| 1 | |
| 2 |
|
| 3 | |
| 4 | * Copyright (C) 2018-2024 Linaro Ltd.
|
| 5 |
|
| 6 |
|
| 7 | #include <linux/clk.h>
|
| 8 | #include <linux/device.h>
|
| 9 | #include <linux/interconnect.h>
|
| 10 | #include <linux/pm.h>
|
| 11 | #include <linux/pm_runtime.h>
|
| 12 |
|
| 13 | #include "linux/soc/qcom/qcom_aoss.h"
|
| 14 |
|
| 15 | #include "ipa.h"
|
| 16 | #include "ipa_data.h"
|
| 17 | #include "ipa_endpoint.h"
|
| 18 | #include "ipa_interrupt.h"
|
| 19 | #include "ipa_modem.h"
|
| 20 | #include "ipa_power.h"
|
| 21 |
|
| 22 | |
| 23 | * DOC: IPA Power Management
|
| 24 | *
|
| 25 | * The IPA hardware is enabled when the IPA core clock and all the
|
| 26 | * interconnects (buses) it depends on are enabled. Runtime power
|
| 27 | * management is used to determine whether the core clock and
|
| 28 | * interconnects are enabled, and if not in use to be suspended
|
| 29 | * automatically.
|
| 30 | *
|
| 31 | * The core clock currently runs at a fixed clock rate when enabled,
|
| 32 | * an all interconnects use a fixed average and peak bandwidth.
|
| 33 |
|
| 34 |
|
| 35 | #define IPA_AUTOSUSPEND_DELAY 500
|
| 36 |
|
| 37 | |
| 38 | * struct ipa_power - IPA power management information
|
| 39 | * @dev: IPA device pointer
|
| 40 | * @core: IPA core clock
|
| 41 | * @qmp: QMP handle for AOSS communication
|
| 42 | * @interconnect_count: Number of elements in interconnect[]
|
| 43 | * @interconnect: Interconnect array
|
| 44 |
|
| 45 | struct ipa_power {
|
| 46 | struct device *dev;
|
| 47 | struct clk *core;
|
| 48 | struct qmp *qmp;
|
| 49 | u32 interconnect_count;
|
| 50 | struct icc_bulk_data interconnect[] __counted_by(interconnect_count);
|
| 51 | };
|
| 52 |
|
| 53 |
|
| 54 | static int ipa_interconnect_init(struct ipa_power *power,
|
| 55 | const struct ipa_interconnect_data *data)
|
| 56 | {
|
| 57 | struct icc_bulk_data *interconnect;
|
| 58 | int ret;
|
| 59 | u32 i;
|
| 60 |
|
| 61 |
|
| 62 | interconnect = &power->interconnect[0];
|
| 63 | for (i = 0; i < power->interconnect_count; i++) {
|
| 64 |
|
| 65 | interconnect->name = data->name;
|
| 66 | interconnect->avg_bw = data->average_bandwidth;
|
| 67 | interconnect->peak_bw = data->peak_bandwidth;
|
| 68 | data++;
|
| 69 | interconnect++;
|
| 70 | }
|
| 71 |
|
| 72 | ret = of_icc_bulk_get(power->dev, power->interconnect_count,
|
| 73 | power->interconnect);
|
| 74 | if (ret)
|
| 75 | return ret;
|
| 76 |
|
| 77 |
|
| 78 | icc_bulk_disable(power->interconnect_count, power->interconnect);
|
| 79 |
|
| 80 |
|
| 81 | ret = icc_bulk_set_bw(power->interconnect_count, power->interconnect);
|
| 82 | if (ret)
|
| 83 | icc_bulk_put(power->interconnect_count, power->interconnect);
|
| 84 |
|
| 85 | return ret;
|
| 86 | }
|
| 87 |
|
| 88 |
|
| 89 | static void ipa_interconnect_exit(struct ipa_power *power)
|
| 90 | {
|
| 91 | icc_bulk_put(power->interconnect_count, power->interconnect);
|
| 92 | }
|
| 93 |
|
| 94 |
|
| 95 | static int ipa_power_enable(struct ipa *ipa)
|
| 96 | {
|
| 97 | struct ipa_power *power = ipa->power;
|
| 98 | int ret;
|
| 99 |
|
| 100 | ret = icc_bulk_enable(power->interconnect_count, power->interconnect);
|
| 101 | if (ret)
|
| 102 | return ret;
|
| 103 |
|
| 104 | ret = clk_prepare_enable(power->core);
|
| 105 | if (ret) {
|
| 106 | dev_err(power->dev, "error %d enabling core clock\n", ret);
|
| 107 | icc_bulk_disable(power->interconnect_count,
|
| 108 | power->interconnect);
|
| 109 | }
|
| 110 |
|
| 111 | return ret;
|
| 112 | }
|
| 113 |
|
| 114 |
|
| 115 | static void ipa_power_disable(struct ipa *ipa)
|
| 116 | {
|
| 117 | struct ipa_power *power = ipa->power;
|
| 118 |
|
| 119 | clk_disable_unprepare(power->core);
|
| 120 |
|
| 121 | icc_bulk_disable(power->interconnect_count, power->interconnect);
|
| 122 | }
|
| 123 |
|
| 124 | static int ipa_runtime_suspend(struct device *dev)
|
| 125 | {
|
| 126 | struct ipa *ipa = dev_get_drvdata(dev);
|
| 127 |
|
| 128 |
|
| 129 | if (ipa->setup_complete) {
|
| 130 | ipa_endpoint_suspend(ipa);
|
| 131 | gsi_suspend(&ipa->gsi);
|
| 132 | }
|
| 133 |
|
| 134 | ipa_power_disable(ipa);
|
| 135 |
|
| 136 | return 0;
|
| 137 | }
|
| 138 |
|
| 139 | static int ipa_runtime_resume(struct device *dev)
|
| 140 | {
|
| 141 | struct ipa *ipa = dev_get_drvdata(dev);
|
| 142 | int ret;
|
| 143 |
|
| 144 | ret = ipa_power_enable(ipa);
|
| 145 | if (WARN_ON(ret < 0))
|
| 146 | return ret;
|
| 147 |
|
| 148 |
|
| 149 | if (ipa->setup_complete) {
|
| 150 | gsi_resume(&ipa->gsi);
|
| 151 | ipa_endpoint_resume(ipa);
|
| 152 | }
|
| 153 |
|
| 154 | return 0;
|
| 155 | }
|
| 156 |
|
| 157 | static int ipa_suspend(struct device *dev)
|
| 158 | {
|
| 159 | struct ipa *ipa = dev_get_drvdata(dev);
|
| 160 |
|
| 161 | |
| 162 | * be re-enabled until the matching _enable call in
|
| 163 | * ipa_resume(). We do this to ensure that the interrupt
|
| 164 | * handler won't run whilst PM runtime is disabled.
|
| 165 | *
|
| 166 | * Note that disabling the IRQ is NOT the same as disabling
|
| 167 | * irq wake. If wakeup is enabled for the IPA then the IRQ
|
| 168 | * will still cause the system to wake up, see irq_set_irq_wake().
|
| 169 |
|
| 170 | ipa_interrupt_irq_disable(ipa);
|
| 171 |
|
| 172 | return pm_runtime_force_suspend(dev);
|
| 173 | }
|
| 174 |
|
| 175 | static int ipa_resume(struct device *dev)
|
| 176 | {
|
| 177 | struct ipa *ipa = dev_get_drvdata(dev);
|
| 178 | int ret;
|
| 179 |
|
| 180 | ret = pm_runtime_force_resume(dev);
|
| 181 |
|
| 182 | |
| 183 | * to turn the IRQ back on and process any data
|
| 184 | * that was received during suspend.
|
| 185 |
|
| 186 | ipa_interrupt_irq_enable(ipa);
|
| 187 |
|
| 188 | return ret;
|
| 189 | }
|
| 190 |
|
| 191 |
|
| 192 | u32 ipa_core_clock_rate(struct ipa *ipa)
|
| 193 | {
|
| 194 | return ipa->power ? (u32)clk_get_rate(ipa->power->core) : 0;
|
| 195 | }
|
| 196 |
|
| 197 | static int ipa_power_retention_init(struct ipa_power *power)
|
| 198 | {
|
| 199 | struct qmp *qmp = qmp_get(power->dev);
|
| 200 |
|
| 201 | if (IS_ERR(qmp)) {
|
| 202 | if (PTR_ERR(qmp) == -EPROBE_DEFER)
|
| 203 | return -EPROBE_DEFER;
|
| 204 |
|
| 205 |
|
| 206 | qmp = NULL;
|
| 207 | }
|
| 208 | power->qmp = qmp;
|
| 209 |
|
| 210 | return 0;
|
| 211 | }
|
| 212 |
|
| 213 | static void ipa_power_retention_exit(struct ipa_power *power)
|
| 214 | {
|
| 215 | qmp_put(power->qmp);
|
| 216 | power->qmp = NULL;
|
| 217 | }
|
| 218 |
|
| 219 |
|
| 220 | void ipa_power_retention(struct ipa *ipa, bool enable)
|
| 221 | {
|
| 222 | static const char fmt[] = "{ class: bcm, res: ipa_pc, val: %c }";
|
| 223 | struct ipa_power *power = ipa->power;
|
| 224 | int ret;
|
| 225 |
|
| 226 | if (!power->qmp)
|
| 227 | return;
|
| 228 |
|
| 229 | ret = qmp_send(power->qmp, fmt, enable ? '1' : '0');
|
| 230 | if (ret)
|
| 231 | dev_err(power->dev, "error %d sending QMP %sable request\n",
|
| 232 | ret, enable ? "en" : "dis");
|
| 233 | }
|
| 234 |
|
| 235 |
|
| 236 | struct ipa_power *
|
| 237 | ipa_power_init(struct device *dev, const struct ipa_power_data *data)
|
| 238 | {
|
| 239 | struct ipa_power *power;
|
| 240 | struct clk *clk;
|
| 241 | size_t size;
|
| 242 | int ret;
|
| 243 |
|
| 244 | clk = clk_get(dev, "core");
|
| 245 | if (IS_ERR(clk))
|
| 246 | return dev_err_cast_probe(dev, clk, "error getting core clock\n");
|
| 247 |
|
| 248 | ret = clk_set_rate(clk, data->core_clock_rate);
|
| 249 | if (ret) {
|
| 250 | dev_err(dev, "error %d setting core clock rate to %u\n",
|
| 251 | ret, data->core_clock_rate);
|
| 252 | goto err_clk_put;
|
| 253 | }
|
| 254 |
|
| 255 | size = struct_size(power, interconnect, data->interconnect_count);
|
| 256 | power = kzalloc(size, GFP_KERNEL);
|
| 257 | if (!power) {
|
| 258 | ret = -ENOMEM;
|
| 259 | goto err_clk_put;
|
| 260 | }
|
| 261 | power->dev = dev;
|
| 262 | power->core = clk;
|
| 263 | power->interconnect_count = data->interconnect_count;
|
| 264 |
|
| 265 | ret = ipa_interconnect_init(power, data->interconnect_data);
|
| 266 | if (ret)
|
| 267 | goto err_kfree;
|
| 268 |
|
| 269 | ret = ipa_power_retention_init(power);
|
| 270 | if (ret)
|
| 271 | goto err_interconnect_exit;
|
| 272 |
|
| 273 | pm_runtime_set_autosuspend_delay(dev, IPA_AUTOSUSPEND_DELAY);
|
| 274 | pm_runtime_use_autosuspend(dev);
|
| 275 | pm_runtime_enable(dev);
|
| 276 |
|
| 277 | return power;
|
| 278 |
|
| 279 | err_interconnect_exit:
|
| 280 | ipa_interconnect_exit(power);
|
| 281 | err_kfree:
|
| 282 | kfree(power);
|
| 283 | err_clk_put:
|
| 284 | clk_put(clk);
|
| 285 |
|
| 286 | return ERR_PTR(ret);
|
| 287 | }
|
| 288 |
|
| 289 |
|
| 290 | void ipa_power_exit(struct ipa_power *power)
|
| 291 | {
|
| 292 | struct device *dev = power->dev;
|
| 293 | struct clk *clk = power->core;
|
| 294 |
|
| 295 | pm_runtime_disable(dev);
|
| 296 | pm_runtime_dont_use_autosuspend(dev);
|
| 297 | ipa_power_retention_exit(power);
|
| 298 | ipa_interconnect_exit(power);
|
| 299 | kfree(power);
|
| 300 | clk_put(clk);
|
| 301 | }
|
| 302 |
|
| 303 | const struct dev_pm_ops ipa_pm_ops = {
|
| 304 | .suspend = ipa_suspend,
|
| 305 | .resume = ipa_resume,
|
| 306 | .runtime_suspend = ipa_runtime_suspend,
|
| 307 | .runtime_resume = ipa_runtime_resume,
|
| 308 | };
|