projects/linux·blob v5.2-rc7 · refs

336 lines · 10.8 KiB

1/* SPDX-License-Identifier: GPL-2.0+ */
2/*
3 * ipmi.h
4 *
5 * MontaVista IPMI interface
6 *
7 * Author: MontaVista Software, Inc.
8 * Corey Minyard <[email protected]>
9 * [email protected]
10 *
11 * Copyright 2002 MontaVista Software Inc.
12 *
13 */
14#ifndef __LINUX_IPMI_H
15#define __LINUX_IPMI_H
16
17#include <uapi/linux/ipmi.h>
18
19#include <linux/list.h>
20#include <linux/proc_fs.h>
21#include <linux/acpi.h> /* For acpi_handle */
22
23struct module;
24struct device;
25
26/*
27 * Opaque type for a IPMI message user. One of these is needed to
28 * send and receive messages.
29 */
30struct ipmi_user;
31
32/*
33 * Stuff coming from the receive interface comes as one of these.
34 * They are allocated, the receiver must free them with
35 * ipmi_free_recv_msg() when done with the message. The link is not
36 * used after the message is delivered, so the upper layer may use the
37 * link to build a linked list, if it likes.
38 */
39struct ipmi_recv_msg {
40 struct list_head link;
41
42 /*
43 * The type of message as defined in the "Receive Types"
44 * defines above.
45 */
46 int recv_type;
47
48 struct ipmi_user *user;
49 struct ipmi_addr addr;
50 long msgid;
51 struct kernel_ipmi_msg msg;
52
53 /*
54 * The user_msg_data is the data supplied when a message was
55 * sent, if this is a response to a sent message. If this is
56 * not a response to a sent message, then user_msg_data will
57 * be NULL. If the user above is NULL, then this will be the
58 * intf.
59 */
60 void *user_msg_data;
61
62 /*
63 * Call this when done with the message. It will presumably free
64 * the message and do any other necessary cleanup.
65 */
66 void (*done)(struct ipmi_recv_msg *msg);
67
68 /*
69 * Place-holder for the data, don't make any assumptions about
70 * the size or existence of this, since it may change.
71 */
72 unsigned char msg_data[IPMI_MAX_MSG_LENGTH];
73};
74
75/* Allocate and free the receive message. */
76void ipmi_free_recv_msg(struct ipmi_recv_msg *msg);
77
78struct ipmi_user_hndl {
79 /*
80 * Routine type to call when a message needs to be routed to
81 * the upper layer. This will be called with some locks held,
82 * the only IPMI routines that can be called are ipmi_request
83 * and the alloc/free operations. The handler_data is the
84 * variable supplied when the receive handler was registered.
85 */
86 void (*ipmi_recv_hndl)(struct ipmi_recv_msg *msg,
87 void *user_msg_data);
88
89 /*
90 * Called when the interface detects a watchdog pre-timeout. If
91 * this is NULL, it will be ignored for the user.
92 */
93 void (*ipmi_watchdog_pretimeout)(void *handler_data);
94
95 /*
96 * If not NULL, called at panic time after the interface has
97 * been set up to handle run to completion.
98 */
99 void (*ipmi_panic_handler)(void *handler_data);
100
101 /*
102 * Called when the interface has been removed. After this returns
103 * the user handle will be invalid. The interface may or may
104 * not be usable when this is called, but it will return errors
105 * if it is not usable.
106 */
107 void (*shutdown)(void *handler_data);
108};
109
110/* Create a new user of the IPMI layer on the given interface number. */
111int ipmi_create_user(unsigned int if_num,
112 const struct ipmi_user_hndl *handler,
113 void *handler_data,
114 struct ipmi_user **user);
115
116/*
117 * Destroy the given user of the IPMI layer. Note that after this
118 * function returns, the system is guaranteed to not call any
119 * callbacks for the user. Thus as long as you destroy all the users
120 * before you unload a module, you will be safe. And if you destroy
121 * the users before you destroy the callback structures, it should be
122 * safe, too.
123 */
124int ipmi_destroy_user(struct ipmi_user *user);
125
126/* Get the IPMI version of the BMC we are talking to. */
127int ipmi_get_version(struct ipmi_user *user,
128 unsigned char *major,
129 unsigned char *minor);
130
131/*
132 * Set and get the slave address and LUN that we will use for our
133 * source messages. Note that this affects the interface, not just
134 * this user, so it will affect all users of this interface. This is
135 * so some initialization code can come in and do the OEM-specific
136 * things it takes to determine your address (if not the BMC) and set
137 * it for everyone else. Note that each channel can have its own
138 * address.
139 */
140int ipmi_set_my_address(struct ipmi_user *user,
141 unsigned int channel,
142 unsigned char address);
143int ipmi_get_my_address(struct ipmi_user *user,
144 unsigned int channel,
145 unsigned char *address);
146int ipmi_set_my_LUN(struct ipmi_user *user,
147 unsigned int channel,
148 unsigned char LUN);
149int ipmi_get_my_LUN(struct ipmi_user *user,
150 unsigned int channel,
151 unsigned char *LUN);
152
153/*
154 * Like ipmi_request, but lets you specify the number of retries and
155 * the retry time. The retries is the number of times the message
156 * will be resent if no reply is received. If set to -1, the default
157 * value will be used. The retry time is the time in milliseconds
158 * between retries. If set to zero, the default value will be
159 * used.
160 *
161 * Don't use this unless you *really* have to. It's primarily for the
162 * IPMI over LAN converter; since the LAN stuff does its own retries,
163 * it makes no sense to do it here. However, this can be used if you
164 * have unusual requirements.
165 */
166int ipmi_request_settime(struct ipmi_user *user,
167 struct ipmi_addr *addr,
168 long msgid,
169 struct kernel_ipmi_msg *msg,
170 void *user_msg_data,
171 int priority,
172 int max_retries,
173 unsigned int retry_time_ms);
174
175/*
176 * Like ipmi_request, but with messages supplied. This will not
177 * allocate any memory, and the messages may be statically allocated
178 * (just make sure to do the "done" handling on them). Note that this
179 * is primarily for the watchdog timer, since it should be able to
180 * send messages even if no memory is available. This is subject to
181 * change as the system changes, so don't use it unless you REALLY
182 * have to.
183 */
184int ipmi_request_supply_msgs(struct ipmi_user *user,
185 struct ipmi_addr *addr,
186 long msgid,
187 struct kernel_ipmi_msg *msg,
188 void *user_msg_data,
189 void *supplied_smi,
190 struct ipmi_recv_msg *supplied_recv,
191 int priority);
192
193/*
194 * Poll the IPMI interface for the user. This causes the IPMI code to
195 * do an immediate check for information from the driver and handle
196 * anything that is immediately pending. This will not block in any
197 * way. This is useful if you need to spin waiting for something to
198 * happen in the IPMI driver.
199 */
200void ipmi_poll_interface(struct ipmi_user *user);
201
202/*
203 * When commands come in to the SMS, the user can register to receive
204 * them. Only one user can be listening on a specific netfn/cmd/chan tuple
205 * at a time, you will get an EBUSY error if the command is already
206 * registered. If a command is received that does not have a user
207 * registered, the driver will automatically return the proper
208 * error. Channels are specified as a bitfield, use IPMI_CHAN_ALL to
209 * mean all channels.
210 */
211int ipmi_register_for_cmd(struct ipmi_user *user,
212 unsigned char netfn,
213 unsigned char cmd,
214 unsigned int chans);
215int ipmi_unregister_for_cmd(struct ipmi_user *user,
216 unsigned char netfn,
217 unsigned char cmd,
218 unsigned int chans);
219
220/*
221 * Go into a mode where the driver will not autonomously attempt to do
222 * things with the interface. It will still respond to attentions and
223 * interrupts, and it will expect that commands will complete. It
224 * will not automatcially check for flags, events, or things of that
225 * nature.
226 *
227 * This is primarily used for firmware upgrades. The idea is that
228 * when you go into firmware upgrade mode, you do this operation
229 * and the driver will not attempt to do anything but what you tell
230 * it or what the BMC asks for.
231 *
232 * Note that if you send a command that resets the BMC, the driver
233 * will still expect a response from that command. So the BMC should
234 * reset itself *after* the response is sent. Resetting before the
235 * response is just silly.
236 *
237 * If in auto maintenance mode, the driver will automatically go into
238 * maintenance mode for 30 seconds if it sees a cold reset, a warm
239 * reset, or a firmware NetFN. This means that code that uses only
240 * firmware NetFN commands to do upgrades will work automatically
241 * without change, assuming it sends a message every 30 seconds or
242 * less.
243 *
244 * See the IPMI_MAINTENANCE_MODE_xxx defines for what the mode means.
245 */
246int ipmi_get_maintenance_mode(struct ipmi_user *user);
247int ipmi_set_maintenance_mode(struct ipmi_user *user, int mode);
248
249/*
250 * When the user is created, it will not receive IPMI events by
251 * default. The user must set this to TRUE to get incoming events.
252 * The first user that sets this to TRUE will receive all events that
253 * have been queued while no one was waiting for events.
254 */
255int ipmi_set_gets_events(struct ipmi_user *user, bool val);
256
257/*
258 * Called when a new SMI is registered. This will also be called on
259 * every existing interface when a new watcher is registered with
260 * ipmi_smi_watcher_register().
261 */
262struct ipmi_smi_watcher {
263 struct list_head link;
264
265 /*
266 * You must set the owner to the current module, if you are in
267 * a module (generally just set it to "THIS_MODULE").
268 */
269 struct module *owner;
270
271 /*
272 * These two are called with read locks held for the interface
273 * the watcher list. So you can add and remove users from the
274 * IPMI interface, send messages, etc., but you cannot add
275 * or remove SMI watchers or SMI interfaces.
276 */
277 void (*new_smi)(int if_num, struct device *dev);
278 void (*smi_gone)(int if_num);
279};
280
281int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher);
282int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher);
283
284/*
285 * The following are various helper functions for dealing with IPMI
286 * addresses.
287 */
288
289/* Return the maximum length of an IPMI address given it's type. */
290unsigned int ipmi_addr_length(int addr_type);
291
292/* Validate that the given IPMI address is valid. */
293int ipmi_validate_addr(struct ipmi_addr *addr, int len);
294
295/*
296 * How did the IPMI driver find out about the device?
297 */
298enum ipmi_addr_src {
299 SI_INVALID = 0, SI_HOTMOD, SI_HARDCODED, SI_SPMI, SI_ACPI, SI_SMBIOS,
300 SI_PCI, SI_DEVICETREE, SI_PLATFORM, SI_LAST
301};
302const char *ipmi_addr_src_to_str(enum ipmi_addr_src src);
303
304union ipmi_smi_info_union {
305#ifdef CONFIG_ACPI
306 /*
307 * the acpi_info element is defined for the SI_ACPI
308 * address type
309 */
310 struct {
311 acpi_handle acpi_handle;
312 } acpi_info;
313#endif
314};
315
316struct ipmi_smi_info {
317 enum ipmi_addr_src addr_src;
318
319 /*
320 * Base device for the interface. Don't forget to put this when
321 * you are done.
322 */
323 struct device *dev;
324
325 /*
326 * The addr_info provides more detailed info for some IPMI
327 * devices, depending on the addr_src. Currently only SI_ACPI
328 * info is provided.
329 */
330 union ipmi_smi_info_union addr_info;
331};
332
333/* This is to get the private info of struct ipmi_smi */
334extern int ipmi_get_smi_info(int if_num, struct ipmi_smi_info *data);
335
336#endif /* __LINUX_IPMI_H */