| 1 | |
| 2 | #include <linux/err.h>
|
| 3 | #include <linux/module.h>
|
| 4 | #include <linux/reboot.h>
|
| 5 | #include <linux/jiffies.h>
|
| 6 | #include <linux/hwmon.h>
|
| 7 | #include <linux/hwmon-sysfs.h>
|
| 8 |
|
| 9 | #include <loongson.h>
|
| 10 | #include <boot_param.h>
|
| 11 | #include <loongson_hwmon.h>
|
| 12 | #include <loongson_regs.h>
|
| 13 |
|
| 14 | static int csr_temp_enable;
|
| 15 |
|
| 16 | |
| 17 | * Loongson-3 series cpu has two sensors inside,
|
| 18 | * each of them from 0 to 255,
|
| 19 | * if more than 127, that is dangerous.
|
| 20 | * here only provide sensor1 data, because it always hot than sensor0
|
| 21 |
|
| 22 | int loongson3_cpu_temp(int cpu)
|
| 23 | {
|
| 24 | u32 reg, prid_rev;
|
| 25 |
|
| 26 | if (csr_temp_enable) {
|
| 27 | reg = (csr_readl(LOONGSON_CSR_CPUTEMP) & 0xff);
|
| 28 | goto out;
|
| 29 | }
|
| 30 |
|
| 31 | reg = LOONGSON_CHIPTEMP(cpu);
|
| 32 | prid_rev = read_c0_prid() & PRID_REV_MASK;
|
| 33 |
|
| 34 | switch (prid_rev) {
|
| 35 | case PRID_REV_LOONGSON3A_R1:
|
| 36 | reg = (reg >> 8) & 0xff;
|
| 37 | break;
|
| 38 | case PRID_REV_LOONGSON3B_R1:
|
| 39 | case PRID_REV_LOONGSON3B_R2:
|
| 40 | case PRID_REV_LOONGSON3A_R2_0:
|
| 41 | case PRID_REV_LOONGSON3A_R2_1:
|
| 42 | reg = ((reg >> 8) & 0xff) - 100;
|
| 43 | break;
|
| 44 | case PRID_REV_LOONGSON3A_R3_0:
|
| 45 | case PRID_REV_LOONGSON3A_R3_1:
|
| 46 | default:
|
| 47 | reg = (reg & 0xffff) * 731 / 0x4000 - 273;
|
| 48 | break;
|
| 49 | }
|
| 50 |
|
| 51 | out:
|
| 52 | return (int)reg * 1000;
|
| 53 | }
|
| 54 |
|
| 55 | static int nr_packages;
|
| 56 | static struct device *cpu_hwmon_dev;
|
| 57 |
|
| 58 | static ssize_t cpu_temp_label(struct device *dev,
|
| 59 | struct device_attribute *attr, char *buf)
|
| 60 | {
|
| 61 | int id = (to_sensor_dev_attr(attr))->index - 1;
|
| 62 |
|
| 63 | return sprintf(buf, "CPU %d Temperature\n", id);
|
| 64 | }
|
| 65 |
|
| 66 | static ssize_t get_cpu_temp(struct device *dev,
|
| 67 | struct device_attribute *attr, char *buf)
|
| 68 | {
|
| 69 | int id = (to_sensor_dev_attr(attr))->index - 1;
|
| 70 | int value = loongson3_cpu_temp(id);
|
| 71 |
|
| 72 | return sprintf(buf, "%d\n", value);
|
| 73 | }
|
| 74 |
|
| 75 | static SENSOR_DEVICE_ATTR(temp1_input, 0444, get_cpu_temp, NULL, 1);
|
| 76 | static SENSOR_DEVICE_ATTR(temp1_label, 0444, cpu_temp_label, NULL, 1);
|
| 77 | static SENSOR_DEVICE_ATTR(temp2_input, 0444, get_cpu_temp, NULL, 2);
|
| 78 | static SENSOR_DEVICE_ATTR(temp2_label, 0444, cpu_temp_label, NULL, 2);
|
| 79 | static SENSOR_DEVICE_ATTR(temp3_input, 0444, get_cpu_temp, NULL, 3);
|
| 80 | static SENSOR_DEVICE_ATTR(temp3_label, 0444, cpu_temp_label, NULL, 3);
|
| 81 | static SENSOR_DEVICE_ATTR(temp4_input, 0444, get_cpu_temp, NULL, 4);
|
| 82 | static SENSOR_DEVICE_ATTR(temp4_label, 0444, cpu_temp_label, NULL, 4);
|
| 83 |
|
| 84 | static struct attribute *cpu_hwmon_attributes[] = {
|
| 85 | &sensor_dev_attr_temp1_input.dev_attr.attr,
|
| 86 | &sensor_dev_attr_temp1_label.dev_attr.attr,
|
| 87 | &sensor_dev_attr_temp2_input.dev_attr.attr,
|
| 88 | &sensor_dev_attr_temp2_label.dev_attr.attr,
|
| 89 | &sensor_dev_attr_temp3_input.dev_attr.attr,
|
| 90 | &sensor_dev_attr_temp3_label.dev_attr.attr,
|
| 91 | &sensor_dev_attr_temp4_input.dev_attr.attr,
|
| 92 | &sensor_dev_attr_temp4_label.dev_attr.attr,
|
| 93 | NULL
|
| 94 | };
|
| 95 |
|
| 96 | static umode_t cpu_hwmon_is_visible(struct kobject *kobj,
|
| 97 | struct attribute *attr, int i)
|
| 98 | {
|
| 99 | int id = i / 2;
|
| 100 |
|
| 101 | if (id < nr_packages)
|
| 102 | return attr->mode;
|
| 103 | return 0;
|
| 104 | }
|
| 105 |
|
| 106 | static struct attribute_group cpu_hwmon_group = {
|
| 107 | .attrs = cpu_hwmon_attributes,
|
| 108 | .is_visible = cpu_hwmon_is_visible,
|
| 109 | };
|
| 110 |
|
| 111 | static const struct attribute_group *cpu_hwmon_groups[] = {
|
| 112 | &cpu_hwmon_group,
|
| 113 | NULL
|
| 114 | };
|
| 115 |
|
| 116 | #define CPU_THERMAL_THRESHOLD 90000
|
| 117 | static struct delayed_work thermal_work;
|
| 118 |
|
| 119 | static void do_thermal_timer(struct work_struct *work)
|
| 120 | {
|
| 121 | int i, value;
|
| 122 |
|
| 123 | for (i = 0; i < nr_packages; i++) {
|
| 124 | value = loongson3_cpu_temp(i);
|
| 125 | if (value > CPU_THERMAL_THRESHOLD) {
|
| 126 | pr_emerg("Power off due to high temp: %d\n", value);
|
| 127 | orderly_poweroff(true);
|
| 128 | }
|
| 129 | }
|
| 130 |
|
| 131 | schedule_delayed_work(&thermal_work, msecs_to_jiffies(5000));
|
| 132 | }
|
| 133 |
|
| 134 | static int __init loongson_hwmon_init(void)
|
| 135 | {
|
| 136 | pr_info("Loongson Hwmon Enter...\n");
|
| 137 |
|
| 138 | if (cpu_has_csr())
|
| 139 | csr_temp_enable = csr_readl(LOONGSON_CSR_FEATURES) &
|
| 140 | LOONGSON_CSRF_TEMP;
|
| 141 |
|
| 142 | if (!csr_temp_enable && !loongson_chiptemp[0])
|
| 143 | return -ENODEV;
|
| 144 |
|
| 145 | nr_packages = loongson_sysconf.nr_cpus /
|
| 146 | loongson_sysconf.cores_per_package;
|
| 147 |
|
| 148 | cpu_hwmon_dev = hwmon_device_register_with_groups(NULL, "cpu_hwmon",
|
| 149 | NULL, cpu_hwmon_groups);
|
| 150 | if (IS_ERR(cpu_hwmon_dev)) {
|
| 151 | pr_err("hwmon_device_register fail!\n");
|
| 152 | return PTR_ERR(cpu_hwmon_dev);
|
| 153 | }
|
| 154 |
|
| 155 | INIT_DEFERRABLE_WORK(&thermal_work, do_thermal_timer);
|
| 156 | schedule_delayed_work(&thermal_work, msecs_to_jiffies(20000));
|
| 157 |
|
| 158 | return 0;
|
| 159 | }
|
| 160 |
|
| 161 | static void __exit loongson_hwmon_exit(void)
|
| 162 | {
|
| 163 | cancel_delayed_work_sync(&thermal_work);
|
| 164 | hwmon_device_unregister(cpu_hwmon_dev);
|
| 165 | }
|
| 166 |
|
| 167 | module_init(loongson_hwmon_init);
|
| 168 | module_exit(loongson_hwmon_exit);
|
| 169 |
|
| 170 | MODULE_AUTHOR("Yu Xiang <[email protected]>");
|
| 171 | MODULE_AUTHOR("Huacai Chen <[email protected]>");
|
| 172 | MODULE_DESCRIPTION("Loongson CPU Hwmon driver");
|
| 173 | MODULE_LICENSE("GPL");
|