diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
deleted file mode 100644
index b9f58e4..0000000
--- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
+++ /dev/null
@@ -1,117 +0,0 @@
-ACT88xx regulators
--------------------
-
-Required properties:
-- compatible: "active-semi,act8846" or "active-semi,act8865" or "active-semi,act8600"
-- reg: I2C slave address
-
-Optional properties:
-- system-power-controller: Telling whether or not this pmic is controlling
-  the system power. See Documentation/devicetree/bindings/power/power-controller.txt .
-- active-semi,vsel-high: Indicates the VSEL pin is high.
-  If this property is missing, assume the VSEL pin is low(0).
-
-Optional input supply properties:
-- for act8600:
-  - vp1-supply: The input supply for DCDC_REG1
-  - vp2-supply: The input supply for DCDC_REG2
-  - vp3-supply: The input supply for DCDC_REG3
-  - inl-supply: The input supply for LDO_REG5, LDO_REG6, LDO_REG7 and LDO_REG8
-  SUDCDC_REG4, LDO_REG9 and LDO_REG10 do not have separate supplies.
-- for act8846:
-  - vp1-supply: The input supply for REG1
-  - vp2-supply: The input supply for REG2
-  - vp3-supply: The input supply for REG3
-  - vp4-supply: The input supply for REG4
-  - inl1-supply: The input supply for REG5, REG6 and REG7
-  - inl2-supply: The input supply for REG8 and LDO_REG9
-  - inl3-supply: The input supply for REG10, REG11 and REG12
-- for act8865:
-  - vp1-supply: The input supply for DCDC_REG1
-  - vp2-supply: The input supply for DCDC_REG2
-  - vp3-supply: The input supply for DCDC_REG3
-  - inl45-supply: The input supply for LDO_REG1 and LDO_REG2
-  - inl67-supply: The input supply for LDO_REG3 and LDO_REG4
-
-Any standard regulator properties can be used to configure the single regulator.
-regulator-initial-mode, regulator-allowed-modes and regulator-mode could be specified
-for act8865 using mode values from dt-bindings/regulator/active-semi,8865-regulator.h
-file.
-
-The valid names for regulators are:
-	- for act8846:
-	REG1, REG2, REG3, REG4, REG5, REG6, REG7, REG8, REG9, REG10, REG11, REG12
-	- for act8865:
-	DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4.
-	- for act8600:
-	DCDC_REG1, DCDC_REG2, DCDC_REG3, SUDCDC_REG4, LDO_REG5, LDO_REG6, LDO_REG7,
-	LDO_REG8, LDO_REG9, LDO_REG10,
-
-Example:
---------
-
-#include <dt-bindings/regulator/active-semi,8865-regulator.h>
-
-		i2c1: i2c@f0018000 {
-			pmic: act8865@5b {
-				compatible = "active-semi,act8865";
-				reg = <0x5b>;
-				active-semi,vsel-high;
-
-				regulators {
-					vcc_1v8_reg: DCDC_REG1 {
-						regulator-name = "VCC_1V8";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-					};
-
-					vcc_1v2_reg: DCDC_REG2 {
-						regulator-name = "VCC_1V2";
-						regulator-min-microvolt = <1100000>;
-						regulator-max-microvolt = <1300000>;
-						regulator-always-on;
-
-						regulator-allowed-modes = <ACT8865_REGULATOR_MODE_FIXED>,
-									  <ACT8865_REGULATOR_MODE_LOWPOWER>;
-						regulator-initial-mode = <ACT8865_REGULATOR_MODE_FIXED>;
-
-						regulator-state-mem {
-							regulator-on-in-suspend;
-							regulator-suspend-min-microvolt = <1150000>;
-							regulator-suspend-max-microvolt = <1150000>;
-							regulator-changeable-in-suspend;
-							regulator-mode = <ACT8865_REGULATOR_MODE_LOWPOWER>;
-						};
-					};
-
-					vcc_3v3_reg: DCDC_REG3 {
-						regulator-name = "VCC_3V3";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-					};
-
-					vddana_reg: LDO_REG1 {
-						regulator-name = "VDDANA";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-
-						regulator-allowed-modes = <ACT8865_REGULATOR_MODE_NORMAL>,
-									  <ACT8865_REGULATOR_MODE_LOWPOWER>;
-						regulator-initial-mode = <ACT8865_REGULATOR_MODE_NORMAL>;
-
-						regulator-state-mem {
-							regulator-off-in-suspend;
-						};
-					};
-
-					vddfuse_reg: LDO_REG2 {
-						regulator-name = "FUSE_2V5";
-						regulator-min-microvolt = <2500000>;
-						regulator-max-microvolt = <2500000>;
-					};
-				};
-			};
-		};
diff --git a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt
deleted file mode 100644
index 4017527..0000000
--- a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt
+++ /dev/null
@@ -1,113 +0,0 @@
-Device-Tree bindings for regulators of Active-semi ACT8945A Multi-Function Device
-
-Required properties:
- - compatible: "active-semi,act8945a", please refer to ../mfd/act8945a.txt.
-
-Optional properties:
-- active-semi,vsel-high: Indicates if the VSEL pin is set to logic-high.
-  If this property is missing, assume the VSEL pin is set to logic-low.
-
-Optional input supply properties:
-  - vp1-supply: The input supply for REG_DCDC1
-  - vp2-supply: The input supply for REG_DCDC2
-  - vp3-supply: The input supply for REG_DCDC3
-  - inl45-supply: The input supply for REG_LDO1 and REG_LDO2
-  - inl67-supply: The input supply for REG_LDO3 and REG_LDO4
-
-Any standard regulator properties can be used to configure the single regulator.
-regulator-initial-mode, regulator-allowed-modes and regulator-mode could be
-specified using mode values from dt-bindings/regulator/active-semi,8945a-regulator.h
-file.
-
-The valid names for regulators are:
-	REG_DCDC1, REG_DCDC2, REG_DCDC3, REG_LDO1, REG_LDO2, REG_LDO3, REG_LDO4.
-
-Example:
-
-#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
-
-	pmic@5b {
-		compatible = "active-semi,act8945a";
-		reg = <0x5b>;
-
-		active-semi,vsel-high;
-
-		regulators {
-			vdd_1v35_reg: REG_DCDC1 {
-				regulator-name = "VDD_1V35";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-
-				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
-							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
-				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-min-microvolt=<1400000>;
-					regulator-suspend-max-microvolt=<1400000>;
-					regulator-changeable-in-suspend;
-					regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>;
-				};
-			};
-
-			vdd_1v2_reg: REG_DCDC2 {
-				regulator-name = "VDD_1V2";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-
-				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
-							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
-				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_3v3_reg: REG_DCDC3 {
-				regulator-name = "VDD_3V3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_fuse_reg: REG_LDO1 {
-				regulator-name = "VDD_FUSE";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-
-				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
-							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
-				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_3v3_lp_reg: REG_LDO2 {
-				regulator-name = "VDD_3V3_LP";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_led_reg: REG_LDO3 {
-				regulator-name = "VDD_LED";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_sdhc_1v8_reg: REG_LDO4 {
-				regulator-name = "VDD_SDHC_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml
new file mode 100644
index 0000000..b8ca967
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/active-semi,act8600.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8600 regulator
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    const: active-semi,act8600
+
+  reg:
+    maxItems: 1
+
+  system-power-controller:
+    description:
+      Indicates that the ACT8600 is responsible for powering OFF
+      the system.
+    type: boolean
+
+  active-semi,vsel-high:
+    description:
+      Indicates the VSEL pin is high. If this property is missing,
+      the VSEL pin is assumed to be low.
+    type: boolean
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    properties:
+      DCDC1:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp1-supply:
+            description: Handle to the VP1 input supply
+
+      DCDC2:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp2-supply:
+            description: Handle to the VP2 input supply
+
+      DCDC3:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp3-supply:
+            description: Handle to the VP3 input supply
+
+    patternProperties:
+      "^(SUDCDC_REG4|LDO_REG9|LDO_REG10)$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      "^LDO[5-8]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl-supply:
+            description: Handle to the INL input supply
+
+additionalProperties: false
+
+required:
+  - reg
+  - compatible
+  - regulators
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@5a {
+        compatible = "active-semi,act8600";
+        reg = <0x5a>;
+
+        regulators {
+          SUDCDC_REG4 {
+            regulator-min-microvolt = <5300000>;
+            regulator-max-microvolt = <5300000>;
+            inl-supply = <&vcc>;
+          };
+
+          LDO5 {
+            regulator-min-microvolt = <2500000>;
+            regulator-max-microvolt = <2500000>;
+            inl-supply = <&vcc>;
+          };
+
+          LDO6 {
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            inl-supply = <&vcc>;
+          };
+
+          LDO7 {
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            inl-supply = <&vcc>;
+          };
+
+          LDO8 {
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+            inl-supply = <&vcc>;
+          };
+
+          LDO_REG9 {
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+            inl-supply = <&vcc>;
+          };
+
+          LDO_REG10 {
+            inl-supply = <&vcc>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml
new file mode 100644
index 0000000..3725348
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml
@@ -0,0 +1,205 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/active-semi,act8846.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8846 regulator
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    const: active-semi,act8846
+
+  reg:
+    maxItems: 1
+
+  system-power-controller:
+    description:
+      Indicates that the ACT8846 is responsible for powering OFF
+      the system.
+    type: boolean
+
+  active-semi,vsel-high:
+    description:
+      Indicates the VSEL pin is high. If this property is missing,
+      the VSEL pin is assumed to be low.
+    type: boolean
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    properties:
+      REG1:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp1-supply:
+            description: Handle to the VP1 input supply
+
+      REG2:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp2-supply:
+            description: Handle to the VP2 input supply
+
+      REG3:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp3-supply:
+            description: Handle to the VP3 input supply
+
+      REG4:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp4-supply:
+            description: Handle to the VP4 input supply
+
+    patternProperties:
+      "^REG[5-7]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl1-supply:
+            description: Handle to the INL1 input supply
+
+      "^REG[8-9]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl2-supply:
+            description: Handle to the INL2 input supply
+
+      "^REG1[0-2]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl3-supply:
+            description: Handle to the INL3 input supply
+
+additionalProperties: false
+
+required:
+  - reg
+  - compatible
+  - regulators
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@5a {
+        compatible = "active-semi,act8846";
+        reg = <0x5a>;
+
+        system-power-controller;
+
+        regulators {
+          REG1 {
+            regulator-name = "VCC_DDR";
+            regulator-min-microvolt = <1200000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-always-on;
+          };
+
+          REG2 {
+            regulator-name = "VCC_IO";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          REG3 {
+            regulator-name = "VDD_LOG";
+            regulator-min-microvolt = <1000000>;
+            regulator-max-microvolt = <1000000>;
+            regulator-always-on;
+          };
+
+          REG4 {
+            regulator-name = "VCC_20";
+            regulator-min-microvolt = <2000000>;
+            regulator-max-microvolt = <2000000>;
+            regulator-always-on;
+          };
+
+          REG5 {
+            regulator-name = "VCCIO_SD";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          REG6 {
+            regulator-name = "VDD10_LCD";
+            regulator-min-microvolt = <1000000>;
+            regulator-max-microvolt = <1000000>;
+            regulator-always-on;
+          };
+
+          REG7 {
+            regulator-name = "VCC_WL";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          REG8 {
+            regulator-name = "VCCA_33";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          REG9 {
+            regulator-name = "VCC_LAN";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          REG10 {
+            regulator-name = "VDD_10";
+            regulator-min-microvolt = <1000000>;
+            regulator-max-microvolt = <1000000>;
+            regulator-always-on;
+          };
+
+          REG11 {
+            regulator-name = "VCC_18";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+
+          REG12 {
+            regulator-name = "VCC18_LCD";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml
new file mode 100644
index 0000000..e8bf09f
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/active-semi,act8865.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8865 regulator
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    const: active-semi,act8865
+
+  reg:
+    maxItems: 1
+
+  system-power-controller:
+    description:
+      Indicates that the ACT8865 is responsible for powering OFF
+      the system.
+    type: boolean
+
+  active-semi,vsel-high:
+    description:
+      Indicates the VSEL pin is high. If this property is missing,
+      the VSEL pin is assumed to be low.
+    type: boolean
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    properties:
+      DCDC_REG1:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp1-supply:
+            description: Handle to the VP1 input supply
+
+      DCDC_REG2:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp2-supply:
+            description: Handle to the VP2 input supply
+
+      DCDC_REG3:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp3-supply:
+            description: Handle to the VP3 input supply
+
+    patternProperties:
+      "^LDO_REG[1-2]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl45-supply:
+            description: Handle to the INL45 input supply
+
+      "^LDO_REG[3-4]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl67-supply:
+            description: Handle to the INL67 input supply
+
+additionalProperties: false
+
+required:
+  - reg
+  - compatible
+  - regulators
+
+examples:
+  - |
+    #include <dt-bindings/regulator/active-semi,8865-regulator.h>
+
+    i2c1 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@5b {
+        compatible = "active-semi,act8865";
+        reg = <0x5b>;
+        active-semi,vsel-high;
+
+        regulators {
+          DCDC_REG1 {
+            regulator-name = "VCC_1V8";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+
+          DCDC_REG2 {
+            regulator-name = "VCC_1V2";
+            regulator-min-microvolt = <1100000>;
+            regulator-max-microvolt = <1300000>;
+            regulator-always-on;
+
+            regulator-allowed-modes = <ACT8865_REGULATOR_MODE_FIXED>,
+                                      <ACT8865_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8865_REGULATOR_MODE_FIXED>;
+
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-suspend-min-microvolt = <1150000>;
+              regulator-suspend-max-microvolt = <1150000>;
+              regulator-changeable-in-suspend;
+              regulator-mode = <ACT8865_REGULATOR_MODE_LOWPOWER>;
+            };
+          };
+
+          DCDC_REG3 {
+            regulator-name = "VCC_3V3";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          LDO_REG1 {
+            regulator-name = "VDDANA";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+
+            regulator-allowed-modes = <ACT8865_REGULATOR_MODE_NORMAL>,
+                                      <ACT8865_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8865_REGULATOR_MODE_NORMAL>;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          LDO_REG2 {
+            regulator-name = "FUSE_2V5";
+            regulator-min-microvolt = <2500000>;
+            regulator-max-microvolt = <2500000>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml
new file mode 100644
index 0000000..bdf3f7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml
@@ -0,0 +1,258 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/active-semi,act8945a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8945a regulator
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    const: active-semi,act8945a
+
+  reg:
+    maxItems: 1
+
+  system-power-controller:
+    description:
+      Indicates that the ACT8945a is responsible for powering OFF
+      the system.
+    type: boolean
+
+  active-semi,vsel-high:
+    description:
+      Indicates the VSEL pin is high. If this property is missing,
+      the VSEL pin is assumed to be low.
+    type: boolean
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    properties:
+      REG_DCDC1:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp1-supply:
+            description: Handle to the VP1 input supply
+
+      REG_DCDC2:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp2-supply:
+            description: Handle to the VP2 input supply
+
+      REG_DCDC3:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp3-supply:
+            description: Handle to the VP3 input supply
+
+    patternProperties:
+      "^REG_LDO[1-2]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl45-supply:
+            description: Handle to the INL45 input supply
+
+      "^REG_LDO[3-4]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl67-supply:
+            description: Handle to the INL67 input supply
+
+  charger:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: active-semi,act8945a-charger
+
+      interrupts:
+        maxItems: 1
+
+      active-semi,chglev-gpios:
+        description: CGHLEV GPIO
+        maxItems: 1
+
+      active-semi,lbo-gpios:
+        description: LBO GPIO
+        maxItems: 1
+
+      active-semi,input-voltage-threshold-microvolt:
+        description: Input voltage threshold
+        maxItems: 1
+
+      active-semi,precondition-timeout:
+        description: Precondition timeout
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      active-semi,total-timeout:
+        description: Total timeout
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    required:
+      - compatible
+      - interrupts
+
+additionalProperties: false
+
+required:
+  - reg
+  - compatible
+  - regulators
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mfd/atmel-flexcom.h>
+    #include <dt-bindings/regulator/active-semi,8945a-regulator.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@5b {
+        compatible = "active-semi,act8945a";
+        reg = <0x5b>;
+        active-semi,vsel-high;
+
+        regulators {
+          REG_DCDC1 {
+            regulator-name = "VDD_1V35";
+            regulator-min-microvolt = <1350000>;
+            regulator-max-microvolt = <1350000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-suspend-min-microvolt = <1400000>;
+              regulator-suspend-max-microvolt = <1400000>;
+              regulator-changeable-in-suspend;
+              regulator-mode = <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            };
+          };
+
+          REG_DCDC2 {
+            regulator-name = "VDD_1V2";
+            regulator-min-microvolt = <1100000>;
+            regulator-max-microvolt = <1300000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          REG_DCDC3 {
+            regulator-name = "VDD_3V3";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          REG_LDO1 {
+            regulator-name = "VDD_FUSE";
+            regulator-min-microvolt = <2500000>;
+            regulator-max-microvolt = <2500000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          REG_LDO2 {
+            regulator-name = "VDD_3V3_LP";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          REG_LDO3 {
+            regulator-name = "VDD_LED";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          REG_LDO4 {
+            regulator-name = "VDD_SDHC_1V8";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+        };
+
+        charger {
+          compatible = "active-semi,act8945a-charger";
+          pinctrl-names = "default";
+          pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+          interrupt-parent = <&pioA>;
+          interrupts = <45 IRQ_TYPE_EDGE_RISING>;
+
+          active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+          active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
+          active-semi,input-voltage-threshold-microvolt = <6600>;
+          active-semi,precondition-timeout = <40>;
+          active-semi,total-timeout = <3>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/fan53555.txt b/Documentation/devicetree/bindings/regulator/fan53555.txt
deleted file mode 100644
index 013f096..0000000
--- a/Documentation/devicetree/bindings/regulator/fan53555.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Binding for Fairchild FAN53555 regulators
-
-Required properties:
-  - compatible: one of "fcs,fan53555", "fcs,fan53526", "silergy,syr827",
-		"silergy,syr828" or "tcs,tcs4525".
-  - reg: I2C address
-
-Optional properties:
-  - fcs,suspend-voltage-selector: declare which of the two available
-		voltage selector registers should be used for the suspend
-		voltage. The other one is used for the runtime voltage setting
-		Possible values are either <0> or <1>
-  - vin-supply: regulator supplying the vin pin
-
-Example:
-
-	regulator@40 {
-		compatible = "fcs,fan53555";
-		regulator-name = "fan53555";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&parent_reg>;
-		fcs,suspend-voltage-selector = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/regulator/fcs,fan53555.yaml b/Documentation/devicetree/bindings/regulator/fcs,fan53555.yaml
new file mode 100644
index 0000000..c0dbba8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/fcs,fan53555.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/fcs,fan53555.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fairchild FAN53555 regulators
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fcs,fan53555
+      - fcs,fan53526
+      - silergy,syr827
+      - silergy,syr828
+      - tcs,tcs4525
+
+  reg:
+    maxItems: 1
+
+  fcs,suspend-voltage-selector:
+    description: Declares which of the two available voltage selector
+      registers should be used for the suspend voltage. The other one is used
+      for the runtime voltage setting.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+
+  vin-supply:
+    description: Supply for the vin pin
+
+  vsel-gpios:
+    description: Voltage Select. When this pin is LOW, VOUT is set by the
+      VSEL0 register. When this pin is HIGH, VOUT is set by the VSEL1 register.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@40 {
+            compatible = "fcs,fan53555";
+            reg = <0x40>;
+            regulator-name = "fan53555";
+            regulator-min-microvolt = <1000000>;
+            regulator-max-microvolt = <1800000>;
+            vin-supply = <&parent_reg>;
+            fcs,suspend-voltage-selector = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
index 84eeaef..48af7cb 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@@ -35,6 +35,10 @@ allOf:
       required:
         - power-domains
         - required-opps
+  - not:
+      required:
+        - gpio
+        - gpios
 
 properties:
   compatible:
@@ -49,6 +53,9 @@ properties:
     description: gpio to use for enable control
     maxItems: 1
 
+  gpios:
+    maxItems: 1
+
   clocks:
     description:
       clock to use for enable control. This binding is only available if
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max20411.yaml b/Documentation/devicetree/bindings/regulator/maxim,max20411.yaml
new file mode 100644
index 0000000..5b3a42d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max20411.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max20411.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX20411 Step-Down DC-DC Converter
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  The MAX20411 is a high-efficiency, DC-DC step-down converter. It provides
+  configurable output voltage in the range of 0.5V to 1.275V, configurable over
+  I2C.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    const: maxim,max20411
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO connected to the EN pin, active high
+
+  vdd-supply:
+    description: Input supply for the device (VDD pin, 3.0V to 5.5V)
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@39 {
+            compatible = "maxim,max20411";
+            reg = <0x39>;
+
+            enable-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+
+            regulator-min-microvolt = <800000>;
+            regulator-max-microvolt = <1000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml
new file mode 100644
index 0000000..8a08698
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,rpm-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPM regulator
+
+description:
+  The Qualcomm RPM regulator is modelled as a subdevice of the RPM.
+
+  Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml
+  for information regarding the RPM node.
+
+  The regulator node houses sub-nodes for each regulator within the device.
+  Each sub-node is identified using the node's name, with valid values listed
+  for each of the pmics below.
+
+  For pm8058 l0, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15,
+  l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, s0, s1, s2, s3, s4,
+  lvs0, lvs1, ncp
+
+  For pm8901 l0, l1, l2, l3, l4, l5, l6, s0, s1, s2, s3, s4, lvs0, lvs1, lvs2, lvs3,
+  mvs
+
+  For pm8921 s1, s2, s3, s4, s7, s8, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l14, l15, l16, l17, l18, l21, l22, l23, l24, l25, l26, l27, l28,
+  l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch,
+  ncp
+
+  For pm8018 s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l14, lvs1
+
+  For smb208 s1a, s1b, s2a, s2b
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,rpm-pm8058-regulators
+      - qcom,rpm-pm8901-regulators
+      - qcom,rpm-pm8921-regulators
+      - qcom,rpm-pm8018-regulators
+      - qcom,rpm-smb208-regulators
+
+patternProperties:
+  ".*-supply$":
+    description: Input supply phandle(s) for this node
+
+  "^((s|l|lvs)[0-9]*)|(s[1-2][a-b])|(ncp)|(mvs)|(usb-switch)|(hdmi-switch)$":
+    description: List of regulators and its properties
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    properties:
+      bias-pull-down:
+        description: enable pull down of the regulator when inactive
+        type: boolean
+
+      qcom,switch-mode-frequency:
+        description: Frequency (Hz) of the switch-mode power supply
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum:
+          - 19200000
+          - 9600000
+          - 6400000
+          - 4800000
+          - 3840000
+          - 3200000
+          - 2740000
+          - 2400000
+          - 2130000
+          - 1920000
+          - 1750000
+          - 1600000
+          - 1480000
+          - 1370000
+          - 1280000
+          - 1200000
+
+      qcom,force-mode:
+        description: Indicates that the regulator should be forced to a particular mode
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum:
+          - 0 # QCOM_RPM_FORCE_MODE_NONE do not force any mode
+          - 1 # QCOM_RPM_FORCE_MODE_LPM force into low power mode
+          - 2 # QCOM_RPM_FORCE_MODE_HPM force into high power mode
+          - 3 # QCOM_RPM_FORCE_MODE_AUTO allow regulator to automatically select its own mode
+              # based on realtime current draw, only for pm8921 smps and ftsmps
+
+      qcom,power-mode-hysteretic:
+        description: select that the power supply should operate in hysteretic mode,
+          instead of the default pwm mode
+        type: boolean
+
+additionalProperties: false
+
+required:
+  - compatible
+
+examples:
+  - |
+    #include <dt-bindings/mfd/qcom-rpm.h>
+    regulators {
+      compatible = "qcom,rpm-pm8921-regulators";
+      vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+
+      s1 {
+        regulator-min-microvolt = <1225000>;
+        regulator-max-microvolt = <1225000>;
+
+        bias-pull-down;
+
+        qcom,switch-mode-frequency = <3200000>;
+      };
+
+      pm8921_s4: s4 {
+        regulator-min-microvolt = <1800000>;
+        regulator-max-microvolt = <1800000>;
+
+        qcom,switch-mode-frequency = <1600000>;
+        bias-pull-down;
+
+        qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
index dbe78cd..b1cff3a 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
@@ -33,7 +33,7 @@ examples:
      pm8150b {
         #address-cells = <1>;
         #size-cells = <0>;
-        pm8150b_vbus: dcdc@1100 {
+        pm8150b_vbus: usb-vbus-regulator@1100 {
             compatible = "qcom,pm8150b-vbus-reg";
             reg = <0x1100>;
         };
diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
index f97b808..e987c39 100644
--- a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
@@ -20,7 +20,8 @@ properties:
 
   lab:
     type: object
-    additionalProperties: false
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
 
     properties:
       qcom,soft-start-us:
@@ -46,7 +47,8 @@ properties:
 
   ibb:
     type: object
-    additionalProperties: false
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
 
     properties:
       qcom,discharge-resistor-kohms:
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 820c9a0..aae28d0 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -655,6 +655,14 @@ config REGULATOR_MAX20086
 	  protectorvia I2C bus. The regulator has 2 or 4 outputs depending on
 	  the device model. This driver is only capable to turn on/off them.
 
+config REGULATOR_MAX20411
+	tristate "Maxim MAX20411 High-Efficiency Single Step-Down Converter"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver controls the Maxim MAX20411 family of high-efficiency,
+	  syncrhonous step-down converters.
+
 config REGULATOR_MAX77686
 	tristate "Maxim 77686 regulator"
 	depends on MFD_MAX77686 || COMPILE_TEST
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index b9f5eb3..ee383d8 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -80,6 +80,7 @@ obj-$(CONFIG_REGULATOR_MAX8973) += max8973-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8997) += max8997-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
 obj-$(CONFIG_REGULATOR_MAX20086) += max20086-regulator.o
+obj-$(CONFIG_REGULATOR_MAX20411) += max20411-regulator.o
 obj-$(CONFIG_REGULATOR_MAX77686) += max77686-regulator.o
 obj-$(CONFIG_REGULATOR_MAX77693) += max77693-regulator.o
 obj-$(CONFIG_REGULATOR_MAX77802) += max77802-regulator.o
diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c
index 6a62f94..1db1c64 100644
--- a/drivers/regulator/act8945a-regulator.c
+++ b/drivers/regulator/act8945a-regulator.c
@@ -15,7 +15,7 @@
 #include <linux/regulator/machine.h>
 #include <dt-bindings/regulator/active-semi,8945a-regulator.h>
 
-/**
+/*
  * ACT8945A Global Register Map.
  */
 #define ACT8945A_SYS_MODE	0x00
@@ -46,13 +46,13 @@
 #define ACT8945A_LDO4_CTRL	0x65
 #define ACT8945A_LDO4_SUS	0x66
 
-/**
+/*
  * Field Definitions.
  */
 #define ACT8945A_ENA		0x80	/* ON - [7] */
 #define ACT8945A_VSEL_MASK	0x3F	/* VSET - [5:0] */
 
-/**
+/*
  * ACT8945A Voltage Number
  */
 #define ACT8945A_VOLTAGE_NUM	64
diff --git a/drivers/regulator/fixed-helper.c b/drivers/regulator/fixed-helper.c
index 2c6098e..0eb2442 100644
--- a/drivers/regulator/fixed-helper.c
+++ b/drivers/regulator/fixed-helper.c
@@ -20,7 +20,7 @@ static void regulator_fixed_release(struct device *dev)
 }
 
 /**
- * regulator_register_fixed_name - register a no-op fixed regulator
+ * regulator_register_always_on - register an always-on regulator with a fixed name
  * @id: platform device id
  * @name: name to be used for the regulator
  * @supplies: consumers for this regulator
diff --git a/drivers/regulator/max20411-regulator.c b/drivers/regulator/max20411-regulator.c
new file mode 100644
index 0000000..83dacb4
--- /dev/null
+++ b/drivers/regulator/max20411-regulator.c
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Ltd.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+#define MAX20411_UV_STEP		6250
+#define MAX20411_BASE_UV		243750
+#define MAX20411_MIN_SEL		41 /* 0.5V */
+#define MAX20411_MAX_SEL		165 /* 1.275V */
+#define MAX20411_VID_OFFSET		0x7
+#define MAX20411_VID_MASK		0xff
+#define MAX20411_SLEW_OFFSET		0x6
+#define MAX20411_SLEW_DVS_MASK		0xc
+#define MAX20411_SLEW_SR_MASK		0x3
+
+struct max20411 {
+	struct device *dev;
+	struct device_node *of_node;
+	struct regulator_desc desc;
+	struct regulator_dev *rdev;
+	struct regmap *regmap;
+};
+
+static const unsigned int max20411_slew_rates[] = { 13100, 6600, 3300, 1600 };
+
+static int max20411_enable_time(struct regulator_dev *rdev)
+{
+	int voltage, rate, ret;
+	unsigned int val;
+
+	/* get voltage */
+	ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
+	if (ret)
+		return ret;
+
+	val &= rdev->desc->vsel_mask;
+	voltage = regulator_list_voltage_linear(rdev, val);
+
+	/* get rate */
+	ret = regmap_read(rdev->regmap, MAX20411_SLEW_OFFSET, &val);
+	if (ret)
+		return ret;
+
+	val = FIELD_GET(MAX20411_SLEW_SR_MASK, val);
+	rate = max20411_slew_rates[val];
+
+	return DIV_ROUND_UP(voltage, rate);
+}
+
+static const struct regmap_config max20411_regmap_config = {
+	.reg_bits		= 8,
+	.val_bits		= 8,
+	.max_register		= 0xe,
+};
+
+static const struct regulator_ops max20411_ops = {
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.enable_time		= max20411_enable_time,
+};
+
+static const struct regulator_desc max20411_desc = {
+	.ops = &max20411_ops,
+	.owner = THIS_MODULE,
+	.type = REGULATOR_VOLTAGE,
+	.supply_name = "vin",
+	.name = "max20411",
+
+	/*
+	 * voltage = 0.24375V + selector * 6.25mV
+	 * with valid selector between 41 to 165 (0.5V to 1.275V)
+	 */
+	.min_uV = MAX20411_BASE_UV,
+	.uV_step = MAX20411_UV_STEP,
+	.linear_min_sel = MAX20411_MIN_SEL,
+	.n_voltages = MAX20411_MAX_SEL + 1,
+
+	.vsel_reg = MAX20411_VID_OFFSET,
+	.vsel_mask = MAX20411_VID_MASK,
+
+	.ramp_reg = MAX20411_SLEW_OFFSET,
+	.ramp_mask = MAX20411_SLEW_DVS_MASK,
+	.ramp_delay_table = max20411_slew_rates,
+	.n_ramp_values = ARRAY_SIZE(max20411_slew_rates),
+};
+
+static int max20411_probe(struct i2c_client *client)
+{
+	struct regulator_init_data *init_data;
+	struct device *dev = &client->dev;
+	struct regulator_config cfg = {};
+	struct max20411 *max20411;
+
+	max20411 = devm_kzalloc(dev, sizeof(*max20411), GFP_KERNEL);
+	if (!max20411)
+		return -ENOMEM;
+
+	max20411->regmap = devm_regmap_init_i2c(client, &max20411_regmap_config);
+	if (IS_ERR(max20411->regmap)) {
+		dev_err(dev, "Failed to allocate regmap!\n");
+		return PTR_ERR(max20411->regmap);
+	}
+
+	max20411->dev = dev;
+	max20411->of_node = dev->of_node;
+
+	max20411->desc = max20411_desc;
+	init_data = of_get_regulator_init_data(max20411->dev, max20411->of_node, &max20411->desc);
+	if (!init_data)
+		return -ENODATA;
+
+	cfg.dev = max20411->dev;
+	cfg.init_data = init_data;
+	cfg.of_node = max20411->of_node;
+	cfg.driver_data = max20411;
+
+	cfg.ena_gpiod = gpiod_get(max20411->dev, "enable", GPIOD_ASIS);
+	if (IS_ERR(cfg.ena_gpiod))
+		return dev_err_probe(dev, PTR_ERR(cfg.ena_gpiod),
+				     "unable to acquire enable gpio\n");
+
+	max20411->rdev = devm_regulator_register(max20411->dev, &max20411->desc, &cfg);
+	if (IS_ERR(max20411->rdev))
+		dev_err(max20411->dev, "Failed to register regulator\n");
+
+	return PTR_ERR_OR_ZERO(max20411->rdev);
+}
+
+static const struct of_device_id of_max20411_match_tbl[] = {
+	{ .compatible = "maxim,max20411", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_max20411_match_tbl);
+
+static const struct i2c_device_id max20411_id[] = {
+	{ "max20411", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, max20411_id);
+
+static struct i2c_driver max20411_i2c_driver = {
+	.driver	= {
+		.name = "max20411",
+		.of_match_table	= of_max20411_match_tbl,
+	},
+	.probe_new = max20411_probe,
+	.id_table = max20411_id,
+};
+module_i2c_driver(max20411_i2c_driver);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/max597x-regulator.c b/drivers/regulator/max597x-regulator.c
index 39f803f..f0fb0f5 100644
--- a/drivers/regulator/max597x-regulator.c
+++ b/drivers/regulator/max597x-regulator.c
@@ -357,12 +357,6 @@ static int max597x_irq_handler(int irq, struct regulator_irq_data *rid,
 	return 0;
 }
 
-static const struct regmap_config max597x_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-	.max_register = MAX_REGISTERS,
-};
-
 static int max597x_adc_range(struct regmap *regmap, const int ch,
 			     u32 *irng, u32 *mon_rng)
 {
@@ -431,41 +425,59 @@ static int max597x_setup_irq(struct device *dev,
 
 static int max597x_regulator_probe(struct platform_device *pdev)
 {
-
-
-	struct max597x_data *max597x = dev_get_drvdata(pdev->dev.parent);
+	struct max597x_data *max597x;
+	struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL);
 	struct max597x_regulator *data;
-
+	struct i2c_client *i2c = to_i2c_client(pdev->dev.parent);
 	struct regulator_config config = { };
 	struct regulator_dev *rdev;
 	struct regulator_dev *rdevs[MAX5970_NUM_SWITCHES];
-	int num_switches = max597x->num_switches;
+	int num_switches;
 	int ret, i;
 
+	if (!regmap)
+		return -EPROBE_DEFER;
+
+	max597x = devm_kzalloc(&i2c->dev, sizeof(struct max597x_data), GFP_KERNEL);
+	if (!max597x)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, max597x);
+
+	if (of_device_is_compatible(i2c->dev.of_node, "maxim,max5978"))
+		max597x->num_switches = MAX597x_TYPE_MAX5978;
+	else if (of_device_is_compatible(i2c->dev.of_node, "maxim,max5970"))
+		max597x->num_switches = MAX597x_TYPE_MAX5970;
+	else
+		return -ENODEV;
+
+	i2c_set_clientdata(i2c, max597x);
+	num_switches = max597x->num_switches;
+
 	for (i = 0; i < num_switches; i++) {
 		data =
-		    devm_kzalloc(max597x->dev, sizeof(struct max597x_regulator),
+		    devm_kzalloc(&i2c->dev, sizeof(struct max597x_regulator),
 				 GFP_KERNEL);
 		if (!data)
 			return -ENOMEM;
 
 		data->num_switches = num_switches;
-		data->regmap = max597x->regmap;
+		data->regmap = regmap;
 
-		ret = max597x_adc_range(data->regmap, i, &max597x->irng[i], &max597x->mon_rng[i]);
+		ret = max597x_adc_range(regmap, i, &max597x->irng[i], &max597x->mon_rng[i]);
 		if (ret < 0)
 			return ret;
 
 		data->irng = max597x->irng[i];
 		data->mon_rng = max597x->mon_rng[i];
 
-		config.dev = max597x->dev;
+		config.dev = &i2c->dev;
 		config.driver_data = (void *)data;
 		config.regmap = data->regmap;
-		rdev = devm_regulator_register(max597x->dev,
+		rdev = devm_regulator_register(&i2c->dev,
 					       &regulators[i], &config);
 		if (IS_ERR(rdev)) {
-			dev_err(max597x->dev, "failed to register regulator %s\n",
+			dev_err(&i2c->dev, "failed to register regulator %s\n",
 				regulators[i].name);
 			return PTR_ERR(rdev);
 		}
@@ -473,12 +485,12 @@ static int max597x_regulator_probe(struct platform_device *pdev)
 		max597x->shunt_micro_ohms[i] = data->shunt_micro_ohms;
 	}
 
-	if (max597x->irq) {
+	if (i2c->irq) {
 		ret =
-		    max597x_setup_irq(max597x->dev, max597x->irq, rdevs, num_switches,
+		    max597x_setup_irq(&i2c->dev, i2c->irq, rdevs, num_switches,
 				      data);
 		if (ret) {
-			dev_err(max597x->dev, "IRQ setup failed");
+			dev_err(&i2c->dev, "IRQ setup failed");
 			return ret;
 		}
 	}
diff --git a/drivers/regulator/max77802-regulator.c b/drivers/regulator/max77802-regulator.c
index 21e0eb0..befe5f3 100644
--- a/drivers/regulator/max77802-regulator.c
+++ b/drivers/regulator/max77802-regulator.c
@@ -94,9 +94,11 @@ static int max77802_set_suspend_disable(struct regulator_dev *rdev)
 {
 	unsigned int val = MAX77802_OFF_PWRREQ;
 	struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
-	int id = rdev_get_id(rdev);
+	unsigned int id = rdev_get_id(rdev);
 	int shift = max77802_get_opmode_shift(id);
 
+	if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+		return -EINVAL;
 	max77802->opmode[id] = val;
 	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 				  rdev->desc->enable_mask, val << shift);
@@ -110,7 +112,7 @@ static int max77802_set_suspend_disable(struct regulator_dev *rdev)
 static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode)
 {
 	struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
-	int id = rdev_get_id(rdev);
+	unsigned int id = rdev_get_id(rdev);
 	unsigned int val;
 	int shift = max77802_get_opmode_shift(id);
 
@@ -127,6 +129,9 @@ static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode)
 		return -EINVAL;
 	}
 
+	if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+		return -EINVAL;
+
 	max77802->opmode[id] = val;
 	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 				  rdev->desc->enable_mask, val << shift);
@@ -135,8 +140,10 @@ static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode)
 static unsigned max77802_get_mode(struct regulator_dev *rdev)
 {
 	struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
-	int id = rdev_get_id(rdev);
+	unsigned int id = rdev_get_id(rdev);
 
+	if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+		return -EINVAL;
 	return max77802_map_mode(max77802->opmode[id]);
 }
 
@@ -160,10 +167,13 @@ static int max77802_set_suspend_mode(struct regulator_dev *rdev,
 				     unsigned int mode)
 {
 	struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
-	int id = rdev_get_id(rdev);
+	unsigned int id = rdev_get_id(rdev);
 	unsigned int val;
 	int shift = max77802_get_opmode_shift(id);
 
+	if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+		return -EINVAL;
+
 	/*
 	 * If the regulator has been disabled for suspend
 	 * then is invalid to try setting a suspend mode.
@@ -209,9 +219,11 @@ static int max77802_set_suspend_mode(struct regulator_dev *rdev,
 static int max77802_enable(struct regulator_dev *rdev)
 {
 	struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
-	int id = rdev_get_id(rdev);
+	unsigned int id = rdev_get_id(rdev);
 	int shift = max77802_get_opmode_shift(id);
 
+	if (WARN_ON_ONCE(id >= ARRAY_SIZE(max77802->opmode)))
+		return -EINVAL;
 	if (max77802->opmode[id] == MAX77802_OFF_PWRREQ)
 		max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
 
@@ -495,7 +507,7 @@ static int max77802_pmic_probe(struct platform_device *pdev)
 
 	for (i = 0; i < MAX77802_REG_MAX; i++) {
 		struct regulator_dev *rdev;
-		int id = regulators[i].id;
+		unsigned int id = regulators[i].id;
 		int shift = max77802_get_opmode_shift(id);
 		int ret;
 
@@ -513,10 +525,12 @@ static int max77802_pmic_probe(struct platform_device *pdev)
 		 * the hardware reports OFF as the regulator operating mode.
 		 * Default to operating mode NORMAL in that case.
 		 */
-		if (val == MAX77802_STATUS_OFF)
-			max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
-		else
-			max77802->opmode[id] = val;
+		if (id < ARRAY_SIZE(max77802->opmode)) {
+			if (val == MAX77802_STATUS_OFF)
+				max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
+			else
+				max77802->opmode[id] = val;
+		}
 
 		rdev = devm_regulator_register(&pdev->dev,
 					       &regulators[i], &config);
diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c
index 0426683..abee1b0 100644
--- a/drivers/regulator/mcp16502.c
+++ b/drivers/regulator/mcp16502.c
@@ -77,6 +77,7 @@
  * @MCP16502_REG_A: active state register
  * @MCP16502_REG_LPM: low power mode state register
  * @MCP16502_REG_HIB: hibernate state register
+ * @MCP16502_REG_HPM: high-performance mode register
  * @MCP16502_REG_SEQ: startup sequence register
  * @MCP16502_REG_CFG: configuration register
  */
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 35269f9..754c6fc 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -923,10 +923,14 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
 
 	for (i = 0; i < pdata->num_regulators; i++) {
 		const struct sec_voltage_desc *desc;
-		int id = pdata->regulators[i].id;
+		unsigned int id = pdata->regulators[i].id;
 		int enable_reg, enable_val;
 		struct regulator_dev *rdev;
 
+		BUILD_BUG_ON(ARRAY_SIZE(regulators) != ARRAY_SIZE(reg_voltage_map));
+		if (WARN_ON_ONCE(id >= ARRAY_SIZE(regulators)))
+			continue;
+
 		desc = reg_voltage_map[id];
 		if (desc) {
 			regulators[id].n_voltages =
diff --git a/drivers/regulator/scmi-regulator.c b/drivers/regulator/scmi-regulator.c
index b9918f4..29ab217 100644
--- a/drivers/regulator/scmi-regulator.c
+++ b/drivers/regulator/scmi-regulator.c
@@ -311,16 +311,12 @@ static int scmi_regulator_probe(struct scmi_device *sdev)
 		return PTR_ERR(voltage_ops);
 
 	num_doms = voltage_ops->num_domains_get(ph);
-	if (num_doms <= 0) {
-		if (!num_doms) {
-			dev_err(&sdev->dev,
-				"number of voltage domains invalid\n");
-			num_doms = -EINVAL;
-		} else {
-			dev_err(&sdev->dev,
-				"failed to get voltage domains - err:%d\n",
-				num_doms);
-		}
+	if (!num_doms)
+		return 0;
+
+	if (num_doms < 0) {
+		dev_err(&sdev->dev, "failed to get voltage domains - err:%d\n",
+			num_doms);
 
 		return num_doms;
 	}
diff --git a/drivers/regulator/tps65219-regulator.c b/drivers/regulator/tps65219-regulator.c
index c484c94..4b5acaa 100644
--- a/drivers/regulator/tps65219-regulator.c
+++ b/drivers/regulator/tps65219-regulator.c
@@ -173,24 +173,6 @@ static unsigned int tps65219_get_mode(struct regulator_dev *dev)
 		return REGULATOR_MODE_NORMAL;
 }
 
-/*
- * generic regulator_set_bypass_regmap does not fully match requirements
- * TPS65219 Requires explicitly that regulator is disabled before switch
- */
-static int tps65219_set_bypass(struct regulator_dev *dev, bool enable)
-{
-	struct tps65219 *tps = rdev_get_drvdata(dev);
-	unsigned int rid = rdev_get_id(dev);
-
-	if (dev->desc->ops->is_enabled(dev)) {
-		dev_err(tps->dev,
-			"%s LDO%d enabled, must be shut down to set bypass ",
-			__func__, rid);
-		return -EBUSY;
-	}
-	return regulator_set_bypass_regmap(dev, enable);
-}
-
 /* Operations permitted on BUCK1/2/3 */
 static const struct regulator_ops tps65219_bucks_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -217,7 +199,7 @@ static const struct regulator_ops tps65219_ldos_1_2_ops = {
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.list_voltage		= regulator_list_voltage_linear_range,
 	.map_voltage		= regulator_map_voltage_linear_range,
-	.set_bypass		= tps65219_set_bypass,
+	.set_bypass		= regulator_set_bypass_regmap,
 	.get_bypass		= regulator_get_bypass_regmap,
 };
 
@@ -342,7 +324,7 @@ static int tps65219_regulator_probe(struct platform_device *pdev)
 					       &config);
 		if (IS_ERR(rdev)) {
 			dev_err(tps->dev, "failed to register %s regulator\n",
-				pdev->name);
+				regulators[i].name);
 			return PTR_ERR(rdev);
 		}
 		rdevtbl[i] = rdev;
@@ -367,7 +349,7 @@ static int tps65219_regulator_probe(struct platform_device *pdev)
 		irq_data[i].type = irq_type;
 
 		tps65219_get_rdev_by_name(irq_type->regulator_name, rdevtbl, rdev);
-		if (rdev < 0) {
+		if (IS_ERR(rdev)) {
 			dev_err(tps->dev, "Failed to get rdev for %s\n",
 				irq_type->regulator_name);
 			return -EINVAL;
