| 1 | |
| 2 | |
| 3 | * host.c - DesignWare USB3 DRD Controller Host Glue
|
| 4 | *
|
| 5 | * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com
|
| 6 | *
|
| 7 | * Authors: Felipe Balbi <[email protected]>,
|
| 8 |
|
| 9 |
|
| 10 | #include <linux/irq.h>
|
| 11 | #include <linux/of.h>
|
| 12 | #include <linux/platform_device.h>
|
| 13 | #include <linux/usb.h>
|
| 14 | #include <linux/usb/hcd.h>
|
| 15 | #include <linux/bitfield.h>
|
| 16 |
|
| 17 | #include "../host/xhci-port.h"
|
| 18 | #include "../host/xhci-ext-caps.h"
|
| 19 | #include "../host/xhci-caps.h"
|
| 20 | #include "../host/xhci-plat.h"
|
| 21 | #include "core.h"
|
| 22 |
|
| 23 | #define XHCI_HCSPARAMS1 0x4
|
| 24 | #define XHCI_PORTSC_BASE 0x400
|
| 25 |
|
| 26 | |
| 27 | * dwc3_power_off_all_roothub_ports - Power off all Root hub ports
|
| 28 | * @dwc: Pointer to our controller context structure
|
| 29 |
|
| 30 | static void dwc3_power_off_all_roothub_ports(struct dwc3 *dwc)
|
| 31 | {
|
| 32 | void __iomem *xhci_regs;
|
| 33 | u32 op_regs_base;
|
| 34 | int port_num;
|
| 35 | u32 offset;
|
| 36 | u32 reg;
|
| 37 | int i;
|
| 38 |
|
| 39 |
|
| 40 | if (dwc->xhci_resources[0].start) {
|
| 41 | if (dwc->xhci_resources[0].flags & IORESOURCE_MEM_NONPOSTED)
|
| 42 | xhci_regs = ioremap_np(dwc->xhci_resources[0].start, DWC3_XHCI_REGS_END);
|
| 43 | else
|
| 44 | xhci_regs = ioremap(dwc->xhci_resources[0].start, DWC3_XHCI_REGS_END);
|
| 45 | if (!xhci_regs) {
|
| 46 | dev_err(dwc->dev, "Failed to ioremap xhci_regs\n");
|
| 47 | return;
|
| 48 | }
|
| 49 |
|
| 50 | op_regs_base = FIELD_GET(HC_LENGTH, readl(xhci_regs));
|
| 51 | reg = readl(xhci_regs + XHCI_HCSPARAMS1);
|
| 52 | port_num = FIELD_GET(HCS_MAX_PORTS, reg);
|
| 53 |
|
| 54 | for (i = 1; i <= port_num; i++) {
|
| 55 | offset = op_regs_base + XHCI_PORTSC_BASE + 0x10 * (i - 1);
|
| 56 | reg = readl(xhci_regs + offset);
|
| 57 | reg &= ~PORT_POWER;
|
| 58 | writel(reg, xhci_regs + offset);
|
| 59 | }
|
| 60 |
|
| 61 | iounmap(xhci_regs);
|
| 62 | } else {
|
| 63 | dev_err(dwc->dev, "xhci base reg invalid\n");
|
| 64 | }
|
| 65 | }
|
| 66 |
|
| 67 | static void dwc3_xhci_plat_start(struct usb_hcd *hcd)
|
| 68 | {
|
| 69 | struct platform_device *pdev;
|
| 70 | struct dwc3 *dwc;
|
| 71 |
|
| 72 | if (!usb_hcd_is_primary_hcd(hcd))
|
| 73 | return;
|
| 74 |
|
| 75 | pdev = to_platform_device(hcd->self.controller);
|
| 76 | dwc = dev_get_drvdata(pdev->dev.parent);
|
| 77 |
|
| 78 | dwc3_enable_susphy(dwc, true);
|
| 79 | }
|
| 80 |
|
| 81 | static const struct xhci_plat_priv dwc3_xhci_plat_quirk = {
|
| 82 | .plat_start = dwc3_xhci_plat_start,
|
| 83 | };
|
| 84 |
|
| 85 | static void dwc3_host_fill_xhci_irq_res(struct dwc3 *dwc,
|
| 86 | int irq, char *name)
|
| 87 | {
|
| 88 | struct platform_device *pdev = to_platform_device(dwc->dev);
|
| 89 | struct device_node *np = dev_of_node(&pdev->dev);
|
| 90 |
|
| 91 | dwc->xhci_resources[1].start = irq;
|
| 92 | dwc->xhci_resources[1].end = irq;
|
| 93 | dwc->xhci_resources[1].flags = IORESOURCE_IRQ | irq_get_trigger_type(irq);
|
| 94 | if (!name && np)
|
| 95 | dwc->xhci_resources[1].name = of_node_full_name(pdev->dev.of_node);
|
| 96 | else
|
| 97 | dwc->xhci_resources[1].name = name;
|
| 98 | }
|
| 99 |
|
| 100 | static int dwc3_host_get_irq(struct dwc3 *dwc)
|
| 101 | {
|
| 102 | struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
|
| 103 | int irq;
|
| 104 |
|
| 105 | irq = platform_get_irq_byname_optional(dwc3_pdev, "host");
|
| 106 | if (irq > 0) {
|
| 107 | dwc3_host_fill_xhci_irq_res(dwc, irq, "host");
|
| 108 | goto out;
|
| 109 | }
|
| 110 |
|
| 111 | if (irq == -EPROBE_DEFER)
|
| 112 | goto out;
|
| 113 |
|
| 114 | irq = platform_get_irq_byname_optional(dwc3_pdev, "dwc_usb3");
|
| 115 | if (irq > 0) {
|
| 116 | dwc3_host_fill_xhci_irq_res(dwc, irq, "dwc_usb3");
|
| 117 | goto out;
|
| 118 | }
|
| 119 |
|
| 120 | if (irq == -EPROBE_DEFER)
|
| 121 | goto out;
|
| 122 |
|
| 123 | irq = platform_get_irq(dwc3_pdev, 0);
|
| 124 | if (irq > 0)
|
| 125 | dwc3_host_fill_xhci_irq_res(dwc, irq, NULL);
|
| 126 |
|
| 127 | out:
|
| 128 | return irq;
|
| 129 | }
|
| 130 |
|
| 131 | int dwc3_host_init(struct dwc3 *dwc)
|
| 132 | {
|
| 133 | struct property_entry props[6];
|
| 134 | struct platform_device *xhci;
|
| 135 | int ret, irq;
|
| 136 | int prop_idx = 0;
|
| 137 |
|
| 138 | |
| 139 | * Some platforms need to power off all Root hub ports immediately after DWC3 set to host
|
| 140 | * mode to avoid VBUS glitch happen when xhci get reset later.
|
| 141 |
|
| 142 | dwc3_power_off_all_roothub_ports(dwc);
|
| 143 |
|
| 144 | irq = dwc3_host_get_irq(dwc);
|
| 145 | if (irq < 0)
|
| 146 | return irq;
|
| 147 |
|
| 148 | xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
|
| 149 | if (!xhci) {
|
| 150 | dev_err(dwc->dev, "couldn't allocate xHCI device\n");
|
| 151 | return -ENOMEM;
|
| 152 | }
|
| 153 |
|
| 154 | xhci->dev.parent = dwc->dev;
|
| 155 |
|
| 156 | dwc->xhci = xhci;
|
| 157 |
|
| 158 | ret = platform_device_add_resources(xhci, dwc->xhci_resources,
|
| 159 | DWC3_XHCI_RESOURCES_NUM);
|
| 160 | if (ret) {
|
| 161 | dev_err(dwc->dev, "couldn't add resources to xHCI device\n");
|
| 162 | goto err;
|
| 163 | }
|
| 164 |
|
| 165 | memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
|
| 166 |
|
| 167 | props[prop_idx++] = PROPERTY_ENTRY_BOOL("xhci-sg-trb-cache-size-quirk");
|
| 168 |
|
| 169 | props[prop_idx++] = PROPERTY_ENTRY_BOOL("write-64-hi-lo-quirk");
|
| 170 |
|
| 171 | if (dwc->usb3_lpm_capable)
|
| 172 | props[prop_idx++] = PROPERTY_ENTRY_BOOL("usb3-lpm-capable");
|
| 173 |
|
| 174 | if (dwc->usb2_lpm_disable)
|
| 175 | props[prop_idx++] = PROPERTY_ENTRY_BOOL("usb2-lpm-disable");
|
| 176 |
|
| 177 | |
| 178 | * WORKAROUND: dwc3 revisions <=3.00a have a limitation
|
| 179 | * where Port Disable command doesn't work.
|
| 180 | *
|
| 181 | * The suggested workaround is that we avoid Port Disable
|
| 182 | * completely.
|
| 183 | *
|
| 184 | * This following flag tells XHCI to do just that.
|
| 185 |
|
| 186 | if (DWC3_VER_IS_WITHIN(DWC3, ANY, 300A))
|
| 187 | props[prop_idx++] = PROPERTY_ENTRY_BOOL("quirk-broken-port-ped");
|
| 188 |
|
| 189 | props[prop_idx++] = PROPERTY_ENTRY_U16("num-hc-interrupters",
|
| 190 | dwc->num_hc_interrupters);
|
| 191 |
|
| 192 | if (prop_idx) {
|
| 193 | ret = device_create_managed_software_node(&xhci->dev, props, NULL);
|
| 194 | if (ret) {
|
| 195 | dev_err(dwc->dev, "failed to add properties to xHCI\n");
|
| 196 | goto err;
|
| 197 | }
|
| 198 | }
|
| 199 |
|
| 200 | ret = platform_device_add_data(xhci, &dwc3_xhci_plat_quirk,
|
| 201 | sizeof(struct xhci_plat_priv));
|
| 202 | if (ret)
|
| 203 | goto err;
|
| 204 |
|
| 205 | ret = platform_device_add(xhci);
|
| 206 | if (ret) {
|
| 207 | dev_err(dwc->dev, "failed to register xHCI device\n");
|
| 208 | goto err;
|
| 209 | }
|
| 210 |
|
| 211 | if (dwc->sys_wakeup) {
|
| 212 |
|
| 213 | device_wakeup_enable(dwc->sysdev);
|
| 214 |
|
| 215 |
|
| 216 | device_init_wakeup(&xhci->dev, true);
|
| 217 | }
|
| 218 |
|
| 219 | return 0;
|
| 220 | err:
|
| 221 | platform_device_put(xhci);
|
| 222 | return ret;
|
| 223 | }
|
| 224 | EXPORT_SYMBOL_GPL(dwc3_host_init);
|
| 225 |
|
| 226 | void dwc3_host_exit(struct dwc3 *dwc)
|
| 227 | {
|
| 228 | if (dwc->sys_wakeup)
|
| 229 | device_init_wakeup(&dwc->xhci->dev, false);
|
| 230 |
|
| 231 | dwc3_enable_susphy(dwc, true);
|
| 232 | platform_device_unregister(dwc->xhci);
|
| 233 | dwc->xhci = NULL;
|
| 234 | }
|
| 235 | EXPORT_SYMBOL_GPL(dwc3_host_exit);
|