| 1 | |
| 2 | * linux/drivers/block/loop.c
|
| 3 | *
|
| 4 | * Written by Theodore Ts'o, 3/29/93
|
| 5 | *
|
| 6 | * Copyright 1993 by Theodore Ts'o. Redistribution of this file is
|
| 7 | * permitted under the GNU General Public License.
|
| 8 | *
|
| 9 | * DES encryption plus some minor changes by Werner Almesberger, 30-MAY-1993
|
| 10 | * more DES encryption plus IDEA encryption by Nicholas J. Leon, June 20, 1996
|
| 11 | *
|
| 12 | * Modularized and updated for 1.1.16 kernel - Mitch Dsouza 28th May 1994
|
| 13 | * Adapted for 1.3.59 kernel - Andries Brouwer, 1 Feb 1996
|
| 14 | *
|
| 15 | * Fixed do_loop_request() re-entrancy - [email protected] Mar 20, 1997
|
| 16 | *
|
| 17 | * Added devfs support - Richard Gooch <[email protected]> 16-Jan-1998
|
| 18 | *
|
| 19 | * Handle sparse backing files correctly - Kenn Humborg, Jun 28, 1998
|
| 20 | *
|
| 21 | * Loadable modules and other fixes by AK, 1998
|
| 22 | *
|
| 23 | * Make real block number available to downstream transfer functions, enables
|
| 24 | * CBC (and relatives) mode encryption requiring unique IVs per data block.
|
| 25 | * Reed H. Petty, [email protected]
|
| 26 | *
|
| 27 | * Maximum number of loop devices now dynamic via max_loop module parameter.
|
| 28 | * Russell Kroll <[email protected]> 19990701
|
| 29 | *
|
| 30 | * Maximum number of loop devices when compiled-in now selectable by passing
|
| 31 | * max_loop=<1-255> to the kernel on boot.
|
| 32 | * Erik I. Bolsø, <[email protected]>, Oct 31, 1999
|
| 33 | *
|
| 34 | * Completely rewrite request handling to be make_request_fn style and
|
| 35 | * non blocking, pushing work to a helper thread. Lots of fixes from
|
| 36 | * Al Viro too.
|
| 37 | * Jens Axboe <[email protected]>, Nov 2000
|
| 38 | *
|
| 39 | * Support up to 256 loop devices
|
| 40 | * Heinz Mauelshagen <[email protected]>, Feb 2002
|
| 41 | *
|
| 42 | * Support for falling back on the write file operation when the address space
|
| 43 | * operations write_begin is not available on the backing filesystem.
|
| 44 | * Anton Altaparmakov, 16 Feb 2005
|
| 45 | *
|
| 46 | * Still To Fix:
|
| 47 | * - Advisory locking is ignored here.
|
| 48 | * - Should use an own CAP_* category instead of CAP_SYS_ADMIN
|
| 49 | *
|
| 50 |
|
| 51 |
|
| 52 | #include <linux/module.h>
|
| 53 | #include <linux/moduleparam.h>
|
| 54 | #include <linux/sched.h>
|
| 55 | #include <linux/fs.h>
|
| 56 | #include <linux/file.h>
|
| 57 | #include <linux/stat.h>
|
| 58 | #include <linux/errno.h>
|
| 59 | #include <linux/major.h>
|
| 60 | #include <linux/wait.h>
|
| 61 | #include <linux/blkdev.h>
|
| 62 | #include <linux/blkpg.h>
|
| 63 | #include <linux/init.h>
|
| 64 | #include <linux/swap.h>
|
| 65 | #include <linux/slab.h>
|
| 66 | #include <linux/loop.h>
|
| 67 | #include <linux/compat.h>
|
| 68 | #include <linux/suspend.h>
|
| 69 | #include <linux/freezer.h>
|
| 70 | #include <linux/writeback.h>
|
| 71 | #include <linux/buffer_head.h>
|
| 72 | #include <linux/completion.h>
|
| 73 | #include <linux/highmem.h>
|
| 74 | #include <linux/kthread.h>
|
| 75 | #include <linux/splice.h>
|
| 76 |
|
| 77 | #include <asm/uaccess.h>
|
| 78 |
|
| 79 | static LIST_HEAD(loop_devices);
|
| 80 | static DEFINE_MUTEX(loop_devices_mutex);
|
| 81 |
|
| 82 | static int max_part;
|
| 83 | static int part_shift;
|
| 84 |
|
| 85 | |
| 86 | * Transfer functions
|
| 87 |
|
| 88 | static int transfer_none(struct loop_device *lo, int cmd,
|
| 89 | struct page *raw_page, unsigned raw_off,
|
| 90 | struct page *loop_page, unsigned loop_off,
|
| 91 | int size, sector_t real_block)
|
| 92 | {
|
| 93 | char *raw_buf = kmap_atomic(raw_page, KM_USER0) + raw_off;
|
| 94 | char *loop_buf = kmap_atomic(loop_page, KM_USER1) + loop_off;
|
| 95 |
|
| 96 | if (cmd == READ)
|
| 97 | memcpy(loop_buf, raw_buf, size);
|
| 98 | else
|
| 99 | memcpy(raw_buf, loop_buf, size);
|
| 100 |
|
| 101 | kunmap_atomic(raw_buf, KM_USER0);
|
| 102 | kunmap_atomic(loop_buf, KM_USER1);
|
| 103 | cond_resched();
|
| 104 | return 0;
|
| 105 | }
|
| 106 |
|
| 107 | static int transfer_xor(struct loop_device *lo, int cmd,
|
| 108 | struct page *raw_page, unsigned raw_off,
|
| 109 | struct page *loop_page, unsigned loop_off,
|
| 110 | int size, sector_t real_block)
|
| 111 | {
|
| 112 | char *raw_buf = kmap_atomic(raw_page, KM_USER0) + raw_off;
|
| 113 | char *loop_buf = kmap_atomic(loop_page, KM_USER1) + loop_off;
|
| 114 | char *in, *out, *key;
|
| 115 | int i, keysize;
|
| 116 |
|
| 117 | if (cmd == READ) {
|
| 118 | in = raw_buf;
|
| 119 | out = loop_buf;
|
| 120 | } else {
|
| 121 | in = loop_buf;
|
| 122 | out = raw_buf;
|
| 123 | }
|
| 124 |
|
| 125 | key = lo->lo_encrypt_key;
|
| 126 | keysize = lo->lo_encrypt_key_size;
|
| 127 | for (i = 0; i < size; i++)
|
| 128 | *out++ = *in++ ^ key[(i & 511) % keysize];
|
| 129 |
|
| 130 | kunmap_atomic(raw_buf, KM_USER0);
|
| 131 | kunmap_atomic(loop_buf, KM_USER1);
|
| 132 | cond_resched();
|
| 133 | return 0;
|
| 134 | }
|
| 135 |
|
| 136 | static int xor_init(struct loop_device *lo, const struct loop_info64 *info)
|
| 137 | {
|
| 138 | if (unlikely(info->lo_encrypt_key_size <= 0))
|
| 139 | return -EINVAL;
|
| 140 | return 0;
|
| 141 | }
|
| 142 |
|
| 143 | static struct loop_func_table none_funcs = {
|
| 144 | .number = LO_CRYPT_NONE,
|
| 145 | .transfer = transfer_none,
|
| 146 | };
|
| 147 |
|
| 148 | static struct loop_func_table xor_funcs = {
|
| 149 | .number = LO_CRYPT_XOR,
|
| 150 | .transfer = transfer_xor,
|
| 151 | .init = xor_init
|
| 152 | };
|
| 153 |
|
| 154 |
|
| 155 | static struct loop_func_table *xfer_funcs[MAX_LO_CRYPT] = {
|
| 156 | &none_funcs,
|
| 157 | &xor_funcs
|
| 158 | };
|
| 159 |
|
| 160 | static loff_t get_loop_size(struct loop_device *lo, struct file *file)
|
| 161 | {
|
| 162 | loff_t size, offset, loopsize;
|
| 163 |
|
| 164 |
|
| 165 | size = i_size_read(file->f_mapping->host);
|
| 166 | offset = lo->lo_offset;
|
| 167 | loopsize = size - offset;
|
| 168 | if (lo->lo_sizelimit > 0 && lo->lo_sizelimit < loopsize)
|
| 169 | loopsize = lo->lo_sizelimit;
|
| 170 |
|
| 171 | |
| 172 | * Unfortunately, if we want to do I/O on the device,
|
| 173 | * the number of 512-byte sectors has to fit into a sector_t.
|
| 174 |
|
| 175 | return loopsize >> 9;
|
| 176 | }
|
| 177 |
|
| 178 | static int
|
| 179 | figure_loop_size(struct loop_device *lo)
|
| 180 | {
|
| 181 | loff_t size = get_loop_size(lo, lo->lo_backing_file);
|
| 182 | sector_t x = (sector_t)size;
|
| 183 |
|
| 184 | if (unlikely((loff_t)x != size))
|
| 185 | return -EFBIG;
|
| 186 |
|
| 187 | set_capacity(lo->lo_disk, x);
|
| 188 | return 0;
|
| 189 | }
|
| 190 |
|
| 191 | static inline int
|
| 192 | lo_do_transfer(struct loop_device *lo, int cmd,
|
| 193 | struct page *rpage, unsigned roffs,
|
| 194 | struct page *lpage, unsigned loffs,
|
| 195 | int size, sector_t rblock)
|
| 196 | {
|
| 197 | if (unlikely(!lo->transfer))
|
| 198 | return 0;
|
| 199 |
|
| 200 | return lo->transfer(lo, cmd, rpage, roffs, lpage, loffs, size, rblock);
|
| 201 | }
|
| 202 |
|
| 203 | |
| 204 | * do_lo_send_aops - helper for writing data to a loop device
|
| 205 | *
|
| 206 | * This is the fast version for backing filesystems which implement the address
|
| 207 | * space operations write_begin and write_end.
|
| 208 |
|
| 209 | static int do_lo_send_aops(struct loop_device *lo, struct bio_vec *bvec,
|
| 210 | loff_t pos, struct page *unused)
|
| 211 | {
|
| 212 | struct file *file = lo->lo_backing_file;
|
| 213 | struct address_space *mapping = file->f_mapping;
|
| 214 | pgoff_t index;
|
| 215 | unsigned offset, bv_offs;
|
| 216 | int len, ret;
|
| 217 |
|
| 218 | mutex_lock(&mapping->host->i_mutex);
|
| 219 | index = pos >> PAGE_CACHE_SHIFT;
|
| 220 | offset = pos & ((pgoff_t)PAGE_CACHE_SIZE - 1);
|
| 221 | bv_offs = bvec->bv_offset;
|
| 222 | len = bvec->bv_len;
|
| 223 | while (len > 0) {
|
| 224 | sector_t IV;
|
| 225 | unsigned size, copied;
|
| 226 | int transfer_result;
|
| 227 | struct page *page;
|
| 228 | void *fsdata;
|
| 229 |
|
| 230 | IV = ((sector_t)index << (PAGE_CACHE_SHIFT - 9))+(offset >> 9);
|
| 231 | size = PAGE_CACHE_SIZE - offset;
|
| 232 | if (size > len)
|
| 233 | size = len;
|
| 234 |
|
| 235 | ret = pagecache_write_begin(file, mapping, pos, size, 0,
|
| 236 | &page, &fsdata);
|
| 237 | if (ret)
|
| 238 | goto fail;
|
| 239 |
|
| 240 | file_update_time(file);
|
| 241 |
|
| 242 | transfer_result = lo_do_transfer(lo, WRITE, page, offset,
|
| 243 | bvec->bv_page, bv_offs, size, IV);
|
| 244 | copied = size;
|
| 245 | if (unlikely(transfer_result))
|
| 246 | copied = 0;
|
| 247 |
|
| 248 | ret = pagecache_write_end(file, mapping, pos, size, copied,
|
| 249 | page, fsdata);
|
| 250 | if (ret < 0 || ret != copied)
|
| 251 | goto fail;
|
| 252 |
|
| 253 | if (unlikely(transfer_result))
|
| 254 | goto fail;
|
| 255 |
|
| 256 | bv_offs += copied;
|
| 257 | len -= copied;
|
| 258 | offset = 0;
|
| 259 | index++;
|
| 260 | pos += copied;
|
| 261 | }
|
| 262 | ret = 0;
|
| 263 | out:
|
| 264 | mutex_unlock(&mapping->host->i_mutex);
|
| 265 | return ret;
|
| 266 | fail:
|
| 267 | ret = -1;
|
| 268 | goto out;
|
| 269 | }
|
| 270 |
|
| 271 | |
| 272 | * __do_lo_send_write - helper for writing data to a loop device
|
| 273 | *
|
| 274 | * This helper just factors out common code between do_lo_send_direct_write()
|
| 275 | * and do_lo_send_write().
|
| 276 |
|
| 277 | static int __do_lo_send_write(struct file *file,
|
| 278 | u8 *buf, const int len, loff_t pos)
|
| 279 | {
|
| 280 | ssize_t bw;
|
| 281 | mm_segment_t old_fs = get_fs();
|
| 282 |
|
| 283 | set_fs(get_ds());
|
| 284 | bw = file->f_op->write(file, buf, len, &pos);
|
| 285 | set_fs(old_fs);
|
| 286 | if (likely(bw == len))
|
| 287 | return 0;
|
| 288 | printk(KERN_ERR "loop: Write error at byte offset %llu, length %i.\n",
|
| 289 | (unsigned long long)pos, len);
|
| 290 | if (bw >= 0)
|
| 291 | bw = -EIO;
|
| 292 | return bw;
|
| 293 | }
|
| 294 |
|
| 295 | |
| 296 | * do_lo_send_direct_write - helper for writing data to a loop device
|
| 297 | *
|
| 298 | * This is the fast, non-transforming version for backing filesystems which do
|
| 299 | * not implement the address space operations write_begin and write_end.
|
| 300 | * It uses the write file operation which should be present on all writeable
|
| 301 | * filesystems.
|
| 302 |
|
| 303 | static int do_lo_send_direct_write(struct loop_device *lo,
|
| 304 | struct bio_vec *bvec, loff_t pos, struct page *page)
|
| 305 | {
|
| 306 | ssize_t bw = __do_lo_send_write(lo->lo_backing_file,
|
| 307 | kmap(bvec->bv_page) + bvec->bv_offset,
|
| 308 | bvec->bv_len, pos);
|
| 309 | kunmap(bvec->bv_page);
|
| 310 | cond_resched();
|
| 311 | return bw;
|
| 312 | }
|
| 313 |
|
| 314 | |
| 315 | * do_lo_send_write - helper for writing data to a loop device
|
| 316 | *
|
| 317 | * This is the slow, transforming version for filesystems which do not
|
| 318 | * implement the address space operations write_begin and write_end. It
|
| 319 | * uses the write file operation which should be present on all writeable
|
| 320 | * filesystems.
|
| 321 | *
|
| 322 | * Using fops->write is slower than using aops->{prepare,commit}_write in the
|
| 323 | * transforming case because we need to double buffer the data as we cannot do
|
| 324 | * the transformations in place as we do not have direct access to the
|
| 325 | * destination pages of the backing file.
|
| 326 |
|
| 327 | static int do_lo_send_write(struct loop_device *lo, struct bio_vec *bvec,
|
| 328 | loff_t pos, struct page *page)
|
| 329 | {
|
| 330 | int ret = lo_do_transfer(lo, WRITE, page, 0, bvec->bv_page,
|
| 331 | bvec->bv_offset, bvec->bv_len, pos >> 9);
|
| 332 | if (likely(!ret))
|
| 333 | return __do_lo_send_write(lo->lo_backing_file,
|
| 334 | page_address(page), bvec->bv_len,
|
| 335 | pos);
|
| 336 | printk(KERN_ERR "loop: Transfer error at byte offset %llu, "
|
| 337 | "length %i.\n", (unsigned long long)pos, bvec->bv_len);
|
| 338 | if (ret > 0)
|
| 339 | ret = -EIO;
|
| 340 | return ret;
|
| 341 | }
|
| 342 |
|
| 343 | static int lo_send(struct loop_device *lo, struct bio *bio, loff_t pos)
|
| 344 | {
|
| 345 | int (*do_lo_send)(struct loop_device *, struct bio_vec *, loff_t,
|
| 346 | struct page *page);
|
| 347 | struct bio_vec *bvec;
|
| 348 | struct page *page = NULL;
|
| 349 | int i, ret = 0;
|
| 350 |
|
| 351 | do_lo_send = do_lo_send_aops;
|
| 352 | if (!(lo->lo_flags & LO_FLAGS_USE_AOPS)) {
|
| 353 | do_lo_send = do_lo_send_direct_write;
|
| 354 | if (lo->transfer != transfer_none) {
|
| 355 | page = alloc_page(GFP_NOIO | __GFP_HIGHMEM);
|
| 356 | if (unlikely(!page))
|
| 357 | goto fail;
|
| 358 | kmap(page);
|
| 359 | do_lo_send = do_lo_send_write;
|
| 360 | }
|
| 361 | }
|
| 362 | bio_for_each_segment(bvec, bio, i) {
|
| 363 | ret = do_lo_send(lo, bvec, pos, page);
|
| 364 | if (ret < 0)
|
| 365 | break;
|
| 366 | pos += bvec->bv_len;
|
| 367 | }
|
| 368 | if (page) {
|
| 369 | kunmap(page);
|
| 370 | __free_page(page);
|
| 371 | }
|
| 372 | out:
|
| 373 | return ret;
|
| 374 | fail:
|
| 375 | printk(KERN_ERR "loop: Failed to allocate temporary page for write.\n");
|
| 376 | ret = -ENOMEM;
|
| 377 | goto out;
|
| 378 | }
|
| 379 |
|
| 380 | struct lo_read_data {
|
| 381 | struct loop_device *lo;
|
| 382 | struct page *page;
|
| 383 | unsigned offset;
|
| 384 | int bsize;
|
| 385 | };
|
| 386 |
|
| 387 | static int
|
| 388 | lo_splice_actor(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
|
| 389 | struct splice_desc *sd)
|
| 390 | {
|
| 391 | struct lo_read_data *p = sd->u.data;
|
| 392 | struct loop_device *lo = p->lo;
|
| 393 | struct page *page = buf->page;
|
| 394 | sector_t IV;
|
| 395 | int size, ret;
|
| 396 |
|
| 397 | ret = buf->ops->confirm(pipe, buf);
|
| 398 | if (unlikely(ret))
|
| 399 | return ret;
|
| 400 |
|
| 401 | IV = ((sector_t) page->index << (PAGE_CACHE_SHIFT - 9)) +
|
| 402 | (buf->offset >> 9);
|
| 403 | size = sd->len;
|
| 404 | if (size > p->bsize)
|
| 405 | size = p->bsize;
|
| 406 |
|
| 407 | if (lo_do_transfer(lo, READ, page, buf->offset, p->page, p->offset, size, IV)) {
|
| 408 | printk(KERN_ERR "loop: transfer error block %ld\n",
|
| 409 | page->index);
|
| 410 | size = -EINVAL;
|
| 411 | }
|
| 412 |
|
| 413 | flush_dcache_page(p->page);
|
| 414 |
|
| 415 | if (size > 0)
|
| 416 | p->offset += size;
|
| 417 |
|
| 418 | return size;
|
| 419 | }
|
| 420 |
|
| 421 | static int
|
| 422 | lo_direct_splice_actor(struct pipe_inode_info *pipe, struct splice_desc *sd)
|
| 423 | {
|
| 424 | return __splice_from_pipe(pipe, sd, lo_splice_actor);
|
| 425 | }
|
| 426 |
|
| 427 | static int
|
| 428 | do_lo_receive(struct loop_device *lo,
|
| 429 | struct bio_vec *bvec, int bsize, loff_t pos)
|
| 430 | {
|
| 431 | struct lo_read_data cookie;
|
| 432 | struct splice_desc sd;
|
| 433 | struct file *file;
|
| 434 | long retval;
|
| 435 |
|
| 436 | cookie.lo = lo;
|
| 437 | cookie.page = bvec->bv_page;
|
| 438 | cookie.offset = bvec->bv_offset;
|
| 439 | cookie.bsize = bsize;
|
| 440 |
|
| 441 | sd.len = 0;
|
| 442 | sd.total_len = bvec->bv_len;
|
| 443 | sd.flags = 0;
|
| 444 | sd.pos = pos;
|
| 445 | sd.u.data = &cookie;
|
| 446 |
|
| 447 | file = lo->lo_backing_file;
|
| 448 | retval = splice_direct_to_actor(file, &sd, lo_direct_splice_actor);
|
| 449 |
|
| 450 | if (retval < 0)
|
| 451 | return retval;
|
| 452 |
|
| 453 | return 0;
|
| 454 | }
|
| 455 |
|
| 456 | static int
|
| 457 | lo_receive(struct loop_device *lo, struct bio *bio, int bsize, loff_t pos)
|
| 458 | {
|
| 459 | struct bio_vec *bvec;
|
| 460 | int i, ret = 0;
|
| 461 |
|
| 462 | bio_for_each_segment(bvec, bio, i) {
|
| 463 | ret = do_lo_receive(lo, bvec, bsize, pos);
|
| 464 | if (ret < 0)
|
| 465 | break;
|
| 466 | pos += bvec->bv_len;
|
| 467 | }
|
| 468 | return ret;
|
| 469 | }
|
| 470 |
|
| 471 | static int do_bio_filebacked(struct loop_device *lo, struct bio *bio)
|
| 472 | {
|
| 473 | loff_t pos;
|
| 474 | int ret;
|
| 475 |
|
| 476 | pos = ((loff_t) bio->bi_sector << 9) + lo->lo_offset;
|
| 477 |
|
| 478 | if (bio_rw(bio) == WRITE) {
|
| 479 | bool barrier = bio_rw_flagged(bio, BIO_RW_BARRIER);
|
| 480 | struct file *file = lo->lo_backing_file;
|
| 481 |
|
| 482 | if (barrier) {
|
| 483 | if (unlikely(!file->f_op->fsync)) {
|
| 484 | ret = -EOPNOTSUPP;
|
| 485 | goto out;
|
| 486 | }
|
| 487 |
|
| 488 | ret = vfs_fsync(file, 0);
|
| 489 | if (unlikely(ret)) {
|
| 490 | ret = -EIO;
|
| 491 | goto out;
|
| 492 | }
|
| 493 | }
|
| 494 |
|
| 495 | ret = lo_send(lo, bio, pos);
|
| 496 |
|
| 497 | if (barrier && !ret) {
|
| 498 | ret = vfs_fsync(file, 0);
|
| 499 | if (unlikely(ret))
|
| 500 | ret = -EIO;
|
| 501 | }
|
| 502 | } else
|
| 503 | ret = lo_receive(lo, bio, lo->lo_blocksize, pos);
|
| 504 |
|
| 505 | out:
|
| 506 | return ret;
|
| 507 | }
|
| 508 |
|
| 509 | |
| 510 | * Add bio to back of pending list
|
| 511 |
|
| 512 | static void loop_add_bio(struct loop_device *lo, struct bio *bio)
|
| 513 | {
|
| 514 | bio_list_add(&lo->lo_bio_list, bio);
|
| 515 | }
|
| 516 |
|
| 517 | |
| 518 | * Grab first pending buffer
|
| 519 |
|
| 520 | static struct bio *loop_get_bio(struct loop_device *lo)
|
| 521 | {
|
| 522 | return bio_list_pop(&lo->lo_bio_list);
|
| 523 | }
|
| 524 |
|
| 525 | static int loop_make_request(struct request_queue *q, struct bio *old_bio)
|
| 526 | {
|
| 527 | struct loop_device *lo = q->queuedata;
|
| 528 | int rw = bio_rw(old_bio);
|
| 529 |
|
| 530 | if (rw == READA)
|
| 531 | rw = READ;
|
| 532 |
|
| 533 | BUG_ON(!lo || (rw != READ && rw != WRITE));
|
| 534 |
|
| 535 | spin_lock_irq(&lo->lo_lock);
|
| 536 | if (lo->lo_state != Lo_bound)
|
| 537 | goto out;
|
| 538 | if (unlikely(rw == WRITE && (lo->lo_flags & LO_FLAGS_READ_ONLY)))
|
| 539 | goto out;
|
| 540 | loop_add_bio(lo, old_bio);
|
| 541 | wake_up(&lo->lo_event);
|
| 542 | spin_unlock_irq(&lo->lo_lock);
|
| 543 | return 0;
|
| 544 |
|
| 545 | out:
|
| 546 | spin_unlock_irq(&lo->lo_lock);
|
| 547 | bio_io_error(old_bio);
|
| 548 | return 0;
|
| 549 | }
|
| 550 |
|
| 551 | |
| 552 | * kick off io on the underlying address space
|
| 553 |
|
| 554 | static void loop_unplug(struct request_queue *q)
|
| 555 | {
|
| 556 | struct loop_device *lo = q->queuedata;
|
| 557 |
|
| 558 | queue_flag_clear_unlocked(QUEUE_FLAG_PLUGGED, q);
|
| 559 | blk_run_address_space(lo->lo_backing_file->f_mapping);
|
| 560 | }
|
| 561 |
|
| 562 | struct switch_request {
|
| 563 | struct file *file;
|
| 564 | struct completion wait;
|
| 565 | };
|
| 566 |
|
| 567 | static void do_loop_switch(struct loop_device *, struct switch_request *);
|
| 568 |
|
| 569 | static inline void loop_handle_bio(struct loop_device *lo, struct bio *bio)
|
| 570 | {
|
| 571 | if (unlikely(!bio->bi_bdev)) {
|
| 572 | do_loop_switch(lo, bio->bi_private);
|
| 573 | bio_put(bio);
|
| 574 | } else {
|
| 575 | int ret = do_bio_filebacked(lo, bio);
|
| 576 | bio_endio(bio, ret);
|
| 577 | }
|
| 578 | }
|
| 579 |
|
| 580 | |
| 581 | * worker thread that handles reads/writes to file backed loop devices,
|
| 582 | * to avoid blocking in our make_request_fn. it also does loop decrypting
|
| 583 | * on reads for block backed loop, as that is too heavy to do from
|
| 584 | * b_end_io context where irqs may be disabled.
|
| 585 | *
|
| 586 | * Loop explanation: loop_clr_fd() sets lo_state to Lo_rundown before
|
| 587 | * calling kthread_stop(). Therefore once kthread_should_stop() is
|
| 588 | * true, make_request will not place any more requests. Therefore
|
| 589 | * once kthread_should_stop() is true and lo_bio is NULL, we are
|
| 590 | * done with the loop.
|
| 591 |
|
| 592 | static int loop_thread(void *data)
|
| 593 | {
|
| 594 | struct loop_device *lo = data;
|
| 595 | struct bio *bio;
|
| 596 |
|
| 597 | set_user_nice(current, -20);
|
| 598 |
|
| 599 | while (!kthread_should_stop() || !bio_list_empty(&lo->lo_bio_list)) {
|
| 600 |
|
| 601 | wait_event_interruptible(lo->lo_event,
|
| 602 | !bio_list_empty(&lo->lo_bio_list) ||
|
| 603 | kthread_should_stop());
|
| 604 |
|
| 605 | if (bio_list_empty(&lo->lo_bio_list))
|
| 606 | continue;
|
| 607 | spin_lock_irq(&lo->lo_lock);
|
| 608 | bio = loop_get_bio(lo);
|
| 609 | spin_unlock_irq(&lo->lo_lock);
|
| 610 |
|
| 611 | BUG_ON(!bio);
|
| 612 | loop_handle_bio(lo, bio);
|
| 613 | }
|
| 614 |
|
| 615 | return 0;
|
| 616 | }
|
| 617 |
|
| 618 | |
| 619 | * loop_switch performs the hard work of switching a backing store.
|
| 620 | * First it needs to flush existing IO, it does this by sending a magic
|
| 621 | * BIO down the pipe. The completion of this BIO does the actual switch.
|
| 622 |
|
| 623 | static int loop_switch(struct loop_device *lo, struct file *file)
|
| 624 | {
|
| 625 | struct switch_request w;
|
| 626 | struct bio *bio = bio_alloc(GFP_KERNEL, 0);
|
| 627 | if (!bio)
|
| 628 | return -ENOMEM;
|
| 629 | init_completion(&w.wait);
|
| 630 | w.file = file;
|
| 631 | bio->bi_private = &w;
|
| 632 | bio->bi_bdev = NULL;
|
| 633 | loop_make_request(lo->lo_queue, bio);
|
| 634 | wait_for_completion(&w.wait);
|
| 635 | return 0;
|
| 636 | }
|
| 637 |
|
| 638 | |
| 639 | * Helper to flush the IOs in loop, but keeping loop thread running
|
| 640 |
|
| 641 | static int loop_flush(struct loop_device *lo)
|
| 642 | {
|
| 643 |
|
| 644 | if (!lo->lo_thread)
|
| 645 | return 0;
|
| 646 |
|
| 647 | return loop_switch(lo, NULL);
|
| 648 | }
|
| 649 |
|
| 650 | |
| 651 | * Do the actual switch; called from the BIO completion routine
|
| 652 |
|
| 653 | static void do_loop_switch(struct loop_device *lo, struct switch_request *p)
|
| 654 | {
|
| 655 | struct file *file = p->file;
|
| 656 | struct file *old_file = lo->lo_backing_file;
|
| 657 | struct address_space *mapping;
|
| 658 |
|
| 659 |
|
| 660 | if (!file)
|
| 661 | goto out;
|
| 662 |
|
| 663 | mapping = file->f_mapping;
|
| 664 | mapping_set_gfp_mask(old_file->f_mapping, lo->old_gfp_mask);
|
| 665 | lo->lo_backing_file = file;
|
| 666 | lo->lo_blocksize = S_ISBLK(mapping->host->i_mode) ?
|
| 667 | mapping->host->i_bdev->bd_block_size : PAGE_SIZE;
|
| 668 | lo->old_gfp_mask = mapping_gfp_mask(mapping);
|
| 669 | mapping_set_gfp_mask(mapping, lo->old_gfp_mask & ~(__GFP_IO|__GFP_FS));
|
| 670 | out:
|
| 671 | complete(&p->wait);
|
| 672 | }
|
| 673 |
|
| 674 |
|
| 675 | |
| 676 | * loop_change_fd switched the backing store of a loopback device to
|
| 677 | * a new file. This is useful for operating system installers to free up
|
| 678 | * the original file and in High Availability environments to switch to
|
| 679 | * an alternative location for the content in case of server meltdown.
|
| 680 | * This can only work if the loop device is used read-only, and if the
|
| 681 | * new backing store is the same size and type as the old backing store.
|
| 682 |
|
| 683 | static int loop_change_fd(struct loop_device *lo, struct block_device *bdev,
|
| 684 | unsigned int arg)
|
| 685 | {
|
| 686 | struct file *file, *old_file;
|
| 687 | struct inode *inode;
|
| 688 | int error;
|
| 689 |
|
| 690 | error = -ENXIO;
|
| 691 | if (lo->lo_state != Lo_bound)
|
| 692 | goto out;
|
| 693 |
|
| 694 |
|
| 695 | error = -EINVAL;
|
| 696 | if (!(lo->lo_flags & LO_FLAGS_READ_ONLY))
|
| 697 | goto out;
|
| 698 |
|
| 699 | error = -EBADF;
|
| 700 | file = fget(arg);
|
| 701 | if (!file)
|
| 702 | goto out;
|
| 703 |
|
| 704 | inode = file->f_mapping->host;
|
| 705 | old_file = lo->lo_backing_file;
|
| 706 |
|
| 707 | error = -EINVAL;
|
| 708 |
|
| 709 | if (!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode))
|
| 710 | goto out_putf;
|
| 711 |
|
| 712 |
|
| 713 | if (get_loop_size(lo, file) != get_loop_size(lo, old_file))
|
| 714 | goto out_putf;
|
| 715 |
|
| 716 |
|
| 717 | error = loop_switch(lo, file);
|
| 718 | if (error)
|
| 719 | goto out_putf;
|
| 720 |
|
| 721 | fput(old_file);
|
| 722 | if (max_part > 0)
|
| 723 | ioctl_by_bdev(bdev, BLKRRPART, 0);
|
| 724 | return 0;
|
| 725 |
|
| 726 | out_putf:
|
| 727 | fput(file);
|
| 728 | out:
|
| 729 | return error;
|
| 730 | }
|
| 731 |
|
| 732 | static inline int is_loop_device(struct file *file)
|
| 733 | {
|
| 734 | struct inode *i = file->f_mapping->host;
|
| 735 |
|
| 736 | return i && S_ISBLK(i->i_mode) && MAJOR(i->i_rdev) == LOOP_MAJOR;
|
| 737 | }
|
| 738 |
|
| 739 | static int loop_set_fd(struct loop_device *lo, fmode_t mode,
|
| 740 | struct block_device *bdev, unsigned int arg)
|
| 741 | {
|
| 742 | struct file *file, *f;
|
| 743 | struct inode *inode;
|
| 744 | struct address_space *mapping;
|
| 745 | unsigned lo_blocksize;
|
| 746 | int lo_flags = 0;
|
| 747 | int error;
|
| 748 | loff_t size;
|
| 749 |
|
| 750 |
|
| 751 | __module_get(THIS_MODULE);
|
| 752 |
|
| 753 | error = -EBADF;
|
| 754 | file = fget(arg);
|
| 755 | if (!file)
|
| 756 | goto out;
|
| 757 |
|
| 758 | error = -EBUSY;
|
| 759 | if (lo->lo_state != Lo_unbound)
|
| 760 | goto out_putf;
|
| 761 |
|
| 762 |
|
| 763 | f = file;
|
| 764 | while (is_loop_device(f)) {
|
| 765 | struct loop_device *l;
|
| 766 |
|
| 767 | if (f->f_mapping->host->i_bdev == bdev)
|
| 768 | goto out_putf;
|
| 769 |
|
| 770 | l = f->f_mapping->host->i_bdev->bd_disk->private_data;
|
| 771 | if (l->lo_state == Lo_unbound) {
|
| 772 | error = -EINVAL;
|
| 773 | goto out_putf;
|
| 774 | }
|
| 775 | f = l->lo_backing_file;
|
| 776 | }
|
| 777 |
|
| 778 | mapping = file->f_mapping;
|
| 779 | inode = mapping->host;
|
| 780 |
|
| 781 | if (!(file->f_mode & FMODE_WRITE))
|
| 782 | lo_flags |= LO_FLAGS_READ_ONLY;
|
| 783 |
|
| 784 | error = -EINVAL;
|
| 785 | if (S_ISREG(inode->i_mode) || S_ISBLK(inode->i_mode)) {
|
| 786 | const struct address_space_operations *aops = mapping->a_ops;
|
| 787 |
|
| 788 | if (aops->write_begin)
|
| 789 | lo_flags |= LO_FLAGS_USE_AOPS;
|
| 790 | if (!(lo_flags & LO_FLAGS_USE_AOPS) && !file->f_op->write)
|
| 791 | lo_flags |= LO_FLAGS_READ_ONLY;
|
| 792 |
|
| 793 | lo_blocksize = S_ISBLK(inode->i_mode) ?
|
| 794 | inode->i_bdev->bd_block_size : PAGE_SIZE;
|
| 795 |
|
| 796 | error = 0;
|
| 797 | } else {
|
| 798 | goto out_putf;
|
| 799 | }
|
| 800 |
|
| 801 | size = get_loop_size(lo, file);
|
| 802 |
|
| 803 | if ((loff_t)(sector_t)size != size) {
|
| 804 | error = -EFBIG;
|
| 805 | goto out_putf;
|
| 806 | }
|
| 807 |
|
| 808 | if (!(mode & FMODE_WRITE))
|
| 809 | lo_flags |= LO_FLAGS_READ_ONLY;
|
| 810 |
|
| 811 | set_device_ro(bdev, (lo_flags & LO_FLAGS_READ_ONLY) != 0);
|
| 812 |
|
| 813 | lo->lo_blocksize = lo_blocksize;
|
| 814 | lo->lo_device = bdev;
|
| 815 | lo->lo_flags = lo_flags;
|
| 816 | lo->lo_backing_file = file;
|
| 817 | lo->transfer = transfer_none;
|
| 818 | lo->ioctl = NULL;
|
| 819 | lo->lo_sizelimit = 0;
|
| 820 | lo->old_gfp_mask = mapping_gfp_mask(mapping);
|
| 821 | mapping_set_gfp_mask(mapping, lo->old_gfp_mask & ~(__GFP_IO|__GFP_FS));
|
| 822 |
|
| 823 | bio_list_init(&lo->lo_bio_list);
|
| 824 |
|
| 825 | |
| 826 | * set queue make_request_fn, and add limits based on lower level
|
| 827 | * device
|
| 828 |
|
| 829 | blk_queue_make_request(lo->lo_queue, loop_make_request);
|
| 830 | lo->lo_queue->queuedata = lo;
|
| 831 | lo->lo_queue->unplug_fn = loop_unplug;
|
| 832 |
|
| 833 | if (!(lo_flags & LO_FLAGS_READ_ONLY) && file->f_op->fsync)
|
| 834 | blk_queue_ordered(lo->lo_queue, QUEUE_ORDERED_DRAIN, NULL);
|
| 835 |
|
| 836 | set_capacity(lo->lo_disk, size);
|
| 837 | bd_set_size(bdev, size << 9);
|
| 838 |
|
| 839 | kobject_uevent(&disk_to_dev(bdev->bd_disk)->kobj, KOBJ_CHANGE);
|
| 840 |
|
| 841 | set_blocksize(bdev, lo_blocksize);
|
| 842 |
|
| 843 | lo->lo_thread = kthread_create(loop_thread, lo, "loop%d",
|
| 844 | lo->lo_number);
|
| 845 | if (IS_ERR(lo->lo_thread)) {
|
| 846 | error = PTR_ERR(lo->lo_thread);
|
| 847 | goto out_clr;
|
| 848 | }
|
| 849 | lo->lo_state = Lo_bound;
|
| 850 | wake_up_process(lo->lo_thread);
|
| 851 | if (max_part > 0)
|
| 852 | ioctl_by_bdev(bdev, BLKRRPART, 0);
|
| 853 | return 0;
|
| 854 |
|
| 855 | out_clr:
|
| 856 | lo->lo_thread = NULL;
|
| 857 | lo->lo_device = NULL;
|
| 858 | lo->lo_backing_file = NULL;
|
| 859 | lo->lo_flags = 0;
|
| 860 | set_capacity(lo->lo_disk, 0);
|
| 861 | invalidate_bdev(bdev);
|
| 862 | bd_set_size(bdev, 0);
|
| 863 | kobject_uevent(&disk_to_dev(bdev->bd_disk)->kobj, KOBJ_CHANGE);
|
| 864 | mapping_set_gfp_mask(mapping, lo->old_gfp_mask);
|
| 865 | lo->lo_state = Lo_unbound;
|
| 866 | out_putf:
|
| 867 | fput(file);
|
| 868 | out:
|
| 869 |
|
| 870 | module_put(THIS_MODULE);
|
| 871 | return error;
|
| 872 | }
|
| 873 |
|
| 874 | static int
|
| 875 | loop_release_xfer(struct loop_device *lo)
|
| 876 | {
|
| 877 | int err = 0;
|
| 878 | struct loop_func_table *xfer = lo->lo_encryption;
|
| 879 |
|
| 880 | if (xfer) {
|
| 881 | if (xfer->release)
|
| 882 | err = xfer->release(lo);
|
| 883 | lo->transfer = NULL;
|
| 884 | lo->lo_encryption = NULL;
|
| 885 | module_put(xfer->owner);
|
| 886 | }
|
| 887 | return err;
|
| 888 | }
|
| 889 |
|
| 890 | static int
|
| 891 | loop_init_xfer(struct loop_device *lo, struct loop_func_table *xfer,
|
| 892 | const struct loop_info64 *i)
|
| 893 | {
|
| 894 | int err = 0;
|
| 895 |
|
| 896 | if (xfer) {
|
| 897 | struct module *owner = xfer->owner;
|
| 898 |
|
| 899 | if (!try_module_get(owner))
|
| 900 | return -EINVAL;
|
| 901 | if (xfer->init)
|
| 902 | err = xfer->init(lo, i);
|
| 903 | if (err)
|
| 904 | module_put(owner);
|
| 905 | else
|
| 906 | lo->lo_encryption = xfer;
|
| 907 | }
|
| 908 | return err;
|
| 909 | }
|
| 910 |
|
| 911 | static int loop_clr_fd(struct loop_device *lo, struct block_device *bdev)
|
| 912 | {
|
| 913 | struct file *filp = lo->lo_backing_file;
|
| 914 | gfp_t gfp = lo->old_gfp_mask;
|
| 915 |
|
| 916 | if (lo->lo_state != Lo_bound)
|
| 917 | return -ENXIO;
|
| 918 |
|
| 919 | if (lo->lo_refcnt > 1)
|
| 920 | return -EBUSY;
|
| 921 |
|
| 922 | if (filp == NULL)
|
| 923 | return -EINVAL;
|
| 924 |
|
| 925 | spin_lock_irq(&lo->lo_lock);
|
| 926 | lo->lo_state = Lo_rundown;
|
| 927 | spin_unlock_irq(&lo->lo_lock);
|
| 928 |
|
| 929 | kthread_stop(lo->lo_thread);
|
| 930 |
|
| 931 | lo->lo_queue->unplug_fn = NULL;
|
| 932 | lo->lo_backing_file = NULL;
|
| 933 |
|
| 934 | loop_release_xfer(lo);
|
| 935 | lo->transfer = NULL;
|
| 936 | lo->ioctl = NULL;
|
| 937 | lo->lo_device = NULL;
|
| 938 | lo->lo_encryption = NULL;
|
| 939 | lo->lo_offset = 0;
|
| 940 | lo->lo_sizelimit = 0;
|
| 941 | lo->lo_encrypt_key_size = 0;
|
| 942 | lo->lo_flags = 0;
|
| 943 | lo->lo_thread = NULL;
|
| 944 | memset(lo->lo_encrypt_key, 0, LO_KEY_SIZE);
|
| 945 | memset(lo->lo_crypt_name, 0, LO_NAME_SIZE);
|
| 946 | memset(lo->lo_file_name, 0, LO_NAME_SIZE);
|
| 947 | if (bdev)
|
| 948 | invalidate_bdev(bdev);
|
| 949 | set_capacity(lo->lo_disk, 0);
|
| 950 | if (bdev) {
|
| 951 | bd_set_size(bdev, 0);
|
| 952 |
|
| 953 | kobject_uevent(&disk_to_dev(bdev->bd_disk)->kobj, KOBJ_CHANGE);
|
| 954 | }
|
| 955 | mapping_set_gfp_mask(filp->f_mapping, gfp);
|
| 956 | lo->lo_state = Lo_unbound;
|
| 957 |
|
| 958 | module_put(THIS_MODULE);
|
| 959 | if (max_part > 0 && bdev)
|
| 960 | ioctl_by_bdev(bdev, BLKRRPART, 0);
|
| 961 | mutex_unlock(&lo->lo_ctl_mutex);
|
| 962 | |
| 963 | * Need not hold lo_ctl_mutex to fput backing file.
|
| 964 | * Calling fput holding lo_ctl_mutex triggers a circular
|
| 965 | * lock dependency possibility warning as fput can take
|
| 966 | * bd_mutex which is usually taken before lo_ctl_mutex.
|
| 967 |
|
| 968 | fput(filp);
|
| 969 | return 0;
|
| 970 | }
|
| 971 |
|
| 972 | static int
|
| 973 | loop_set_status(struct loop_device *lo, const struct loop_info64 *info)
|
| 974 | {
|
| 975 | int err;
|
| 976 | struct loop_func_table *xfer;
|
| 977 | uid_t uid = current_uid();
|
| 978 |
|
| 979 | if (lo->lo_encrypt_key_size &&
|
| 980 | lo->lo_key_owner != uid &&
|
| 981 | !capable(CAP_SYS_ADMIN))
|
| 982 | return -EPERM;
|
| 983 | if (lo->lo_state != Lo_bound)
|
| 984 | return -ENXIO;
|
| 985 | if ((unsigned int) info->lo_encrypt_key_size > LO_KEY_SIZE)
|
| 986 | return -EINVAL;
|
| 987 |
|
| 988 | err = loop_release_xfer(lo);
|
| 989 | if (err)
|
| 990 | return err;
|
| 991 |
|
| 992 | if (info->lo_encrypt_type) {
|
| 993 | unsigned int type = info->lo_encrypt_type;
|
| 994 |
|
| 995 | if (type >= MAX_LO_CRYPT)
|
| 996 | return -EINVAL;
|
| 997 | xfer = xfer_funcs[type];
|
| 998 | if (xfer == NULL)
|
| 999 | return -EINVAL;
|
| 1000 | } else
|
| 1001 | xfer = NULL;
|
| 1002 |
|
| 1003 | err = loop_init_xfer(lo, xfer, info);
|
| 1004 | if (err)
|
| 1005 | return err;
|
| 1006 |
|
| 1007 | if (lo->lo_offset != info->lo_offset ||
|
| 1008 | lo->lo_sizelimit != info->lo_sizelimit) {
|
| 1009 | lo->lo_offset = info->lo_offset;
|
| 1010 | lo->lo_sizelimit = info->lo_sizelimit;
|
| 1011 | if (figure_loop_size(lo))
|
| 1012 | return -EFBIG;
|
| 1013 | }
|
| 1014 |
|
| 1015 | memcpy(lo->lo_file_name, info->lo_file_name, LO_NAME_SIZE);
|
| 1016 | memcpy(lo->lo_crypt_name, info->lo_crypt_name, LO_NAME_SIZE);
|
| 1017 | lo->lo_file_name[LO_NAME_SIZE-1] = 0;
|
| 1018 | lo->lo_crypt_name[LO_NAME_SIZE-1] = 0;
|
| 1019 |
|
| 1020 | if (!xfer)
|
| 1021 | xfer = &none_funcs;
|
| 1022 | lo->transfer = xfer->transfer;
|
| 1023 | lo->ioctl = xfer->ioctl;
|
| 1024 |
|
| 1025 | if ((lo->lo_flags & LO_FLAGS_AUTOCLEAR) !=
|
| 1026 | (info->lo_flags & LO_FLAGS_AUTOCLEAR))
|
| 1027 | lo->lo_flags ^= LO_FLAGS_AUTOCLEAR;
|
| 1028 |
|
| 1029 | lo->lo_encrypt_key_size = info->lo_encrypt_key_size;
|
| 1030 | lo->lo_init[0] = info->lo_init[0];
|
| 1031 | lo->lo_init[1] = info->lo_init[1];
|
| 1032 | if (info->lo_encrypt_key_size) {
|
| 1033 | memcpy(lo->lo_encrypt_key, info->lo_encrypt_key,
|
| 1034 | info->lo_encrypt_key_size);
|
| 1035 | lo->lo_key_owner = uid;
|
| 1036 | }
|
| 1037 |
|
| 1038 | return 0;
|
| 1039 | }
|
| 1040 |
|
| 1041 | static int
|
| 1042 | loop_get_status(struct loop_device *lo, struct loop_info64 *info)
|
| 1043 | {
|
| 1044 | struct file *file = lo->lo_backing_file;
|
| 1045 | struct kstat stat;
|
| 1046 | int error;
|
| 1047 |
|
| 1048 | if (lo->lo_state != Lo_bound)
|
| 1049 | return -ENXIO;
|
| 1050 | error = vfs_getattr(file->f_path.mnt, file->f_path.dentry, &stat);
|
| 1051 | if (error)
|
| 1052 | return error;
|
| 1053 | memset(info, 0, sizeof(*info));
|
| 1054 | info->lo_number = lo->lo_number;
|
| 1055 | info->lo_device = huge_encode_dev(stat.dev);
|
| 1056 | info->lo_inode = stat.ino;
|
| 1057 | info->lo_rdevice = huge_encode_dev(lo->lo_device ? stat.rdev : stat.dev);
|
| 1058 | info->lo_offset = lo->lo_offset;
|
| 1059 | info->lo_sizelimit = lo->lo_sizelimit;
|
| 1060 | info->lo_flags = lo->lo_flags;
|
| 1061 | memcpy(info->lo_file_name, lo->lo_file_name, LO_NAME_SIZE);
|
| 1062 | memcpy(info->lo_crypt_name, lo->lo_crypt_name, LO_NAME_SIZE);
|
| 1063 | info->lo_encrypt_type =
|
| 1064 | lo->lo_encryption ? lo->lo_encryption->number : 0;
|
| 1065 | if (lo->lo_encrypt_key_size && capable(CAP_SYS_ADMIN)) {
|
| 1066 | info->lo_encrypt_key_size = lo->lo_encrypt_key_size;
|
| 1067 | memcpy(info->lo_encrypt_key, lo->lo_encrypt_key,
|
| 1068 | lo->lo_encrypt_key_size);
|
| 1069 | }
|
| 1070 | return 0;
|
| 1071 | }
|
| 1072 |
|
| 1073 | static void
|
| 1074 | loop_info64_from_old(const struct loop_info *info, struct loop_info64 *info64)
|
| 1075 | {
|
| 1076 | memset(info64, 0, sizeof(*info64));
|
| 1077 | info64->lo_number = info->lo_number;
|
| 1078 | info64->lo_device = info->lo_device;
|
| 1079 | info64->lo_inode = info->lo_inode;
|
| 1080 | info64->lo_rdevice = info->lo_rdevice;
|
| 1081 | info64->lo_offset = info->lo_offset;
|
| 1082 | info64->lo_sizelimit = 0;
|
| 1083 | info64->lo_encrypt_type = info->lo_encrypt_type;
|
| 1084 | info64->lo_encrypt_key_size = info->lo_encrypt_key_size;
|
| 1085 | info64->lo_flags = info->lo_flags;
|
| 1086 | info64->lo_init[0] = info->lo_init[0];
|
| 1087 | info64->lo_init[1] = info->lo_init[1];
|
| 1088 | if (info->lo_encrypt_type == LO_CRYPT_CRYPTOAPI)
|
| 1089 | memcpy(info64->lo_crypt_name, info->lo_name, LO_NAME_SIZE);
|
| 1090 | else
|
| 1091 | memcpy(info64->lo_file_name, info->lo_name, LO_NAME_SIZE);
|
| 1092 | memcpy(info64->lo_encrypt_key, info->lo_encrypt_key, LO_KEY_SIZE);
|
| 1093 | }
|
| 1094 |
|
| 1095 | static int
|
| 1096 | loop_info64_to_old(const struct loop_info64 *info64, struct loop_info *info)
|
| 1097 | {
|
| 1098 | memset(info, 0, sizeof(*info));
|
| 1099 | info->lo_number = info64->lo_number;
|
| 1100 | info->lo_device = info64->lo_device;
|
| 1101 | info->lo_inode = info64->lo_inode;
|
| 1102 | info->lo_rdevice = info64->lo_rdevice;
|
| 1103 | info->lo_offset = info64->lo_offset;
|
| 1104 | info->lo_encrypt_type = info64->lo_encrypt_type;
|
| 1105 | info->lo_encrypt_key_size = info64->lo_encrypt_key_size;
|
| 1106 | info->lo_flags = info64->lo_flags;
|
| 1107 | info->lo_init[0] = info64->lo_init[0];
|
| 1108 | info->lo_init[1] = info64->lo_init[1];
|
| 1109 | if (info->lo_encrypt_type == LO_CRYPT_CRYPTOAPI)
|
| 1110 | memcpy(info->lo_name, info64->lo_crypt_name, LO_NAME_SIZE);
|
| 1111 | else
|
| 1112 | memcpy(info->lo_name, info64->lo_file_name, LO_NAME_SIZE);
|
| 1113 | memcpy(info->lo_encrypt_key, info64->lo_encrypt_key, LO_KEY_SIZE);
|
| 1114 |
|
| 1115 |
|
| 1116 | if (info->lo_device != info64->lo_device ||
|
| 1117 | info->lo_rdevice != info64->lo_rdevice ||
|
| 1118 | info->lo_inode != info64->lo_inode ||
|
| 1119 | info->lo_offset != info64->lo_offset)
|
| 1120 | return -EOVERFLOW;
|
| 1121 |
|
| 1122 | return 0;
|
| 1123 | }
|
| 1124 |
|
| 1125 | static int
|
| 1126 | loop_set_status_old(struct loop_device *lo, const struct loop_info __user *arg)
|
| 1127 | {
|
| 1128 | struct loop_info info;
|
| 1129 | struct loop_info64 info64;
|
| 1130 |
|
| 1131 | if (copy_from_user(&info, arg, sizeof (struct loop_info)))
|
| 1132 | return -EFAULT;
|
| 1133 | loop_info64_from_old(&info, &info64);
|
| 1134 | return loop_set_status(lo, &info64);
|
| 1135 | }
|
| 1136 |
|
| 1137 | static int
|
| 1138 | loop_set_status64(struct loop_device *lo, const struct loop_info64 __user *arg)
|
| 1139 | {
|
| 1140 | struct loop_info64 info64;
|
| 1141 |
|
| 1142 | if (copy_from_user(&info64, arg, sizeof (struct loop_info64)))
|
| 1143 | return -EFAULT;
|
| 1144 | return loop_set_status(lo, &info64);
|
| 1145 | }
|
| 1146 |
|
| 1147 | static int
|
| 1148 | loop_get_status_old(struct loop_device *lo, struct loop_info __user *arg) {
|
| 1149 | struct loop_info info;
|
| 1150 | struct loop_info64 info64;
|
| 1151 | int err = 0;
|
| 1152 |
|
| 1153 | if (!arg)
|
| 1154 | err = -EINVAL;
|
| 1155 | if (!err)
|
| 1156 | err = loop_get_status(lo, &info64);
|
| 1157 | if (!err)
|
| 1158 | err = loop_info64_to_old(&info64, &info);
|
| 1159 | if (!err && copy_to_user(arg, &info, sizeof(info)))
|
| 1160 | err = -EFAULT;
|
| 1161 |
|
| 1162 | return err;
|
| 1163 | }
|
| 1164 |
|
| 1165 | static int
|
| 1166 | loop_get_status64(struct loop_device *lo, struct loop_info64 __user *arg) {
|
| 1167 | struct loop_info64 info64;
|
| 1168 | int err = 0;
|
| 1169 |
|
| 1170 | if (!arg)
|
| 1171 | err = -EINVAL;
|
| 1172 | if (!err)
|
| 1173 | err = loop_get_status(lo, &info64);
|
| 1174 | if (!err && copy_to_user(arg, &info64, sizeof(info64)))
|
| 1175 | err = -EFAULT;
|
| 1176 |
|
| 1177 | return err;
|
| 1178 | }
|
| 1179 |
|
| 1180 | static int loop_set_capacity(struct loop_device *lo, struct block_device *bdev)
|
| 1181 | {
|
| 1182 | int err;
|
| 1183 | sector_t sec;
|
| 1184 | loff_t sz;
|
| 1185 |
|
| 1186 | err = -ENXIO;
|
| 1187 | if (unlikely(lo->lo_state != Lo_bound))
|
| 1188 | goto out;
|
| 1189 | err = figure_loop_size(lo);
|
| 1190 | if (unlikely(err))
|
| 1191 | goto out;
|
| 1192 | sec = get_capacity(lo->lo_disk);
|
| 1193 |
|
| 1194 | sz = sec;
|
| 1195 | sz <<= 9;
|
| 1196 | mutex_lock(&bdev->bd_mutex);
|
| 1197 | bd_set_size(bdev, sz);
|
| 1198 |
|
| 1199 | kobject_uevent(&disk_to_dev(bdev->bd_disk)->kobj, KOBJ_CHANGE);
|
| 1200 | mutex_unlock(&bdev->bd_mutex);
|
| 1201 |
|
| 1202 | out:
|
| 1203 | return err;
|
| 1204 | }
|
| 1205 |
|
| 1206 | static int lo_ioctl(struct block_device *bdev, fmode_t mode,
|
| 1207 | unsigned int cmd, unsigned long arg)
|
| 1208 | {
|
| 1209 | struct loop_device *lo = bdev->bd_disk->private_data;
|
| 1210 | int err;
|
| 1211 |
|
| 1212 | mutex_lock_nested(&lo->lo_ctl_mutex, 1);
|
| 1213 | switch (cmd) {
|
| 1214 | case LOOP_SET_FD:
|
| 1215 | err = loop_set_fd(lo, mode, bdev, arg);
|
| 1216 | break;
|
| 1217 | case LOOP_CHANGE_FD:
|
| 1218 | err = loop_change_fd(lo, bdev, arg);
|
| 1219 | break;
|
| 1220 | case LOOP_CLR_FD:
|
| 1221 |
|
| 1222 | err = loop_clr_fd(lo, bdev);
|
| 1223 | if (!err)
|
| 1224 | goto out_unlocked;
|
| 1225 | break;
|
| 1226 | case LOOP_SET_STATUS:
|
| 1227 | err = loop_set_status_old(lo, (struct loop_info __user *) arg);
|
| 1228 | break;
|
| 1229 | case LOOP_GET_STATUS:
|
| 1230 | err = loop_get_status_old(lo, (struct loop_info __user *) arg);
|
| 1231 | break;
|
| 1232 | case LOOP_SET_STATUS64:
|
| 1233 | err = loop_set_status64(lo, (struct loop_info64 __user *) arg);
|
| 1234 | break;
|
| 1235 | case LOOP_GET_STATUS64:
|
| 1236 | err = loop_get_status64(lo, (struct loop_info64 __user *) arg);
|
| 1237 | break;
|
| 1238 | case LOOP_SET_CAPACITY:
|
| 1239 | err = -EPERM;
|
| 1240 | if ((mode & FMODE_WRITE) || capable(CAP_SYS_ADMIN))
|
| 1241 | err = loop_set_capacity(lo, bdev);
|
| 1242 | break;
|
| 1243 | default:
|
| 1244 | err = lo->ioctl ? lo->ioctl(lo, cmd, arg) : -EINVAL;
|
| 1245 | }
|
| 1246 | mutex_unlock(&lo->lo_ctl_mutex);
|
| 1247 |
|
| 1248 | out_unlocked:
|
| 1249 | return err;
|
| 1250 | }
|
| 1251 |
|
| 1252 | #ifdef CONFIG_COMPAT
|
| 1253 | struct compat_loop_info {
|
| 1254 | compat_int_t lo_number;
|
| 1255 | compat_dev_t lo_device;
|
| 1256 | compat_ulong_t lo_inode;
|
| 1257 | compat_dev_t lo_rdevice;
|
| 1258 | compat_int_t lo_offset;
|
| 1259 | compat_int_t lo_encrypt_type;
|
| 1260 | compat_int_t lo_encrypt_key_size;
|
| 1261 | compat_int_t lo_flags;
|
| 1262 | char lo_name[LO_NAME_SIZE];
|
| 1263 | unsigned char lo_encrypt_key[LO_KEY_SIZE];
|
| 1264 | compat_ulong_t lo_init[2];
|
| 1265 | char reserved[4];
|
| 1266 | };
|
| 1267 |
|
| 1268 | |
| 1269 | * Transfer 32-bit compatibility structure in userspace to 64-bit loop info
|
| 1270 | * - noinlined to reduce stack space usage in main part of driver
|
| 1271 |
|
| 1272 | static noinline int
|
| 1273 | loop_info64_from_compat(const struct compat_loop_info __user *arg,
|
| 1274 | struct loop_info64 *info64)
|
| 1275 | {
|
| 1276 | struct compat_loop_info info;
|
| 1277 |
|
| 1278 | if (copy_from_user(&info, arg, sizeof(info)))
|
| 1279 | return -EFAULT;
|
| 1280 |
|
| 1281 | memset(info64, 0, sizeof(*info64));
|
| 1282 | info64->lo_number = info.lo_number;
|
| 1283 | info64->lo_device = info.lo_device;
|
| 1284 | info64->lo_inode = info.lo_inode;
|
| 1285 | info64->lo_rdevice = info.lo_rdevice;
|
| 1286 | info64->lo_offset = info.lo_offset;
|
| 1287 | info64->lo_sizelimit = 0;
|
| 1288 | info64->lo_encrypt_type = info.lo_encrypt_type;
|
| 1289 | info64->lo_encrypt_key_size = info.lo_encrypt_key_size;
|
| 1290 | info64->lo_flags = info.lo_flags;
|
| 1291 | info64->lo_init[0] = info.lo_init[0];
|
| 1292 | info64->lo_init[1] = info.lo_init[1];
|
| 1293 | if (info.lo_encrypt_type == LO_CRYPT_CRYPTOAPI)
|
| 1294 | memcpy(info64->lo_crypt_name, info.lo_name, LO_NAME_SIZE);
|
| 1295 | else
|
| 1296 | memcpy(info64->lo_file_name, info.lo_name, LO_NAME_SIZE);
|
| 1297 | memcpy(info64->lo_encrypt_key, info.lo_encrypt_key, LO_KEY_SIZE);
|
| 1298 | return 0;
|
| 1299 | }
|
| 1300 |
|
| 1301 | |
| 1302 | * Transfer 64-bit loop info to 32-bit compatibility structure in userspace
|
| 1303 | * - noinlined to reduce stack space usage in main part of driver
|
| 1304 |
|
| 1305 | static noinline int
|
| 1306 | loop_info64_to_compat(const struct loop_info64 *info64,
|
| 1307 | struct compat_loop_info __user *arg)
|
| 1308 | {
|
| 1309 | struct compat_loop_info info;
|
| 1310 |
|
| 1311 | memset(&info, 0, sizeof(info));
|
| 1312 | info.lo_number = info64->lo_number;
|
| 1313 | info.lo_device = info64->lo_device;
|
| 1314 | info.lo_inode = info64->lo_inode;
|
| 1315 | info.lo_rdevice = info64->lo_rdevice;
|
| 1316 | info.lo_offset = info64->lo_offset;
|
| 1317 | info.lo_encrypt_type = info64->lo_encrypt_type;
|
| 1318 | info.lo_encrypt_key_size = info64->lo_encrypt_key_size;
|
| 1319 | info.lo_flags = info64->lo_flags;
|
| 1320 | info.lo_init[0] = info64->lo_init[0];
|
| 1321 | info.lo_init[1] = info64->lo_init[1];
|
| 1322 | if (info.lo_encrypt_type == LO_CRYPT_CRYPTOAPI)
|
| 1323 | memcpy(info.lo_name, info64->lo_crypt_name, LO_NAME_SIZE);
|
| 1324 | else
|
| 1325 | memcpy(info.lo_name, info64->lo_file_name, LO_NAME_SIZE);
|
| 1326 | memcpy(info.lo_encrypt_key, info64->lo_encrypt_key, LO_KEY_SIZE);
|
| 1327 |
|
| 1328 |
|
| 1329 | if (info.lo_device != info64->lo_device ||
|
| 1330 | info.lo_rdevice != info64->lo_rdevice ||
|
| 1331 | info.lo_inode != info64->lo_inode ||
|
| 1332 | info.lo_offset != info64->lo_offset ||
|
| 1333 | info.lo_init[0] != info64->lo_init[0] ||
|
| 1334 | info.lo_init[1] != info64->lo_init[1])
|
| 1335 | return -EOVERFLOW;
|
| 1336 |
|
| 1337 | if (copy_to_user(arg, &info, sizeof(info)))
|
| 1338 | return -EFAULT;
|
| 1339 | return 0;
|
| 1340 | }
|
| 1341 |
|
| 1342 | static int
|
| 1343 | loop_set_status_compat(struct loop_device *lo,
|
| 1344 | const struct compat_loop_info __user *arg)
|
| 1345 | {
|
| 1346 | struct loop_info64 info64;
|
| 1347 | int ret;
|
| 1348 |
|
| 1349 | ret = loop_info64_from_compat(arg, &info64);
|
| 1350 | if (ret < 0)
|
| 1351 | return ret;
|
| 1352 | return loop_set_status(lo, &info64);
|
| 1353 | }
|
| 1354 |
|
| 1355 | static int
|
| 1356 | loop_get_status_compat(struct loop_device *lo,
|
| 1357 | struct compat_loop_info __user *arg)
|
| 1358 | {
|
| 1359 | struct loop_info64 info64;
|
| 1360 | int err = 0;
|
| 1361 |
|
| 1362 | if (!arg)
|
| 1363 | err = -EINVAL;
|
| 1364 | if (!err)
|
| 1365 | err = loop_get_status(lo, &info64);
|
| 1366 | if (!err)
|
| 1367 | err = loop_info64_to_compat(&info64, arg);
|
| 1368 | return err;
|
| 1369 | }
|
| 1370 |
|
| 1371 | static int lo_compat_ioctl(struct block_device *bdev, fmode_t mode,
|
| 1372 | unsigned int cmd, unsigned long arg)
|
| 1373 | {
|
| 1374 | struct loop_device *lo = bdev->bd_disk->private_data;
|
| 1375 | int err;
|
| 1376 |
|
| 1377 | switch(cmd) {
|
| 1378 | case LOOP_SET_STATUS:
|
| 1379 | mutex_lock(&lo->lo_ctl_mutex);
|
| 1380 | err = loop_set_status_compat(
|
| 1381 | lo, (const struct compat_loop_info __user *) arg);
|
| 1382 | mutex_unlock(&lo->lo_ctl_mutex);
|
| 1383 | break;
|
| 1384 | case LOOP_GET_STATUS:
|
| 1385 | mutex_lock(&lo->lo_ctl_mutex);
|
| 1386 | err = loop_get_status_compat(
|
| 1387 | lo, (struct compat_loop_info __user *) arg);
|
| 1388 | mutex_unlock(&lo->lo_ctl_mutex);
|
| 1389 | break;
|
| 1390 | case LOOP_SET_CAPACITY:
|
| 1391 | case LOOP_CLR_FD:
|
| 1392 | case LOOP_GET_STATUS64:
|
| 1393 | case LOOP_SET_STATUS64:
|
| 1394 | arg = (unsigned long) compat_ptr(arg);
|
| 1395 | case LOOP_SET_FD:
|
| 1396 | case LOOP_CHANGE_FD:
|
| 1397 | err = lo_ioctl(bdev, mode, cmd, arg);
|
| 1398 | break;
|
| 1399 | default:
|
| 1400 | err = -ENOIOCTLCMD;
|
| 1401 | break;
|
| 1402 | }
|
| 1403 | return err;
|
| 1404 | }
|
| 1405 | #endif
|
| 1406 |
|
| 1407 | static int lo_open(struct block_device *bdev, fmode_t mode)
|
| 1408 | {
|
| 1409 | struct loop_device *lo = bdev->bd_disk->private_data;
|
| 1410 |
|
| 1411 | mutex_lock(&lo->lo_ctl_mutex);
|
| 1412 | lo->lo_refcnt++;
|
| 1413 | mutex_unlock(&lo->lo_ctl_mutex);
|
| 1414 |
|
| 1415 | return 0;
|
| 1416 | }
|
| 1417 |
|
| 1418 | static int lo_release(struct gendisk *disk, fmode_t mode)
|
| 1419 | {
|
| 1420 | struct loop_device *lo = disk->private_data;
|
| 1421 | int err;
|
| 1422 |
|
| 1423 | mutex_lock(&lo->lo_ctl_mutex);
|
| 1424 |
|
| 1425 | if (--lo->lo_refcnt)
|
| 1426 | goto out;
|
| 1427 |
|
| 1428 | if (lo->lo_flags & LO_FLAGS_AUTOCLEAR) {
|
| 1429 | |
| 1430 | * In autoclear mode, stop the loop thread
|
| 1431 | * and remove configuration after last close.
|
| 1432 |
|
| 1433 | err = loop_clr_fd(lo, NULL);
|
| 1434 | if (!err)
|
| 1435 | goto out_unlocked;
|
| 1436 | } else {
|
| 1437 | |
| 1438 | * Otherwise keep thread (if running) and config,
|
| 1439 | * but flush possible ongoing bios in thread.
|
| 1440 |
|
| 1441 | loop_flush(lo);
|
| 1442 | }
|
| 1443 |
|
| 1444 | out:
|
| 1445 | mutex_unlock(&lo->lo_ctl_mutex);
|
| 1446 | out_unlocked:
|
| 1447 | return 0;
|
| 1448 | }
|
| 1449 |
|
| 1450 | static const struct block_device_operations lo_fops = {
|
| 1451 | .owner = THIS_MODULE,
|
| 1452 | .open = lo_open,
|
| 1453 | .release = lo_release,
|
| 1454 | .ioctl = lo_ioctl,
|
| 1455 | #ifdef CONFIG_COMPAT
|
| 1456 | .compat_ioctl = lo_compat_ioctl,
|
| 1457 | #endif
|
| 1458 | };
|
| 1459 |
|
| 1460 | |
| 1461 | * And now the modules code and kernel interface.
|
| 1462 |
|
| 1463 | static int max_loop;
|
| 1464 | module_param(max_loop, int, 0);
|
| 1465 | MODULE_PARM_DESC(max_loop, "Maximum number of loop devices");
|
| 1466 | module_param(max_part, int, 0);
|
| 1467 | MODULE_PARM_DESC(max_part, "Maximum number of partitions per loop device");
|
| 1468 | MODULE_LICENSE("GPL");
|
| 1469 | MODULE_ALIAS_BLOCKDEV_MAJOR(LOOP_MAJOR);
|
| 1470 |
|
| 1471 | int loop_register_transfer(struct loop_func_table *funcs)
|
| 1472 | {
|
| 1473 | unsigned int n = funcs->number;
|
| 1474 |
|
| 1475 | if (n >= MAX_LO_CRYPT || xfer_funcs[n])
|
| 1476 | return -EINVAL;
|
| 1477 | xfer_funcs[n] = funcs;
|
| 1478 | return 0;
|
| 1479 | }
|
| 1480 |
|
| 1481 | int loop_unregister_transfer(int number)
|
| 1482 | {
|
| 1483 | unsigned int n = number;
|
| 1484 | struct loop_device *lo;
|
| 1485 | struct loop_func_table *xfer;
|
| 1486 |
|
| 1487 | if (n == 0 || n >= MAX_LO_CRYPT || (xfer = xfer_funcs[n]) == NULL)
|
| 1488 | return -EINVAL;
|
| 1489 |
|
| 1490 | xfer_funcs[n] = NULL;
|
| 1491 |
|
| 1492 | list_for_each_entry(lo, &loop_devices, lo_list) {
|
| 1493 | mutex_lock(&lo->lo_ctl_mutex);
|
| 1494 |
|
| 1495 | if (lo->lo_encryption == xfer)
|
| 1496 | loop_release_xfer(lo);
|
| 1497 |
|
| 1498 | mutex_unlock(&lo->lo_ctl_mutex);
|
| 1499 | }
|
| 1500 |
|
| 1501 | return 0;
|
| 1502 | }
|
| 1503 |
|
| 1504 | EXPORT_SYMBOL(loop_register_transfer);
|
| 1505 | EXPORT_SYMBOL(loop_unregister_transfer);
|
| 1506 |
|
| 1507 | static struct loop_device *loop_alloc(int i)
|
| 1508 | {
|
| 1509 | struct loop_device *lo;
|
| 1510 | struct gendisk *disk;
|
| 1511 |
|
| 1512 | lo = kzalloc(sizeof(*lo), GFP_KERNEL);
|
| 1513 | if (!lo)
|
| 1514 | goto out;
|
| 1515 |
|
| 1516 | lo->lo_queue = blk_alloc_queue(GFP_KERNEL);
|
| 1517 | if (!lo->lo_queue)
|
| 1518 | goto out_free_dev;
|
| 1519 |
|
| 1520 | disk = lo->lo_disk = alloc_disk(1 << part_shift);
|
| 1521 | if (!disk)
|
| 1522 | goto out_free_queue;
|
| 1523 |
|
| 1524 | mutex_init(&lo->lo_ctl_mutex);
|
| 1525 | lo->lo_number = i;
|
| 1526 | lo->lo_thread = NULL;
|
| 1527 | init_waitqueue_head(&lo->lo_event);
|
| 1528 | spin_lock_init(&lo->lo_lock);
|
| 1529 | disk->major = LOOP_MAJOR;
|
| 1530 | disk->first_minor = i << part_shift;
|
| 1531 | disk->fops = &lo_fops;
|
| 1532 | disk->private_data = lo;
|
| 1533 | disk->queue = lo->lo_queue;
|
| 1534 | sprintf(disk->disk_name, "loop%d", i);
|
| 1535 | return lo;
|
| 1536 |
|
| 1537 | out_free_queue:
|
| 1538 | blk_cleanup_queue(lo->lo_queue);
|
| 1539 | out_free_dev:
|
| 1540 | kfree(lo);
|
| 1541 | out:
|
| 1542 | return NULL;
|
| 1543 | }
|
| 1544 |
|
| 1545 | static void loop_free(struct loop_device *lo)
|
| 1546 | {
|
| 1547 | blk_cleanup_queue(lo->lo_queue);
|
| 1548 | put_disk(lo->lo_disk);
|
| 1549 | list_del(&lo->lo_list);
|
| 1550 | kfree(lo);
|
| 1551 | }
|
| 1552 |
|
| 1553 | static struct loop_device *loop_init_one(int i)
|
| 1554 | {
|
| 1555 | struct loop_device *lo;
|
| 1556 |
|
| 1557 | list_for_each_entry(lo, &loop_devices, lo_list) {
|
| 1558 | if (lo->lo_number == i)
|
| 1559 | return lo;
|
| 1560 | }
|
| 1561 |
|
| 1562 | lo = loop_alloc(i);
|
| 1563 | if (lo) {
|
| 1564 | add_disk(lo->lo_disk);
|
| 1565 | list_add_tail(&lo->lo_list, &loop_devices);
|
| 1566 | }
|
| 1567 | return lo;
|
| 1568 | }
|
| 1569 |
|
| 1570 | static void loop_del_one(struct loop_device *lo)
|
| 1571 | {
|
| 1572 | del_gendisk(lo->lo_disk);
|
| 1573 | loop_free(lo);
|
| 1574 | }
|
| 1575 |
|
| 1576 | static struct kobject *loop_probe(dev_t dev, int *part, void *data)
|
| 1577 | {
|
| 1578 | struct loop_device *lo;
|
| 1579 | struct kobject *kobj;
|
| 1580 |
|
| 1581 | mutex_lock(&loop_devices_mutex);
|
| 1582 | lo = loop_init_one(dev & MINORMASK);
|
| 1583 | kobj = lo ? get_disk(lo->lo_disk) : ERR_PTR(-ENOMEM);
|
| 1584 | mutex_unlock(&loop_devices_mutex);
|
| 1585 |
|
| 1586 | *part = 0;
|
| 1587 | return kobj;
|
| 1588 | }
|
| 1589 |
|
| 1590 | static int __init loop_init(void)
|
| 1591 | {
|
| 1592 | int i, nr;
|
| 1593 | unsigned long range;
|
| 1594 | struct loop_device *lo, *next;
|
| 1595 |
|
| 1596 | |
| 1597 | * loop module now has a feature to instantiate underlying device
|
| 1598 | * structure on-demand, provided that there is an access dev node.
|
| 1599 | * However, this will not work well with user space tool that doesn't
|
| 1600 | * know about such "feature". In order to not break any existing
|
| 1601 | * tool, we do the following:
|
| 1602 | *
|
| 1603 | * (1) if max_loop is specified, create that many upfront, and this
|
| 1604 | * also becomes a hard limit.
|
| 1605 | * (2) if max_loop is not specified, create 8 loop device on module
|
| 1606 | * load, user can further extend loop device by create dev node
|
| 1607 | * themselves and have kernel automatically instantiate actual
|
| 1608 | * device on-demand.
|
| 1609 |
|
| 1610 |
|
| 1611 | part_shift = 0;
|
| 1612 | if (max_part > 0)
|
| 1613 | part_shift = fls(max_part);
|
| 1614 |
|
| 1615 | if (max_loop > 1UL << (MINORBITS - part_shift))
|
| 1616 | return -EINVAL;
|
| 1617 |
|
| 1618 | if (max_loop) {
|
| 1619 | nr = max_loop;
|
| 1620 | range = max_loop;
|
| 1621 | } else {
|
| 1622 | nr = 8;
|
| 1623 | range = 1UL << (MINORBITS - part_shift);
|
| 1624 | }
|
| 1625 |
|
| 1626 | if (register_blkdev(LOOP_MAJOR, "loop"))
|
| 1627 | return -EIO;
|
| 1628 |
|
| 1629 | for (i = 0; i < nr; i++) {
|
| 1630 | lo = loop_alloc(i);
|
| 1631 | if (!lo)
|
| 1632 | goto Enomem;
|
| 1633 | list_add_tail(&lo->lo_list, &loop_devices);
|
| 1634 | }
|
| 1635 |
|
| 1636 |
|
| 1637 |
|
| 1638 | list_for_each_entry(lo, &loop_devices, lo_list)
|
| 1639 | add_disk(lo->lo_disk);
|
| 1640 |
|
| 1641 | blk_register_region(MKDEV(LOOP_MAJOR, 0), range,
|
| 1642 | THIS_MODULE, loop_probe, NULL, NULL);
|
| 1643 |
|
| 1644 | printk(KERN_INFO "loop: module loaded\n");
|
| 1645 | return 0;
|
| 1646 |
|
| 1647 | Enomem:
|
| 1648 | printk(KERN_INFO "loop: out of memory\n");
|
| 1649 |
|
| 1650 | list_for_each_entry_safe(lo, next, &loop_devices, lo_list)
|
| 1651 | loop_free(lo);
|
| 1652 |
|
| 1653 | unregister_blkdev(LOOP_MAJOR, "loop");
|
| 1654 | return -ENOMEM;
|
| 1655 | }
|
| 1656 |
|
| 1657 | static void __exit loop_exit(void)
|
| 1658 | {
|
| 1659 | unsigned long range;
|
| 1660 | struct loop_device *lo, *next;
|
| 1661 |
|
| 1662 | range = max_loop ? max_loop : 1UL << (MINORBITS - part_shift);
|
| 1663 |
|
| 1664 | list_for_each_entry_safe(lo, next, &loop_devices, lo_list)
|
| 1665 | loop_del_one(lo);
|
| 1666 |
|
| 1667 | blk_unregister_region(MKDEV(LOOP_MAJOR, 0), range);
|
| 1668 | unregister_blkdev(LOOP_MAJOR, "loop");
|
| 1669 | }
|
| 1670 |
|
| 1671 | module_init(loop_init);
|
| 1672 | module_exit(loop_exit);
|
| 1673 |
|
| 1674 | #ifndef MODULE
|
| 1675 | static int __init max_loop_setup(char *str)
|
| 1676 | {
|
| 1677 | max_loop = simple_strtol(str, NULL, 0);
|
| 1678 | return 1;
|
| 1679 | }
|
| 1680 |
|
| 1681 | __setup("max_loop=", max_loop_setup);
|
| 1682 | #endif
|