projects/linux·blob master · refs

147 lines · 4.9 KiB

1/* SPDX-License-Identifier: GPL-2.0 */
2/* Driver for the PPA3 parallel port SCSI HBA embedded in
3 * the Iomega ZIP drive
4 *
5 * (c) 1996 Grant R. Guenther [email protected]
6 * David Campbell
7 *
8 * All comments to David.
9 */
10
11#ifndef _PPA_H
12#define _PPA_H
13
14#define PPA_VERSION "2.07 (for Linux 2.4.x)"
15
16/*
17 * this driver has been hacked by Matteo Frigo ([email protected])
18 * to support EPP and scatter-gather. [0.26-athena]
19 *
20 * additional hacks by David Campbell
21 * in response to this driver "mis-behaving" on his machine.
22 * Fixed EPP to handle "software" changing of EPP port data direction.
23 * Chased down EPP timeouts
24 * Made this driver "kernel version friendly" [0.28-athena]
25 *
26 * [ Stuff removed ]
27 *
28 * Corrected ppa.h for 2.1.x kernels (>=2.1.85)
29 * Modified "Nat Semi Kludge" for extended chipsets
30 * [1.41]
31 *
32 * Fixed id_probe for EPP 1.9 chipsets (misdetected as EPP 1.7)
33 * [1.42]
34 *
35 * Development solely for 2.1.x kernels from now on!
36 * [2.00]
37 *
38 * Hack and slash at the init code (EPP device check routine)
39 * Added INSANE option.
40 * [2.01]
41 *
42 * Patch applied to sync against the 2.1.x kernel code
43 * Included qboot_zip.sh
44 * [2.02]
45 *
46 * Cleaned up the mess left by someone else trying to fix the
47 * asm section to keep egcc happy. The asm section no longer
48 * exists, the nibble code is *almost* as fast as the asm code
49 * providing it is compiled with egcc.
50 *
51 * Other clean ups include the follow changes:
52 * CONFIG_SCSI_PPA_HAVE_PEDANTIC => CONFIG_SCSI_IZIP_EPP16
53 * added CONFIG_SCSI_IZIP_SLOW_CTR option
54 * [2.03]
55 *
56 * Use ppa_wait() to check for ready AND connected status bits
57 * Add ppa_wait() calls to ppa_completion()
58 * by Peter Cherriman <[email protected]> and
59 * Tim Waugh <[email protected]>
60 * [2.04]
61 *
62 * Fix kernel panic on scsi timeout, 2000-08-18 [2.05]
63 *
64 * Avoid io_request_lock problems.
65 * John Cavan <[email protected]> [2.06]
66 *
67 * Busy wait for connected status bit in ppa_completion()
68 * in order to cope with some hardware that has this bit low
69 * for short periods of time.
70 * Add udelay() to ppa_select()
71 * by Peter Cherriman <[email protected]> and
72 * Oleg Makarenko <[email protected]>
73 * [2.07]
74 */
75/* ------ END OF USER CONFIGURABLE PARAMETERS ----- */
76
77#include <linux/stddef.h>
78#include <linux/module.h>
79#include <linux/kernel.h>
80#include <linux/ioport.h>
81#include <linux/delay.h>
82#include <linux/proc_fs.h>
83#include <linux/stat.h>
84#include <linux/blkdev.h>
85#include <linux/sched.h>
86#include <linux/interrupt.h>
87
88#include <asm/io.h>
89#include <scsi/scsi_host.h>
90/* batteries not included :-) */
91
92/*
93 * modes in which the driver can operate
94 */
95#define PPA_AUTODETECT 0 /* Autodetect mode */
96#define PPA_NIBBLE 1 /* work in standard 4 bit mode */
97#define PPA_PS2 2 /* PS/2 byte mode */
98#define PPA_EPP_8 3 /* EPP mode, 8 bit */
99#define PPA_EPP_16 4 /* EPP mode, 16 bit */
100#define PPA_EPP_32 5 /* EPP mode, 32 bit */
101#define PPA_UNKNOWN 6 /* Just in case... */
102
103static char *PPA_MODE_STRING[] =
104{
105 "Autodetect",
106 "SPP",
107 "PS/2",
108 "EPP 8 bit",
109 "EPP 16 bit",
110 "EPP 32 bit",
111 "Unknown"};
112
113/* other options */
114#define PPA_BURST_SIZE 512 /* data burst size */
115#define PPA_SELECT_TMO 5000 /* how long to wait for target ? */
116#define PPA_SPIN_TMO 50000 /* ppa_wait loop limiter */
117#define PPA_RECON_TMO 500 /* scsi reconnection loop limiter */
118#define PPA_DEBUG 0 /* debugging option */
119#define IN_EPP_MODE(x) (x == PPA_EPP_8 || x == PPA_EPP_16 || x == PPA_EPP_32)
120
121/* args to ppa_connect */
122#define CONNECT_EPP_MAYBE 1
123#define CONNECT_NORMAL 0
124
125#define r_dtr(x) (unsigned char)inb((x))
126#define r_str(x) (unsigned char)inb((x)+1)
127#define r_ctr(x) (unsigned char)inb((x)+2)
128#define r_epp(x) (unsigned char)inb((x)+4)
129#define r_fifo(x) (unsigned char)inb((x)) /* x must be base_hi */
130 /* On PCI is base+0x400 != base_hi */
131#define r_ecr(x) (unsigned char)inb((x)+0x2) /* x must be base_hi */
132
133#define w_dtr(x,y) outb(y, (x))
134#define w_str(x,y) outb(y, (x)+1)
135#define w_epp(x,y) outb(y, (x)+4)
136#define w_fifo(x,y) outb(y, (x)) /* x must be base_hi */
137#define w_ecr(x,y) outb(y, (x)+0x2)/* x must be base_hi */
138
139#ifdef CONFIG_SCSI_IZIP_SLOW_CTR
140#define w_ctr(x,y) outb_p(y, (x)+2)
141#else
142#define w_ctr(x,y) outb(y, (x)+2)
143#endif
144
145static int ppa_engine(ppa_struct *, struct scsi_cmnd *);
146
147#endif /* _PPA_H */