| 1 | |
| 2 | |
| 3 | * Apple Z2 touchscreen driver
|
| 4 | *
|
| 5 | * Copyright (C) The Asahi Linux Contributors
|
| 6 |
|
| 7 |
|
| 8 | #include <linux/delay.h>
|
| 9 | #include <linux/firmware.h>
|
| 10 | #include <linux/input.h>
|
| 11 | #include <linux/input/mt.h>
|
| 12 | #include <linux/input/touchscreen.h>
|
| 13 | #include <linux/interrupt.h>
|
| 14 | #include <linux/module.h>
|
| 15 | #include <linux/of.h>
|
| 16 | #include <linux/spi/spi.h>
|
| 17 | #include <linux/unaligned.h>
|
| 18 |
|
| 19 | #define APPLE_Z2_NUM_FINGERS_OFFSET 16
|
| 20 | #define APPLE_Z2_FINGERS_OFFSET 24
|
| 21 | #define APPLE_Z2_TOUCH_STARTED 3
|
| 22 | #define APPLE_Z2_TOUCH_MOVED 4
|
| 23 | #define APPLE_Z2_CMD_READ_INTERRUPT_DATA 0xEB
|
| 24 | #define APPLE_Z2_REPLY_INTERRUPT_DATA 0xE1
|
| 25 | #define APPLE_Z2_HBPP_CMD_BLOB 0x3001
|
| 26 | #define APPLE_Z2_FW_MAGIC 0x5746325A
|
| 27 | #define LOAD_COMMAND_INIT_PAYLOAD 0
|
| 28 | #define LOAD_COMMAND_SEND_BLOB 1
|
| 29 | #define LOAD_COMMAND_SEND_CALIBRATION 2
|
| 30 | #define CAL_PROP_NAME "apple,z2-cal-blob"
|
| 31 |
|
| 32 | struct apple_z2 {
|
| 33 | struct spi_device *spidev;
|
| 34 | struct gpio_desc *reset_gpio;
|
| 35 | struct input_dev *input_dev;
|
| 36 | struct completion boot_irq;
|
| 37 | bool booted;
|
| 38 | int index_parity;
|
| 39 | struct touchscreen_properties props;
|
| 40 | const char *fw_name;
|
| 41 | u8 *tx_buf;
|
| 42 | u8 *rx_buf;
|
| 43 | };
|
| 44 |
|
| 45 | struct apple_z2_finger {
|
| 46 | u8 finger;
|
| 47 | u8 state;
|
| 48 | __le16 unknown2;
|
| 49 | __le16 abs_x;
|
| 50 | __le16 abs_y;
|
| 51 | __le16 rel_x;
|
| 52 | __le16 rel_y;
|
| 53 | __le16 tool_major;
|
| 54 | __le16 tool_minor;
|
| 55 | __le16 orientation;
|
| 56 | __le16 touch_major;
|
| 57 | __le16 touch_minor;
|
| 58 | __le16 unused[2];
|
| 59 | __le16 pressure;
|
| 60 | __le16 multi;
|
| 61 | } __packed;
|
| 62 |
|
| 63 | struct apple_z2_hbpp_blob_hdr {
|
| 64 | __le16 cmd;
|
| 65 | __le16 len;
|
| 66 | __le32 addr;
|
| 67 | __le16 checksum;
|
| 68 | };
|
| 69 |
|
| 70 | struct apple_z2_fw_hdr {
|
| 71 | __le32 magic;
|
| 72 | __le32 version;
|
| 73 | };
|
| 74 |
|
| 75 | struct apple_z2_read_interrupt_cmd {
|
| 76 | u8 cmd;
|
| 77 | u8 counter;
|
| 78 | u8 unused[12];
|
| 79 | __le16 checksum;
|
| 80 | };
|
| 81 |
|
| 82 | static void apple_z2_parse_touches(struct apple_z2 *z2,
|
| 83 | const u8 *msg, size_t msg_len)
|
| 84 | {
|
| 85 | int i;
|
| 86 | int nfingers;
|
| 87 | int slot;
|
| 88 | int slot_valid;
|
| 89 | struct apple_z2_finger *fingers;
|
| 90 |
|
| 91 | if (msg_len <= APPLE_Z2_NUM_FINGERS_OFFSET)
|
| 92 | return;
|
| 93 | nfingers = msg[APPLE_Z2_NUM_FINGERS_OFFSET];
|
| 94 | fingers = (struct apple_z2_finger *)(msg + APPLE_Z2_FINGERS_OFFSET);
|
| 95 | for (i = 0; i < nfingers; i++) {
|
| 96 | slot = input_mt_get_slot_by_key(z2->input_dev, fingers[i].finger);
|
| 97 | if (slot < 0) {
|
| 98 | dev_warn(&z2->spidev->dev, "unable to get slot for finger\n");
|
| 99 | continue;
|
| 100 | }
|
| 101 | slot_valid = fingers[i].state == APPLE_Z2_TOUCH_STARTED ||
|
| 102 | fingers[i].state == APPLE_Z2_TOUCH_MOVED;
|
| 103 | input_mt_slot(z2->input_dev, slot);
|
| 104 | if (!input_mt_report_slot_state(z2->input_dev, MT_TOOL_FINGER, slot_valid))
|
| 105 | continue;
|
| 106 | touchscreen_report_pos(z2->input_dev, &z2->props,
|
| 107 | le16_to_cpu(fingers[i].abs_x),
|
| 108 | le16_to_cpu(fingers[i].abs_y),
|
| 109 | true);
|
| 110 | input_report_abs(z2->input_dev, ABS_MT_WIDTH_MAJOR,
|
| 111 | le16_to_cpu(fingers[i].tool_major));
|
| 112 | input_report_abs(z2->input_dev, ABS_MT_WIDTH_MINOR,
|
| 113 | le16_to_cpu(fingers[i].tool_minor));
|
| 114 | input_report_abs(z2->input_dev, ABS_MT_ORIENTATION,
|
| 115 | le16_to_cpu(fingers[i].orientation));
|
| 116 | input_report_abs(z2->input_dev, ABS_MT_TOUCH_MAJOR,
|
| 117 | le16_to_cpu(fingers[i].touch_major));
|
| 118 | input_report_abs(z2->input_dev, ABS_MT_TOUCH_MINOR,
|
| 119 | le16_to_cpu(fingers[i].touch_minor));
|
| 120 | }
|
| 121 | input_mt_sync_frame(z2->input_dev);
|
| 122 | input_sync(z2->input_dev);
|
| 123 | }
|
| 124 |
|
| 125 | static int apple_z2_read_packet(struct apple_z2 *z2)
|
| 126 | {
|
| 127 | struct apple_z2_read_interrupt_cmd *len_cmd = (void *)z2->tx_buf;
|
| 128 | struct spi_transfer xfer;
|
| 129 | int error;
|
| 130 | size_t pkt_len;
|
| 131 |
|
| 132 | memset(&xfer, 0, sizeof(xfer));
|
| 133 | len_cmd->cmd = APPLE_Z2_CMD_READ_INTERRUPT_DATA;
|
| 134 | len_cmd->counter = z2->index_parity + 1;
|
| 135 | len_cmd->checksum =
|
| 136 | cpu_to_le16(APPLE_Z2_CMD_READ_INTERRUPT_DATA + len_cmd->counter);
|
| 137 | z2->index_parity = !z2->index_parity;
|
| 138 | xfer.tx_buf = z2->tx_buf;
|
| 139 | xfer.rx_buf = z2->rx_buf;
|
| 140 | xfer.len = sizeof(*len_cmd);
|
| 141 |
|
| 142 | error = spi_sync_transfer(z2->spidev, &xfer, 1);
|
| 143 | if (error)
|
| 144 | return error;
|
| 145 |
|
| 146 | if (z2->rx_buf[0] != APPLE_Z2_REPLY_INTERRUPT_DATA)
|
| 147 | return 0;
|
| 148 |
|
| 149 | pkt_len = (get_unaligned_le16(z2->rx_buf + 1) + 8) & 0xfffffffc;
|
| 150 |
|
| 151 | error = spi_read(z2->spidev, z2->rx_buf, pkt_len);
|
| 152 | if (error)
|
| 153 | return error;
|
| 154 |
|
| 155 | apple_z2_parse_touches(z2, z2->rx_buf + 5, pkt_len - 5);
|
| 156 |
|
| 157 | return 0;
|
| 158 | }
|
| 159 |
|
| 160 | static irqreturn_t apple_z2_irq(int irq, void *data)
|
| 161 | {
|
| 162 | struct apple_z2 *z2 = data;
|
| 163 |
|
| 164 | if (unlikely(!z2->booted))
|
| 165 | complete(&z2->boot_irq);
|
| 166 | else
|
| 167 | apple_z2_read_packet(z2);
|
| 168 |
|
| 169 | return IRQ_HANDLED;
|
| 170 | }
|
| 171 |
|
| 172 |
|
| 173 | static const u8 *apple_z2_build_cal_blob(struct apple_z2 *z2,
|
| 174 | u32 address, size_t *size)
|
| 175 | {
|
| 176 | u8 *cal_data;
|
| 177 | int cal_size;
|
| 178 | size_t blob_size;
|
| 179 | u32 checksum;
|
| 180 | u16 checksum_hdr;
|
| 181 | int i;
|
| 182 | struct apple_z2_hbpp_blob_hdr *hdr;
|
| 183 | int error;
|
| 184 |
|
| 185 | if (!device_property_present(&z2->spidev->dev, CAL_PROP_NAME))
|
| 186 | return NULL;
|
| 187 |
|
| 188 | cal_size = device_property_count_u8(&z2->spidev->dev, CAL_PROP_NAME);
|
| 189 | if (cal_size < 0)
|
| 190 | return ERR_PTR(cal_size);
|
| 191 |
|
| 192 | blob_size = sizeof(struct apple_z2_hbpp_blob_hdr) + cal_size + sizeof(__le32);
|
| 193 | u8 *blob_data __free(kfree) = kzalloc(blob_size, GFP_KERNEL);
|
| 194 | if (!blob_data)
|
| 195 | return ERR_PTR(-ENOMEM);
|
| 196 |
|
| 197 | hdr = (struct apple_z2_hbpp_blob_hdr *)blob_data;
|
| 198 | hdr->cmd = cpu_to_le16(APPLE_Z2_HBPP_CMD_BLOB);
|
| 199 | hdr->len = cpu_to_le16(round_up(cal_size, 4) / 4);
|
| 200 | hdr->addr = cpu_to_le32(address);
|
| 201 |
|
| 202 | checksum_hdr = 0;
|
| 203 | for (i = 2; i < 8; i++)
|
| 204 | checksum_hdr += blob_data[i];
|
| 205 | hdr->checksum = cpu_to_le16(checksum_hdr);
|
| 206 |
|
| 207 | cal_data = blob_data + sizeof(struct apple_z2_hbpp_blob_hdr);
|
| 208 | error = device_property_read_u8_array(&z2->spidev->dev, CAL_PROP_NAME,
|
| 209 | cal_data, cal_size);
|
| 210 | if (error)
|
| 211 | return ERR_PTR(error);
|
| 212 |
|
| 213 | checksum = 0;
|
| 214 | for (i = 0; i < cal_size; i++)
|
| 215 | checksum += cal_data[i];
|
| 216 | put_unaligned_le32(checksum, cal_data + cal_size);
|
| 217 |
|
| 218 | *size = blob_size;
|
| 219 | return no_free_ptr(blob_data);
|
| 220 | }
|
| 221 |
|
| 222 | static int apple_z2_send_firmware_blob(struct apple_z2 *z2, const u8 *data,
|
| 223 | u32 size, bool init)
|
| 224 | {
|
| 225 | struct spi_message msg;
|
| 226 | struct spi_transfer blob_xfer, ack_xfer;
|
| 227 | int error;
|
| 228 |
|
| 229 | z2->tx_buf[0] = 0x1a;
|
| 230 | z2->tx_buf[1] = 0xa1;
|
| 231 |
|
| 232 | spi_message_init(&msg);
|
| 233 | memset(&blob_xfer, 0, sizeof(blob_xfer));
|
| 234 | memset(&ack_xfer, 0, sizeof(ack_xfer));
|
| 235 |
|
| 236 | blob_xfer.tx_buf = data;
|
| 237 | blob_xfer.len = size;
|
| 238 | blob_xfer.bits_per_word = init ? 8 : 16;
|
| 239 | spi_message_add_tail(&blob_xfer, &msg);
|
| 240 |
|
| 241 | ack_xfer.tx_buf = z2->tx_buf;
|
| 242 | ack_xfer.len = 2;
|
| 243 | spi_message_add_tail(&ack_xfer, &msg);
|
| 244 |
|
| 245 | reinit_completion(&z2->boot_irq);
|
| 246 | error = spi_sync(z2->spidev, &msg);
|
| 247 | if (error)
|
| 248 | return error;
|
| 249 |
|
| 250 |
|
| 251 | wait_for_completion_timeout(&z2->boot_irq, msecs_to_jiffies(20));
|
| 252 |
|
| 253 | return 0;
|
| 254 | }
|
| 255 |
|
| 256 | static int apple_z2_upload_firmware(struct apple_z2 *z2)
|
| 257 | {
|
| 258 | const struct apple_z2_fw_hdr *fw_hdr;
|
| 259 | size_t fw_idx = sizeof(struct apple_z2_fw_hdr);
|
| 260 | int error;
|
| 261 | u32 load_cmd;
|
| 262 | u32 address;
|
| 263 | bool init;
|
| 264 | size_t size;
|
| 265 |
|
| 266 | const struct firmware *fw __free(firmware) = NULL;
|
| 267 | error = request_firmware(&fw, z2->fw_name, &z2->spidev->dev);
|
| 268 | if (error) {
|
| 269 | dev_err(&z2->spidev->dev, "unable to load firmware\n");
|
| 270 | return error;
|
| 271 | }
|
| 272 |
|
| 273 | fw_hdr = (const struct apple_z2_fw_hdr *)fw->data;
|
| 274 | if (le32_to_cpu(fw_hdr->magic) != APPLE_Z2_FW_MAGIC || le32_to_cpu(fw_hdr->version) != 1) {
|
| 275 | dev_err(&z2->spidev->dev, "invalid firmware header\n");
|
| 276 | return -EINVAL;
|
| 277 | }
|
| 278 |
|
| 279 | |
| 280 | * This will interrupt the upload half-way if the file is malformed
|
| 281 | * As the device has no non-volatile storage to corrupt, and gets reset
|
| 282 | * on boot anyway, this is fine.
|
| 283 |
|
| 284 | while (fw_idx < fw->size) {
|
| 285 | if (fw->size - fw_idx < 8) {
|
| 286 | dev_err(&z2->spidev->dev, "firmware malformed\n");
|
| 287 | return -EINVAL;
|
| 288 | }
|
| 289 |
|
| 290 | load_cmd = le32_to_cpup((__force __le32 *)(fw->data + fw_idx));
|
| 291 | fw_idx += sizeof(u32);
|
| 292 | if (load_cmd == LOAD_COMMAND_INIT_PAYLOAD || load_cmd == LOAD_COMMAND_SEND_BLOB) {
|
| 293 | size = le32_to_cpup((__force __le32 *)(fw->data + fw_idx));
|
| 294 | fw_idx += sizeof(u32);
|
| 295 | if (fw->size - fw_idx < size) {
|
| 296 | dev_err(&z2->spidev->dev, "firmware malformed\n");
|
| 297 | return -EINVAL;
|
| 298 | }
|
| 299 | init = load_cmd == LOAD_COMMAND_INIT_PAYLOAD;
|
| 300 | error = apple_z2_send_firmware_blob(z2, fw->data + fw_idx,
|
| 301 | size, init);
|
| 302 | if (error)
|
| 303 | return error;
|
| 304 | fw_idx += size;
|
| 305 | } else if (load_cmd == LOAD_COMMAND_SEND_CALIBRATION) {
|
| 306 | address = le32_to_cpup((__force __le32 *)(fw->data + fw_idx));
|
| 307 | fw_idx += sizeof(u32);
|
| 308 |
|
| 309 | const u8 *data __free(kfree) =
|
| 310 | apple_z2_build_cal_blob(z2, address, &size);
|
| 311 | if (IS_ERR(data))
|
| 312 | return PTR_ERR(data);
|
| 313 |
|
| 314 | if (data) {
|
| 315 | error = apple_z2_send_firmware_blob(z2, data, size, false);
|
| 316 | if (error)
|
| 317 | return error;
|
| 318 | }
|
| 319 | } else {
|
| 320 | dev_err(&z2->spidev->dev, "firmware malformed\n");
|
| 321 | return -EINVAL;
|
| 322 | }
|
| 323 | fw_idx = round_up(fw_idx, 4);
|
| 324 | }
|
| 325 |
|
| 326 |
|
| 327 | z2->booted = true;
|
| 328 | apple_z2_read_packet(z2);
|
| 329 | return 0;
|
| 330 | }
|
| 331 |
|
| 332 | static int apple_z2_boot(struct apple_z2 *z2)
|
| 333 | {
|
| 334 | int error;
|
| 335 |
|
| 336 | reinit_completion(&z2->boot_irq);
|
| 337 | enable_irq(z2->spidev->irq);
|
| 338 | gpiod_set_value(z2->reset_gpio, 0);
|
| 339 | if (!wait_for_completion_timeout(&z2->boot_irq, msecs_to_jiffies(20)))
|
| 340 | return -ETIMEDOUT;
|
| 341 |
|
| 342 | error = apple_z2_upload_firmware(z2);
|
| 343 | if (error) {
|
| 344 | gpiod_set_value(z2->reset_gpio, 1);
|
| 345 | disable_irq(z2->spidev->irq);
|
| 346 | return error;
|
| 347 | }
|
| 348 |
|
| 349 | return 0;
|
| 350 | }
|
| 351 |
|
| 352 | static int apple_z2_probe(struct spi_device *spi)
|
| 353 | {
|
| 354 | struct device *dev = &spi->dev;
|
| 355 | struct apple_z2 *z2;
|
| 356 | int error;
|
| 357 |
|
| 358 | z2 = devm_kzalloc(dev, sizeof(*z2), GFP_KERNEL);
|
| 359 | if (!z2)
|
| 360 | return -ENOMEM;
|
| 361 |
|
| 362 | z2->tx_buf = devm_kzalloc(dev, sizeof(struct apple_z2_read_interrupt_cmd), GFP_KERNEL);
|
| 363 | if (!z2->tx_buf)
|
| 364 | return -ENOMEM;
|
| 365 |
|
| 366 | z2->rx_buf = devm_kzalloc(dev, 4000, GFP_KERNEL);
|
| 367 | if (!z2->rx_buf)
|
| 368 | return -ENOMEM;
|
| 369 |
|
| 370 | z2->spidev = spi;
|
| 371 | init_completion(&z2->boot_irq);
|
| 372 | spi_set_drvdata(spi, z2);
|
| 373 |
|
| 374 |
|
| 375 | z2->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
|
| 376 | if (IS_ERR(z2->reset_gpio))
|
| 377 | return dev_err_probe(dev, PTR_ERR(z2->reset_gpio), "unable to get reset\n");
|
| 378 |
|
| 379 | error = devm_request_threaded_irq(dev, z2->spidev->irq, NULL, apple_z2_irq,
|
| 380 | IRQF_ONESHOT | IRQF_NO_AUTOEN,
|
| 381 | "apple-z2-irq", z2);
|
| 382 | if (error)
|
| 383 | return dev_err_probe(dev, error, "unable to request irq\n");
|
| 384 |
|
| 385 | error = device_property_read_string(dev, "firmware-name", &z2->fw_name);
|
| 386 | if (error)
|
| 387 | return dev_err_probe(dev, error, "unable to get firmware name\n");
|
| 388 |
|
| 389 | z2->input_dev = devm_input_allocate_device(dev);
|
| 390 | if (!z2->input_dev)
|
| 391 | return -ENOMEM;
|
| 392 |
|
| 393 | z2->input_dev->name = (char *)spi_get_device_id(spi)->driver_data;
|
| 394 | z2->input_dev->phys = "apple_z2";
|
| 395 | z2->input_dev->id.bustype = BUS_SPI;
|
| 396 |
|
| 397 |
|
| 398 | input_set_abs_params(z2->input_dev, ABS_MT_POSITION_X, 0, 0, 0, 0);
|
| 399 | input_set_abs_params(z2->input_dev, ABS_MT_POSITION_Y, 0, 0, 0, 0);
|
| 400 | touchscreen_parse_properties(z2->input_dev, true, &z2->props);
|
| 401 | input_abs_set_res(z2->input_dev, ABS_MT_POSITION_X, 100);
|
| 402 | input_abs_set_res(z2->input_dev, ABS_MT_POSITION_Y, 100);
|
| 403 | input_set_abs_params(z2->input_dev, ABS_MT_WIDTH_MAJOR, 0, 65535, 0, 0);
|
| 404 | input_set_abs_params(z2->input_dev, ABS_MT_WIDTH_MINOR, 0, 65535, 0, 0);
|
| 405 | input_set_abs_params(z2->input_dev, ABS_MT_TOUCH_MAJOR, 0, 65535, 0, 0);
|
| 406 | input_set_abs_params(z2->input_dev, ABS_MT_TOUCH_MINOR, 0, 65535, 0, 0);
|
| 407 | input_set_abs_params(z2->input_dev, ABS_MT_ORIENTATION, -32768, 32767, 0, 0);
|
| 408 |
|
| 409 | error = input_mt_init_slots(z2->input_dev, 256, INPUT_MT_DIRECT);
|
| 410 | if (error)
|
| 411 | return dev_err_probe(dev, error, "unable to initialize multitouch slots\n");
|
| 412 |
|
| 413 | error = input_register_device(z2->input_dev);
|
| 414 | if (error)
|
| 415 | return dev_err_probe(dev, error, "unable to register input device\n");
|
| 416 |
|
| 417 |
|
| 418 | usleep_range(5000, 10000);
|
| 419 | error = apple_z2_boot(z2);
|
| 420 | if (error)
|
| 421 | return error;
|
| 422 |
|
| 423 | return 0;
|
| 424 | }
|
| 425 |
|
| 426 | static void apple_z2_shutdown(struct spi_device *spi)
|
| 427 | {
|
| 428 | struct apple_z2 *z2 = spi_get_drvdata(spi);
|
| 429 |
|
| 430 | disable_irq(z2->spidev->irq);
|
| 431 | gpiod_direction_output(z2->reset_gpio, 1);
|
| 432 | z2->booted = false;
|
| 433 | }
|
| 434 |
|
| 435 | static int apple_z2_suspend(struct device *dev)
|
| 436 | {
|
| 437 | apple_z2_shutdown(to_spi_device(dev));
|
| 438 |
|
| 439 | return 0;
|
| 440 | }
|
| 441 |
|
| 442 | static int apple_z2_resume(struct device *dev)
|
| 443 | {
|
| 444 | struct apple_z2 *z2 = spi_get_drvdata(to_spi_device(dev));
|
| 445 |
|
| 446 | return apple_z2_boot(z2);
|
| 447 | }
|
| 448 |
|
| 449 | static DEFINE_SIMPLE_DEV_PM_OPS(apple_z2_pm, apple_z2_suspend, apple_z2_resume);
|
| 450 |
|
| 451 | static const struct of_device_id apple_z2_of_match[] = {
|
| 452 | { .compatible = "apple,j293-touchbar" },
|
| 453 | { .compatible = "apple,j493-touchbar" },
|
| 454 | {}
|
| 455 | };
|
| 456 | MODULE_DEVICE_TABLE(of, apple_z2_of_match);
|
| 457 |
|
| 458 | static struct spi_device_id apple_z2_of_id[] = {
|
| 459 | { .name = "j293-touchbar", .driver_data = (kernel_ulong_t)"MacBookPro17,1 Touch Bar" },
|
| 460 | { .name = "j493-touchbar", .driver_data = (kernel_ulong_t)"Mac14,7 Touch Bar" },
|
| 461 | {}
|
| 462 | };
|
| 463 | MODULE_DEVICE_TABLE(spi, apple_z2_of_id);
|
| 464 |
|
| 465 | static struct spi_driver apple_z2_driver = {
|
| 466 | .driver = {
|
| 467 | .name = "apple-z2",
|
| 468 | .pm = pm_sleep_ptr(&apple_z2_pm),
|
| 469 | .of_match_table = apple_z2_of_match,
|
| 470 | .probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
| 471 | },
|
| 472 | .id_table = apple_z2_of_id,
|
| 473 | .probe = apple_z2_probe,
|
| 474 | .remove = apple_z2_shutdown,
|
| 475 | };
|
| 476 |
|
| 477 | module_spi_driver(apple_z2_driver);
|
| 478 |
|
| 479 | MODULE_LICENSE("GPL");
|
| 480 | MODULE_FIRMWARE("apple/dfrmtfw-*.bin");
|
| 481 | MODULE_DESCRIPTION("Apple Z2 touchscreens driver");
|