Merge branch 'spi-5.1' into spi-next

14dbfb41 · Mark Brown <[email protected]> · 2019-03-04 15:32:51 +00:00

Commit: 14dbfb417bd80c96ec700c7a8414bb6f5db7ecd2
Parents: b50c6ac8 · 0e836c3b

Merge commit. Changes below are compared with the first parent: b50c6ac8.

Changes

66 files changed · +5004 −2432

File	Status	Add	Del	Content
Documentation/devicetree/bindings/spi/atmel-quadspi.txt	modified	+9	−3	View file
Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt	modified	+1	−0	View file
Documentation/devicetree/bindings/mtd/fsl-quadspi.txt → Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt	renamed	+8	−10	View file
Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt	added	+39	−0	View file
Documentation/devicetree/bindings/spi/spi-sifive.txt	added	+37	−0	View file
Documentation/devicetree/bindings/spi/spi-sprd.txt	modified	+7	−0	View file
Documentation/devicetree/bindings/spi/spi-stm32.txt	modified	+6	−3	View file
Documentation/spi/pxa2xx	modified	+5	−5	View file
MAINTAINERS	modified	+10	−2	View file
arch/arm/mach-pxa/cm-x255.c	modified	+1	−1	View file
arch/arm/mach-pxa/cm-x270.c	modified	+1	−1	View file
arch/arm/mach-pxa/corgi.c	modified	+1	−1	View file
arch/arm/mach-pxa/devices.c	modified	+1	−1	View file
arch/arm/mach-pxa/em-x270.c	modified	+2	−2	View file
arch/arm/mach-pxa/hx4700.c	modified	+1	−1	View file
arch/arm/mach-pxa/icontrol.c	modified	+2	−2	View file
arch/arm/mach-pxa/littleton.c	modified	+1	−1	View file
arch/arm/mach-pxa/lubbock.c	modified	+1	−1	View file
arch/arm/mach-pxa/magician.c	modified	+1	−1	View file
arch/arm/mach-pxa/pcm027.c	modified	+1	−1	View file
arch/arm/mach-pxa/poodle.c	modified	+1	−1	View file
arch/arm/mach-pxa/spitz.c	modified	+1	−1	View file
arch/arm/mach-pxa/stargate2.c	modified	+3	−3	View file
arch/arm/mach-pxa/tosa.c	modified	+1	−1	View file
arch/arm/mach-pxa/z2.c	modified	+2	−2	View file
arch/arm/mach-pxa/zeus.c	modified	+1	−1	View file
arch/mips/ath79/dev-spi.h	modified	+1	−1	View file
drivers/gpio/gpiolib-of.c	modified	+1	−1	View file
drivers/mtd/spi-nor/Kconfig	modified	+0	−9	View file
drivers/mtd/spi-nor/Makefile	modified	+0	−1	View file
drivers/mtd/spi-nor/fsl-quadspi.c	deleted	+0	−1224	View before deletion
drivers/spi/Kconfig	modified	+31	−5	View file
drivers/spi/Makefile	modified	+3	−0	View file
drivers/spi/atmel-quadspi.c	modified	+175	−95	View file
drivers/spi/spi-ath79.c	modified	+24	−90	View file
drivers/spi/spi-atmel.c	modified	+32	−70	View file
drivers/spi/spi-bcm2835aux.c	modified	+1	−1	View file
drivers/spi/spi-bitbang.c	modified	+0	−13	View file
drivers/spi/spi-cadence.c	modified	+9	−75	View file
drivers/spi/spi-clps711x.c	modified	+2	−21	View file
drivers/spi/spi-davinci.c	modified	+13	−41	View file
drivers/spi/spi-dw-mmio.c	modified	+0	−22	View file
drivers/spi/spi-dw.c	modified	+5	−13	View file
drivers/spi/spi-fsl-dspi.c	modified	+30	−10	View file
drivers/spi/spi-fsl-qspi.c	added	+966	−0	View file
drivers/spi/spi-geni-qcom.c	modified	+26	−30	View file
drivers/spi/spi-mem.c	modified	+69	−0	View file
drivers/spi/spi-mxs.c	modified	+5	−0	View file
drivers/spi/spi-nxp-fspi.c	added	+1106	−0	View file
drivers/spi/spi-pl022.c	modified	+29	−1	View file
drivers/spi/spi-pxa2xx-dma.c	modified	+29	−29	View file
drivers/spi/spi-pxa2xx-pci.c	modified	+2	−2	View file
drivers/spi/spi-pxa2xx.c	modified	+79	−79	View file
drivers/spi/spi-pxa2xx.h	modified	+2	−2	View file
drivers/spi/spi-rspi.c	modified	+85	−85	View file
drivers/spi/spi-sh-hspi.c	modified	+18	−21	View file
drivers/spi/spi-sh-msiof.c	modified	+92	−92	View file
drivers/spi/spi-sifive.c	added	+448	−0	View file
drivers/spi/spi-sprd.c	modified	+341	−3	View file
drivers/spi/spi-stm32.c	modified	+1072	−331	View file
drivers/spi/spi.c	modified	+105	−10	View file
arch/mips/include/asm/mach-ath79/ath79_spi_platform.h → include/linux/platform_data/spi-ath79.h	renamed	+0	−0	View file
include/linux/spi/pxa2xx_spi.h	modified	+2	−2	View file
include/linux/spi/spi-mem.h	modified	+5	−0	View file
include/linux/spi/spi.h	modified	+25	−4	View file
include/trace/events/spi.h	modified	+27	−4	View file

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/devicetree/bindings/spi/atmel-quadspi.txt

View file

diff --git a/Documentation/devicetree/bindings/spi/atmel-quadspi.txt b/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
index b93c1e2..7c40ea6 100644
--- a/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
+++ b/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
@@ -1,14 +1,19 @@
 * Atmel Quad Serial Peripheral Interface (QSPI)
 
 Required properties:
-- compatible:     Should be "atmel,sama5d2-qspi".
+- compatible:     Should be one of the following:
+		  - "atmel,sama5d2-qspi"
+		  - "microchip,sam9x60-qspi"
 - reg:            Should contain the locations and lengths of the base registers
                   and the mapped memory.
 - reg-names:      Should contain the resource reg names:
                   - qspi_base: configuration register address space
                   - qspi_mmap: memory mapped address space
 - interrupts:     Should contain the interrupt for the device.
-- clocks:         The phandle of the clock needed by the QSPI controller.
+- clocks:         Should reference the peripheral clock and the QSPI system
+                  clock if available.
+- clock-names:    Should contain "pclk" for the peripheral clock and "qspick"
+                  for the system clock when available.
 - #address-cells: Should be <1>.
 - #size-cells:    Should be <0>.
 
@@ -19,7 +24,8 @@ spi@f0020000 {
 	reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>;
 	reg-names = "qspi_base", "qspi_mmap";
 	interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
-	clocks = <&spi0_clk>;
+	clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
+	clock-names = "pclk";
 	#address-cells = <1>;
 	#size-cells = <0>;
 	pinctrl-names = "default";

Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt

View file

diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
index e3c48b2..2d32641 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@@ -10,6 +10,7 @@ Required properties:
   - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
   - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
   - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
+  - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain CSPI/eCSPI interrupt
 - clocks : Clock specifiers for both ipg and per clocks.

Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt

View file

diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt
similarity index 83%
rename from Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
rename to Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt
index 483e9cf..e8f1d62 100644
--- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt
@@ -14,15 +14,13 @@ Required properties:
   - clocks : The clocks needed by the QuadSPI controller
   - clock-names : Should contain the name of the clocks: "qspi_en" and "qspi".
 
-Optional properties:
-  - fsl,qspi-has-second-chip: The controller has two buses, bus A and bus B.
-                              Each bus can be connected with two NOR flashes.
-			      Most of the time, each bus only has one NOR flash
-			      connected, this is the default case.
-			      But if there are two NOR flashes connected to the
-			      bus, you should enable this property.
-			      (Please check the board's schematic.)
-  - big-endian : That means the IP register is big endian
+Required SPI slave node properties:
+  - reg: There are two buses (A and B) with two chip selects each.
+	 This encodes to which bus and CS the flash is connected:
+		<0>: Bus A, CS 0
+		<1>: Bus A, CS 1
+		<2>: Bus B, CS 0
+		<3>: Bus B, CS 1
 
 Example:
 
@@ -40,7 +38,7 @@ qspi0: quadspi@40044000 {
 	};
 };
 
-Example showing the usage of two SPI NOR devices:
+Example showing the usage of two SPI NOR devices on bus A:
 
 &qspi2 {
 	pinctrl-names = "default";

Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt

View file

diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt
new file mode 100644
index 0000000..2cd67eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt
@@ -0,0 +1,39 @@
+* NXP Flex Serial Peripheral Interface (FSPI)
+
+Required properties:
+  - compatible : Should be "nxp,lx2160a-fspi"
+  - reg :        First contains the register location and length,
+                 Second contains the memory mapping address and length
+  - reg-names :  Should contain the resource reg names:
+	         - fspi_base: configuration register address space
+                 - fspi_mmap: memory mapped address space
+  - interrupts : Should contain the interrupt for the device
+
+Required SPI slave node properties:
+  - reg :        There are two buses (A and B) with two chip selects each.
+                 This encodes to which bus and CS the flash is connected:
+                 - <0>: Bus A, CS 0
+                 - <1>: Bus A, CS 1
+                 - <2>: Bus B, CS 0
+                 - <3>: Bus B, CS 1
+
+Example showing the usage of two SPI NOR slave devices on bus A:
+
+fspi0: spi@20c0000 {
+	compatible = "nxp,lx2160a-fspi";
+	reg = <0x0 0x20c0000 0x0 0x10000>, <0x0 0x20000000 0x0 0x10000000>;
+	reg-names = "fspi_base", "fspi_mmap";
+	interrupts = <0 25 0x4>; /* Level high type */
+	clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+	clock-names = "fspi_en", "fspi";
+
+	mt35xu512aba0: flash@0 {
+		reg = <0>;
+		....
+	};
+
+	mt35xu512aba1: flash@1 {
+		reg = <1>;
+		....
+	};
+};

Documentation/devicetree/bindings/spi/spi-sifive.txt

View file

diff --git a/Documentation/devicetree/bindings/spi/spi-sifive.txt b/Documentation/devicetree/bindings/spi/spi-sifive.txt
new file mode 100644
index 0000000..3f5c6e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-sifive.txt
@@ -0,0 +1,37 @@
+SiFive SPI controller Device Tree Bindings
+------------------------------------------
+
+Required properties:
+- compatible		: Should be "sifive,<chip>-spi" and "sifive,spi<version>".
+			  Supported compatible strings are:
+			  "sifive,fu540-c000-spi" for the SiFive SPI v0 as integrated
+			  onto the SiFive FU540 chip, and "sifive,spi0" for the SiFive
+			  SPI v0 IP block with no chip integration tweaks.
+			  Please refer to sifive-blocks-ip-versioning.txt for details
+- reg			: Physical base address and size of SPI registers map
+			  A second (optional) range can indicate memory mapped flash
+- interrupts		: Must contain one entry
+- interrupt-parent	: Must be core interrupt controller
+- clocks		: Must reference the frequency given to the controller
+- #address-cells	: Must be '1', indicating which CS to use
+- #size-cells		: Must be '0'
+
+Optional properties:
+- sifive,fifo-depth		: Depth of hardware queues; defaults to 8
+- sifive,max-bits-per-word	: Maximum bits per word; defaults to 8
+
+SPI RTL that corresponds to the IP block version numbers can be found here:
+https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/spi
+
+Example:
+	spi: spi@10040000 {
+		compatible = "sifive,fu540-c000-spi", "sifive,spi0";
+		reg = <0x0 0x10040000 0x0 0x1000 0x0 0x20000000 0x0 0x10000000>;
+		interrupt-parent = <&plic>;
+		interrupts = <51>;
+		clocks = <&tlclk>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		sifive,fifo-depth = <8>;
+		sifive,max-bits-per-word = <8>;
+	};

Documentation/devicetree/bindings/spi/spi-sprd.txt

View file

diff --git a/Documentation/devicetree/bindings/spi/spi-sprd.txt b/Documentation/devicetree/bindings/spi/spi-sprd.txt
index bad211a..3c7eacc 100644
--- a/Documentation/devicetree/bindings/spi/spi-sprd.txt
+++ b/Documentation/devicetree/bindings/spi/spi-sprd.txt
@@ -14,6 +14,11 @@ Required properties:
 	address on the SPI bus. Should be set to 1.
 - #size-cells: Should be set to 0.
 
+Optional properties:
+dma-names: Should contain names of the SPI used DMA channel.
+dmas: Should contain DMA channels and DMA slave ids which the SPI used
+	sorted in the same order as the dma-names property.
+
 Example:
 spi0: spi@70a00000{
 	compatible = "sprd,sc9860-spi";
@@ -21,6 +26,8 @@ spi0: spi@70a00000{
 	interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	clock-names = "spi", "source","enable";
 	clocks = <&clk_spi0>, <&ext_26m>, <&clk_ap_apb_gates 5>;
+	dma-names = "rx_chn", "tx_chn";
+	dmas = <&apdma 11 11>, <&apdma 12 12>;
 	#address-cells = <1>;
 	#size-cells = <0>;
 };

Documentation/devicetree/bindings/spi/spi-stm32.txt

View file

diff --git a/Documentation/devicetree/bindings/spi/spi-stm32.txt b/Documentation/devicetree/bindings/spi/spi-stm32.txt
index 1b3fa2c..d82755c 100644
--- a/Documentation/devicetree/bindings/spi/spi-stm32.txt
+++ b/Documentation/devicetree/bindings/spi/spi-stm32.txt
@@ -7,7 +7,9 @@ from 4 to 32-bit data size. Although it can be configured as master or slave,
 only master is supported by the driver.
 
 Required properties:
-- compatible: Must be "st,stm32h7-spi".
+- compatible: Should be one of:
+  "st,stm32h7-spi"
+  "st,stm32f4-spi"
 - reg: Offset and length of the device's register set.
 - interrupts: Must contain the interrupt id.
 - clocks: Must contain an entry for spiclk (which feeds the internal clock
@@ -30,8 +32,9 @@ Child nodes represent devices on the SPI bus
   See ../spi/spi-bus.txt
 
 Optional properties:
-- st,spi-midi-ns: (Master Inter-Data Idleness) minimum time delay in
-		  nanoseconds inserted between two consecutive data frames.
+- st,spi-midi-ns: Only for STM32H7, (Master Inter-Data Idleness) minimum time
+		  delay in nanoseconds inserted between two consecutive data
+		  frames.
 
 
 Example:

Documentation/spi/pxa2xx

View file

diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx
index 13a0b7f..551325b 100644
--- a/Documentation/spi/pxa2xx
+++ b/Documentation/spi/pxa2xx
@@ -21,15 +21,15 @@ Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a
 "platform device".  The master configuration is passed to the driver via a table
 found in include/linux/spi/pxa2xx_spi.h:
 
-struct pxa2xx_spi_master {
+struct pxa2xx_spi_controller {
 	u16 num_chipselect;
 	u8 enable_dma;
 };
 
-The "pxa2xx_spi_master.num_chipselect" field is used to determine the number of
+The "pxa2xx_spi_controller.num_chipselect" field is used to determine the number of
 slave device (chips) attached to this SPI master.
 
-The "pxa2xx_spi_master.enable_dma" field informs the driver that SSP DMA should
+The "pxa2xx_spi_controller.enable_dma" field informs the driver that SSP DMA should
 be used.  This caused the driver to acquire two DMA channels: rx_channel and
 tx_channel.  The rx_channel has a higher DMA service priority the tx_channel.
 See the "PXA2xx Developer Manual" section "DMA Controller".
@@ -51,7 +51,7 @@ static struct resource pxa_spi_nssp_resources[] = {
 	},
 };
 
-static struct pxa2xx_spi_master pxa_nssp_master_info = {
+static struct pxa2xx_spi_controller pxa_nssp_master_info = {
 	.num_chipselect = 1, /* Matches the number of chips attached to NSSP */
 	.enable_dma = 1, /* Enables NSSP DMA */
 };
@@ -206,7 +206,7 @@ DMA and PIO I/O Support
 -----------------------
 The pxa2xx_spi driver supports both DMA and interrupt driven PIO message
 transfers.  The driver defaults to PIO mode and DMA transfers must be enabled
-by setting the "enable_dma" flag in the "pxa2xx_spi_master" structure.  The DMA
+by setting the "enable_dma" flag in the "pxa2xx_spi_controller" structure.  The DMA
 mode supports both coherent and stream based DMA mappings.
 
 The following logic is used to determine the type of I/O to be used on

MAINTAINERS

View file

diff --git a/MAINTAINERS b/MAINTAINERS
index dce5c09..ecb33bc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6105,9 +6105,9 @@ F:	Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
 
 FREESCALE QUAD SPI DRIVER
 M:	Han Xu <[email protected]>
-L:	[email protected]
+L:	[email protected]
 S:	Maintained
-F:	drivers/mtd/spi-nor/fsl-quadspi.c
+F:	drivers/spi/spi-fsl-qspi.c
 
 FREESCALE QUICC ENGINE LIBRARY
 M:	Qiang Zhao <[email protected]>
@@ -10944,6 +10944,14 @@ F:	lib/objagg.c
 F:	lib/test_objagg.c
 F:	include/linux/objagg.h
 
+NXP FSPI DRIVER
+R:	Yogesh Gaur <[email protected]>
+M:	Ashish Kumar <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	drivers/spi/spi-nxp-fspi.c
+F:	Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt
+
 OBJTOOL
 M:	Josh Poimboeuf <[email protected]>
 M:	Peter Zijlstra <[email protected]>

arch/arm/mach-pxa/cm-x255.c

View file

diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index fa8e7dd..4401dfc 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -98,7 +98,7 @@ static unsigned long cmx255_pin_config[] = {
 };
 
 #if defined(CONFIG_SPI_PXA2XX)
-static struct pxa2xx_spi_master pxa_ssp_master_info = {
+static struct pxa2xx_spi_controller pxa_ssp_master_info = {
 	.num_chipselect	= 1,
 };
 

arch/arm/mach-pxa/cm-x270.c

View file

diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index f7081a5..279eeca 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -313,7 +313,7 @@ static inline void cmx270_init_mmc(void) {}
 #endif
 
 #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master cm_x270_spi_info = {
+static struct pxa2xx_spi_controller cm_x270_spi_info = {
 	.num_chipselect	= 1,
 	.enable_dma	= 1,
 };

arch/arm/mach-pxa/corgi.c

View file

diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index c9732ca..7ecf559 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -530,7 +530,7 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
 };
 
 #if IS_ENABLED(CONFIG_SPI_PXA2XX)
-static struct pxa2xx_spi_master corgi_spi_info = {
+static struct pxa2xx_spi_controller corgi_spi_info = {
 	.num_chipselect	= 3,
 };
 

arch/arm/mach-pxa/devices.c

View file

diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index a24783a..524d609 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -1065,7 +1065,7 @@ struct platform_device pxa93x_device_gpio = {
 
 /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
  * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
-void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
+void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_controller *info)
 {
 	struct platform_device *pd;
 

arch/arm/mach-pxa/em-x270.c

View file

diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 32c1ede..5e37276 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -689,7 +689,7 @@ static inline void em_x270_init_lcd(void) {}
 #endif
 
 #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master em_x270_spi_info = {
+static struct pxa2xx_spi_controller em_x270_spi_info = {
 	.num_chipselect	= 1,
 };
 
@@ -703,7 +703,7 @@ static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
 	.model = TDO35S,
 };
 
-static struct pxa2xx_spi_master em_x270_spi_2_info = {
+static struct pxa2xx_spi_controller em_x270_spi_2_info = {
 	.num_chipselect	= 1,
 	.enable_dma	= 1,
 };

arch/arm/mach-pxa/hx4700.c

View file

diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index b79b757..c3b4755 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -629,7 +629,7 @@ static struct spi_board_info tsc2046_board_info[] __initdata = {
 	},
 };
 
-static struct pxa2xx_spi_master pxa_ssp2_master_info = {
+static struct pxa2xx_spi_controller pxa_ssp2_master_info = {
 	.num_chipselect = 1,
 	.enable_dma     = 1,
 };

arch/arm/mach-pxa/icontrol.c

View file

diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index cbaf4f6..7e30452 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -115,12 +115,12 @@ static struct spi_board_info mcp251x_board_info[] = {
 	}
 };
 
-static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = {
+static struct pxa2xx_spi_controller pxa_ssp3_spi_master_info = {
 	.num_chipselect = 2,
 	.enable_dma     = 1
 };
 
-static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = {
+static struct pxa2xx_spi_controller pxa_ssp4_spi_master_info = {
 	.num_chipselect = 2,
 	.enable_dma     = 1
 };

arch/arm/mach-pxa/littleton.c

View file

diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 39db489..464b8bd 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -191,7 +191,7 @@ static inline void littleton_init_lcd(void) {};
 #endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
 
 #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master littleton_spi_info = {
+static struct pxa2xx_spi_controller littleton_spi_info = {
 	.num_chipselect		= 1,
 };
 

arch/arm/mach-pxa/lubbock.c

View file

diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index a1391e1..c1bd0d5 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -197,7 +197,7 @@ static struct platform_device sa1111_device = {
  * (to J5) and poking board registers (as done below).  Else it's only useful
  * for the temperature sensors.
  */
-static struct pxa2xx_spi_master pxa_ssp_master_info = {
+static struct pxa2xx_spi_controller pxa_ssp_master_info = {
 	.num_chipselect	= 1,
 };
 

arch/arm/mach-pxa/magician.c

View file

diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 08b0796..618bcff 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -932,7 +932,7 @@ struct pxa2xx_spi_chip tsc2046_chip_info = {
 	.gpio_cs	= GPIO14_MAGICIAN_TSC2046_CS,
 };
 
-static struct pxa2xx_spi_master magician_spi_info = {
+static struct pxa2xx_spi_controller magician_spi_info = {
 	.num_chipselect	= 1,
 	.enable_dma	= 1,
 };

arch/arm/mach-pxa/pcm027.c

View file

diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index ccca9f7..e2e6134 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -132,7 +132,7 @@ static struct platform_device smc91x_device = {
 /*
  * SPI host and devices
  */
-static struct pxa2xx_spi_master pxa_ssp_master_info = {
+static struct pxa2xx_spi_controller pxa_ssp_master_info = {
 	.num_chipselect	= 1,
 };
 

arch/arm/mach-pxa/poodle.c

View file

diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index c2a43d4..9450a52 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -196,7 +196,7 @@ struct platform_device poodle_locomo_device = {
 EXPORT_SYMBOL(poodle_locomo_device);
 
 #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master poodle_spi_info = {
+static struct pxa2xx_spi_controller poodle_spi_info = {
 	.num_chipselect	= 1,
 };
 

arch/arm/mach-pxa/spitz.c

View file

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 306818e..8dac824 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -572,7 +572,7 @@ static struct spi_board_info spitz_spi_devices[] = {
 	},
 };
 
-static struct pxa2xx_spi_master spitz_spi_info = {
+static struct pxa2xx_spi_controller spitz_spi_info = {
 	.num_chipselect	= 3,
 };
 

arch/arm/mach-pxa/stargate2.c

View file

diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index e0d6c87..c28d19b 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -337,15 +337,15 @@ static struct platform_device stargate2_flash_device = {
 	.num_resources = 1,
 };
 
-static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
+static struct pxa2xx_spi_controller pxa_ssp_master_0_info = {
 	.num_chipselect = 1,
 };
 
-static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
+static struct pxa2xx_spi_controller pxa_ssp_master_1_info = {
 	.num_chipselect = 1,
 };
 
-static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
+static struct pxa2xx_spi_controller pxa_ssp_master_2_info = {
 	.num_chipselect = 1,
 };
 

arch/arm/mach-pxa/tosa.c

View file

diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index e8a93c0..7439798 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -813,7 +813,7 @@ static struct platform_device tosa_bt_device = {
 	.dev.platform_data = &tosa_bt_data,
 };
 
-static struct pxa2xx_spi_master pxa_ssp_master_info = {
+static struct pxa2xx_spi_controller pxa_ssp_master_info = {
 	.num_chipselect	= 1,
 };
 

arch/arm/mach-pxa/z2.c

View file

diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index e2353e7..ad082e1 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -607,12 +607,12 @@ static struct spi_board_info spi_board_info[] __initdata = {
 },
 };
 
-static struct pxa2xx_spi_master pxa_ssp1_master_info = {
+static struct pxa2xx_spi_controller pxa_ssp1_master_info = {
 	.num_chipselect	= 1,
 	.enable_dma	= 1,
 };
 
-static struct pxa2xx_spi_master pxa_ssp2_master_info = {
+static struct pxa2xx_spi_controller pxa_ssp2_master_info = {
 	.num_chipselect	= 1,
 };
 

arch/arm/mach-pxa/zeus.c

View file

diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index c411f79..bdbcf46 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -391,7 +391,7 @@ static struct platform_device zeus_sram_device = {
 };
 
 /* SPI interface on SSP3 */
-static struct pxa2xx_spi_master pxa2xx_spi_ssp3_master_info = {
+static struct pxa2xx_spi_controller pxa2xx_spi_ssp3_master_info = {
 	.num_chipselect = 1,
 	.enable_dma     = 1,
 };

arch/mips/ath79/dev-spi.h

View file

diff --git a/arch/mips/ath79/dev-spi.h b/arch/mips/ath79/dev-spi.h
index d732565..6e15bc8 100644
--- a/arch/mips/ath79/dev-spi.h
+++ b/arch/mips/ath79/dev-spi.h
@@ -13,7 +13,7 @@
 #define _ATH79_DEV_SPI_H
 
 #include <linux/spi/spi.h>
-#include <asm/mach-ath79/ath79_spi_platform.h>
+#include <linux/platform_data/spi-ath79.h>
 
 void ath79_register_spi(struct ath79_spi_platform_data *pdata,
 			 struct spi_board_info const *info,

drivers/gpio/gpiolib-of.c

View file

diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index a6e1891..c34eb9d 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -125,7 +125,7 @@ static void of_gpio_flags_quirks(struct device_node *np,
 
 		for_each_child_of_node(np, child) {
 			ret = of_property_read_u32(child, "reg", &cs);
-			if (!ret)
+			if (ret)
 				continue;
 			if (cs == index) {
 				/*

drivers/mtd/spi-nor/Kconfig

View file

diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index 44fe801..b433e5f 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -50,15 +50,6 @@ config SPI_CADENCE_QUADSPI
 	  device with a Cadence QSPI controller and want to access the
 	  Flash as an MTD device.
 
-config SPI_FSL_QUADSPI
-	tristate "Freescale Quad SPI controller"
-	depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
-	depends on HAS_IOMEM
-	help
-	  This enables support for the Quad SPI controller in master mode.
-	  This controller does not support generic SPI. It only supports
-	  SPI NOR.
-
 config SPI_HISI_SFC
 	tristate "Hisilicon SPI-NOR Flash Controller(SFC)"
 	depends on ARCH_HISI || COMPILE_TEST