| 1 | |
| 2 | |
| 3 | * RTC client/driver for the Maxim/Dallas DS1374 Real-Time Clock over I2C
|
| 4 | *
|
| 5 | * Based on code by Randy Vinson <[email protected]>,
|
| 6 | * which was based on the m41t00.c by Mark Greer <[email protected]>.
|
| 7 | *
|
| 8 | * Copyright (C) 2014 Rose Technology
|
| 9 | * Copyright (C) 2006-2007 Freescale Semiconductor
|
| 10 | * Copyright (c) 2005 MontaVista Software, Inc.
|
| 11 |
|
| 12 | |
| 13 | * It would be more efficient to use i2c msgs/i2c_transfer directly but, as
|
| 14 | * recommended in .../Documentation/i2c/writing-clients.rst section
|
| 15 | * "Sending and receiving", using SMBus level communication is preferred.
|
| 16 |
|
| 17 |
|
| 18 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
| 19 |
|
| 20 | #include <linux/kernel.h>
|
| 21 | #include <linux/module.h>
|
| 22 | #include <linux/interrupt.h>
|
| 23 | #include <linux/i2c.h>
|
| 24 | #include <linux/rtc.h>
|
| 25 | #include <linux/bcd.h>
|
| 26 | #include <linux/workqueue.h>
|
| 27 | #include <linux/slab.h>
|
| 28 | #include <linux/pm.h>
|
| 29 | #ifdef CONFIG_RTC_DRV_DS1374_WDT
|
| 30 | #include <linux/fs.h>
|
| 31 | #include <linux/ioctl.h>
|
| 32 | #include <linux/miscdevice.h>
|
| 33 | #include <linux/reboot.h>
|
| 34 | #include <linux/watchdog.h>
|
| 35 | #endif
|
| 36 |
|
| 37 | #define DS1374_REG_TOD0 0x00
|
| 38 | #define DS1374_REG_TOD1 0x01
|
| 39 | #define DS1374_REG_TOD2 0x02
|
| 40 | #define DS1374_REG_TOD3 0x03
|
| 41 | #define DS1374_REG_WDALM0 0x04
|
| 42 | #define DS1374_REG_WDALM1 0x05
|
| 43 | #define DS1374_REG_WDALM2 0x06
|
| 44 | #define DS1374_REG_CR 0x07
|
| 45 | #define DS1374_REG_CR_AIE 0x01
|
| 46 | #define DS1374_REG_CR_WDSTR 0x08
|
| 47 | #define DS1374_REG_CR_WDALM 0x20
|
| 48 | #define DS1374_REG_CR_WACE 0x40
|
| 49 | #define DS1374_REG_SR 0x08
|
| 50 | #define DS1374_REG_SR_OSF 0x80
|
| 51 | #define DS1374_REG_SR_AF 0x01
|
| 52 | #define DS1374_REG_TCR 0x09
|
| 53 |
|
| 54 | static const struct i2c_device_id ds1374_id[] = {
|
| 55 | { .name = "ds1374" },
|
| 56 | { }
|
| 57 | };
|
| 58 | MODULE_DEVICE_TABLE(i2c, ds1374_id);
|
| 59 |
|
| 60 | #ifdef CONFIG_OF
|
| 61 | static const struct of_device_id ds1374_of_match[] = {
|
| 62 | { .compatible = "dallas,ds1374" },
|
| 63 | { }
|
| 64 | };
|
| 65 | MODULE_DEVICE_TABLE(of, ds1374_of_match);
|
| 66 | #endif
|
| 67 |
|
| 68 | struct ds1374 {
|
| 69 | struct i2c_client *client;
|
| 70 | struct rtc_device *rtc;
|
| 71 | struct work_struct work;
|
| 72 | #ifdef CONFIG_RTC_DRV_DS1374_WDT
|
| 73 | struct watchdog_device wdt;
|
| 74 | #endif
|
| 75 | |
| 76 | * between the enable_irq() in the workqueue and the free_irq()
|
| 77 | * in the remove function.
|
| 78 |
|
| 79 | struct mutex mutex;
|
| 80 | int exiting;
|
| 81 | };
|
| 82 |
|
| 83 | static struct i2c_driver ds1374_driver;
|
| 84 |
|
| 85 | static int ds1374_read_rtc(struct i2c_client *client, u32 *time,
|
| 86 | int reg, int nbytes)
|
| 87 | {
|
| 88 | u8 buf[4];
|
| 89 | int ret;
|
| 90 | int i;
|
| 91 |
|
| 92 | if (WARN_ON(nbytes > 4))
|
| 93 | return -EINVAL;
|
| 94 |
|
| 95 | ret = i2c_smbus_read_i2c_block_data(client, reg, nbytes, buf);
|
| 96 |
|
| 97 | if (ret < 0)
|
| 98 | return ret;
|
| 99 | if (ret < nbytes)
|
| 100 | return -EIO;
|
| 101 |
|
| 102 | for (i = nbytes - 1, *time = 0; i >= 0; i--)
|
| 103 | *time = (*time << 8) | buf[i];
|
| 104 |
|
| 105 | return 0;
|
| 106 | }
|
| 107 |
|
| 108 | static int ds1374_write_rtc(struct i2c_client *client, u32 time,
|
| 109 | int reg, int nbytes)
|
| 110 | {
|
| 111 | u8 buf[4];
|
| 112 | int i;
|
| 113 |
|
| 114 | if (nbytes > 4) {
|
| 115 | WARN_ON(1);
|
| 116 | return -EINVAL;
|
| 117 | }
|
| 118 |
|
| 119 | for (i = 0; i < nbytes; i++) {
|
| 120 | buf[i] = time & 0xff;
|
| 121 | time >>= 8;
|
| 122 | }
|
| 123 |
|
| 124 | return i2c_smbus_write_i2c_block_data(client, reg, nbytes, buf);
|
| 125 | }
|
| 126 |
|
| 127 | static int ds1374_check_rtc_status(struct i2c_client *client)
|
| 128 | {
|
| 129 | int ret = 0;
|
| 130 | int control, stat;
|
| 131 |
|
| 132 | stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
|
| 133 | if (stat < 0)
|
| 134 | return stat;
|
| 135 |
|
| 136 | if (stat & DS1374_REG_SR_OSF)
|
| 137 | dev_warn(&client->dev,
|
| 138 | "oscillator discontinuity flagged, time unreliable\n");
|
| 139 |
|
| 140 | stat &= ~(DS1374_REG_SR_OSF | DS1374_REG_SR_AF);
|
| 141 |
|
| 142 | ret = i2c_smbus_write_byte_data(client, DS1374_REG_SR, stat);
|
| 143 | if (ret < 0)
|
| 144 | return ret;
|
| 145 |
|
| 146 | |
| 147 | * the interrupt, so an interrupt event isn't reported
|
| 148 | * before everything is initialized.
|
| 149 |
|
| 150 |
|
| 151 | control = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
|
| 152 | if (control < 0)
|
| 153 | return control;
|
| 154 |
|
| 155 | control &= ~(DS1374_REG_CR_WACE | DS1374_REG_CR_AIE);
|
| 156 | return i2c_smbus_write_byte_data(client, DS1374_REG_CR, control);
|
| 157 | }
|
| 158 |
|
| 159 | static int ds1374_read_time(struct device *dev, struct rtc_time *time)
|
| 160 | {
|
| 161 | struct i2c_client *client = to_i2c_client(dev);
|
| 162 | u32 itime;
|
| 163 | int ret;
|
| 164 |
|
| 165 | ret = ds1374_read_rtc(client, &itime, DS1374_REG_TOD0, 4);
|
| 166 | if (!ret)
|
| 167 | rtc_time64_to_tm(itime, time);
|
| 168 |
|
| 169 | return ret;
|
| 170 | }
|
| 171 |
|
| 172 | static int ds1374_set_time(struct device *dev, struct rtc_time *time)
|
| 173 | {
|
| 174 | struct i2c_client *client = to_i2c_client(dev);
|
| 175 | unsigned long itime = rtc_tm_to_time64(time);
|
| 176 |
|
| 177 | return ds1374_write_rtc(client, itime, DS1374_REG_TOD0, 4);
|
| 178 | }
|
| 179 |
|
| 180 | #ifndef CONFIG_RTC_DRV_DS1374_WDT
|
| 181 | |
| 182 | * If the time of day is changed, then the alarm will need to be
|
| 183 | * reset.
|
| 184 |
|
| 185 | static int ds1374_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
|
| 186 | {
|
| 187 | struct i2c_client *client = to_i2c_client(dev);
|
| 188 | struct ds1374 *ds1374 = i2c_get_clientdata(client);
|
| 189 | u32 now, cur_alarm;
|
| 190 | int cr, sr;
|
| 191 | int ret = 0;
|
| 192 |
|
| 193 | if (client->irq <= 0)
|
| 194 | return -EINVAL;
|
| 195 |
|
| 196 | mutex_lock(&ds1374->mutex);
|
| 197 |
|
| 198 | cr = ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
|
| 199 | if (ret < 0)
|
| 200 | goto out;
|
| 201 |
|
| 202 | sr = ret = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
|
| 203 | if (ret < 0)
|
| 204 | goto out;
|
| 205 |
|
| 206 | ret = ds1374_read_rtc(client, &now, DS1374_REG_TOD0, 4);
|
| 207 | if (ret)
|
| 208 | goto out;
|
| 209 |
|
| 210 | ret = ds1374_read_rtc(client, &cur_alarm, DS1374_REG_WDALM0, 3);
|
| 211 | if (ret)
|
| 212 | goto out;
|
| 213 |
|
| 214 | rtc_time64_to_tm(now + cur_alarm, &alarm->time);
|
| 215 | alarm->enabled = !!(cr & DS1374_REG_CR_WACE);
|
| 216 | alarm->pending = !!(sr & DS1374_REG_SR_AF);
|
| 217 |
|
| 218 | out:
|
| 219 | mutex_unlock(&ds1374->mutex);
|
| 220 | return ret;
|
| 221 | }
|
| 222 |
|
| 223 | static int ds1374_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
|
| 224 | {
|
| 225 | struct i2c_client *client = to_i2c_client(dev);
|
| 226 | struct ds1374 *ds1374 = i2c_get_clientdata(client);
|
| 227 | struct rtc_time now;
|
| 228 | unsigned long new_alarm, itime;
|
| 229 | int cr;
|
| 230 | int ret = 0;
|
| 231 |
|
| 232 | if (client->irq <= 0)
|
| 233 | return -EINVAL;
|
| 234 |
|
| 235 | ret = ds1374_read_time(dev, &now);
|
| 236 | if (ret < 0)
|
| 237 | return ret;
|
| 238 |
|
| 239 | new_alarm = rtc_tm_to_time64(&alarm->time);
|
| 240 | itime = rtc_tm_to_time64(&now);
|
| 241 |
|
| 242 | |
| 243 | * truly in the past. To avoid requiring the caller to check for
|
| 244 | * races, dates in the past are assumed to be in the recent past
|
| 245 | * (i.e. not something that we'd rather the caller know about via
|
| 246 | * an error), and the alarm is set to go off as soon as possible.
|
| 247 |
|
| 248 | if (time_before_eq(new_alarm, itime))
|
| 249 | new_alarm = 1;
|
| 250 | else
|
| 251 | new_alarm -= itime;
|
| 252 |
|
| 253 | mutex_lock(&ds1374->mutex);
|
| 254 |
|
| 255 | ret = cr = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
|
| 256 | if (ret < 0)
|
| 257 | goto out;
|
| 258 |
|
| 259 | |
| 260 | * (or lack thereof).
|
| 261 | cr &= ~DS1374_REG_CR_WACE;
|
| 262 |
|
| 263 | ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr);
|
| 264 | if (ret < 0)
|
| 265 | goto out;
|
| 266 |
|
| 267 | ret = ds1374_write_rtc(client, new_alarm, DS1374_REG_WDALM0, 3);
|
| 268 | if (ret)
|
| 269 | goto out;
|
| 270 |
|
| 271 | if (alarm->enabled) {
|
| 272 | cr |= DS1374_REG_CR_WACE | DS1374_REG_CR_AIE;
|
| 273 | cr &= ~DS1374_REG_CR_WDALM;
|
| 274 |
|
| 275 | ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr);
|
| 276 | }
|
| 277 |
|
| 278 | out:
|
| 279 | mutex_unlock(&ds1374->mutex);
|
| 280 | return ret;
|
| 281 | }
|
| 282 | #endif
|
| 283 |
|
| 284 | static irqreturn_t ds1374_irq(int irq, void *dev_id)
|
| 285 | {
|
| 286 | struct i2c_client *client = dev_id;
|
| 287 | struct ds1374 *ds1374 = i2c_get_clientdata(client);
|
| 288 |
|
| 289 | disable_irq_nosync(irq);
|
| 290 | schedule_work(&ds1374->work);
|
| 291 | return IRQ_HANDLED;
|
| 292 | }
|
| 293 |
|
| 294 | static void ds1374_work(struct work_struct *work)
|
| 295 | {
|
| 296 | struct ds1374 *ds1374 = container_of(work, struct ds1374, work);
|
| 297 | struct i2c_client *client = ds1374->client;
|
| 298 | int stat, control;
|
| 299 |
|
| 300 | mutex_lock(&ds1374->mutex);
|
| 301 |
|
| 302 | stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
|
| 303 | if (stat < 0)
|
| 304 | goto unlock;
|
| 305 |
|
| 306 | if (stat & DS1374_REG_SR_AF) {
|
| 307 | stat &= ~DS1374_REG_SR_AF;
|
| 308 | i2c_smbus_write_byte_data(client, DS1374_REG_SR, stat);
|
| 309 |
|
| 310 | control = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
|
| 311 | if (control < 0)
|
| 312 | goto out;
|
| 313 |
|
| 314 | control &= ~(DS1374_REG_CR_WACE | DS1374_REG_CR_AIE);
|
| 315 | i2c_smbus_write_byte_data(client, DS1374_REG_CR, control);
|
| 316 |
|
| 317 | rtc_update_irq(ds1374->rtc, 1, RTC_AF | RTC_IRQF);
|
| 318 | }
|
| 319 |
|
| 320 | out:
|
| 321 | if (!ds1374->exiting)
|
| 322 | enable_irq(client->irq);
|
| 323 | unlock:
|
| 324 | mutex_unlock(&ds1374->mutex);
|
| 325 | }
|
| 326 |
|
| 327 | #ifndef CONFIG_RTC_DRV_DS1374_WDT
|
| 328 | static int ds1374_alarm_irq_enable(struct device *dev, unsigned int enabled)
|
| 329 | {
|
| 330 | struct i2c_client *client = to_i2c_client(dev);
|
| 331 | struct ds1374 *ds1374 = i2c_get_clientdata(client);
|
| 332 | int ret;
|
| 333 |
|
| 334 | mutex_lock(&ds1374->mutex);
|
| 335 |
|
| 336 | ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
|
| 337 | if (ret < 0)
|
| 338 | goto out;
|
| 339 |
|
| 340 | if (enabled) {
|
| 341 | ret |= DS1374_REG_CR_WACE | DS1374_REG_CR_AIE;
|
| 342 | ret &= ~DS1374_REG_CR_WDALM;
|
| 343 | } else {
|
| 344 | ret &= ~DS1374_REG_CR_WACE;
|
| 345 | }
|
| 346 | ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, ret);
|
| 347 |
|
| 348 | out:
|
| 349 | mutex_unlock(&ds1374->mutex);
|
| 350 | return ret;
|
| 351 | }
|
| 352 | #endif
|
| 353 |
|
| 354 | static const struct rtc_class_ops ds1374_rtc_ops = {
|
| 355 | .read_time = ds1374_read_time,
|
| 356 | .set_time = ds1374_set_time,
|
| 357 | #ifndef CONFIG_RTC_DRV_DS1374_WDT
|
| 358 | .read_alarm = ds1374_read_alarm,
|
| 359 | .set_alarm = ds1374_set_alarm,
|
| 360 | .alarm_irq_enable = ds1374_alarm_irq_enable,
|
| 361 | #endif
|
| 362 | };
|
| 363 |
|
| 364 | #ifdef CONFIG_RTC_DRV_DS1374_WDT
|
| 365 | |
| 366 | *****************************************************************************
|
| 367 | *
|
| 368 | * Watchdog Driver
|
| 369 | *
|
| 370 | *****************************************************************************
|
| 371 |
|
| 372 |
|
| 373 | #define TIMER_MARGIN_DEFAULT 32
|
| 374 | #define TIMER_MARGIN_MIN 1
|
| 375 | #define TIMER_MARGIN_MAX 4095
|
| 376 |
|
| 377 | static int wdt_margin;
|
| 378 | module_param(wdt_margin, int, 0);
|
| 379 | MODULE_PARM_DESC(wdt_margin, "Watchdog timeout in seconds (default 32s)");
|
| 380 |
|
| 381 | static bool nowayout = WATCHDOG_NOWAYOUT;
|
| 382 | module_param(nowayout, bool, 0);
|
| 383 | MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default ="
|
| 384 | __MODULE_STRING(WATCHDOG_NOWAYOUT)")");
|
| 385 |
|
| 386 | static const struct watchdog_info ds1374_wdt_info = {
|
| 387 | .identity = "DS1374 Watchdog",
|
| 388 | .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
|
| 389 | WDIOF_MAGICCLOSE,
|
| 390 | };
|
| 391 |
|
| 392 | static int ds1374_wdt_settimeout(struct watchdog_device *wdt, unsigned int timeout)
|
| 393 | {
|
| 394 | struct ds1374 *ds1374 = watchdog_get_drvdata(wdt);
|
| 395 | struct i2c_client *client = ds1374->client;
|
| 396 | int ret, cr;
|
| 397 |
|
| 398 | wdt->timeout = timeout;
|
| 399 |
|
| 400 | cr = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
|
| 401 | if (cr < 0)
|
| 402 | return cr;
|
| 403 |
|
| 404 |
|
| 405 | cr &= ~DS1374_REG_CR_WACE;
|
| 406 |
|
| 407 | ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr);
|
| 408 | if (ret < 0)
|
| 409 | return ret;
|
| 410 |
|
| 411 |
|
| 412 | timeout = timeout * 4096;
|
| 413 | ret = ds1374_write_rtc(client, timeout, DS1374_REG_WDALM0, 3);
|
| 414 | if (ret)
|
| 415 | return ret;
|
| 416 |
|
| 417 |
|
| 418 | cr |= DS1374_REG_CR_WACE | DS1374_REG_CR_WDALM;
|
| 419 | cr &= ~DS1374_REG_CR_WDSTR;
|
| 420 | cr &= ~DS1374_REG_CR_AIE;
|
| 421 |
|
| 422 | ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr);
|
| 423 | if (ret < 0)
|
| 424 | return ret;
|
| 425 |
|
| 426 | return 0;
|
| 427 | }
|
| 428 |
|
| 429 | |
| 430 | * Reload the watchdog timer. (ie, pat the watchdog)
|
| 431 |
|
| 432 | static int ds1374_wdt_start(struct watchdog_device *wdt)
|
| 433 | {
|
| 434 | struct ds1374 *ds1374 = watchdog_get_drvdata(wdt);
|
| 435 | u32 val;
|
| 436 |
|
| 437 | return ds1374_read_rtc(ds1374->client, &val, DS1374_REG_WDALM0, 3);
|
| 438 | }
|
| 439 |
|
| 440 | static int ds1374_wdt_stop(struct watchdog_device *wdt)
|
| 441 | {
|
| 442 | struct ds1374 *ds1374 = watchdog_get_drvdata(wdt);
|
| 443 | struct i2c_client *client = ds1374->client;
|
| 444 | int cr;
|
| 445 |
|
| 446 | cr = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
|
| 447 | if (cr < 0)
|
| 448 | return cr;
|
| 449 |
|
| 450 |
|
| 451 | cr &= ~DS1374_REG_CR_WACE;
|
| 452 |
|
| 453 | return i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr);
|
| 454 | }
|
| 455 |
|
| 456 | static const struct watchdog_ops ds1374_wdt_ops = {
|
| 457 | .owner = THIS_MODULE,
|
| 458 | .start = ds1374_wdt_start,
|
| 459 | .stop = ds1374_wdt_stop,
|
| 460 | .set_timeout = ds1374_wdt_settimeout,
|
| 461 | };
|
| 462 | #endif
|
| 463 | |
| 464 | *****************************************************************************
|
| 465 | *
|
| 466 | * Driver Interface
|
| 467 | *
|
| 468 | *****************************************************************************
|
| 469 |
|
| 470 | static int ds1374_probe(struct i2c_client *client)
|
| 471 | {
|
| 472 | struct ds1374 *ds1374;
|
| 473 | int ret;
|
| 474 |
|
| 475 | ds1374 = devm_kzalloc(&client->dev, sizeof(struct ds1374), GFP_KERNEL);
|
| 476 | if (!ds1374)
|
| 477 | return -ENOMEM;
|
| 478 |
|
| 479 | ds1374->rtc = devm_rtc_allocate_device(&client->dev);
|
| 480 | if (IS_ERR(ds1374->rtc))
|
| 481 | return PTR_ERR(ds1374->rtc);
|
| 482 |
|
| 483 | ds1374->client = client;
|
| 484 | i2c_set_clientdata(client, ds1374);
|
| 485 |
|
| 486 | INIT_WORK(&ds1374->work, ds1374_work);
|
| 487 | mutex_init(&ds1374->mutex);
|
| 488 |
|
| 489 | ret = ds1374_check_rtc_status(client);
|
| 490 | if (ret)
|
| 491 | return ret;
|
| 492 |
|
| 493 | if (client->irq > 0) {
|
| 494 | ret = devm_request_irq(&client->dev, client->irq, ds1374_irq, 0,
|
| 495 | "ds1374", client);
|
| 496 | if (ret) {
|
| 497 | dev_err(&client->dev, "unable to request IRQ\n");
|
| 498 | return ret;
|
| 499 | }
|
| 500 |
|
| 501 | device_set_wakeup_capable(&client->dev, 1);
|
| 502 | }
|
| 503 |
|
| 504 | ds1374->rtc->ops = &ds1374_rtc_ops;
|
| 505 | ds1374->rtc->range_max = U32_MAX;
|
| 506 |
|
| 507 | ret = devm_rtc_register_device(ds1374->rtc);
|
| 508 | if (ret)
|
| 509 | return ret;
|
| 510 |
|
| 511 | #ifdef CONFIG_RTC_DRV_DS1374_WDT
|
| 512 | ds1374->wdt.info = &ds1374_wdt_info;
|
| 513 | ds1374->wdt.ops = &ds1374_wdt_ops;
|
| 514 | ds1374->wdt.timeout = TIMER_MARGIN_DEFAULT;
|
| 515 | ds1374->wdt.min_timeout = TIMER_MARGIN_MIN;
|
| 516 | ds1374->wdt.max_timeout = TIMER_MARGIN_MAX;
|
| 517 |
|
| 518 | watchdog_init_timeout(&ds1374->wdt, wdt_margin, &client->dev);
|
| 519 | watchdog_set_nowayout(&ds1374->wdt, nowayout);
|
| 520 | watchdog_stop_on_reboot(&ds1374->wdt);
|
| 521 | watchdog_stop_on_unregister(&ds1374->wdt);
|
| 522 | watchdog_set_drvdata(&ds1374->wdt, ds1374);
|
| 523 | ds1374_wdt_settimeout(&ds1374->wdt, ds1374->wdt.timeout);
|
| 524 |
|
| 525 | ret = devm_watchdog_register_device(&client->dev, &ds1374->wdt);
|
| 526 | if (ret)
|
| 527 | return ret;
|
| 528 | #endif
|
| 529 |
|
| 530 | return 0;
|
| 531 | }
|
| 532 |
|
| 533 | static void ds1374_remove(struct i2c_client *client)
|
| 534 | {
|
| 535 | struct ds1374 *ds1374 = i2c_get_clientdata(client);
|
| 536 |
|
| 537 | if (client->irq > 0) {
|
| 538 | mutex_lock(&ds1374->mutex);
|
| 539 | ds1374->exiting = 1;
|
| 540 | mutex_unlock(&ds1374->mutex);
|
| 541 |
|
| 542 | devm_free_irq(&client->dev, client->irq, client);
|
| 543 | cancel_work_sync(&ds1374->work);
|
| 544 | }
|
| 545 | }
|
| 546 |
|
| 547 | #ifdef CONFIG_PM_SLEEP
|
| 548 | static int ds1374_suspend(struct device *dev)
|
| 549 | {
|
| 550 | struct i2c_client *client = to_i2c_client(dev);
|
| 551 |
|
| 552 | if (client->irq > 0 && device_may_wakeup(&client->dev))
|
| 553 | enable_irq_wake(client->irq);
|
| 554 | return 0;
|
| 555 | }
|
| 556 |
|
| 557 | static int ds1374_resume(struct device *dev)
|
| 558 | {
|
| 559 | struct i2c_client *client = to_i2c_client(dev);
|
| 560 |
|
| 561 | if (client->irq > 0 && device_may_wakeup(&client->dev))
|
| 562 | disable_irq_wake(client->irq);
|
| 563 | return 0;
|
| 564 | }
|
| 565 | #endif
|
| 566 |
|
| 567 | static SIMPLE_DEV_PM_OPS(ds1374_pm, ds1374_suspend, ds1374_resume);
|
| 568 |
|
| 569 | static struct i2c_driver ds1374_driver = {
|
| 570 | .driver = {
|
| 571 | .name = "rtc-ds1374",
|
| 572 | .of_match_table = of_match_ptr(ds1374_of_match),
|
| 573 | .pm = &ds1374_pm,
|
| 574 | },
|
| 575 | .probe = ds1374_probe,
|
| 576 | .remove = ds1374_remove,
|
| 577 | .id_table = ds1374_id,
|
| 578 | };
|
| 579 |
|
| 580 | module_i2c_driver(ds1374_driver);
|
| 581 |
|
| 582 | MODULE_AUTHOR("Scott Wood <[email protected]>");
|
| 583 | MODULE_DESCRIPTION("Maxim/Dallas DS1374 RTC Driver");
|
| 584 | MODULE_LICENSE("GPL");
|