Merge tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

07888238 · Linus Torvalds <[email protected]> · 2014-06-10 14:35:22 -07:00

Pull MMC update from Chris Ball:
 "MMC highlights for 3.16:

  Core:
   - support HS400 mode of eMMC 5.0, via DT bindings mmc-hs400-1_{2,8}v
   - if card init at 3.3v doesn't work, try 1.8v and 1.2v too

  Drivers:
   - moxart: New driver for MOXA ART SoCs
   - rtsx_usb_sdmmc: New driver for Realtek USB card readers
   - sdhci: Large rework around IRQ/regulator handling, remove card_tasklet
   - sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
   - sunxi: New driver for Allwinner sunxi SoCs
   - usdhi6rol0: New driver for Renesas SD/SDIO controller"

* tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (95 commits)
  mmc: sdhci-s3c: use mmc_of_parse and remove the card_tasklet
  mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller
  mmc: sdhci-of-esdhc: Fixup compile error
  mmc: tegra: fix reporting of base clock frequency
  mmc: tegra: disable UHS modes
  mmc: sdhci-dove: use mmc_of_parse() and remove card_tasklet CD handler
  MAINTAINERS: mmc: Add path to git tree
  mmc: dove: fix missing MACH_DOVE dependency
  mmc: sdhci: SD tuning is broken for some controllers
  mmc: sdhci-esdhc-imx: fix mmc ddr mode regression issue
  mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
  mmc: omap_hsmmc: split omap-dma header file
  mmc: omap_hsmmc: fix cmd23 multiblock read/write
  mmc: omap_hsmmc: use devm_ioremap_resource
  mmc: omap_hsmmc: use devm_request_threaded_irq
  mmc: omap_hsmmc: use devm_request_irq
  mmc: omap_hsmmc: use devm_clk_get
  mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs
  mmc: wmt-sdmmc: Use GFP_KERNEL instead of hard-coded value
  mmc: omap: Use DIV_ROUND_UP instead of open coded
  ...

Commit: 07888238f55056605cd23aa4ea3ca97d5e15938f
Parents: 23adbe12 · 11bc9381

Merge commit. Changes below are compared with the first parent: 23adbe12.

Changes

65 files changed · +4107 −1492

File	Status	Add	Del	Content
Documentation/devicetree/bindings/mmc/mmc.txt	modified	+2	−0	View file
Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt	added	+30	−0	View file
Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt	modified	+0	−5	View file
Documentation/devicetree/bindings/mmc/usdhi6rol0.txt	added	+33	−0	View file
MAINTAINERS	modified	+2	−1	View file
drivers/mmc/core/bus.c	modified	+5	−4	View file
drivers/mmc/core/core.c	modified	+36	−16	View file
drivers/mmc/core/debugfs.c	modified	+7	−1	View file
drivers/mmc/core/host.c	modified	+4	−0	View file
drivers/mmc/core/mmc.c	modified	+403	−275	View file
drivers/mmc/core/sd.c	modified	+5	−23	View file
drivers/mmc/core/sd.h	modified	+0	−1	View file
drivers/mmc/core/sdio.c	modified	+6	−47	View file
drivers/mmc/core/sdio_bus.c	modified	+1	−13	View file
drivers/mmc/core/sdio_irq.c	modified	+31	−10	View file
drivers/mmc/core/slot-gpio.c	modified	+1	−3	View file
drivers/mmc/host/Kconfig	modified	+16	−1	View file
drivers/mmc/host/Makefile	modified	+2	−0	View file
drivers/mmc/host/atmel-mci.c	modified	+3	−10	View file
drivers/mmc/host/dw_mmc-exynos.c	modified	+3	−4	View file
drivers/mmc/host/dw_mmc.c	modified	+24	−156	View file
drivers/mmc/host/dw_mmc.h	modified	+0	−2	View file
drivers/mmc/host/jz4740_mmc.c	modified	+7	−4	View file
drivers/mmc/host/mmci.c	modified	+4	−2	View file
drivers/mmc/host/moxart-mmc.c	added	+730	−0	View file
drivers/mmc/host/mvsdio.c	modified	+17	−3	View file
drivers/mmc/host/mxcmmc.c	modified	+49	−91	View file
drivers/mmc/host/mxs-mmc.c	modified	+7	−0	View file
drivers/mmc/host/omap.c	modified	+5	−5	View file
drivers/mmc/host/omap_hsmmc.c	modified	+20	−41	View file
drivers/mmc/host/rtsx_pci_sdmmc.c	modified	+5	−0	View file
drivers/mmc/host/rtsx_usb_sdmmc.c	modified	+3	−2	View file
drivers/mmc/host/sdhci-acpi.c	modified	+8	−0	View file
drivers/mmc/host/sdhci-bcm-kona.c	modified	+4	−0	View file
drivers/mmc/host/sdhci-bcm2835.c	modified	+4	−0	View file
drivers/mmc/host/sdhci-cns3xxx.c	modified	+6	−7	View file
drivers/mmc/host/sdhci-dove.c	modified	+9	−69	View file
drivers/mmc/host/sdhci-esdhc-imx.c	modified	+45	−38	View file
drivers/mmc/host/sdhci-esdhc.h	modified	+1	−3	View file
drivers/mmc/host/sdhci-of-arasan.c	modified	+4	−0	View file
drivers/mmc/host/sdhci-of-esdhc.c	modified	+43	−27	View file
drivers/mmc/host/sdhci-of-hlwd.c	modified	+4	−0	View file
drivers/mmc/host/sdhci-pci-o2micro.c	modified	+77	−1	View file
drivers/mmc/host/sdhci-pci-o2micro.h	modified	+3	−0	View file
drivers/mmc/host/sdhci-pci.c	modified	+5	−4	View file
drivers/mmc/host/sdhci-pltfm.c	modified	+4	−0	View file
drivers/mmc/host/sdhci-pxav2.c	modified	+8	−6	View file
drivers/mmc/host/sdhci-pxav3.c	modified	+8	−5	View file
drivers/mmc/host/sdhci-s3c.c	modified	+27	−111	View file
drivers/mmc/host/sdhci-sirf.c	modified	+4	−0	View file
drivers/mmc/host/sdhci-spear.c	modified	+4	−1	View file
drivers/mmc/host/sdhci-tegra.c	modified	+38	−29	View file
drivers/mmc/host/sdhci.c	modified	+368	−381	View file
drivers/mmc/host/sdhci.h	modified	+13	−7	View file
drivers/mmc/host/sh_mmcif.c	modified	+5	−4	View file
drivers/mmc/host/usdhi6rol0.c	added	+1847	−0	View file
drivers/mmc/host/wmt-sdmmc.c	modified	+1	−1	View file
drivers/net/wireless/rsi/rsi_91x_sdio.c	modified	+1	−3	View file
include/linux/mmc/card.h	modified	+10	−19	View file
include/linux/mmc/dw_mmc.h	modified	+0	−14	View file
include/linux/mmc/host.h	modified	+46	−13	View file
include/linux/mmc/mmc.h	modified	+18	−5	View file
include/linux/mmc/sdhci.h	modified	+9	−6	View file
include/linux/omap-dma.h	modified	+1	−18	View file
include/linux/omap-dmaengine.h	added	+21	−0	View file

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/devicetree/bindings/mmc/mmc.txt

View file

diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index 9dce540..3c18001 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -38,6 +38,8 @@ Optional properties:
 - mmc-highspeed-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported
 - mmc-hs200-1_8v: eMMC HS200 mode(1.8V I/O) is supported
 - mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported
+- mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported
+- mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported
 
 *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
 polarity properties, we have to fix the meaning of the "normal" and "inverted"

Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt

View file

diff --git a/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt b/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt
new file mode 100644
index 0000000..b638191
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt
@@ -0,0 +1,30 @@
+MOXA ART MMC Host Controller Interface
+
+  Inherits from mmc binding[1].
+
+  [1] Documentation/devicetree/bindings/mmc/mmc.txt
+
+Required properties:
+
+- compatible :	Must be "moxa,moxart-mmc" or "faraday,ftsdc010"
+- reg :		Should contain registers location and length
+- interrupts :	Should contain the interrupt number
+- clocks :	Should contain phandle for the clock feeding the MMC controller
+
+Optional properties:
+
+- dmas :	Should contain two DMA channels, line request number must be 5 for
+		both channels
+- dma-names :	Must be "tx", "rx"
+
+Example:
+
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
+		reg = <0x98e00000 0x5C>;
+		interrupts = <5 0>;
+		clocks = <&clk_apb>;
+		dmas =  <&dma 5>,
+			<&dma 5>;
+		dma-names = "tx", "rx";
+	};

Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt

View file

diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
index 8f3f133..2d4a725 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
@@ -69,10 +69,6 @@ Optional properties:
 
 * supports-highspeed: Enables support for high speed cards (up to 50MHz)
 
-* caps2-mmc-hs200-1_8v: Supports mmc HS200 SDR 1.8V mode
-
-* caps2-mmc-hs200-1_2v: Supports mmc HS200 SDR 1.2V mode
-
 * broken-cd: as documented in mmc core bindings.
 
 * vmmc-supply: The phandle to the regulator to use for vmmc.  If this is
@@ -103,7 +99,6 @@ board specific portions as listed below.
 		clock-freq-min-max = <400000 200000000>;
 		num-slots = <1>;
 		supports-highspeed;
-		caps2-mmc-hs200-1_8v;
 		broken-cd;
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;

Documentation/devicetree/bindings/mmc/usdhi6rol0.txt

View file

diff --git a/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt b/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt
new file mode 100644
index 0000000..8babdaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt
@@ -0,0 +1,33 @@
+* Renesas usdhi6rol0 SD/SDIO host controller
+
+Required properties:
+
+- compatible:	must be
+		"renesas,usdhi6rol0"
+- interrupts:	3 interrupts, named "card detect", "data" and "SDIO" must be
+		specified
+- clocks:	a clock binding for the IMCLK input
+
+Optional properties:
+
+- vmmc-supply:	a phandle of a regulator, supplying Vcc to the card
+- vqmmc-supply:	a phandle of a regulator, supplying VccQ to the card
+
+Additionally any standard mmc bindings from mmc.txt can be used.
+
+Example:
+
+sd0: sd@ab000000 {
+	compatible = "renesas,usdhi6rol0";
+	reg = <0xab000000 0x200>;
+	interrupts = <0 23 0x4
+		      0 24 0x4
+		      0 25 0x4>;
+	interrupt-names = "card detect", "data", "SDIO";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-power-off-card;
+	clocks = <&imclk>;
+	vmmc-supply = <&vcc_sd0>;
+	vqmmc-supply = <&vccq_sd0>;
+};

MAINTAINERS

View file

diff --git a/MAINTAINERS b/MAINTAINERS
index 9483795..b4a66b9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5974,6 +5974,7 @@ M:	Chris Ball <[email protected]>
 M:	Ulf Hansson <[email protected]>
 L:	[email protected]
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
+T:	git git://git.linaro.org/people/ulf.hansson/mmc.git
 S:	Maintained
 F:	drivers/mmc/
 F:	include/linux/mmc/
@@ -9103,7 +9104,7 @@ F:	include/linux/toshiba.h
 F:	include/uapi/linux/toshiba.h
 
 TMIO MMC DRIVER
-M:	Ian Molton <[email protected]>
+M:	Ian Molton <[email protected]>
 L:	[email protected]
 S:	Maintained
 F:	drivers/mmc/host/tmio_mmc*

drivers/mmc/core/bus.c

View file

diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 8246448..d2dbf02 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -341,16 +341,17 @@ int mmc_add_card(struct mmc_card *card)
 	if (mmc_host_is_spi(card->host)) {
 		pr_info("%s: new %s%s%s card on SPI\n",
 			mmc_hostname(card->host),
-			mmc_card_highspeed(card) ? "high speed " : "",
-			mmc_card_ddr_mode(card) ? "DDR " : "",
+			mmc_card_hs(card) ? "high speed " : "",
+			mmc_card_ddr52(card) ? "DDR " : "",
 			type);
 	} else {
 		pr_info("%s: new %s%s%s%s%s card at address %04x\n",
 			mmc_hostname(card->host),
 			mmc_card_uhs(card) ? "ultra high speed " :
-			(mmc_card_highspeed(card) ? "high speed " : ""),
+			(mmc_card_hs(card) ? "high speed " : ""),
+			mmc_card_hs400(card) ? "HS400 " :
 			(mmc_card_hs200(card) ? "HS200 " : ""),
-			mmc_card_ddr_mode(card) ? "DDR " : "",
+			mmc_card_ddr52(card) ? "DDR " : "",
 			uhs_bus_speed_mode, type, card->rca);
 	}
 

drivers/mmc/core/core.c

View file

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index acbc3f2..7dc0c85 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -800,6 +800,10 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
 			data->timeout_ns = limit_us * 1000;
 			data->timeout_clks = 0;
 		}
+
+		/* assign limit value if invalid */
+		if (timeout_us == 0)
+			data->timeout_ns = limit_us * 1000;
 	}
 
 	/*
@@ -1310,31 +1314,38 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc,
 }
 EXPORT_SYMBOL_GPL(mmc_regulator_set_ocr);
 
+#endif /* CONFIG_REGULATOR */
+
 int mmc_regulator_get_supply(struct mmc_host *mmc)
 {
 	struct device *dev = mmc_dev(mmc);
-	struct regulator *supply;
 	int ret;
 
-	supply = devm_regulator_get(dev, "vmmc");
-	mmc->supply.vmmc = supply;
+	mmc->supply.vmmc = devm_regulator_get_optional(dev, "vmmc");
 	mmc->supply.vqmmc = devm_regulator_get_optional(dev, "vqmmc");
 
-	if (IS_ERR(supply))
-		return PTR_ERR(supply);
+	if (IS_ERR(mmc->supply.vmmc)) {
+		if (PTR_ERR(mmc->supply.vmmc) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_info(dev, "No vmmc regulator found\n");
+	} else {
+		ret = mmc_regulator_get_ocrmask(mmc->supply.vmmc);
+		if (ret > 0)
+			mmc->ocr_avail = ret;
+		else
+			dev_warn(dev, "Failed getting OCR mask: %d\n", ret);
+	}
 
-	ret = mmc_regulator_get_ocrmask(supply);
-	if (ret > 0)
-		mmc->ocr_avail = ret;
-	else
-		dev_warn(mmc_dev(mmc), "Failed getting OCR mask: %d\n", ret);
+	if (IS_ERR(mmc->supply.vqmmc)) {
+		if (PTR_ERR(mmc->supply.vqmmc) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_info(dev, "No vqmmc regulator found\n");
+	}
 
 	return 0;
 }
 EXPORT_SYMBOL_GPL(mmc_regulator_get_supply);
 
-#endif /* CONFIG_REGULATOR */
-
 /*
  * Mask off any voltages we don't support and select
  * the lowest voltage
@@ -1533,8 +1544,13 @@ void mmc_power_up(struct mmc_host *host, u32 ocr)
 	host->ios.timing = MMC_TIMING_LEGACY;
 	mmc_set_ios(host);
 
-	/* Set signal voltage to 3.3V */
-	__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330);
+	/* Try to set signal voltage to 3.3V but fall back to 1.8v or 1.2v */
+	if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330) == 0)
+		dev_dbg(mmc_dev(host), "Initial signal voltage of 3.3v\n");
+	else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180) == 0)
+		dev_dbg(mmc_dev(host), "Initial signal voltage of 1.8v\n");
+	else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120) == 0)
+		dev_dbg(mmc_dev(host), "Initial signal voltage of 1.2v\n");
 
 	/*
 	 * This delay should be sufficient to allow the power supply
@@ -2183,7 +2199,7 @@ int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen)
 {
 	struct mmc_command cmd = {0};
 
-	if (mmc_card_blockaddr(card) || mmc_card_ddr_mode(card))
+	if (mmc_card_blockaddr(card) || mmc_card_ddr52(card))
 		return 0;
 
 	cmd.opcode = MMC_SET_BLOCKLEN;
@@ -2263,7 +2279,6 @@ static int mmc_do_hw_reset(struct mmc_host *host, int check)
 		}
 	}
 
-	host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_DDR);
 	if (mmc_host_is_spi(host)) {
 		host->ios.chip_select = MMC_CS_HIGH;
 		host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
@@ -2403,6 +2418,11 @@ void mmc_rescan(struct work_struct *work)
 		container_of(work, struct mmc_host, detect.work);
 	int i;
 
+	if (host->trigger_card_event && host->ops->card_event) {
+		host->ops->card_event(host);
+		host->trigger_card_event = false;
+	}
+
 	if (host->rescan_disable)
 		return;
 

drivers/mmc/core/debugfs.c

View file

diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c
index 54829c0..91eb162 100644
--- a/drivers/mmc/core/debugfs.c
+++ b/drivers/mmc/core/debugfs.c
@@ -135,8 +135,14 @@ static int mmc_ios_show(struct seq_file *s, void *data)
 	case MMC_TIMING_UHS_DDR50:
 		str = "sd uhs DDR50";
 		break;
+	case MMC_TIMING_MMC_DDR52:
+		str = "mmc DDR52";
+		break;
 	case MMC_TIMING_MMC_HS200:
-		str = "mmc high-speed SDR200";
+		str = "mmc HS200";
+		break;
+	case MMC_TIMING_MMC_HS400:
+		str = "mmc HS400";
 		break;
 	default:
 		str = "invalid";

drivers/mmc/core/host.c

View file

diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index fdea825..95cceae 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -447,6 +447,10 @@ int mmc_of_parse(struct mmc_host *host)
 		host->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
 	if (of_find_property(np, "mmc-hs200-1_2v", &len))
 		host->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
+	if (of_find_property(np, "mmc-hs400-1_8v", &len))
+		host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR;
+	if (of_find_property(np, "mmc-hs400-1_2v", &len))
+		host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR;
 
 	return 0;
 

drivers/mmc/core/mmc.c

View file

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 1ab5f3a..793c6f7 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -240,31 +240,62 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
 static void mmc_select_card_type(struct mmc_card *card)
 {
 	struct mmc_host *host = card->host;
-	u8 card_type = card->ext_csd.raw_card_type & EXT_CSD_CARD_TYPE_MASK;
+	u8 card_type = card->ext_csd.raw_card_type;
 	u32 caps = host->caps, caps2 = host->caps2;
-	unsigned int hs_max_dtr = 0;
+	unsigned int hs_max_dtr = 0, hs200_max_dtr = 0;
+	unsigned int avail_type = 0;
 
-	if (card_type & EXT_CSD_CARD_TYPE_26)
+	if (caps & MMC_CAP_MMC_HIGHSPEED &&
+	    card_type & EXT_CSD_CARD_TYPE_HS_26) {
 		hs_max_dtr = MMC_HIGH_26_MAX_DTR;
+		avail_type |= EXT_CSD_CARD_TYPE_HS_26;
+	}
 
 	if (caps & MMC_CAP_MMC_HIGHSPEED &&
-			card_type & EXT_CSD_CARD_TYPE_52)
+	    card_type & EXT_CSD_CARD_TYPE_HS_52) {
 		hs_max_dtr = MMC_HIGH_52_MAX_DTR;
+		avail_type |= EXT_CSD_CARD_TYPE_HS_52;
+	}
+
+	if (caps & MMC_CAP_1_8V_DDR &&
+	    card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) {
+		hs_max_dtr = MMC_HIGH_DDR_MAX_DTR;
+		avail_type |= EXT_CSD_CARD_TYPE_DDR_1_8V;
+	}
 
-	if ((caps & MMC_CAP_1_8V_DDR &&
-			card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) ||
-	    (caps & MMC_CAP_1_2V_DDR &&
-			card_type & EXT_CSD_CARD_TYPE_DDR_1_2V))
+	if (caps & MMC_CAP_1_2V_DDR &&
+	    card_type & EXT_CSD_CARD_TYPE_DDR_1_2V) {
 		hs_max_dtr = MMC_HIGH_DDR_MAX_DTR;
+		avail_type |= EXT_CSD_CARD_TYPE_DDR_1_2V;
+	}
+
+	if (caps2 & MMC_CAP2_HS200_1_8V_SDR &&
+	    card_type & EXT_CSD_CARD_TYPE_HS200_1_8V) {
+		hs200_max_dtr = MMC_HS200_MAX_DTR;
+		avail_type |= EXT_CSD_CARD_TYPE_HS200_1_8V;
+	}
+
+	if (caps2 & MMC_CAP2_HS200_1_2V_SDR &&
+	    card_type & EXT_CSD_CARD_TYPE_HS200_1_2V) {
+		hs200_max_dtr = MMC_HS200_MAX_DTR;
+		avail_type |= EXT_CSD_CARD_TYPE_HS200_1_2V;
+	}
+
+	if (caps2 & MMC_CAP2_HS400_1_8V &&
+	    card_type & EXT_CSD_CARD_TYPE_HS400_1_8V) {
+		hs200_max_dtr = MMC_HS200_MAX_DTR;
+		avail_type |= EXT_CSD_CARD_TYPE_HS400_1_8V;
+	}
 
-	if ((caps2 & MMC_CAP2_HS200_1_8V_SDR &&
-			card_type & EXT_CSD_CARD_TYPE_SDR_1_8V) ||
-	    (caps2 & MMC_CAP2_HS200_1_2V_SDR &&
-			card_type & EXT_CSD_CARD_TYPE_SDR_1_2V))
-		hs_max_dtr = MMC_HS200_MAX_DTR;
+	if (caps2 & MMC_CAP2_HS400_1_2V &&
+	    card_type & EXT_CSD_CARD_TYPE_HS400_1_2V) {
+		hs200_max_dtr = MMC_HS200_MAX_DTR;
+		avail_type |= EXT_CSD_CARD_TYPE_HS400_1_2V;
+	}
 
 	card->ext_csd.hs_max_dtr = hs_max_dtr;
-	card->ext_csd.card_type = card_type;
+	card->ext_csd.hs200_max_dtr = hs200_max_dtr;
+	card->mmc_avail_type = avail_type;
 }
 
 /*
@@ -480,6 +511,8 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 			ext_csd[EXT_CSD_PWR_CL_DDR_52_195];
 		card->ext_csd.raw_pwr_cl_ddr_52_360 =
 			ext_csd[EXT_CSD_PWR_CL_DDR_52_360];
+		card->ext_csd.raw_pwr_cl_ddr_200_360 =
+			ext_csd[EXT_CSD_PWR_CL_DDR_200_360];
 	}
 
 	if (card->ext_csd.rev >= 5) {
@@ -646,7 +679,10 @@ static int mmc_compare_ext_csds(struct mmc_card *card, unsigned bus_width)
 		(card->ext_csd.raw_pwr_cl_ddr_52_195 ==
 			bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_195]) &&
 		(card->ext_csd.raw_pwr_cl_ddr_52_360 ==
-			bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_360]));
+			bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_360]) &&
+		(card->ext_csd.raw_pwr_cl_ddr_200_360 ==
+			bw_ext_csd[EXT_CSD_PWR_CL_DDR_200_360]));
+
 	if (err)
 		err = -EINVAL;
 
@@ -694,18 +730,10 @@ static struct attribute *mmc_std_attrs[] = {
 	&dev_attr_rel_sectors.attr,
 	NULL,
 };
-
-static struct attribute_group mmc_std_attr_group = {
-	.attrs = mmc_std_attrs,
-};
-
-static const struct attribute_group *mmc_attr_groups[] = {
-	&mmc_std_attr_group,
-	NULL,
-};
+ATTRIBUTE_GROUPS(mmc_std);
 
 static struct device_type mmc_type = {
-	.groups = mmc_attr_groups,
+	.groups = mmc_std_groups,
 };
 
 /*
@@ -714,17 +742,13 @@ static struct device_type mmc_type = {
  * extended CSD register, select it by executing the
  * mmc_switch command.
  */
-static int mmc_select_powerclass(struct mmc_card *card,
-		unsigned int bus_width)
+static int __mmc_select_powerclass(struct mmc_card *card,
+				   unsigned int bus_width)
 {
-	int err = 0;
+	struct mmc_host *host = card->host;
+	struct mmc_ext_csd *ext_csd = &card->ext_csd;
 	unsigned int pwrclass_val = 0;
-	struct mmc_host *host;
-
-	BUG_ON(!card);
-
-	host = card->host;
-	BUG_ON(!host);
+	int err = 0;
 
 	/* Power class selection is supported for versions >= 4.0 */
 	if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
@@ -736,14 +760,14 @@ static int mmc_select_powerclass(struct mmc_card *card,
 
 	switch (1 << host->ios.vdd) {
 	case MMC_VDD_165_195:
-		if (host->ios.clock <= 26000000)
-			pwrclass_val = card->ext_csd.raw_pwr_cl_26_195;
-		else if	(host->ios.clock <= 52000000)
+		if (host->ios.clock <= MMC_HIGH_26_MAX_DTR)
+			pwrclass_val = ext_csd->raw_pwr_cl_26_195;
+		else if (host->ios.clock <= MMC_HIGH_52_MAX_DTR)
 			pwrclass_val = (bus_width <= EXT_CSD_BUS_WIDTH_8) ?
-				card->ext_csd.raw_pwr_cl_52_195 :
-				card->ext_csd.raw_pwr_cl_ddr_52_195;
-		else if (host->ios.clock <= 200000000)
-			pwrclass_val = card->ext_csd.raw_pwr_cl_200_195;
+				ext_csd->raw_pwr_cl_52_195 :
+				ext_csd->raw_pwr_cl_ddr_52_195;
+		else if (host->ios.clock <= MMC_HS200_MAX_DTR)
+			pwrclass_val = ext_csd->raw_pwr_cl_200_195;
 		break;
 	case MMC_VDD_27_28:
 	case MMC_VDD_28_29:
@@ -754,14 +778,16 @@ static int mmc_select_powerclass(struct mmc_card *card,
 	case MMC_VDD_33_34:
 	case MMC_VDD_34_35:
 	case MMC_VDD_35_36:
-		if (host->ios.clock <= 26000000)
-			pwrclass_val = card->ext_csd.raw_pwr_cl_26_360;
-		else if	(host->ios.clock <= 52000000)
+		if (host->ios.clock <= MMC_HIGH_26_MAX_DTR)
+			pwrclass_val = ext_csd->raw_pwr_cl_26_360;
+		else if (host->ios.clock <= MMC_HIGH_52_MAX_DTR)
 			pwrclass_val = (bus_width <= EXT_CSD_BUS_WIDTH_8) ?
-				card->ext_csd.raw_pwr_cl_52_360 :
-				card->ext_csd.raw_pwr_cl_ddr_52_360;
-		else if (host->ios.clock <= 200000000)
-			pwrclass_val = card->ext_csd.raw_pwr_cl_200_360;
+				ext_csd->raw_pwr_cl_52_360 :
+				ext_csd->raw_pwr_cl_ddr_52_360;
+		else if (host->ios.clock <= MMC_HS200_MAX_DTR)
+			pwrclass_val = (bus_width == EXT_CSD_DDR_BUS_WIDTH_8) ?
+				ext_csd->raw_pwr_cl_ddr_200_360 :
+				ext_csd->raw_pwr_cl_200_360;
 		break;
 	default:
 		pr_warning("%s: Voltage range not supported "
@@ -787,40 +813,79 @@ static int mmc_select_powerclass(struct mmc_card *card,
 	return err;
 }
 
+static int mmc_select_powerclass(struct mmc_card *card)
+{
+	struct mmc_host *host = card->host;
+	u32 bus_width, ext_csd_bits;
+	int err, ddr;
+
+	/* Power class selection is supported for versions >= 4.0 */
+	if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
+		return 0;
+
+	bus_width = host->ios.bus_width;
+	/* Power class values are defined only for 4/8 bit bus */
+	if (bus_width == MMC_BUS_WIDTH_1)
+		return 0;
+
+	ddr = card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_52;
+	if (ddr)
+		ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ?
+			EXT_CSD_DDR_BUS_WIDTH_8 : EXT_CSD_DDR_BUS_WIDTH_4;
+	else
+		ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ?
+			EXT_CSD_BUS_WIDTH_8 :  EXT_CSD_BUS_WIDTH_4;
+
+	err = __mmc_select_powerclass(card, ext_csd_bits);
+	if (err)
+		pr_warn("%s: power class selection to bus width %d ddr %d failed\n",
+			mmc_hostname(host), 1 << bus_width, ddr);
+
+	return err;
+}
+
 /*
- * Selects the desired buswidth and switch to the HS200 mode
- * if bus width set without error
+ * Set the bus speed for the selected speed mode.
  */
-static int mmc_select_hs200(struct mmc_card *card)
+static void mmc_set_bus_speed(struct mmc_card *card)
+{
+	unsigned int max_dtr = (unsigned int)-1;
+
+	if ((mmc_card_hs200(card) || mmc_card_hs400(card)) &&
+	     max_dtr > card->ext_csd.hs200_max_dtr)
+		max_dtr = card->ext_csd.hs200_max_dtr;
+	else if (mmc_card_hs(card) && max_dtr > card->ext_csd.hs_max_dtr)
+		max_dtr = card->ext_csd.hs_max_dtr;
+	else if (max_dtr > card->csd.max_dtr)
+		max_dtr = card->csd.max_dtr;
+
+	mmc_set_clock(card->host, max_dtr);
+}
+
+/*
+ * Select the bus width amoung 4-bit and 8-bit(SDR).
+ * If the bus width is changed successfully, return the selected width value.
+ * Zero is returned instead of error value if the wide width is not supported.
+ */
+static int mmc_select_bus_width(struct mmc_card *card)
 {
-	int idx, err = -EINVAL;
-	struct mmc_host *host;
 	static unsigned ext_csd_bits[] = {
-		EXT_CSD_BUS_WIDTH_4,
 		EXT_CSD_BUS_WIDTH_8,
+		EXT_CSD_BUS_WIDTH_4,
 	};
 	static unsigned bus_widths[] = {
-		MMC_BUS_WIDTH_4,
 		MMC_BUS_WIDTH_8,
+		MMC_BUS_WIDTH_4,
 	};
+	struct mmc_host *host = card->host;
+	unsigned idx, bus_width = 0;
+	int err = 0;
 
-	BUG_ON(!card);
-
-	host = card->host;
-
-	if (card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V &&
-			host->caps2 & MMC_CAP2_HS200_1_2V_SDR)
-		err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
-
-	if (err && card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_8V &&
-			host->caps2 & MMC_CAP2_HS200_1_8V_SDR)
-		err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
-
-	/* If fails try again during next card power cycle */
-	if (err)
-		goto err;
+	if ((card->csd.mmca_vsn < CSD_SPEC_VER_4) &&
+	    !(host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)))
+		return 0;
 
-	idx = (host->caps & MMC_CAP_8_BIT_DATA) ? 1 : 0;
+	idx = (host->caps & MMC_CAP_8_BIT_DATA) ? 0 : 1;
 
 	/*
 	 * Unlike SD, MMC cards dont have a configuration register to notify
@@ -828,8 +893,7 @@ static int mmc_select_hs200(struct mmc_card *card)