projects/linux·blob master · refs

1205 lines · 37.2 KiB

1# SPDX-License-Identifier: GPL-2.0-only
2menuconfig POWER_SUPPLY
3 bool "Power supply class support"
4 help
5 Say Y here to enable power supply class support. This allows
6 power supply (batteries, AC, USB) monitoring by userspace
7 via sysfs and uevent (if available) and/or APM kernel interface
8 (if selected below).
9
10if POWER_SUPPLY
11
12config POWER_SUPPLY_DEBUG
13 bool "Power supply debug"
14 help
15 Say Y here to enable debugging messages for power supply class
16 and drivers.
17
18config POWER_SUPPLY_HWMON
19 bool
20 prompt "Expose power supply sensors as hwmon device"
21 depends on HWMON=y || HWMON=POWER_SUPPLY
22 default y
23 help
24 This options enables API that allows sensors found on a
25 power supply device (current, voltage, temperature) to be
26 exposed as a hwmon device.
27
28 Say 'Y' here if you want power supplies to
29 have hwmon sysfs interface too.
30
31config APM_POWER
32 tristate "APM emulation for class batteries"
33 depends on APM_EMULATION
34 help
35 Say Y here to enable support APM status emulation using
36 battery class devices.
37
38config ADC_BATTERY_HELPER
39 tristate
40
41config GENERIC_ADC_BATTERY
42 tristate "Generic battery support using IIO"
43 depends on IIO
44 help
45 Say Y here to enable support for the generic battery driver
46 which uses IIO framework to read adc.
47
48config IP5XXX_POWER
49 tristate "Injoinic IP5xxx power bank IC driver"
50 depends on I2C
51 select REGMAP_I2C
52 help
53 Say Y to include support for Injoinic IP5xxx power bank ICs,
54 which include a battery charger and a boost converter.
55
56config MAX8925_POWER
57 tristate "MAX8925 battery charger support"
58 depends on MFD_MAX8925
59 help
60 Say Y here to enable support for the battery charger in the Maxim
61 MAX8925 PMIC.
62
63config WM831X_BACKUP
64 tristate "WM831X backup battery charger support"
65 depends on MFD_WM831X
66 help
67 Say Y here to enable support for the backup battery charger
68 in the Wolfson Microelectronics WM831x PMICs.
69
70config WM831X_POWER
71 tristate "WM831X PMU support"
72 depends on MFD_WM831X
73 help
74 Say Y here to enable support for the power management unit
75 provided by Wolfson Microelectronics WM831x PMICs.
76
77config WM8350_POWER
78 tristate "WM8350 PMU support"
79 depends on MFD_WM8350
80 help
81 Say Y here to enable support for the power management unit
82 provided by the Wolfson Microelectronics WM8350 PMIC.
83
84config TEST_POWER
85 tristate "Test power driver"
86 help
87 This driver is used for testing. It's safe to say M here.
88
89config BATTERY_88PM860X
90 tristate "Marvell 88PM860x battery driver"
91 depends on MFD_88PM860X
92 help
93 Say Y here to enable battery monitor for Marvell 88PM860x chip.
94
95config CHARGER_ADP5061
96 tristate "ADP5061 battery charger driver"
97 depends on I2C
98 select REGMAP_I2C
99 help
100 Say Y here to enable support for the ADP5061 standalone battery
101 charger.
102
103 This driver can be built as a module. If so, the module will be
104 called adp5061.
105
106config BATTERY_ACT8945A
107 tristate "Active-semi ACT8945A charger driver"
108 depends on MFD_ACT8945A || COMPILE_TEST
109 help
110 Say Y here to enable support for power supply provided by
111 Active-semi ActivePath ACT8945A charger.
112
113config BATTERY_CHAGALL
114 tristate "Pegatron Chagall battery driver"
115 depends on I2C
116 depends on LEDS_CLASS
117 help
118 Say Y to include support for Cypress CG7153AM IC based battery
119 fuel gauge with custom firmware found in Pegatron Chagall based
120 tablet line.
121
122 This driver can also be built as a module. If so, the module will be
123 called chagall-battery.
124
125config BATTERY_CPCAP
126 tristate "Motorola CPCAP PMIC battery driver"
127 depends on MFD_CPCAP && IIO
128 default MFD_CPCAP
129 help
130 Say Y here to enable support for battery on Motorola
131 phones and tablets such as droid 4.
132
133config BATTERY_CW2015
134 tristate "CW2015 Battery driver"
135 depends on I2C
136 select REGMAP_I2C
137 help
138 Say Y here to enable support for the cellwise cw2015
139 battery fuel gauge (used in the Pinebook Pro & others)
140
141 This driver can also be built as a module. If so, the module will be
142 called cw2015_battery.
143
144config BATTERY_DS2760
145 tristate "DS2760 battery driver (HP iPAQ & others)"
146 depends on W1
147 help
148 Say Y here to enable support for batteries with ds2760 chip.
149
150config BATTERY_DS2780
151 tristate "DS2780 battery driver"
152 depends on HAS_IOMEM
153 select W1
154 select W1_SLAVE_DS2780
155 help
156 Say Y here to enable support for batteries with ds2780 chip.
157
158config BATTERY_DS2781
159 tristate "DS2781 battery driver"
160 depends on HAS_IOMEM
161 select W1
162 select W1_SLAVE_DS2781
163 help
164 If you enable this you will have the DS2781 battery driver support.
165
166 The battery monitor chip is used in many batteries/devices
167 as the one who is responsible for charging/discharging/monitoring
168 Li+ batteries.
169
170 If you are unsure, say N.
171
172config BATTERY_DS2782
173 tristate "DS2782/DS2786 standalone gas-gauge"
174 depends on I2C
175 help
176 Say Y here to enable support for the DS2782/DS2786 standalone battery
177 gas-gauge.
178
179config BATTERY_HUAWEI_GAOKUN
180 tristate "Huawei Matebook E Go power supply"
181 depends on EC_HUAWEI_GAOKUN
182 help
183 This driver enables battery and adapter support on the Huawei Matebook
184 E Go, which is a sc8280xp-based 2-in-1 tablet.
185
186 To compile the driver as a module, choose M here: the module will be
187 called huawei-gaokun-battery.
188
189config BATTERY_LEGO_EV3
190 tristate "LEGO MINDSTORMS EV3 battery"
191 depends on OF && IIO && GPIOLIB && (ARCH_DAVINCI_DA850 || COMPILE_TEST)
192 help
193 Say Y here to enable support for the LEGO MINDSTORMS EV3 battery.
194
195config BATTERY_LENOVO_YOGA_C630
196 tristate "Lenovo Yoga C630 battery"
197 depends on EC_LENOVO_YOGA_C630
198 help
199 This driver enables battery support on the Lenovo Yoga C630 laptop.
200
201 To compile the driver as a module, choose M here: the module will be
202 called lenovo_yoga_c630_battery.
203
204config BATTERY_PMU
205 tristate "Apple PMU battery"
206 depends on PPC32 && ADB_PMU
207 help
208 Say Y here to expose battery information on Apple machines
209 through the generic battery class.
210
211config BATTERY_QCOM_BATTMGR
212 tristate "Qualcomm PMIC GLINK battery manager support"
213 depends on QCOM_PMIC_GLINK
214 select AUXILIARY_BUS
215 help
216 Say Y here to enable the Qualcomm PMIC GLINK power supply driver,
217 which is used on modern Qualcomm platforms to provide battery and
218 power supply information.
219
220config BATTERY_OLPC
221 tristate "One Laptop Per Child battery"
222 depends on OLPC_EC
223 help
224 Say Y to enable support for the battery on the OLPC laptop.
225
226config BATTERY_SAMSUNG_SDI
227 bool "Samsung SDI batteries"
228 help
229 Say Y to enable support for Samsung SDI battery data.
230 These batteries are used in Samsung mobile phones.
231
232config BATTERY_S2MU005
233 tristate "Samsung S2MU005 PMIC fuel gauge driver"
234 depends on I2C
235 select REGMAP_I2C
236 help
237 Say Y to enable support for the Samsung S2MU005 PMIC integrated
238 fuel gauge, which works indepenently of the PMIC battery charger
239 counterpart, and reports battery metrics.
240
241 This driver, if built as a module, will be called s2mu005-fuel-gauge.
242
243config BATTERY_COLLIE
244 tristate "Sharp SL-5500 (collie) battery"
245 depends on SA1100_COLLIE && MCP_UCB1200
246 help
247 Say Y to enable support for the battery on the Sharp Zaurus
248 SL-5500 (collie) models.
249
250config BATTERY_INGENIC
251 tristate "Ingenic JZ47xx SoCs battery driver"
252 depends on MIPS || COMPILE_TEST
253 depends on INGENIC_ADC
254 help
255 Choose this option if you want to monitor battery status on
256 Ingenic JZ47xx SoC based devices.
257
258 This driver can also be built as a module. If so, the module will be
259 called ingenic-battery.
260
261config BATTERY_INTEL_DC_TI
262 tristate "Intel Bay / Cherry Trail Dollar Cove TI battery driver"
263 depends on INTEL_SOC_PMIC_CHTDC_TI && INTEL_DC_TI_ADC && IIO && ACPI
264 select ADC_BATTERY_HELPER
265 help
266 Choose this option if you want to monitor battery status on Intel
267 Bay Trail / Cherry Trail tablets using the Dollar Cove TI PMIC's
268 coulomb-counter as fuel-gauge.
269
270 To compile this driver as a module, choose M here: the module will be
271 called intel_dc_ti_battery.
272
273config BATTERY_IPAQ_MICRO
274 tristate "iPAQ Atmel Micro ASIC battery driver"
275 depends on MFD_IPAQ_MICRO
276 help
277 Choose this option if you want to monitor battery status on
278 Compaq/HP iPAQ h3100 and h3600.
279
280config BATTERY_WM97XX
281 bool "WM97xx generic battery driver"
282 depends on TOUCHSCREEN_WM97XX=y
283 help
284 Say Y to enable support for battery measured by WM97xx aux port.
285
286config BATTERY_SBS
287 tristate "SBS Compliant gas gauge"
288 depends on I2C
289 help
290 Say Y to include support for SBS battery driver for SBS-compliant
291 gas gauges.
292
293config CHARGER_SBS
294 tristate "SBS Compliant charger"
295 depends on I2C
296 select REGMAP_I2C
297 help
298 Say Y to include support for SBS compliant battery chargers.
299
300config MANAGER_SBS
301 tristate "Smart Battery System Manager"
302 depends on I2C && I2C_MUX && GPIOLIB
303 select I2C_SMBUS
304 help
305 Say Y here to include support for Smart Battery System Manager
306 ICs. The driver reports online and charging status via sysfs.
307 It presents itself also as I2C mux which allows to bind
308 smart battery driver to its ports.
309 Supported is for example LTC1760.
310
311 This driver can also be built as a module. If so, the module will be
312 called sbs-manager.
313
314config BATTERY_BQ27XXX
315 tristate "BQ27xxx battery driver"
316 help
317 Say Y here to enable support for batteries with BQ27xxx chips.
318
319config BATTERY_BQ27XXX_I2C
320 tristate "BQ27xxx I2C support"
321 depends on BATTERY_BQ27XXX
322 depends on I2C
323 default y
324 help
325 Say Y here to enable support for batteries with BQ27xxx chips
326 connected over an I2C bus.
327
328config BATTERY_BQ27XXX_HDQ
329 tristate "BQ27xxx HDQ support"
330 depends on BATTERY_BQ27XXX
331 depends on W1
332 default y
333 help
334 Say Y here to enable support for batteries with BQ27xxx chips
335 connected over an HDQ bus.
336
337config BATTERY_BQ27XXX_DT_UPDATES_NVM
338 bool "BQ27xxx support for update of NVM/flash data memory"
339 depends on BATTERY_BQ27XXX_I2C
340 help
341 Say Y here to enable devicetree monitored-battery config to update
342 NVM/flash data memory. Only enable this option for devices with a
343 fuel gauge mounted on the circuit board, and a battery that cannot
344 easily be replaced with one of a different type. Not for
345 general-purpose kernels, as this can cause misconfiguration of a
346 smart battery with embedded NVM/flash.
347
348config BATTERY_DA9030
349 tristate "DA9030 battery driver"
350 depends on PMIC_DA903X
351 help
352 Say Y here to enable support for batteries charger integrated into
353 DA9030 PMIC.
354
355config BATTERY_DA9052
356 tristate "Dialog DA9052 Battery"
357 depends on PMIC_DA9052
358 help
359 Say Y here to enable support for batteries charger integrated into
360 DA9052 PMIC.
361
362config CHARGER_DA9150
363 tristate "Dialog Semiconductor DA9150 Charger support"
364 depends on MFD_DA9150
365 depends on DA9150_GPADC
366 depends on IIO
367 help
368 Say Y here to enable support for charger unit of the DA9150
369 Integrated Charger & Fuel-Gauge IC.
370
371 This driver can also be built as a module. If so, the module will be
372 called da9150-charger.
373
374config BATTERY_DA9150
375 tristate "Dialog Semiconductor DA9150 Fuel Gauge support"
376 depends on MFD_DA9150
377 help
378 Say Y here to enable support for the Fuel-Gauge unit of the DA9150
379 Integrated Charger & Fuel-Gauge IC
380
381 This driver can also be built as a module. If so, the module will be
382 called da9150-fg.
383
384config CHARGER_AXP20X
385 tristate "X-Powers AXP20X and AXP22X AC power supply driver"
386 depends on MFD_AXP20X
387 depends on AXP20X_ADC
388 depends on IIO
389 help
390 Say Y here to enable support for X-Powers AXP20X and AXP22X PMICs' AC
391 power supply.
392
393 This driver can also be built as a module. If so, the module will be
394 called axp20x_ac_power.
395
396config BATTERY_AXP20X
397 tristate "X-Powers AXP20X battery driver"
398 depends on MFD_AXP20X
399 depends on AXP20X_ADC
400 depends on IIO
401 help
402 Say Y here to enable support for X-Powers AXP20X PMICs' battery power
403 supply.
404
405 This driver can also be built as a module. If so, the module will be
406 called axp20x_battery.
407
408config AXP20X_POWER
409 tristate "AXP20x power supply driver"
410 depends on MFD_AXP20X
411 depends on IIO
412 help
413 This driver provides support for the power supply features of
414 AXP20x PMIC.
415
416config AXP288_CHARGER
417 tristate "X-Powers AXP288 Charger"
418 depends on MFD_AXP20X && EXTCON_AXP288 && IOSF_MBI && ACPI
419 help
420 Say yes here to have support X-Power AXP288 power management IC (PMIC)
421 integrated charger.
422
423config AXP288_FUEL_GAUGE
424 tristate "X-Powers AXP288 Fuel Gauge"
425 depends on MFD_AXP20X && IIO && IOSF_MBI && ACPI
426 help
427 Say yes here to have support for X-Power power management IC (PMIC)
428 Fuel Gauge. The device provides battery statistics and status
429 monitoring as well as alerts for battery over/under voltage and
430 over/under temperature.
431
432config BATTERY_MAX17040
433 tristate "Maxim MAX17040/17041/17043 family Fuel Gauge"
434 depends on I2C && IIO
435 select REGMAP_I2C
436 help
437 Driver supports Maxim fuel-gauge systems for lithium-ion (Li+)
438 batteries used mainly in handheld and portable equipment.
439 Supported devices: max17040, max17041, max17043, max17044, max17048,
440 max17049, max17058, max17059, max77836.
441
442 Driver supports reporting SOC (State of Charge, i.e capacity),
443 voltage and configurable low-SOC wakeup interrupt.
444
445 Driver can be build as a module (max17040_battery).
446
447config BATTERY_MAX17042
448 tristate "Maxim MAX17042/17047/17050/8997/8966 family Fuel Gauge"
449 depends on I2C
450 select REGMAP_I2C
451 help
452 MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
453 in handheld and portable equipment. The MAX17042 is configured
454 to operate with a single lithium cell. MAX8997 and MAX8966 are
455 multi-function devices that include fuel gauages that are compatible
456 with MAX17042.
457 Supported devices: max8966, max8997, max17042, max17047, max17050,
458 max17055, max77693, max77849.
459
460 Driver can be build as a module (max17042_battery).
461
462config BATTERY_MAX1720X
463 tristate "Maxim MAX17201/MAX17205 Fuel Gauge"
464 depends on I2C
465 select REGMAP_I2C
466 help
467 MAX1720x is a family of fuel-gauge systems for lithium-ion (Li+)
468 batteries in handheld and portable equipment. MAX17201 are
469 configured to operate with a single lithium cell, the MAX17205
470 can operate with multiple cells.
471
472 Say Y to include support for the MAX17201/MAX17205 Fuel Gauges.
473
474config BATTERY_MAX1721X
475 tristate "MAX17211/MAX17215 standalone gas-gauge"
476 depends on W1
477 select REGMAP_W1
478 help
479 MAX1721x is fuel-gauge systems for lithium-ion (Li+) batteries
480 in handheld and portable equipment. MAX17211 used with single cell
481 battery. MAX17215 designed for muticell battery. Both them have
482 OneWire (W1) host interface.
483
484 Say Y here to enable support for the MAX17211/MAX17215 standalone
485 battery gas-gauge.
486
487config BATTERY_TWL4030_MADC
488 tristate "TWL4030 MADC battery driver"
489 depends on TWL4030_MADC
490 help
491 Say Y here to enable this dumb driver for batteries managed
492 through the TWL4030 MADC.
493
494config CHARGER_88PM860X
495 tristate "Marvell 88PM860x Charger driver"
496 depends on MFD_88PM860X && BATTERY_88PM860X
497 help
498 Say Y here to enable charger for Marvell 88PM860x chip.
499
500config CHARGER_PF1550
501 tristate "NXP PF1550 battery charger driver"
502 depends on MFD_PF1550
503 help
504 Say Y to enable support for the NXP PF1550 battery charger.
505 The device is a single cell Li-Ion/Li-Polymer battery charger for
506 portable application.
507
508 This driver can also be built as a module. If so, the module will be
509 called pf1550-charger.
510
511config BATTERY_RX51
512 tristate "Nokia RX-51 (N900) battery driver"
513 depends on TWL4030_MADC
514 help
515 Say Y here to enable support for battery information on Nokia
516 RX-51, also known as N900 tablet.
517
518config CHARGER_CPCAP
519 tristate "CPCAP PMIC Charger Driver"
520 depends on MFD_CPCAP && IIO
521 depends on OMAP_USB2 || (!OMAP_USB2 && COMPILE_TEST)
522 default MFD_CPCAP
523 help
524 Say Y to enable support for CPCAP PMIC charger driver for Motorola
525 mobile devices such as Droid 4.
526
527config CHARGER_ISP1704
528 tristate "ISP1704 USB Charger Detection"
529 depends on USB_PHY
530 depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
531 help
532 Say Y to enable support for USB Charger Detection with
533 ISP1707/ISP1704 USB transceivers.
534
535config CHARGER_MAX8903
536 tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
537 help
538 Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
539 The driver supports controlling charger-enable and current-limit
540 pins based on the status of charger connections with interrupt
541 handlers.
542
543config CHARGER_TWL4030
544 tristate "OMAP TWL4030 BCI charger driver"
545 depends on IIO && TWL4030_CORE
546 help
547 Say Y here to enable support for TWL4030 Battery Charge Interface.
548
549config CHARGER_TWL6030
550 tristate "OMAP TWL6030 BCI charger driver"
551 depends on IIO && TWL4030_CORE
552 help
553 Say Y here to enable support for TWL6030/6032 Battery Charge
554 Interface.
555
556 This driver can be build as a module. If so, the module will be
557 called twl6030_charger.
558
559config CHARGER_LP8727
560 tristate "TI/National Semiconductor LP8727 charger driver"
561 depends on I2C
562 help
563 Say Y here to enable support for LP8727 Charger Driver.
564
565config CHARGER_LP8788
566 tristate "TI LP8788 charger driver"
567 depends on MFD_LP8788
568 depends on LP8788_ADC
569 depends on IIO
570 help
571 Say Y to enable support for the LP8788 linear charger.
572
573config CHARGER_GPIO
574 tristate "GPIO charger"
575 depends on GPIOLIB || COMPILE_TEST
576 help
577 Say Y to include support for chargers which report their online status
578 through a GPIO pin.
579
580 This driver can be build as a module. If so, the module will be
581 called gpio-charger.
582
583config CHARGER_MANAGER
584 tristate "Battery charger manager for multiple chargers"
585 depends on REGULATOR
586 select EXTCON
587 help
588 Say Y to enable charger-manager support, which allows multiple
589 chargers attached to a battery and multiple batteries attached to a
590 system. The charger-manager also can monitor charging status in
591 runtime and in suspend-to-RAM by waking up the system periodically
592 with help of suspend_again support.
593
594config CHARGER_LT3651
595 tristate "Analog Devices LT3651 charger"
596 depends on GPIOLIB
597 help
598 Say Y to include support for the Analog Devices (Linear Technology)
599 LT3651 battery charger which reports its status via GPIO lines.
600
601config CHARGER_LTC4162L
602 tristate "LTC4162-L charger"
603 depends on I2C
604 select REGMAP_I2C
605 help
606 Say Y to include support for the Analog Devices (Linear Technology)
607 LTC4162-L battery charger connected to I2C.
608
609config CHARGER_MAX14577
610 tristate "Maxim MAX14577/77836 battery charger driver"
611 depends on MFD_MAX14577
612 help
613 Say Y to enable support for the battery charger control sysfs and
614 platform data of MAX14577/77836 MUICs.
615
616config CHARGER_DETECTOR_MAX14656
617 tristate "Maxim MAX14656 USB charger detector"
618 depends on I2C
619 depends on OF
620 help
621 Say Y to enable support for the Maxim MAX14656 USB charger detector.
622 The device is compliant with the USB Battery Charging Specification
623 Revision 1.2 and can be found e.g. in Kindle 4/5th generation
624 readers and certain LG devices.
625
626config CHARGER_MAX77650
627 tristate "Maxim MAX77650 battery charger driver"
628 depends on MFD_MAX77650
629 help
630 Say Y to enable support for the battery charger control of MAX77650
631 PMICs.
632
633config CHARGER_MAX77693
634 tristate "Maxim MAX77693 battery charger driver"
635 depends on MFD_MAX77693
636 help
637 Say Y to enable support for the Maxim MAX77693 battery charger.
638
639config CHARGER_MAX77705
640 tristate "Maxim MAX77705 battery charger driver"
641 depends on MFD_MAX77705
642 help
643 Say Y to enable support for the Maxim MAX77705 battery charger.
644
645config CHARGER_MAX77759
646 tristate "Maxim MAX77759 battery charger driver"
647 depends on MFD_MAX77759 && REGULATOR
648 default MFD_MAX77759
649 help
650 Say M or Y here to enable the MAX77759 battery charger. MAX77759
651 charger is a function of the MAX77759 PMIC. This is a dual input
652 switch-mode charger. This driver supports buck and OTG boost modes.
653
654 If built as a module, it will be called max77759_charger.
655
656config CHARGER_MAX77976
657 tristate "Maxim MAX77976 battery charger driver"
658 depends on I2C
659 select REGMAP_I2C
660 help
661 The Maxim MAX77976 is a 19 Vin, 5.5A 1-Cell Li+ Battery Charger
662 USB OTG support. It has an I2C interface for configuration.
663
664 Say Y to enable support for the Maxim MAX77976 battery charger.
665 This driver can also be built as a module. If so, the module will be
666 called max77976_charger.
667
668config CHARGER_MAX8971
669 tristate "Maxim MAX8971 battery charger driver"
670 depends on I2C
671 depends on EXTCON || !EXTCON
672 select REGMAP_I2C
673 help
674 The MAX8971 is a compact, high-frequency, high-efficiency switch-mode
675 charger for a one-cell lithium-ion (Li+) battery. It delivers up to
676 1.55A of current to the battery from inputs up to 7.5V and withstands
677 transient inputs up to 22V.
678
679 Say Y to enable support for the Maxim MAX8971 battery charger.
680 This driver can also be built as a module. If so, the module will be
681 called max8971_charger.
682
683config CHARGER_MAX8997
684 tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
685 depends on MFD_MAX8997 && REGULATOR_MAX8997
686 depends on EXTCON || !EXTCON
687 help
688 Say Y to enable support for the battery charger control sysfs and
689 platform data of MAX8997/LP3974 PMICs.
690
691config CHARGER_MAX8998
692 tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
693 depends on MFD_MAX8998 && REGULATOR_MAX8998
694 help
695 Say Y to enable support for the battery charger control sysfs and
696 platform data of MAX8998/LP3974 PMICs.
697
698config CHARGER_MP2629
699 tristate "Monolithic power system MP2629 Battery charger"
700 depends on MFD_MP2629
701 depends on MP2629_ADC
702 depends on IIO
703 help
704 Select this option to enable support for Monolithic power system
705 Battery charger. This driver provides Battery charger power management
706 functions on the systems.
707
708config CHARGER_MT6360
709 tristate "Mediatek MT6360 Charger Driver"
710 depends on MFD_MT6360
711 depends on REGULATOR
712 select LINEAR_RANGES
713 help
714 Say Y here to enable MT6360 Charger Part.
715 The device supports High-Accuracy Voltage/Current Regulation,
716 Average Input Current Regulation, Battery Temperature Sensing,
717 Over-Temperature Protection, DPDM Detection for BC1.2.
718
719config CHARGER_MT6370
720 tristate "MediaTek MT6370 Charger Driver"
721 depends on MFD_MT6370
722 depends on REGULATOR
723 depends on IIO
724 select LINEAR_RANGES
725 help
726 Say Y here to enable MT6370 Charger Part.
727 The device supports High-Accuracy Voltage/Current Regulation,
728 Average Input Current Regulation, Battery Temperature Sensing,
729 Over-Temperature Protection, DPDM Detection for BC1.2.
730
731 This driver can also be built as a module. If so, the module
732 will be called "mt6370-charger".
733
734config CHARGER_QCOM_SMBB
735 tristate "Qualcomm Switch-Mode Battery Charger and Boost"
736 depends on MFD_SPMI_PMIC || COMPILE_TEST
737 depends on OF
738 depends on EXTCON
739 depends on REGULATOR
740 help
741 Say Y to include support for the Switch-Mode Battery Charger and
742 Boost (SMBB) hardware found in Qualcomm PM8941 PMICs. The charger
743 is an integrated, single-cell lithium-ion battery charger. DT
744 configuration is required for loading, see the devicetree
745 documentation for more detail. The base name for this driver is
746 'pm8941_charger'.
747
748config BATTERY_PM8916_BMS_VM
749 tristate "Qualcomm PM8916 BMS-VM support"
750 depends on MFD_SPMI_PMIC || COMPILE_TEST
751 help
752 Say Y to add support for Voltage Mode BMS block found in some
753 Qualcomm PMICs such as PM8916. This hardware block provides
754 battery voltage monitoring for the system.
755
756 To compile this driver as module, choose M here: the
757 module will be called pm8916_bms_vm.
758
759config CHARGER_PM8916_LBC
760 tristate "Qualcomm PM8916 Linear Battery Charger support"
761 depends on MFD_SPMI_PMIC || COMPILE_TEST
762 depends on EXTCON || !EXTCON
763 help
764 Say Y here to add support for Linear Battery Charger block
765 found in some Qualcomm PMICs such as PM8916. This hardware
766 blokc provides simple CC/CV battery charger.
767
768 To compile this driver as module, choose M here: the
769 module will be called pm8916_lbc.
770
771config CHARGER_BQ2415X
772 tristate "TI BQ2415x battery charger driver"
773 depends on I2C
774 help
775 Say Y to enable support for the TI BQ2415x battery charger
776 PMICs.
777
778 You'll need this driver to charge batteries on e.g. Nokia
779 RX-51/N900.
780
781config CHARGER_BQ24190
782 tristate "TI BQ24190 battery charger driver"
783 depends on I2C
784 depends on EXTCON
785 depends on GPIOLIB || COMPILE_TEST
786 help
787 Say Y to enable support for the TI BQ24190 battery charger.
788
789config CHARGER_BQ24257
790 tristate "TI BQ24250/24251/24257 battery charger driver"
791 depends on I2C
792 depends on GPIOLIB || COMPILE_TEST
793 select REGMAP_I2C
794 help
795 Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
796 chargers.
797
798config CHARGER_BQ24735
799 tristate "TI BQ24735 battery charger support"
800 depends on I2C
801 depends on GPIOLIB || COMPILE_TEST
802 help
803 Say Y to enable support for the TI BQ24735 battery charger.
804
805config CHARGER_BQ2515X
806 tristate "TI BQ2515X battery charger family"
807 depends on I2C
808 depends on GPIOLIB || COMPILE_TEST
809 select REGMAP_I2C
810 help
811 Say Y to enable support for the TI BQ2515X family of battery
812 charging integrated circuits. The BQ2515X are highly integrated
813 battery charge management ICs that integrate the most common
814 functions for wearable devices, namely a charger, an output voltage
815 rail, ADC for battery and system monitoring, and push-button
816 controller.
817
818config CHARGER_BQ257XX
819 tristate "TI BQ257XX battery charger family"
820 depends on MFD_BQ257XX
821 help
822 Say Y to enable support for the TI BQ257XX family of battery
823 charging integrated circuits.
824
825config CHARGER_BQ25890
826 tristate "TI BQ25890 battery charger driver"
827 depends on I2C
828 depends on GPIOLIB || COMPILE_TEST
829 select REGMAP_I2C
830 help
831 Say Y to enable support for the TI BQ25890 battery charger.
832
833config CHARGER_BQ25980
834 tristate "TI BQ25980 battery charger driver"
835 depends on I2C
836 depends on GPIOLIB || COMPILE_TEST
837 select REGMAP_I2C
838 help
839 Say Y to enable support for the TI BQ25980, BQ25975 and BQ25960
840 series of fast battery chargers.
841
842config CHARGER_BQ25630
843 tristate "TI BQ25630 battery charger driver"
844 depends on I2C
845 select REGMAP_I2C
846 help
847 Say Y to enable support for the TI BQ25630 battery charger.
848
849config CHARGER_BQ256XX
850 tristate "TI BQ256XX battery charger driver"
851 depends on I2C
852 depends on GPIOLIB || COMPILE_TEST
853 select REGMAP_I2C
854 help
855 Say Y to enable support for the TI BQ256XX battery chargers. The
856 BQ256XX family of devices are highly-integrated, switch-mode battery
857 charge management and system power path management devices for single
858 cell Li-ion and Li-polymer batteries.
859
860config CHARGER_RK817
861 tristate "Rockchip RK817 PMIC Battery Charger"
862 depends on MFD_RK8XX
863 help
864 Say Y to include support for Rockchip RK817 Battery Charger.
865
866config CHARGER_S2M
867 tristate "Samsung S2M series PMIC battery charger support"
868 depends on EXTCON_S2M
869 depends on MFD_SEC_CORE
870 help
871 This option enables support for charger devices found in
872 certain Samsung S2M series PMICs, such as the S2MU005. These
873 devices provide USB power supply information and also required
874 for USB OTG role switching.
875
876config CHARGER_SGM41542
877 tristate "SGM41542 charger driver"
878 depends on I2C
879 depends on GPIOLIB || COMPILE_TEST
880 depends on REGULATOR
881 select REGMAP_I2C
882 help
883 Say Y to enable support for the SGM41542 battery charger.
884
885config CHARGER_SMB347
886 tristate "Summit Microelectronics SMB3XX Battery Charger"
887 depends on I2C
888 depends on REGULATOR
889 select REGMAP_I2C
890 help
891 Say Y to include support for Summit Microelectronics SMB345,
892 SMB347 or SMB358 Battery Charger.
893
894config CHARGER_TPS65090
895 tristate "TPS65090 battery charger driver"
896 depends on MFD_TPS65090
897 help
898 Say Y here to enable support for battery charging with TPS65090
899 PMIC chips.
900
901config CHARGER_TPS65217
902 tristate "TPS65217 battery charger driver"
903 depends on MFD_TPS65217
904 help
905 Say Y here to enable support for battery charging with TPS65217
906 PMIC chips.
907
908config BATTERY_GAUGE_LTC2941
909 tristate "LTC2941/LTC2943 Battery Gauge Driver"
910 depends on I2C
911 help
912 Say Y here to include support for LTC2941 and LTC2943 Battery
913 Gauge IC. The driver reports the charge count continuously, and
914 measures the voltage and temperature every 10 seconds.
915
916config AB8500_BM
917 bool "AB8500 Battery Management Driver"
918 depends on AB8500_CORE && AB8500_GPADC && (IIO = y) && OF
919 select THERMAL
920 select THERMAL_OF
921 help
922 Say Y to include support for AB8500 battery management.
923
924config BATTERY_GOLDFISH
925 tristate "Goldfish battery driver"
926 depends on HAS_IOMEM
927 help
928 Say Y to enable support for the Goldfish battery and AC power
929 driver. Originated in the Android Studio Emulator (goldfish) it is
930 going to be used in other emulators.
931
932config BATTERY_RT5033
933 tristate "RT5033 fuel gauge support"
934 depends on I2C
935 select REGMAP_I2C
936 help
937 This adds support for battery fuel gauge in Richtek RT5033 PMIC.
938 The fuelgauge calculates and determines the battery state of charge
939 according to battery open circuit voltage.
940
941config CHARGER_RT5033
942 tristate "RT5033 battery charger support"
943 depends on MFD_RT5033
944 depends on EXTCON || !EXTCON
945 help
946 This adds support for battery charger in Richtek RT5033 PMIC.
947 The device supports pre-charge mode, fast charge mode and
948 constant voltage mode.
949
950config CHARGER_RT9455
951 tristate "Richtek RT9455 battery charger driver"
952 depends on I2C
953 depends on GPIOLIB || COMPILE_TEST
954 select REGMAP_I2C
955 help
956 Say Y to enable support for Richtek RT9455 battery charger.
957
958config CHARGER_RT9467
959 tristate "Richtek RT9467 Battery Charger Driver"
960 depends on I2C && GPIOLIB && REGULATOR
961 select REGMAP_I2C
962 select REGMAP_IRQ
963 select LINEAR_RANGES
964 help
965 Say Y here to enable RT9467 Battery Charger.
966 RT9467 is a switch-mode single cell Li-Ion/Li-Polymer battery charger
967 for portable applications. It integrates a synchronous PWM controller,
968 power MOSFETs, input current sensing and regulation, high-accuracy
969 voltage regulation, and charge termination. The charge current is
970 regulated through integrated sensing resistors. It also features
971 USB On-The-Go (OTG) support and integrates D+/D- pin for USB
972 host/charging port detection.
973
974 This driver can also be built as a module. If so, the module
975 will be called "rt9467-charger".
976
977config CHARGER_RT9471
978 tristate "Richtek RT9471 battery charger driver"
979 depends on I2C && GPIOLIB && REGULATOR
980 select REGMAP_I2C
981 select REGMAP_IRQ
982 select LINEAR_RANGES
983 help
984 This adds support for Richtek RT9471 battery charger. RT9471 is
985 highly-integrated switch mode battery charger which is system power
986 patch manageable device for single cell Li-Ion and Li-polymer battery.
987 It can support BC12 detection on DPDM, and current and voltage
988 regulation on both charging and boost mode.
989
990 This driver can also be built as a module. If so, the module will be
991 called rt9471.
992
993config CHARGER_RT9756
994 tristate "Richtek RT9756 smart cap divider charger driver"
995 depends on I2C
996 select REGMAP_I2C
997 select LINEAR_RANGES
998 help
999 This adds support for Richtek RT9756 smart cap divider charger driver.
1000 It's a high efficiency and high charge current charger. the device
1001 integrates smart cap divider topology with 9-channel high speed
1002 ADCs that can provide input and output voltage, current and
1003 temperature monitoring.
1004
1005 This driver can also be built as a module. If so, the module will be
1006 called rt9756.
1007
1008config CHARGER_CROS_USBPD
1009 tristate "ChromeOS EC based USBPD charger"
1010 depends on CROS_USBPD_NOTIFY
1011 help
1012 Say Y here to enable ChromeOS EC based USBPD charger
1013 driver. This driver gets various bits of information about
1014 what is connected to USB PD ports from the EC and converts
1015 that into power_supply properties.
1016
1017config CHARGER_CROS_PCHG
1018 tristate "ChromeOS EC based peripheral charger"
1019 depends on MFD_CROS_EC_DEV
1020 default MFD_CROS_EC_DEV
1021 help
1022 Say Y here to enable ChromeOS EC based peripheral charge driver.
1023 This driver gets various information about the devices connected to
1024 the peripheral charge ports from the EC and converts that into
1025 power_supply properties.
1026
1027config CHARGER_CROS_CONTROL
1028 tristate "ChromeOS EC based charge control"
1029 depends on MFD_CROS_EC_DEV
1030 depends on ACPI_BATTERY
1031 default MFD_CROS_EC_DEV
1032 help
1033 Say Y here to enable ChromeOS EC based battery charge control.
1034 This driver can manage charge thresholds and behaviour.
1035
1036 This driver can also be built as a module. If so, the module will be
1037 called cros_charge-control.
1038
1039config CHARGER_SC2731
1040 tristate "Spreadtrum SC2731 charger driver"
1041 depends on MFD_SC27XX_PMIC || COMPILE_TEST
1042 help
1043 Say Y here to enable support for battery charging with SC2731
1044 PMIC chips.
1045
1046config FUEL_GAUGE_SC27XX
1047 tristate "Spreadtrum SC27XX fuel gauge driver"
1048 depends on MFD_SC27XX_PMIC || COMPILE_TEST
1049 depends on IIO
1050 help
1051 Say Y here to enable support for fuel gauge with SC27XX
1052 PMIC chips.
1053
1054config FUEL_GAUGE_STC3117
1055 tristate "STMicroelectronics STC3117 fuel gauge driver"
1056 depends on CRC8
1057 depends on I2C
1058 select REGMAP_I2C
1059 help
1060 Say Y here to enable support for fuel gauge with STC3117
1061 chip.
1062
1063config CHARGER_UCS1002
1064 tristate "Microchip UCS1002 USB Port Power Controller"
1065 depends on I2C
1066 depends on OF
1067 depends on REGULATOR
1068 select REGMAP_I2C
1069 help
1070 Say Y to enable support for Microchip UCS1002 Programmable
1071 USB Port Power Controller with Charger Emulation.
1072
1073config CHARGER_BD71828
1074 tristate "Power-supply driver for ROHM BD71828 and BD71815 PMIC"
1075 depends on MFD_ROHM_BD71828
1076 help
1077 Say Y here to enable support for charger and battery
1078 in ROHM BD71815, BD71817, ROHM BD71828 power management
1079 ICs. This driver gets various bits of information about battery
1080 and charger states.
1081
1082config CHARGER_BD99954
1083 tristate "ROHM bd99954 charger driver"
1084 depends on I2C
1085 select LINEAR_RANGES
1086 help
1087 Say Y here to enable support for getting battery and charger
1088 information and altering charger configurations from the ROHM
1089 BD99954 charger IC.
1090
1091config CHARGER_WILCO
1092 tristate "Wilco EC based charger for ChromeOS"
1093 depends on WILCO_EC
1094 help
1095 Say Y here to enable control of the charging routines performed
1096 by the Embedded Controller on the Chromebook named Wilco. Further
1097 information can be found in
1098 Documentation/ABI/testing/sysfs-class-power-wilco
1099
1100config RN5T618_POWER
1101 tristate "RN5T618 charger/fuel gauge support"
1102 depends on MFD_RN5T618
1103 depends on RN5T618_ADC
1104 depends on IIO
1105 help
1106 Say Y here to have support for RN5T618 PMIC family fuel gauge and charger.
1107 This driver can also be built as a module. If so, the module will be
1108 called rn5t618_power.
1109
1110config BATTERY_ACER_A500
1111 tristate "Acer Iconia Tab A500 battery driver"
1112 depends on MFD_ACER_A500_EC
1113 help
1114 Say Y to include support for Acer Iconia Tab A500 battery fuel gauge.
1115
1116config BATTERY_SURFACE
1117 tristate "Battery driver for 7th-generation Microsoft Surface devices"
1118 depends on SURFACE_AGGREGATOR_REGISTRY
1119 help
1120 Driver for battery devices connected via/managed by the Surface System
1121 Aggregator Module (SSAM).
1122
1123 This driver provides battery-information and -status support for
1124 Surface devices where said data is not exposed via the standard ACPI
1125 devices. On those models (7th-generation), battery-information is
1126 instead handled directly via SSAM client devices and this driver.
1127
1128 Say M or Y here to include battery status support for 7th-generation
1129 Microsoft Surface devices, i.e. Surface Pro 7, Surface Laptop 3,
1130 Surface Book 3, and Surface Laptop Go.
1131
1132config CHARGER_SURFACE
1133 tristate "AC driver for 7th-generation Microsoft Surface devices"
1134 depends on SURFACE_AGGREGATOR_REGISTRY
1135 help
1136 Driver for AC devices connected via/managed by the Surface System
1137 Aggregator Module (SSAM).
1138
1139 This driver provides AC-information and -status support for Surface
1140 devices where said data is not exposed via the standard ACPI devices.
1141 On those models (7th-generation), AC-information is instead handled
1142 directly via a SSAM client device and this driver.
1143
1144 Say M or Y here to include AC status support for 7th-generation
1145 Microsoft Surface devices, i.e. Surface Pro 7, Surface Laptop 3,
1146 Surface Book 3, and Surface Laptop Go.
1147
1148config BATTERY_UG3105
1149 tristate "uPI uG3105 battery monitor driver"
1150 depends on I2C
1151 select ADC_BATTERY_HELPER
1152 help
1153 Battery monitor driver for the uPI uG3105 battery monitor.
1154
1155 Note the uG3105 is not a full-featured autonomous fuel-gauge. Instead
1156 it is expected to be use in combination with some always on
1157 microcontroller reading its coulomb-counter before it can wrap
1158 (it must be read every 400 seconds!).
1159
1160 Since Linux does not monitor coulomb-counter changes while the
1161 device is off or suspended, the functionality of this driver is
1162 limited to reporting capacity only.
1163
1164config BATTERY_CHARGER_SURFACE_RT
1165 tristate "Battery & Charger driver for Microsoft Surface RT"
1166 depends on I2C && GPIOLIB
1167 help
1168 UEFI/APX driver for the 1st-generation Microsoft Surface RT
1169 battery. Driver supports reading battery properties and
1170 charger status.
1171
1172 This driver can also be built as a module. If so, the module
1173 will be called surface-rt-ec.
1174
1175config CHARGER_QCOM_SMB2
1176 tristate "Qualcomm PMI8998 PMIC charger driver"
1177 depends on MFD_SPMI_PMIC
1178 depends on IIO
1179 help
1180 Say Y here to enable the Qualcomm PMIC Charger driver. This
1181 adds support for the SMB2 switch mode battery charger found
1182 in PMI8998 and related PMICs.
1183
1184config FUEL_GAUGE_MM8013
1185 tristate "Mitsumi MM8013 fuel gauge driver"
1186 depends on I2C
1187 select REGMAP_I2C
1188 help
1189 Say Y here to enable the Mitsumi MM8013 fuel gauge driver.
1190 It enables the monitoring of many battery parameters, including
1191 the state of charge, temperature, cycle count, actual and design
1192 capacity, etc.
1193
1194config MACSMC_POWER
1195 tristate "Apple SMC Battery and Power Driver"
1196 depends on MFD_MACSMC
1197 help
1198 This driver provides support for the battery and AC adapter on
1199 Apple Silicon machines. It exposes battery telemetry (voltage,
1200 current, health) and AC adapter status through the standard Linux
1201 power supply framework.
1202
1203 Say Y or M here if you have an Apple Silicon based Mac.
1204
1205endif # POWER_SUPPLY