if (!val)
|
| 1761 | return count;
|
| 1762 |
|
| 1763 | disable_irq(client->irq);
|
| 1764 | reinit_completion(&iqs269->ati_done);
|
| 1765 |
|
| 1766 | error = iqs269_dev_init(iqs269);
|
| 1767 |
|
| 1768 | iqs269_irq_wait();
|
| 1769 | enable_irq(client->irq);
|
| 1770 |
|
| 1771 | if (error)
|
| 1772 | return error;
|
| 1773 |
|
| 1774 | if (!wait_for_completion_timeout(&iqs269->ati_done,
|
| 1775 | msecs_to_jiffies(2000)))
|
| 1776 | return -ETIMEDOUT;
|
| 1777 |
|
| 1778 | return count;
|
| 1779 | }
|
| 1780 |
|
| 1781 | static DEVICE_ATTR_RO(counts);
|
| 1782 | static DEVICE_ATTR_RO(hall_bin);
|
| 1783 | static DEVICE_ATTR_RW(hall_enable);
|
| 1784 | static DEVICE_ATTR_RW(ch_number);
|
| 1785 | static DEVICE_ATTR_RW(rx_enable);
|
| 1786 | static DEVICE_ATTR_RW(ati_mode);
|
| 1787 | static DEVICE_ATTR_RW(ati_base);
|
| 1788 | static DEVICE_ATTR_RW(ati_target);
|
| 1789 | static DEVICE_ATTR_RW(ati_trigger);
|
| 1790 |
|
| 1791 | static struct attribute *iqs269_attrs[] = {
|
| 1792 | &dev_attr_counts.attr,
|
| 1793 | &dev_attr_hall_bin.attr,
|
| 1794 | &dev_attr_hall_enable.attr,
|
| 1795 | &dev_attr_ch_number.attr,
|
| 1796 | &dev_attr_rx_enable.attr,
|
| 1797 | &dev_attr_ati_mode.attr,
|
| 1798 | &dev_attr_ati_base.attr,
|
| 1799 | &dev_attr_ati_target.attr,
|
| 1800 | &dev_attr_ati_trigger.attr,
|
| 1801 | NULL,
|
| 1802 | };
|
| 1803 | ATTRIBUTE_GROUPS(iqs269);
|
| 1804 |
|
| 1805 | static const struct regmap_config iqs269_regmap_config = {
|
| 1806 | .reg_bits = 8,
|
| 1807 | .val_bits = 16,
|
| 1808 | .max_register = IQS269_MAX_REG,
|
| 1809 | };
|
| 1810 |
|
| 1811 | static int iqs269_probe(struct i2c_client *client)
|
| 1812 | {
|
| 1813 | struct iqs269_private *iqs269;
|
| 1814 | int error;
|
| 1815 |
|
| 1816 | iqs269 = devm_kzalloc(&client->dev, sizeof(*iqs269), GFP_KERNEL);
|
| 1817 | if (!iqs269)
|
| 1818 | return -ENOMEM;
|
| 1819 |
|
| 1820 | i2c_set_clientdata(client, iqs269);
|
| 1821 | iqs269->client = client;
|
| 1822 |
|
| 1823 | iqs269->regmap = devm_regmap_init_i2c(client, &iqs269_regmap_config);
|
| 1824 | if (IS_ERR(iqs269->regmap)) {
|
| 1825 | error = PTR_ERR(iqs269->regmap);
|
| 1826 | dev_err(&client->dev, "Failed to initialize register map: %d\n",
|
| 1827 | error);
|
| 1828 | return error;
|
| 1829 | }
|
| 1830 |
|
| 1831 | mutex_init(&iqs269->lock);
|
| 1832 | init_completion(&iqs269->ati_done);
|
| 1833 |
|
| 1834 | iqs269->otp_option = (uintptr_t)device_get_match_data(&client->dev);
|
| 1835 |
|
| 1836 | error = regmap_raw_read(iqs269->regmap, IQS269_VER_INFO,
|
| 1837 | &iqs269->ver_info, sizeof(iqs269->ver_info));
|
| 1838 | if (error)
|
| 1839 | return error;
|
| 1840 |
|
| 1841 | if (iqs269->ver_info.prod_num != IQS269_VER_INFO_PROD_NUM) {
|
| 1842 | dev_err(&client->dev, "Unrecognized product number: 0x%02X\n",
|
| 1843 | iqs269->ver_info.prod_num);
|
| 1844 | return -EINVAL;
|
| 1845 | }
|
| 1846 |
|
| 1847 | error = iqs269_parse_prop(iqs269);
|
| 1848 | if (error)
|
| 1849 | return error;
|
| 1850 |
|
| 1851 | error = iqs269_dev_init(iqs269);
|
| 1852 | if (error) {
|
| 1853 | dev_err(&client->dev, "Failed to initialize device: %d\n",
|
| 1854 | error);
|
| 1855 | return error;
|
| 1856 | }
|
| 1857 |
|
| 1858 | error = iqs269_input_init(iqs269);
|
| 1859 | if (error)
|
| 1860 | return error;
|
| 1861 |
|
| 1862 | error = devm_request_threaded_irq(&client->dev, client->irq,
|
| 1863 | NULL, iqs269_irq, IRQF_ONESHOT,
|
| 1864 | client->name, iqs269);
|
| 1865 | if (error) {
|
| 1866 | dev_err(&client->dev, "Failed to request IRQ: %d\n", error);
|
| 1867 | return error;
|
| 1868 | }
|
| 1869 |
|
| 1870 | if (!wait_for_completion_timeout(&iqs269->ati_done,
|
| 1871 | msecs_to_jiffies(2000))) {
|
| 1872 | dev_err(&client->dev, "Failed to complete ATI\n");
|
| 1873 | return -ETIMEDOUT;
|
| 1874 | }
|
| 1875 |
|
| 1876 | |
| 1877 | * The keypad may include one or more switches and is not registered
|
| 1878 | * until ATI is complete and the initial switch states are read.
|
| 1879 |
|
| 1880 | error = input_register_device(iqs269->keypad);
|
| 1881 | if (error) {
|
| 1882 | dev_err(&client->dev, "Failed to register keypad: %d\n", error);
|
| 1883 | return error;
|
| 1884 | }
|
| 1885 |
|
| 1886 | return error;
|
| 1887 | }
|
| 1888 |
|
| 1889 | static u16 iqs269_general_get(struct iqs269_private *iqs269)
|
| 1890 | {
|
| 1891 | u16 general = be16_to_cpu(iqs269->sys_reg.general);
|
| 1892 |
|
| 1893 | general &= ~IQS269_SYS_SETTINGS_REDO_ATI;
|
| 1894 | general &= ~IQS269_SYS_SETTINGS_ACK_RESET;
|
| 1895 |
|
| 1896 | return general | IQS269_SYS_SETTINGS_DIS_AUTO;
|
| 1897 | }
|
| 1898 |
|
| 1899 | static int iqs269_suspend(struct device *dev)
|
| 1900 | {
|
| 1901 | struct iqs269_private *iqs269 = dev_get_drvdata(dev);
|
| 1902 | struct i2c_client *client = iqs269->client;
|
| 1903 | int error;
|
| 1904 | u16 general = iqs269_general_get(iqs269);
|
| 1905 |
|
| 1906 | if (!(general & IQS269_SYS_SETTINGS_PWR_MODE_MASK))
|
| 1907 | return 0;
|
| 1908 |
|
| 1909 | disable_irq(client->irq);
|
| 1910 |
|
| 1911 | error = regmap_write(iqs269->regmap, IQS269_SYS_SETTINGS, general);
|
| 1912 |
|
| 1913 | iqs269_irq_wait();
|
| 1914 | enable_irq(client->irq);
|
| 1915 |
|
| 1916 | return error;
|
| 1917 | }
|
| 1918 |
|
| 1919 | static int iqs269_resume(struct device *dev)
|
| 1920 | {
|
| 1921 | struct iqs269_private *iqs269 = dev_get_drvdata(dev);
|
| 1922 | struct i2c_client *client = iqs269->client;
|
| 1923 | int error;
|
| 1924 | u16 general = iqs269_general_get(iqs269);
|
| 1925 |
|
| 1926 | if (!(general & IQS269_SYS_SETTINGS_PWR_MODE_MASK))
|
| 1927 | return 0;
|
| 1928 |
|
| 1929 | disable_irq(client->irq);
|
| 1930 |
|
| 1931 | error = regmap_write(iqs269->regmap, IQS269_SYS_SETTINGS,
|
| 1932 | general & ~IQS269_SYS_SETTINGS_PWR_MODE_MASK);
|
| 1933 | if (!error)
|
| 1934 | error = regmap_write(iqs269->regmap, IQS269_SYS_SETTINGS,
|
| 1935 | general & ~IQS269_SYS_SETTINGS_DIS_AUTO);
|
| 1936 |
|
| 1937 | iqs269_irq_wait();
|
| 1938 | enable_irq(client->irq);
|
| 1939 |
|
| 1940 | return error;
|
| 1941 | }
|
| 1942 |
|
| 1943 | static DEFINE_SIMPLE_DEV_PM_OPS(iqs269_pm, iqs269_suspend, iqs269_resume);
|
| 1944 |
|
| 1945 | static const struct of_device_id iqs269_of_match[] = {
|
| 1946 | {
|
| 1947 | .compatible = "azoteq,iqs269a",
|
| 1948 | .data = (void *)IQS269_OTP_OPTION_DEFAULT,
|
| 1949 | },
|
| 1950 | {
|
| 1951 | .compatible = "azoteq,iqs269a-00",
|
| 1952 | .data = (void *)IQS269_OTP_OPTION_DEFAULT,
|
| 1953 | },
|
| 1954 | {
|
| 1955 | .compatible = "azoteq,iqs269a-d0",
|
| 1956 | .data = (void *)IQS269_OTP_OPTION_TWS,
|
| 1957 | },
|
| 1958 | { }
|
| 1959 | };
|
| 1960 | MODULE_DEVICE_TABLE(of, iqs269_of_match);
|
| 1961 |
|
| 1962 | static struct i2c_driver iqs269_i2c_driver = {
|
| 1963 | .driver = {
|
| 1964 | .name = "iqs269a",
|
| 1965 | .dev_groups = iqs269_groups,
|
| 1966 | .of_match_table = iqs269_of_match,
|
| 1967 | .pm = pm_sleep_ptr(&iqs269_pm),
|
| 1968 | },
|
| 1969 | .probe = iqs269_probe,
|
| 1970 | };
|
| 1971 | module_i2c_driver(iqs269_i2c_driver);
|
| 1972 |
|
| 1973 | MODULE_AUTHOR("Jeff LaBundy <[email protected]>");
|
| 1974 | MODULE_DESCRIPTION("Azoteq IQS269A Capacitive Touch Controller");
|
| 1975 | MODULE_LICENSE("GPL");
|