| 1 |
|
| 2 | |
| 3 | * NFC Digital Protocol stack
|
| 4 | * Copyright (c) 2013, Intel Corporation.
|
| 5 |
|
| 6 |
|
| 7 | #ifndef __NFC_DIGITAL_H
|
| 8 | #define __NFC_DIGITAL_H
|
| 9 |
|
| 10 | #include <linux/skbuff.h>
|
| 11 | #include <net/nfc/nfc.h>
|
| 12 |
|
| 13 | |
| 14 | * Configuration types for in_configure_hw and tg_configure_hw.
|
| 15 |
|
| 16 | enum {
|
| 17 | NFC_DIGITAL_CONFIG_RF_TECH = 0,
|
| 18 | NFC_DIGITAL_CONFIG_FRAMING,
|
| 19 | };
|
| 20 |
|
| 21 | |
| 22 | * RF technology values passed as param argument to in_configure_hw and
|
| 23 | * tg_configure_hw for NFC_DIGITAL_CONFIG_RF_TECH configuration type.
|
| 24 |
|
| 25 | enum {
|
| 26 | NFC_DIGITAL_RF_TECH_106A = 0,
|
| 27 | NFC_DIGITAL_RF_TECH_212F,
|
| 28 | NFC_DIGITAL_RF_TECH_424F,
|
| 29 | NFC_DIGITAL_RF_TECH_ISO15693,
|
| 30 | NFC_DIGITAL_RF_TECH_106B,
|
| 31 |
|
| 32 | NFC_DIGITAL_RF_TECH_LAST,
|
| 33 | };
|
| 34 |
|
| 35 | |
| 36 | * Framing configuration passed as param argument to in_configure_hw and
|
| 37 | * tg_configure_hw for NFC_DIGITAL_CONFIG_FRAMING configuration type.
|
| 38 |
|
| 39 | enum {
|
| 40 | NFC_DIGITAL_FRAMING_NFCA_SHORT = 0,
|
| 41 | NFC_DIGITAL_FRAMING_NFCA_STANDARD,
|
| 42 | NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A,
|
| 43 | NFC_DIGITAL_FRAMING_NFCA_ANTICOL_COMPLETE,
|
| 44 |
|
| 45 | NFC_DIGITAL_FRAMING_NFCA_T1T,
|
| 46 | NFC_DIGITAL_FRAMING_NFCA_T2T,
|
| 47 | NFC_DIGITAL_FRAMING_NFCA_T4T,
|
| 48 | NFC_DIGITAL_FRAMING_NFCA_NFC_DEP,
|
| 49 |
|
| 50 | NFC_DIGITAL_FRAMING_NFCF,
|
| 51 | NFC_DIGITAL_FRAMING_NFCF_T3T,
|
| 52 | NFC_DIGITAL_FRAMING_NFCF_NFC_DEP,
|
| 53 | NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED,
|
| 54 |
|
| 55 | NFC_DIGITAL_FRAMING_ISO15693_INVENTORY,
|
| 56 | NFC_DIGITAL_FRAMING_ISO15693_T5T,
|
| 57 |
|
| 58 | NFC_DIGITAL_FRAMING_NFCB,
|
| 59 | NFC_DIGITAL_FRAMING_NFCB_T4T,
|
| 60 |
|
| 61 | NFC_DIGITAL_FRAMING_LAST,
|
| 62 | };
|
| 63 |
|
| 64 | #define DIGITAL_MDAA_NFCID1_SIZE 3
|
| 65 |
|
| 66 | struct digital_tg_mdaa_params {
|
| 67 | u16 sens_res;
|
| 68 | u8 nfcid1[DIGITAL_MDAA_NFCID1_SIZE];
|
| 69 | u8 sel_res;
|
| 70 |
|
| 71 | u8 nfcid2[NFC_NFCID2_MAXSIZE];
|
| 72 | u16 sc;
|
| 73 | };
|
| 74 |
|
| 75 | struct nfc_digital_dev;
|
| 76 |
|
| 77 | |
| 78 | * nfc_digital_cmd_complete_t - Definition of command result callback
|
| 79 | *
|
| 80 | * @ddev: nfc_digital_device ref
|
| 81 | * @arg: user data
|
| 82 | * @resp: response data
|
| 83 | *
|
| 84 | * resp pointer can be an error code and will be checked with IS_ERR() macro.
|
| 85 | * The callback is responsible for freeing resp sk_buff.
|
| 86 |
|
| 87 | typedef void (*nfc_digital_cmd_complete_t)(struct nfc_digital_dev *ddev,
|
| 88 | void *arg, struct sk_buff *resp);
|
| 89 |
|
| 90 | |
| 91 | * Device side NFC Digital operations
|
| 92 | *
|
| 93 | * Initiator mode:
|
| 94 | * @in_configure_hw: Hardware configuration for RF technology and communication
|
| 95 | * framing in initiator mode. This is a synchronous function.
|
| 96 | * @in_send_cmd: Initiator mode data exchange using RF technology and framing
|
| 97 | * previously set with in_configure_hw. The peer response is returned
|
| 98 | * through callback cb. If an io error occurs or the peer didn't reply
|
| 99 | * within the specified timeout (ms), the error code is passed back through
|
| 100 | * the resp pointer. This is an asynchronous function.
|
| 101 | *
|
| 102 | * Target mode: Only NFC-DEP protocol is supported in target mode.
|
| 103 | * @tg_configure_hw: Hardware configuration for RF technology and communication
|
| 104 | * framing in target mode. This is a synchronous function.
|
| 105 | * @tg_send_cmd: Target mode data exchange using RF technology and framing
|
| 106 | * previously set with tg_configure_hw. The peer next command is returned
|
| 107 | * through callback cb. If an io error occurs or the peer didn't reply
|
| 108 | * within the specified timeout (ms), the error code is passed back through
|
| 109 | * the resp pointer. This is an asynchronous function.
|
| 110 | * @tg_listen: Put the device in listen mode waiting for data from the peer
|
| 111 | * device. This is an asynchronous function.
|
| 112 | * @tg_listen_mdaa: If supported, put the device in automatic listen mode with
|
| 113 | * mode detection and automatic anti-collision. In this mode, the device
|
| 114 | * automatically detects the RF technology and executes the anti-collision
|
| 115 | * detection using the command responses specified in mdaa_params. The
|
| 116 | * mdaa_params structure contains SENS_RES, NFCID1, and SEL_RES for 106A RF
|
| 117 | * tech. NFCID2 and system code (sc) for 212F and 424F. The driver returns
|
| 118 | * the NFC-DEP ATR_REQ command through cb. The digital stack deducts the RF
|
| 119 | * tech by analyzing the SoD of the frame containing the ATR_REQ command.
|
| 120 | * This is an asynchronous function.
|
| 121 | * @tg_listen_md: If supported, put the device in automatic listen mode with
|
| 122 | * mode detection but without automatic anti-collision. In this mode, the
|
| 123 | * device automatically detects the RF technology. What the actual
|
| 124 | * RF technology is can be retrieved by calling @tg_get_rf_tech.
|
| 125 | * The digital stack will then perform the appropriate anti-collision
|
| 126 | * sequence. This is an asynchronous function.
|
| 127 | * @tg_get_rf_tech: Required when @tg_listen_md is supported, unused otherwise.
|
| 128 | * Return the RF Technology that was detected by the @tg_listen_md call.
|
| 129 | * This is a synchronous function.
|
| 130 | *
|
| 131 | * @switch_rf: Turns device radio on or off. The stack does not call explicitly
|
| 132 | * switch_rf to turn the radio on. A call to in|tg_configure_hw must turn
|
| 133 | * the device radio on.
|
| 134 | * @abort_cmd: Discard the last sent command.
|
| 135 | *
|
| 136 | * Notes: Asynchronous functions have a timeout parameter. It is the driver
|
| 137 | * responsibility to call the digital stack back through the
|
| 138 | * nfc_digital_cmd_complete_t callback when no RF respsonse has been
|
| 139 | * received within the specified time (in milliseconds). In that case the
|
| 140 | * driver must set the resp sk_buff to ERR_PTR(-ETIMEDOUT).
|
| 141 | * Since the digital stack serializes commands to be sent, it's mandatory
|
| 142 | * for the driver to handle the timeout correctly. Otherwise the stack
|
| 143 | * would not be able to send new commands, waiting for the reply of the
|
| 144 | * current one.
|
| 145 |
|
| 146 | struct nfc_digital_ops {
|
| 147 | int (*in_configure_hw)(struct nfc_digital_dev *ddev, int type,
|
| 148 | int param);
|
| 149 | int (*in_send_cmd)(struct nfc_digital_dev *ddev, struct sk_buff *skb,
|
| 150 | u16 timeout, nfc_digital_cmd_complete_t cb,
|
| 151 | void *arg);
|
| 152 |
|
| 153 | int (*tg_configure_hw)(struct nfc_digital_dev *ddev, int type,
|
| 154 | int param);
|
| 155 | int (*tg_send_cmd)(struct nfc_digital_dev *ddev, struct sk_buff *skb,
|
| 156 | u16 timeout, nfc_digital_cmd_complete_t cb,
|
| 157 | void *arg);
|
| 158 | int (*tg_listen)(struct nfc_digital_dev *ddev, u16 timeout,
|
| 159 | nfc_digital_cmd_complete_t cb, void *arg);
|
| 160 | int (*tg_listen_mdaa)(struct nfc_digital_dev *ddev,
|
| 161 | struct digital_tg_mdaa_params *mdaa_params,
|
| 162 | u16 timeout, nfc_digital_cmd_complete_t cb,
|
| 163 | void *arg);
|
| 164 | int (*tg_listen_md)(struct nfc_digital_dev *ddev, u16 timeout,
|
| 165 | nfc_digital_cmd_complete_t cb, void *arg);
|
| 166 | int (*tg_get_rf_tech)(struct nfc_digital_dev *ddev, u8 *rf_tech);
|
| 167 |
|
| 168 | int (*switch_rf)(struct nfc_digital_dev *ddev, bool on);
|
| 169 | void (*abort_cmd)(struct nfc_digital_dev *ddev);
|
| 170 | };
|
| 171 |
|
| 172 | #define NFC_DIGITAL_POLL_MODE_COUNT_MAX 6
|
| 173 |
|
| 174 | typedef int (*digital_poll_t)(struct nfc_digital_dev *ddev, u8 rf_tech);
|
| 175 |
|
| 176 | struct digital_poll_tech {
|
| 177 | u8 rf_tech;
|
| 178 | digital_poll_t poll_func;
|
| 179 | };
|
| 180 |
|
| 181 | |
| 182 | * Driver capabilities - bit mask made of the following values
|
| 183 | *
|
| 184 | * @NFC_DIGITAL_DRV_CAPS_IN_CRC: The driver handles CRC calculation in initiator
|
| 185 | * mode.
|
| 186 | * @NFC_DIGITAL_DRV_CAPS_TG_CRC: The driver handles CRC calculation in target
|
| 187 | * mode.
|
| 188 |
|
| 189 | #define NFC_DIGITAL_DRV_CAPS_IN_CRC 0x0001
|
| 190 | #define NFC_DIGITAL_DRV_CAPS_TG_CRC 0x0002
|
| 191 |
|
| 192 | struct nfc_digital_dev {
|
| 193 | struct nfc_dev *nfc_dev;
|
| 194 | const struct nfc_digital_ops *ops;
|
| 195 |
|
| 196 | u32 protocols;
|
| 197 |
|
| 198 | int tx_headroom;
|
| 199 | int tx_tailroom;
|
| 200 |
|
| 201 | u32 driver_capabilities;
|
| 202 | void *driver_data;
|
| 203 |
|
| 204 | struct digital_poll_tech poll_techs[NFC_DIGITAL_POLL_MODE_COUNT_MAX];
|
| 205 | u8 poll_tech_count;
|
| 206 | u8 poll_tech_index;
|
| 207 | struct mutex poll_lock;
|
| 208 |
|
| 209 | struct work_struct cmd_work;
|
| 210 | struct work_struct cmd_complete_work;
|
| 211 | struct list_head cmd_queue;
|
| 212 | struct mutex cmd_lock;
|
| 213 |
|
| 214 | struct delayed_work poll_work;
|
| 215 |
|
| 216 | u8 curr_protocol;
|
| 217 | u8 curr_rf_tech;
|
| 218 | u8 curr_nfc_dep_pni;
|
| 219 | u8 did;
|
| 220 | u16 dep_rwt;
|
| 221 |
|
| 222 | u8 local_payload_max;
|
| 223 | u8 remote_payload_max;
|
| 224 |
|
| 225 | struct sk_buff *chaining_skb;
|
| 226 | struct digital_data_exch *data_exch;
|
| 227 |
|
| 228 | int atn_count;
|
| 229 | int nack_count;
|
| 230 |
|
| 231 | struct sk_buff *saved_skb;
|
| 232 |
|
| 233 | u16 target_fsc;
|
| 234 |
|
| 235 | int (*skb_check_crc)(struct sk_buff *skb);
|
| 236 | void (*skb_add_crc)(struct sk_buff *skb);
|
| 237 | };
|
| 238 |
|
| 239 | struct nfc_digital_dev *nfc_digital_allocate_device(const struct nfc_digital_ops *ops,
|
| 240 | __u32 supported_protocols,
|
| 241 | __u32 driver_capabilities,
|
| 242 | int tx_headroom,
|
| 243 | int tx_tailroom);
|
| 244 | void nfc_digital_free_device(struct nfc_digital_dev *ndev);
|
| 245 | int nfc_digital_register_device(struct nfc_digital_dev *ndev);
|
| 246 | void nfc_digital_unregister_device(struct nfc_digital_dev *ndev);
|
| 247 |
|
| 248 | static inline void nfc_digital_set_parent_dev(struct nfc_digital_dev *ndev,
|
| 249 | struct device *dev)
|
| 250 | {
|
| 251 | nfc_set_parent_dev(ndev->nfc_dev, dev);
|
| 252 | }
|
| 253 |
|
| 254 | static inline void nfc_digital_set_drvdata(struct nfc_digital_dev *dev,
|
| 255 | void *data)
|
| 256 | {
|
| 257 | dev->driver_data = data;
|
| 258 | }
|
| 259 |
|
| 260 | static inline void *nfc_digital_get_drvdata(struct nfc_digital_dev *dev)
|
| 261 | {
|
| 262 | return dev->driver_data;
|
| 263 | }
|
| 264 |
|
| 265 | #endif
|