| 1 | |
| 2 | |
| 3 | * AIRcable USB Bluetooth Dongle Driver.
|
| 4 | *
|
| 5 | * Copyright (C) 2010 Johan Hovold <[email protected]>
|
| 6 | * Copyright (C) 2006 Manuel Francisco Naranjo ([email protected])
|
| 7 | *
|
| 8 | * The device works as an standard CDC device, it has 2 interfaces, the first
|
| 9 | * one is for firmware access and the second is the serial one.
|
| 10 | * The protocol is very simply, there are two possibilities reading or writing.
|
| 11 | * When writing the first urb must have a Header that starts with 0x20 0x29 the
|
| 12 | * next two bytes must say how much data will be sent.
|
| 13 | * When reading the process is almost equal except that the header starts with
|
| 14 | * 0x00 0x20.
|
| 15 | *
|
| 16 | * The device simply need some stuff to understand data coming from the usb
|
| 17 | * buffer: The First and Second byte is used for a Header, the Third and Fourth
|
| 18 | * tells the device the amount of information the package holds.
|
| 19 | * Packages are 60 bytes long Header Stuff.
|
| 20 | * When writing to the device the first two bytes of the header are 0x20 0x29
|
| 21 | * When reading the bytes are 0x00 0x20, or 0x00 0x10, there is an strange
|
| 22 | * situation, when too much data arrives to the device because it sends the data
|
| 23 | * but with out the header. I will use a simply hack to override this situation,
|
| 24 | * if there is data coming that does not contain any header, then that is data
|
| 25 | * that must go directly to the tty, as there is no documentation about if there
|
| 26 | * is any other control code, I will simply check for the first
|
| 27 | * one.
|
| 28 | *
|
| 29 | * I have taken some info from a Greg Kroah-Hartman article:
|
| 30 | * http://www.linuxjournal.com/article/6573
|
| 31 | * And from Linux Device Driver Kit CD, which is a great work, the authors taken
|
| 32 | * the work to recompile lots of information an knowledge in drivers development
|
| 33 | * and made it all available inside a cd.
|
| 34 | * URL: http://kernel.org/pub/linux/kernel/people/gregkh/ddk/
|
| 35 | *
|
| 36 |
|
| 37 |
|
| 38 | #include <linux/unaligned.h>
|
| 39 | #include <linux/tty.h>
|
| 40 | #include <linux/slab.h>
|
| 41 | #include <linux/module.h>
|
| 42 | #include <linux/tty_flip.h>
|
| 43 | #include <linux/usb.h>
|
| 44 | #include <linux/usb/serial.h>
|
| 45 |
|
| 46 |
|
| 47 | #define AIRCABLE_VID 0x16CA
|
| 48 | #define AIRCABLE_USB_PID 0x1502
|
| 49 |
|
| 50 |
|
| 51 | #define HCI_HEADER_LENGTH 0x4
|
| 52 | #define TX_HEADER_0 0x20
|
| 53 | #define TX_HEADER_1 0x29
|
| 54 | #define RX_HEADER_0 0x00
|
| 55 | #define RX_HEADER_1 0x20
|
| 56 | #define HCI_COMPLETE_FRAME 64
|
| 57 |
|
| 58 |
|
| 59 | #define THROTTLED 0x01
|
| 60 | #define ACTUALLY_THROTTLED 0x02
|
| 61 |
|
| 62 | #define DRIVER_AUTHOR "Naranjo, Manuel Francisco <[email protected]>, Johan Hovold <[email protected]>"
|
| 63 | #define DRIVER_DESC "AIRcable USB Driver"
|
| 64 |
|
| 65 |
|
| 66 | static const struct usb_device_id id_table[] = {
|
| 67 | { USB_DEVICE(AIRCABLE_VID, AIRCABLE_USB_PID) },
|
| 68 | { },
|
| 69 | };
|
| 70 | MODULE_DEVICE_TABLE(usb, id_table);
|
| 71 |
|
| 72 | static int aircable_prepare_write_buffer(struct usb_serial_port *port,
|
| 73 | void *dest, size_t size)
|
| 74 | {
|
| 75 | int count;
|
| 76 | unsigned char *buf = dest;
|
| 77 |
|
| 78 | count = kfifo_out_locked(&port->write_fifo, buf + HCI_HEADER_LENGTH,
|
| 79 | size - HCI_HEADER_LENGTH, &port->lock);
|
| 80 | buf[0] = TX_HEADER_0;
|
| 81 | buf[1] = TX_HEADER_1;
|
| 82 | put_unaligned_le16(count, &buf[2]);
|
| 83 |
|
| 84 | return count + HCI_HEADER_LENGTH;
|
| 85 | }
|
| 86 |
|
| 87 | static int aircable_calc_num_ports(struct usb_serial *serial,
|
| 88 | struct usb_serial_endpoints *epds)
|
| 89 | {
|
| 90 |
|
| 91 | if (epds->num_bulk_out == 0) {
|
| 92 | dev_dbg(&serial->interface->dev,
|
| 93 | "ignoring interface with no bulk-out endpoints\n");
|
| 94 | return -ENODEV;
|
| 95 | }
|
| 96 |
|
| 97 | return 1;
|
| 98 | }
|
| 99 |
|
| 100 | static int aircable_process_packet(struct usb_serial_port *port,
|
| 101 | int has_headers, char *packet, int len)
|
| 102 | {
|
| 103 | if (has_headers) {
|
| 104 | len -= HCI_HEADER_LENGTH;
|
| 105 | packet += HCI_HEADER_LENGTH;
|
| 106 | }
|
| 107 | if (len <= 0) {
|
| 108 | dev_dbg(&port->dev, "%s - malformed packet\n", __func__);
|
| 109 | return 0;
|
| 110 | }
|
| 111 |
|
| 112 | tty_insert_flip_string(&port->port, packet, len);
|
| 113 |
|
| 114 | return len;
|
| 115 | }
|
| 116 |
|
| 117 | static void aircable_process_read_urb(struct urb *urb)
|
| 118 | {
|
| 119 | struct usb_serial_port *port = urb->context;
|
| 120 | char *data = urb->transfer_buffer;
|
| 121 | int has_headers;
|
| 122 | int count;
|
| 123 | int len;
|
| 124 | int i;
|
| 125 |
|
| 126 | has_headers = (urb->actual_length > 2 && data[0] == RX_HEADER_0);
|
| 127 |
|
| 128 | count = 0;
|
| 129 | for (i = 0; i < urb->actual_length; i += HCI_COMPLETE_FRAME) {
|
| 130 | len = min_t(int, urb->actual_length - i, HCI_COMPLETE_FRAME);
|
| 131 | count += aircable_process_packet(port, has_headers,
|
| 132 | &data[i], len);
|
| 133 | }
|
| 134 |
|
| 135 | if (count)
|
| 136 | tty_flip_buffer_push(&port->port);
|
| 137 | }
|
| 138 |
|
| 139 | static struct usb_serial_driver aircable_device = {
|
| 140 | .driver = {
|
| 141 | .name = "aircable",
|
| 142 | },
|
| 143 | .id_table = id_table,
|
| 144 | .bulk_out_size = HCI_COMPLETE_FRAME,
|
| 145 | .calc_num_ports = aircable_calc_num_ports,
|
| 146 | .process_read_urb = aircable_process_read_urb,
|
| 147 | .prepare_write_buffer = aircable_prepare_write_buffer,
|
| 148 | .throttle = usb_serial_generic_throttle,
|
| 149 | .unthrottle = usb_serial_generic_unthrottle,
|
| 150 | };
|
| 151 |
|
| 152 | static struct usb_serial_driver * const serial_drivers[] = {
|
| 153 | &aircable_device, NULL
|
| 154 | };
|
| 155 |
|
| 156 | module_usb_serial_driver(serial_drivers, id_table);
|
| 157 |
|
| 158 | MODULE_AUTHOR(DRIVER_AUTHOR);
|
| 159 | MODULE_DESCRIPTION(DRIVER_DESC);
|
| 160 | MODULE_LICENSE("GPL v2");
|