Merge tag 'rtc-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

13f6f62f · Linus Torvalds <[email protected]> · 2016-03-15 21:58:58 -07:00

Pull RTC updates from Alexandre Belloni:
 "Core:
   - New sysfs interface to set and read clock offset
   - Drivers can now be both I2C and SPI (see pcf2127 and ds3232)

  New drivers:
   - Alphascale ASM9260
   - Epson RX6110SA
   - Maxim max20024 and max77620 (in max77686)
   - Microchip PIC32
   - NXP pcf2129 (in pcf2127)

  Subsystem wide cleanups:
   - remove IRQF_EARLY_RESUME when unecessary

  Drivers:
   - ds1307: clock output, temperature sensor and wakeup-source support
   - ds1685: actually spin forever in poweroff error path
   - ds3232: many cleanups
   - ds3234: merged in ds3232
   - hym8563: fix invalid year calculation
   - max77686: many cleanups
   - max77802 merged in max77686
   - pcf2123: cleanups and offset support
   - pcf85063: cleanups
   - pcf8523: propely handle oscillator stop bit
   - rv3029: many cleanups, trickle charger and temperature sensor support
   - rv8803: convert spin_lock to mutex_lock
   - rx8025: many fixes
   - vr41xx: restore alarm_irq_enable"

* tag 'rtc-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (86 commits)
  rtc: pcf2127: add pcf2129 device id
  rtc: pcf2127: add support for spi interface
  rtc: pcf2127: convert to use regmap
  rtc: rv3029: Add thermometer hwmon support
  rtc: rv3029: Add update_bits helper for eeprom access
  rtc: ds1685: actually spin forever in poweroff error path
  rtc: hym8563: fix invalid year calculation
  rtc: ds3232: use rtc->ops_lock to protect alarm operations
  rtc: ds3232: fix issue when irq is shared several devices
  rtc: ds3232: remove unused UIE code
  rtc: ds3232: add register access error checks
  rtc: ds3232: fix read on /dev/rtc after RTC_AIE_ON
  rtc: merge ds3232 and ds3234
  rtc: ds3232: convert to use regmap
  rtc: pxa: fix Kconfig indentation
  rtc: rv3029: Add device tree property for trickle charger
  rtc: rv3029: Add functions for EEPROM access
  rtc: rv3029: Add i2c register update-bits helper
  rtc: rv3029: Add missing register definitions
  rtc: rv3029: Add "rv3029" I2C device id
  ...

Commit: 13f6f62f61b4d3d5f45bed889128bb7ff3fda5ed
Parents: f0718cea · cee2cc21

Merge commit. Changes below are compared with the first parent: f0718cea.

Changes

40 files changed · +3854 −1653

File	Status	Add	Del	Content
Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.txt	added	+19	−0	View file
Documentation/devicetree/bindings/rtc/epson,rx6110.txt	added	+39	−0	View file
Documentation/devicetree/bindings/rtc/maxim,ds3231.txt	added	+37	−0	View file
Documentation/devicetree/bindings/rtc/microchip,pic32-rtc.txt	added	+21	−0	View file
Documentation/rtc.txt	modified	+6	−0	View file
drivers/mfd/max77686.c	modified	+3	−83	View file
drivers/rtc/Kconfig	modified	+148	−104	View file
drivers/rtc/Makefile	modified	+3	−2	View file
drivers/rtc/class.c	modified	+0	−13	View file
drivers/rtc/interface.c	modified	+54	−0	View file
drivers/rtc/rtc-as3722.c	modified	+1	−1	View file
drivers/rtc/rtc-asm9260.c	added	+355	−0	View file
drivers/rtc/rtc-ds1305.c	modified	+2	−2	View file
drivers/rtc/rtc-ds1307.c	modified	+409	−2	View file
drivers/rtc/rtc-ds1685.c	modified	+5	−4	View file
drivers/rtc/rtc-ds3232.c	modified	+283	−193	View file
drivers/rtc/rtc-ds3234.c	deleted	+0	−171	View before deletion
drivers/rtc/rtc-generic.c	modified	+11	−1	View file
drivers/rtc/rtc-hym8563.c	modified	+1	−1	View file
drivers/rtc/rtc-max77686.c	modified	+450	−115	View file
drivers/rtc/rtc-max77802.c	deleted	+0	−502	View before deletion
drivers/rtc/rtc-mt6397.c	modified	+0	−1	View file
drivers/rtc/rtc-palmas.c	modified	+1	−2	View file
drivers/rtc/rtc-pcf2123.c	modified	+194	−77	View file
drivers/rtc/rtc-pcf2127.c	modified	+263	−72	View file
drivers/rtc/rtc-pcf85063.c	modified	+86	−76	View file
drivers/rtc/rtc-pcf8523.c	modified	+3	−22	View file
drivers/rtc/rtc-pic32.c	added	+411	−0	View file
drivers/rtc/rtc-rv3029c2.c	modified	+556	−167	View file
drivers/rtc/rtc-rv8803.c	modified	+18	−21	View file
drivers/rtc/rtc-rx6110.c	added	+402	−0	View file
drivers/rtc/rtc-rx8025.c	modified	+21	−4	View file
drivers/rtc/rtc-s5m.c	modified	+4	−4	View file
drivers/rtc/rtc-sysfs.c	modified	+34	−1	View file
drivers/rtc/rtc-tps6586x.c	modified	+1	−1	View file
drivers/rtc/rtc-tps65910.c	modified	+1	−1	View file
drivers/rtc/rtc-tps80031.c	modified	+1	−1	View file
drivers/rtc/rtc-vr41xx.c	modified	+7	−6	View file
include/linux/mfd/max77686-private.h	modified	+0	−3	View file
include/linux/rtc.h	modified	+4	−0	View file

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.txt

View file

diff --git a/Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.txt b/Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.txt
new file mode 100644
index 0000000..76ebca5
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.txt
@@ -0,0 +1,19 @@
+* Alphascale asm9260 SoC Real Time Clock
+
+Required properties:
+- compatible: Should be "alphascale,asm9260-rtc"
+- reg: Physical base address of the controller and length
+       of memory mapped region.
+- interrupts: IRQ line for the RTC.
+- clocks: Reference to the clock entry.
+- clock-names: should contain:
+  * "ahb" for the SoC RTC clock
+
+Example:
+rtc0: rtc@800a0000 {
+	compatible = "alphascale,asm9260-rtc";
+	reg = <0x800a0000 0x100>;
+	clocks = <&acc CLKID_AHB_RTC>;
+	clock-names = "ahb";
+	interrupts = <2>;
+};

Documentation/devicetree/bindings/rtc/epson,rx6110.txt

View file

diff --git a/Documentation/devicetree/bindings/rtc/epson,rx6110.txt b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt
new file mode 100644
index 0000000..3dc313e
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt
@@ -0,0 +1,39 @@
+Epson RX6110 Real Time Clock
+============================
+
+The Epson RX6110 can be used with SPI or I2C busses. The kind of
+bus depends on the SPISEL pin and can not be configured via software.
+
+I2C mode
+--------
+
+Required properties:
+  - compatible: should be: "epson,rx6110"
+  - reg : the I2C address of the device for I2C
+
+Example:
+
+	rtc: rtc@32 {
+		compatible = "epson,rx6110"
+		reg = <0x32>;
+	};
+
+SPI mode
+--------
+
+Required properties:
+  - compatible: should be: "epson,rx6110"
+  - reg: chip select number
+  - spi-cs-high: RX6110 needs chipselect high
+  - spi-cpha: RX6110 works with SPI shifted clock phase
+  - spi-cpol: RX6110 works with SPI inverse clock polarity
+
+Example:
+
+	rtc: rtc@3 {
+		compatible = "epson,rx6110"
+		reg = <3>
+		spi-cs-high;
+		spi-cpha;
+		spi-cpol;
+	};

Documentation/devicetree/bindings/rtc/maxim,ds3231.txt

View file

diff --git a/Documentation/devicetree/bindings/rtc/maxim,ds3231.txt b/Documentation/devicetree/bindings/rtc/maxim,ds3231.txt
new file mode 100644
index 0000000..ddef330
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/maxim,ds3231.txt
@@ -0,0 +1,37 @@
+* Maxim DS3231 Real Time Clock
+
+Required properties:
+see: Documentation/devicetree/bindings/i2c/trivial-devices.txt
+
+Optional property:
+- #clock-cells: Should be 1.
+- clock-output-names:
+  overwrite the default clock names "ds3231_clk_sqw" and "ds3231_clk_32khz".
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Following indices are allowed:
+    - 0: square-wave output on the SQW pin
+    - 1: square-wave output on the 32kHz pin
+
+- interrupts: rtc alarm/event interrupt. When this property is selected,
+  clock on the SQW pin cannot be used.
+
+Example:
+
+ds3231: ds3231@51 {
+	compatible = "maxim,ds3231";
+	reg = <0x68>;
+	#clock-cells = <1>;
+};
+
+device1 {
+...
+	clocks = <&ds3231 0>;
+...
+};
+
+device2 {
+...
+	clocks = <&ds3231 1>;
+...
+};

Documentation/devicetree/bindings/rtc/microchip,pic32-rtc.txt

View file

diff --git a/Documentation/devicetree/bindings/rtc/microchip,pic32-rtc.txt b/Documentation/devicetree/bindings/rtc/microchip,pic32-rtc.txt
new file mode 100644
index 0000000..180b714
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/microchip,pic32-rtc.txt
@@ -0,0 +1,21 @@
+* Microchip PIC32 Real Time Clock and Calendar
+
+The RTCC keeps time in hours, minutes, and seconds, and one half second. It
+provides a calendar in weekday, date, month, and year. It also provides a
+configurable alarm.
+
+Required properties:
+- compatible: should be: "microchip,pic32mzda-rtc"
+- reg: physical base address of the controller and length of memory mapped
+    region.
+- interrupts: RTC alarm/event interrupt
+- clocks: clock phandle
+
+Example:
+
+	rtc: rtc@1f8c0000 {
+		compatible = "microchip,pic32mzda-rtc";
+		reg = <0x1f8c0000 0x60>;
+		interrupts = <166 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&PBCLK6>;
+	};

Documentation/rtc.txt

View file

diff --git a/Documentation/rtc.txt b/Documentation/rtc.txt
index 8446f1e..ddc3660 100644
--- a/Documentation/rtc.txt
+++ b/Documentation/rtc.txt
@@ -157,6 +157,12 @@ wakealarm:	 The time at which the clock will generate a system wakeup
 		 the epoch by default, or if there's a leading +, seconds in the
 		 future, or if there is a leading +=, seconds ahead of the current
 		 alarm.
+offset:		 The amount which the rtc clock has been adjusted in firmware.
+		 Visible only if the driver supports clock offset adjustment.
+		 The unit is parts per billion, i.e. The number of clock ticks
+		 which are added to or removed from the rtc's base clock per
+		 billion ticks. A positive value makes a day pass more slowly,
+		 longer, and a negative value makes a day pass more quickly.
 
 IOCTL INTERFACE
 ---------------

drivers/mfd/max77686.c

View file

diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c
index d959ebb..98ecd13 100644
--- a/drivers/mfd/max77686.c
+++ b/drivers/mfd/max77686.c
@@ -35,8 +35,6 @@
 #include <linux/err.h>
 #include <linux/of.h>
 
-#define I2C_ADDR_RTC	(0x0C >> 1)
-
 static const struct mfd_cell max77686_devs[] = {
 	{ .name = "max77686-pmic", },
 	{ .name = "max77686-rtc", },
@@ -116,11 +114,6 @@ static const struct regmap_config max77686_regmap_config = {
 	.val_bits = 8,
 };
 
-static const struct regmap_config max77686_rtc_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-};
-
 static const struct regmap_config max77802_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -156,25 +149,6 @@ static const struct regmap_irq_chip max77686_irq_chip = {
 	.num_irqs		= ARRAY_SIZE(max77686_irqs),
 };
 
-static const struct regmap_irq max77686_rtc_irqs[] = {
-	/* RTC interrupts */
-	{ .reg_offset = 0, .mask = MAX77686_RTCINT_RTC60S_MSK, },
-	{ .reg_offset = 0, .mask = MAX77686_RTCINT_RTCA1_MSK, },
-	{ .reg_offset = 0, .mask = MAX77686_RTCINT_RTCA2_MSK, },
-	{ .reg_offset = 0, .mask = MAX77686_RTCINT_SMPL_MSK, },
-	{ .reg_offset = 0, .mask = MAX77686_RTCINT_RTC1S_MSK, },
-	{ .reg_offset = 0, .mask = MAX77686_RTCINT_WTSR_MSK, },
-};
-
-static const struct regmap_irq_chip max77686_rtc_irq_chip = {
-	.name			= "max77686-rtc",
-	.status_base		= MAX77686_RTC_INT,
-	.mask_base		= MAX77686_RTC_INTM,
-	.num_regs		= 1,
-	.irqs			= max77686_rtc_irqs,
-	.num_irqs		= ARRAY_SIZE(max77686_rtc_irqs),
-};
-
 static const struct regmap_irq_chip max77802_irq_chip = {
 	.name			= "max77802-pmic",
 	.status_base		= MAX77802_REG_INT1,
@@ -184,15 +158,6 @@ static const struct regmap_irq_chip max77802_irq_chip = {
 	.num_irqs		= ARRAY_SIZE(max77686_irqs),
 };
 
-static const struct regmap_irq_chip max77802_rtc_irq_chip = {
-	.name			= "max77802-rtc",
-	.status_base		= MAX77802_RTC_INT,
-	.mask_base		= MAX77802_RTC_INTM,
-	.num_regs		= 1,
-	.irqs			= max77686_rtc_irqs, /* same masks as 77686 */
-	.num_irqs		= ARRAY_SIZE(max77686_rtc_irqs),
-};
-
 static const struct of_device_id max77686_pmic_dt_match[] = {
 	{
 		.compatible = "maxim,max77686",
@@ -214,8 +179,6 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
 	int ret = 0;
 	const struct regmap_config *config;
 	const struct regmap_irq_chip *irq_chip;
-	const struct regmap_irq_chip *rtc_irq_chip;
-	struct regmap **rtc_regmap;
 	const struct mfd_cell *cells;
 	int n_devs;
 
@@ -242,15 +205,11 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
 	if (max77686->type == TYPE_MAX77686) {
 		config = &max77686_regmap_config;
 		irq_chip = &max77686_irq_chip;
-		rtc_irq_chip = &max77686_rtc_irq_chip;
-		rtc_regmap = &max77686->rtc_regmap;
 		cells =  max77686_devs;
 		n_devs = ARRAY_SIZE(max77686_devs);
 	} else {
 		config = &max77802_regmap_config;
 		irq_chip = &max77802_irq_chip;
-		rtc_irq_chip = &max77802_rtc_irq_chip;
-		rtc_regmap = &max77686->regmap;
 		cells =  max77802_devs;
 		n_devs = ARRAY_SIZE(max77802_devs);
 	}
@@ -270,60 +229,25 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
 		return -ENODEV;
 	}
 
-	if (max77686->type == TYPE_MAX77686) {
-		max77686->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC);
-		if (!max77686->rtc) {
-			dev_err(max77686->dev,
-				"Failed to allocate I2C device for RTC\n");
-			return -ENODEV;
-		}
-		i2c_set_clientdata(max77686->rtc, max77686);
-
-		max77686->rtc_regmap =
-			devm_regmap_init_i2c(max77686->rtc,
-					     &max77686_rtc_regmap_config);
-		if (IS_ERR(max77686->rtc_regmap)) {
-			ret = PTR_ERR(max77686->rtc_regmap);
-			dev_err(max77686->dev,
-				"failed to allocate RTC regmap: %d\n",
-				ret);
-			goto err_unregister_i2c;
-		}
-	}
-
 	ret = regmap_add_irq_chip(max77686->regmap, max77686->irq,
 				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
 				  IRQF_SHARED, 0, irq_chip,
 				  &max77686->irq_data);
-	if (ret) {
+	if (ret < 0) {
 		dev_err(&i2c->dev, "failed to add PMIC irq chip: %d\n", ret);
-		goto err_unregister_i2c;
-	}
-
-	ret = regmap_add_irq_chip(*rtc_regmap, max77686->irq,
-				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
-				  IRQF_SHARED, 0, rtc_irq_chip,
-				  &max77686->rtc_irq_data);
-	if (ret) {
-		dev_err(&i2c->dev, "failed to add RTC irq chip: %d\n", ret);
-		goto err_del_irqc;
+		return ret;
 	}
 
 	ret = mfd_add_devices(max77686->dev, -1, cells, n_devs, NULL, 0, NULL);
 	if (ret < 0) {
 		dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
-		goto err_del_rtc_irqc;
+		goto err_del_irqc;
 	}
 
 	return 0;
 
-err_del_rtc_irqc:
-	regmap_del_irq_chip(max77686->irq, max77686->rtc_irq_data);
 err_del_irqc:
 	regmap_del_irq_chip(max77686->irq, max77686->irq_data);
-err_unregister_i2c:
-	if (max77686->type == TYPE_MAX77686)
-		i2c_unregister_device(max77686->rtc);
 
 	return ret;
 }
@@ -334,12 +258,8 @@ static int max77686_i2c_remove(struct i2c_client *i2c)
 
 	mfd_remove_devices(max77686->dev);
 
-	regmap_del_irq_chip(max77686->irq, max77686->rtc_irq_data);
 	regmap_del_irq_chip(max77686->irq, max77686->irq_data);
 
-	if (max77686->type == TYPE_MAX77686)
-		i2c_unregister_device(max77686->rtc);
-
 	return 0;
 }
 

drivers/rtc/Kconfig

View file

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 376322f..544bd34 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -140,7 +140,6 @@ config RTC_DRV_TEST
 	  will be called rtc-test.
 
 comment "I2C RTC drivers"
-	depends on I2C
 
 if I2C
 
@@ -212,6 +211,15 @@ config RTC_DRV_DS1307
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-ds1307.
 
+config RTC_DRV_DS1307_HWMON
+	bool "HWMON support for rtc-ds1307"
+	depends on RTC_DRV_DS1307 && HWMON
+	depends on !(RTC_DRV_DS1307=y && HWMON=m)
+	default y
+	help
+	  Say Y here if you want to expose temperature sensor data on
+	  rtc-ds1307 (only DS3231)
+
 config RTC_DRV_DS1374
 	tristate "Dallas/Maxim DS1374"
 	help
@@ -239,16 +247,6 @@ config RTC_DRV_DS1672
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-ds1672.
 
-config RTC_DRV_DS3232
-	tristate "Dallas/Maxim DS3232"
-	help
-	  If you say yes here you get support for Dallas Semiconductor
-	  DS3232 real-time clock chips. If an interrupt is associated
-	  with the device, the alarm functionality is supported.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called rtc-ds3232.
-
 config RTC_DRV_HYM8563
 	tristate "Haoyu Microelectronics HYM8563"
 	depends on OF
@@ -317,10 +315,10 @@ config RTC_DRV_MAX8997
 
 config RTC_DRV_MAX77686
 	tristate "Maxim MAX77686"
-	depends on MFD_MAX77686
+	depends on MFD_MAX77686 || MFD_MAX77620
 	help
 	  If you say yes here you will get support for the
-	  RTC of Maxim MAX77686 PMIC.
+	  RTC of Maxim MAX77686/MAX77620/MAX77802 PMIC.
 
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-max77686.
@@ -335,16 +333,6 @@ config RTC_DRV_RK808
 	  This driver can also be built as a module. If so, the module
 	  will be called rk808-rtc.
 
-config RTC_DRV_MAX77802
-	tristate "Maxim 77802 RTC"
-	depends on MFD_MAX77686
-	help
-	  If you say yes here you will get support for the
-	  RTC of Maxim MAX77802 PMIC.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called rtc-max77802.
-
 config RTC_DRV_RS5C372
 	tristate "Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A"
 	help
@@ -391,25 +379,6 @@ config RTC_DRV_X1205
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-x1205.
 
-config RTC_DRV_PALMAS
-	tristate "TI Palmas RTC driver"
-	depends on MFD_PALMAS
-	help
-	  If you say yes here you get support for the RTC of TI PALMA series PMIC
-	  chips.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called rtc-palma.
-
-config RTC_DRV_PCF2127
-	tristate "NXP PCF2127"
-	help
-	  If you say yes here you get support for the NXP PCF2127/29 RTC
-	  chips.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called rtc-pcf2127.
-
 config RTC_DRV_PCF8523
 	tristate "NXP PCF8523"
 	help
@@ -419,6 +388,14 @@ config RTC_DRV_PCF8523
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-pcf8523.
 
+config RTC_DRV_PCF85063
+	tristate "NXP PCF85063"
+	help
+	  If you say yes here you get support for the PCF85063 RTC chip
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-pcf85063.
+
 config RTC_DRV_PCF8563
 	tristate "Philips PCF8563/Epson RTC8564"
 	help
@@ -429,14 +406,6 @@ config RTC_DRV_PCF8563
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-pcf8563.
 
-config RTC_DRV_PCF85063
-	tristate "nxp PCF85063"
-	help
-	  If you say yes here you get support for the PCF85063 RTC chip
-
-	  This driver can also be built as a module. If so, the module
-	  will be called rtc-pcf85063.
-
 config RTC_DRV_PCF8583
 	tristate "Philips PCF8583"
 	help
@@ -501,6 +470,16 @@ config RTC_DRV_TWL4030
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-twl.
 
+config RTC_DRV_PALMAS
+	tristate "TI Palmas RTC driver"
+	depends on MFD_PALMAS
+	help
+	  If you say yes here you get support for the RTC of TI PALMA series PMIC
+	  chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-palma.
+
 config RTC_DRV_TPS6586X
 	tristate "TI TPS6586X RTC driver"
 	depends on MFD_TPS6586X
@@ -595,14 +574,23 @@ config RTC_DRV_EM3027
 	  will be called rtc-em3027.
 
 config RTC_DRV_RV3029C2
-	tristate "Micro Crystal RTC"
+	tristate "Micro Crystal RV3029"
 	help
 	  If you say yes here you get support for the Micro Crystal
-	  RV3029-C2 RTC chips.
+	  RV3029 RTC chips.
 
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-rv3029c2.
 
+config RTC_DRV_RV3029_HWMON
+	bool "HWMON support for RV3029"
+	depends on RTC_DRV_RV3029C2 && HWMON
+	depends on !(RTC_DRV_RV3029C2=y && HWMON=m)
+	default y
+	help
+	  Say Y here if you want to expose temperature sensor data on
+	  rtc-rv3029c2.
+
 config RTC_DRV_RV8803
 	tristate "Micro Crystal RV8803"
 	help
@@ -691,15 +679,6 @@ config RTC_DRV_DS1390
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-ds1390.
 
-config RTC_DRV_MAX6902
-	tristate "Maxim MAX6902"
-	help
-	  If you say yes here you will get support for the
-	  Maxim MAX6902 SPI RTC chip.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called rtc-max6902.
-
 config RTC_DRV_R9701
 	tristate "Epson RTC-9701JE"
 	help
@@ -709,6 +688,23 @@ config RTC_DRV_R9701
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-r9701.
 
+config RTC_DRV_RX4581
+	tristate "Epson RX-4581"
+	help
+	  If you say yes here you will get support for the Epson RX-4581.
+
+	  This driver can also be built as a module. If so the module
+	  will be called rtc-rx4581.
+
+config RTC_DRV_RX6110
+	tristate "Epson RX-6110"
+	select REGMAP_SPI
+	help
+	  If you say yes here you will get support for the Epson RX-6610.
+
+	  This driver can also be built as a module. If so the module
+	  will be called rtc-rx6110.
+
 config RTC_DRV_RS5C348
 	tristate "Ricoh RS5C348A/B"
 	help
@@ -718,14 +714,14 @@ config RTC_DRV_RS5C348
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-rs5c348.
 
-config RTC_DRV_DS3234
-	tristate "Maxim/Dallas DS3234"
+config RTC_DRV_MAX6902
+	tristate "Maxim MAX6902"
 	help
-	  If you say yes here you get support for the
-	  Maxim/Dallas DS3234 SPI RTC chip.
+	  If you say yes here you will get support for the
+	  Maxim MAX6902 SPI RTC chip.
 
 	  This driver can also be built as a module. If so, the module
-	  will be called rtc-ds3234.
+	  will be called rtc-max6902.
 
 config RTC_DRV_PCF2123
 	tristate "NXP PCF2123"
@@ -736,14 +732,6 @@ config RTC_DRV_PCF2123
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-pcf2123.
 
-config RTC_DRV_RX4581
-	tristate "Epson RX-4581"
-	help
-	  If you say yes here you will get support for the Epson RX-4581.
-
-	  This driver can also be built as a module. If so the module
-	  will be called rtc-rx4581.
-
 config RTC_DRV_MCP795
 	tristate "Microchip MCP795"
 	help
@@ -754,6 +742,41 @@ config RTC_DRV_MCP795
 
 endif # SPI_MASTER
 
+#
+# Helper to resolve issues with configs that have SPI enabled but I2C
+# modular.  See SND_SOC_I2C_AND_SPI for more information
+#
+config RTC_I2C_AND_SPI
+	tristate
+	default m if I2C=m
+	default y if I2C=y
+	default y if SPI_MASTER=y
+	select REGMAP_I2C if I2C
+	select REGMAP_SPI if SPI_MASTER
+
+comment "SPI and I2C RTC drivers"
+
+config RTC_DRV_DS3232
+	tristate "Dallas/Maxim DS3232/DS3234"
+	depends on RTC_I2C_AND_SPI
+	help
+	  If you say yes here you get support for Dallas Semiconductor
+	  DS3232 and DS3234 real-time clock chips. If an interrupt is associated
+	  with the device, the alarm functionality is supported.