lis3: fix regression of HP DriveGuard with 8bit chip

05faadcf · Takashi Iwai <[email protected]> · 2011-10-03 18:09:14 -07:00

Commit 2a7fade7e03 ("hwmon: lis3: Power on corrections") caused a
regression on HP laptops with 8bit chip.  Writing CTRL2_BOOT_8B bit seems
clearing the BIOS setup, and no proper interrupt for DriveGuard will be
triggered any more.

Since the init code there is basically only for embedded devices, put a
pdata check so that the problematic initialization will be skipped for
hp_accel stuff.

Signed-off-by: Takashi Iwai <[email protected]>
Cc: Eric Piel <[email protected]>
Cc: Samu Onkalo <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

Commit: 05faadcf59507e8eea57ffbeea9cbb14c9a2ab3d
Parents: 0f86267b

Changes

1 files changed · +8 −6

File	Status	Add	Del	Content
drivers/misc/lis3lv02d/lis3lv02d.c	modified	+8	−6	View file

drivers/misc/lis3lv02d/lis3lv02d.c

View file

diff --git a/drivers/misc/lis3lv02d/lis3lv02d.c b/drivers/misc/lis3lv02d/lis3lv02d.c
index b928bc1..8b51cd6 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d.c
@@ -375,12 +375,14 @@ void lis3lv02d_poweron(struct lis3lv02d *lis3)
 	 *      both have been read. So the value read will always be correct.
 	 * Set BOOT bit to refresh factory tuning values.
 	 */
-	lis3->read(lis3, CTRL_REG2, &reg);
-	if (lis3->whoami ==  WAI_12B)
-		reg |= CTRL2_BDU | CTRL2_BOOT;
-	else
-		reg |= CTRL2_BOOT_8B;
-	lis3->write(lis3, CTRL_REG2, reg);
+	if (lis3->pdata) {
+		lis3->read(lis3, CTRL_REG2, &reg);
+		if (lis3->whoami ==  WAI_12B)
+			reg |= CTRL2_BDU | CTRL2_BOOT;
+		else
+			reg |= CTRL2_BOOT_8B;
+		lis3->write(lis3, CTRL_REG2, reg);
+	}
 
 	/* LIS3 power on delay is quite long */
 	msleep(lis3->pwron_delay / lis3lv02d_get_odr());