Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

1ead6581 · Linus Torvalds <[email protected]> · 2014-04-01 11:00:07 -07:00

Pull timer changes from Thomas Gleixner:
 "This assorted collection provides:

   - A new timer based timer broadcast feature for systems which do not
     provide a global accessible timer device.  That allows those
     systems to put CPUs into deep idle states where the per cpu timer
     device stops.

   - A few NOHZ_FULL related improvements to the timer wheel

   - The usual updates to timer devices found in ARM SoCs

   - Small improvements and updates all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  tick: Remove code duplication in tick_handle_periodic()
  tick: Fix spelling mistake in tick_handle_periodic()
  x86: hpet: Use proper destructor for delayed work
  workqueue: Provide destroy_delayed_work_on_stack()
  clocksource: CMT, MTU2, TMU and STI should depend on GENERIC_CLOCKEVENTS
  timer: Remove code redundancy while calling get_nohz_timer_target()
  hrtimer: Rearrange comments in the order struct members are declared
  timer: Use variable head instead of &work_list in __run_timers()
  clocksource: exynos_mct: silence a static checker warning
  arm: zynq: Add support for cpufreq
  arm: zynq: Don't use arm_global_timer with cpufreq
  clocksource/cadence_ttc: Overhaul clocksource frequency adjustment
  clocksource/cadence_ttc: Call clockevents_update_freq() with IRQs enabled
  clocksource: Add Kconfig entries for CMT, MTU2, TMU and STI
  sh: Remove Kconfig entries for TMU, CMT and MTU2
  ARM: shmobile: Remove CMT, TMU and STI Kconfig entries
  clocksource: armada-370-xp: Use atomic access for shared registers
  clocksource: orion: Use atomic access for shared registers
  clocksource: timer-keystone: Delete unnecessary variable
  clocksource: timer-keystone: introduce clocksource driver for Keystone
  ...

Commit: 1ead65812486cda65093683a99b8907a7242fa93
Parents: b6d739e9 · b97f0291

Merge commit. Changes below are compared with the first parent: b6d739e9.

Changes

44 files changed · +807 −226

File	Status	Add	Del	Content
Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt	modified	+2	−2	View file
Documentation/devicetree/bindings/timer/ti,keystone-timer.txt	added	+29	−0	View file
MAINTAINERS	modified	+1	−0	View file
arch/arm/boot/dts/sun4i-a10.dtsi	modified	+1	−1	View file
arch/arm/boot/dts/sun5i-a10s.dtsi	modified	+1	−1	View file
arch/arm/boot/dts/sun5i-a13.dtsi	modified	+1	−1	View file
arch/arm/boot/dts/sun6i-a31.dtsi	modified	+1	−1	View file
arch/arm/boot/dts/sun7i-a20.dtsi	modified	+1	−1	View file
arch/arm/boot/dts/zynq-7000.dtsi	modified	+6	−0	View file
arch/arm/mach-shmobile/Kconfig	modified	+18	−18	View file
arch/arm/mach-u300/Makefile	modified	+1	−1	View file
arch/arm/mach-zynq/Kconfig	modified	+3	−1	View file
arch/arm/mach-zynq/common.c	modified	+3	−0	View file
arch/sh/Kconfig	modified	+23	−53	View file
arch/x86/kernel/hpet.c	modified	+1	−1	View file
drivers/clocksource/Kconfig	modified	+48	−0	View file
drivers/clocksource/Makefile	modified	+2	−0	View file
drivers/clocksource/arm_arch_timer.c	modified	+1	−0	View file
drivers/clocksource/cadence_ttc_timer.c	modified	+86	−35	View file
drivers/clocksource/exynos_mct.c	modified	+1	−1	View file
drivers/clocksource/sun4i_timer.c	modified	+1	−1	View file
drivers/clocksource/time-armada-370-xp.c	modified	+4	−8	View file
drivers/clocksource/time-orion.c	modified	+10	−18	View file
drivers/clocksource/timer-keystone.c	added	+241	−0	View file
arch/arm/mach-u300/timer.c → drivers/clocksource/timer-u300.c	renamed	+0	−4	View file
drivers/cpuidle/cpuidle.c	modified	+8	−6	View file
fs/timerfd.c	modified	+1	−0	View file
include/linux/clockchips.h	modified	+13	−3	View file
include/linux/hrtimer.h	modified	+2	−2	View file
include/linux/sched.h	modified	+5	−1	View file
include/linux/workqueue.h	modified	+2	−0	View file
kernel/hrtimer.c	modified	+1	−14	View file
kernel/sched/core.c	modified	+4	−1	View file
kernel/time/Kconfig	modified	+1	−1	View file
kernel/time/Makefile	modified	+4	−1	View file
kernel/time/clockevents.c	modified	+30	−10	View file
kernel/time/ntp.c	modified	+3	−2	View file
kernel/time/tick-broadcast-hrtimer.c	added	+106	−0	View file
kernel/time/tick-broadcast.c	modified	+74	−11	View file
kernel/time/tick-common.c	modified	+8	−8	View file
kernel/time/tick-internal.h	modified	+8	−3	View file
kernel/time/timekeeping_debug.c	modified	+2	−0	View file
kernel/timer.c	modified	+42	−15	View file
kernel/workqueue.c	modified	+7	−0	View file

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt

View file

diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt
index 48aeb78..5c2e235 100644
--- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt
@@ -2,7 +2,7 @@ Allwinner A1X SoCs Timer Controller
 
 Required properties:
 
-- compatible : should be "allwinner,sun4i-timer"
+- compatible : should be "allwinner,sun4i-a10-timer"
 - reg : Specifies base physical address and size of the registers.
 - interrupts : The interrupt of the first timer
 - clocks: phandle to the source clock (usually a 24 MHz fixed clock)
@@ -10,7 +10,7 @@ Required properties:
 Example:
 
 timer {
-	compatible = "allwinner,sun4i-timer";
+	compatible = "allwinner,sun4i-a10-timer";
 	reg = <0x01c20c00 0x400>;
 	interrupts = <22>;
 	clocks = <&osc>;

Documentation/devicetree/bindings/timer/ti,keystone-timer.txt

View file

diff --git a/Documentation/devicetree/bindings/timer/ti,keystone-timer.txt b/Documentation/devicetree/bindings/timer/ti,keystone-timer.txt
new file mode 100644
index 0000000..5fbe361
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ti,keystone-timer.txt
@@ -0,0 +1,29 @@
+* Device tree bindings for Texas instruments Keystone timer
+
+This document provides bindings for the 64-bit timer in the KeyStone
+architecture devices. The timer can be configured as a general-purpose 64-bit
+timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
+timers, each half can operate in conjunction (chain mode) or independently
+(unchained mode) of each other.
+
+It is global timer is a free running up-counter and can generate interrupt
+when the counter reaches preset counter values.
+
+Documentation:
+http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
+
+Required properties:
+
+- compatible : should be "ti,keystone-timer".
+- reg : specifies base physical address and count of the registers.
+- interrupts : interrupt generated by the timer.
+- clocks : the clock feeding the timer clock.
+
+Example:
+
+timer@22f0000 {
+	compatible = "ti,keystone-timer";
+	reg = <0x022f0000 0x80>;
+	interrupts = <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>;
+	clocks = <&clktimer15>;
+};

MAINTAINERS

View file

diff --git a/MAINTAINERS b/MAINTAINERS
index 79031a5..d1f3cb3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1320,6 +1320,7 @@ M:	Linus Walleij <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
 S:	Supported
 F:	arch/arm/mach-u300/
+F:	drivers/clocksource/timer-u300.c
 F:	drivers/i2c/busses/i2c-stu300.c
 F:	drivers/rtc/rtc-coh901331.c
 F:	drivers/watchdog/coh901327_wdt.c

arch/arm/boot/dts/sun4i-a10.dtsi

View file

diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index d4d2763..2ce6122 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -403,7 +403,7 @@
 		};
 
 		timer@01c20c00 {
-			compatible = "allwinner,sun4i-timer";
+			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0x90>;
 			interrupts = <22>;
 			clocks = <&osc24M>;

arch/arm/boot/dts/sun5i-a10s.dtsi

View file

diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 79fd412..29dd32d 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -366,7 +366,7 @@
 		};
 
 		timer@01c20c00 {
-			compatible = "allwinner,sun4i-timer";
+			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0x90>;
 			interrupts = <22>;
 			clocks = <&osc24M>;

arch/arm/boot/dts/sun5i-a13.dtsi

View file

diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index c463fd7..e63bb38 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -329,7 +329,7 @@
 		};
 
 		timer@01c20c00 {
-			compatible = "allwinner,sun4i-timer";
+			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0x90>;
 			interrupts = <22>;
 			clocks = <&osc24M>;

arch/arm/boot/dts/sun6i-a31.dtsi

View file

diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 5256ad9..996fff5 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -231,7 +231,7 @@
 		};
 
 		timer@01c20c00 {
-			compatible = "allwinner,sun4i-timer";
+			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0xa0>;
 			interrupts = <0 18 4>,
 				     <0 19 4>,

arch/arm/boot/dts/sun7i-a20.dtsi

View file

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 6f25cf5..dddc8ac 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -435,7 +435,7 @@
 		};
 
 		timer@01c20c00 {
-			compatible = "allwinner,sun4i-timer";
+			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0x90>;
 			interrupts = <0 22 4>,
 				     <0 23 4>,

arch/arm/boot/dts/zynq-7000.dtsi

View file

diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 8b67b19..789d0ba 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -24,6 +24,12 @@
 			device_type = "cpu";
 			reg = <0>;
 			clocks = <&clkc 3>;
+			operating-points = <
+				/* kHz    uV */
+				666667  1000000
+				333334  1000000
+				222223  1000000
+			>;
 		};
 
 		cpu@1 {

arch/arm/mach-shmobile/Kconfig

View file

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 05fa505..f6db7dc 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -24,17 +24,21 @@ comment "Renesas ARM SoCs System Type"
 
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
+	select SYS_SUPPORTS_EM_STI
 
 config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
+	select SYS_SUPPORTS_SH_MTU2
 
 config ARCH_R8A7790
 	bool "R-Car H2 (R8A77900)"
 	select RENESAS_IRQC
+	select SYS_SUPPORTS_SH_CMT
 
 config ARCH_R8A7791
 	bool "R-Car M2 (R8A77910)"
 	select RENESAS_IRQC
+	select SYS_SUPPORTS_SH_CMT
 
 comment "Renesas ARM SoCs Board Type"
 
@@ -68,6 +72,8 @@ config ARCH_SH7372
 	select ARM_CPU_SUSPEND if PM || CPU_IDLE
 	select CPU_V7
 	select SH_CLK_CPG
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_SH73A0
 	bool "SH-Mobile AG5 (R8A73A00)"
@@ -77,6 +83,8 @@ config ARCH_SH73A0
 	select I2C
 	select SH_CLK_CPG
 	select RENESAS_INTC_IRQPIN
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A73A4
 	bool "R-Mobile APE6 (R8A73A40)"
@@ -87,6 +95,8 @@ config ARCH_R8A73A4
 	select RENESAS_IRQC
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A7740
 	bool "R-Mobile A1 (R8A77400)"
@@ -95,6 +105,8 @@ config ARCH_R8A7740
 	select CPU_V7
 	select SH_CLK_CPG
 	select RENESAS_INTC_IRQPIN
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A7778
 	bool "R-Car M1A (R8A77781)"
@@ -104,6 +116,7 @@ config ARCH_R8A7778
 	select ARM_GIC
 	select USB_ARCH_HAS_EHCI
 	select USB_ARCH_HAS_OHCI
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A7779
 	bool "R-Car H1 (R8A77790)"
@@ -114,6 +127,7 @@ config ARCH_R8A7779
 	select USB_ARCH_HAS_EHCI
 	select USB_ARCH_HAS_OHCI
 	select RENESAS_INTC_IRQPIN
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A7790
 	bool "R-Car H2 (R8A77900)"
@@ -123,6 +137,7 @@ config ARCH_R8A7790
 	select MIGHT_HAVE_PCI
 	select SH_CLK_CPG
 	select RENESAS_IRQC
+	select SYS_SUPPORTS_SH_CMT
 
 config ARCH_R8A7791
 	bool "R-Car M2 (R8A77910)"
@@ -132,6 +147,7 @@ config ARCH_R8A7791
 	select MIGHT_HAVE_PCI
 	select SH_CLK_CPG
 	select RENESAS_IRQC
+	select SYS_SUPPORTS_SH_CMT
 
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
@@ -141,6 +157,7 @@ config ARCH_EMEV2
 	select MIGHT_HAVE_PCI
 	select USE_OF
 	select AUTO_ZRELADDR
+	select SYS_SUPPORTS_EM_STI
 
 config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
@@ -148,6 +165,7 @@ config ARCH_R7S72100
 	select ARM_GIC
 	select CPU_V7
 	select SH_CLK_CPG
+	select SYS_SUPPORTS_SH_MTU2
 
 comment "Renesas ARM SoCs Board Type"
 
@@ -321,24 +339,6 @@ config SHMOBILE_TIMER_HZ
 	  want to select a HZ value such as 128 that can evenly divide RCLK.
 	  A HZ value that does not divide evenly may cause timer drift.
 
-config SH_TIMER_CMT
-	bool "CMT timer driver"
-	default y
-	help
-	  This enables build of the CMT timer driver.
-
-config SH_TIMER_TMU
-	bool "TMU timer driver"
-	default y
-	help
-	  This enables build of the TMU timer driver.
-
-config EM_TIMER_STI
-	bool "STI timer driver"
-	default y
-	help
-	  This enables build of the STI timer driver.
-
 endmenu
 
 endif

arch/arm/mach-u300/Makefile

View file

diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 0f362b6..3ec74ac 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel, U300 machine.
 #
 
-obj-y		:= core.o timer.o
+obj-y		:= core.o
 obj-m		:=
 obj-n		:=
 obj-		:=

arch/arm/mach-zynq/Kconfig

View file

diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 6b04260..f03e75b 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -2,6 +2,8 @@ config ARCH_ZYNQ
 	bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
 	select ARM_AMBA
 	select ARM_GIC
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
 	select COMMON_CLK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
@@ -13,6 +15,6 @@ config ARCH_ZYNQ
 	select HAVE_SMP
 	select SPARSE_IRQ
 	select CADENCE_TTC_TIMER
-	select ARM_GLOBAL_TIMER
+	select ARM_GLOBAL_TIMER if !CPU_FREQ
 	help
 	  Support for Xilinx Zynq ARM Cortex A9 Platform

arch/arm/mach-zynq/common.c

View file

diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 8c09a83..a39be8e 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -64,6 +64,8 @@ static struct platform_device zynq_cpuidle_device = {
  */
 static void __init zynq_init_machine(void)
 {
+	struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+
 	/*
 	 * 64KB way size, 8-way associativity, parity disabled
 	 */
@@ -72,6 +74,7 @@ static void __init zynq_init_machine(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
 	platform_device_register(&zynq_cpuidle_device);
+	platform_device_register_full(&devinfo);
 }
 
 static void __init zynq_timer_init(void)

arch/sh/Kconfig

View file

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 6357710..364d204 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -123,15 +123,6 @@ config SYS_SUPPORTS_NUMA
 config SYS_SUPPORTS_PCI
 	bool
 
-config SYS_SUPPORTS_CMT
-	bool
-
-config SYS_SUPPORTS_MTU2
-	bool
-
-config SYS_SUPPORTS_TMU
-	bool
-
 config STACKTRACE_SUPPORT
 	def_bool y
 
@@ -191,14 +182,14 @@ config CPU_SH3
 	bool
 	select CPU_HAS_INTEVT
 	select CPU_HAS_SR_RB
-	select SYS_SUPPORTS_TMU
+	select SYS_SUPPORTS_SH_TMU
 
 config CPU_SH4
 	bool
 	select CPU_HAS_INTEVT
 	select CPU_HAS_SR_RB
 	select CPU_HAS_FPU if !CPU_SH4AL_DSP
-	select SYS_SUPPORTS_TMU
+	select SYS_SUPPORTS_SH_TMU
 	select SYS_SUPPORTS_HUGETLBFS if MMU
 
 config CPU_SH4A
@@ -213,7 +204,7 @@ config CPU_SH4AL_DSP
 config CPU_SH5
 	bool
 	select CPU_HAS_FPU
-	select SYS_SUPPORTS_TMU
+	select SYS_SUPPORTS_SH_TMU
 	select SYS_SUPPORTS_HUGETLBFS if MMU
 
 config CPU_SHX2
@@ -250,7 +241,7 @@ choice
 config CPU_SUBTYPE_SH7619
 	bool "Support SH7619 processor"
 	select CPU_SH2
-	select SYS_SUPPORTS_CMT
+	select SYS_SUPPORTS_SH_CMT
 
 # SH-2A Processor Support
 
@@ -258,50 +249,50 @@ config CPU_SUBTYPE_SH7201
 	bool "Support SH7201 processor"
 	select CPU_SH2A
 	select CPU_HAS_FPU
-	select SYS_SUPPORTS_MTU2
+	select SYS_SUPPORTS_SH_MTU2
  
 config CPU_SUBTYPE_SH7203
 	bool "Support SH7203 processor"
 	select CPU_SH2A
 	select CPU_HAS_FPU
-	select SYS_SUPPORTS_CMT
-	select SYS_SUPPORTS_MTU2
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_MTU2
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PINCTRL
 
 config CPU_SUBTYPE_SH7206
 	bool "Support SH7206 processor"
 	select CPU_SH2A
-	select SYS_SUPPORTS_CMT
-	select SYS_SUPPORTS_MTU2
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_MTU2
 
 config CPU_SUBTYPE_SH7263
 	bool "Support SH7263 processor"
 	select CPU_SH2A
 	select CPU_HAS_FPU
-	select SYS_SUPPORTS_CMT
-	select SYS_SUPPORTS_MTU2
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_MTU2
 
 config CPU_SUBTYPE_SH7264
 	bool "Support SH7264 processor"
 	select CPU_SH2A
 	select CPU_HAS_FPU
-	select SYS_SUPPORTS_CMT
-	select SYS_SUPPORTS_MTU2
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_MTU2
 	select PINCTRL
 
 config CPU_SUBTYPE_SH7269
 	bool "Support SH7269 processor"
 	select CPU_SH2A
 	select CPU_HAS_FPU
-	select SYS_SUPPORTS_CMT
-	select SYS_SUPPORTS_MTU2
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_MTU2
 	select PINCTRL
 
 config CPU_SUBTYPE_MXG
 	bool "Support MX-G processor"
 	select CPU_SH2A
-	select SYS_SUPPORTS_MTU2
+	select SYS_SUPPORTS_SH_MTU2
 	help
 	  Select MX-G if running on an R8A03022BG part.
 
@@ -354,7 +345,7 @@ config CPU_SUBTYPE_SH7720
 	bool "Support SH7720 processor"
 	select CPU_SH3
 	select CPU_HAS_DSP
-	select SYS_SUPPORTS_CMT
+	select SYS_SUPPORTS_SH_CMT
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select USB_ARCH_HAS_OHCI
 	select USB_OHCI_SH if USB_OHCI_HCD
@@ -366,7 +357,7 @@ config CPU_SUBTYPE_SH7721
 	bool "Support SH7721 processor"
 	select CPU_SH3
 	select CPU_HAS_DSP
-	select SYS_SUPPORTS_CMT
+	select SYS_SUPPORTS_SH_CMT
 	select USB_ARCH_HAS_OHCI
 	select USB_OHCI_SH if USB_OHCI_HCD
 	help
@@ -422,7 +413,7 @@ config CPU_SUBTYPE_SH7723
 	select CPU_SHX2
 	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
-	select SYS_SUPPORTS_CMT
+	select SYS_SUPPORTS_SH_CMT
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PINCTRL
 	help
@@ -434,7 +425,7 @@ config CPU_SUBTYPE_SH7724
 	select CPU_SHX2
 	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
-	select SYS_SUPPORTS_CMT
+	select SYS_SUPPORTS_SH_CMT
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PINCTRL
 	help
@@ -514,7 +505,7 @@ config CPU_SUBTYPE_SH7343
 	bool "Support SH7343 processor"
 	select CPU_SH4AL_DSP
 	select ARCH_SHMOBILE
-	select SYS_SUPPORTS_CMT
+	select SYS_SUPPORTS_SH_CMT
 
 config CPU_SUBTYPE_SH7722
 	bool "Support SH7722 processor"
@@ -523,7 +514,7 @@ config CPU_SUBTYPE_SH7722
 	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
-	select SYS_SUPPORTS_CMT
+	select SYS_SUPPORTS_SH_CMT
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PINCTRL
 
@@ -534,7 +525,7 @@ config CPU_SUBTYPE_SH7366
 	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
-	select SYS_SUPPORTS_CMT
+	select SYS_SUPPORTS_SH_CMT
 
 endchoice
 
@@ -567,27 +558,6 @@ source "arch/sh/boards/Kconfig"
 
 menu "Timer and clock configuration"
 
-config SH_TIMER_TMU
-	bool "TMU timer driver"
-	depends on SYS_SUPPORTS_TMU
-	default y
-	help
-	  This enables the build of the TMU timer driver.
-
-config SH_TIMER_CMT
-	bool "CMT timer driver"
-	depends on SYS_SUPPORTS_CMT
-	default y
-	help
-	  This enables build of the CMT timer driver.
-
-config SH_TIMER_MTU2
-	bool "MTU2 timer driver"
-	depends on SYS_SUPPORTS_MTU2
-	default y
-	help
-	  This enables build of the MTU2 timer driver.
-
 config SH_PCLK_FREQ
 	int "Peripheral clock frequency (in Hz)"
 	depends on SH_CLK_CPG_LEGACY

arch/x86/kernel/hpet.c

View file

diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index da85a8e..b91abfd 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -699,7 +699,7 @@ static int hpet_cpuhp_notify(struct notifier_block *n,
 		/* FIXME: add schedule_work_on() */
 		schedule_delayed_work_on(cpu, &work.work, 0);
 		wait_for_completion(&work.complete);
-		destroy_timer_on_stack(&work.work.timer);
+		destroy_delayed_work_on_stack(&work.work);
 		break;
 	case CPU_DEAD:
 		if (hdev) {

drivers/clocksource/Kconfig

View file

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index cd6950f..52e9329 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -140,3 +140,51 @@ config VF_PIT_TIMER
 	bool
 	help
 	  Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
+
+config SYS_SUPPORTS_SH_CMT
+        bool
+
+config SYS_SUPPORTS_SH_MTU2
+        bool
+
+config SYS_SUPPORTS_SH_TMU
+        bool
+
+config SYS_SUPPORTS_EM_STI
+        bool
+
+config SH_TIMER_CMT
+	bool "Renesas CMT timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	default SYS_SUPPORTS_SH_CMT
+	help
+	  This enables build of a clocksource and clockevent driver for
+	  the Compare Match Timer (CMT) hardware available in 16/32/48-bit
+	  variants on a wide range of Mobile and Automotive SoCs from Renesas.
+
+config SH_TIMER_MTU2
+	bool "Renesas MTU2 timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	default SYS_SUPPORTS_SH_MTU2
+	help
+	  This enables build of a clockevent driver for the Multi-Function
+	  Timer Pulse Unit 2 (TMU2) hardware available on SoCs from Renesas.