projects/linux·blob v2.6.21 · refs

603 lines · 16.8 KiB

1#ifndef __ALPHA_SYSTEM_H
2#define __ALPHA_SYSTEM_H
3
4#include <asm/pal.h>
5#include <asm/page.h>
6#include <asm/barrier.h>
7
8/*
9 * System defines.. Note that this is included both from .c and .S
10 * files, so it does only defines, not any C code.
11 */
12
13/*
14 * We leave one page for the initial stack page, and one page for
15 * the initial process structure. Also, the console eats 3 MB for
16 * the initial bootloader (one of which we can reclaim later).
17 */
18#define BOOT_PCB 0x20000000
19#define BOOT_ADDR 0x20000000
20/* Remove when official MILO sources have ELF support: */
21#define BOOT_SIZE (16*1024)
22
23#ifdef CONFIG_ALPHA_LEGACY_START_ADDRESS
24#define KERNEL_START_PHYS 0x300000 /* Old bootloaders hardcoded this. */
25#else
26#define KERNEL_START_PHYS 0x1000000 /* required: Wildfire/Titan/Marvel */
27#endif
28
29#define KERNEL_START (PAGE_OFFSET+KERNEL_START_PHYS)
30#define SWAPPER_PGD KERNEL_START
31#define INIT_STACK (PAGE_OFFSET+KERNEL_START_PHYS+0x02000)
32#define EMPTY_PGT (PAGE_OFFSET+KERNEL_START_PHYS+0x04000)
33#define EMPTY_PGE (PAGE_OFFSET+KERNEL_START_PHYS+0x08000)
34#define ZERO_PGE (PAGE_OFFSET+KERNEL_START_PHYS+0x0A000)
35
36#define START_ADDR (PAGE_OFFSET+KERNEL_START_PHYS+0x10000)
37
38/*
39 * This is setup by the secondary bootstrap loader. Because
40 * the zero page is zeroed out as soon as the vm system is
41 * initialized, we need to copy things out into a more permanent
42 * place.
43 */
44#define PARAM ZERO_PGE
45#define COMMAND_LINE ((char*)(PARAM + 0x0000))
46#define INITRD_START (*(unsigned long *) (PARAM+0x100))
47#define INITRD_SIZE (*(unsigned long *) (PARAM+0x108))
48
49#ifndef __ASSEMBLY__
50#include <linux/kernel.h>
51
52/*
53 * This is the logout header that should be common to all platforms
54 * (assuming they are running OSF/1 PALcode, I guess).
55 */
56struct el_common {
57 unsigned int size; /* size in bytes of logout area */
58 unsigned int sbz1 : 30; /* should be zero */
59 unsigned int err2 : 1; /* second error */
60 unsigned int retry : 1; /* retry flag */
61 unsigned int proc_offset; /* processor-specific offset */
62 unsigned int sys_offset; /* system-specific offset */
63 unsigned int code; /* machine check code */
64 unsigned int frame_rev; /* frame revision */
65};
66
67/* Machine Check Frame for uncorrectable errors (Large format)
68 * --- This is used to log uncorrectable errors such as
69 * double bit ECC errors.
70 * --- These errors are detected by both processor and systems.
71 */
72struct el_common_EV5_uncorrectable_mcheck {
73 unsigned long shadow[8]; /* Shadow reg. 8-14, 25 */
74 unsigned long paltemp[24]; /* PAL TEMP REGS. */
75 unsigned long exc_addr; /* Address of excepting instruction*/
76 unsigned long exc_sum; /* Summary of arithmetic traps. */
77 unsigned long exc_mask; /* Exception mask (from exc_sum). */
78 unsigned long pal_base; /* Base address for PALcode. */
79 unsigned long isr; /* Interrupt Status Reg. */
80 unsigned long icsr; /* CURRENT SETUP OF EV5 IBOX */
81 unsigned long ic_perr_stat; /* I-CACHE Reg. <11> set Data parity
82 <12> set TAG parity*/
83 unsigned long dc_perr_stat; /* D-CACHE error Reg. Bits set to 1:
84 <2> Data error in bank 0
85 <3> Data error in bank 1
86 <4> Tag error in bank 0
87 <5> Tag error in bank 1 */
88 unsigned long va; /* Effective VA of fault or miss. */
89 unsigned long mm_stat; /* Holds the reason for D-stream
90 fault or D-cache parity errors */
91 unsigned long sc_addr; /* Address that was being accessed
92 when EV5 detected Secondary cache
93 failure. */
94 unsigned long sc_stat; /* Helps determine if the error was
95 TAG/Data parity(Secondary Cache)*/
96 unsigned long bc_tag_addr; /* Contents of EV5 BC_TAG_ADDR */
97 unsigned long ei_addr; /* Physical address of any transfer
98 that is logged in EV5 EI_STAT */
99 unsigned long fill_syndrome; /* For correcting ECC errors. */
100 unsigned long ei_stat; /* Helps identify reason of any
101 processor uncorrectable error
102 at its external interface. */
103 unsigned long ld_lock; /* Contents of EV5 LD_LOCK register*/
104};
105
106struct el_common_EV6_mcheck {
107 unsigned int FrameSize; /* Bytes, including this field */
108 unsigned int FrameFlags; /* <31> = Retry, <30> = Second Error */
109 unsigned int CpuOffset; /* Offset to CPU-specific info */
110 unsigned int SystemOffset; /* Offset to system-specific info */
111 unsigned int MCHK_Code;
112 unsigned int MCHK_Frame_Rev;
113 unsigned long I_STAT; /* EV6 Internal Processor Registers */
114 unsigned long DC_STAT; /* (See the 21264 Spec) */
115 unsigned long C_ADDR;
116 unsigned long DC1_SYNDROME;
117 unsigned long DC0_SYNDROME;
118 unsigned long C_STAT;
119 unsigned long C_STS;
120 unsigned long MM_STAT;
121 unsigned long EXC_ADDR;
122 unsigned long IER_CM;
123 unsigned long ISUM;
124 unsigned long RESERVED0;
125 unsigned long PAL_BASE;
126 unsigned long I_CTL;
127 unsigned long PCTX;
128};
129
130extern void halt(void) __attribute__((noreturn));
131#define __halt() __asm__ __volatile__ ("call_pal %0 #halt" : : "i" (PAL_halt))
132
133#define switch_to(P,N,L) \
134 do { \
135 (L) = alpha_switch_to(virt_to_phys(&task_thread_info(N)->pcb), (P)); \
136 check_mmu_context(); \
137 } while (0)
138
139struct task_struct;
140extern struct task_struct *alpha_switch_to(unsigned long, struct task_struct*);
141
142/*
143 * On SMP systems, when the scheduler does migration-cost autodetection,
144 * it needs a way to flush as much of the CPU's caches as possible.
145 *
146 * TODO: fill this in!
147 */
148static inline void sched_cacheflush(void)
149{
150}
151
152#define imb() \
153__asm__ __volatile__ ("call_pal %0 #imb" : : "i" (PAL_imb) : "memory")
154
155#define draina() \
156__asm__ __volatile__ ("call_pal %0 #draina" : : "i" (PAL_draina) : "memory")
157
158enum implver_enum {
159 IMPLVER_EV4,
160 IMPLVER_EV5,
161 IMPLVER_EV6
162};
163
164#ifdef CONFIG_ALPHA_GENERIC
165#define implver() \
166({ unsigned long __implver; \
167 __asm__ ("implver %0" : "=r"(__implver)); \
168 (enum implver_enum) __implver; })
169#else
170/* Try to eliminate some dead code. */
171#ifdef CONFIG_ALPHA_EV4
172#define implver() IMPLVER_EV4
173#endif
174#ifdef CONFIG_ALPHA_EV5
175#define implver() IMPLVER_EV5
176#endif
177#if defined(CONFIG_ALPHA_EV6)
178#define implver() IMPLVER_EV6
179#endif
180#endif
181
182enum amask_enum {
183 AMASK_BWX = (1UL << 0),
184 AMASK_FIX = (1UL << 1),
185 AMASK_CIX = (1UL << 2),
186 AMASK_MAX = (1UL << 8),
187 AMASK_PRECISE_TRAP = (1UL << 9),
188};
189
190#define amask(mask) \
191({ unsigned long __amask, __input = (mask); \
192 __asm__ ("amask %1,%0" : "=r"(__amask) : "rI"(__input)); \
193 __amask; })
194
195#define __CALL_PAL_R0(NAME, TYPE) \
196static inline TYPE NAME(void) \
197{ \
198 register TYPE __r0 __asm__("$0"); \
199 __asm__ __volatile__( \
200 "call_pal %1 # " #NAME \
201 :"=r" (__r0) \
202 :"i" (PAL_ ## NAME) \
203 :"$1", "$16", "$22", "$23", "$24", "$25"); \
204 return __r0; \
205}
206
207#define __CALL_PAL_W1(NAME, TYPE0) \
208static inline void NAME(TYPE0 arg0) \
209{ \
210 register TYPE0 __r16 __asm__("$16") = arg0; \
211 __asm__ __volatile__( \
212 "call_pal %1 # "#NAME \
213 : "=r"(__r16) \
214 : "i"(PAL_ ## NAME), "0"(__r16) \
215 : "$1", "$22", "$23", "$24", "$25"); \
216}
217
218#define __CALL_PAL_W2(NAME, TYPE0, TYPE1) \
219static inline void NAME(TYPE0 arg0, TYPE1 arg1) \
220{ \
221 register TYPE0 __r16 __asm__("$16") = arg0; \
222 register TYPE1 __r17 __asm__("$17") = arg1; \
223 __asm__ __volatile__( \
224 "call_pal %2 # "#NAME \
225 : "=r"(__r16), "=r"(__r17) \
226 : "i"(PAL_ ## NAME), "0"(__r16), "1"(__r17) \
227 : "$1", "$22", "$23", "$24", "$25"); \
228}
229
230#define __CALL_PAL_RW1(NAME, RTYPE, TYPE0) \
231static inline RTYPE NAME(TYPE0 arg0) \
232{ \
233 register RTYPE __r0 __asm__("$0"); \
234 register TYPE0 __r16 __asm__("$16") = arg0; \
235 __asm__ __volatile__( \
236 "call_pal %2 # "#NAME \
237 : "=r"(__r16), "=r"(__r0) \
238 : "i"(PAL_ ## NAME), "0"(__r16) \
239 : "$1", "$22", "$23", "$24", "$25"); \
240 return __r0; \
241}
242
243#define __CALL_PAL_RW2(NAME, RTYPE, TYPE0, TYPE1) \
244static inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1) \
245{ \
246 register RTYPE __r0 __asm__("$0"); \
247 register TYPE0 __r16 __asm__("$16") = arg0; \
248 register TYPE1 __r17 __asm__("$17") = arg1; \
249 __asm__ __volatile__( \
250 "call_pal %3 # "#NAME \
251 : "=r"(__r16), "=r"(__r17), "=r"(__r0) \
252 : "i"(PAL_ ## NAME), "0"(__r16), "1"(__r17) \
253 : "$1", "$22", "$23", "$24", "$25"); \
254 return __r0; \
255}
256
257__CALL_PAL_W1(cflush, unsigned long);
258__CALL_PAL_R0(rdmces, unsigned long);
259__CALL_PAL_R0(rdps, unsigned long);
260__CALL_PAL_R0(rdusp, unsigned long);
261__CALL_PAL_RW1(swpipl, unsigned long, unsigned long);
262__CALL_PAL_R0(whami, unsigned long);
263__CALL_PAL_W2(wrent, void*, unsigned long);
264__CALL_PAL_W1(wripir, unsigned long);
265__CALL_PAL_W1(wrkgp, unsigned long);
266__CALL_PAL_W1(wrmces, unsigned long);
267__CALL_PAL_RW2(wrperfmon, unsigned long, unsigned long, unsigned long);
268__CALL_PAL_W1(wrusp, unsigned long);
269__CALL_PAL_W1(wrvptptr, unsigned long);
270
271#define IPL_MIN 0
272#define IPL_SW0 1
273#define IPL_SW1 2
274#define IPL_DEV0 3
275#define IPL_DEV1 4
276#define IPL_TIMER 5
277#define IPL_PERF 6
278#define IPL_POWERFAIL 6
279#define IPL_MCHECK 7
280#define IPL_MAX 7
281
282#ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK
283#undef IPL_MIN
284#define IPL_MIN __min_ipl
285extern int __min_ipl;
286#endif
287
288#define getipl() (rdps() & 7)
289#define setipl(ipl) ((void) swpipl(ipl))
290
291#define local_irq_disable() do { setipl(IPL_MAX); barrier(); } while(0)
292#define local_irq_enable() do { barrier(); setipl(IPL_MIN); } while(0)
293#define local_save_flags(flags) ((flags) = rdps())
294#define local_irq_save(flags) do { (flags) = swpipl(IPL_MAX); barrier(); } while(0)
295#define local_irq_restore(flags) do { barrier(); setipl(flags); barrier(); } while(0)
296
297#define irqs_disabled() (getipl() == IPL_MAX)
298
299/*
300 * TB routines..
301 */
302#define __tbi(nr,arg,arg1...) \
303({ \
304 register unsigned long __r16 __asm__("$16") = (nr); \
305 register unsigned long __r17 __asm__("$17"); arg; \
306 __asm__ __volatile__( \
307 "call_pal %3 #__tbi" \
308 :"=r" (__r16),"=r" (__r17) \
309 :"0" (__r16),"i" (PAL_tbi) ,##arg1 \
310 :"$0", "$1", "$22", "$23", "$24", "$25"); \
311})
312
313#define tbi(x,y) __tbi(x,__r17=(y),"1" (__r17))
314#define tbisi(x) __tbi(1,__r17=(x),"1" (__r17))
315#define tbisd(x) __tbi(2,__r17=(x),"1" (__r17))
316#define tbis(x) __tbi(3,__r17=(x),"1" (__r17))
317#define tbiap() __tbi(-1, /* no second argument */)
318#define tbia() __tbi(-2, /* no second argument */)
319
320/*
321 * Atomic exchange.
322 * Since it can be used to implement critical sections
323 * it must clobber "memory" (also for interrupts in UP).
324 */
325
326static inline unsigned long
327__xchg_u8(volatile char *m, unsigned long val)
328{
329 unsigned long ret, tmp, addr64;
330
331 __asm__ __volatile__(
332 " andnot %4,7,%3\n"
333 " insbl %1,%4,%1\n"
334 "1: ldq_l %2,0(%3)\n"
335 " extbl %2,%4,%0\n"
336 " mskbl %2,%4,%2\n"
337 " or %1,%2,%2\n"
338 " stq_c %2,0(%3)\n"
339 " beq %2,2f\n"
340#ifdef CONFIG_SMP
341 " mb\n"
342#endif
343 ".subsection 2\n"
344 "2: br 1b\n"
345 ".previous"
346 : "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
347 : "r" ((long)m), "1" (val) : "memory");
348
349 return ret;
350}
351
352static inline unsigned long
353__xchg_u16(volatile short *m, unsigned long val)
354{
355 unsigned long ret, tmp, addr64;
356
357 __asm__ __volatile__(
358 " andnot %4,7,%3\n"
359 " inswl %1,%4,%1\n"
360 "1: ldq_l %2,0(%3)\n"
361 " extwl %2,%4,%0\n"
362 " mskwl %2,%4,%2\n"
363 " or %1,%2,%2\n"
364 " stq_c %2,0(%3)\n"
365 " beq %2,2f\n"
366#ifdef CONFIG_SMP
367 " mb\n"
368#endif
369 ".subsection 2\n"
370 "2: br 1b\n"
371 ".previous"
372 : "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
373 : "r" ((long)m), "1" (val) : "memory");
374
375 return ret;
376}
377
378static inline unsigned long
379__xchg_u32(volatile int *m, unsigned long val)
380{
381 unsigned long dummy;
382
383 __asm__ __volatile__(
384 "1: ldl_l %0,%4\n"
385 " bis $31,%3,%1\n"
386 " stl_c %1,%2\n"
387 " beq %1,2f\n"
388#ifdef CONFIG_SMP
389 " mb\n"
390#endif
391 ".subsection 2\n"
392 "2: br 1b\n"
393 ".previous"
394 : "=&r" (val), "=&r" (dummy), "=m" (*m)
395 : "rI" (val), "m" (*m) : "memory");
396
397 return val;
398}
399
400static inline unsigned long
401__xchg_u64(volatile long *m, unsigned long val)
402{
403 unsigned long dummy;
404
405 __asm__ __volatile__(
406 "1: ldq_l %0,%4\n"
407 " bis $31,%3,%1\n"
408 " stq_c %1,%2\n"
409 " beq %1,2f\n"
410#ifdef CONFIG_SMP
411 " mb\n"
412#endif
413 ".subsection 2\n"
414 "2: br 1b\n"
415 ".previous"
416 : "=&r" (val), "=&r" (dummy), "=m" (*m)
417 : "rI" (val), "m" (*m) : "memory");
418
419 return val;
420}
421
422/* This function doesn't exist, so you'll get a linker error
423 if something tries to do an invalid xchg(). */
424extern void __xchg_called_with_bad_pointer(void);
425
426#define __xchg(ptr, x, size) \
427({ \
428 unsigned long __xchg__res; \
429 volatile void *__xchg__ptr = (ptr); \
430 switch (size) { \
431 case 1: __xchg__res = __xchg_u8(__xchg__ptr, x); break; \
432 case 2: __xchg__res = __xchg_u16(__xchg__ptr, x); break; \
433 case 4: __xchg__res = __xchg_u32(__xchg__ptr, x); break; \
434 case 8: __xchg__res = __xchg_u64(__xchg__ptr, x); break; \
435 default: __xchg_called_with_bad_pointer(); __xchg__res = x; \
436 } \
437 __xchg__res; \
438})
439
440#define xchg(ptr,x) \
441 ({ \
442 __typeof__(*(ptr)) _x_ = (x); \
443 (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \
444 })
445
446#define tas(ptr) (xchg((ptr),1))
447
448
449/*
450 * Atomic compare and exchange. Compare OLD with MEM, if identical,
451 * store NEW in MEM. Return the initial value in MEM. Success is
452 * indicated by comparing RETURN with OLD.
453 *
454 * The memory barrier should be placed in SMP only when we actually
455 * make the change. If we don't change anything (so if the returned
456 * prev is equal to old) then we aren't acquiring anything new and
457 * we don't need any memory barrier as far I can tell.
458 */
459
460#define __HAVE_ARCH_CMPXCHG 1
461
462static inline unsigned long
463__cmpxchg_u8(volatile char *m, long old, long new)
464{
465 unsigned long prev, tmp, cmp, addr64;
466
467 __asm__ __volatile__(
468 " andnot %5,7,%4\n"
469 " insbl %1,%5,%1\n"
470 "1: ldq_l %2,0(%4)\n"
471 " extbl %2,%5,%0\n"
472 " cmpeq %0,%6,%3\n"
473 " beq %3,2f\n"
474 " mskbl %2,%5,%2\n"
475 " or %1,%2,%2\n"
476 " stq_c %2,0(%4)\n"
477 " beq %2,3f\n"
478#ifdef CONFIG_SMP
479 " mb\n"
480#endif
481 "2:\n"
482 ".subsection 2\n"
483 "3: br 1b\n"
484 ".previous"
485 : "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
486 : "r" ((long)m), "Ir" (old), "1" (new) : "memory");
487
488 return prev;
489}
490
491static inline unsigned long
492__cmpxchg_u16(volatile short *m, long old, long new)
493{
494 unsigned long prev, tmp, cmp, addr64;
495
496 __asm__ __volatile__(
497 " andnot %5,7,%4\n"
498 " inswl %1,%5,%1\n"
499 "1: ldq_l %2,0(%4)\n"
500 " extwl %2,%5,%0\n"
501 " cmpeq %0,%6,%3\n"
502 " beq %3,2f\n"
503 " mskwl %2,%5,%2\n"
504 " or %1,%2,%2\n"
505 " stq_c %2,0(%4)\n"
506 " beq %2,3f\n"
507#ifdef CONFIG_SMP
508 " mb\n"
509#endif
510 "2:\n"
511 ".subsection 2\n"
512 "3: br 1b\n"
513 ".previous"
514 : "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
515 : "r" ((long)m), "Ir" (old), "1" (new) : "memory");
516
517 return prev;
518}
519
520static inline unsigned long
521__cmpxchg_u32(volatile int *m, int old, int new)
522{
523 unsigned long prev, cmp;
524
525 __asm__ __volatile__(
526 "1: ldl_l %0,%5\n"
527 " cmpeq %0,%3,%1\n"
528 " beq %1,2f\n"
529 " mov %4,%1\n"
530 " stl_c %1,%2\n"
531 " beq %1,3f\n"
532#ifdef CONFIG_SMP
533 " mb\n"
534#endif
535 "2:\n"
536 ".subsection 2\n"
537 "3: br 1b\n"
538 ".previous"
539 : "=&r"(prev), "=&r"(cmp), "=m"(*m)
540 : "r"((long) old), "r"(new), "m"(*m) : "memory");
541
542 return prev;
543}
544
545static inline unsigned long
546__cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new)
547{
548 unsigned long prev, cmp;
549
550 __asm__ __volatile__(
551 "1: ldq_l %0,%5\n"
552 " cmpeq %0,%3,%1\n"
553 " beq %1,2f\n"
554 " mov %4,%1\n"
555 " stq_c %1,%2\n"
556 " beq %1,3f\n"
557#ifdef CONFIG_SMP
558 " mb\n"
559#endif
560 "2:\n"
561 ".subsection 2\n"
562 "3: br 1b\n"
563 ".previous"
564 : "=&r"(prev), "=&r"(cmp), "=m"(*m)
565 : "r"((long) old), "r"(new), "m"(*m) : "memory");
566
567 return prev;
568}
569
570/* This function doesn't exist, so you'll get a linker error
571 if something tries to do an invalid cmpxchg(). */
572extern void __cmpxchg_called_with_bad_pointer(void);
573
574static __always_inline unsigned long
575__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
576{
577 switch (size) {
578 case 1:
579 return __cmpxchg_u8(ptr, old, new);
580 case 2:
581 return __cmpxchg_u16(ptr, old, new);
582 case 4:
583 return __cmpxchg_u32(ptr, old, new);
584 case 8:
585 return __cmpxchg_u64(ptr, old, new);
586 }
587 __cmpxchg_called_with_bad_pointer();
588 return old;
589}
590
591#define cmpxchg(ptr,o,n) \
592 ({ \
593 __typeof__(*(ptr)) _o_ = (o); \
594 __typeof__(*(ptr)) _n_ = (n); \
595 (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
596 (unsigned long)_n_, sizeof(*(ptr))); \
597 })
598
599#endif /* __ASSEMBLY__ */
600
601#define arch_align_stack(x) (x)
602
603#endif