diff --git a/MAINTAINERS b/MAINTAINERS
index 3d2d5fb..f794002 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9696,8 +9696,9 @@ F:	include/uapi/linux/i2c-*.h
 F:	include/uapi/linux/i2c.h
 
 I2C SUBSYSTEM HOST DRIVERS
+M:	Andi Shyti <andi.shyti@kernel.org>
 L:	linux-i2c@vger.kernel.org
-S:	Odd Fixes
+S:	Maintained
 W:	https://i2c.wiki.kernel.org/
 Q:	https://patchwork.ozlabs.org/project/linux-i2c/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
@@ -18047,6 +18048,14 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/usb/renesas,rzn1-usbf.yaml
 F:	drivers/usb/gadget/udc/renesas_usbf.c
 
+RENESAS RZ/V2M I2C DRIVER
+M:	Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+L:	linux-i2c@vger.kernel.org
+L:	linux-renesas-soc@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
+F:	drivers/i2c/busses/i2c-rzv2m.c
+
 RENESAS USB PHY DRIVER
 M:	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
 L:	linux-renesas-soc@vger.kernel.org
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index c5d87aa..bf23bfb 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -40,6 +40,7 @@
 #define DW_IC_CON_BUS_CLEAR_CTRL		BIT(11)
 
 #define DW_IC_DATA_CMD_DAT			GENMASK(7, 0)
+#define DW_IC_DATA_CMD_FIRST_DATA_BYTE		BIT(11)
 
 /*
  * Registers offset
diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
index cec2505..2e079cf 100644
--- a/drivers/i2c/busses/i2c-designware-slave.c
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -176,6 +176,10 @@ static irqreturn_t i2c_dw_isr_slave(int this_irq, void *dev_id)
 
 		do {
 			regmap_read(dev->map, DW_IC_DATA_CMD, &tmp);
+			if (tmp & DW_IC_DATA_CMD_FIRST_DATA_BYTE)
+				i2c_slave_event(dev->slave,
+						I2C_SLAVE_WRITE_REQUESTED,
+						&val);
 			val = tmp;
 			i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_RECEIVED,
 					&val);
diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c
index 8e98794..39c479f 100644
--- a/drivers/i2c/busses/i2c-img-scb.c
+++ b/drivers/i2c/busses/i2c-img-scb.c
@@ -257,7 +257,7 @@
 #define IMG_I2C_TIMEOUT			(msecs_to_jiffies(1000))
 
 /*
- * Worst incs are 1 (innacurate) and 16*256 (irregular).
+ * Worst incs are 1 (inaccurate) and 16*256 (irregular).
  * So a sensible inc is the logarithmic mean: 64 (2^6), which is
  * in the middle of the valid range (0-127).
  */
diff --git a/drivers/i2c/busses/i2c-mchp-pci1xxxx.c b/drivers/i2c/busses/i2c-mchp-pci1xxxx.c
index b21ffd6..5ef136c 100644
--- a/drivers/i2c/busses/i2c-mchp-pci1xxxx.c
+++ b/drivers/i2c/busses/i2c-mchp-pci1xxxx.c
@@ -1118,8 +1118,10 @@ static int pci1xxxx_i2c_resume(struct device *dev)
 static DEFINE_SIMPLE_DEV_PM_OPS(pci1xxxx_i2c_pm_ops, pci1xxxx_i2c_suspend,
 			 pci1xxxx_i2c_resume);
 
-static void pci1xxxx_i2c_shutdown(struct pci1xxxx_i2c *i2c)
+static void pci1xxxx_i2c_shutdown(void *data)
 {
+	struct pci1xxxx_i2c *i2c = data;
+
 	pci1xxxx_i2c_config_padctrl(i2c, false);
 	pci1xxxx_i2c_configure_core_reg(i2c, false);
 }
@@ -1156,7 +1158,7 @@ static int pci1xxxx_i2c_probe_pci(struct pci_dev *pdev,
 	init_completion(&i2c->i2c_xfer_done);
 	pci1xxxx_i2c_init(i2c);
 
-	ret = devm_add_action(dev, (void (*)(void *))pci1xxxx_i2c_shutdown, i2c);
+	ret = devm_add_action(dev, pci1xxxx_i2c_shutdown, i2c);
 	if (ret)
 		return ret;
 
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 047dfef..878c076 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -520,6 +520,17 @@ mv64xxx_i2c_intr(int irq, void *dev_id)
 
 	while (readl(drv_data->reg_base + drv_data->reg_offsets.control) &
 						MV64XXX_I2C_REG_CONTROL_IFLG) {
+		/*
+		 * It seems that sometime the controller updates the status
+		 * register only after it asserts IFLG in control register.
+		 * This may result in weird bugs when in atomic mode. A delay
+		 * of 100 ns before reading the status register solves this
+		 * issue. This bug does not seem to appear when using
+		 * interrupts.
+		 */
+		if (drv_data->atomic)
+			ndelay(100);
+
 		status = readl(drv_data->reg_base + drv_data->reg_offsets.status);
 		mv64xxx_i2c_fsm(drv_data, status);
 		mv64xxx_i2c_do_action(drv_data);
diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c
index 4fe15cd..ffc54fb 100644
--- a/drivers/i2c/busses/i2c-sprd.c
+++ b/drivers/i2c/busses/i2c-sprd.c
@@ -576,12 +576,14 @@ static int sprd_i2c_remove(struct platform_device *pdev)
 	struct sprd_i2c *i2c_dev = platform_get_drvdata(pdev);
 	int ret;
 
-	ret = pm_runtime_resume_and_get(i2c_dev->dev);
+	ret = pm_runtime_get_sync(i2c_dev->dev);
 	if (ret < 0)
-		return ret;
+		dev_err(&pdev->dev, "Failed to resume device (%pe)\n", ERR_PTR(ret));
 
 	i2c_del_adapter(&i2c_dev->adap);
-	clk_disable_unprepare(i2c_dev->clk);
+
+	if (ret >= 0)
+		clk_disable_unprepare(i2c_dev->clk);
 
 	pm_runtime_put_noidle(i2c_dev->dev);
 	pm_runtime_disable(i2c_dev->dev);
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index f0a7531..2d240bf 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -6,6 +6,7 @@ config EEPROM_AT24
 	depends on I2C && SYSFS
 	select NVMEM
 	select NVMEM_SYSFS
+	select REGMAP
 	select REGMAP_I2C
 	help
 	  Enable this driver to get read/write support to most I2C EEPROMs
