projects/linux·blob master · refs

3236 lines · 86.9 KiB

1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * ALPS touchpad PS/2 mouse driver
4 *
5 * Copyright (c) 2003 Neil Brown <[email protected]>
6 * Copyright (c) 2003-2005 Peter Osterlund <[email protected]>
7 * Copyright (c) 2004 Dmitry Torokhov <[email protected]>
8 * Copyright (c) 2005 Vojtech Pavlik <[email protected]>
9 * Copyright (c) 2009 Sebastian Kapfer <[email protected]>
10 *
11 * ALPS detection, tap switching and status querying info is taken from
12 * tpconfig utility (by C. Scott Ananian and Bruce Kall).
13 */
14
15#include "linux/workqueue.h"
16#include <linux/slab.h>
17#include <linux/input.h>
18#include <linux/input/mt.h>
19#include <linux/serio.h>
20#include <linux/libps2.h>
21#include <linux/dmi.h>
22
23#include "psmouse.h"
24#include "alps.h"
25#include "trackpoint.h"
26
27/*
28 * Definitions for ALPS version 3 and 4 command mode protocol
29 */
30#define ALPS_CMD_NIBBLE_10 0x01f2
31
32#define ALPS_REG_BASE_RUSHMORE 0xc2c0
33#define ALPS_REG_BASE_V7 0xc2c0
34#define ALPS_REG_BASE_PINNACLE 0x0000
35
36static const struct alps_nibble_commands alps_v3_nibble_commands[] = {
37 { PSMOUSE_CMD_SETPOLL, 0x00 }, /* 0 */
38 { PSMOUSE_CMD_RESET_DIS, 0x00 }, /* 1 */
39 { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* 2 */
40 { PSMOUSE_CMD_SETRATE, 0x0a }, /* 3 */
41 { PSMOUSE_CMD_SETRATE, 0x14 }, /* 4 */
42 { PSMOUSE_CMD_SETRATE, 0x28 }, /* 5 */
43 { PSMOUSE_CMD_SETRATE, 0x3c }, /* 6 */
44 { PSMOUSE_CMD_SETRATE, 0x50 }, /* 7 */
45 { PSMOUSE_CMD_SETRATE, 0x64 }, /* 8 */
46 { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 9 */
47 { ALPS_CMD_NIBBLE_10, 0x00 }, /* a */
48 { PSMOUSE_CMD_SETRES, 0x00 }, /* b */
49 { PSMOUSE_CMD_SETRES, 0x01 }, /* c */
50 { PSMOUSE_CMD_SETRES, 0x02 }, /* d */
51 { PSMOUSE_CMD_SETRES, 0x03 }, /* e */
52 { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */
53};
54
55static const struct alps_nibble_commands alps_v4_nibble_commands[] = {
56 { PSMOUSE_CMD_ENABLE, 0x00 }, /* 0 */
57 { PSMOUSE_CMD_RESET_DIS, 0x00 }, /* 1 */
58 { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* 2 */
59 { PSMOUSE_CMD_SETRATE, 0x0a }, /* 3 */
60 { PSMOUSE_CMD_SETRATE, 0x14 }, /* 4 */
61 { PSMOUSE_CMD_SETRATE, 0x28 }, /* 5 */
62 { PSMOUSE_CMD_SETRATE, 0x3c }, /* 6 */
63 { PSMOUSE_CMD_SETRATE, 0x50 }, /* 7 */
64 { PSMOUSE_CMD_SETRATE, 0x64 }, /* 8 */
65 { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 9 */
66 { ALPS_CMD_NIBBLE_10, 0x00 }, /* a */
67 { PSMOUSE_CMD_SETRES, 0x00 }, /* b */
68 { PSMOUSE_CMD_SETRES, 0x01 }, /* c */
69 { PSMOUSE_CMD_SETRES, 0x02 }, /* d */
70 { PSMOUSE_CMD_SETRES, 0x03 }, /* e */
71 { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */
72};
73
74static const struct alps_nibble_commands alps_v6_nibble_commands[] = {
75 { PSMOUSE_CMD_ENABLE, 0x00 }, /* 0 */
76 { PSMOUSE_CMD_SETRATE, 0x0a }, /* 1 */
77 { PSMOUSE_CMD_SETRATE, 0x14 }, /* 2 */
78 { PSMOUSE_CMD_SETRATE, 0x28 }, /* 3 */
79 { PSMOUSE_CMD_SETRATE, 0x3c }, /* 4 */
80 { PSMOUSE_CMD_SETRATE, 0x50 }, /* 5 */
81 { PSMOUSE_CMD_SETRATE, 0x64 }, /* 6 */
82 { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 7 */
83 { PSMOUSE_CMD_GETID, 0x00 }, /* 8 */
84 { PSMOUSE_CMD_GETINFO, 0x00 }, /* 9 */
85 { PSMOUSE_CMD_SETRES, 0x00 }, /* a */
86 { PSMOUSE_CMD_SETRES, 0x01 }, /* b */
87 { PSMOUSE_CMD_SETRES, 0x02 }, /* c */
88 { PSMOUSE_CMD_SETRES, 0x03 }, /* d */
89 { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* e */
90 { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */
91};
92
93
94#define ALPS_DUALPOINT 0x02 /* touchpad has trackstick */
95#define ALPS_PASS 0x04 /* device has a pass-through port */
96
97#define ALPS_WHEEL 0x08 /* hardware wheel present */
98#define ALPS_FW_BK_1 0x10 /* front & back buttons present */
99#define ALPS_FW_BK_2 0x20 /* front & back buttons present */
100#define ALPS_FOUR_BUTTONS 0x40 /* 4 direction button present */
101#define ALPS_PS2_INTERLEAVED 0x80 /* 3-byte PS/2 packet interleaved with
102 6-byte ALPS packet */
103#define ALPS_STICK_BITS 0x100 /* separate stick button bits */
104#define ALPS_BUTTONPAD 0x200 /* device is a clickpad */
105#define ALPS_DUALPOINT_WITH_PRESSURE 0x400 /* device can report trackpoint pressure */
106
107static const struct alps_model_info alps_model_data[] = {
108 /*
109 * XXX This entry is suspicious. First byte has zero lower nibble,
110 * which is what a normal mouse would report. Also, the value 0x0e
111 * isn't valid per PS/2 spec.
112 */
113 { { 0x20, 0x02, 0x0e }, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } },
114
115 { { 0x22, 0x02, 0x0a }, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } },
116 { { 0x22, 0x02, 0x14 }, { ALPS_PROTO_V2, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT } }, /* Dell Latitude D600 */
117 { { 0x32, 0x02, 0x14 }, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } }, /* Toshiba Salellite Pro M10 */
118 { { 0x33, 0x02, 0x0a }, { ALPS_PROTO_V1, 0x88, 0xf8, 0 } }, /* UMAX-530T */
119 { { 0x52, 0x01, 0x14 }, { ALPS_PROTO_V2, 0xff, 0xff,
120 ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED } }, /* Toshiba Tecra A11-11L */
121 { { 0x53, 0x02, 0x0a }, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } },
122 { { 0x53, 0x02, 0x14 }, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } },
123 { { 0x60, 0x03, 0xc8 }, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, /* HP ze1115 */
124 { { 0x62, 0x02, 0x14 }, { ALPS_PROTO_V2, 0xcf, 0xcf,
125 ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED } }, /* Dell Latitude E5500, E6400, E6500, Precision M4400 */
126 { { 0x63, 0x02, 0x0a }, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } },
127 { { 0x63, 0x02, 0x14 }, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } },
128 { { 0x63, 0x02, 0x28 }, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 } }, /* Fujitsu Siemens S6010 */
129 { { 0x63, 0x02, 0x3c }, { ALPS_PROTO_V2, 0x8f, 0x8f, ALPS_WHEEL } }, /* Toshiba Satellite S2400-103 */
130 { { 0x63, 0x02, 0x50 }, { ALPS_PROTO_V2, 0xef, 0xef, ALPS_FW_BK_1 } }, /* NEC Versa L320 */
131 { { 0x63, 0x02, 0x64 }, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } },
132 { { 0x63, 0x03, 0xc8 }, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } }, /* Dell Latitude D800 */
133 { { 0x73, 0x00, 0x0a }, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_DUALPOINT } }, /* ThinkPad R61 8918-5QG */
134 { { 0x73, 0x00, 0x14 }, { ALPS_PROTO_V6, 0xff, 0xff, ALPS_DUALPOINT } }, /* Dell XT2 */
135 { { 0x73, 0x02, 0x0a }, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } },
136 { { 0x73, 0x02, 0x14 }, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 } }, /* Ahtec Laptop */
137 { { 0x73, 0x02, 0x50 }, { ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS } }, /* Dell Vostro 1400 */
138};
139
140static const struct alps_protocol_info alps_v3_protocol_data = {
141 ALPS_PROTO_V3, 0x8f, 0x8f, ALPS_DUALPOINT | ALPS_DUALPOINT_WITH_PRESSURE
142};
143
144static const struct alps_protocol_info alps_v3_rushmore_data = {
145 ALPS_PROTO_V3_RUSHMORE, 0x8f, 0x8f, ALPS_DUALPOINT | ALPS_DUALPOINT_WITH_PRESSURE
146};
147
148static const struct alps_protocol_info alps_v4_protocol_data = {
149 ALPS_PROTO_V4, 0x8f, 0x8f, 0
150};
151
152static const struct alps_protocol_info alps_v5_protocol_data = {
153 ALPS_PROTO_V5, 0xc8, 0xd8, 0
154};
155
156static const struct alps_protocol_info alps_v7_protocol_data = {
157 ALPS_PROTO_V7, 0x48, 0x48, ALPS_DUALPOINT | ALPS_DUALPOINT_WITH_PRESSURE
158};
159
160static const struct alps_protocol_info alps_v8_protocol_data = {
161 ALPS_PROTO_V8, 0x18, 0x18, 0
162};
163
164static const struct alps_protocol_info alps_v9_protocol_data = {
165 ALPS_PROTO_V9, 0xc8, 0xc8, 0
166};
167
168/*
169 * Some v2 models report the stick buttons in separate bits
170 */
171static const struct dmi_system_id alps_dmi_has_separate_stick_buttons[] = {
172#if defined(CONFIG_DMI) && defined(CONFIG_X86)
173 {
174 /* Extrapolated from other entries */
175 .matches = {
176 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
177 DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D420"),
178 },
179 },
180 {
181 /* Reported-by: Hans de Bruin <[email protected]> */
182 .matches = {
183 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
184 DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D430"),
185 },
186 },
187 {
188 /* Reported-by: Hans de Goede <[email protected]> */
189 .matches = {
190 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
191 DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D620"),
192 },
193 },
194 {
195 /* Extrapolated from other entries */
196 .matches = {
197 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
198 DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D630"),
199 },
200 },
201#endif
202 { }
203};
204
205static void alps_set_abs_params_st(struct alps_data *priv,
206 struct input_dev *dev1);
207static void alps_set_abs_params_semi_mt(struct alps_data *priv,
208 struct input_dev *dev1);
209static void alps_set_abs_params_v7(struct alps_data *priv,
210 struct input_dev *dev1);
211static void alps_set_abs_params_ss4_v2(struct alps_data *priv,
212 struct input_dev *dev1);
213
214/* Packet formats are described in Documentation/input/devices/alps.rst */
215
216static bool alps_is_valid_first_byte(struct alps_data *priv,
217 unsigned char data)
218{
219 return (data & priv->mask0) == priv->byte0;
220}
221
222static void alps_report_buttons(struct input_dev *dev1, struct input_dev *dev2,
223 int left, int right, int middle)
224{
225 struct input_dev *dev;
226
227 /*
228 * If shared button has already been reported on the
229 * other device (dev2) then this event should be also
230 * sent through that device.
231 */
232 dev = (dev2 && test_bit(BTN_LEFT, dev2->key)) ? dev2 : dev1;
233 input_report_key(dev, BTN_LEFT, left);
234
235 dev = (dev2 && test_bit(BTN_RIGHT, dev2->key)) ? dev2 : dev1;
236 input_report_key(dev, BTN_RIGHT, right);
237
238 dev = (dev2 && test_bit(BTN_MIDDLE, dev2->key)) ? dev2 : dev1;
239 input_report_key(dev, BTN_MIDDLE, middle);
240
241 /*
242 * Sync the _other_ device now, we'll do the first
243 * device later once we report the rest of the events.
244 */
245 if (dev2)
246 input_sync(dev2);
247}
248
249static void alps_process_packet_v1_v2(struct psmouse *psmouse)
250{
251 struct alps_data *priv = psmouse->private;
252 unsigned char *packet = psmouse->packet;
253 struct input_dev *dev = psmouse->dev;
254 struct input_dev *dev2 = priv->dev2;
255 int x, y, z, ges, fin, left, right, middle;
256 int back = 0, forward = 0;
257
258 if (priv->proto_version == ALPS_PROTO_V1) {
259 left = packet[2] & 0x10;
260 right = packet[2] & 0x08;
261 middle = 0;
262 x = packet[1] | ((packet[0] & 0x07) << 7);
263 y = packet[4] | ((packet[3] & 0x07) << 7);
264 z = packet[5];
265 } else {
266 left = packet[3] & 1;
267 right = packet[3] & 2;
268 middle = packet[3] & 4;
269 x = packet[1] | ((packet[2] & 0x78) << (7 - 3));
270 y = packet[4] | ((packet[3] & 0x70) << (7 - 4));
271 z = packet[5];
272 }
273
274 if (priv->flags & ALPS_FW_BK_1) {
275 back = packet[0] & 0x10;
276 forward = packet[2] & 4;
277 }
278
279 if (priv->flags & ALPS_FW_BK_2) {
280 back = packet[3] & 4;
281 forward = packet[2] & 4;
282 if ((middle = forward && back))
283 forward = back = 0;
284 }
285
286 ges = packet[2] & 1;
287 fin = packet[2] & 2;
288
289 if ((priv->flags & ALPS_DUALPOINT) && z == 127) {
290 input_report_rel(dev2, REL_X, (x > 383 ? (x - 768) : x));
291 input_report_rel(dev2, REL_Y, -(y > 255 ? (y - 512) : y));
292
293 alps_report_buttons(dev2, dev, left, right, middle);
294
295 input_sync(dev2);
296 return;
297 }
298
299 /* Some models have separate stick button bits */
300 if (priv->flags & ALPS_STICK_BITS) {
301 left |= packet[0] & 1;
302 right |= packet[0] & 2;
303 middle |= packet[0] & 4;
304 }
305
306 alps_report_buttons(dev, dev2, left, right, middle);
307
308 /* Convert hardware tap to a reasonable Z value */
309 if (ges && !fin)
310 z = 40;
311
312 /*
313 * A "tap and drag" operation is reported by the hardware as a transition
314 * from (!fin && ges) to (fin && ges). This should be translated to the
315 * sequence Z>0, Z==0, Z>0, so the Z==0 event has to be generated manually.
316 */
317 if (ges && fin && !priv->prev_fin) {
318 input_report_abs(dev, ABS_X, x);
319 input_report_abs(dev, ABS_Y, y);
320 input_report_abs(dev, ABS_PRESSURE, 0);
321 input_report_key(dev, BTN_TOOL_FINGER, 0);
322 input_sync(dev);
323 }
324 priv->prev_fin = fin;
325
326 if (z > 30)
327 input_report_key(dev, BTN_TOUCH, 1);
328 if (z < 25)
329 input_report_key(dev, BTN_TOUCH, 0);
330
331 if (z > 0) {
332 input_report_abs(dev, ABS_X, x);
333 input_report_abs(dev, ABS_Y, y);
334 }
335
336 input_report_abs(dev, ABS_PRESSURE, z);
337 input_report_key(dev, BTN_TOOL_FINGER, z > 0);
338
339 if (priv->flags & ALPS_WHEEL)
340 input_report_rel(dev, REL_WHEEL, ((packet[2] << 1) & 0x08) - ((packet[0] >> 4) & 0x07));
341
342 if (priv->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
343 input_report_key(dev, BTN_FORWARD, forward);
344 input_report_key(dev, BTN_BACK, back);
345 }
346
347 if (priv->flags & ALPS_FOUR_BUTTONS) {
348 input_report_key(dev, BTN_0, packet[2] & 4);
349 input_report_key(dev, BTN_1, packet[0] & 0x10);
350 input_report_key(dev, BTN_2, packet[3] & 4);
351 input_report_key(dev, BTN_3, packet[0] & 0x20);
352 }
353
354 input_sync(dev);
355}
356
357static void alps_get_bitmap_points(unsigned int map,
358 struct alps_bitmap_point *low,
359 struct alps_bitmap_point *high,
360 int *fingers)
361{
362 struct alps_bitmap_point *point;
363 int i, bit, prev_bit = 0;
364
365 point = low;
366 for (i = 0; map != 0; i++, map >>= 1) {
367 bit = map & 1;
368 if (bit) {
369 if (!prev_bit) {
370 point->start_bit = i;
371 point->num_bits = 0;
372 (*fingers)++;
373 }
374 point->num_bits++;
375 } else {
376 if (prev_bit)
377 point = high;
378 }
379 prev_bit = bit;
380 }
381}
382
383/*
384 * Process bitmap data from semi-mt protocols. Returns the number of
385 * fingers detected. A return value of 0 means at least one of the
386 * bitmaps was empty.
387 *
388 * The bitmaps don't have enough data to track fingers, so this function
389 * only generates points representing a bounding box of all contacts.
390 * These points are returned in fields->mt when the return value
391 * is greater than 0.
392 */
393static int alps_process_bitmap(struct alps_data *priv,
394 struct alps_fields *fields)
395{
396 int i, fingers_x = 0, fingers_y = 0, fingers, closest;
397 struct alps_bitmap_point x_low = {0,}, x_high = {0,};
398 struct alps_bitmap_point y_low = {0,}, y_high = {0,};
399 struct input_mt_pos corner[4];
400
401 if (!fields->x_map || !fields->y_map)
402 return 0;
403
404 alps_get_bitmap_points(fields->x_map, &x_low, &x_high, &fingers_x);
405 alps_get_bitmap_points(fields->y_map, &y_low, &y_high, &fingers_y);
406
407 /*
408 * Fingers can overlap, so we use the maximum count of fingers
409 * on either axis as the finger count.
410 */
411 fingers = max(fingers_x, fingers_y);
412
413 /*
414 * If an axis reports only a single contact, we have overlapping or
415 * adjacent fingers. Divide the single contact between the two points.
416 */
417 if (fingers_x == 1) {
418 i = (x_low.num_bits - 1) / 2;
419 x_low.num_bits = x_low.num_bits - i;
420 x_high.start_bit = x_low.start_bit + i;
421 x_high.num_bits = max(i, 1);
422 }
423 if (fingers_y == 1) {
424 i = (y_low.num_bits - 1) / 2;
425 y_low.num_bits = y_low.num_bits - i;
426 y_high.start_bit = y_low.start_bit + i;
427 y_high.num_bits = max(i, 1);
428 }
429
430 /* top-left corner */
431 corner[0].x =
432 (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) /
433 (2 * (priv->x_bits - 1));
434 corner[0].y =
435 (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) /
436 (2 * (priv->y_bits - 1));
437
438 /* top-right corner */
439 corner[1].x =
440 (priv->x_max * (2 * x_high.start_bit + x_high.num_bits - 1)) /
441 (2 * (priv->x_bits - 1));
442 corner[1].y =
443 (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) /
444 (2 * (priv->y_bits - 1));
445
446 /* bottom-right corner */
447 corner[2].x =
448 (priv->x_max * (2 * x_high.start_bit + x_high.num_bits - 1)) /
449 (2 * (priv->x_bits - 1));
450 corner[2].y =
451 (priv->y_max * (2 * y_high.start_bit + y_high.num_bits - 1)) /
452 (2 * (priv->y_bits - 1));
453
454 /* bottom-left corner */
455 corner[3].x =
456 (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) /
457 (2 * (priv->x_bits - 1));
458 corner[3].y =
459 (priv->y_max * (2 * y_high.start_bit + y_high.num_bits - 1)) /
460 (2 * (priv->y_bits - 1));
461
462 /* x-bitmap order is reversed on v5 touchpads */
463 if (priv->proto_version == ALPS_PROTO_V5) {
464 for (i = 0; i < 4; i++)
465 corner[i].x = priv->x_max - corner[i].x;
466 }
467
468 /* y-bitmap order is reversed on v3 and v4 touchpads */
469 if (priv->proto_version == ALPS_PROTO_V3 ||
470 priv->proto_version == ALPS_PROTO_V4) {
471 for (i = 0; i < 4; i++)
472 corner[i].y = priv->y_max - corner[i].y;
473 }
474
475 /*
476 * We only select a corner for the second touch once per 2 finger
477 * touch sequence to avoid the chosen corner (and thus the coordinates)
478 * jumping around when the first touch is in the middle.
479 */
480 if (priv->second_touch == -1) {
481 /* Find corner closest to our st coordinates */
482 closest = 0x7fffffff;
483 for (i = 0; i < 4; i++) {
484 int dx = fields->st.x - corner[i].x;
485 int dy = fields->st.y - corner[i].y;
486 int distance = dx * dx + dy * dy;
487
488 if (distance < closest) {
489 priv->second_touch = i;
490 closest = distance;
491 }
492 }
493 /* And select the opposite corner to use for the 2nd touch */
494 priv->second_touch = (priv->second_touch + 2) % 4;
495 }
496
497 fields->mt[0] = fields->st;
498 fields->mt[1] = corner[priv->second_touch];
499
500 return fingers;
501}
502
503static void alps_set_slot(struct input_dev *dev, int slot, int x, int y)
504{
505 input_mt_slot(dev, slot);
506 input_mt_report_slot_state(dev, MT_TOOL_FINGER, true);
507 input_report_abs(dev, ABS_MT_POSITION_X, x);
508 input_report_abs(dev, ABS_MT_POSITION_Y, y);
509}
510
511static void alps_report_mt_data(struct psmouse *psmouse, int n)
512{
513 struct alps_data *priv = psmouse->private;
514 struct input_dev *dev = psmouse->dev;
515 struct alps_fields *f = &priv->f;
516 int i, slot[MAX_TOUCHES];
517
518 input_mt_assign_slots(dev, slot, f->mt, n, 0);
519 for (i = 0; i < n; i++)
520 alps_set_slot(dev, slot[i], f->mt[i].x, f->mt[i].y);
521
522 input_mt_sync_frame(dev);
523}
524
525static void alps_report_semi_mt_data(struct psmouse *psmouse, int fingers)
526{
527 struct alps_data *priv = psmouse->private;
528 struct input_dev *dev = psmouse->dev;
529 struct alps_fields *f = &priv->f;
530
531 /* Use st data when we don't have mt data */
532 if (fingers < 2) {
533 f->mt[0].x = f->st.x;
534 f->mt[0].y = f->st.y;
535 fingers = f->pressure > 0 ? 1 : 0;
536 priv->second_touch = -1;
537 }
538
539 if (fingers >= 1)
540 alps_set_slot(dev, 0, f->mt[0].x, f->mt[0].y);
541 if (fingers >= 2)
542 alps_set_slot(dev, 1, f->mt[1].x, f->mt[1].y);
543 input_mt_sync_frame(dev);
544
545 input_mt_report_finger_count(dev, fingers);
546
547 input_report_key(dev, BTN_LEFT, f->left);
548 input_report_key(dev, BTN_RIGHT, f->right);
549 input_report_key(dev, BTN_MIDDLE, f->middle);
550
551 input_report_abs(dev, ABS_PRESSURE, f->pressure);
552
553 input_sync(dev);
554}
555
556static void alps_process_trackstick_packet_v3(struct psmouse *psmouse)
557{
558 struct alps_data *priv = psmouse->private;
559 unsigned char *packet = psmouse->packet;
560 struct input_dev *dev = priv->dev2;
561 int x, y, z, left, right, middle;
562
563 /* It should be a DualPoint when received trackstick packet */
564 if (!(priv->flags & ALPS_DUALPOINT)) {
565 psmouse_warn(psmouse,
566 "Rejected trackstick packet from non DualPoint device");
567 return;
568 }
569
570 /* Sanity check packet */
571 if (!(packet[0] & 0x40)) {
572 psmouse_dbg(psmouse, "Bad trackstick packet, discarding\n");
573 return;
574 }
575
576 /*
577 * There's a special packet that seems to indicate the end
578 * of a stream of trackstick data. Filter these out.
579 */
580 if (packet[1] == 0x7f && packet[2] == 0x7f && packet[4] == 0x7f)
581 return;
582
583 x = (s8)(((packet[0] & 0x20) << 2) | (packet[1] & 0x7f));
584 y = (s8)(((packet[0] & 0x10) << 3) | (packet[2] & 0x7f));
585 z = packet[4] & 0x7f;
586
587 /*
588 * The x and y values tend to be quite large, and when used
589 * alone the trackstick is difficult to use. Scale them down
590 * to compensate.
591 */
592 x /= 8;
593 y /= 8;
594
595 input_report_rel(dev, REL_X, x);
596 input_report_rel(dev, REL_Y, -y);
597 input_report_abs(dev, ABS_PRESSURE, z);
598
599 /*
600 * Most ALPS models report the trackstick buttons in the touchpad
601 * packets, but a few report them here. No reliable way has been
602 * found to differentiate between the models upfront, so we enable
603 * the quirk in response to seeing a button press in the trackstick
604 * packet.
605 */
606 left = packet[3] & 0x01;
607 right = packet[3] & 0x02;
608 middle = packet[3] & 0x04;
609
610 if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS) &&
611 (left || right || middle))
612 priv->quirks |= ALPS_QUIRK_TRACKSTICK_BUTTONS;
613
614 if (priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS) {
615 input_report_key(dev, BTN_LEFT, left);
616 input_report_key(dev, BTN_RIGHT, right);
617 input_report_key(dev, BTN_MIDDLE, middle);
618 }
619
620 input_sync(dev);
621 return;
622}
623
624static void alps_decode_buttons_v3(struct alps_fields *f, unsigned char *p)
625{
626 f->left = !!(p[3] & 0x01);
627 f->right = !!(p[3] & 0x02);
628 f->middle = !!(p[3] & 0x04);
629
630 f->ts_left = !!(p[3] & 0x10);
631 f->ts_right = !!(p[3] & 0x20);
632 f->ts_middle = !!(p[3] & 0x40);
633}
634
635static int alps_decode_pinnacle(struct alps_fields *f, unsigned char *p,
636 struct psmouse *psmouse)
637{
638 f->first_mp = !!(p[4] & 0x40);
639 f->is_mp = !!(p[0] & 0x40);
640
641 if (f->is_mp) {
642 f->fingers = (p[5] & 0x3) + 1;
643 f->x_map = ((p[4] & 0x7e) << 8) |
644 ((p[1] & 0x7f) << 2) |
645 ((p[0] & 0x30) >> 4);
646 f->y_map = ((p[3] & 0x70) << 4) |
647 ((p[2] & 0x7f) << 1) |
648 (p[4] & 0x01);
649 } else {
650 f->st.x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) |
651 ((p[0] & 0x30) >> 4);
652 f->st.y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f);
653 f->pressure = p[5] & 0x7f;
654
655 alps_decode_buttons_v3(f, p);
656 }
657
658 return 0;
659}
660
661static int alps_decode_rushmore(struct alps_fields *f, unsigned char *p,
662 struct psmouse *psmouse)
663{
664 f->first_mp = !!(p[4] & 0x40);
665 f->is_mp = !!(p[5] & 0x40);
666
667 if (f->is_mp) {
668 f->fingers = max((p[5] & 0x3), ((p[5] >> 2) & 0x3)) + 1;
669 f->x_map = ((p[5] & 0x10) << 11) |
670 ((p[4] & 0x7e) << 8) |
671 ((p[1] & 0x7f) << 2) |
672 ((p[0] & 0x30) >> 4);
673 f->y_map = ((p[5] & 0x20) << 6) |
674 ((p[3] & 0x70) << 4) |
675 ((p[2] & 0x7f) << 1) |
676 (p[4] & 0x01);
677 } else {
678 f->st.x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) |
679 ((p[0] & 0x30) >> 4);
680 f->st.y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f);
681 f->pressure = p[5] & 0x7f;
682
683 alps_decode_buttons_v3(f, p);
684 }
685
686 return 0;
687}
688
689static int alps_decode_dolphin(struct alps_fields *f, unsigned char *p,
690 struct psmouse *psmouse)
691{
692 u64 palm_data = 0;
693 struct alps_data *priv = psmouse->private;
694
695 f->first_mp = !!(p[0] & 0x02);
696 f->is_mp = !!(p[0] & 0x20);
697
698 if (!f->is_mp) {
699 f->st.x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
700 f->st.y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
701 f->pressure = (p[0] & 4) ? 0 : p[5] & 0x7f;
702 alps_decode_buttons_v3(f, p);
703 } else {
704 f->fingers = ((p[0] & 0x6) >> 1 |
705 (p[0] & 0x10) >> 2);
706
707 palm_data = (p[1] & 0x7f) |
708 ((p[2] & 0x7f) << 7) |
709 ((p[4] & 0x7f) << 14) |
710 ((p[5] & 0x7f) << 21) |
711 ((p[3] & 0x07) << 28) |
712 (((u64)p[3] & 0x70) << 27) |
713 (((u64)p[0] & 0x01) << 34);
714
715 /* Y-profile is stored in P(0) to p(n-1), n = y_bits; */
716 f->y_map = palm_data & (BIT(priv->y_bits) - 1);
717
718 /* X-profile is stored in p(n) to p(n+m-1), m = x_bits; */
719 f->x_map = (palm_data >> priv->y_bits) &
720 (BIT(priv->x_bits) - 1);
721 }
722
723 return 0;
724}
725
726static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
727{
728 struct alps_data *priv = psmouse->private;
729 unsigned char *packet = psmouse->packet;
730 struct input_dev *dev2 = priv->dev2;
731 struct alps_fields *f = &priv->f;
732 int fingers = 0;
733
734 memset(f, 0, sizeof(*f));
735
736 priv->decode_fields(f, packet, psmouse);
737
738 /*
739 * There's no single feature of touchpad position and bitmap packets
740 * that can be used to distinguish between them. We rely on the fact
741 * that a bitmap packet should always follow a position packet with
742 * bit 6 of packet[4] set.
743 */
744 if (priv->multi_packet) {
745 /*
746 * Sometimes a position packet will indicate a multi-packet
747 * sequence, but then what follows is another position
748 * packet. Check for this, and when it happens process the
749 * position packet as usual.
750 */
751 if (f->is_mp) {
752 fingers = f->fingers;
753 /*
754 * Bitmap processing uses position packet's coordinate
755 * data, so we need to do decode it first.
756 */
757 priv->decode_fields(f, priv->multi_data, psmouse);
758 if (alps_process_bitmap(priv, f) == 0)
759 fingers = 0; /* Use st data */
760 } else {
761 priv->multi_packet = 0;
762 }
763 }
764
765 /*
766 * Bit 6 of byte 0 is not usually set in position packets. The only
767 * times it seems to be set is in situations where the data is
768 * suspect anyway, e.g. a palm resting flat on the touchpad. Given
769 * this combined with the fact that this bit is useful for filtering
770 * out misidentified bitmap packets, we reject anything with this
771 * bit set.
772 */
773 if (f->is_mp)
774 return;
775
776 if (!priv->multi_packet && f->first_mp) {
777 priv->multi_packet = 1;
778 memcpy(priv->multi_data, packet, sizeof(priv->multi_data));
779 return;
780 }
781
782 priv->multi_packet = 0;
783
784 /*
785 * Sometimes the hardware sends a single packet with z = 0
786 * in the middle of a stream. Real releases generate packets
787 * with x, y, and z all zero, so these seem to be flukes.
788 * Ignore them.
789 */
790 if (f->st.x && f->st.y && !f->pressure)
791 return;
792
793 alps_report_semi_mt_data(psmouse, fingers);
794
795 if ((priv->flags & ALPS_DUALPOINT) &&
796 !(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) {
797 input_report_key(dev2, BTN_LEFT, f->ts_left);
798 input_report_key(dev2, BTN_RIGHT, f->ts_right);
799 input_report_key(dev2, BTN_MIDDLE, f->ts_middle);
800 input_sync(dev2);
801 }
802}
803
804static void alps_process_packet_v3(struct psmouse *psmouse)
805{
806 unsigned char *packet = psmouse->packet;
807
808 /*
809 * v3 protocol packets come in three types, two representing
810 * touchpad data and one representing trackstick data.
811 * Trackstick packets seem to be distinguished by always
812 * having 0x3f in the last byte. This value has never been
813 * observed in the last byte of either of the other types
814 * of packets.
815 */
816 if (packet[5] == 0x3f) {
817 alps_process_trackstick_packet_v3(psmouse);
818 return;
819 }
820
821 alps_process_touchpad_packet_v3_v5(psmouse);
822}
823
824static void alps_process_packet_v6(struct psmouse *psmouse)
825{
826 struct alps_data *priv = psmouse->private;
827 unsigned char *packet = psmouse->packet;
828 struct input_dev *dev = psmouse->dev;
829 struct input_dev *dev2 = priv->dev2;
830 int x, y, z;
831
832 /*
833 * We can use Byte5 to distinguish if the packet is from Touchpad
834 * or Trackpoint.
835 * Touchpad: 0 - 0x7E
836 * Trackpoint: 0x7F
837 */
838 if (packet[5] == 0x7F) {
839 /* It should be a DualPoint when received Trackpoint packet */
840 if (!(priv->flags & ALPS_DUALPOINT)) {
841 psmouse_warn(psmouse,
842 "Rejected trackstick packet from non DualPoint device");
843 return;
844 }
845
846 /* Trackpoint packet */
847 x = packet[1] | ((packet[3] & 0x20) << 2);
848 y = packet[2] | ((packet[3] & 0x40) << 1);
849 z = packet[4];
850
851 /* To prevent the cursor jump when finger lifted */
852 if (x == 0x7F && y == 0x7F && z == 0x7F)
853 x = y = z = 0;
854
855 /* Divide 4 since trackpoint's speed is too fast */
856 input_report_rel(dev2, REL_X, (s8)x / 4);
857 input_report_rel(dev2, REL_Y, -((s8)y / 4));
858
859 psmouse_report_standard_buttons(dev2, packet[3]);
860
861 input_sync(dev2);
862 return;
863 }
864
865 /* Touchpad packet */
866 x = packet[1] | ((packet[3] & 0x78) << 4);
867 y = packet[2] | ((packet[4] & 0x78) << 4);
868 z = packet[5];
869
870 if (z > 30)
871 input_report_key(dev, BTN_TOUCH, 1);
872 if (z < 25)
873 input_report_key(dev, BTN_TOUCH, 0);
874
875 if (z > 0) {
876 input_report_abs(dev, ABS_X, x);
877 input_report_abs(dev, ABS_Y, y);
878 }
879
880 input_report_abs(dev, ABS_PRESSURE, z);
881 input_report_key(dev, BTN_TOOL_FINGER, z > 0);
882
883 /* v6 touchpad does not have middle button */
884 packet[3] &= ~BIT(2);
885 psmouse_report_standard_buttons(dev2, packet[3]);
886
887 input_sync(dev);
888}
889
890static void alps_process_packet_v4(struct psmouse *psmouse)
891{
892 struct alps_data *priv = psmouse->private;
893 unsigned char *packet = psmouse->packet;
894 struct alps_fields *f = &priv->f;
895 int offset;
896
897 /*
898 * v4 has a 6-byte encoding for bitmap data, but this data is
899 * broken up between 3 normal packets. Use priv->multi_packet to
900 * track our position in the bitmap packet.
901 */
902 if (packet[6] & 0x40) {
903 /* sync, reset position */
904 priv->multi_packet = 0;
905 }
906
907 if (WARN_ON_ONCE(priv->multi_packet > 2))
908 return;
909
910 offset = 2 * priv->multi_packet;
911 priv->multi_data[offset] = packet[6];
912 priv->multi_data[offset + 1] = packet[7];
913
914 f->left = !!(packet[4] & 0x01);
915 f->right = !!(packet[4] & 0x02);
916
917 f->st.x = ((packet[1] & 0x7f) << 4) | ((packet[3] & 0x30) >> 2) |
918 ((packet[0] & 0x30) >> 4);
919 f->st.y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f);
920 f->pressure = packet[5] & 0x7f;
921
922 if (++priv->multi_packet > 2) {
923 priv->multi_packet = 0;
924
925 f->x_map = ((priv->multi_data[2] & 0x1f) << 10) |
926 ((priv->multi_data[3] & 0x60) << 3) |
927 ((priv->multi_data[0] & 0x3f) << 2) |
928 ((priv->multi_data[1] & 0x60) >> 5);
929 f->y_map = ((priv->multi_data[5] & 0x01) << 10) |
930 ((priv->multi_data[3] & 0x1f) << 5) |
931 (priv->multi_data[1] & 0x1f);
932
933 f->fingers = alps_process_bitmap(priv, f);
934 }
935
936 alps_report_semi_mt_data(psmouse, f->fingers);
937}
938
939static bool alps_is_valid_package_v7(struct psmouse *psmouse)
940{
941 switch (psmouse->pktcnt) {
942 case 3:
943 return (psmouse->packet[2] & 0x40) == 0x40;
944 case 4:
945 return (psmouse->packet[3] & 0x48) == 0x48;
946 case 6:
947 return (psmouse->packet[5] & 0x40) == 0x00;
948 }
949 return true;
950}
951
952static unsigned char alps_get_packet_id_v7(char *byte)
953{
954 unsigned char packet_id;
955
956 if (byte[4] & 0x40)
957 packet_id = V7_PACKET_ID_TWO;
958 else if (byte[4] & 0x01)
959 packet_id = V7_PACKET_ID_MULTI;
960 else if ((byte[0] & 0x10) && !(byte[4] & 0x43))
961 packet_id = V7_PACKET_ID_NEW;
962 else if (byte[1] == 0x00 && byte[4] == 0x00)
963 packet_id = V7_PACKET_ID_IDLE;
964 else
965 packet_id = V7_PACKET_ID_UNKNOWN;
966
967 return packet_id;
968}
969
970static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt,
971 unsigned char *pkt,
972 unsigned char pkt_id)
973{
974 mt[0].x = ((pkt[2] & 0x80) << 4);
975 mt[0].x |= ((pkt[2] & 0x3F) << 5);
976 mt[0].x |= ((pkt[3] & 0x30) >> 1);
977 mt[0].x |= (pkt[3] & 0x07);
978 mt[0].y = (pkt[1] << 3) | (pkt[0] & 0x07);
979
980 mt[1].x = ((pkt[3] & 0x80) << 4);
981 mt[1].x |= ((pkt[4] & 0x80) << 3);
982 mt[1].x |= ((pkt[4] & 0x3F) << 4);
983 mt[1].y = ((pkt[5] & 0x80) << 3);
984 mt[1].y |= ((pkt[5] & 0x3F) << 4);
985
986 switch (pkt_id) {
987 case V7_PACKET_ID_TWO:
988 mt[1].x &= ~0x000F;
989 mt[1].y |= 0x000F;
990 /* Detect false-positive touches where x & y report max value */
991 if (mt[1].y == 0x7ff && mt[1].x == 0xff0) {
992 mt[1].x = 0;
993 /* y gets set to 0 at the end of this function */
994 }
995 break;
996
997 case V7_PACKET_ID_MULTI:
998 mt[1].x &= ~0x003F;
999 mt[1].y &= ~0x0020;
1000 mt[1].y |= ((pkt[4] & 0x02) << 4);
1001 mt[1].y |= 0x001F;
1002 break;
1003
1004 case V7_PACKET_ID_NEW:
1005 mt[1].x &= ~0x003F;
1006 mt[1].x |= (pkt[0] & 0x20);
1007 mt[1].y |= 0x000F;
1008 break;
1009 }
1010
1011 mt[0].y = 0x7FF - mt[0].y;
1012 mt[1].y = 0x7FF - mt[1].y;
1013}
1014
1015static int alps_get_mt_count(struct input_mt_pos *mt)
1016{
1017 int i, fingers = 0;
1018
1019 for (i = 0; i < MAX_TOUCHES; i++) {
1020 if (mt[i].x != 0 || mt[i].y != 0)
1021 fingers++;
1022 }
1023
1024 return fingers;
1025}
1026
1027static int alps_decode_packet_v7(struct alps_fields *f,
1028 unsigned char *p,
1029 struct psmouse *psmouse)
1030{
1031 struct alps_data *priv = psmouse->private;
1032 unsigned char pkt_id;
1033
1034 pkt_id = alps_get_packet_id_v7(p);
1035 if (pkt_id == V7_PACKET_ID_IDLE)
1036 return 0;
1037 if (pkt_id == V7_PACKET_ID_UNKNOWN)
1038 return -1;
1039 /*
1040 * NEW packets are send to indicate a discontinuity in the finger
1041 * coordinate reporting. Specifically a finger may have moved from
1042 * slot 0 to 1 or vice versa. INPUT_MT_TRACK takes care of this for
1043 * us.
1044 *
1045 * NEW packets have 3 problems:
1046 * 1) They do not contain middle / right button info (on non clickpads)
1047 * this can be worked around by preserving the old button state
1048 * 2) They do not contain an accurate fingercount, and they are
1049 * typically send when the number of fingers changes. We cannot use
1050 * the old finger count as that may mismatch with the amount of
1051 * touch coordinates we've available in the NEW packet
1052 * 3) Their x data for the second touch is inaccurate leading to
1053 * a possible jump of the x coordinate by 16 units when the first
1054 * non NEW packet comes in
1055 * Since problems 2 & 3 cannot be worked around, just ignore them.
1056 */
1057 if (pkt_id == V7_PACKET_ID_NEW)
1058 return 1;
1059
1060 alps_get_finger_coordinate_v7(f->mt, p, pkt_id);
1061
1062 if (pkt_id == V7_PACKET_ID_TWO)
1063 f->fingers = alps_get_mt_count(f->mt);
1064 else /* pkt_id == V7_PACKET_ID_MULTI */
1065 f->fingers = 3 + (p[5] & 0x03);
1066
1067 f->left = (p[0] & 0x80) >> 7;
1068 if (priv->flags & ALPS_BUTTONPAD) {
1069 if (p[0] & 0x20)
1070 f->fingers++;
1071 if (p[0] & 0x10)
1072 f->fingers++;
1073 } else {
1074 f->right = (p[0] & 0x20) >> 5;
1075 f->middle = (p[0] & 0x10) >> 4;
1076 }
1077
1078 /* Sometimes a single touch is reported in mt[1] rather then mt[0] */
1079 if (f->fingers == 1 && f->mt[0].x == 0 && f->mt[0].y == 0) {
1080 f->mt[0].x = f->mt[1].x;
1081 f->mt[0].y = f->mt[1].y;
1082 f->mt[1].x = 0;
1083 f->mt[1].y = 0;
1084 }
1085
1086 return 0;
1087}
1088
1089static void alps_process_trackstick_packet_v7(struct psmouse *psmouse)
1090{
1091 struct alps_data *priv = psmouse->private;
1092 unsigned char *packet = psmouse->packet;
1093 struct input_dev *dev2 = priv->dev2;
1094 int x, y, z;
1095
1096 /* It should be a DualPoint when received trackstick packet */
1097 if (!(priv->flags & ALPS_DUALPOINT)) {
1098 psmouse_warn(psmouse,
1099 "Rejected trackstick packet from non DualPoint device");
1100 return;
1101 }
1102
1103 x = ((packet[2] & 0xbf)) | ((packet[3] & 0x10) << 2);
1104 y = (packet[3] & 0x07) | (packet[4] & 0xb8) |
1105 ((packet[3] & 0x20) << 1);
1106 z = (packet[5] & 0x3f) | ((packet[3] & 0x80) >> 1);
1107
1108 input_report_rel(dev2, REL_X, (s8)x);
1109 input_report_rel(dev2, REL_Y, -((s8)y));
1110 input_report_abs(dev2, ABS_PRESSURE, z);
1111
1112 psmouse_report_standard_buttons(dev2, packet[1]);
1113
1114 input_sync(dev2);
1115}
1116
1117static void alps_process_touchpad_packet_v7(struct psmouse *psmouse)
1118{
1119 struct alps_data *priv = psmouse->private;
1120 struct input_dev *dev = psmouse->dev;
1121 struct alps_fields *f = &priv->f;
1122
1123 memset(f, 0, sizeof(*f));
1124
1125 if (priv->decode_fields(f, psmouse->packet, psmouse))
1126 return;
1127
1128 alps_report_mt_data(psmouse, alps_get_mt_count(f->mt));
1129
1130 input_mt_report_finger_count(dev, f->fingers);
1131
1132 input_report_key(dev, BTN_LEFT, f->left);
1133 input_report_key(dev, BTN_RIGHT, f->right);
1134 input_report_key(dev, BTN_MIDDLE, f->middle);
1135
1136 input_sync(dev);
1137}
1138
1139static void alps_process_packet_v7(struct psmouse *psmouse)
1140{
1141 unsigned char *packet = psmouse->packet;
1142
1143 if (packet[0] == 0x48 && (packet[4] & 0x47) == 0x06)
1144 alps_process_trackstick_packet_v7(psmouse);
1145 else
1146 alps_process_touchpad_packet_v7(psmouse);
1147}
1148
1149static enum SS4_PACKET_ID alps_get_pkt_id_ss4_v2(unsigned char *byte)
1150{
1151 enum SS4_PACKET_ID pkt_id = SS4_PACKET_ID_IDLE;
1152
1153 switch (byte[3] & 0x30) {
1154 case 0x00:
1155 if (SS4_IS_IDLE_V2(byte)) {
1156 pkt_id = SS4_PACKET_ID_IDLE;
1157 } else {
1158 pkt_id = SS4_PACKET_ID_ONE;
1159 }
1160 break;
1161 case 0x10:
1162 /* two-finger finger positions */
1163 pkt_id = SS4_PACKET_ID_TWO;
1164 break;
1165 case 0x20:
1166 /* stick pointer */
1167 pkt_id = SS4_PACKET_ID_STICK;
1168 break;
1169 case 0x30:
1170 /* third and fourth finger positions */
1171 pkt_id = SS4_PACKET_ID_MULTI;
1172 break;
1173 }
1174
1175 return pkt_id;
1176}
1177
1178static int alps_decode_ss4_v2(struct alps_fields *f,
1179 unsigned char *p, struct psmouse *psmouse)
1180{
1181 struct alps_data *priv = psmouse->private;
1182 enum SS4_PACKET_ID pkt_id;
1183 unsigned int no_data_x, no_data_y;
1184
1185 pkt_id = alps_get_pkt_id_ss4_v2(p);
1186
1187 /* Current packet is 1Finger coordinate packet */
1188 switch (pkt_id) {
1189 case SS4_PACKET_ID_ONE:
1190 f->mt[0].x = SS4_1F_X_V2(p);
1191 f->mt[0].y = SS4_1F_Y_V2(p);
1192 f->pressure = ((SS4_1F_Z_V2(p)) * 2) & 0x7f;
1193 /*
1194 * When a button is held the device will give us events
1195 * with x, y, and pressure of 0. This causes annoying jumps
1196 * if a touch is released while the button is held.
1197 * Handle this by claiming zero contacts.
1198 */
1199 f->fingers = f->pressure > 0 ? 1 : 0;
1200 f->first_mp = 0;
1201 f->is_mp = 0;
1202 break;
1203
1204 case SS4_PACKET_ID_TWO:
1205 if (priv->flags & ALPS_BUTTONPAD) {
1206 if (IS_SS4PLUS_DEV(priv->dev_id)) {
1207 f->mt[0].x = SS4_PLUS_BTL_MF_X_V2(p, 0);
1208 f->mt[1].x = SS4_PLUS_BTL_MF_X_V2(p, 1);
1209 } else {
1210 f->mt[0].x = SS4_BTL_MF_X_V2(p, 0);
1211 f->mt[1].x = SS4_BTL_MF_X_V2(p, 1);
1212 }
1213 f->mt[0].y = SS4_BTL_MF_Y_V2(p, 0);
1214 f->mt[1].y = SS4_BTL_MF_Y_V2(p, 1);
1215 } else {
1216 if (IS_SS4PLUS_DEV(priv->dev_id)) {
1217 f->mt[0].x = SS4_PLUS_STD_MF_X_V2(p, 0);
1218 f->mt[1].x = SS4_PLUS_STD_MF_X_V2(p, 1);
1219 } else {
1220 f->mt[0].x = SS4_STD_MF_X_V2(p, 0);
1221 f->mt[1].x = SS4_STD_MF_X_V2(p, 1);
1222 }
1223 f->mt[0].y = SS4_STD_MF_Y_V2(p, 0);
1224 f->mt[1].y = SS4_STD_MF_Y_V2(p, 1);
1225 }
1226 f->pressure = SS4_MF_Z_V2(p, 0) ? 0x30 : 0;
1227
1228 if (SS4_IS_MF_CONTINUE(p)) {
1229 f->first_mp = 1;
1230 } else {
1231 f->fingers = 2;
1232 f->first_mp = 0;
1233 }
1234 f->is_mp = 0;
1235
1236 break;
1237
1238 case SS4_PACKET_ID_MULTI:
1239 if (priv->flags & ALPS_BUTTONPAD) {
1240 if (IS_SS4PLUS_DEV(priv->dev_id)) {
1241 f->mt[2].x = SS4_PLUS_BTL_MF_X_V2(p, 0);
1242 f->mt[3].x = SS4_PLUS_BTL_MF_X_V2(p, 1);
1243 no_data_x = SS4_PLUS_MFPACKET_NO_AX_BL;
1244 } else {
1245 f->mt[2].x = SS4_BTL_MF_X_V2(p, 0);
1246 f->mt[3].x = SS4_BTL_MF_X_V2(p, 1);
1247 no_data_x = SS4_MFPACKET_NO_AX_BL;
1248 }
1249 no_data_y = SS4_MFPACKET_NO_AY_BL;
1250
1251 f->mt[2].y = SS4_BTL_MF_Y_V2(p, 0);
1252 f->mt[3].y = SS4_BTL_MF_Y_V2(p, 1);
1253 } else {
1254 if (IS_SS4PLUS_DEV(priv->dev_id)) {
1255 f->mt[2].x = SS4_PLUS_STD_MF_X_V2(p, 0);
1256 f->mt[3].x = SS4_PLUS_STD_MF_X_V2(p, 1);
1257 no_data_x = SS4_PLUS_MFPACKET_NO_AX;
1258 } else {
1259 f->mt[2].x = SS4_STD_MF_X_V2(p, 0);
1260 f->mt[3].x = SS4_STD_MF_X_V2(p, 1);
1261 no_data_x = SS4_MFPACKET_NO_AX;
1262 }
1263 no_data_y = SS4_MFPACKET_NO_AY;
1264
1265 f->mt[2].y = SS4_STD_MF_Y_V2(p, 0);
1266 f->mt[3].y = SS4_STD_MF_Y_V2(p, 1);
1267 }
1268
1269 f->first_mp = 0;
1270 f->is_mp = 1;
1271
1272 if (SS4_IS_5F_DETECTED(p)) {
1273 f->fingers = 5;
1274 } else if (f->mt[3].x == no_data_x &&
1275 f->mt[3].y == no_data_y) {
1276 f->mt[3].x = 0;
1277 f->mt[3].y = 0;
1278 f->fingers = 3;
1279 } else {
1280 f->fingers = 4;
1281 }
1282 break;
1283
1284 case SS4_PACKET_ID_STICK:
1285 /*
1286 * x, y, and pressure are decoded in
1287 * alps_process_packet_ss4_v2()
1288 */
1289 f->first_mp = 0;
1290 f->is_mp = 0;
1291 break;
1292
1293 case SS4_PACKET_ID_IDLE:
1294 default:
1295 memset(f, 0, sizeof(struct alps_fields));
1296 break;
1297 }
1298
1299 /* handle buttons */
1300 if (pkt_id == SS4_PACKET_ID_STICK) {
1301 f->ts_left = !!(SS4_BTN_V2(p) & 0x01);
1302 f->ts_right = !!(SS4_BTN_V2(p) & 0x02);
1303 f->ts_middle = !!(SS4_BTN_V2(p) & 0x04);
1304 } else {
1305 f->left = !!(SS4_BTN_V2(p) & 0x01);
1306 if (!(priv->flags & ALPS_BUTTONPAD)) {
1307 f->right = !!(SS4_BTN_V2(p) & 0x02);
1308 f->middle = !!(SS4_BTN_V2(p) & 0x04);
1309 }
1310 }
1311
1312 return 0;
1313}
1314
1315static void alps_process_packet_ss4_v2(struct psmouse *psmouse)
1316{
1317 struct alps_data *priv = psmouse->private;
1318 unsigned char *packet = psmouse->packet;
1319 struct input_dev *dev = psmouse->dev;
1320 struct input_dev *dev2 = priv->dev2;
1321 struct alps_fields *f = &priv->f;
1322
1323 memset(f, 0, sizeof(struct alps_fields));
1324 priv->decode_fields(f, packet, psmouse);
1325 if (priv->multi_packet) {
1326 /*
1327 * Sometimes the first packet will indicate a multi-packet
1328 * sequence, but sometimes the next multi-packet would not
1329 * come. Check for this, and when it happens process the
1330 * position packet as usual.
1331 */
1332 if (f->is_mp) {
1333 /* Now process the 1st packet */
1334 priv->decode_fields(f, priv->multi_data, psmouse);
1335 } else {
1336 priv->multi_packet = 0;
1337 }
1338 }
1339
1340 /*
1341 * "f.is_mp" would always be '0' after merging the 1st and 2nd packet.
1342 * When it is set, it means 2nd packet comes without 1st packet come.
1343 */
1344 if (f->is_mp)
1345 return;
1346
1347 /* Save the first packet */
1348 if (!priv->multi_packet && f->first_mp) {
1349 priv->multi_packet = 1;
1350 memcpy(priv->multi_data, packet, sizeof(priv->multi_data));
1351 return;
1352 }
1353
1354 priv->multi_packet = 0;
1355
1356 /* Report trackstick */
1357 if (alps_get_pkt_id_ss4_v2(packet) == SS4_PACKET_ID_STICK) {
1358 if (!(priv->flags & ALPS_DUALPOINT)) {
1359 psmouse_warn(psmouse,
1360 "Rejected trackstick packet from non DualPoint device");
1361 return;
1362 }
1363
1364 input_report_rel(dev2, REL_X, SS4_TS_X_V2(packet));
1365 input_report_rel(dev2, REL_Y, SS4_TS_Y_V2(packet));
1366 input_report_abs(dev2, ABS_PRESSURE, SS4_TS_Z_V2(packet));
1367
1368 input_report_key(dev2, BTN_LEFT, f->ts_left);
1369 input_report_key(dev2, BTN_RIGHT, f->ts_right);
1370 input_report_key(dev2, BTN_MIDDLE, f->ts_middle);
1371
1372 input_sync(dev2);
1373 return;
1374 }
1375
1376 /* Report touchpad */
1377 alps_report_mt_data(psmouse, (f->fingers <= 4) ? f->fingers : 4);
1378
1379 input_mt_report_finger_count(dev, f->fingers);
1380
1381 input_report_key(dev, BTN_LEFT, f->left);
1382 input_report_key(dev, BTN_RIGHT, f->right);
1383 input_report_key(dev, BTN_MIDDLE, f->middle);
1384
1385 input_report_abs(dev, ABS_PRESSURE, f->pressure);
1386 input_sync(dev);
1387}
1388
1389static bool alps_is_valid_package_ss4_v2(struct psmouse *psmouse)
1390{
1391 if (psmouse->pktcnt == 4 && ((psmouse->packet[3] & 0x08) != 0x08))
1392 return false;
1393 if (psmouse->pktcnt == 6 && ((psmouse->packet[5] & 0x10) != 0x0))
1394 return false;
1395 return true;
1396}
1397
1398static DEFINE_MUTEX(alps_mutex);
1399
1400static int alps_do_register_bare_ps2_mouse(struct alps_data *priv)
1401{
1402 struct psmouse *psmouse = priv->psmouse;
1403 struct input_dev *dev3;
1404 int error;
1405
1406 dev3 = input_allocate_device();
1407 if (!dev3) {
1408 psmouse_err(psmouse, "failed to allocate secondary device\n");
1409 return -ENOMEM;
1410 }
1411
1412 scnprintf(priv->phys3, sizeof(priv->phys3), "%s/%s",
1413 psmouse->ps2dev.serio->phys,
1414 (priv->dev2 ? "input2" : "input1"));
1415 dev3->phys = priv->phys3;
1416
1417 /*
1418 * format of input device name is: "protocol vendor name"
1419 * see function psmouse_switch_protocol() in psmouse-base.c
1420 */
1421 dev3->name = "PS/2 ALPS Mouse";
1422
1423 dev3->id.bustype = BUS_I8042;
1424 dev3->id.vendor = 0x0002;
1425 dev3->id.product = PSMOUSE_PS2;
1426 dev3->id.version = 0x0000;
1427 dev3->dev.parent = &psmouse->ps2dev.serio->dev;
1428
1429 input_set_capability(dev3, EV_REL, REL_X);
1430 input_set_capability(dev3, EV_REL, REL_Y);
1431 input_set_capability(dev3, EV_KEY, BTN_LEFT);
1432 input_set_capability(dev3, EV_KEY, BTN_RIGHT);
1433 input_set_capability(dev3, EV_KEY, BTN_MIDDLE);
1434
1435 __set_bit(INPUT_PROP_POINTER, dev3->propbit);
1436
1437 error = input_register_device(dev3);
1438 if (error) {
1439 psmouse_err(psmouse,
1440 "failed to register secondary device: %d\n",
1441 error);
1442 goto err_free_input;
1443 }
1444
1445 priv->dev3 = dev3;
1446 return 0;
1447
1448err_free_input:
1449 input_free_device(dev3);
1450 return error;
1451}
1452
1453static void alps_register_bare_ps2_mouse(struct work_struct *work)
1454{
1455 struct alps_data *priv = container_of(work, struct alps_data,
1456 dev3_register_work);
1457 int error;
1458
1459 guard(mutex)(&alps_mutex);
1460
1461 if (!priv->dev3) {
1462 error = alps_do_register_bare_ps2_mouse(priv);
1463 if (error) {
1464 /*
1465 * Save the error code so that we can detect that we
1466 * already tried to create the device.
1467 */
1468 priv->dev3 = ERR_PTR(error);
1469 }
1470 }
1471}
1472
1473static void alps_report_bare_ps2_packet(struct psmouse *psmouse,
1474 unsigned char packet[],
1475 bool report_buttons)
1476{
1477 struct alps_data *priv = psmouse->private;
1478 struct input_dev *dev, *dev2 = NULL;
1479
1480 /* Figure out which device to use to report the bare packet */
1481 if (priv->proto_version == ALPS_PROTO_V2 &&
1482 (priv->flags & ALPS_DUALPOINT)) {
1483 /* On V2 devices the DualPoint Stick reports bare packets */
1484 dev = priv->dev2;
1485 dev2 = psmouse->dev;
1486 } else if (unlikely(IS_ERR_OR_NULL(priv->dev3))) {
1487 /* Register dev3 mouse if we received PS/2 packet first time */
1488 if (!IS_ERR(priv->dev3))
1489 schedule_work(&priv->dev3_register_work);
1490 return;
1491 } else {
1492 dev = priv->dev3;
1493 }
1494
1495 if (report_buttons)
1496 alps_report_buttons(dev, dev2,
1497 packet[0] & 1, packet[0] & 2, packet[0] & 4);
1498
1499 psmouse_report_standard_motion(dev, packet);
1500
1501 input_sync(dev);
1502}
1503
1504static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse)
1505{
1506 struct alps_data *priv = psmouse->private;
1507
1508 if (psmouse->pktcnt < 6)
1509 return PSMOUSE_GOOD_DATA;
1510
1511 if (psmouse->pktcnt == 6) {
1512 /*
1513 * Start a timer to flush the packet if it ends up last
1514 * 6-byte packet in the stream. Timer needs to fire
1515 * psmouse core times out itself. 20 ms should be enough
1516 * to decide if we are getting more data or not.
1517 */
1518 mod_timer(&priv->timer, jiffies + msecs_to_jiffies(20));
1519 return PSMOUSE_GOOD_DATA;
1520 }
1521
1522 timer_delete(&priv->timer);
1523
1524 if (psmouse->packet[6] & 0x80) {
1525
1526 /*
1527 * Highest bit is set - that means we either had
1528 * complete ALPS packet and this is start of the
1529 * next packet or we got garbage.
1530 */
1531
1532 if (((psmouse->packet[3] |
1533 psmouse->packet[4] |
1534 psmouse->packet[5]) & 0x80) ||
1535 (!alps_is_valid_first_byte(priv, psmouse->packet[6]))) {
1536 psmouse_dbg(psmouse,
1537 "refusing packet %4ph (suspected interleaved ps/2)\n",
1538 psmouse->packet + 3);
1539 return PSMOUSE_BAD_DATA;
1540 }
1541
1542 priv->process_packet(psmouse);
1543
1544 /* Continue with the next packet */
1545 psmouse->packet[0] = psmouse->packet[6];
1546 psmouse->pktcnt = 1;
1547
1548 } else {
1549
1550 /*
1551 * High bit is 0 - that means that we indeed got a PS/2
1552 * packet in the middle of ALPS packet.
1553 *
1554 * There is also possibility that we got 6-byte ALPS
1555 * packet followed by 3-byte packet from trackpoint. We
1556 * can not distinguish between these 2 scenarios but
1557 * because the latter is unlikely to happen in course of
1558 * normal operation (user would need to press all
1559 * buttons on the pad and start moving trackpoint
1560 * without touching the pad surface) we assume former.
1561 * Even if we are wrong the wost thing that would happen
1562 * the cursor would jump but we should not get protocol
1563 * de-synchronization.
1564 */
1565
1566 alps_report_bare_ps2_packet(psmouse, &psmouse->packet[3],
1567 false);
1568
1569 /*
1570 * Continue with the standard ALPS protocol handling,
1571 * but make sure we won't process it as an interleaved
1572 * packet again, which may happen if all buttons are
1573 * pressed. To avoid this let's reset the 4th bit which
1574 * is normally 1.
1575 */
1576 psmouse->packet[3] = psmouse->packet[6] & 0xf7;
1577 psmouse->pktcnt = 4;
1578 }
1579
1580 return PSMOUSE_GOOD_DATA;
1581}
1582
1583static void alps_flush_packet(struct timer_list *t)
1584{
1585 struct alps_data *priv = timer_container_of(priv, t, timer);
1586 struct psmouse *psmouse = priv->psmouse;
1587
1588 guard(serio_pause_rx)(psmouse->ps2dev.serio);
1589
1590 if (psmouse->pktcnt == psmouse->pktsize) {
1591
1592 /*
1593 * We did not any more data in reasonable amount of time.
1594 * Validate the last 3 bytes and process as a standard
1595 * ALPS packet.
1596 */
1597 if ((psmouse->packet[3] |
1598 psmouse->packet[4] |
1599 psmouse->packet[5]) & 0x80) {
1600 psmouse_dbg(psmouse,
1601 "refusing packet %3ph (suspected interleaved ps/2)\n",
1602 psmouse->packet + 3);
1603 } else {
1604 priv->process_packet(psmouse);
1605 }
1606 psmouse->pktcnt = 0;
1607 }
1608}
1609
1610static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
1611{
1612 struct alps_data *priv = psmouse->private;
1613
1614 /*
1615 * Check if we are dealing with a bare PS/2 packet, presumably from
1616 * a device connected to the external PS/2 port. Because bare PS/2
1617 * protocol does not have enough constant bits to self-synchronize
1618 * properly we only do this if the device is fully synchronized.
1619 * Can not distinguish V8's first byte from PS/2 packet's
1620 */
1621 if (priv->proto_version != ALPS_PROTO_V8 &&
1622 !psmouse->out_of_sync_cnt &&
1623 (psmouse->packet[0] & 0xc8) == 0x08) {
1624
1625 if (psmouse->pktcnt == 3) {
1626 alps_report_bare_ps2_packet(psmouse, psmouse->packet,
1627 true);
1628 return PSMOUSE_FULL_PACKET;
1629 }
1630 return PSMOUSE_GOOD_DATA;
1631 }
1632
1633 /* Check for PS/2 packet stuffed in the middle of ALPS packet. */
1634
1635 if ((priv->flags & ALPS_PS2_INTERLEAVED) &&
1636 psmouse->pktcnt >= 4 && (psmouse->packet[3] & 0x0f) == 0x0f) {
1637 return alps_handle_interleaved_ps2(psmouse);
1638 }
1639
1640 if (!alps_is_valid_first_byte(priv, psmouse->packet[0])) {
1641 psmouse_dbg(psmouse,
1642 "refusing packet[0] = %x (mask0 = %x, byte0 = %x)\n",
1643 psmouse->packet[0], priv->mask0, priv->byte0);
1644 return PSMOUSE_BAD_DATA;
1645 }
1646
1647 /* Bytes 2 - pktsize should have 0 in the highest bit */
1648 if (priv->proto_version < ALPS_PROTO_V5 &&
1649 psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize &&
1650 (psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
1651 psmouse_dbg(psmouse, "refusing packet[%i] = %x\n",
1652 psmouse->pktcnt - 1,
1653 psmouse->packet[psmouse->pktcnt - 1]);
1654
1655 if (priv->proto_version == ALPS_PROTO_V3_RUSHMORE &&
1656 psmouse->pktcnt == psmouse->pktsize) {
1657 /*
1658 * Some Dell boxes, such as Latitude E6440 or E7440
1659 * with closed lid, quite often smash last byte of
1660 * otherwise valid packet with 0xff. Given that the
1661 * next packet is very likely to be valid let's
1662 * report PSMOUSE_FULL_PACKET but not process data,
1663 * rather than reporting PSMOUSE_BAD_DATA and
1664 * filling the logs.
1665 */
1666 return PSMOUSE_FULL_PACKET;
1667 }
1668
1669 return PSMOUSE_BAD_DATA;
1670 }
1671
1672 if ((priv->proto_version == ALPS_PROTO_V7 &&
1673 !alps_is_valid_package_v7(psmouse)) ||
1674 (priv->proto_version == ALPS_PROTO_V8 &&
1675 !alps_is_valid_package_ss4_v2(psmouse))) {
1676 psmouse_dbg(psmouse, "refusing packet[%i] = %x\n",
1677 psmouse->pktcnt - 1,
1678 psmouse->packet[psmouse->pktcnt - 1]);
1679 return PSMOUSE_BAD_DATA;
1680 }
1681
1682 if (psmouse->pktcnt == psmouse->pktsize) {
1683 priv->process_packet(psmouse);
1684 return PSMOUSE_FULL_PACKET;
1685 }
1686
1687 return PSMOUSE_GOOD_DATA;
1688}
1689
1690static int alps_command_mode_send_nibble(struct psmouse *psmouse, int nibble)
1691{
1692 struct ps2dev *ps2dev = &psmouse->ps2dev;
1693 struct alps_data *priv = psmouse->private;
1694 int command;
1695 unsigned char *param;
1696 unsigned char dummy[4];
1697
1698 BUG_ON(nibble > 0xf);
1699
1700 command = priv->nibble_commands[nibble].command;
1701 param = (command & 0x0f00) ?
1702 dummy : (unsigned char *)&priv->nibble_commands[nibble].data;
1703
1704 if (ps2_command(ps2dev, param, command))
1705 return -1;
1706
1707 return 0;
1708}
1709
1710static int alps_command_mode_set_addr(struct psmouse *psmouse, int addr)
1711{
1712 struct ps2dev *ps2dev = &psmouse->ps2dev;
1713 struct alps_data *priv = psmouse->private;
1714 int i, nibble;
1715
1716 if (ps2_command(ps2dev, NULL, priv->addr_command))
1717 return -1;
1718
1719 for (i = 12; i >= 0; i -= 4) {
1720 nibble = (addr >> i) & 0xf;
1721 if (alps_command_mode_send_nibble(psmouse, nibble))
1722 return -1;
1723 }
1724
1725 return 0;
1726}
1727
1728static int __alps_command_mode_read_reg(struct psmouse *psmouse, int addr)
1729{
1730 struct ps2dev *ps2dev = &psmouse->ps2dev;
1731 unsigned char param[4];
1732
1733 if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
1734 return -1;
1735
1736 /*
1737 * The address being read is returned in the first two bytes
1738 * of the result. Check that this address matches the expected
1739 * address.
1740 */
1741 if (addr != ((param[0] << 8) | param[1]))
1742 return -1;
1743
1744 return param[2];
1745}
1746
1747static int alps_command_mode_read_reg(struct psmouse *psmouse, int addr)
1748{
1749 if (alps_command_mode_set_addr(psmouse, addr))
1750 return -1;
1751 return __alps_command_mode_read_reg(psmouse, addr);
1752}
1753
1754static int __alps_command_mode_write_reg(struct psmouse *psmouse, u8 value)
1755{
1756 if (alps_command_mode_send_nibble(psmouse, (value >> 4) & 0xf))
1757 return -1;
1758 if (alps_command_mode_send_nibble(psmouse, value & 0xf))
1759 return -1;
1760 return 0;
1761}
1762
1763static int alps_command_mode_write_reg(struct psmouse *psmouse, int addr,
1764 u8 value)
1765{
1766 if (alps_command_mode_set_addr(psmouse, addr))
1767 return -1;
1768 return __alps_command_mode_write_reg(psmouse, value);
1769}
1770
1771static int alps_rpt_cmd(struct psmouse *psmouse, int init_command,
1772 int repeated_command, unsigned char *param)
1773{
1774 struct ps2dev *ps2dev = &psmouse->ps2dev;
1775
1776 param[0] = 0;
1777 if (init_command && ps2_command(ps2dev, param, init_command))
1778 return -EIO;
1779
1780 if (ps2_command(ps2dev, NULL, repeated_command) ||
1781 ps2_command(ps2dev, NULL, repeated_command) ||
1782 ps2_command(ps2dev, NULL, repeated_command))
1783 return -EIO;
1784
1785 param[0] = param[1] = param[2] = 0xff;
1786 if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
1787 return -EIO;
1788
1789 psmouse_dbg(psmouse, "%2.2X report: %3ph\n",
1790 repeated_command, param);
1791 return 0;
1792}
1793
1794static bool alps_check_valid_firmware_id(unsigned char id[])
1795{
1796 if (id[0] == 0x73)
1797 return true;
1798
1799 if (id[0] == 0x88 &&
1800 (id[1] == 0x07 ||
1801 id[1] == 0x08 ||
1802 (id[1] & 0xf0) == 0xb0 ||
1803 (id[1] & 0xf0) == 0xc0)) {
1804 return true;
1805 }
1806
1807 return false;
1808}
1809
1810static int alps_enter_command_mode(struct psmouse *psmouse)
1811{
1812 unsigned char param[4];
1813
1814 if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_RESET_WRAP, param)) {
1815 psmouse_err(psmouse, "failed to enter command mode\n");
1816 return -1;
1817 }
1818
1819 if (!alps_check_valid_firmware_id(param)) {
1820 psmouse_dbg(psmouse,
1821 "unknown response while entering command mode\n");
1822 return -1;
1823 }
1824 return 0;
1825}
1826
1827static inline int alps_exit_command_mode(struct psmouse *psmouse)
1828{
1829 struct ps2dev *ps2dev = &psmouse->ps2dev;
1830 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM))
1831 return -1;
1832 return 0;
1833}
1834
1835/*
1836 * For DualPoint devices select the device that should respond to
1837 * subsequent commands. It looks like glidepad is behind stickpointer,
1838 * I'd thought it would be other way around...
1839 */
1840static int alps_passthrough_mode_v2(struct psmouse *psmouse, bool enable)
1841{
1842 struct ps2dev *ps2dev = &psmouse->ps2dev;
1843 int cmd = enable ? PSMOUSE_CMD_SETSCALE21 : PSMOUSE_CMD_SETSCALE11;
1844
1845 if (ps2_command(ps2dev, NULL, cmd) ||
1846 ps2_command(ps2dev, NULL, cmd) ||
1847 ps2_command(ps2dev, NULL, cmd) ||
1848 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE))
1849 return -1;
1850
1851 /* we may get 3 more bytes, just ignore them */
1852 ps2_drain(ps2dev, 3, 100);
1853
1854 return 0;
1855}
1856
1857static int alps_absolute_mode_v1_v2(struct psmouse *psmouse)
1858{
1859 struct ps2dev *ps2dev = &psmouse->ps2dev;
1860
1861 /* Try ALPS magic knock - 4 disable before enable */
1862 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1863 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1864 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1865 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1866 ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE))
1867 return -1;
1868
1869 /*
1870 * Switch mouse to poll (remote) mode so motion data will not
1871 * get in our way
1872 */
1873 return ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL);
1874}
1875
1876static int alps_monitor_mode_send_word(struct psmouse *psmouse, u16 word)
1877{
1878 int i, nibble;
1879
1880 /*
1881 * b0-b11 are valid bits, send sequence is inverse.
1882 * e.g. when word = 0x0123, nibble send sequence is 3, 2, 1
1883 */
1884 for (i = 0; i <= 8; i += 4) {
1885 nibble = (word >> i) & 0xf;
1886 if (alps_command_mode_send_nibble(psmouse, nibble))
1887 return -1;
1888 }
1889
1890 return 0;
1891}
1892
1893static int alps_monitor_mode_write_reg(struct psmouse *psmouse,
1894 u16 addr, u16 value)
1895{
1896 struct ps2dev *ps2dev = &psmouse->ps2dev;
1897
1898 /* 0x0A0 is the command to write the word */
1899 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE) ||
1900 alps_monitor_mode_send_word(psmouse, 0x0A0) ||
1901 alps_monitor_mode_send_word(psmouse, addr) ||
1902 alps_monitor_mode_send_word(psmouse, value) ||
1903 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE))
1904 return -1;
1905
1906 return 0;
1907}
1908
1909static int alps_monitor_mode(struct psmouse *psmouse, bool enable)
1910{
1911 struct ps2dev *ps2dev = &psmouse->ps2dev;
1912
1913 if (enable) {
1914 /* EC E9 F5 F5 E7 E6 E7 E9 to enter monitor mode */
1915 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
1916 ps2_command(ps2dev, NULL, PSMOUSE_CMD_GETINFO) ||
1917 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1918 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1919 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
1920 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
1921 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
1922 ps2_command(ps2dev, NULL, PSMOUSE_CMD_GETINFO))
1923 return -1;
1924 } else {
1925 /* EC to exit monitor mode */
1926 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP))
1927 return -1;
1928 }
1929
1930 return 0;
1931}
1932
1933static int alps_absolute_mode_v6(struct psmouse *psmouse)
1934{
1935 u16 reg_val = 0x181;
1936 int ret;
1937
1938 /* enter monitor mode, to write the register */
1939 if (alps_monitor_mode(psmouse, true))
1940 return -1;
1941
1942 ret = alps_monitor_mode_write_reg(psmouse, 0x000, reg_val);
1943
1944 if (alps_monitor_mode(psmouse, false))
1945 ret = -1;
1946
1947 return ret;
1948}
1949
1950static int alps_get_status(struct psmouse *psmouse, char *param)
1951{
1952 /* Get status: 0xF5 0xF5 0xF5 0xE9 */
1953 if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_DISABLE, param))
1954 return -1;
1955
1956 return 0;
1957}
1958
1959/*
1960 * Turn touchpad tapping on or off. The sequences are:
1961 * 0xE9 0xF5 0xF5 0xF3 0x0A to enable,
1962 * 0xE9 0xF5 0xF5 0xE8 0x00 to disable.
1963 * My guess that 0xE9 (GetInfo) is here as a sync point.
1964 * For models that also have stickpointer (DualPoints) its tapping
1965 * is controlled separately (0xE6 0xE6 0xE6 0xF3 0x14|0x0A) but
1966 * we don't fiddle with it.
1967 */
1968static int alps_tap_mode(struct psmouse *psmouse, int enable)
1969{
1970 struct ps2dev *ps2dev = &psmouse->ps2dev;
1971 int cmd = enable ? PSMOUSE_CMD_SETRATE : PSMOUSE_CMD_SETRES;
1972 unsigned char tap_arg = enable ? 0x0A : 0x00;
1973 unsigned char param[4];
1974
1975 if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO) ||
1976 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1977 ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1978 ps2_command(ps2dev, &tap_arg, cmd))
1979 return -1;
1980
1981 if (alps_get_status(psmouse, param))
1982 return -1;
1983
1984 return 0;
1985}
1986
1987/*
1988 * alps_poll() - poll the touchpad for current motion packet.
1989 * Used in resync.
1990 */
1991static int alps_poll(struct psmouse *psmouse)
1992{
1993 struct alps_data *priv = psmouse->private;
1994 unsigned char buf[sizeof(psmouse->packet)];
1995 bool poll_failed;
1996
1997 if (priv->flags & ALPS_PASS)
1998 alps_passthrough_mode_v2(psmouse, true);
1999
2000 poll_failed = ps2_command(&psmouse->ps2dev, buf,
2001 PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)) < 0;
2002
2003 if (priv->flags & ALPS_PASS)
2004 alps_passthrough_mode_v2(psmouse, false);
2005
2006 if (poll_failed || (buf[0] & priv->mask0) != priv->byte0)
2007 return -1;
2008
2009 if ((psmouse->badbyte & 0xc8) == 0x08) {
2010/*
2011 * Poll the track stick ...
2012 */
2013 if (ps2_command(&psmouse->ps2dev, buf, PSMOUSE_CMD_POLL | (3 << 8)))
2014 return -1;
2015 }
2016
2017 memcpy(psmouse->packet, buf, sizeof(buf));
2018 return 0;
2019}
2020
2021static int alps_hw_init_v1_v2(struct psmouse *psmouse)
2022{
2023 struct alps_data *priv = psmouse->private;
2024
2025 if ((priv->flags & ALPS_PASS) &&
2026 alps_passthrough_mode_v2(psmouse, true)) {
2027 return -1;
2028 }
2029
2030 if (alps_tap_mode(psmouse, true)) {
2031 psmouse_warn(psmouse, "Failed to enable hardware tapping\n");
2032 return -1;
2033 }
2034
2035 if (alps_absolute_mode_v1_v2(psmouse)) {
2036 psmouse_err(psmouse, "Failed to enable absolute mode\n");
2037 return -1;
2038 }
2039
2040 if ((priv->flags & ALPS_PASS) &&
2041 alps_passthrough_mode_v2(psmouse, false)) {
2042 return -1;
2043 }
2044
2045 /* ALPS needs stream mode, otherwise it won't report any data */
2046 if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)) {
2047 psmouse_err(psmouse, "Failed to enable stream mode\n");
2048 return -1;
2049 }
2050
2051 return 0;
2052}
2053
2054/* Must be in passthrough mode when calling this function */
2055static int alps_trackstick_enter_extended_mode_v3_v6(struct psmouse *psmouse)
2056{
2057 unsigned char param[2] = {0xC8, 0x14};
2058
2059 if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
2060 ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
2061 ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
2062 ps2_command(&psmouse->ps2dev, &param[0], PSMOUSE_CMD_SETRATE) ||
2063 ps2_command(&psmouse->ps2dev, &param[1], PSMOUSE_CMD_SETRATE))
2064 return -1;
2065
2066 return 0;
2067}
2068
2069static int alps_hw_init_v6(struct psmouse *psmouse)
2070{
2071 int ret;
2072
2073 /* Enter passthrough mode to let trackpoint enter 6byte raw mode */
2074 if (alps_passthrough_mode_v2(psmouse, true))
2075 return -1;
2076
2077 ret = alps_trackstick_enter_extended_mode_v3_v6(psmouse);
2078
2079 if (alps_passthrough_mode_v2(psmouse, false))
2080 return -1;
2081
2082 if (ret)
2083 return ret;
2084
2085 if (alps_absolute_mode_v6(psmouse)) {
2086 psmouse_err(psmouse, "Failed to enable absolute mode\n");
2087 return -1;
2088 }
2089
2090 return 0;
2091}
2092
2093/*
2094 * Enable or disable passthrough mode to the trackstick.
2095 */
2096static int alps_passthrough_mode_v3(struct psmouse *psmouse,
2097 int reg_base, bool enable)
2098{
2099 int reg_val, ret = -1;
2100
2101 if (alps_enter_command_mode(psmouse))
2102 return -1;
2103
2104 reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x0008);
2105 if (reg_val == -1)
2106 goto error;
2107
2108 if (enable)
2109 reg_val |= 0x01;
2110 else
2111 reg_val &= ~0x01;
2112
2113 ret = __alps_command_mode_write_reg(psmouse, reg_val);
2114
2115error:
2116 if (alps_exit_command_mode(psmouse))
2117 ret = -1;
2118 return ret;
2119}
2120
2121/* Must be in command mode when calling this function */
2122static int alps_absolute_mode_v3(struct psmouse *psmouse)
2123{
2124 int reg_val;
2125
2126 reg_val = alps_command_mode_read_reg(psmouse, 0x0004);
2127 if (reg_val == -1)
2128 return -1;
2129
2130 reg_val |= 0x06;
2131 if (__alps_command_mode_write_reg(psmouse, reg_val))
2132 return -1;
2133
2134 return 0;
2135}
2136
2137static int alps_probe_trackstick_v3_v7(struct psmouse *psmouse, int reg_base)
2138{
2139 int ret = -EIO, reg_val;
2140
2141 if (alps_enter_command_mode(psmouse))
2142 goto error;
2143
2144 reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08);
2145 if (reg_val == -1)
2146 goto error;
2147
2148 /* bit 7: trackstick is present */
2149 ret = reg_val & 0x80 ? 0 : -ENODEV;
2150
2151error:
2152 alps_exit_command_mode(psmouse);
2153 return ret;
2154}
2155
2156static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base)
2157{
2158 int ret = 0;
2159 int reg_val;
2160 unsigned char param[4];
2161
2162 /*
2163 * We need to configure trackstick to report data for touchpad in
2164 * extended format. And also we need to tell touchpad to expect data
2165 * from trackstick in extended format. Without this configuration
2166 * trackstick packets sent from touchpad are in basic format which is
2167 * different from what we expect.
2168 */
2169
2170 if (alps_passthrough_mode_v3(psmouse, reg_base, true))
2171 return -EIO;
2172
2173 /*
2174 * E7 report for the trackstick
2175 *
2176 * There have been reports of failures to seem to trace back
2177 * to the above trackstick check failing. When these occur
2178 * this E7 report fails, so when that happens we continue
2179 * with the assumption that there isn't a trackstick after
2180 * all.
2181 */
2182 if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_SETSCALE21, param)) {
2183 psmouse_warn(psmouse, "Failed to initialize trackstick (E7 report failed)\n");
2184 ret = -ENODEV;
2185 } else {
2186 psmouse_dbg(psmouse, "trackstick E7 report: %3ph\n", param);
2187 if (alps_trackstick_enter_extended_mode_v3_v6(psmouse)) {
2188 psmouse_err(psmouse, "Failed to enter into trackstick extended mode\n");
2189 ret = -EIO;
2190 }
2191 }
2192
2193 if (alps_passthrough_mode_v3(psmouse, reg_base, false))
2194 return -EIO;
2195
2196 if (ret)
2197 return ret;
2198
2199 if (alps_enter_command_mode(psmouse))
2200 return -EIO;
2201
2202 reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08);
2203 if (reg_val == -1) {
2204 ret = -EIO;
2205 } else {
2206 /*
2207 * Tell touchpad that trackstick is now in extended mode.
2208 * If bit 1 isn't set the packet format is different.
2209 */
2210 reg_val |= BIT(1);
2211 if (__alps_command_mode_write_reg(psmouse, reg_val))
2212 ret = -EIO;
2213 }
2214
2215 if (alps_exit_command_mode(psmouse))
2216 return -EIO;
2217
2218 return ret;
2219}
2220
2221static int alps_hw_init_v3(struct psmouse *psmouse)
2222{
2223 struct alps_data *priv = psmouse->private;
2224 struct ps2dev *ps2dev = &psmouse->ps2dev;
2225 int reg_val;
2226 unsigned char param[4];
2227
2228 if ((priv->flags & ALPS_DUALPOINT) &&
2229 alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE) == -EIO)
2230 goto error;
2231
2232 if (alps_enter_command_mode(psmouse) ||
2233 alps_absolute_mode_v3(psmouse)) {
2234 psmouse_err(psmouse, "Failed to enter absolute mode\n");
2235 goto error;
2236 }
2237
2238 reg_val = alps_command_mode_read_reg(psmouse, 0x0006);
2239 if (reg_val == -1)
2240 goto error;
2241 if (__alps_command_mode_write_reg(psmouse, reg_val | 0x01))
2242 goto error;
2243
2244 reg_val = alps_command_mode_read_reg(psmouse, 0x0007);
2245 if (reg_val == -1)
2246 goto error;
2247 if (__alps_command_mode_write_reg(psmouse, reg_val | 0x01))
2248 goto error;
2249
2250 if (alps_command_mode_read_reg(psmouse, 0x0144) == -1)
2251 goto error;
2252 if (__alps_command_mode_write_reg(psmouse, 0x04))
2253 goto error;
2254
2255 if (alps_command_mode_read_reg(psmouse, 0x0159) == -1)
2256 goto error;
2257 if (__alps_command_mode_write_reg(psmouse, 0x03))
2258 goto error;
2259
2260 if (alps_command_mode_read_reg(psmouse, 0x0163) == -1)
2261 goto error;
2262 if (alps_command_mode_write_reg(psmouse, 0x0163, 0x03))
2263 goto error;
2264
2265 if (alps_command_mode_read_reg(psmouse, 0x0162) == -1)
2266 goto error;
2267 if (alps_command_mode_write_reg(psmouse, 0x0162, 0x04))
2268 goto error;
2269
2270 alps_exit_command_mode(psmouse);
2271
2272 /* Set rate and enable data reporting */
2273 param[0] = 0x64;
2274 if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE) ||
2275 ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) {
2276 psmouse_err(psmouse, "Failed to enable data reporting\n");
2277 return -1;
2278 }
2279
2280 return 0;
2281
2282error:
2283 /*
2284 * Leaving the touchpad in command mode will essentially render
2285 * it unusable until the machine reboots, so exit it here just
2286 * to be safe
2287 */
2288 alps_exit_command_mode(psmouse);
2289 return -1;
2290}
2291
2292static int alps_get_v3_v7_resolution(struct psmouse *psmouse, int reg_pitch)
2293{
2294 int reg, x_pitch, y_pitch, x_electrode, y_electrode, x_phys, y_phys;
2295 struct alps_data *priv = psmouse->private;
2296
2297 reg = alps_command_mode_read_reg(psmouse, reg_pitch);
2298 if (reg < 0)
2299 return reg;
2300
2301 x_pitch = (s8)(reg << 4) >> 4; /* sign extend lower 4 bits */
2302 x_pitch = 50 + 2 * x_pitch; /* In 0.1 mm units */
2303
2304 y_pitch = (s8)reg >> 4; /* sign extend upper 4 bits */
2305 y_pitch = 36 + 2 * y_pitch; /* In 0.1 mm units */
2306
2307 reg = alps_command_mode_read_reg(psmouse, reg_pitch + 1);
2308 if (reg < 0)
2309 return reg;
2310
2311 x_electrode = (s8)(reg << 4) >> 4; /* sign extend lower 4 bits */
2312 x_electrode = 17 + x_electrode;
2313
2314 y_electrode = (s8)reg >> 4; /* sign extend upper 4 bits */
2315 y_electrode = 13 + y_electrode;
2316
2317 x_phys = x_pitch * (x_electrode - 1); /* In 0.1 mm units */
2318 y_phys = y_pitch * (y_electrode - 1); /* In 0.1 mm units */
2319
2320 priv->x_res = priv->x_max * 10 / x_phys; /* units / mm */
2321 priv->y_res = priv->y_max * 10 / y_phys; /* units / mm */
2322
2323 psmouse_dbg(psmouse,
2324 "pitch %dx%d num-electrodes %dx%d physical size %dx%d mm res %dx%d\n",
2325 x_pitch, y_pitch, x_electrode, y_electrode,
2326 x_phys / 10, y_phys / 10, priv->x_res, priv->y_res);
2327
2328 return 0;
2329}
2330
2331static int alps_hw_init_rushmore_v3(struct psmouse *psmouse)
2332{
2333 struct alps_data *priv = psmouse->private;
2334 struct ps2dev *ps2dev = &psmouse->ps2dev;
2335 int reg_val, ret = -1;
2336
2337 if (priv->flags & ALPS_DUALPOINT) {
2338 reg_val = alps_setup_trackstick_v3(psmouse,
2339 ALPS_REG_BASE_RUSHMORE);
2340 if (reg_val == -EIO)
2341 goto error;
2342 }
2343
2344 if (alps_enter_command_mode(psmouse) ||
2345 alps_command_mode_read_reg(psmouse, 0xc2d9) == -1 ||
2346 alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00))
2347 goto error;
2348
2349 if (alps_get_v3_v7_resolution(psmouse, 0xc2da))
2350 goto error;
2351
2352 reg_val = alps_command_mode_read_reg(psmouse, 0xc2c6);
2353 if (reg_val == -1)
2354 goto error;
2355 if (__alps_command_mode_write_reg(psmouse, reg_val & 0xfd))
2356 goto error;
2357
2358 if (alps_command_mode_write_reg(psmouse, 0xc2c9, 0x64))
2359 goto error;
2360
2361 /* enter absolute mode */
2362 reg_val = alps_command_mode_read_reg(psmouse, 0xc2c4);
2363 if (reg_val == -1)
2364 goto error;
2365 if (__alps_command_mode_write_reg(psmouse, reg_val | 0x02))
2366 goto error;
2367
2368 alps_exit_command_mode(psmouse);
2369 return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
2370
2371error:
2372 alps_exit_command_mode(psmouse);
2373 return ret;
2374}
2375
2376/* Must be in command mode when calling this function */
2377static int alps_absolute_mode_v4(struct psmouse *psmouse)
2378{
2379 int reg_val;
2380
2381 reg_val = alps_command_mode_read_reg(psmouse, 0x0004);
2382 if (reg_val == -1)
2383 return -1;
2384
2385 reg_val |= 0x02;
2386 if (__alps_command_mode_write_reg(psmouse, reg_val))
2387 return -1;
2388
2389 return 0;
2390}
2391
2392static int alps_hw_init_v4(struct psmouse *psmouse)
2393{
2394 struct ps2dev *ps2dev = &psmouse->ps2dev;
2395 unsigned char param[4];
2396
2397 if (alps_enter_command_mode(psmouse))
2398 goto error;
2399
2400 if (alps_absolute_mode_v4(psmouse)) {
2401 psmouse_err(psmouse, "Failed to enter absolute mode\n");
2402 goto error;
2403 }
2404
2405 if (alps_command_mode_write_reg(psmouse, 0x0007, 0x8c))
2406 goto error;
2407
2408 if (alps_command_mode_write_reg(psmouse, 0x0149, 0x03))
2409 goto error;
2410
2411 if (alps_command_mode_write_reg(psmouse, 0x0160, 0x03))
2412 goto error;
2413
2414 if (alps_command_mode_write_reg(psmouse, 0x017f, 0x15))
2415 goto error;
2416
2417 if (alps_command_mode_write_reg(psmouse, 0x0151, 0x01))
2418 goto error;
2419
2420 if (alps_command_mode_write_reg(psmouse, 0x0168, 0x03))
2421 goto error;
2422
2423 if (alps_command_mode_write_reg(psmouse, 0x014a, 0x03))
2424 goto error;
2425
2426 if (alps_command_mode_write_reg(psmouse, 0x0161, 0x03))
2427 goto error;
2428
2429 alps_exit_command_mode(psmouse);
2430
2431 /*
2432 * This sequence changes the output from a 9-byte to an
2433 * 8-byte format. All the same data seems to be present,
2434 * just in a more compact format.
2435 */
2436 param[0] = 0xc8;
2437 param[1] = 0x64;
2438 param[2] = 0x50;
2439 if (ps2_command(ps2dev, &param[0], PSMOUSE_CMD_SETRATE) ||
2440 ps2_command(ps2dev, &param[1], PSMOUSE_CMD_SETRATE) ||
2441 ps2_command(ps2dev, &param[2], PSMOUSE_CMD_SETRATE) ||
2442 ps2_command(ps2dev, param, PSMOUSE_CMD_GETID))
2443 return -1;
2444
2445 /* Set rate and enable data reporting */
2446 param[0] = 0x64;
2447 if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE) ||
2448 ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) {
2449 psmouse_err(psmouse, "Failed to enable data reporting\n");
2450 return -1;
2451 }
2452
2453 return 0;
2454
2455error:
2456 /*
2457 * Leaving the touchpad in command mode will essentially render
2458 * it unusable until the machine reboots, so exit it here just
2459 * to be safe
2460 */
2461 alps_exit_command_mode(psmouse);
2462 return -1;
2463}
2464
2465static int alps_get_otp_values_ss4_v2(struct psmouse *psmouse,
2466 unsigned char index, unsigned char otp[])
2467{
2468 struct ps2dev *ps2dev = &psmouse->ps2dev;
2469
2470 switch (index) {
2471 case 0:
2472 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
2473 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
2474 ps2_command(ps2dev, otp, PSMOUSE_CMD_GETINFO))
2475 return -1;
2476
2477 break;
2478
2479 case 1:
2480 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) ||
2481 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) ||
2482 ps2_command(ps2dev, otp, PSMOUSE_CMD_GETINFO))
2483 return -1;
2484
2485 break;
2486 }
2487
2488 return 0;
2489}
2490
2491static int alps_update_device_area_ss4_v2(unsigned char otp[][4],
2492 struct alps_data *priv)
2493{
2494 int num_x_electrode;
2495 int num_y_electrode;
2496 int x_pitch, y_pitch, x_phys, y_phys;
2497
2498 if (IS_SS4PLUS_DEV(priv->dev_id)) {
2499 num_x_electrode =
2500 SS4PLUS_NUMSENSOR_XOFFSET + (otp[0][2] & 0x0F);
2501 num_y_electrode =
2502 SS4PLUS_NUMSENSOR_YOFFSET + ((otp[0][2] >> 4) & 0x0F);
2503
2504 priv->x_max =
2505 (num_x_electrode - 1) * SS4PLUS_COUNT_PER_ELECTRODE;
2506 priv->y_max =
2507 (num_y_electrode - 1) * SS4PLUS_COUNT_PER_ELECTRODE;
2508
2509 x_pitch = (otp[0][1] & 0x0F) + SS4PLUS_MIN_PITCH_MM;
2510 y_pitch = ((otp[0][1] >> 4) & 0x0F) + SS4PLUS_MIN_PITCH_MM;
2511
2512 } else {
2513 num_x_electrode =
2514 SS4_NUMSENSOR_XOFFSET + (otp[1][0] & 0x0F);
2515 num_y_electrode =
2516 SS4_NUMSENSOR_YOFFSET + ((otp[1][0] >> 4) & 0x0F);
2517
2518 priv->x_max =
2519 (num_x_electrode - 1) * SS4_COUNT_PER_ELECTRODE;
2520 priv->y_max =
2521 (num_y_electrode - 1) * SS4_COUNT_PER_ELECTRODE;
2522
2523 x_pitch = ((otp[1][2] >> 2) & 0x07) + SS4_MIN_PITCH_MM;
2524 y_pitch = ((otp[1][2] >> 5) & 0x07) + SS4_MIN_PITCH_MM;
2525 }
2526
2527 x_phys = x_pitch * (num_x_electrode - 1); /* In 0.1 mm units */
2528 y_phys = y_pitch * (num_y_electrode - 1); /* In 0.1 mm units */
2529
2530 priv->x_res = priv->x_max * 10 / x_phys; /* units / mm */
2531 priv->y_res = priv->y_max * 10 / y_phys; /* units / mm */
2532
2533 return 0;
2534}
2535
2536static int alps_update_btn_info_ss4_v2(unsigned char otp[][4],
2537 struct alps_data *priv)
2538{
2539 unsigned char is_btnless;
2540
2541 if (IS_SS4PLUS_DEV(priv->dev_id))
2542 is_btnless = (otp[1][0] >> 1) & 0x01;
2543 else
2544 is_btnless = (otp[1][1] >> 3) & 0x01;
2545
2546 if (is_btnless)
2547 priv->flags |= ALPS_BUTTONPAD;
2548
2549 return 0;
2550}
2551
2552static int alps_update_dual_info_ss4_v2(unsigned char otp[][4],
2553 struct alps_data *priv,
2554 struct psmouse *psmouse)
2555{
2556 bool is_dual = false;
2557 int reg_val = 0;
2558 struct ps2dev *ps2dev = &psmouse->ps2dev;
2559
2560 if (IS_SS4PLUS_DEV(priv->dev_id)) {
2561 is_dual = (otp[0][0] >> 4) & 0x01;
2562
2563 if (!is_dual) {
2564 /* For support TrackStick of Thinkpad L/E series */
2565 if (alps_exit_command_mode(psmouse) == 0 &&
2566 alps_enter_command_mode(psmouse) == 0) {
2567 reg_val = alps_command_mode_read_reg(psmouse,
2568 0xD7);
2569 }
2570 alps_exit_command_mode(psmouse);
2571 ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
2572
2573 if (reg_val == 0x0C || reg_val == 0x1D)
2574 is_dual = true;
2575 }
2576 }
2577
2578 if (is_dual)
2579 priv->flags |= ALPS_DUALPOINT |
2580 ALPS_DUALPOINT_WITH_PRESSURE;
2581
2582 return 0;
2583}
2584
2585static int alps_set_defaults_ss4_v2(struct psmouse *psmouse,
2586 struct alps_data *priv)
2587{
2588 unsigned char otp[2][4];
2589
2590 memset(otp, 0, sizeof(otp));
2591
2592 if (alps_get_otp_values_ss4_v2(psmouse, 1, &otp[1][0]) ||
2593 alps_get_otp_values_ss4_v2(psmouse, 0, &otp[0][0]))
2594 return -1;
2595
2596 alps_update_device_area_ss4_v2(otp, priv);
2597
2598 alps_update_btn_info_ss4_v2(otp, priv);
2599
2600 alps_update_dual_info_ss4_v2(otp, priv, psmouse);
2601
2602 return 0;
2603}
2604
2605static int alps_dolphin_get_device_area(struct psmouse *psmouse,
2606 struct alps_data *priv)
2607{
2608 struct ps2dev *ps2dev = &psmouse->ps2dev;
2609 unsigned char param[4] = {0};
2610 int num_x_electrode, num_y_electrode;
2611
2612 if (alps_enter_command_mode(psmouse))
2613 return -1;
2614
2615 param[0] = 0x0a;
2616 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
2617 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) ||
2618 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) ||
2619 ps2_command(ps2dev, &param[0], PSMOUSE_CMD_SETRATE) ||
2620 ps2_command(ps2dev, &param[0], PSMOUSE_CMD_SETRATE))
2621 return -1;
2622
2623 if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
2624 return -1;
2625
2626 /*
2627 * Dolphin's sensor line number is not fixed. It can be calculated
2628 * by adding the device's register value with DOLPHIN_PROFILE_X/YOFFSET.
2629 * Further more, we can get device's x_max and y_max by multiplying
2630 * sensor line number with DOLPHIN_COUNT_PER_ELECTRODE.
2631 *
2632 * e.g. When we get register's sensor_x = 11 & sensor_y = 8,
2633 * real sensor line number X = 11 + 8 = 19, and
2634 * real sensor line number Y = 8 + 1 = 9.
2635 * So, x_max = (19 - 1) * 64 = 1152, and
2636 * y_max = (9 - 1) * 64 = 512.
2637 */
2638 num_x_electrode = DOLPHIN_PROFILE_XOFFSET + (param[2] & 0x0F);
2639 num_y_electrode = DOLPHIN_PROFILE_YOFFSET + ((param[2] >> 4) & 0x0F);
2640 priv->x_bits = num_x_electrode;
2641 priv->y_bits = num_y_electrode;
2642 priv->x_max = (num_x_electrode - 1) * DOLPHIN_COUNT_PER_ELECTRODE;
2643 priv->y_max = (num_y_electrode - 1) * DOLPHIN_COUNT_PER_ELECTRODE;
2644
2645 if (alps_exit_command_mode(psmouse))
2646 return -1;
2647
2648 return 0;
2649}
2650
2651static int alps_hw_init_dolphin_v1(struct psmouse *psmouse)
2652{
2653 struct ps2dev *ps2dev = &psmouse->ps2dev;
2654 unsigned char param[2];
2655
2656 /* This is dolphin "v1" as empirically defined by florin9doi */
2657 param[0] = 0x64;
2658 param[1] = 0x28;
2659
2660 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
2661 ps2_command(ps2dev, &param[0], PSMOUSE_CMD_SETRATE) ||
2662 ps2_command(ps2dev, &param[1], PSMOUSE_CMD_SETRATE))
2663 return -1;
2664
2665 return 0;
2666}
2667
2668static int alps_hw_init_v7(struct psmouse *psmouse)
2669{
2670 struct ps2dev *ps2dev = &psmouse->ps2dev;
2671 int reg_val, ret = -1;
2672
2673 if (alps_enter_command_mode(psmouse) ||
2674 alps_command_mode_read_reg(psmouse, 0xc2d9) == -1)
2675 goto error;
2676
2677 if (alps_get_v3_v7_resolution(psmouse, 0xc397))
2678 goto error;
2679
2680 if (alps_command_mode_write_reg(psmouse, 0xc2c9, 0x64))
2681 goto error;
2682
2683 reg_val = alps_command_mode_read_reg(psmouse, 0xc2c4);
2684 if (reg_val == -1)
2685 goto error;
2686 if (__alps_command_mode_write_reg(psmouse, reg_val | 0x02))
2687 goto error;
2688
2689 alps_exit_command_mode(psmouse);
2690 return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
2691
2692error:
2693 alps_exit_command_mode(psmouse);
2694 return ret;
2695}
2696
2697static int alps_hw_init_ss4_v2(struct psmouse *psmouse)
2698{
2699 struct ps2dev *ps2dev = &psmouse->ps2dev;
2700 char param[2] = {0x64, 0x28};
2701 int ret = -1;
2702
2703 /* enter absolute mode */
2704 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
2705 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
2706 ps2_command(ps2dev, &param[0], PSMOUSE_CMD_SETRATE) ||
2707 ps2_command(ps2dev, &param[1], PSMOUSE_CMD_SETRATE)) {
2708 goto error;
2709 }
2710
2711 /* T.B.D. Decread noise packet number, delete in the future */
2712 if (alps_exit_command_mode(psmouse) ||
2713 alps_enter_command_mode(psmouse) ||
2714 alps_command_mode_write_reg(psmouse, 0x001D, 0x20)) {
2715 goto error;
2716 }
2717 alps_exit_command_mode(psmouse);
2718
2719 return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
2720
2721error:
2722 alps_exit_command_mode(psmouse);
2723 return ret;
2724}
2725
2726static int alps_set_protocol(struct psmouse *psmouse,
2727 struct alps_data *priv,
2728 const struct alps_protocol_info *protocol)
2729{
2730 psmouse->private = priv;
2731
2732 timer_setup(&priv->timer, alps_flush_packet, 0);
2733
2734 priv->proto_version = protocol->version;
2735 priv->byte0 = protocol->byte0;
2736 priv->mask0 = protocol->mask0;
2737 priv->flags = protocol->flags;
2738
2739 priv->x_max = 2000;
2740 priv->y_max = 1400;
2741 priv->x_bits = 15;
2742 priv->y_bits = 11;
2743
2744 switch (priv->proto_version) {
2745 case ALPS_PROTO_V1:
2746 case ALPS_PROTO_V2:
2747 priv->hw_init = alps_hw_init_v1_v2;
2748 priv->process_packet = alps_process_packet_v1_v2;
2749 priv->set_abs_params = alps_set_abs_params_st;
2750 priv->x_max = 1023;
2751 priv->y_max = 767;
2752 if (dmi_check_system(alps_dmi_has_separate_stick_buttons))
2753 priv->flags |= ALPS_STICK_BITS;
2754 break;
2755
2756 case ALPS_PROTO_V3:
2757 priv->hw_init = alps_hw_init_v3;
2758 priv->process_packet = alps_process_packet_v3;
2759 priv->set_abs_params = alps_set_abs_params_semi_mt;
2760 priv->decode_fields = alps_decode_pinnacle;
2761 priv->nibble_commands = alps_v3_nibble_commands;
2762 priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
2763
2764 if (alps_probe_trackstick_v3_v7(psmouse,
2765 ALPS_REG_BASE_PINNACLE) < 0)
2766 priv->flags &= ~ALPS_DUALPOINT;
2767
2768 break;
2769
2770 case ALPS_PROTO_V3_RUSHMORE:
2771 priv->hw_init = alps_hw_init_rushmore_v3;
2772 priv->process_packet = alps_process_packet_v3;
2773 priv->set_abs_params = alps_set_abs_params_semi_mt;
2774 priv->decode_fields = alps_decode_rushmore;
2775 priv->nibble_commands = alps_v3_nibble_commands;
2776 priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
2777 priv->x_bits = 16;
2778 priv->y_bits = 12;
2779
2780 if (alps_probe_trackstick_v3_v7(psmouse,
2781 ALPS_REG_BASE_RUSHMORE) < 0)
2782 priv->flags &= ~ALPS_DUALPOINT;
2783
2784 break;
2785
2786 case ALPS_PROTO_V4:
2787 priv->hw_init = alps_hw_init_v4;
2788 priv->process_packet = alps_process_packet_v4;
2789 priv->set_abs_params = alps_set_abs_params_semi_mt;
2790 priv->nibble_commands = alps_v4_nibble_commands;
2791 priv->addr_command = PSMOUSE_CMD_DISABLE;
2792 break;
2793
2794 case ALPS_PROTO_V5:
2795 priv->hw_init = alps_hw_init_dolphin_v1;
2796 priv->process_packet = alps_process_touchpad_packet_v3_v5;
2797 priv->decode_fields = alps_decode_dolphin;
2798 priv->set_abs_params = alps_set_abs_params_semi_mt;
2799 priv->nibble_commands = alps_v3_nibble_commands;
2800 priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
2801 priv->x_bits = 23;
2802 priv->y_bits = 12;
2803
2804 if (alps_dolphin_get_device_area(psmouse, priv))
2805 return -EIO;
2806
2807 break;
2808
2809 case ALPS_PROTO_V6:
2810 priv->hw_init = alps_hw_init_v6;
2811 priv->process_packet = alps_process_packet_v6;
2812 priv->set_abs_params = alps_set_abs_params_st;
2813 priv->nibble_commands = alps_v6_nibble_commands;
2814 priv->x_max = 2047;
2815 priv->y_max = 1535;
2816 break;
2817
2818 case ALPS_PROTO_V7:
2819 priv->hw_init = alps_hw_init_v7;
2820 priv->process_packet = alps_process_packet_v7;
2821 priv->decode_fields = alps_decode_packet_v7;
2822 priv->set_abs_params = alps_set_abs_params_v7;
2823 priv->nibble_commands = alps_v3_nibble_commands;
2824 priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
2825 priv->x_max = 0xfff;
2826 priv->y_max = 0x7ff;
2827
2828 if (priv->fw_ver[1] != 0xba)
2829 priv->flags |= ALPS_BUTTONPAD;
2830
2831 if (alps_probe_trackstick_v3_v7(psmouse, ALPS_REG_BASE_V7) < 0)
2832 priv->flags &= ~ALPS_DUALPOINT;
2833
2834 break;
2835
2836 case ALPS_PROTO_V8:
2837 priv->hw_init = alps_hw_init_ss4_v2;
2838 priv->process_packet = alps_process_packet_ss4_v2;
2839 priv->decode_fields = alps_decode_ss4_v2;
2840 priv->set_abs_params = alps_set_abs_params_ss4_v2;
2841 priv->nibble_commands = alps_v3_nibble_commands;
2842 priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
2843
2844 if (alps_set_defaults_ss4_v2(psmouse, priv))
2845 return -EIO;
2846
2847 break;
2848 }
2849
2850 return 0;
2851}
2852
2853static const struct alps_protocol_info *alps_match_table(unsigned char *e7,
2854 unsigned char *ec)
2855{
2856 const struct alps_model_info *model;
2857 int i;
2858
2859 for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) {
2860 model = &alps_model_data[i];
2861
2862 if (!memcmp(e7, model->signature, sizeof(model->signature)))
2863 return &model->protocol_info;
2864 }
2865
2866 return NULL;
2867}
2868
2869static bool alps_is_cs19_trackpoint(struct psmouse *psmouse)
2870{
2871 u8 param[2] = { 0 };
2872
2873 if (ps2_command(&psmouse->ps2dev,
2874 param, MAKE_PS2_CMD(0, 2, TP_READ_ID)))
2875 return false;
2876
2877 /*
2878 * param[0] contains the trackpoint device variant_id while
2879 * param[1] contains the firmware_id. So far all alps
2880 * trackpoint-only devices have their variant_ids equal
2881 * TP_VARIANT_ALPS and their firmware_ids are in 0x20~0x2f range.
2882 */
2883 return param[0] == TP_VARIANT_ALPS && ((param[1] & 0xf0) == 0x20);
2884}
2885
2886static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
2887{
2888 const struct alps_protocol_info *protocol;
2889 unsigned char e6[4], e7[4], ec[4];
2890 int error;
2891
2892 /*
2893 * First try "E6 report".
2894 * ALPS should return 0,0,10 or 0,0,100 if no buttons are pressed.
2895 * The bits 0-2 of the first byte will be 1s if some buttons are
2896 * pressed.
2897 */
2898 if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES,
2899 PSMOUSE_CMD_SETSCALE11, e6))
2900 return -EIO;
2901
2902 if ((e6[0] & 0xf8) != 0 || e6[1] != 0 || (e6[2] != 10 && e6[2] != 100))
2903 return -EINVAL;
2904
2905 /*
2906 * Now get the "E7" and "EC" reports. These will uniquely identify
2907 * most ALPS touchpads.
2908 */
2909 if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES,
2910 PSMOUSE_CMD_SETSCALE21, e7) ||
2911 alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES,
2912 PSMOUSE_CMD_RESET_WRAP, ec) ||
2913 alps_exit_command_mode(psmouse))
2914 return -EIO;
2915
2916 protocol = alps_match_table(e7, ec);
2917 if (!protocol) {
2918 if (e7[0] == 0x73 && e7[1] == 0x02 && e7[2] == 0x64 &&
2919 ec[2] == 0x8a) {
2920 protocol = &alps_v4_protocol_data;
2921 } else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 &&
2922 ec[0] == 0x73 && (ec[1] == 0x01 || ec[1] == 0x02)) {
2923 protocol = &alps_v5_protocol_data;
2924 } else if (ec[0] == 0x88 &&
2925 ((ec[1] & 0xf0) == 0xb0 || (ec[1] & 0xf0) == 0xc0)) {
2926 protocol = &alps_v7_protocol_data;
2927 } else if (ec[0] == 0x88 && ec[1] == 0x08) {
2928 protocol = &alps_v3_rushmore_data;
2929 } else if (ec[0] == 0x88 && ec[1] == 0x07 &&
2930 ec[2] >= 0x90 && ec[2] <= 0x9d) {
2931 protocol = &alps_v3_protocol_data;
2932 } else if (e7[0] == 0x73 && e7[1] == 0x03 &&
2933 (e7[2] == 0x14 || e7[2] == 0x28)) {
2934 protocol = &alps_v8_protocol_data;
2935 } else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0xc8) {
2936 protocol = &alps_v9_protocol_data;
2937 psmouse_warn(psmouse,
2938 "Unsupported ALPS V9 touchpad: E7=%3ph, EC=%3ph\n",
2939 e7, ec);
2940 return -EINVAL;
2941 } else {
2942 psmouse_dbg(psmouse,
2943 "Likely not an ALPS touchpad: E7=%3ph, EC=%3ph\n", e7, ec);
2944 return -EINVAL;
2945 }
2946 }
2947
2948 if (priv) {
2949 /* Save Device ID and Firmware version */
2950 memcpy(priv->dev_id, e7, 3);
2951 memcpy(priv->fw_ver, ec, 3);
2952 error = alps_set_protocol(psmouse, priv, protocol);
2953 if (error)
2954 return error;
2955 }
2956
2957 return 0;
2958}
2959
2960static int alps_reconnect(struct psmouse *psmouse)
2961{
2962 struct alps_data *priv = psmouse->private;
2963
2964 psmouse_reset(psmouse);
2965
2966 if (alps_identify(psmouse, priv) < 0)
2967 return -1;
2968
2969 return priv->hw_init(psmouse);
2970}
2971
2972static void alps_disconnect(struct psmouse *psmouse)
2973{
2974 struct alps_data *priv = psmouse->private;
2975
2976 psmouse_reset(psmouse);
2977 timer_shutdown_sync(&priv->timer);
2978 disable_work_sync(&priv->dev3_register_work);
2979 if (priv->dev2)
2980 input_unregister_device(priv->dev2);
2981 if (!IS_ERR_OR_NULL(priv->dev3))
2982 input_unregister_device(priv->dev3);
2983 kfree(priv);
2984}
2985
2986static void alps_set_abs_params_st(struct alps_data *priv,
2987 struct input_dev *dev1)
2988{
2989 input_set_abs_params(dev1, ABS_X, 0, priv->x_max, 0, 0);
2990 input_set_abs_params(dev1, ABS_Y, 0, priv->y_max, 0, 0);
2991 input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
2992}
2993
2994static void alps_set_abs_params_mt_common(struct alps_data *priv,
2995 struct input_dev *dev1)
2996{
2997 input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0);
2998 input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0);
2999
3000 input_abs_set_res(dev1, ABS_MT_POSITION_X, priv->x_res);
3001 input_abs_set_res(dev1, ABS_MT_POSITION_Y, priv->y_res);
3002
3003 set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit);
3004 set_bit(BTN_TOOL_QUADTAP, dev1->keybit);
3005}
3006
3007static void alps_set_abs_params_semi_mt(struct alps_data *priv,
3008 struct input_dev *dev1)
3009{
3010 alps_set_abs_params_mt_common(priv, dev1);
3011 input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
3012
3013 input_mt_init_slots(dev1, MAX_TOUCHES,
3014 INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED |
3015 INPUT_MT_SEMI_MT);
3016}
3017
3018static void alps_set_abs_params_v7(struct alps_data *priv,
3019 struct input_dev *dev1)
3020{
3021 alps_set_abs_params_mt_common(priv, dev1);
3022 set_bit(BTN_TOOL_QUINTTAP, dev1->keybit);
3023
3024 input_mt_init_slots(dev1, MAX_TOUCHES,
3025 INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED |
3026 INPUT_MT_TRACK);
3027
3028 set_bit(BTN_TOOL_QUINTTAP, dev1->keybit);
3029}
3030
3031static void alps_set_abs_params_ss4_v2(struct alps_data *priv,
3032 struct input_dev *dev1)
3033{
3034 alps_set_abs_params_mt_common(priv, dev1);
3035 input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
3036 set_bit(BTN_TOOL_QUINTTAP, dev1->keybit);
3037
3038 input_mt_init_slots(dev1, MAX_TOUCHES,
3039 INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED |
3040 INPUT_MT_TRACK);
3041}
3042
3043int alps_init(struct psmouse *psmouse)
3044{
3045 struct alps_data *priv = psmouse->private;
3046 struct input_dev *dev1 = psmouse->dev;
3047 int error;
3048
3049 error = priv->hw_init(psmouse);
3050 if (error)
3051 goto init_fail;
3052
3053 /*
3054 * Undo part of setup done for us by psmouse core since touchpad
3055 * is not a relative device.
3056 */
3057 __clear_bit(EV_REL, dev1->evbit);
3058 __clear_bit(REL_X, dev1->relbit);
3059 __clear_bit(REL_Y, dev1->relbit);
3060
3061 /*
3062 * Now set up our capabilities.
3063 */
3064 dev1->evbit[BIT_WORD(EV_KEY)] |= BIT_MASK(EV_KEY);
3065 dev1->keybit[BIT_WORD(BTN_TOUCH)] |= BIT_MASK(BTN_TOUCH);
3066 dev1->keybit[BIT_WORD(BTN_TOOL_FINGER)] |= BIT_MASK(BTN_TOOL_FINGER);
3067 dev1->keybit[BIT_WORD(BTN_LEFT)] |=
3068 BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
3069
3070 dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS);
3071
3072 priv->set_abs_params(priv, dev1);
3073
3074 if (priv->flags & ALPS_WHEEL) {
3075 dev1->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL);
3076 dev1->relbit[BIT_WORD(REL_WHEEL)] |= BIT_MASK(REL_WHEEL);
3077 }
3078
3079 if (priv->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
3080 dev1->keybit[BIT_WORD(BTN_FORWARD)] |= BIT_MASK(BTN_FORWARD);
3081 dev1->keybit[BIT_WORD(BTN_BACK)] |= BIT_MASK(BTN_BACK);
3082 }
3083
3084 if (priv->flags & ALPS_FOUR_BUTTONS) {
3085 dev1->keybit[BIT_WORD(BTN_0)] |= BIT_MASK(BTN_0);
3086 dev1->keybit[BIT_WORD(BTN_1)] |= BIT_MASK(BTN_1);
3087 dev1->keybit[BIT_WORD(BTN_2)] |= BIT_MASK(BTN_2);
3088 dev1->keybit[BIT_WORD(BTN_3)] |= BIT_MASK(BTN_3);
3089 } else if (priv->flags & ALPS_BUTTONPAD) {
3090 set_bit(INPUT_PROP_BUTTONPAD, dev1->propbit);
3091 clear_bit(BTN_RIGHT, dev1->keybit);
3092 } else {
3093 dev1->keybit[BIT_WORD(BTN_MIDDLE)] |= BIT_MASK(BTN_MIDDLE);
3094 }
3095
3096 if (priv->flags & ALPS_DUALPOINT) {
3097 struct input_dev *dev2;
3098
3099 dev2 = input_allocate_device();
3100 if (!dev2) {
3101 psmouse_err(psmouse,
3102 "failed to allocate trackstick device\n");
3103 error = -ENOMEM;
3104 goto init_fail;
3105 }
3106
3107 scnprintf(priv->phys2, sizeof(priv->phys2), "%s/input1",
3108 psmouse->ps2dev.serio->phys);
3109 dev2->phys = priv->phys2;
3110
3111 /*
3112 * format of input device name is: "protocol vendor name"
3113 * see function psmouse_switch_protocol() in psmouse-base.c
3114 */
3115 dev2->name = "AlpsPS/2 ALPS DualPoint Stick";
3116
3117 dev2->id.bustype = BUS_I8042;
3118 dev2->id.vendor = 0x0002;
3119 dev2->id.product = PSMOUSE_ALPS;
3120 dev2->id.version = priv->proto_version;
3121 dev2->dev.parent = &psmouse->ps2dev.serio->dev;
3122
3123 input_set_capability(dev2, EV_REL, REL_X);
3124 input_set_capability(dev2, EV_REL, REL_Y);
3125 if (priv->flags & ALPS_DUALPOINT_WITH_PRESSURE) {
3126 input_set_capability(dev2, EV_ABS, ABS_PRESSURE);
3127 input_set_abs_params(dev2, ABS_PRESSURE, 0, 127, 0, 0);
3128 }
3129 input_set_capability(dev2, EV_KEY, BTN_LEFT);
3130 input_set_capability(dev2, EV_KEY, BTN_RIGHT);
3131 input_set_capability(dev2, EV_KEY, BTN_MIDDLE);
3132
3133 __set_bit(INPUT_PROP_POINTER, dev2->propbit);
3134 __set_bit(INPUT_PROP_POINTING_STICK, dev2->propbit);
3135
3136 error = input_register_device(dev2);
3137 if (error) {
3138 psmouse_err(psmouse,
3139 "failed to register trackstick device: %d\n",
3140 error);
3141 input_free_device(dev2);
3142 goto init_fail;
3143 }
3144
3145 priv->dev2 = dev2;
3146 }
3147
3148 priv->psmouse = psmouse;
3149
3150 INIT_WORK(&priv->dev3_register_work, alps_register_bare_ps2_mouse);
3151
3152 psmouse->protocol_handler = alps_process_byte;
3153 psmouse->poll = alps_poll;
3154 psmouse->disconnect = alps_disconnect;
3155 psmouse->reconnect = alps_reconnect;
3156 psmouse->pktsize = priv->proto_version == ALPS_PROTO_V4 ? 8 : 6;
3157
3158 /* We are having trouble resyncing ALPS touchpads so disable it for now */
3159 psmouse->resync_time = 0;
3160
3161 /* Allow 2 invalid packets without resetting device */
3162 psmouse->resetafter = psmouse->pktsize * 2;
3163
3164 return 0;
3165
3166init_fail:
3167 psmouse_reset(psmouse);
3168 /*
3169 * Even though we did not allocate psmouse->private we do free
3170 * it here.
3171 */
3172 kfree(psmouse->private);
3173 psmouse->private = NULL;
3174 return error;
3175}
3176
3177int alps_detect(struct psmouse *psmouse, bool set_properties)
3178{
3179 struct alps_data *priv;
3180 int error;
3181
3182 error = alps_identify(psmouse, NULL);
3183 if (error)
3184 return error;
3185
3186 /*
3187 * ALPS cs19 is a trackpoint-only device, and uses different
3188 * protocol than DualPoint ones, so we return -EINVAL here and let
3189 * trackpoint.c drive this device. If the trackpoint driver is not
3190 * enabled, the device will fall back to a bare PS/2 mouse.
3191 * If ps2_command() fails here, we depend on the immediately
3192 * followed psmouse_reset() to reset the device to normal state.
3193 */
3194 if (alps_is_cs19_trackpoint(psmouse)) {
3195 psmouse_dbg(psmouse,
3196 "ALPS CS19 trackpoint-only device detected, ignoring\n");
3197 return -EINVAL;
3198 }
3199
3200 /*
3201 * Reset the device to make sure it is fully operational:
3202 * on some laptops, like certain Dell Latitudes, we may
3203 * fail to properly detect presence of trackstick if device
3204 * has not been reset.
3205 */
3206 psmouse_reset(psmouse);
3207
3208 priv = kzalloc_obj(*priv);
3209 if (!priv)
3210 return -ENOMEM;
3211
3212 error = alps_identify(psmouse, priv);
3213 if (error) {
3214 kfree(priv);
3215 return error;
3216 }
3217
3218 if (set_properties) {
3219 psmouse->vendor = "ALPS";
3220 psmouse->name = priv->flags & ALPS_DUALPOINT ?
3221 "DualPoint TouchPad" : "GlidePoint";
3222 psmouse->model = priv->proto_version;
3223 } else {
3224 /*
3225 * Destroy alps_data structure we allocated earlier since
3226 * this was just a "trial run". Otherwise we'll keep it
3227 * to be used by alps_init() which has to be called if
3228 * we succeed and set_properties is true.
3229 */
3230 kfree(priv);
3231 psmouse->private = NULL;
3232 }
3233
3234 return 0;
3235}
3236