| 1 | |
| 2 | |
| 3 | |
| 4 | |
| 5 | |
| 6 | |
| 7 | |
| 8 |
|
| 9 | #include <linux/err.h>
|
| 10 | #include <linux/i2c.h>
|
| 11 | #include <linux/init.h>
|
| 12 | #include <linux/module.h>
|
| 13 | #include <linux/of.h>
|
| 14 | #include <linux/platform_device.h>
|
| 15 | #include <linux/regmap.h>
|
| 16 | #include <linux/regulator/driver.h>
|
| 17 |
|
| 18 | #define MP5416_REG_CTL0 0x00
|
| 19 | #define MP5416_REG_CTL1 0x01
|
| 20 | #define MP5416_REG_CTL2 0x02
|
| 21 | #define MP5416_REG_ILIM 0x03
|
| 22 | #define MP5416_REG_BUCK1 0x04
|
| 23 | #define MP5416_REG_BUCK2 0x05
|
| 24 | #define MP5416_REG_BUCK3 0x06
|
| 25 | #define MP5416_REG_BUCK4 0x07
|
| 26 | #define MP5416_REG_LDO1 0x08
|
| 27 | #define MP5416_REG_LDO2 0x09
|
| 28 | #define MP5416_REG_LDO3 0x0a
|
| 29 | #define MP5416_REG_LDO4 0x0b
|
| 30 |
|
| 31 | #define MP5416_REGULATOR_EN BIT(7)
|
| 32 | #define MP5416_MASK_VSET 0x7f
|
| 33 | #define MP5416_MASK_BUCK1_ILIM 0xc0
|
| 34 | #define MP5416_MASK_BUCK2_ILIM 0x0c
|
| 35 | #define MP5416_MASK_BUCK3_ILIM 0x30
|
| 36 | #define MP5416_MASK_BUCK4_ILIM 0x03
|
| 37 | #define MP5416_MASK_DVS_SLEWRATE 0xc0
|
| 38 |
|
| 39 |
|
| 40 | #define MP5416_VOLT1_MIN 600000
|
| 41 | #define MP5416_VOLT1_MAX 2187500
|
| 42 | #define MP5416_VOLT1_STEP 12500
|
| 43 | #define MP5416_VOLT2_MIN 800000
|
| 44 | #define MP5416_VOLT2_MAX 3975000
|
| 45 | #define MP5416_VOLT2_STEP 25000
|
| 46 |
|
| 47 | #define MP5416_VOLT1_RANGE \
|
| 48 | ((MP5416_VOLT1_MAX - MP5416_VOLT1_MIN)/MP5416_VOLT1_STEP + 1)
|
| 49 | #define MP5416_VOLT2_RANGE \
|
| 50 | ((MP5416_VOLT2_MAX - MP5416_VOLT2_MIN)/MP5416_VOLT2_STEP + 1)
|
| 51 |
|
| 52 | #define MP5416BUCK(_name, _id, _ilim, _dreg, _dval, _vsel) \
|
| 53 | [MP5416_BUCK ## _id] = { \
|
| 54 | .id = MP5416_BUCK ## _id, \
|
| 55 | .name = _name, \
|
| 56 | .of_match = _name, \
|
| 57 | .regulators_node = "regulators", \
|
| 58 | .ops = &mp5416_buck_ops, \
|
| 59 | .min_uV = MP5416_VOLT ##_vsel## _MIN, \
|
| 60 | .uV_step = MP5416_VOLT ##_vsel## _STEP, \
|
| 61 | .n_voltages = MP5416_VOLT ##_vsel## _RANGE, \
|
| 62 | .curr_table = _ilim, \
|
| 63 | .n_current_limits = ARRAY_SIZE(_ilim), \
|
| 64 | .csel_reg = MP5416_REG_ILIM, \
|
| 65 | .csel_mask = MP5416_MASK_BUCK ## _id ##_ILIM, \
|
| 66 | .vsel_reg = MP5416_REG_BUCK ## _id, \
|
| 67 | .vsel_mask = MP5416_MASK_VSET, \
|
| 68 | .enable_reg = MP5416_REG_BUCK ## _id, \
|
| 69 | .enable_mask = MP5416_REGULATOR_EN, \
|
| 70 | .ramp_reg = MP5416_REG_CTL2, \
|
| 71 | .ramp_mask = MP5416_MASK_DVS_SLEWRATE, \
|
| 72 | .ramp_delay_table = mp5416_buck_ramp_table, \
|
| 73 | .n_ramp_values = ARRAY_SIZE(mp5416_buck_ramp_table), \
|
| 74 | .active_discharge_on = _dval, \
|
| 75 | .active_discharge_reg = _dreg, \
|
| 76 | .active_discharge_mask = _dval, \
|
| 77 | .owner = THIS_MODULE, \
|
| 78 | }
|
| 79 |
|
| 80 | #define MP5416LDO(_name, _id, _dval) \
|
| 81 | [MP5416_LDO ## _id] = { \
|
| 82 | .id = MP5416_LDO ## _id, \
|
| 83 | .name = _name, \
|
| 84 | .of_match = _name, \
|
| 85 | .regulators_node = "regulators", \
|
| 86 | .ops = &mp5416_ldo_ops, \
|
| 87 | .min_uV = MP5416_VOLT2_MIN, \
|
| 88 | .uV_step = MP5416_VOLT2_STEP, \
|
| 89 | .n_voltages = MP5416_VOLT2_RANGE, \
|
| 90 | .vsel_reg = MP5416_REG_LDO ##_id, \
|
| 91 | .vsel_mask = MP5416_MASK_VSET, \
|
| 92 | .enable_reg = MP5416_REG_LDO ##_id, \
|
| 93 | .enable_mask = MP5416_REGULATOR_EN, \
|
| 94 | .active_discharge_on = _dval, \
|
| 95 | .active_discharge_reg = MP5416_REG_CTL2, \
|
| 96 | .active_discharge_mask = _dval, \
|
| 97 | .owner = THIS_MODULE, \
|
| 98 | }
|
| 99 |
|
| 100 | enum mp5416_regulators {
|
| 101 | MP5416_BUCK1,
|
| 102 | MP5416_BUCK2,
|
| 103 | MP5416_BUCK3,
|
| 104 | MP5416_BUCK4,
|
| 105 | MP5416_LDO1,
|
| 106 | MP5416_LDO2,
|
| 107 | MP5416_LDO3,
|
| 108 | MP5416_LDO4,
|
| 109 | MP5416_MAX_REGULATORS,
|
| 110 | };
|
| 111 |
|
| 112 | static const struct regmap_config mp5416_regmap_config = {
|
| 113 | .reg_bits = 8,
|
| 114 | .val_bits = 8,
|
| 115 | .max_register = 0x0d,
|
| 116 | };
|
| 117 |
|
| 118 | |
| 119 | * ILIM1 & ILIM3
|
| 120 |
|
| 121 | static const unsigned int mp5416_I_limits1[] = {
|
| 122 | 3800000, 4600000, 5600000, 6800000
|
| 123 | };
|
| 124 |
|
| 125 |
|
| 126 | static const unsigned int mp5416_I_limits2[] = {
|
| 127 | 2200000, 3200000, 4200000, 5200000
|
| 128 | };
|
| 129 |
|
| 130 | |
| 131 | * DVS ramp rate BUCK1 to BUCK4
|
| 132 | * 00: 32mV/us
|
| 133 | * 01: 16mV/us
|
| 134 | * 10: 8mV/us
|
| 135 | * 11: 4mV/us
|
| 136 |
|
| 137 | static const unsigned int mp5416_buck_ramp_table[] = {
|
| 138 | 32000, 16000, 8000, 4000
|
| 139 | };
|
| 140 |
|
| 141 | static const struct regulator_ops mp5416_ldo_ops = {
|
| 142 | .enable = regulator_enable_regmap,
|
| 143 | .disable = regulator_disable_regmap,
|
| 144 | .is_enabled = regulator_is_enabled_regmap,
|
| 145 | .list_voltage = regulator_list_voltage_linear,
|
| 146 | .map_voltage = regulator_map_voltage_linear,
|
| 147 | .get_voltage_sel = regulator_get_voltage_sel_regmap,
|
| 148 | .set_voltage_sel = regulator_set_voltage_sel_regmap,
|
| 149 | .set_active_discharge = regulator_set_active_discharge_regmap,
|
| 150 | };
|
| 151 |
|
| 152 | static const struct regulator_ops mp5416_buck_ops = {
|
| 153 | .enable = regulator_enable_regmap,
|
| 154 | .disable = regulator_disable_regmap,
|
| 155 | .is_enabled = regulator_is_enabled_regmap,
|
| 156 | .list_voltage = regulator_list_voltage_linear,
|
| 157 | .map_voltage = regulator_map_voltage_linear,
|
| 158 | .get_voltage_sel = regulator_get_voltage_sel_regmap,
|
| 159 | .set_voltage_sel = regulator_set_voltage_sel_regmap,
|
| 160 | .set_active_discharge = regulator_set_active_discharge_regmap,
|
| 161 | .get_current_limit = regulator_get_current_limit_regmap,
|
| 162 | .set_current_limit = regulator_set_current_limit_regmap,
|
| 163 | .set_ramp_delay = regulator_set_ramp_delay_regmap,
|
| 164 | };
|
| 165 |
|
| 166 | static const struct regulator_desc mp5416_regulators_desc[MP5416_MAX_REGULATORS] = {
|
| 167 | MP5416BUCK("buck1", 1, mp5416_I_limits1, MP5416_REG_CTL1, BIT(0), 1),
|
| 168 | MP5416BUCK("buck2", 2, mp5416_I_limits2, MP5416_REG_CTL1, BIT(1), 2),
|
| 169 | MP5416BUCK("buck3", 3, mp5416_I_limits1, MP5416_REG_CTL1, BIT(2), 1),
|
| 170 | MP5416BUCK("buck4", 4, mp5416_I_limits2, MP5416_REG_CTL2, BIT(5), 2),
|
| 171 | MP5416LDO("ldo1", 1, BIT(4)),
|
| 172 | MP5416LDO("ldo2", 2, BIT(3)),
|
| 173 | MP5416LDO("ldo3", 3, BIT(2)),
|
| 174 | MP5416LDO("ldo4", 4, BIT(1)),
|
| 175 | };
|
| 176 |
|
| 177 | static const struct regulator_desc mp5496_regulators_desc[MP5416_MAX_REGULATORS] = {
|
| 178 | MP5416BUCK("buck1", 1, mp5416_I_limits1, MP5416_REG_CTL1, BIT(0), 1),
|
| 179 | MP5416BUCK("buck2", 2, mp5416_I_limits2, MP5416_REG_CTL1, BIT(1), 1),
|
| 180 | MP5416BUCK("buck3", 3, mp5416_I_limits1, MP5416_REG_CTL1, BIT(2), 1),
|
| 181 | MP5416BUCK("buck4", 4, mp5416_I_limits2, MP5416_REG_CTL2, BIT(5), 1),
|
| 182 | MP5416LDO("ldo1", 1, BIT(4)),
|
| 183 | MP5416LDO("ldo2", 2, BIT(3)),
|
| 184 | MP5416LDO("ldo3", 3, BIT(2)),
|
| 185 | MP5416LDO("ldo4", 4, BIT(1)),
|
| 186 | };
|
| 187 |
|
| 188 | static int mp5416_i2c_probe(struct i2c_client *client)
|
| 189 | {
|
| 190 | struct device *dev = &client->dev;
|
| 191 | struct regulator_config config = { NULL, };
|
| 192 | static const struct regulator_desc *desc;
|
| 193 | struct regulator_dev *rdev;
|
| 194 | struct regmap *regmap;
|
| 195 | int i;
|
| 196 |
|
| 197 | regmap = devm_regmap_init_i2c(client, &mp5416_regmap_config);
|
| 198 | if (IS_ERR(regmap)) {
|
| 199 | dev_err(dev, "Failed to allocate regmap!\n");
|
| 200 | return PTR_ERR(regmap);
|
| 201 | }
|
| 202 |
|
| 203 | desc = i2c_get_match_data(client);
|
| 204 | if (!desc)
|
| 205 | return -ENODEV;
|
| 206 |
|
| 207 | config.dev = dev;
|
| 208 | config.regmap = regmap;
|
| 209 |
|
| 210 | for (i = 0; i < MP5416_MAX_REGULATORS; i++) {
|
| 211 | rdev = devm_regulator_register(dev,
|
| 212 | &desc[i],
|
| 213 | &config);
|
| 214 | if (IS_ERR(rdev)) {
|
| 215 | dev_err(dev, "Failed to register regulator!\n");
|
| 216 | return PTR_ERR(rdev);
|
| 217 | }
|
| 218 | }
|
| 219 |
|
| 220 | return 0;
|
| 221 | }
|
| 222 |
|
| 223 | static const struct of_device_id mp5416_of_match[] = {
|
| 224 | { .compatible = "mps,mp5416", .data = &mp5416_regulators_desc },
|
| 225 | { .compatible = "mps,mp5496", .data = &mp5496_regulators_desc },
|
| 226 | {}
|
| 227 | };
|
| 228 | MODULE_DEVICE_TABLE(of, mp5416_of_match);
|
| 229 |
|
| 230 | static const struct i2c_device_id mp5416_id[] = {
|
| 231 | { .name = "mp5416", .driver_data = (kernel_ulong_t)&mp5416_regulators_desc },
|
| 232 | { .name = "mp5496", .driver_data = (kernel_ulong_t)&mp5496_regulators_desc },
|
| 233 | { }
|
| 234 | };
|
| 235 | MODULE_DEVICE_TABLE(i2c, mp5416_id);
|
| 236 |
|
| 237 | static struct i2c_driver mp5416_regulator_driver = {
|
| 238 | .driver = {
|
| 239 | .name = "mp5416",
|
| 240 | .probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
| 241 | .of_match_table = of_match_ptr(mp5416_of_match),
|
| 242 | },
|
| 243 | .probe = mp5416_i2c_probe,
|
| 244 | .id_table = mp5416_id,
|
| 245 | };
|
| 246 | module_i2c_driver(mp5416_regulator_driver);
|
| 247 |
|
| 248 | MODULE_AUTHOR("Saravanan Sekar <[email protected]>");
|
| 249 | MODULE_DESCRIPTION("MP5416 PMIC regulator driver");
|
| 250 | MODULE_LICENSE("GPL");
|