| 1 | |
| 2 | #include <linux/module.h>
|
| 3 | #include <linux/i2c.h>
|
| 4 | #include <linux/of.h>
|
| 5 | #include <linux/regmap.h>
|
| 6 | #include <linux/regulator/driver.h>
|
| 7 |
|
| 8 | static const struct regulator_ops max8893_ops = {
|
| 9 | .is_enabled = regulator_is_enabled_regmap,
|
| 10 | .enable = regulator_enable_regmap,
|
| 11 | .disable = regulator_disable_regmap,
|
| 12 | .get_voltage_sel = regulator_get_voltage_sel_regmap,
|
| 13 | .set_voltage_sel = regulator_set_voltage_sel_regmap,
|
| 14 | .list_voltage = regulator_list_voltage_linear,
|
| 15 | .map_voltage = regulator_map_voltage_linear,
|
| 16 | };
|
| 17 |
|
| 18 | static const struct regulator_desc max8893_regulators[] = {
|
| 19 | {
|
| 20 | .name = "BUCK",
|
| 21 | .supply_name = "in-buck",
|
| 22 | .of_match = of_match_ptr("buck"),
|
| 23 | .regulators_node = of_match_ptr("regulators"),
|
| 24 | .n_voltages = 0x11,
|
| 25 | .id = 6,
|
| 26 | .ops = &max8893_ops,
|
| 27 | .type = REGULATOR_VOLTAGE,
|
| 28 | .owner = THIS_MODULE,
|
| 29 | .min_uV = 800000,
|
| 30 | .uV_step = 100000,
|
| 31 | .vsel_reg = 0x4,
|
| 32 | .vsel_mask = 0x1f,
|
| 33 | .enable_reg = 0x0,
|
| 34 | .enable_mask = BIT(7),
|
| 35 | },
|
| 36 | {
|
| 37 | .name = "LDO1",
|
| 38 | .supply_name = "in-ldo1",
|
| 39 | .of_match = of_match_ptr("ldo1"),
|
| 40 | .regulators_node = of_match_ptr("regulators"),
|
| 41 | .n_voltages = 0x12,
|
| 42 | .id = 1,
|
| 43 | .ops = &max8893_ops,
|
| 44 | .type = REGULATOR_VOLTAGE,
|
| 45 | .owner = THIS_MODULE,
|
| 46 | .min_uV = 1600000,
|
| 47 | .uV_step = 100000,
|
| 48 | .vsel_reg = 0x5,
|
| 49 | .vsel_mask = 0x1f,
|
| 50 | .enable_reg = 0x0,
|
| 51 | .enable_mask = BIT(5),
|
| 52 | },
|
| 53 | {
|
| 54 | .name = "LDO2",
|
| 55 | .supply_name = "in-ldo2",
|
| 56 | .of_match = of_match_ptr("ldo2"),
|
| 57 | .regulators_node = of_match_ptr("regulators"),
|
| 58 | .n_voltages = 0x16,
|
| 59 | .id = 2,
|
| 60 | .ops = &max8893_ops,
|
| 61 | .type = REGULATOR_VOLTAGE,
|
| 62 | .owner = THIS_MODULE,
|
| 63 | .min_uV = 1200000,
|
| 64 | .uV_step = 100000,
|
| 65 | .vsel_reg = 0x6,
|
| 66 | .vsel_mask = 0x1f,
|
| 67 | .enable_reg = 0x0,
|
| 68 | .enable_mask = BIT(4),
|
| 69 | },
|
| 70 | {
|
| 71 | .name = "LDO3",
|
| 72 | .supply_name = "in-ldo3",
|
| 73 | .of_match = of_match_ptr("ldo3"),
|
| 74 | .regulators_node = of_match_ptr("regulators"),
|
| 75 | .n_voltages = 0x12,
|
| 76 | .id = 3,
|
| 77 | .ops = &max8893_ops,
|
| 78 | .type = REGULATOR_VOLTAGE,
|
| 79 | .owner = THIS_MODULE,
|
| 80 | .min_uV = 1600000,
|
| 81 | .uV_step = 100000,
|
| 82 | .vsel_reg = 0x7,
|
| 83 | .vsel_mask = 0x1f,
|
| 84 | .enable_reg = 0x0,
|
| 85 | .enable_mask = BIT(3),
|
| 86 | },
|
| 87 | {
|
| 88 | .name = "LDO4",
|
| 89 | .supply_name = "in-ldo4",
|
| 90 | .of_match = of_match_ptr("ldo4"),
|
| 91 | .regulators_node = of_match_ptr("regulators"),
|
| 92 | .n_voltages = 0x1a,
|
| 93 | .id = 4,
|
| 94 | .ops = &max8893_ops,
|
| 95 | .type = REGULATOR_VOLTAGE,
|
| 96 | .owner = THIS_MODULE,
|
| 97 | .min_uV = 800000,
|
| 98 | .uV_step = 100000,
|
| 99 | .vsel_reg = 0x8,
|
| 100 | .vsel_mask = 0x1f,
|
| 101 | .enable_reg = 0x0,
|
| 102 | .enable_mask = BIT(2),
|
| 103 | },
|
| 104 | {
|
| 105 | .name = "LDO5",
|
| 106 | .supply_name = "in-ldo5",
|
| 107 | .of_match = of_match_ptr("ldo5"),
|
| 108 | .regulators_node = of_match_ptr("regulators"),
|
| 109 | .n_voltages = 0x1a,
|
| 110 | .id = 5,
|
| 111 | .ops = &max8893_ops,
|
| 112 | .type = REGULATOR_VOLTAGE,
|
| 113 | .owner = THIS_MODULE,
|
| 114 | .min_uV = 800000,
|
| 115 | .uV_step = 100000,
|
| 116 | .vsel_reg = 0x9,
|
| 117 | .vsel_mask = 0x1f,
|
| 118 | .enable_reg = 0x0,
|
| 119 | .enable_mask = BIT(1),
|
| 120 | }
|
| 121 | };
|
| 122 |
|
| 123 | static const struct regmap_config max8893_regmap = {
|
| 124 | .reg_bits = 8,
|
| 125 | .val_bits = 8,
|
| 126 | };
|
| 127 |
|
| 128 | static int max8893_probe(struct i2c_client *i2c)
|
| 129 | {
|
| 130 | int id, ret;
|
| 131 | struct regulator_config config = {.dev = &i2c->dev};
|
| 132 | struct regmap *regmap = devm_regmap_init_i2c(i2c, &max8893_regmap);
|
| 133 |
|
| 134 | if (IS_ERR(regmap)) {
|
| 135 | ret = PTR_ERR(regmap);
|
| 136 | dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
|
| 137 | return ret;
|
| 138 | }
|
| 139 |
|
| 140 | for (id = 0; id < ARRAY_SIZE(max8893_regulators); id++) {
|
| 141 | struct regulator_dev *rdev;
|
| 142 | rdev = devm_regulator_register(&i2c->dev,
|
| 143 | &max8893_regulators[id],
|
| 144 | &config);
|
| 145 | if (IS_ERR(rdev)) {
|
| 146 | ret = PTR_ERR(rdev);
|
| 147 | dev_err(&i2c->dev, "failed to register %s: %d\n",
|
| 148 | max8893_regulators[id].name, ret);
|
| 149 | return ret;
|
| 150 | }
|
| 151 | }
|
| 152 |
|
| 153 | return 0;
|
| 154 | }
|
| 155 |
|
| 156 | #ifdef CONFIG_OF
|
| 157 | static const struct of_device_id max8893_dt_match[] = {
|
| 158 | { .compatible = "maxim,max8893" },
|
| 159 | { },
|
| 160 | };
|
| 161 | MODULE_DEVICE_TABLE(of, max8893_dt_match);
|
| 162 | #endif
|
| 163 |
|
| 164 | static const struct i2c_device_id max8893_ids[] = {
|
| 165 | { .name = "max8893" },
|
| 166 | { }
|
| 167 | };
|
| 168 | MODULE_DEVICE_TABLE(i2c, max8893_ids);
|
| 169 |
|
| 170 | static struct i2c_driver max8893_driver = {
|
| 171 | .probe = max8893_probe,
|
| 172 | .driver = {
|
| 173 | .name = "max8893",
|
| 174 | .probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
| 175 | .of_match_table = of_match_ptr(max8893_dt_match),
|
| 176 | },
|
| 177 | .id_table = max8893_ids,
|
| 178 | };
|
| 179 |
|
| 180 | module_i2c_driver(max8893_driver);
|
| 181 |
|
| 182 | MODULE_DESCRIPTION("Maxim MAX8893 PMIC driver");
|
| 183 | MODULE_AUTHOR("Sergey Larin <[email protected]>");
|
| 184 | MODULE_LICENSE("GPL");
|