projects/linux·blob master · refs

1047 lines · 34.9 KiB

1/* SPDX-License-Identifier: GPL-2.0-or-later */
2/*
3 * pmcraid.h -- PMC Sierra MaxRAID controller driver header file
4 *
5 * Written By: Anil Ravindranath<[email protected]>
6 * PMC-Sierra Inc
7 *
8 * Copyright (C) 2008, 2009 PMC Sierra Inc.
9 */
10
11#ifndef _PMCRAID_H
12#define _PMCRAID_H
13
14#include <linux/types.h>
15#include <linux/completion.h>
16#include <linux/list.h>
17#include <scsi/scsi.h>
18#include <scsi/scsi_cmnd.h>
19#include <linux/cdev.h>
20#include <net/netlink.h>
21#include <net/genetlink.h>
22#include <linux/connector.h>
23/*
24 * Driver name : string representing the driver name
25 * Device file : /dev file to be used for management interfaces
26 * Driver version: version string in major_version.minor_version.patch format
27 * Driver date : date information in "Mon dd yyyy" format
28 */
29#define PMCRAID_DRIVER_NAME "PMC MaxRAID"
30#define PMCRAID_DEVFILE "pmcsas"
31#define PMCRAID_DRIVER_VERSION "1.0.3"
32
33#define PMCRAID_FW_VERSION_1 0x002
34
35/* Maximum number of adapters supported by current version of the driver */
36#define PMCRAID_MAX_ADAPTERS 1024
37
38/* Bit definitions as per firmware, bit position [0][1][2].....[31] */
39#define PMC_BIT8(n) (1 << (7-n))
40#define PMC_BIT16(n) (1 << (15-n))
41#define PMC_BIT32(n) (1 << (31-n))
42
43/* PMC PCI vendor ID and device ID values */
44#define PCI_VENDOR_ID_PMC 0x11F8
45#define PCI_DEVICE_ID_PMC_MAXRAID 0x5220
46
47/*
48 * MAX_CMD : maximum commands that can be outstanding with IOA
49 * MAX_IO_CMD : command blocks available for IO commands
50 * MAX_HCAM_CMD : command blocks available for HCAMS
51 * MAX_INTERNAL_CMD : command blocks available for internal commands like reset
52 */
53#define PMCRAID_MAX_CMD 1024
54#define PMCRAID_MAX_IO_CMD 1020
55#define PMCRAID_MAX_HCAM_CMD 2
56#define PMCRAID_MAX_INTERNAL_CMD 2
57
58/* MAX_IOADLS : max number of scatter-gather lists supported by IOA
59 * IOADLS_INTERNAL : number of ioadls included as part of IOARCB.
60 * IOADLS_EXTERNAL : number of ioadls allocated external to IOARCB
61 */
62#define PMCRAID_IOADLS_INTERNAL 27
63#define PMCRAID_IOADLS_EXTERNAL 37
64#define PMCRAID_MAX_IOADLS PMCRAID_IOADLS_INTERNAL
65
66/* HRRQ_ENTRY_SIZE : size of hrrq buffer
67 * IOARCB_ALIGNMENT : alignment required for IOARCB
68 * IOADL_ALIGNMENT : alignment requirement for IOADLs
69 * MSIX_VECTORS : number of MSIX vectors supported
70 */
71#define HRRQ_ENTRY_SIZE sizeof(__le32)
72#define PMCRAID_IOARCB_ALIGNMENT 32
73#define PMCRAID_IOADL_ALIGNMENT 16
74#define PMCRAID_IOASA_ALIGNMENT 4
75#define PMCRAID_NUM_MSIX_VECTORS 16
76
77/* various other limits */
78#define PMCRAID_VENDOR_ID_LEN 8
79#define PMCRAID_PRODUCT_ID_LEN 16
80#define PMCRAID_SERIAL_NUM_LEN 8
81#define PMCRAID_LUN_LEN 8
82#define PMCRAID_MAX_CDB_LEN 16
83#define PMCRAID_DEVICE_ID_LEN 8
84#define PMCRAID_SENSE_DATA_LEN 256
85#define PMCRAID_ADD_CMD_PARAM_LEN 48
86
87#define PMCRAID_MAX_BUS_TO_SCAN 1
88#define PMCRAID_MAX_NUM_TARGETS_PER_BUS 256
89#define PMCRAID_MAX_NUM_LUNS_PER_TARGET 8
90
91/* IOA bus/target/lun number of IOA resources */
92#define PMCRAID_IOA_BUS_ID 0xfe
93#define PMCRAID_IOA_TARGET_ID 0xff
94#define PMCRAID_IOA_LUN_ID 0xff
95#define PMCRAID_VSET_BUS_ID 0x1
96#define PMCRAID_VSET_LUN_ID 0x0
97#define PMCRAID_PHYS_BUS_ID 0x0
98#define PMCRAID_VIRTUAL_ENCL_BUS_ID 0x8
99#define PMCRAID_MAX_VSET_TARGETS 0x7F
100#define PMCRAID_MAX_VSET_LUNS_PER_TARGET 8
101
102#define PMCRAID_IOA_MAX_SECTORS 32767
103#define PMCRAID_VSET_MAX_SECTORS 512
104#define PMCRAID_MAX_CMD_PER_LUN 254
105
106/* Number of configuration table entries (resources), includes 1 FP,
107 * 1 Enclosure device
108 */
109#define PMCRAID_MAX_RESOURCES 256
110
111/* Adapter Commands used by driver */
112#define PMCRAID_QUERY_RESOURCE_STATE 0xC2
113#define PMCRAID_RESET_DEVICE 0xC3
114/* options to select reset target */
115#define ENABLE_RESET_MODIFIER 0x80
116#define RESET_DEVICE_LUN 0x40
117#define RESET_DEVICE_TARGET 0x20
118#define RESET_DEVICE_BUS 0x10
119
120#define PMCRAID_IDENTIFY_HRRQ 0xC4
121#define PMCRAID_QUERY_IOA_CONFIG 0xC5
122#define PMCRAID_QUERY_CMD_STATUS 0xCB
123#define PMCRAID_ABORT_CMD 0xC7
124
125/* CANCEL ALL command, provides option for setting SYNC_COMPLETE
126 * on the target resources for which commands got cancelled
127 */
128#define PMCRAID_CANCEL_ALL_REQUESTS 0xCE
129#define PMCRAID_SYNC_COMPLETE_AFTER_CANCEL PMC_BIT8(0)
130
131/* HCAM command and types of HCAM supported by IOA */
132#define PMCRAID_HOST_CONTROLLED_ASYNC 0xCF
133#define PMCRAID_HCAM_CODE_CONFIG_CHANGE 0x01
134#define PMCRAID_HCAM_CODE_LOG_DATA 0x02
135
136/* IOA shutdown command and various shutdown types */
137#define PMCRAID_IOA_SHUTDOWN 0xF7
138#define PMCRAID_SHUTDOWN_NORMAL 0x00
139#define PMCRAID_SHUTDOWN_PREPARE_FOR_NORMAL 0x40
140#define PMCRAID_SHUTDOWN_NONE 0x100
141#define PMCRAID_SHUTDOWN_ABBREV 0x80
142
143/* SET SUPPORTED DEVICES command and the option to select all the
144 * devices to be supported
145 */
146#define PMCRAID_SET_SUPPORTED_DEVICES 0xFB
147#define ALL_DEVICES_SUPPORTED PMC_BIT8(0)
148
149/* This option is used with SCSI WRITE_BUFFER command */
150#define PMCRAID_WR_BUF_DOWNLOAD_AND_SAVE 0x05
151
152/* IOASC Codes used by driver */
153#define PMCRAID_IOASC_SENSE_MASK 0xFFFFFF00
154#define PMCRAID_IOASC_SENSE_KEY(ioasc) ((ioasc) >> 24)
155#define PMCRAID_IOASC_SENSE_CODE(ioasc) (((ioasc) & 0x00ff0000) >> 16)
156#define PMCRAID_IOASC_SENSE_QUAL(ioasc) (((ioasc) & 0x0000ff00) >> 8)
157#define PMCRAID_IOASC_SENSE_STATUS(ioasc) ((ioasc) & 0x000000ff)
158
159#define PMCRAID_IOASC_GOOD_COMPLETION 0x00000000
160#define PMCRAID_IOASC_GC_IOARCB_NOTFOUND 0x005A0000
161#define PMCRAID_IOASC_NR_INIT_CMD_REQUIRED 0x02040200
162#define PMCRAID_IOASC_NR_IOA_RESET_REQUIRED 0x02048000
163#define PMCRAID_IOASC_NR_SYNC_REQUIRED 0x023F0000
164#define PMCRAID_IOASC_ME_READ_ERROR_NO_REALLOC 0x03110C00
165#define PMCRAID_IOASC_HW_CANNOT_COMMUNICATE 0x04050000
166#define PMCRAID_IOASC_HW_DEVICE_TIMEOUT 0x04080100
167#define PMCRAID_IOASC_HW_DEVICE_BUS_STATUS_ERROR 0x04448500
168#define PMCRAID_IOASC_HW_IOA_RESET_REQUIRED 0x04448600
169#define PMCRAID_IOASC_IR_INVALID_RESOURCE_HANDLE 0x05250000
170#define PMCRAID_IOASC_AC_TERMINATED_BY_HOST 0x0B5A0000
171#define PMCRAID_IOASC_UA_BUS_WAS_RESET 0x06290000
172#define PMCRAID_IOASC_TIME_STAMP_OUT_OF_SYNC 0x06908B00
173#define PMCRAID_IOASC_UA_BUS_WAS_RESET_BY_OTHER 0x06298000
174
175/* Driver defined IOASCs */
176#define PMCRAID_IOASC_IOA_WAS_RESET 0x10000001
177#define PMCRAID_IOASC_PCI_ACCESS_ERROR 0x10000002
178
179/* Various timeout values (in milliseconds) used. If any of these are chip
180 * specific, move them to pmcraid_chip_details structure.
181 */
182#define PMCRAID_PCI_DEASSERT_TIMEOUT 2000
183#define PMCRAID_BIST_TIMEOUT 2000
184#define PMCRAID_AENWAIT_TIMEOUT 5000
185#define PMCRAID_TRANSOP_TIMEOUT 60000
186
187#define PMCRAID_RESET_TIMEOUT (2 * HZ)
188#define PMCRAID_CHECK_FOR_RESET_TIMEOUT ((HZ / 10))
189#define PMCRAID_VSET_IO_TIMEOUT (60 * HZ)
190#define PMCRAID_INTERNAL_TIMEOUT (60 * HZ)
191#define PMCRAID_SHUTDOWN_TIMEOUT (150 * HZ)
192#define PMCRAID_RESET_BUS_TIMEOUT (60 * HZ)
193#define PMCRAID_RESET_HOST_TIMEOUT (150 * HZ)
194#define PMCRAID_REQUEST_SENSE_TIMEOUT (30 * HZ)
195#define PMCRAID_SET_SUP_DEV_TIMEOUT (2 * 60 * HZ)
196
197/* structure to represent a scatter-gather element (IOADL descriptor) */
198struct pmcraid_ioadl_desc {
199 __le64 address;
200 __le32 data_len;
201 __u8 reserved[3];
202 __u8 flags;
203} __attribute__((packed, aligned(PMCRAID_IOADL_ALIGNMENT)));
204
205/* pmcraid_ioadl_desc.flags values */
206#define IOADL_FLAGS_CHAINED PMC_BIT8(0)
207#define IOADL_FLAGS_LAST_DESC PMC_BIT8(1)
208#define IOADL_FLAGS_READ_LAST PMC_BIT8(1)
209#define IOADL_FLAGS_WRITE_LAST PMC_BIT8(1)
210
211
212/* additional IOARCB data which can be CDB or additional request parameters
213 * or list of IOADLs. Firmware supports max of 512 bytes for IOARCB, hence then
214 * number of IOADLs are limted to 27. In case they are more than 27, they will
215 * be used in chained form
216 */
217struct pmcraid_ioarcb_add_data {
218 union {
219 struct pmcraid_ioadl_desc ioadl[PMCRAID_IOADLS_INTERNAL];
220 __u8 add_cmd_params[PMCRAID_ADD_CMD_PARAM_LEN];
221 } u;
222};
223
224/*
225 * IOA Request Control Block
226 */
227struct pmcraid_ioarcb {
228 __le64 ioarcb_bus_addr;
229 __le32 resource_handle;
230 __le32 response_handle;
231 __le64 ioadl_bus_addr;
232 __le32 ioadl_length;
233 __le32 data_transfer_length;
234 __le64 ioasa_bus_addr;
235 __le16 ioasa_len;
236 __le16 cmd_timeout;
237 __le16 add_cmd_param_offset;
238 __le16 add_cmd_param_length;
239 __le32 reserved1[2];
240 __le32 reserved2;
241 __u8 request_type;
242 __u8 request_flags0;
243 __u8 request_flags1;
244 __u8 hrrq_id;
245 __u8 cdb[PMCRAID_MAX_CDB_LEN];
246 struct pmcraid_ioarcb_add_data add_data;
247};
248
249/* well known resource handle values */
250#define PMCRAID_IOA_RES_HANDLE 0xffffffff
251#define PMCRAID_INVALID_RES_HANDLE 0
252
253/* pmcraid_ioarcb.request_type values */
254#define REQ_TYPE_SCSI 0x00
255#define REQ_TYPE_IOACMD 0x01
256#define REQ_TYPE_HCAM 0x02
257
258/* pmcraid_ioarcb.flags0 values */
259#define TRANSFER_DIR_WRITE PMC_BIT8(0)
260#define INHIBIT_UL_CHECK PMC_BIT8(2)
261#define SYNC_OVERRIDE PMC_BIT8(3)
262#define SYNC_COMPLETE PMC_BIT8(4)
263#define NO_LINK_DESCS PMC_BIT8(5)
264
265/* pmcraid_ioarcb.flags1 values */
266#define DELAY_AFTER_RESET PMC_BIT8(0)
267#define TASK_TAG_SIMPLE 0x10
268#define TASK_TAG_ORDERED 0x20
269#define TASK_TAG_QUEUE_HEAD 0x30
270
271/* toggle bit offset in response handle */
272#define HRRQ_TOGGLE_BIT 0x01
273#define HRRQ_RESPONSE_BIT 0x02
274
275/* IOA Status Area */
276struct pmcraid_ioasa_vset {
277 __le32 failing_lba_hi;
278 __le32 failing_lba_lo;
279 __le32 reserved;
280} __attribute__((packed, aligned(4)));
281
282struct pmcraid_ioasa {
283 __le32 ioasc;
284 __le16 returned_status_length;
285 __le16 available_status_length;
286 __le32 residual_data_length;
287 __le32 ilid;
288 __le32 fd_ioasc;
289 __le32 fd_res_address;
290 __le32 fd_res_handle;
291 __le32 reserved;
292
293 /* resource specific sense information */
294 union {
295 struct pmcraid_ioasa_vset vset;
296 } u;
297
298 /* IOA autosense data */
299 __le16 auto_sense_length;
300 __le16 error_data_length;
301 __u8 sense_data[PMCRAID_SENSE_DATA_LEN];
302} __attribute__((packed, aligned(4)));
303
304#define PMCRAID_DRIVER_ILID 0xffffffff
305
306/* Config Table Entry per Resource */
307struct pmcraid_config_table_entry {
308 __u8 resource_type;
309 __u8 bus_protocol;
310 __le16 array_id;
311 __u8 common_flags0;
312 __u8 common_flags1;
313 __u8 unique_flags0;
314 __u8 unique_flags1; /*also used as vset target_id */
315 __le32 resource_handle;
316 __le32 resource_address;
317 __u8 device_id[PMCRAID_DEVICE_ID_LEN];
318 __u8 lun[PMCRAID_LUN_LEN];
319} __attribute__((packed, aligned(4)));
320
321/* extended configuration table sizes are also of 32 bytes in size */
322struct pmcraid_config_table_entry_ext {
323 struct pmcraid_config_table_entry cfgte;
324};
325
326/* resource types (config_table_entry.resource_type values) */
327#define RES_TYPE_AF_DASD 0x00
328#define RES_TYPE_GSCSI 0x01
329#define RES_TYPE_VSET 0x02
330#define RES_TYPE_IOA_FP 0xFF
331
332#define RES_IS_IOA(res) ((res).resource_type == RES_TYPE_IOA_FP)
333#define RES_IS_GSCSI(res) ((res).resource_type == RES_TYPE_GSCSI)
334#define RES_IS_VSET(res) ((res).resource_type == RES_TYPE_VSET)
335#define RES_IS_AFDASD(res) ((res).resource_type == RES_TYPE_AF_DASD)
336
337/* bus_protocol values used by driver */
338#define RES_TYPE_VENCLOSURE 0x8
339
340/* config_table_entry.common_flags0 */
341#define MULTIPATH_RESOURCE PMC_BIT32(0)
342
343/* unique_flags1 */
344#define IMPORT_MODE_MANUAL PMC_BIT8(0)
345
346/* well known resource handle values */
347#define RES_HANDLE_IOA 0xFFFFFFFF
348#define RES_HANDLE_NONE 0x00000000
349
350/* well known resource address values */
351#define RES_ADDRESS_IOAFP 0xFEFFFFFF
352#define RES_ADDRESS_INVALID 0xFFFFFFFF
353
354/* BUS/TARGET/LUN values from resource_addrr */
355#define RES_BUS(res_addr) (le32_to_cpu(res_addr) & 0xFF)
356#define RES_TARGET(res_addr) ((le32_to_cpu(res_addr) >> 16) & 0xFF)
357#define RES_LUN(res_addr) 0x0
358
359/* configuration table structure */
360struct pmcraid_config_table {
361 __le16 num_entries;
362 __u8 table_format;
363 __u8 reserved1;
364 __u8 flags;
365 __u8 reserved2[11];
366 union {
367 struct pmcraid_config_table_entry
368 entries[PMCRAID_MAX_RESOURCES];
369 struct pmcraid_config_table_entry_ext
370 entries_ext[PMCRAID_MAX_RESOURCES];
371 };
372} __attribute__((packed, aligned(4)));
373
374/* config_table.flags value */
375#define MICROCODE_UPDATE_REQUIRED PMC_BIT32(0)
376
377/*
378 * HCAM format
379 */
380#define PMCRAID_HOSTRCB_LDNSIZE 4056
381
382/* Error log notification format */
383struct pmcraid_hostrcb_error {
384 __le32 fd_ioasc;
385 __le32 fd_ra;
386 __le32 fd_rh;
387 __le32 prc;
388 union {
389 __u8 data[PMCRAID_HOSTRCB_LDNSIZE];
390 } u;
391} __attribute__ ((packed, aligned(4)));
392
393struct pmcraid_hcam_hdr {
394 __u8 op_code;
395 __u8 notification_type;
396 __u8 notification_lost;
397 __u8 flags;
398 __u8 overlay_id;
399 __u8 reserved1[3];
400 __le32 ilid;
401 __le32 timestamp1;
402 __le32 timestamp2;
403 __le32 data_len;
404} __attribute__((packed, aligned(4)));
405
406#define PMCRAID_AEN_GROUP 0x3
407
408struct pmcraid_hcam_ccn {
409 struct pmcraid_hcam_hdr header;
410 struct pmcraid_config_table_entry cfg_entry;
411 struct pmcraid_config_table_entry cfg_entry_old;
412} __attribute__((packed, aligned(4)));
413
414#define PMCRAID_CCN_EXT_SIZE 3944
415struct pmcraid_hcam_ccn_ext {
416 struct pmcraid_hcam_hdr header;
417 struct pmcraid_config_table_entry_ext cfg_entry;
418 struct pmcraid_config_table_entry_ext cfg_entry_old;
419 __u8 reserved[PMCRAID_CCN_EXT_SIZE];
420} __attribute__((packed, aligned(4)));
421
422struct pmcraid_hcam_ldn {
423 struct pmcraid_hcam_hdr header;
424 struct pmcraid_hostrcb_error error_log;
425} __attribute__((packed, aligned(4)));
426
427/* pmcraid_hcam.op_code values */
428#define HOSTRCB_TYPE_CCN 0xE1
429#define HOSTRCB_TYPE_LDN 0xE2
430
431/* pmcraid_hcam.notification_type values */
432#define NOTIFICATION_TYPE_ENTRY_CHANGED 0x0
433#define NOTIFICATION_TYPE_ENTRY_NEW 0x1
434#define NOTIFICATION_TYPE_ENTRY_DELETED 0x2
435#define NOTIFICATION_TYPE_STATE_CHANGE 0x3
436#define NOTIFICATION_TYPE_ENTRY_STATECHANGED 0x4
437#define NOTIFICATION_TYPE_ERROR_LOG 0x10
438#define NOTIFICATION_TYPE_INFORMATION_LOG 0x11
439
440#define HOSTRCB_NOTIFICATIONS_LOST PMC_BIT8(0)
441
442/* pmcraid_hcam.flags values */
443#define HOSTRCB_INTERNAL_OP_ERROR PMC_BIT8(0)
444#define HOSTRCB_ERROR_RESPONSE_SENT PMC_BIT8(1)
445
446/* pmcraid_hcam.overlay_id values */
447#define HOSTRCB_OVERLAY_ID_08 0x08
448#define HOSTRCB_OVERLAY_ID_09 0x09
449#define HOSTRCB_OVERLAY_ID_11 0x11
450#define HOSTRCB_OVERLAY_ID_12 0x12
451#define HOSTRCB_OVERLAY_ID_13 0x13
452#define HOSTRCB_OVERLAY_ID_14 0x14
453#define HOSTRCB_OVERLAY_ID_16 0x16
454#define HOSTRCB_OVERLAY_ID_17 0x17
455#define HOSTRCB_OVERLAY_ID_20 0x20
456#define HOSTRCB_OVERLAY_ID_FF 0xFF
457
458/* Implementation specific card details */
459struct pmcraid_chip_details {
460 /* hardware register offsets */
461 unsigned long ioastatus;
462 unsigned long ioarrin;
463 unsigned long mailbox;
464 unsigned long global_intr_mask;
465 unsigned long ioa_host_intr;
466 unsigned long ioa_host_msix_intr;
467 unsigned long ioa_host_intr_clr;
468 unsigned long ioa_host_mask;
469 unsigned long ioa_host_mask_clr;
470 unsigned long host_ioa_intr;
471 unsigned long host_ioa_intr_clr;
472
473 /* timeout used during transitional to operational state */
474 unsigned long transop_timeout;
475};
476
477/* IOA to HOST doorbells (interrupts) */
478#define INTRS_TRANSITION_TO_OPERATIONAL PMC_BIT32(0)
479#define INTRS_IOARCB_TRANSFER_FAILED PMC_BIT32(3)
480#define INTRS_IOA_UNIT_CHECK PMC_BIT32(4)
481#define INTRS_NO_HRRQ_FOR_CMD_RESPONSE PMC_BIT32(5)
482#define INTRS_CRITICAL_OP_IN_PROGRESS PMC_BIT32(6)
483#define INTRS_IO_DEBUG_ACK PMC_BIT32(7)
484#define INTRS_IOARRIN_LOST PMC_BIT32(27)
485#define INTRS_SYSTEM_BUS_MMIO_ERROR PMC_BIT32(28)
486#define INTRS_IOA_PROCESSOR_ERROR PMC_BIT32(29)
487#define INTRS_HRRQ_VALID PMC_BIT32(30)
488#define INTRS_OPERATIONAL_STATUS PMC_BIT32(0)
489#define INTRS_ALLOW_MSIX_VECTOR0 PMC_BIT32(31)
490
491/* Host to IOA Doorbells */
492#define DOORBELL_RUNTIME_RESET PMC_BIT32(1)
493#define DOORBELL_IOA_RESET_ALERT PMC_BIT32(7)
494#define DOORBELL_IOA_DEBUG_ALERT PMC_BIT32(9)
495#define DOORBELL_ENABLE_DESTRUCTIVE_DIAGS PMC_BIT32(8)
496#define DOORBELL_IOA_START_BIST PMC_BIT32(23)
497#define DOORBELL_INTR_MODE_MSIX PMC_BIT32(25)
498#define DOORBELL_INTR_MSIX_CLR PMC_BIT32(26)
499#define DOORBELL_RESET_IOA PMC_BIT32(31)
500
501/* Global interrupt mask register value */
502#define GLOBAL_INTERRUPT_MASK 0x5ULL
503
504#define PMCRAID_ERROR_INTERRUPTS (INTRS_IOARCB_TRANSFER_FAILED | \
505 INTRS_IOA_UNIT_CHECK | \
506 INTRS_NO_HRRQ_FOR_CMD_RESPONSE | \
507 INTRS_IOARRIN_LOST | \
508 INTRS_SYSTEM_BUS_MMIO_ERROR | \
509 INTRS_IOA_PROCESSOR_ERROR)
510
511#define PMCRAID_PCI_INTERRUPTS (PMCRAID_ERROR_INTERRUPTS | \
512 INTRS_HRRQ_VALID | \
513 INTRS_TRANSITION_TO_OPERATIONAL |\
514 INTRS_ALLOW_MSIX_VECTOR0)
515
516/* control_block, associated with each of the commands contains IOARCB, IOADLs
517 * memory for IOASA. Additional 3 * 16 bytes are allocated in order to support
518 * additional request parameters (of max size 48) any command.
519 */
520struct pmcraid_control_block {
521 struct pmcraid_ioarcb ioarcb;
522 struct pmcraid_ioadl_desc ioadl[PMCRAID_IOADLS_EXTERNAL + 3];
523 struct pmcraid_ioasa ioasa;
524} __attribute__ ((packed, aligned(PMCRAID_IOARCB_ALIGNMENT)));
525
526/* pmcraid_sglist - Scatter-gather list allocated for passthrough ioctls
527 */
528struct pmcraid_sglist {
529 u32 order;
530 u32 num_sg;
531 u32 num_dma_sg;
532 struct scatterlist *scatterlist;
533};
534
535/* page D0 inquiry data of focal point resource */
536struct pmcraid_inquiry_data {
537 __u8 ph_dev_type;
538 __u8 page_code;
539 __u8 reserved1;
540 __u8 add_page_len;
541 __u8 length;
542 __u8 reserved2;
543 __be16 fw_version;
544 __u8 reserved3[16];
545};
546
547#define PMCRAID_TIMESTAMP_LEN 12
548#define PMCRAID_REQ_TM_STR_LEN 6
549#define PMCRAID_SCSI_SET_TIMESTAMP 0xA4
550#define PMCRAID_SCSI_SERVICE_ACTION 0x0F
551
552struct pmcraid_timestamp_data {
553 __u8 reserved1[4];
554 __u8 timestamp[PMCRAID_REQ_TM_STR_LEN]; /* current time value */
555 __u8 reserved2[2];
556};
557
558/* pmcraid_cmd - LLD representation of SCSI command */
559struct pmcraid_cmd {
560
561 /* Ptr and bus address of DMA.able control block for this command */
562 struct pmcraid_control_block *ioa_cb;
563 dma_addr_t ioa_cb_bus_addr;
564 dma_addr_t dma_handle;
565
566 /* pointer to mid layer structure of SCSI commands */
567 struct scsi_cmnd *scsi_cmd;
568
569 struct list_head free_list;
570 struct completion wait_for_completion;
571 struct timer_list timer; /* needed for internal commands */
572 u32 timeout; /* current timeout value */
573 u32 index; /* index into the command list */
574 u8 completion_req; /* for handling internal commands */
575 u8 release; /* for handling completions */
576
577 void (*cmd_done) (struct pmcraid_cmd *);
578 struct pmcraid_instance *drv_inst;
579
580 struct pmcraid_sglist *sglist; /* used for passthrough IOCTLs */
581
582 /* scratch used */
583 union {
584 /* during reset sequence */
585 unsigned long time_left;
586 struct pmcraid_resource_entry *res;
587 int hrrq_index;
588
589 /* used during IO command error handling. Sense buffer
590 * for REQUEST SENSE command if firmware is not sending
591 * auto sense data
592 */
593 struct {
594 u8 *sense_buffer;
595 dma_addr_t sense_buffer_dma;
596 };
597 };
598};
599
600/*
601 * Interrupt registers of IOA
602 */
603struct pmcraid_interrupts {
604 void __iomem *ioa_host_interrupt_reg;
605 void __iomem *ioa_host_msix_interrupt_reg;
606 void __iomem *ioa_host_interrupt_clr_reg;
607 void __iomem *ioa_host_interrupt_mask_reg;
608 void __iomem *ioa_host_interrupt_mask_clr_reg;
609 void __iomem *global_interrupt_mask_reg;
610 void __iomem *host_ioa_interrupt_reg;
611 void __iomem *host_ioa_interrupt_clr_reg;
612};
613
614/* ISR parameters LLD allocates (one for each MSI-X if enabled) vectors */
615struct pmcraid_isr_param {
616 struct pmcraid_instance *drv_inst;
617 u8 hrrq_id; /* hrrq entry index */
618};
619
620
621/* AEN message header sent as part of event data to applications */
622struct pmcraid_aen_msg {
623 u32 hostno;
624 u32 length;
625 u8 reserved[8];
626 u8 data[];
627};
628
629/* Controller state event message type */
630struct pmcraid_state_msg {
631 struct pmcraid_aen_msg msg;
632 u32 ioa_state;
633};
634
635#define PMC_DEVICE_EVENT_RESET_START 0x11000000
636#define PMC_DEVICE_EVENT_RESET_SUCCESS 0x11000001
637#define PMC_DEVICE_EVENT_RESET_FAILED 0x11000002
638#define PMC_DEVICE_EVENT_SHUTDOWN_START 0x11000003
639#define PMC_DEVICE_EVENT_SHUTDOWN_SUCCESS 0x11000004
640#define PMC_DEVICE_EVENT_SHUTDOWN_FAILED 0x11000005
641
642struct pmcraid_hostrcb {
643 struct pmcraid_instance *drv_inst;
644 struct pmcraid_aen_msg *msg;
645 struct pmcraid_hcam_hdr *hcam; /* pointer to hcam buffer */
646 struct pmcraid_cmd *cmd; /* pointer to command block used */
647 dma_addr_t baddr; /* system address of hcam buffer */
648 atomic_t ignore; /* process HCAM response ? */
649};
650
651#define PMCRAID_AEN_HDR_SIZE sizeof(struct pmcraid_aen_msg)
652
653
654
655/*
656 * Per adapter structure maintained by LLD
657 */
658struct pmcraid_instance {
659 /* Array of allowed-to-be-exposed resources, initialized from
660 * Configuration Table, later updated with CCNs
661 */
662 struct pmcraid_resource_entry *res_entries;
663
664 struct list_head free_res_q; /* res_entries lists for easy lookup */
665 struct list_head used_res_q; /* List of to be exposed resources */
666 spinlock_t resource_lock; /* spinlock to protect resource list */
667
668 void __iomem *mapped_dma_addr;
669 void __iomem *ioa_status; /* Iomapped IOA status register */
670 void __iomem *mailbox; /* Iomapped mailbox register */
671 void __iomem *ioarrin; /* IOmapped IOARR IN register */
672
673 struct pmcraid_interrupts int_regs;
674 struct pmcraid_chip_details *chip_cfg;
675
676 /* HostRCBs needed for HCAM */
677 struct pmcraid_hostrcb ldn;
678 struct pmcraid_hostrcb ccn;
679 struct pmcraid_state_msg scn; /* controller state change msg */
680
681
682 /* Bus address of start of HRRQ */
683 dma_addr_t hrrq_start_bus_addr[PMCRAID_NUM_MSIX_VECTORS];
684
685 /* Pointer to 1st entry of HRRQ */
686 __le32 *hrrq_start[PMCRAID_NUM_MSIX_VECTORS];
687
688 /* Pointer to last entry of HRRQ */
689 __le32 *hrrq_end[PMCRAID_NUM_MSIX_VECTORS];
690
691 /* Pointer to current pointer of hrrq */
692 __le32 *hrrq_curr[PMCRAID_NUM_MSIX_VECTORS];
693
694 /* Lock for HRRQ access */
695 spinlock_t hrrq_lock[PMCRAID_NUM_MSIX_VECTORS];
696
697 struct pmcraid_inquiry_data *inq_data;
698 dma_addr_t inq_data_baddr;
699
700 struct pmcraid_timestamp_data *timestamp_data;
701 dma_addr_t timestamp_data_baddr;
702
703 /* size of configuration table entry, varies based on the firmware */
704 u32 config_table_entry_size;
705
706 /* Expected toggle bit at host */
707 u8 host_toggle_bit[PMCRAID_NUM_MSIX_VECTORS];
708
709
710 /* Wait Q for threads to wait for Reset IOA completion */
711 wait_queue_head_t reset_wait_q;
712 struct pmcraid_cmd *reset_cmd;
713
714 /* structures for supporting SIGIO based AEN. */
715 struct fasync_struct *aen_queue;
716 struct mutex aen_queue_lock; /* lock for aen subscribers list */
717 struct cdev cdev;
718
719 struct Scsi_Host *host; /* mid layer interface structure handle */
720 struct pci_dev *pdev; /* PCI device structure handle */
721
722 /* No of Reset IOA retries . IOA marked dead if threshold exceeds */
723 u8 ioa_reset_attempts;
724#define PMCRAID_RESET_ATTEMPTS 3
725
726 u8 current_log_level; /* default level for logging IOASC errors */
727
728 u8 num_hrrq; /* Number of interrupt vectors allocated */
729 u8 interrupt_mode; /* current interrupt mode legacy or msix */
730 dev_t dev; /* Major-Minor numbers for Char device */
731
732 /* Used as ISR handler argument */
733 struct pmcraid_isr_param hrrq_vector[PMCRAID_NUM_MSIX_VECTORS];
734
735 /* Message id as filled in last fired IOARCB, used to identify HRRQ */
736 atomic_t last_message_id;
737
738 /* configuration table */
739 struct pmcraid_config_table *cfg_table;
740 dma_addr_t cfg_table_bus_addr;
741
742 /* structures related to command blocks */
743 struct kmem_cache *cmd_cachep; /* cache for cmd blocks */
744 struct dma_pool *control_pool; /* pool for control blocks */
745 char cmd_pool_name[64]; /* name of cmd cache */
746 char ctl_pool_name[64]; /* name of control cache */
747
748 struct pmcraid_cmd *cmd_list[PMCRAID_MAX_CMD];
749
750 struct list_head free_cmd_pool;
751 struct list_head pending_cmd_pool;
752 spinlock_t free_pool_lock; /* free pool lock */
753 spinlock_t pending_pool_lock; /* pending pool lock */
754
755 /* Tasklet to handle deferred processing */
756 struct tasklet_struct isr_tasklet[PMCRAID_NUM_MSIX_VECTORS];
757
758 /* Work-queue (Shared) for deferred reset processing */
759 struct work_struct worker_q;
760
761 /* No of IO commands pending with FW */
762 atomic_t outstanding_cmds;
763
764 /* should add/delete resources to mid-layer now ?*/
765 atomic_t expose_resources;
766
767
768
769 u32 ioa_state:4; /* For IOA Reset sequence FSM */
770#define IOA_STATE_OPERATIONAL 0x0
771#define IOA_STATE_UNKNOWN 0x1
772#define IOA_STATE_DEAD 0x2
773#define IOA_STATE_IN_SOFT_RESET 0x3
774#define IOA_STATE_IN_HARD_RESET 0x4
775#define IOA_STATE_IN_RESET_ALERT 0x5
776#define IOA_STATE_IN_BRINGDOWN 0x6
777#define IOA_STATE_IN_BRINGUP 0x7
778
779 u32 ioa_reset_in_progress:1; /* true if IOA reset is in progress */
780 u32 ioa_hard_reset:1; /* TRUE if Hard Reset is needed */
781 u32 ioa_unit_check:1; /* Indicates Unit Check condition */
782 u32 ioa_bringdown:1; /* whether IOA needs to be brought down */
783 u32 force_ioa_reset:1; /* force adapter reset ? */
784 u32 reinit_cfg_table:1; /* reinit config table due to lost CCN */
785 u32 ioa_shutdown_type:2;/* shutdown type used during reset */
786#define SHUTDOWN_NONE 0x0
787#define SHUTDOWN_NORMAL 0x1
788#define SHUTDOWN_ABBREV 0x2
789 u32 timestamp_error:1; /* indicate set timestamp for out of sync */
790
791};
792
793/* LLD maintained resource entry structure */
794struct pmcraid_resource_entry {
795 struct list_head queue; /* link to "to be exposed" resources */
796 union {
797 struct pmcraid_config_table_entry cfg_entry;
798 struct pmcraid_config_table_entry_ext cfg_entry_ext;
799 };
800 struct scsi_device *scsi_dev; /* Link scsi_device structure */
801 atomic_t read_failures; /* count of failed READ commands */
802 atomic_t write_failures; /* count of failed WRITE commands */
803
804 /* To indicate add/delete/modify during CCN */
805 u8 change_detected;
806#define RES_CHANGE_ADD 0x1 /* add this to mid-layer */
807#define RES_CHANGE_DEL 0x2 /* remove this from mid-layer */
808
809 u8 reset_progress; /* Device is resetting */
810
811 /*
812 * When IOA asks for sync (i.e. IOASC = Not Ready, Sync Required), this
813 * flag will be set, mid layer will be asked to retry. In the next
814 * attempt, this flag will be checked in queuecommand() to set
815 * SYNC_COMPLETE flag in IOARCB (flag_0).
816 */
817 u8 sync_reqd;
818
819 /* target indicates the mapped target_id assigned to this resource if
820 * this is VSET resource. For non-VSET resources this will be un-used
821 * or zero
822 */
823 u8 target;
824};
825
826/* Data structures used in IOASC error code logging */
827struct pmcraid_ioasc_error {
828 u32 ioasc_code; /* IOASC code */
829 u8 log_level; /* default log level assignment. */
830 char *error_string;
831};
832
833/* Initial log_level assignments for various IOASCs */
834#define IOASC_LOG_LEVEL_NONE 0x0 /* no logging */
835#define IOASC_LOG_LEVEL_MUST 0x1 /* must log: all high-severity errors */
836#define IOASC_LOG_LEVEL_HARD 0x2 /* optional – low severity errors */
837
838/* Error information maintained by LLD. LLD initializes the pmcraid_error_table
839 * statically.
840 */
841static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = {
842 {0x01180600, IOASC_LOG_LEVEL_HARD,
843 "Recovered Error, soft media error, sector reassignment suggested"},
844 {0x015D0000, IOASC_LOG_LEVEL_HARD,
845 "Recovered Error, failure prediction threshold exceeded"},
846 {0x015D9200, IOASC_LOG_LEVEL_HARD,
847 "Recovered Error, soft Cache Card Battery error threshold"},
848 {0x015D9200, IOASC_LOG_LEVEL_HARD,
849 "Recovered Error, soft Cache Card Battery error threshold"},
850 {0x02048000, IOASC_LOG_LEVEL_HARD,
851 "Not Ready, IOA Reset Required"},
852 {0x02408500, IOASC_LOG_LEVEL_HARD,
853 "Not Ready, IOA microcode download required"},
854 {0x03110B00, IOASC_LOG_LEVEL_HARD,
855 "Medium Error, data unreadable, reassignment suggested"},
856 {0x03110C00, IOASC_LOG_LEVEL_MUST,
857 "Medium Error, data unreadable do not reassign"},
858 {0x03310000, IOASC_LOG_LEVEL_HARD,
859 "Medium Error, media corrupted"},
860 {0x04050000, IOASC_LOG_LEVEL_HARD,
861 "Hardware Error, IOA can't communicate with device"},
862 {0x04080000, IOASC_LOG_LEVEL_MUST,
863 "Hardware Error, device bus error"},
864 {0x04088000, IOASC_LOG_LEVEL_MUST,
865 "Hardware Error, device bus is not functioning"},
866 {0x04118000, IOASC_LOG_LEVEL_HARD,
867 "Hardware Error, IOA reserved area data check"},
868 {0x04118100, IOASC_LOG_LEVEL_HARD,
869 "Hardware Error, IOA reserved area invalid data pattern"},
870 {0x04118200, IOASC_LOG_LEVEL_HARD,
871 "Hardware Error, IOA reserved area LRC error"},
872 {0x04320000, IOASC_LOG_LEVEL_HARD,
873 "Hardware Error, reassignment space exhausted"},
874 {0x04330000, IOASC_LOG_LEVEL_HARD,
875 "Hardware Error, data transfer underlength error"},
876 {0x04330000, IOASC_LOG_LEVEL_HARD,
877 "Hardware Error, data transfer overlength error"},
878 {0x04418000, IOASC_LOG_LEVEL_MUST,
879 "Hardware Error, PCI bus error"},
880 {0x04440000, IOASC_LOG_LEVEL_HARD,
881 "Hardware Error, device error"},
882 {0x04448200, IOASC_LOG_LEVEL_MUST,
883 "Hardware Error, IOA error"},
884 {0x04448300, IOASC_LOG_LEVEL_HARD,
885 "Hardware Error, undefined device response"},
886 {0x04448400, IOASC_LOG_LEVEL_HARD,
887 "Hardware Error, IOA microcode error"},
888 {0x04448600, IOASC_LOG_LEVEL_HARD,
889 "Hardware Error, IOA reset required"},
890 {0x04449200, IOASC_LOG_LEVEL_HARD,
891 "Hardware Error, hard Cache Fearuee Card Battery error"},
892 {0x0444A000, IOASC_LOG_LEVEL_HARD,
893 "Hardware Error, failed device altered"},
894 {0x0444A200, IOASC_LOG_LEVEL_HARD,
895 "Hardware Error, data check after reassignment"},
896 {0x0444A300, IOASC_LOG_LEVEL_HARD,
897 "Hardware Error, LRC error after reassignment"},
898 {0x044A0000, IOASC_LOG_LEVEL_HARD,
899 "Hardware Error, device bus error (msg/cmd phase)"},
900 {0x04670400, IOASC_LOG_LEVEL_HARD,
901 "Hardware Error, new device can't be used"},
902 {0x04678000, IOASC_LOG_LEVEL_HARD,
903 "Hardware Error, invalid multiadapter configuration"},
904 {0x04678100, IOASC_LOG_LEVEL_HARD,
905 "Hardware Error, incorrect connection between enclosures"},
906 {0x04678200, IOASC_LOG_LEVEL_HARD,
907 "Hardware Error, connections exceed IOA design limits"},
908 {0x04678300, IOASC_LOG_LEVEL_HARD,
909 "Hardware Error, incorrect multipath connection"},
910 {0x04679000, IOASC_LOG_LEVEL_HARD,
911 "Hardware Error, command to LUN failed"},
912 {0x064C8000, IOASC_LOG_LEVEL_HARD,
913 "Unit Attention, cache exists for missing/failed device"},
914 {0x06670100, IOASC_LOG_LEVEL_HARD,
915 "Unit Attention, incompatible exposed mode device"},
916 {0x06670600, IOASC_LOG_LEVEL_HARD,
917 "Unit Attention, attachment of logical unit failed"},
918 {0x06678000, IOASC_LOG_LEVEL_HARD,
919 "Unit Attention, cables exceed connective design limit"},
920 {0x06678300, IOASC_LOG_LEVEL_HARD,
921 "Unit Attention, incomplete multipath connection between" \
922 "IOA and enclosure"},
923 {0x06678400, IOASC_LOG_LEVEL_HARD,
924 "Unit Attention, incomplete multipath connection between" \
925 "device and enclosure"},
926 {0x06678500, IOASC_LOG_LEVEL_HARD,
927 "Unit Attention, incomplete multipath connection between" \
928 "IOA and remote IOA"},
929 {0x06678600, IOASC_LOG_LEVEL_HARD,
930 "Unit Attention, missing remote IOA"},
931 {0x06679100, IOASC_LOG_LEVEL_HARD,
932 "Unit Attention, enclosure doesn't support required multipath" \
933 "function"},
934 {0x06698200, IOASC_LOG_LEVEL_HARD,
935 "Unit Attention, corrupt array parity detected on device"},
936 {0x066B0200, IOASC_LOG_LEVEL_HARD,
937 "Unit Attention, array exposed"},
938 {0x066B8200, IOASC_LOG_LEVEL_HARD,
939 "Unit Attention, exposed array is still protected"},
940 {0x066B9200, IOASC_LOG_LEVEL_HARD,
941 "Unit Attention, Multipath redundancy level got worse"},
942 {0x07270000, IOASC_LOG_LEVEL_HARD,
943 "Data Protect, device is read/write protected by IOA"},
944 {0x07278000, IOASC_LOG_LEVEL_HARD,
945 "Data Protect, IOA doesn't support device attribute"},
946 {0x07278100, IOASC_LOG_LEVEL_HARD,
947 "Data Protect, NVRAM mirroring prohibited"},
948 {0x07278400, IOASC_LOG_LEVEL_HARD,
949 "Data Protect, array is short 2 or more devices"},
950 {0x07278600, IOASC_LOG_LEVEL_HARD,
951 "Data Protect, exposed array is short a required device"},
952 {0x07278700, IOASC_LOG_LEVEL_HARD,
953 "Data Protect, array members not at required addresses"},
954 {0x07278800, IOASC_LOG_LEVEL_HARD,
955 "Data Protect, exposed mode device resource address conflict"},
956 {0x07278900, IOASC_LOG_LEVEL_HARD,
957 "Data Protect, incorrect resource address of exposed mode device"},
958 {0x07278A00, IOASC_LOG_LEVEL_HARD,
959 "Data Protect, Array is missing a device and parity is out of sync"},
960 {0x07278B00, IOASC_LOG_LEVEL_HARD,
961 "Data Protect, maximum number of arrays already exist"},
962 {0x07278C00, IOASC_LOG_LEVEL_HARD,
963 "Data Protect, cannot locate cache data for device"},
964 {0x07278D00, IOASC_LOG_LEVEL_HARD,
965 "Data Protect, cache data exits for a changed device"},
966 {0x07279100, IOASC_LOG_LEVEL_HARD,
967 "Data Protect, detection of a device requiring format"},
968 {0x07279200, IOASC_LOG_LEVEL_HARD,
969 "Data Protect, IOA exceeds maximum number of devices"},
970 {0x07279600, IOASC_LOG_LEVEL_HARD,
971 "Data Protect, missing array, volume set is not functional"},
972 {0x07279700, IOASC_LOG_LEVEL_HARD,
973 "Data Protect, single device for a volume set"},
974 {0x07279800, IOASC_LOG_LEVEL_HARD,
975 "Data Protect, missing multiple devices for a volume set"},
976 {0x07279900, IOASC_LOG_LEVEL_HARD,
977 "Data Protect, maximum number of volument sets already exists"},
978 {0x07279A00, IOASC_LOG_LEVEL_HARD,
979 "Data Protect, other volume set problem"},
980};
981
982/* macros to help in debugging */
983#define pmcraid_err(...) \
984 printk(KERN_ERR "MaxRAID: "__VA_ARGS__)
985
986#define pmcraid_info(...) \
987 if (pmcraid_debug_log) \
988 printk(KERN_INFO "MaxRAID: "__VA_ARGS__)
989
990/* check if given command is a SCSI READ or SCSI WRITE command */
991#define SCSI_READ_CMD 0x1 /* any of SCSI READ commands */
992#define SCSI_WRITE_CMD 0x2 /* any of SCSI WRITE commands */
993#define SCSI_CMD_TYPE(opcode) \
994({ u8 op = opcode; u8 __type = 0;\
995 if (op == READ_6 || op == READ_10 || op == READ_12 || op == READ_16)\
996 __type = SCSI_READ_CMD;\
997 else if (op == WRITE_6 || op == WRITE_10 || op == WRITE_12 || \
998 op == WRITE_16)\
999 __type = SCSI_WRITE_CMD;\
1000 __type;\
1001})
1002
1003#define IS_SCSI_READ_WRITE(opcode) \
1004({ u8 __type = SCSI_CMD_TYPE(opcode); \
1005 (__type == SCSI_READ_CMD || __type == SCSI_WRITE_CMD) ? 1 : 0;\
1006})
1007
1008
1009/*
1010 * pmcraid_ioctl_header - definition of header structure that precedes all the
1011 * buffers given as ioctl arguments.
1012 *
1013 * .signature : always ASCII string, "PMCRAID"
1014 * .reserved : not used
1015 * .buffer_length : length of the buffer following the header
1016 */
1017struct pmcraid_ioctl_header {
1018 u8 signature[8];
1019 u32 reserved;
1020 u32 buffer_length;
1021};
1022
1023#define PMCRAID_IOCTL_SIGNATURE "PMCRAID"
1024
1025/*
1026 * keys to differentiate between driver handled IOCTLs and passthrough
1027 * IOCTLs passed to IOA. driver determines the ioctl type using macro
1028 * _IOC_TYPE
1029 */
1030#define PMCRAID_DRIVER_IOCTL 'D'
1031
1032#define DRV_IOCTL(n, size) \
1033 _IOC(_IOC_READ|_IOC_WRITE, PMCRAID_DRIVER_IOCTL, (n), (size))
1034
1035/*
1036 * _ARGSIZE: macro that gives size of the argument type passed to an IOCTL cmd.
1037 * This is to facilitate applications avoiding un-necessary memory allocations.
1038 * For example, most of driver handled ioctls do not require ioarcb, ioasa.
1039 */
1040#define _ARGSIZE(arg) (sizeof(struct pmcraid_ioctl_header) + sizeof(arg))
1041
1042/* Driver handled IOCTL command definitions */
1043
1044#define PMCRAID_IOCTL_RESET_ADAPTER \
1045 DRV_IOCTL(5, sizeof(struct pmcraid_ioctl_header))
1046
1047#endif /* _PMCRAID_H */