diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index a750f01..be6eb4c 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -22,7 +22,7 @@ use File::Temp qw/ tempdir /;
 use IO::Handle;
 
 @components = ( "sp8870", "sp887x", "tda10045", "tda10046", "av7110", "dec2000t",
-		"dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002",
+		"dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
 		"or51211", "or51132_qam", "or51132_vsb");
 
 # Check args
@@ -252,6 +252,23 @@ sub nxt2002 {
     $outfile;
 }
 
+sub nxt2004 {
+    my $sourcefile = "AVerTVHD_MCE_A180_Drv_v1.2.2.16.zip";
+    my $url = "http://www.aver.com/support/Drivers/$sourcefile";
+    my $hash = "111cb885b1e009188346d72acfed024c";
+    my $outfile = "dvb-fe-nxt2004.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+
+    wgetfile($sourcefile, $url);
+    unzip($sourcefile, $tmpdir);
+    verify("$tmpdir/3xHybrid.sys", $hash);
+    extract("$tmpdir/3xHybrid.sys", 465304, 9584, $outfile);
+
+    $outfile;
+}
+
 sub or51211 {
     my $fwfile = "dvb-fe-or51211.fw";
     my $url = "http://linuxtv.org/downloads/firmware/$fwfile";
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index a50a41f..8e269e1 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -164,6 +164,14 @@ config DVB_NXT2002
 	help
 	  An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
 
+config DVB_NXT200X
+	tristate "Nextwave NXT2002/NXT2004 based"
+	depends on DVB_CORE
+	select FW_LOADER
+	help
+	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
+	  to support this frontend.
+
 config DVB_OR51211
 	tristate "or51211 based (pcHDTV HD2000 card)"
 	depends on DVB_CORE
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index ad8658f..1692ee6 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_DVB_TDA80XX) += tda80xx.o
 obj-$(CONFIG_DVB_TDA10021) += tda10021.o
 obj-$(CONFIG_DVB_STV0297) += stv0297.o
 obj-$(CONFIG_DVB_NXT2002) += nxt2002.o
+obj-$(CONFIG_DVB_NXT2002) += nxt200x.o
 obj-$(CONFIG_DVB_OR51211) += or51211.o
 obj-$(CONFIG_DVB_OR51132) += or51132.o
 obj-$(CONFIG_DVB_BCM3510) += bcm3510.o
diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c
index 6ba7433..f857b86 100644
--- a/drivers/media/dvb/frontends/dvb-pll.c
+++ b/drivers/media/dvb/frontends/dvb-pll.c
@@ -314,7 +314,7 @@ EXPORT_SYMBOL(dvb_pll_tdhu2);
  */
 struct dvb_pll_desc dvb_pll_tuv1236d = {
 	.name  = "Philips TUV1236D",
-	.min   =  57000000,
+	.min   =  54000000,
 	.max   = 864000000,
 	.count = 3,
 	.entries = {
diff --git a/drivers/media/dvb/frontends/nxt200x.c b/drivers/media/dvb/frontends/nxt200x.c
new file mode 100644
index 0000000..1d729be
--- /dev/null
+++ b/drivers/media/dvb/frontends/nxt200x.c
@@ -0,0 +1,1203 @@
+/*
+ *    Support for NXT2002 and NXT2004 - VSB/QAM
+ *
+ *    Copyright (C) 2005 Kirk Lapray (kirk.lapray@gmail.com)
+ *    based on nxt2002 by Taylor Jacob <rtjacob@earthlink.net>
+ *    and nxt2004 by Jean-Francois Thibert (jeanfrancois@sagetv.com)
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+*/
+
+/*
+ *                      NOTES ABOUT THIS DRIVER
+ *
+ * This Linux driver supports:
+ *   B2C2/BBTI Technisat Air2PC - ATSC (NXT2002)
+ *   AverTVHD MCE A180 (NXT2004)
+ *   ATI HDTV Wonder (NXT2004)
+ *
+ * This driver needs external firmware. Please use the command
+ * "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2002" or
+ * "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2004" to
+ * download/extract the appropriate firmware, and then copy it to
+ * /usr/lib/hotplug/firmware/ or /lib/firmware/
+ * (depending on configuration of firmware hotplug).
+ */
+#define NXT2002_DEFAULT_FIRMWARE "dvb-fe-nxt2002.fw"
+#define NXT2004_DEFAULT_FIRMWARE "dvb-fe-nxt2004.fw"
+#define CRC_CCIT_MASK 0x1021
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+#include "dvb_frontend.h"
+#include "dvb-pll.h"
+#include "nxt200x.h"
+
+struct nxt200x_state {
+
+	struct i2c_adapter* i2c;
+	struct dvb_frontend_ops ops;
+	const struct nxt200x_config* config;
+	struct dvb_frontend frontend;
+
+	/* demodulator private data */
+	nxt_chip_type demod_chip;
+	u8 initialised:1;
+};
+
+static int debug;
+#define dprintk(args...) \
+	do { \
+		if (debug) printk(KERN_DEBUG "nxt200x: " args); \
+	} while (0)
+
+static int i2c_writebytes (struct nxt200x_state* state, u8 addr, u8 *buf, u8 len)
+{
+	int err;
+	struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = len };
+
+	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
+		printk (KERN_WARNING "nxt200x: %s: i2c write error (addr 0x%02x, err == %i)\n",
+			__FUNCTION__, addr, err);
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static u8 i2c_readbytes (struct nxt200x_state* state, u8 addr, u8* buf, u8 len)
+{
+	int err;
+	struct i2c_msg msg = { .addr = addr, .flags = I2C_M_RD, .buf = buf, .len = len };
+
+	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
+		printk (KERN_WARNING "nxt200x: %s: i2c read error (addr 0x%02x, err == %i)\n",
+			__FUNCTION__, addr, err);
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static int nxt200x_writebytes (struct nxt200x_state* state, u8 reg, u8 *buf, u8 len)
+{
+	u8 buf2 [len+1];
+	int err;
+	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf2, .len = len + 1 };
+
+	buf2[0] = reg;
+	memcpy(&buf2[1], buf, len);
+
+	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
+		printk (KERN_WARNING "nxt200x: %s: i2c write error (addr 0x%02x, err == %i)\n",
+			__FUNCTION__, state->config->demod_address, err);
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static u8 nxt200x_readbytes (struct nxt200x_state* state, u8 reg, u8* buf, u8 len)
+{
+	u8 reg2 [] = { reg };
+
+	struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = reg2, .len = 1 },
+			{ .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = len } };
+
+	int err;
+
+	if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) {
+		printk (KERN_WARNING "nxt200x: %s: i2c read error (addr 0x%02x, err == %i)\n",
+			__FUNCTION__, state->config->demod_address, err);
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static u16 nxt200x_crc(u16 crc, u8 c)
+{
+	u8 i;
+	u16 input = (u16) c & 0xFF;
+
+	input<<=8;
+	for(i=0; i<8; i++) {
+		if((crc^input) & 0x8000)
+			crc=(crc<<1)^CRC_CCIT_MASK;
+		else
+			crc<<=1;
+		input<<=1;
+	}
+	return crc;
+}
+
+static int nxt200x_writereg_multibyte (struct nxt200x_state* state, u8 reg, u8* data, u8 len)
+{
+	u8 attr, len2, buf;
+	dprintk("%s\n", __FUNCTION__);
+
+	/* set mutli register register */
+	nxt200x_writebytes(state, 0x35, &reg, 1);
+
+	/* send the actual data */
+	nxt200x_writebytes(state, 0x36, data, len);
+
+	switch (state->demod_chip) {
+		case NXT2002:
+			len2 = len;
+			buf = 0x02;
+			break;
+		case NXT2004:
+			/* probably not right, but gives correct values */
+			attr = 0x02;
+			if (reg & 0x80) {
+				attr = attr << 1;
+				if (reg & 0x04)
+					attr = attr >> 1;
+			}
+			/* set write bit */
+			len2 = ((attr << 4) | 0x10) | len;
+			buf = 0x80;
+			break;
+		default:
+			return -EINVAL;
+			break;
+	}
+
+	/* set multi register length */
+	nxt200x_writebytes(state, 0x34, &len2, 1);
+
+	/* toggle the multireg write bit */
+	nxt200x_writebytes(state, 0x21, &buf, 1);
+
+	nxt200x_readbytes(state, 0x21, &buf, 1);
+
+	switch (state->demod_chip) {
+		case NXT2002:
+			if ((buf & 0x02) == 0)
+				return 0;
+			break;
+		case NXT2004:
+			if (buf == 0)
+				return 0;
+			break;
+		default:
+			return -EINVAL;
+			break;
+	}
+
+	printk(KERN_WARNING "nxt200x: Error writing multireg register 0x%02X\n",reg);
+
+	return 0;
+}
+
+static int nxt200x_readreg_multibyte (struct nxt200x_state* state, u8 reg, u8* data, u8 len)
+{
+	int i;
+	u8 buf, len2, attr;
+	dprintk("%s\n", __FUNCTION__);
+
+	/* set mutli register register */
+	nxt200x_writebytes(state, 0x35, &reg, 1);
+
+	switch (state->demod_chip) {
+		case NXT2002:
+			/* set multi register length */
+			len2 = len & 0x80;
+			nxt200x_writebytes(state, 0x34, &len2, 1);
+
+			/* read the actual data */
+			nxt200x_readbytes(state, reg, data, len);
+			return 0;
+			break;
+		case NXT2004:
+			/* probably not right, but gives correct values */
+			attr = 0x02;
+			if (reg & 0x80) {
+				attr = attr << 1;
+				if (reg & 0x04)
+					attr = attr >> 1;
+			}
+
+			/* set multi register length */
+			len2 = (attr << 4) | len;
+			nxt200x_writebytes(state, 0x34, &len2, 1);
+
+			/* toggle the multireg bit*/
+			buf = 0x80;
+			nxt200x_writebytes(state, 0x21, &buf, 1);
+
+			/* read status */
+			nxt200x_readbytes(state, 0x21, &buf, 1);
+
+			if (buf == 0)
+			{
+				/* read the actual data */
+				for(i = 0; i < len; i++) {
+                    nxt200x_readbytes(state, 0x36 + i, &data[i], 1);
+				}
+				return 0;
+			}
+			break;
+		default:
+			return -EINVAL;
+			break;
+	}
+
+	printk(KERN_WARNING "nxt200x: Error reading multireg register 0x%02X\n",reg);
+
+	return 0;
+}
+
+static void nxt200x_microcontroller_stop (struct nxt200x_state* state)
+{
+	u8 buf, stopval, counter = 0;
+	dprintk("%s\n", __FUNCTION__);
+
+	/* set correct stop value */
+	switch (state->demod_chip) {
+		case NXT2002:
+			stopval = 0x40;
+			break;
+		case NXT2004:
+			stopval = 0x10;
+			break;
+		default:
+			stopval = 0;
+			break;
+	}
+
+	buf = 0x80;
+	nxt200x_writebytes(state, 0x22, &buf, 1);
+
+	while (counter < 20) {
+		nxt200x_readbytes(state, 0x31, &buf, 1);
+		if (buf & stopval)
+			return;
+		msleep(10);
+		counter++;
+	}
+
+	printk(KERN_WARNING "nxt200x: Timeout waiting for nxt200x to stop. This is ok after firmware upload.\n");
+	return;
+}
+
+static void nxt200x_microcontroller_start (struct nxt200x_state* state)
+{
+	u8 buf;
+	dprintk("%s\n", __FUNCTION__);
+
+	buf = 0x00;
+	nxt200x_writebytes(state, 0x22, &buf, 1);
+}
+
+static void nxt2004_microcontroller_init (struct nxt200x_state* state)
+{
+	u8 buf[9];
+	u8 counter = 0;
+	dprintk("%s\n", __FUNCTION__);
+
+	buf[0] = 0x00;
+	nxt200x_writebytes(state, 0x2b, buf, 1);
+	buf[0] = 0x70;
+	nxt200x_writebytes(state, 0x34, buf, 1);
+	buf[0] = 0x04;
+	nxt200x_writebytes(state, 0x35, buf, 1);
+	buf[0] = 0x01; buf[1] = 0x23; buf[2] = 0x45; buf[3] = 0x67; buf[4] = 0x89;
+	buf[5] = 0xAB; buf[6] = 0xCD; buf[7] = 0xEF; buf[8] = 0xC0;
+	nxt200x_writebytes(state, 0x36, buf, 9);
+	buf[0] = 0x80;
+	nxt200x_writebytes(state, 0x21, buf, 1);
+
+	while (counter < 20) {
+		nxt200x_readbytes(state, 0x21, buf, 1);
+		if (buf[0] == 0)
+			return;
+		msleep(10);
+		counter++;
+	}
+
+	printk(KERN_WARNING "nxt200x: Timeout waiting for nxt2004 to init.\n");
+
+	return;
+}
+
+static int nxt200x_writetuner (struct nxt200x_state* state, u8* data)
+{
+	u8 buf, count = 0;
+
+	dprintk("%s\n", __FUNCTION__);
+
+	dprintk("Tuner Bytes: %02X %02X %02X %02X\n", data[0], data[1], data[2], data[3]);
+
+	/* if pll is a Philips TUV1236D then write directly to tuner */
+	if (strcmp(state->config->pll_desc->name, "Philips TUV1236D") == 0) {
+	        if (i2c_writebytes(state, state->config->pll_address, data, 4))
+        	        printk(KERN_WARNING "nxt200x: error writing to tuner\n");
+		/* wait until we have a lock */
+		while (count < 20) {
+			i2c_readbytes(state, state->config->pll_address, &buf, 1);
+			if (buf & 0x40)
+				return 0;
+			msleep(100);
+			count++;
+		}
+		printk("nxt200x: timeout waiting for tuner lock\n");
+		return 0;
+	} else {
+		/* set the i2c transfer speed to the tuner */
+		buf = 0x03;
+		nxt200x_writebytes(state, 0x20, &buf, 1);
+
+		/* setup to transfer 4 bytes via i2c */
+		buf = 0x04;
+		nxt200x_writebytes(state, 0x34, &buf, 1);
+
+		/* write actual tuner bytes */
+		nxt200x_writebytes(state, 0x36, data, 4);
+
+		/* set tuner i2c address */
+		buf = state->config->pll_address;
+		nxt200x_writebytes(state, 0x35, &buf, 1);
+
+		/* write UC Opmode to begin transfer */
+		buf = 0x80;
+		nxt200x_writebytes(state, 0x21, &buf, 1);
+
+		while (count < 20) {
+			nxt200x_readbytes(state, 0x21, &buf, 1);
+			if ((buf & 0x80)== 0x00)
+				return 0;
+			msleep(100);
+			count++;
+		}
+		printk("nxt200x: timeout error writing tuner\n");
+		return 0;
+	}
+}
+
+static void nxt200x_agc_reset(struct nxt200x_state* state)
+{
+	u8 buf;
+	dprintk("%s\n", __FUNCTION__);
+
+	switch (state->demod_chip) {
+		case NXT2002:
+			buf = 0x08;
+			nxt200x_writebytes(state, 0x08, &buf, 1);
+			buf = 0x00;
+			nxt200x_writebytes(state, 0x08, &buf, 1);
+			break;
+		case NXT2004:
+			nxt200x_readreg_multibyte(state, 0x08, &buf, 1);
+			buf = 0x08;
+			nxt200x_writereg_multibyte(state, 0x08, &buf, 1);
+			buf = 0x00;
+			nxt200x_writereg_multibyte(state, 0x08, &buf, 1);
+			break;
+		default:
+			break;
+	}
+	return;
+}
+
+static int nxt2002_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
+{
+
+	struct nxt200x_state* state = fe->demodulator_priv;
+	u8 buf[3], written = 0, chunkpos = 0;
+	u16 rambase, position, crc = 0;
+
+	dprintk("%s\n", __FUNCTION__);
+	dprintk("Firmware is %zu bytes\n", fw->size);
+
+	/* Get the RAM base for this nxt2002 */
+	nxt200x_readbytes(state, 0x10, buf, 1);
+
+	if (buf[0] & 0x10)
+		rambase = 0x1000;
+	else
+		rambase = 0x0000;
+
+	dprintk("rambase on this nxt2002 is %04X\n", rambase);
+
+	/* Hold the micro in reset while loading firmware */
+	buf[0] = 0x80;
+	nxt200x_writebytes(state, 0x2B, buf, 1);
+
+	for (position = 0; position < fw->size; position++) {
+		if (written == 0) {
+			crc = 0;
+			chunkpos = 0x28;
+			buf[0] = ((rambase + position) >> 8);
+			buf[1] = (rambase + position) & 0xFF;
+			buf[2] = 0x81;
+			/* write starting address */
+			nxt200x_writebytes(state, 0x29, buf, 3);
+		}
+		written++;
+		chunkpos++;
+
+		if ((written % 4) == 0)
+			nxt200x_writebytes(state, chunkpos, &fw->data[position-3], 4);
+
+		crc = nxt200x_crc(crc, fw->data[position]);
+
+		if ((written == 255) || (position+1 == fw->size)) {
+			/* write remaining bytes of firmware */
+			nxt200x_writebytes(state, chunkpos+4-(written %4),
+				&fw->data[position-(written %4) + 1],
+				written %4);
+			buf[0] = crc << 8;
+			buf[1] = crc & 0xFF;
+
+			/* write crc */
+			nxt200x_writebytes(state, 0x2C, buf, 2);
+
+			/* do a read to stop things */
+			nxt200x_readbytes(state, 0x2A, buf, 1);
+
+			/* set transfer mode to complete */
+			buf[0] = 0x80;
+			nxt200x_writebytes(state, 0x2B, buf, 1);
+
+			written = 0;
+		}
+	}
+
+	return 0;
+};
+
+static int nxt2004_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
+{
+
+	struct nxt200x_state* state = fe->demodulator_priv;
+	u8 buf[3];
+	u16 rambase, position, crc=0;
+
+	dprintk("%s\n", __FUNCTION__);
+	dprintk("Firmware is %zu bytes\n", fw->size);
+
+	/* set rambase */
+	rambase = 0x1000;
+
+	/* hold the micro in reset while loading firmware */
+	buf[0] = 0x80;
+	nxt200x_writebytes(state, 0x2B, buf,1);
+
+	/* calculate firmware CRC */
+	for (position = 0; position < fw->size; position++) {
+	        crc = nxt200x_crc(crc, fw->data[position]);
+	}
+
+	buf[0] = rambase >> 8;
+	buf[1] = rambase & 0xFF;
+	buf[2] = 0x81;
+	/* write starting address */
+	nxt200x_writebytes(state,0x29,buf,3);
+
+	for (position = 0; position < fw->size;) {
+		nxt200x_writebytes(state, 0x2C, &fw->data[position],
+			fw->size-position > 255 ? 255 : fw->size-position);
+		position += (fw->size-position > 255 ? 255 : fw->size-position);
+	}
+	buf[0] = crc >> 8;
+	buf[1] = crc & 0xFF;
+
+	dprintk("firmware crc is 0x%02X 0x%02X\n", buf[0], buf[1]);
+
+	/* write crc */
+	nxt200x_writebytes(state, 0x2C, buf,2);
+
+	/* do a read to stop things */
+	nxt200x_readbytes(state, 0x2C, buf, 1);
+
+	/* set transfer mode to complete */
+	buf[0] = 0x80;
+	nxt200x_writebytes(state, 0x2B, buf,1);
+
+	return 0;
+};
+
+static int nxt200x_setup_frontend_parameters (struct dvb_frontend* fe,
+					     struct dvb_frontend_parameters *p)
+{
+	struct nxt200x_state* state = fe->demodulator_priv;
+	u8 buf[4];
+
+	/* stop the micro first */
+	nxt200x_microcontroller_stop(state);
+
+	if (state->demod_chip == NXT2004) {
+		/* make sure demod is set to digital */
+		buf[0] = 0x04;
+		nxt200x_writebytes(state, 0x14, buf, 1);
+		buf[0] = 0x00;
+		nxt200x_writebytes(state, 0x17, buf, 1);
+	}
+
+	/* get tuning information */
+	dvb_pll_configure(state->config->pll_desc, buf, p->frequency, 0);
+
+	/* set additional params */
+	switch (p->u.vsb.modulation) {
+		case QAM_64:
+		case QAM_256:
+			/* Set punctured clock for QAM */
+			/* This is just a guess since I am unable to test it */
+			state->config->set_ts_params(fe, 1);
+
+			/* set to use cable input */
+			buf[3] |= 0x08;
+			break;
+		case VSB_8:
+			/* Set non-punctured clock for VSB */
+			state->config->set_ts_params(fe, 0);
+			break;
+		default:
+			return -EINVAL;
+			break;
+	}
+
+	/* write frequency information */
+	nxt200x_writetuner(state, buf);
+
+	/* reset the agc now that tuning has been completed */
+	nxt200x_agc_reset(state);
+
+	/* set target power level */
+	switch (p->u.vsb.modulation) {
+		case QAM_64:
+		case QAM_256:
+			buf[0] = 0x74;
+			break;
+		case VSB_8:
+			buf[0] = 0x70;
+			break;
+		default:
+			return -EINVAL;
+			break;
+	}
+	nxt200x_writebytes(state, 0x42, buf, 1);
+
+	/* configure sdm */
+	switch (state->demod_chip) {
+		case NXT2002:
+			buf[0] = 0x87;
+			break;
+		case NXT2004:
+			buf[0] = 0x07;
+			break;
+		default:
+			return -EINVAL;
+			break;
+	}
+	nxt200x_writebytes(state, 0x57, buf, 1);
+
+	/* write sdm1 input */
+	buf[0] = 0x10;
+	buf[1] = 0x00;
+	nxt200x_writebytes(state, 0x58, buf, 2);
+
+	/* write sdmx input */
+	switch (p->u.vsb.modulation) {
+		case QAM_64:
+				buf[0] = 0x68;
+				break;
+		case QAM_256:
+				buf[0] = 0x64;
+				break;
+		case VSB_8:
+				buf[0] = 0x60;
+				break;
+		default:
+				return -EINVAL;
+				break;
+	}
+	buf[1] = 0x00;
+	nxt200x_writebytes(state, 0x5C, buf, 2);
+
+	/* write adc power lpf fc */
+	buf[0] = 0x05;
+	nxt200x_writebytes(state, 0x43, buf, 1);
+
+	if (state->demod_chip == NXT2004) {
+		/* write ??? */
+		buf[0] = 0x00;
+		buf[1] = 0x00;
+		nxt200x_writebytes(state, 0x46, buf, 2);
+	}
+
+	/* write accumulator2 input */
+	buf[0] = 0x80;
+	buf[1] = 0x00;
+	nxt200x_writebytes(state, 0x4B, buf, 2);
+
+	/* write kg1 */
+	buf[0] = 0x00;
+	nxt200x_writebytes(state, 0x4D, buf, 1);
+
+	/* write sdm12 lpf fc */
+	buf[0] = 0x44;
+	nxt200x_writebytes(state, 0x55, buf, 1);
+
+	/* write agc control reg */
+	buf[0] = 0x04;
+	nxt200x_writebytes(state, 0x41, buf, 1);
+
+	if (state->demod_chip == NXT2004) {
+		nxt200x_readreg_multibyte(state, 0x80, buf, 1);
+		buf[0] = 0x24;
+		nxt200x_writereg_multibyte(state, 0x80, buf, 1);
+
+		/* soft reset? */
+		nxt200x_readreg_multibyte(state, 0x08, buf, 1);
+		buf[0] = 0x10;
+		nxt200x_writereg_multibyte(state, 0x08, buf, 1);
+		nxt200x_readreg_multibyte(state, 0x08, buf, 1);
+		buf[0] = 0x00;
+		nxt200x_writereg_multibyte(state, 0x08, buf, 1);
+
+		nxt200x_readreg_multibyte(state, 0x80, buf, 1);
+		buf[0] = 0x04;
+		nxt200x_writereg_multibyte(state, 0x80, buf, 1);
+		buf[0] = 0x00;
+		nxt200x_writereg_multibyte(state, 0x81, buf, 1);
+		buf[0] = 0x80; buf[1] = 0x00; buf[2] = 0x00;
+		nxt200x_writereg_multibyte(state, 0x82, buf, 3);
+		nxt200x_readreg_multibyte(state, 0x88, buf, 1);
+		buf[0] = 0x11;
+		nxt200x_writereg_multibyte(state, 0x88, buf, 1);
+		nxt200x_readreg_multibyte(state, 0x80, buf, 1);
+		buf[0] = 0x44;
+		nxt200x_writereg_multibyte(state, 0x80, buf, 1);
+	}
+
+	/* write agc ucgp0 */
+	switch (p->u.vsb.modulation) {
+		case QAM_64:
+				buf[0] = 0x02;
+				break;
+		case QAM_256:
+				buf[0] = 0x03;
+				break;
+		case VSB_8:
+				buf[0] = 0x00;
+				break;
+		default:
+				return -EINVAL;
+				break;
+	}
+	nxt200x_writebytes(state, 0x30, buf, 1);
+
+	/* write agc control reg */
+	buf[0] = 0x00;
+	nxt200x_writebytes(state, 0x41, buf, 1);
+
+	/* write accumulator2 input */
+	buf[0] = 0x80;
+	buf[1] = 0x00;
+	nxt200x_writebytes(state, 0x49, buf,2);
+	nxt200x_writebytes(state, 0x4B, buf,2);
+
+	/* write agc control reg */
+	buf[0] = 0x04;
+	nxt200x_writebytes(state, 0x41, buf, 1);
+
+	nxt200x_microcontroller_start(state);
+
+	if (state->demod_chip == NXT2004) {
+		nxt2004_microcontroller_init(state);
+
+		/* ???? */
+		buf[0] = 0xF0;
+		buf[1] = 0x00;
+		nxt200x_writebytes(state, 0x5C, buf, 2);
+	}
+
+	/* adjacent channel detection should be done here, but I don't
+	have any stations with this need so I cannot test it */
+
+	return 0;
+}
+
+static int nxt200x_read_status(struct dvb_frontend* fe, fe_status_t* status)
+{
+	struct nxt200x_state* state = fe->demodulator_priv;
+	u8 lock;
+	nxt200x_readbytes(state, 0x31, &lock, 1);
+
+	*status = 0;
+	if (lock & 0x20) {
+		*status |= FE_HAS_SIGNAL;
+		*status |= FE_HAS_CARRIER;
+		*status |= FE_HAS_VITERBI;
+		*status |= FE_HAS_SYNC;
+		*status |= FE_HAS_LOCK;
+	}
+	return 0;
+}
+
+static int nxt200x_read_ber(struct dvb_frontend* fe, u32* ber)
+{
+	struct nxt200x_state* state = fe->demodulator_priv;
+	u8 b[3];
+
+	nxt200x_readreg_multibyte(state, 0xE6, b, 3);
+
+	*ber = ((b[0] << 8) + b[1]) * 8;
+
+	return 0;
+}
+
+static int nxt200x_read_signal_strength(struct dvb_frontend* fe, u16* strength)
+{
+	struct nxt200x_state* state = fe->demodulator_priv;
+	u8 b[2];
+	u16 temp = 0;
+
+	/* setup to read cluster variance */
+	b[0] = 0x00;
+	nxt200x_writebytes(state, 0xA1, b, 1);
+
+	/* get multreg val */
+	nxt200x_readreg_multibyte(state, 0xA6, b, 2);
+
+	temp = (b[0] << 8) | b[1];
+	*strength = ((0x7FFF - temp) & 0x0FFF) * 16;
+
+	return 0;
+}
+
+static int nxt200x_read_snr(struct dvb_frontend* fe, u16* snr)
+{
+
+	struct nxt200x_state* state = fe->demodulator_priv;
+	u8 b[2];
+	u16 temp = 0, temp2;
+	u32 snrdb = 0;
+
+	/* setup to read cluster variance */
+	b[0] = 0x00;
+	nxt200x_writebytes(state, 0xA1, b, 1);
+
+	/* get multreg val from 0xA6 */
+	nxt200x_readreg_multibyte(state, 0xA6, b, 2);
+
+	temp = (b[0] << 8) | b[1];
+	temp2 = 0x7FFF - temp;
+
+	/* snr will be in db */
+	if (temp2 > 0x7F00)
+		snrdb = 1000*24 + ( 1000*(30-24) * ( temp2 - 0x7F00 ) / ( 0x7FFF - 0x7F00 ) );
+	else if (temp2 > 0x7EC0)
+		snrdb = 1000*18 + ( 1000*(24-18) * ( temp2 - 0x7EC0 ) / ( 0x7F00 - 0x7EC0 ) );
+	else if (temp2 > 0x7C00)
+		snrdb = 1000*12 + ( 1000*(18-12) * ( temp2 - 0x7C00 ) / ( 0x7EC0 - 0x7C00 ) );
+	else
+		snrdb = 1000*0 + ( 1000*(12-0) * ( temp2 - 0 ) / ( 0x7C00 - 0 ) );
+
+	/* the value reported back from the frontend will be FFFF=32db 0000=0db */
+	*snr = snrdb * (0xFFFF/32000);
+
+	return 0;
+}
+
+static int nxt200x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
+{
+	struct nxt200x_state* state = fe->demodulator_priv;
+	u8 b[3];
+
+	nxt200x_readreg_multibyte(state, 0xE6, b, 3);
+	*ucblocks = b[2];
+
+	return 0;
+}
+
+static int nxt200x_sleep(struct dvb_frontend* fe)
+{
+	return 0;
+}
+
+static int nxt2002_init(struct dvb_frontend* fe)
+{
+	struct nxt200x_state* state = fe->demodulator_priv;
+	const struct firmware *fw;
+	int ret;
+	u8 buf[2];
+
+	/* request the firmware, this will block until someone uploads it */
+	printk("nxt2002: Waiting for firmware upload (%s)...\n", NXT2002_DEFAULT_FIRMWARE);
+	ret = request_firmware(&fw, NXT2002_DEFAULT_FIRMWARE, &state->i2c->dev);
+	printk("nxt2002: Waiting for firmware upload(2)...\n");
+	if (ret) {
+		printk("nxt2002: No firmware uploaded (timeout or file not found?)\n");
+		return ret;
+	}
+
+	ret = nxt2002_load_firmware(fe, fw);
+	if (ret) {
+		printk("nxt2002: Writing firmware to device failed\n");
+		release_firmware(fw);
+		return ret;
+	}
+	printk("nxt2002: Firmware upload complete\n");
+
+	/* Put the micro into reset */
+	nxt200x_microcontroller_stop(state);
+
+	/* ensure transfer is complete */
+	buf[0]=0x00;
+	nxt200x_writebytes(state, 0x2B, buf, 1);
+
+	/* Put the micro into reset for real this time */
+	nxt200x_microcontroller_stop(state);
+
+	/* soft reset everything (agc,frontend,eq,fec)*/
+	buf[0] = 0x0F;
+	nxt200x_writebytes(state, 0x08, buf, 1);
+	buf[0] = 0x00;
+	nxt200x_writebytes(state, 0x08, buf, 1);
+
+	/* write agc sdm configure */
+	buf[0] = 0xF1;
+	nxt200x_writebytes(state, 0x57, buf, 1);
+
+	/* write mod output format */
+	buf[0] = 0x20;
+	nxt200x_writebytes(state, 0x09, buf, 1);
+
+	/* write fec mpeg mode */
+	buf[0] = 0x7E;
+	buf[1] = 0x00;
+	nxt200x_writebytes(state, 0xE9, buf, 2);
+
+	/* write mux selection */
+	buf[0] = 0x00;
+	nxt200x_writebytes(state, 0xCC, buf, 1);
+
+	return 0;
+}
+
+static int nxt2004_init(struct dvb_frontend* fe)
+{
+	struct nxt200x_state* state = fe->demodulator_priv;
+	const struct firmware *fw;
+	int ret;
+	u8 buf[3];
+
+	/* ??? */
+	buf[0]=0x00;
+	nxt200x_writebytes(state, 0x1E, buf, 1);
+
+	/* request the firmware, this will block until someone uploads it */
+	printk("nxt2004: Waiting for firmware upload (%s)...\n", NXT2004_DEFAULT_FIRMWARE);
+	ret = request_firmware(&fw, NXT2004_DEFAULT_FIRMWARE, &state->i2c->dev);
+	printk("nxt2004: Waiting for firmware upload(2)...\n");
+	if (ret) {
+		printk("nxt2004: No firmware uploaded (timeout or file not found?)\n");
+		return ret;
+	}
+
+	ret = nxt2004_load_firmware(fe, fw);
+	if (ret) {
+		printk("nxt2004: Writing firmware to device failed\n");
+		release_firmware(fw);
+		return ret;
+	}
+	printk("nxt2004: Firmware upload complete\n");
+
+	/* ensure transfer is complete */
+	buf[0] = 0x01;
+	nxt200x_writebytes(state, 0x19, buf, 1);
+
+	nxt2004_microcontroller_init(state);
+	nxt200x_microcontroller_stop(state);
+	nxt200x_microcontroller_stop(state);
+	nxt2004_microcontroller_init(state);
+	nxt200x_microcontroller_stop(state);
+
+	/* soft reset everything (agc,frontend,eq,fec)*/
+	buf[0] = 0xFF;
+	nxt200x_writereg_multibyte(state, 0x08, buf, 1);
+	buf[0] = 0x00;
+	nxt200x_writereg_multibyte(state, 0x08, buf, 1);
+
+	/* write agc sdm configure */
+	buf[0] = 0xD7;
+	nxt200x_writebytes(state, 0x57, buf, 1);
+
+	/* ???*/
+	buf[0] = 0x07;
+	buf[1] = 0xfe;
+	nxt200x_writebytes(state, 0x35, buf, 2);
+	buf[0] = 0x12;
+	nxt200x_writebytes(state, 0x34, buf, 1);
+	buf[0] = 0x80;
+	nxt200x_writebytes(state, 0x21, buf, 1);
+
+	/* ???*/
+	buf[0] = 0x21;
+	nxt200x_writebytes(state, 0x0A, buf, 1);
+
+	/* ???*/
+	buf[0] = 0x01;
+	nxt200x_writereg_multibyte(state, 0x80, buf, 1);
+
+	/* write fec mpeg mode */
+	buf[0] = 0x7E;
+	buf[1] = 0x00;
+	nxt200x_writebytes(state, 0xE9, buf, 2);
+
+	/* write mux selection */
+	buf[0] = 0x00;
+	nxt200x_writebytes(state, 0xCC, buf, 1);
+
+	/* ???*/
+	nxt200x_readreg_multibyte(state, 0x80, buf, 1);
+	buf[0] = 0x00;
+	nxt200x_writereg_multibyte(state, 0x80, buf, 1);
+
+	/* soft reset? */
+	nxt200x_readreg_multibyte(state, 0x08, buf, 1);
+	buf[0] = 0x10;
+	nxt200x_writereg_multibyte(state, 0x08, buf, 1);
+	nxt200x_readreg_multibyte(state, 0x08, buf, 1);
+	buf[0] = 0x00;
+	nxt200x_writereg_multibyte(state, 0x08, buf, 1);
+
+	/* ???*/
+	nxt200x_readreg_multibyte(state, 0x80, buf, 1);
+	buf[0] = 0x01;
+	nxt200x_writereg_multibyte(state, 0x80, buf, 1);
+	buf[0] = 0x70;
+	nxt200x_writereg_multibyte(state, 0x81, buf, 1);
+	buf[0] = 0x31; buf[1] = 0x5E; buf[2] = 0x66;
+	nxt200x_writereg_multibyte(state, 0x82, buf, 3);
+
+	nxt200x_readreg_multibyte(state, 0x88, buf, 1);
+	buf[0] = 0x11;
+	nxt200x_writereg_multibyte(state, 0x88, buf, 1);
+	nxt200x_readreg_multibyte(state, 0x80, buf, 1);
+	buf[0] = 0x40;
+	nxt200x_writereg_multibyte(state, 0x80, buf, 1);
+
+	nxt200x_readbytes(state, 0x10, buf, 1);
+	buf[0] = 0x10;
+	nxt200x_writebytes(state, 0x10, buf, 1);
+	nxt200x_readbytes(state, 0x0A, buf, 1);
+	buf[0] = 0x21;
+	nxt200x_writebytes(state, 0x0A, buf, 1);
+
+	nxt2004_microcontroller_init(state);
+
+	buf[0] = 0x21;
+	nxt200x_writebytes(state, 0x0A, buf, 1);
+	buf[0] = 0x7E;
+	nxt200x_writebytes(state, 0xE9, buf, 1);
+	buf[0] = 0x00;
+	nxt200x_writebytes(state, 0xEA, buf, 1);
+
+	nxt200x_readreg_multibyte(state, 0x80, buf, 1);
+	buf[0] = 0x00;
+	nxt200x_writereg_multibyte(state, 0x80, buf, 1);
+	nxt200x_readreg_multibyte(state, 0x80, buf, 1);
+	buf[0] = 0x00;
+	nxt200x_writereg_multibyte(state, 0x80, buf, 1);
+
+	/* soft reset? */
+	nxt200x_readreg_multibyte(state, 0x08, buf, 1);
+	buf[0] = 0x10;
+	nxt200x_writereg_multibyte(state, 0x08, buf, 1);
+	nxt200x_readreg_multibyte(state, 0x08, buf, 1);
+	buf[0] = 0x00;
+	nxt200x_writereg_multibyte(state, 0x08, buf, 1);
+
+	nxt200x_readreg_multibyte(state, 0x80, buf, 1);
+	buf[0] = 0x04;
+	nxt200x_writereg_multibyte(state, 0x80, buf, 1);
+	buf[0] = 0x00;
+	nxt200x_writereg_multibyte(state, 0x81, buf, 1);
+	buf[0] = 0x80; buf[1] = 0x00; buf[2] = 0x00;
+	nxt200x_writereg_multibyte(state, 0x82, buf, 3);
+
+	nxt200x_readreg_multibyte(state, 0x88, buf, 1);
+	buf[0] = 0x11;
+	nxt200x_writereg_multibyte(state, 0x88, buf, 1);
+
+	nxt200x_readreg_multibyte(state, 0x80, buf, 1);
+	buf[0] = 0x44;
+	nxt200x_writereg_multibyte(state, 0x80, buf, 1);
+
+	/* initialize tuner */
+	nxt200x_readbytes(state, 0x10, buf, 1);
+	buf[0] = 0x12;
+	nxt200x_writebytes(state, 0x10, buf, 1);
+	buf[0] = 0x04;
+	nxt200x_writebytes(state, 0x13, buf, 1);
+	buf[0] = 0x00;
+	nxt200x_writebytes(state, 0x16, buf, 1);
+	buf[0] = 0x04;
+	nxt200x_writebytes(state, 0x14, buf, 1);
+	buf[0] = 0x00;
+	nxt200x_writebytes(state, 0x14, buf, 1);
+	nxt200x_writebytes(state, 0x17, buf, 1);
+	nxt200x_writebytes(state, 0x14, buf, 1);
+	nxt200x_writebytes(state, 0x17, buf, 1);
+
+	return 0;
+}
+
+static int nxt200x_init(struct dvb_frontend* fe)
+{
+	struct nxt200x_state* state = fe->demodulator_priv;
+	int ret = 0;
+
+	if (!state->initialised) {
+		switch (state->demod_chip) {
+			case NXT2002:
+				ret = nxt2002_init(fe);
+				break;
+			case NXT2004:
+				ret = nxt2004_init(fe);
+				break;
+			default:
+				return -EINVAL;
+				break;
+		}
+		state->initialised = 1;
+	}
+	return ret;
+}
+
+static int nxt200x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
+{
+	fesettings->min_delay_ms = 500;
+	fesettings->step_size = 0;
+	fesettings->max_drift = 0;
+	return 0;
+}
+
+static void nxt200x_release(struct dvb_frontend* fe)
+{
+	struct nxt200x_state* state = fe->demodulator_priv;
+	kfree(state);
+}
+
+static struct dvb_frontend_ops nxt200x_ops;
+
+struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config,
+				   struct i2c_adapter* i2c)
+{
+	struct nxt200x_state* state = NULL;
+	u8 buf [] = {0,0,0,0,0};
+
+	/* allocate memory for the internal state */
+	state = (struct nxt200x_state*) kmalloc(sizeof(struct nxt200x_state), GFP_KERNEL);
+	if (state == NULL)
+		goto error;
+	memset(state,0,sizeof(*state));
+
+	/* setup the state */
+	state->config = config;
+	state->i2c = i2c;
+	memcpy(&state->ops, &nxt200x_ops, sizeof(struct dvb_frontend_ops));
+	state->initialised = 0;
+
+	/* read card id */
+	nxt200x_readbytes(state, 0x00, buf, 5);
+	dprintk("NXT info: %02X %02X %02X %02X %02X\n",
+		buf[0], buf[1], buf[2],	buf[3], buf[4]);
+
+	/* set demod chip */
+	switch (buf[0]) {
+		case 0x04:
+			state->demod_chip = NXT2002;
+			printk("nxt200x: NXT2002 Detected\n");
+			break;
+		case 0x05:
+			state->demod_chip = NXT2004;
+			printk("nxt200x: NXT2004 Detected\n");
+			break;
+		default:
+			goto error;
+	}
+
+	/* make sure demod chip is supported */
+	switch (state->demod_chip) {
+		case NXT2002:
+			if (buf[0] != 0x04) goto error;		/* device id */
+			if (buf[1] != 0x02) goto error;		/* fab id */
+			if (buf[2] != 0x11) goto error;		/* month */
+			if (buf[3] != 0x20) goto error;		/* year msb */
+			if (buf[4] != 0x00) goto error;		/* year lsb */
+			break;
+		case NXT2004:
+			if (buf[0] != 0x05) goto error;		/* device id */
+			break;
+		default:
+			goto error;
+	}
+
+	/* create dvb_frontend */
+	state->frontend.ops = &state->ops;
+	state->frontend.demodulator_priv = state;
+	return &state->frontend;
+
+error:
+	if (state)
+		kfree(state);
+	printk("Unknown/Unsupported NXT chip: %02X %02X %02X %02X %02X\n",
+		buf[0], buf[1], buf[2], buf[3], buf[4]);
+	return NULL;
+}
+
+static struct dvb_frontend_ops nxt200x_ops = {
+
+	.info = {
+		.name = "Nextwave NXT200X VSB/QAM frontend",
+		.type = FE_ATSC,
+		.frequency_min =  54000000,
+		.frequency_max = 860000000,
+		.frequency_stepsize = 166666,	/* stepsize is just a guess */
+		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+			FE_CAN_8VSB | FE_CAN_QAM_64 | FE_CAN_QAM_256
+	},
+
+	.release = nxt200x_release,
+
+	.init = nxt200x_init,
+	.sleep = nxt200x_sleep,
+
+	.set_frontend = nxt200x_setup_frontend_parameters,
+	.get_tune_settings = nxt200x_get_tune_settings,
+
+	.read_status = nxt200x_read_status,
+	.read_ber = nxt200x_read_ber,
+	.read_signal_strength = nxt200x_read_signal_strength,
+	.read_snr = nxt200x_read_snr,
+	.read_ucblocks = nxt200x_read_ucblocks,
+};
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+
+MODULE_DESCRIPTION("NXT200X (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver");
+MODULE_AUTHOR("Kirk Lapray, Jean-Francois Thibert, and Taylor Jacob");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(nxt200x_attach);
+
diff --git a/drivers/media/dvb/frontends/nxt200x.h b/drivers/media/dvb/frontends/nxt200x.h
new file mode 100644
index 0000000..8dc3f03
--- /dev/null
+++ b/drivers/media/dvb/frontends/nxt200x.h
@@ -0,0 +1,58 @@
+/*
+ *    Support for NXT2002 and NXT2004 - VSB/QAM
+ *
+ *    Copyright (C) 2005 Kirk Lapray (kirk.lapray@gmail.com)
+ *    based on nxt2002 by Taylor Jacob <rtjacob@earthlink.net>
+ *    and nxt2004 by Jean-Francois Thibert (jeanfrancois@sagetv.com)
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+*/
+
+#ifndef NXT200X_H
+#define NXT200X_H
+
+#include <linux/dvb/frontend.h>
+#include <linux/firmware.h>
+
+typedef enum nxt_chip_t {
+		NXTUNDEFINED,
+		NXT2002,
+		NXT2004
+}nxt_chip_type;
+
+struct nxt200x_config
+{
+	/* the demodulator's i2c address */
+	u8 demod_address;
+
+	/* tuner information */
+	u8 pll_address;
+	struct dvb_pll_desc *pll_desc;
+
+	/* need to set device param for start_dma */
+	int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
+};
+
+extern struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config,
+					   struct i2c_adapter* i2c);
+
+#endif /* NXT200X_H */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */