| 1 | |
| 2 | |
| 3 | * A SPI driver for the Ricoh RS5C348 RTC
|
| 4 | *
|
| 5 | * Copyright (C) 2006 Atsushi Nemoto <[email protected]>
|
| 6 | *
|
| 7 | * The board specific init code should provide characteristics of this
|
| 8 | * device:
|
| 9 | * Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS
|
| 10 |
|
| 11 |
|
| 12 | #include <linux/bcd.h>
|
| 13 | #include <linux/delay.h>
|
| 14 | #include <linux/device.h>
|
| 15 | #include <linux/errno.h>
|
| 16 | #include <linux/init.h>
|
| 17 | #include <linux/kernel.h>
|
| 18 | #include <linux/string.h>
|
| 19 | #include <linux/slab.h>
|
| 20 | #include <linux/rtc.h>
|
| 21 | #include <linux/workqueue.h>
|
| 22 | #include <linux/spi/spi.h>
|
| 23 | #include <linux/module.h>
|
| 24 |
|
| 25 | #define RS5C348_REG_SECS 0
|
| 26 | #define RS5C348_REG_MINS 1
|
| 27 | #define RS5C348_REG_HOURS 2
|
| 28 | #define RS5C348_REG_WDAY 3
|
| 29 | #define RS5C348_REG_DAY 4
|
| 30 | #define RS5C348_REG_MONTH 5
|
| 31 | #define RS5C348_REG_YEAR 6
|
| 32 | #define RS5C348_REG_CTL1 14
|
| 33 | #define RS5C348_REG_CTL2 15
|
| 34 |
|
| 35 | #define RS5C348_SECS_MASK 0x7f
|
| 36 | #define RS5C348_MINS_MASK 0x7f
|
| 37 | #define RS5C348_HOURS_MASK 0x3f
|
| 38 | #define RS5C348_WDAY_MASK 0x03
|
| 39 | #define RS5C348_DAY_MASK 0x3f
|
| 40 | #define RS5C348_MONTH_MASK 0x1f
|
| 41 |
|
| 42 | #define RS5C348_BIT_PM 0x20
|
| 43 | #define RS5C348_BIT_Y2K 0x80
|
| 44 | #define RS5C348_BIT_24H 0x20
|
| 45 | #define RS5C348_BIT_XSTP 0x10
|
| 46 | #define RS5C348_BIT_VDET 0x40
|
| 47 |
|
| 48 | #define RS5C348_CMD_W(addr) (((addr) << 4) | 0x08)
|
| 49 | #define RS5C348_CMD_R(addr) (((addr) << 4) | 0x0c)
|
| 50 | #define RS5C348_CMD_MW(addr) (((addr) << 4) | 0x00)
|
| 51 | #define RS5C348_CMD_MR(addr) (((addr) << 4) | 0x04)
|
| 52 |
|
| 53 | struct rs5c348_plat_data {
|
| 54 | struct rtc_device *rtc;
|
| 55 | int rtc_24h;
|
| 56 | };
|
| 57 |
|
| 58 | static int
|
| 59 | rs5c348_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
| 60 | {
|
| 61 | struct spi_device *spi = to_spi_device(dev);
|
| 62 | struct rs5c348_plat_data *pdata = dev_get_platdata(&spi->dev);
|
| 63 | u8 txbuf[5+7], *txp;
|
| 64 | int ret;
|
| 65 |
|
| 66 | ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_CTL2));
|
| 67 | if (ret < 0)
|
| 68 | return ret;
|
| 69 | if (ret & RS5C348_BIT_XSTP) {
|
| 70 | txbuf[0] = RS5C348_CMD_W(RS5C348_REG_CTL2);
|
| 71 | txbuf[1] = 0;
|
| 72 | ret = spi_write_then_read(spi, txbuf, 2, NULL, 0);
|
| 73 | if (ret < 0)
|
| 74 | return ret;
|
| 75 | }
|
| 76 |
|
| 77 |
|
| 78 | txp = txbuf;
|
| 79 | txbuf[0] = RS5C348_CMD_R(RS5C348_REG_CTL2);
|
| 80 | txbuf[1] = 0;
|
| 81 | txbuf[2] = RS5C348_CMD_R(RS5C348_REG_CTL2);
|
| 82 | txbuf[3] = 0;
|
| 83 | txbuf[4] = RS5C348_CMD_MW(RS5C348_REG_SECS);
|
| 84 | txp = &txbuf[5];
|
| 85 | txp[RS5C348_REG_SECS] = bin2bcd(tm->tm_sec);
|
| 86 | txp[RS5C348_REG_MINS] = bin2bcd(tm->tm_min);
|
| 87 | if (pdata->rtc_24h) {
|
| 88 | txp[RS5C348_REG_HOURS] = bin2bcd(tm->tm_hour);
|
| 89 | } else {
|
| 90 |
|
| 91 | txp[RS5C348_REG_HOURS] = bin2bcd((tm->tm_hour + 11) % 12 + 1) |
|
| 92 | (tm->tm_hour >= 12 ? RS5C348_BIT_PM : 0);
|
| 93 | }
|
| 94 | txp[RS5C348_REG_WDAY] = bin2bcd(tm->tm_wday);
|
| 95 | txp[RS5C348_REG_DAY] = bin2bcd(tm->tm_mday);
|
| 96 | txp[RS5C348_REG_MONTH] = bin2bcd(tm->tm_mon + 1) |
|
| 97 | (tm->tm_year >= 100 ? RS5C348_BIT_Y2K : 0);
|
| 98 | txp[RS5C348_REG_YEAR] = bin2bcd(tm->tm_year % 100);
|
| 99 |
|
| 100 | ret = spi_write_then_read(spi, txbuf, sizeof(txbuf), NULL, 0);
|
| 101 | udelay(62);
|
| 102 | return ret;
|
| 103 | }
|
| 104 |
|
| 105 | static int
|
| 106 | rs5c348_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
| 107 | {
|
| 108 | struct spi_device *spi = to_spi_device(dev);
|
| 109 | struct rs5c348_plat_data *pdata = dev_get_platdata(&spi->dev);
|
| 110 | u8 txbuf[5], rxbuf[7];
|
| 111 | int ret;
|
| 112 |
|
| 113 | ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_CTL2));
|
| 114 | if (ret < 0)
|
| 115 | return ret;
|
| 116 | if (ret & RS5C348_BIT_VDET)
|
| 117 | dev_warn(&spi->dev, "voltage-low detected.\n");
|
| 118 | if (ret & RS5C348_BIT_XSTP) {
|
| 119 | dev_warn(&spi->dev, "oscillator-stop detected.\n");
|
| 120 | return -EINVAL;
|
| 121 | }
|
| 122 |
|
| 123 |
|
| 124 | txbuf[0] = RS5C348_CMD_R(RS5C348_REG_CTL2);
|
| 125 | txbuf[1] = 0;
|
| 126 | txbuf[2] = RS5C348_CMD_R(RS5C348_REG_CTL2);
|
| 127 | txbuf[3] = 0;
|
| 128 | txbuf[4] = RS5C348_CMD_MR(RS5C348_REG_SECS);
|
| 129 |
|
| 130 |
|
| 131 | ret = spi_write_then_read(spi, txbuf, sizeof(txbuf),
|
| 132 | rxbuf, sizeof(rxbuf));
|
| 133 | udelay(62);
|
| 134 | if (ret < 0)
|
| 135 | return ret;
|
| 136 |
|
| 137 | tm->tm_sec = bcd2bin(rxbuf[RS5C348_REG_SECS] & RS5C348_SECS_MASK);
|
| 138 | tm->tm_min = bcd2bin(rxbuf[RS5C348_REG_MINS] & RS5C348_MINS_MASK);
|
| 139 | tm->tm_hour = bcd2bin(rxbuf[RS5C348_REG_HOURS] & RS5C348_HOURS_MASK);
|
| 140 | if (!pdata->rtc_24h) {
|
| 141 | if (rxbuf[RS5C348_REG_HOURS] & RS5C348_BIT_PM) {
|
| 142 | tm->tm_hour -= 20;
|
| 143 | tm->tm_hour %= 12;
|
| 144 | tm->tm_hour += 12;
|
| 145 | } else
|
| 146 | tm->tm_hour %= 12;
|
| 147 | }
|
| 148 | tm->tm_wday = bcd2bin(rxbuf[RS5C348_REG_WDAY] & RS5C348_WDAY_MASK);
|
| 149 | tm->tm_mday = bcd2bin(rxbuf[RS5C348_REG_DAY] & RS5C348_DAY_MASK);
|
| 150 | tm->tm_mon =
|
| 151 | bcd2bin(rxbuf[RS5C348_REG_MONTH] & RS5C348_MONTH_MASK) - 1;
|
| 152 |
|
| 153 | tm->tm_year = bcd2bin(rxbuf[RS5C348_REG_YEAR]) +
|
| 154 | ((rxbuf[RS5C348_REG_MONTH] & RS5C348_BIT_Y2K) ? 100 : 0);
|
| 155 |
|
| 156 | return 0;
|
| 157 | }
|
| 158 |
|
| 159 | static const struct rtc_class_ops rs5c348_rtc_ops = {
|
| 160 | .read_time = rs5c348_rtc_read_time,
|
| 161 | .set_time = rs5c348_rtc_set_time,
|
| 162 | };
|
| 163 |
|
| 164 | static int rs5c348_probe(struct spi_device *spi)
|
| 165 | {
|
| 166 | int ret;
|
| 167 | struct rtc_device *rtc;
|
| 168 | struct rs5c348_plat_data *pdata;
|
| 169 |
|
| 170 | pdata = devm_kzalloc(&spi->dev, sizeof(struct rs5c348_plat_data),
|
| 171 | GFP_KERNEL);
|
| 172 | if (!pdata)
|
| 173 | return -ENOMEM;
|
| 174 | spi->dev.platform_data = pdata;
|
| 175 |
|
| 176 |
|
| 177 | ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_SECS));
|
| 178 | if (ret < 0 || (ret & 0x80)) {
|
| 179 | dev_err(&spi->dev, "not found.\n");
|
| 180 | return ret;
|
| 181 | }
|
| 182 |
|
| 183 | dev_info(&spi->dev, "spiclk %u KHz.\n",
|
| 184 | (spi->max_speed_hz + 500) / 1000);
|
| 185 |
|
| 186 | ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_CTL1));
|
| 187 | if (ret < 0)
|
| 188 | return ret;
|
| 189 | if (ret & RS5C348_BIT_24H)
|
| 190 | pdata->rtc_24h = 1;
|
| 191 |
|
| 192 | rtc = devm_rtc_allocate_device(&spi->dev);
|
| 193 | if (IS_ERR(rtc))
|
| 194 | return PTR_ERR(rtc);
|
| 195 |
|
| 196 | pdata->rtc = rtc;
|
| 197 |
|
| 198 | rtc->ops = &rs5c348_rtc_ops;
|
| 199 |
|
| 200 | return devm_rtc_register_device(rtc);
|
| 201 | }
|
| 202 |
|
| 203 | static struct spi_driver rs5c348_driver = {
|
| 204 | .driver = {
|
| 205 | .name = "rtc-rs5c348",
|
| 206 | },
|
| 207 | .probe = rs5c348_probe,
|
| 208 | };
|
| 209 |
|
| 210 | module_spi_driver(rs5c348_driver);
|
| 211 |
|
| 212 | MODULE_AUTHOR("Atsushi Nemoto <[email protected]>");
|
| 213 | MODULE_DESCRIPTION("Ricoh RS5C348 RTC driver");
|
| 214 | MODULE_LICENSE("GPL");
|
| 215 | MODULE_ALIAS("spi:rtc-rs5c348");
|