projects/linux·blob v5.8 · refs

318 lines · 9.6 KiB

1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * External Connector (extcon) framework
4 * - linux/include/linux/extcon.h for extcon consumer device driver.
5 *
6 * Copyright (C) 2015 Samsung Electronics
7 * Author: Chanwoo Choi <[email protected]>
8 *
9 * Copyright (C) 2012 Samsung Electronics
10 * Author: Donggeun Kim <[email protected]>
11 * Author: MyungJoo Ham <[email protected]>
12 *
13 * based on switch class driver
14 * Copyright (C) 2008 Google, Inc.
15 * Author: Mike Lockwood <[email protected]>
16 */
17
18#ifndef __LINUX_EXTCON_H__
19#define __LINUX_EXTCON_H__
20
21#include <linux/device.h>
22
23/*
24 * Define the type of supported external connectors
25 */
26#define EXTCON_TYPE_USB BIT(0) /* USB connector */
27#define EXTCON_TYPE_CHG BIT(1) /* Charger connector */
28#define EXTCON_TYPE_JACK BIT(2) /* Jack connector */
29#define EXTCON_TYPE_DISP BIT(3) /* Display connector */
30#define EXTCON_TYPE_MISC BIT(4) /* Miscellaneous connector */
31
32/*
33 * Define the unique id of supported external connectors
34 */
35#define EXTCON_NONE 0
36
37/* USB external connector */
38#define EXTCON_USB 1
39#define EXTCON_USB_HOST 2
40
41/*
42 * Charging external connector
43 *
44 * When one SDP charger connector was reported, we should also report
45 * the USB connector, which means EXTCON_CHG_USB_SDP should always
46 * appear together with EXTCON_USB. The same as ACA charger connector,
47 * EXTCON_CHG_USB_ACA would normally appear with EXTCON_USB_HOST.
48 *
49 * The EXTCON_CHG_USB_SLOW connector can provide at least 500mA of
50 * current at 5V. The EXTCON_CHG_USB_FAST connector can provide at
51 * least 1A of current at 5V.
52 */
53#define EXTCON_CHG_USB_SDP 5 /* Standard Downstream Port */
54#define EXTCON_CHG_USB_DCP 6 /* Dedicated Charging Port */
55#define EXTCON_CHG_USB_CDP 7 /* Charging Downstream Port */
56#define EXTCON_CHG_USB_ACA 8 /* Accessory Charger Adapter */
57#define EXTCON_CHG_USB_FAST 9
58#define EXTCON_CHG_USB_SLOW 10
59#define EXTCON_CHG_WPT 11 /* Wireless Power Transfer */
60#define EXTCON_CHG_USB_PD 12 /* USB Power Delivery */
61
62/* Jack external connector */
63#define EXTCON_JACK_MICROPHONE 20
64#define EXTCON_JACK_HEADPHONE 21
65#define EXTCON_JACK_LINE_IN 22
66#define EXTCON_JACK_LINE_OUT 23
67#define EXTCON_JACK_VIDEO_IN 24
68#define EXTCON_JACK_VIDEO_OUT 25
69#define EXTCON_JACK_SPDIF_IN 26 /* Sony Philips Digital InterFace */
70#define EXTCON_JACK_SPDIF_OUT 27
71
72/* Display external connector */
73#define EXTCON_DISP_HDMI 40 /* High-Definition Multimedia Interface */
74#define EXTCON_DISP_MHL 41 /* Mobile High-Definition Link */
75#define EXTCON_DISP_DVI 42 /* Digital Visual Interface */
76#define EXTCON_DISP_VGA 43 /* Video Graphics Array */
77#define EXTCON_DISP_DP 44 /* Display Port */
78#define EXTCON_DISP_HMD 45 /* Head-Mounted Display */
79
80/* Miscellaneous external connector */
81#define EXTCON_DOCK 60
82#define EXTCON_JIG 61
83#define EXTCON_MECHANICAL 62
84
85#define EXTCON_NUM 63
86
87/*
88 * Define the properties of supported external connectors.
89 *
90 * When adding the new extcon property, they *must* have
91 * the type/value/default information. Also, you *have to*
92 * modify the EXTCON_PROP_[type]_START/END definitions
93 * which mean the range of the supported properties
94 * for each extcon type.
95 *
96 * The naming style of property
97 * : EXTCON_PROP_[type]_[property name]
98 *
99 * EXTCON_PROP_USB_[property name] : USB property
100 * EXTCON_PROP_CHG_[property name] : Charger property
101 * EXTCON_PROP_JACK_[property name] : Jack property
102 * EXTCON_PROP_DISP_[property name] : Display property
103 */
104
105/*
106 * Properties of EXTCON_TYPE_USB.
107 *
108 * - EXTCON_PROP_USB_VBUS
109 * @type: integer (intval)
110 * @value: 0 (low) or 1 (high)
111 * @default: 0 (low)
112 * - EXTCON_PROP_USB_TYPEC_POLARITY
113 * @type: integer (intval)
114 * @value: 0 (normal) or 1 (flip)
115 * @default: 0 (normal)
116 * - EXTCON_PROP_USB_SS (SuperSpeed)
117 * @type: integer (intval)
118 * @value: 0 (USB/USB2) or 1 (USB3)
119 * @default: 0 (USB/USB2)
120 *
121 */
122#define EXTCON_PROP_USB_VBUS 0
123#define EXTCON_PROP_USB_TYPEC_POLARITY 1
124#define EXTCON_PROP_USB_SS 2
125
126#define EXTCON_PROP_USB_MIN 0
127#define EXTCON_PROP_USB_MAX 2
128#define EXTCON_PROP_USB_CNT (EXTCON_PROP_USB_MAX - EXTCON_PROP_USB_MIN + 1)
129
130/* Properties of EXTCON_TYPE_CHG. */
131#define EXTCON_PROP_CHG_MIN 50
132#define EXTCON_PROP_CHG_MAX 50
133#define EXTCON_PROP_CHG_CNT (EXTCON_PROP_CHG_MAX - EXTCON_PROP_CHG_MIN + 1)
134
135/* Properties of EXTCON_TYPE_JACK. */
136#define EXTCON_PROP_JACK_MIN 100
137#define EXTCON_PROP_JACK_MAX 100
138#define EXTCON_PROP_JACK_CNT (EXTCON_PROP_JACK_MAX - EXTCON_PROP_JACK_MIN + 1)
139
140/*
141 * Properties of EXTCON_TYPE_DISP.
142 *
143 * - EXTCON_PROP_DISP_HPD (Hot Plug Detect)
144 * @type: integer (intval)
145 * @value: 0 (no hpd) or 1 (hpd)
146 * @default: 0 (no hpd)
147 *
148 */
149#define EXTCON_PROP_DISP_HPD 150
150
151/* Properties of EXTCON_TYPE_DISP. */
152#define EXTCON_PROP_DISP_MIN 150
153#define EXTCON_PROP_DISP_MAX 151
154#define EXTCON_PROP_DISP_CNT (EXTCON_PROP_DISP_MAX - EXTCON_PROP_DISP_MIN + 1)
155
156/*
157 * Define the type of property's value.
158 *
159 * Define the property's value as union type. Because each property
160 * would need the different data type to store it.
161 */
162union extcon_property_value {
163 int intval; /* type : integer (intval) */
164};
165
166struct extcon_dev;
167
168#if IS_ENABLED(CONFIG_EXTCON)
169/*
170 * Following APIs get the connected state of each external connector.
171 * The 'id' argument indicates the defined external connector.
172 */
173int extcon_get_state(struct extcon_dev *edev, unsigned int id);
174
175/*
176 * Following APIs get the property of each external connector.
177 * The 'id' argument indicates the defined external connector
178 * and the 'prop' indicates the extcon property.
179 *
180 * And extcon_get_property_capability() get the capability of the property
181 * for each external connector. They are used to get the capability of the
182 * property of each external connector based on the id and property.
183 */
184int extcon_get_property(struct extcon_dev *edev, unsigned int id,
185 unsigned int prop,
186 union extcon_property_value *prop_val);
187int extcon_get_property_capability(struct extcon_dev *edev,
188 unsigned int id, unsigned int prop);
189
190/*
191 * Following APIs register the notifier block in order to detect
192 * the change of both state and property value for each external connector.
193 *
194 * extcon_register_notifier(*edev, id, *nb) : Register a notifier block
195 * for specific external connector of the extcon.
196 * extcon_register_notifier_all(*edev, *nb) : Register a notifier block
197 * for all supported external connectors of the extcon.
198 */
199int extcon_register_notifier(struct extcon_dev *edev, unsigned int id,
200 struct notifier_block *nb);
201int extcon_unregister_notifier(struct extcon_dev *edev, unsigned int id,
202 struct notifier_block *nb);
203int devm_extcon_register_notifier(struct device *dev,
204 struct extcon_dev *edev, unsigned int id,
205 struct notifier_block *nb);
206void devm_extcon_unregister_notifier(struct device *dev,
207 struct extcon_dev *edev, unsigned int id,
208 struct notifier_block *nb);
209
210int extcon_register_notifier_all(struct extcon_dev *edev,
211 struct notifier_block *nb);
212int extcon_unregister_notifier_all(struct extcon_dev *edev,
213 struct notifier_block *nb);
214int devm_extcon_register_notifier_all(struct device *dev,
215 struct extcon_dev *edev,
216 struct notifier_block *nb);
217void devm_extcon_unregister_notifier_all(struct device *dev,
218 struct extcon_dev *edev,
219 struct notifier_block *nb);
220
221/*
222 * Following APIs get the extcon_dev from devicetree or by through extcon name.
223 */
224struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name);
225struct extcon_dev *extcon_find_edev_by_node(struct device_node *node);
226struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev,
227 int index);
228
229/* Following API get the name of extcon device. */
230const char *extcon_get_edev_name(struct extcon_dev *edev);
231
232#else /* CONFIG_EXTCON */
233static inline int extcon_get_state(struct extcon_dev *edev, unsigned int id)
234{
235 return 0;
236}
237
238static inline int extcon_get_property(struct extcon_dev *edev, unsigned int id,
239 unsigned int prop,
240 union extcon_property_value *prop_val)
241{
242 return 0;
243}
244
245static inline int extcon_get_property_capability(struct extcon_dev *edev,
246 unsigned int id, unsigned int prop)
247{
248 return 0;
249}
250
251static inline int extcon_register_notifier(struct extcon_dev *edev,
252 unsigned int id, struct notifier_block *nb)
253{
254 return 0;
255}
256
257static inline int extcon_unregister_notifier(struct extcon_dev *edev,
258 unsigned int id, struct notifier_block *nb)
259{
260 return 0;
261}
262
263static inline int devm_extcon_register_notifier(struct device *dev,
264 struct extcon_dev *edev, unsigned int id,
265 struct notifier_block *nb)
266{
267 return -ENOSYS;
268}
269
270static inline void devm_extcon_unregister_notifier(struct device *dev,
271 struct extcon_dev *edev, unsigned int id,
272 struct notifier_block *nb) { }
273
274static inline struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
275{
276 return ERR_PTR(-ENODEV);
277}
278
279static inline struct extcon_dev *extcon_find_edev_by_node(struct device_node *node)
280{
281 return ERR_PTR(-ENODEV);
282}
283
284static inline struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev,
285 int index)
286{
287 return ERR_PTR(-ENODEV);
288}
289
290static inline const char *extcon_get_edev_name(struct extcon_dev *edev)
291{
292 return NULL;
293}
294#endif /* CONFIG_EXTCON */
295
296/*
297 * Following structure and API are deprecated. EXTCON remains the function
298 * definition to prevent the build break.
299 */
300struct extcon_specific_cable_nb {
301 struct notifier_block *user_nb;
302 int cable_index;
303 struct extcon_dev *edev;
304 unsigned long previous_value;
305};
306
307static inline int extcon_register_interest(struct extcon_specific_cable_nb *obj,
308 const char *extcon_name, const char *cable_name,
309 struct notifier_block *nb)
310{
311 return -EINVAL;
312}
313
314static inline int extcon_unregister_interest(struct extcon_specific_cable_nb *obj)
315{
316 return -EINVAL;
317}
318#endif /* __LINUX_EXTCON_H__ */