Merge branch 'for-4.6/drivers' of git://git.kernel.dk/linux-block
Merge commit. Changes below are compared with the first parent: 35d88d97.
Changes
26 files changed · +794 −3011
Only the first 600 diff lines are shown. Download the complete patch.
Documentation/blockdev/cpqarray.txt
View before deletiondiff --git a/Documentation/blockdev/cpqarray.txt b/Documentation/blockdev/cpqarray.txt
deleted file mode 100644
index c7154e2..0000000
--- a/Documentation/blockdev/cpqarray.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-This driver is for Compaq's SMART2 Intelligent Disk Array Controllers.
-
-Supported Cards:
-----------------
-
-This driver is known to work with the following cards:
-
- * SMART (EISA)
- * SMART-2/E (EISA)
- * SMART-2/P
- * SMART-2DH
- * SMART-2SL
- * SMART-221
- * SMART-3100ES
- * SMART-3200
- * Integrated Smart Array Controller
- * SA 4200
- * SA 4250ES
- * SA 431
- * RAID LC2 Controller
-
-It should also work with some really old Disk array adapters, but I am
-unable to test against these cards:
-
- * IDA
- * IDA-2
- * IAES
-
-
-EISA Controllers:
------------------
-
-If you want to use an EISA controller you'll have to supply some
-modprobe/lilo parameters. If the driver is compiled into the kernel, must
-give it the controller's IO port address at boot time (it is not
-necessary to specify the IRQ). For example, if you had two SMART-2/E
-controllers, in EISA slots 1 and 2 you'd give it a boot argument like
-this:
-
- smart2=0x1000,0x2000
-
-If you were loading the driver as a module, you'd give load it like this:
-
- modprobe cpqarray eisa=0x1000,0x2000
-
-You can use EISA and PCI adapters at the same time.
-
-
-Device Naming:
---------------
-
-You need some entries in /dev for the ida device. MAKEDEV in the /dev
-directory can make device nodes for you automatically. The device setup is
-as follows:
-
-Major numbers:
- 72 ida0
- 73 ida1
- 74 ida2
- 75 ida3
- 76 ida4
- 77 ida5
- 78 ida6
- 79 ida7
-
-Minor numbers:
- b7 b6 b5 b4 b3 b2 b1 b0
- |----+----| |----+----|
- | |
- | +-------- Partition ID (0=wholedev, 1-15 partition)
- |
- +-------------------- Logical Volume number
-
-The device naming scheme is:
-/dev/ida/c0d0 Controller 0, disk 0, whole device
-/dev/ida/c0d0p1 Controller 0, disk 0, partition 1
-/dev/ida/c0d0p2 Controller 0, disk 0, partition 2
-/dev/ida/c0d0p3 Controller 0, disk 0, partition 3
-
-/dev/ida/c1d1 Controller 1, disk 1, whole device
-/dev/ida/c1d1p1 Controller 1, disk 1, partition 1
-/dev/ida/c1d1p2 Controller 1, disk 1, partition 2
-/dev/ida/c1d1p3 Controller 1, disk 1, partition 3
-
-
-Changelog:
-==========
-
-10-28-2004 : General cleanup, syntax fixes for in-kernel driver version.
- James Nelson <[email protected]>
-
-
-1999 : Original Document
MAINTAINERS
View filediff --git a/MAINTAINERS b/MAINTAINERS
index 15b4c41..1c6d778 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5016,12 +5016,6 @@ T: git git://linuxtv.org/anttip/media_tree.git
S: Maintained
F: drivers/media/dvb-frontends/hd29l2*
-HEWLETT-PACKARD SMART2 RAID DRIVER
-S: Orphan
-F: Documentation/blockdev/cpqarray.txt
-F: drivers/block/cpqarray.*
-
HEWLETT-PACKARD SMART ARRAY RAID DRIVER (hpsa)
M: Don Brace <[email protected]>
@@ -5034,9 +5028,9 @@ F: include/linux/cciss*.h
F: include/uapi/linux/cciss*.h
HEWLETT-PACKARD SMART CISS RAID DRIVER (cciss)
-M: Don Brace <[email protected]>
+M: Don Brace <[email protected]>
S: Supported
F: Documentation/blockdev/cciss.txt
drivers/block/Kconfig
View filediff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 29819e7..39dd30b 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -110,16 +110,6 @@ source "drivers/block/mtip32xx/Kconfig"
source "drivers/block/zram/Kconfig"
-config BLK_CPQ_DA
- tristate "Compaq SMART2 support"
- depends on PCI && VIRT_TO_BUS && 0
- help
- This is the driver for Compaq Smart Array controllers. Everyone
- using these boards should say Y here. See the file
- <file:Documentation/blockdev/cpqarray.txt> for the current list of
- boards supported by this driver, and for further information on the
- use of this driver.
-
config BLK_CPQ_CISS_DA
tristate "Compaq Smart Array 5xxx support"
depends on PCI
drivers/block/Makefile
View filediff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 6713290..1e9661e 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o
obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o
obj-$(CONFIG_BLK_DEV_RAM) += brd.o
obj-$(CONFIG_BLK_DEV_LOOP) += loop.o
-obj-$(CONFIG_BLK_CPQ_DA) += cpqarray.o
obj-$(CONFIG_BLK_CPQ_CISS_DA) += cciss.o
obj-$(CONFIG_BLK_DEV_DAC960) += DAC960.o
obj-$(CONFIG_XILINX_SYSACE) += xsysace.o
drivers/block/brd.c
View filediff --git a/drivers/block/brd.c b/drivers/block/brd.c
index cb27190..f7ecc28 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -341,7 +341,7 @@ static blk_qc_t brd_make_request(struct request_queue *q, struct bio *bio)
if (unlikely(bio->bi_rw & REQ_DISCARD)) {
if (sector & ((PAGE_SIZE >> SECTOR_SHIFT) - 1) ||
- bio->bi_iter.bi_size & PAGE_MASK)
+ bio->bi_iter.bi_size & ~PAGE_MASK)
goto io_error;
discard_from_brd(brd, sector, bio->bi_iter.bi_size);
goto out;
drivers/block/cpqarray.c
View before deletiondiff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
deleted file mode 100644
index f749df9..0000000
--- a/drivers/block/cpqarray.c
+++ /dev/null
@@ -1,1820 +0,0 @@
-/*
- * Disk Array driver for Compaq SMART2 Controllers
- * Copyright 1998 Compaq Computer Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Questions/Comments/Bugfixes to [email protected]
- *
- */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/bio.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/blkpg.h>
-#include <linux/timer.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/init.h>
-#include <linux/hdreg.h>
-#include <linux/mutex.h>
-#include <linux/spinlock.h>
-#include <linux/blkdev.h>
-#include <linux/genhd.h>
-#include <linux/scatterlist.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-
-
-#define SMART2_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
-
-#define DRIVER_NAME "Compaq SMART2 Driver (v 2.6.0)"
-#define DRIVER_VERSION SMART2_DRIVER_VERSION(2,6,0)
-
-/* Embedded module documentation macros - see modules.h */
-/* Original author Chris Frantz - Compaq Computer Corporation */
-MODULE_AUTHOR("Compaq Computer Corporation");
-MODULE_DESCRIPTION("Driver for Compaq Smart2 Array Controllers version 2.6.0");
-MODULE_LICENSE("GPL");
-
-#include "cpqarray.h"
-#include "ida_cmd.h"
-#include "smart1,2.h"
-#include "ida_ioctl.h"
-
-#define READ_AHEAD 128
-#define NR_CMDS 128 /* This could probably go as high as ~400 */
-
-#define MAX_CTLR 8
-#define CTLR_SHIFT 8
-
-#define CPQARRAY_DMA_MASK 0xFFFFFFFF /* 32 bit DMA */
-
-static DEFINE_MUTEX(cpqarray_mutex);
-static int nr_ctlr;
-static ctlr_info_t *hba[MAX_CTLR];
-
-static int eisa[8];
-
-#define NR_PRODUCTS ARRAY_SIZE(products)
-
-/* board_id = Subsystem Device ID & Vendor ID
- * product = Marketing Name for the board
- * access = Address of the struct of function pointers
- */
-static struct board_type products[] = {
- { 0x0040110E, "IDA", &smart1_access },
- { 0x0140110E, "IDA-2", &smart1_access },
- { 0x1040110E, "IAES", &smart1_access },
- { 0x2040110E, "SMART", &smart1_access },
- { 0x3040110E, "SMART-2/E", &smart2e_access },
- { 0x40300E11, "SMART-2/P", &smart2_access },
- { 0x40310E11, "SMART-2SL", &smart2_access },
- { 0x40320E11, "Smart Array 3200", &smart2_access },
- { 0x40330E11, "Smart Array 3100ES", &smart2_access },
- { 0x40340E11, "Smart Array 221", &smart2_access },
- { 0x40400E11, "Integrated Array", &smart4_access },
- { 0x40480E11, "Compaq Raid LC2", &smart4_access },
- { 0x40500E11, "Smart Array 4200", &smart4_access },
- { 0x40510E11, "Smart Array 4250ES", &smart4_access },
- { 0x40580E11, "Smart Array 431", &smart4_access },
-};
-
-/* define the PCI info for the PCI cards this driver can control */
-static const struct pci_device_id cpqarray_pci_device_id[] =
-{
- { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_COMPAQ_42XX,
- 0x0E11, 0x4058, 0, 0, 0}, /* SA431 */
- { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_COMPAQ_42XX,
- 0x0E11, 0x4051, 0, 0, 0}, /* SA4250ES */
- { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_COMPAQ_42XX,
- 0x0E11, 0x4050, 0, 0, 0}, /* SA4200 */
- { PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C1510,
- 0x0E11, 0x4048, 0, 0, 0}, /* LC2 */
- { PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C1510,
- 0x0E11, 0x4040, 0, 0, 0}, /* Integrated Array */
- { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_SMART2P,
- 0x0E11, 0x4034, 0, 0, 0}, /* SA 221 */
- { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_SMART2P,
- 0x0E11, 0x4033, 0, 0, 0}, /* SA 3100ES*/
- { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_SMART2P,
- 0x0E11, 0x4032, 0, 0, 0}, /* SA 3200*/
- { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_SMART2P,
- 0x0E11, 0x4031, 0, 0, 0}, /* SA 2SL*/
- { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_SMART2P,
- 0x0E11, 0x4030, 0, 0, 0}, /* SA 2P */
- { 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, cpqarray_pci_device_id);
-
-static struct gendisk *ida_gendisk[MAX_CTLR][NWD];
-
-/* Debug... */
-#define DBG(s) do { s } while(0)
-/* Debug (general info)... */
-#define DBGINFO(s) do { } while(0)
-/* Debug Paranoid... */
-#define DBGP(s) do { } while(0)
-/* Debug Extra Paranoid... */
-#define DBGPX(s) do { } while(0)
-
-static int cpqarray_pci_init(ctlr_info_t *c, struct pci_dev *pdev);
-static void __iomem *remap_pci_mem(ulong base, ulong size);
-static int cpqarray_eisa_detect(void);
-static int pollcomplete(int ctlr);
-static void getgeometry(int ctlr);
-static void start_fwbk(int ctlr);
-
-static cmdlist_t * cmd_alloc(ctlr_info_t *h, int get_from_pool);
-static void cmd_free(ctlr_info_t *h, cmdlist_t *c, int got_from_pool);
-
-static void free_hba(int i);
-static int alloc_cpqarray_hba(void);
-
-static int sendcmd(
- __u8 cmd,
- int ctlr,
- void *buff,
- size_t size,
- unsigned int blk,
- unsigned int blkcnt,
- unsigned int log_unit );
-
-static int ida_unlocked_open(struct block_device *bdev, fmode_t mode);
-static void ida_release(struct gendisk *disk, fmode_t mode);
-static int ida_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg);
-static int ida_getgeo(struct block_device *bdev, struct hd_geometry *geo);
-static int ida_ctlr_ioctl(ctlr_info_t *h, int dsk, ida_ioctl_t *io);
-
-static void do_ida_request(struct request_queue *q);
-static void start_io(ctlr_info_t *h);
-
-static inline void addQ(cmdlist_t **Qptr, cmdlist_t *c);
-static inline cmdlist_t *removeQ(cmdlist_t **Qptr, cmdlist_t *c);
-static inline void complete_command(cmdlist_t *cmd, int timeout);
-
-static irqreturn_t do_ida_intr(int irq, void *dev_id);
-static void ida_timer(unsigned long tdata);
-static int ida_revalidate(struct gendisk *disk);
-static int revalidate_allvol(ctlr_info_t *host);
-static int cpqarray_register_ctlr(int ctlr, struct pci_dev *pdev);
-
-#ifdef CONFIG_PROC_FS
-static void ida_procinit(int i);
-#else
-static void ida_procinit(int i) {}
-#endif
-
-static inline drv_info_t *get_drv(struct gendisk *disk)
-{
- return disk->private_data;
-}
-
-static inline ctlr_info_t *get_host(struct gendisk *disk)
-{
- return disk->queue->queuedata;
-}
-
-
-static const struct block_device_operations ida_fops = {
- .owner = THIS_MODULE,
- .open = ida_unlocked_open,
- .release = ida_release,
- .ioctl = ida_ioctl,
- .getgeo = ida_getgeo,
- .revalidate_disk= ida_revalidate,
-};
-
-
-#ifdef CONFIG_PROC_FS
-
-static struct proc_dir_entry *proc_array;
-static const struct file_operations ida_proc_fops;
-
-/*
- * Get us a file in /proc/array that says something about each controller.
- * Create /proc/array if it doesn't exist yet.
- */
-static void __init ida_procinit(int i)
-{
- if (proc_array == NULL) {
- proc_array = proc_mkdir("driver/cpqarray", NULL);
- if (!proc_array) return;
- }
-
- proc_create_data(hba[i]->devname, 0, proc_array, &ida_proc_fops, hba[i]);
-}
-
-/*
- * Report information about this controller.
- */
-static int ida_proc_show(struct seq_file *m, void *v)
-{
- int i, ctlr;
- ctlr_info_t *h = (ctlr_info_t*)m->private;
- drv_info_t *drv;
-#ifdef CPQ_PROC_PRINT_QUEUES
- cmdlist_t *c;
- unsigned long flags;
-#endif
-
- ctlr = h->ctlr;
- seq_printf(m, "%s: Compaq %s Controller\n"
- " Board ID: 0x%08lx\n"
- " Firmware Revision: %c%c%c%c\n"
- " Controller Sig: 0x%08lx\n"
- " Memory Address: 0x%08lx\n"
- " I/O Port: 0x%04x\n"
- " IRQ: %d\n"
- " Logical drives: %d\n"
- " Physical drives: %d\n\n"
- " Current Q depth: %d\n"
- " Max Q depth since init: %d\n\n",
- h->devname,
- h->product_name,
- (unsigned long)h->board_id,
- h->firm_rev[0], h->firm_rev[1], h->firm_rev[2], h->firm_rev[3],
- (unsigned long)h->ctlr_sig, (unsigned long)h->vaddr,
- (unsigned int) h->io_mem_addr, (unsigned int)h->intr,
- h->log_drives, h->phys_drives,
- h->Qdepth, h->maxQsinceinit);
-
- seq_puts(m, "Logical Drive Info:\n");
-
- for(i=0; i<h->log_drives; i++) {
- drv = &h->drv[i];
- seq_printf(m, "ida/c%dd%d: blksz=%d nr_blks=%d\n",
- ctlr, i, drv->blk_size, drv->nr_blks);
- }
-
-#ifdef CPQ_PROC_PRINT_QUEUES
- spin_lock_irqsave(IDA_LOCK(h->ctlr), flags);
- seq_puts(m, "\nCurrent Queues:\n");
-
- c = h->reqQ;
- seq_printf(m, "reqQ = %p", c);
- if (c) c=c->next;
- while(c && c != h->reqQ) {
- seq_printf(m, "->%p", c);
- c=c->next;
- }
-
- c = h->cmpQ;
- seq_printf(m, "\ncmpQ = %p", c);
- if (c) c=c->next;
- while(c && c != h->cmpQ) {
- seq_printf(m, "->%p", c);
- c=c->next;
- }
-
- seq_putc(m, '\n');
- spin_unlock_irqrestore(IDA_LOCK(h->ctlr), flags);
-#endif
- seq_printf(m, "nr_allocs = %d\nnr_frees = %d\n",
- h->nr_allocs, h->nr_frees);
- return 0;
-}
-
-static int ida_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ida_proc_show, PDE_DATA(inode));
-}
-
-static const struct file_operations ida_proc_fops = {
- .owner = THIS_MODULE,
- .open = ida_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-#endif /* CONFIG_PROC_FS */
-
-module_param_array(eisa, int, NULL, 0);
-
-static void release_io_mem(ctlr_info_t *c)
-{
- /* if IO mem was not protected do nothing */
- if( c->io_mem_addr == 0)
- return;
- release_region(c->io_mem_addr, c->io_mem_length);
- c->io_mem_addr = 0;
- c->io_mem_length = 0;
-}
-
-static void cpqarray_remove_one(int i)
-{
- int j;
- char buff[4];
-
- /* sendcmd will turn off interrupt, and send the flush...
- * To write all data in the battery backed cache to disks
- * no data returned, but don't want to send NULL to sendcmd */
- if( sendcmd(FLUSH_CACHE, i, buff, 4, 0, 0, 0))
- {
- printk(KERN_WARNING "Unable to flush cache on controller %d\n",
- i);
- }
- free_irq(hba[i]->intr, hba[i]);
- iounmap(hba[i]->vaddr);
- unregister_blkdev(COMPAQ_SMART2_MAJOR+i, hba[i]->devname);
- del_timer(&hba[i]->timer);
- remove_proc_entry(hba[i]->devname, proc_array);
- pci_free_consistent(hba[i]->pci_dev,
- NR_CMDS * sizeof(cmdlist_t), (hba[i]->cmd_pool),
- hba[i]->cmd_pool_dhandle);
- kfree(hba[i]->cmd_pool_bits);
- for(j = 0; j < NWD; j++) {
- if (ida_gendisk[i][j]->flags & GENHD_FL_UP)
- del_gendisk(ida_gendisk[i][j]);
- put_disk(ida_gendisk[i][j]);
- }
- blk_cleanup_queue(hba[i]->queue);
- release_io_mem(hba[i]);
- free_hba(i);
-}
-
-static void cpqarray_remove_one_pci(struct pci_dev *pdev)
-{
- int i;
- ctlr_info_t *tmp_ptr;
-
- if (pci_get_drvdata(pdev) == NULL) {
- printk( KERN_ERR "cpqarray: Unable to remove device \n");
- return;
- }
-
- tmp_ptr = pci_get_drvdata(pdev);
- i = tmp_ptr->ctlr;
- if (hba[i] == NULL) {
- printk(KERN_ERR "cpqarray: controller %d appears to have"
- "already been removed \n", i);
- return;
- }
- pci_set_drvdata(pdev, NULL);
-
- cpqarray_remove_one(i);
-}
-
-/* removing an instance that was not removed automatically..
- * must be an eisa card.
- */
-static void cpqarray_remove_one_eisa(int i)
-{
- if (hba[i] == NULL) {
- printk(KERN_ERR "cpqarray: controller %d appears to have"
- "already been removed \n", i);
- return;
- }
- cpqarray_remove_one(i);
-}
-
-/* pdev is NULL for eisa */
-static int cpqarray_register_ctlr(int i, struct pci_dev *pdev)
-{
- struct request_queue *q;
- int j;
-
- /*
- * register block devices
- * Find disks and fill in structs
- * Get an interrupt, set the Q depth and get into /proc
- */
-
- /* If this successful it should insure that we are the only */
- /* instance of the driver */
- if (register_blkdev(COMPAQ_SMART2_MAJOR+i, hba[i]->devname)) {
- goto Enomem4;
- }
- hba[i]->access.set_intr_mask(hba[i], 0);
- if (request_irq(hba[i]->intr, do_ida_intr, IRQF_SHARED,
- hba[i]->devname, hba[i]))
- {
- printk(KERN_ERR "cpqarray: Unable to get irq %d for %s\n",
- hba[i]->intr, hba[i]->devname);
- goto Enomem3;
- }
-
- for (j=0; j<NWD; j++) {
- ida_gendisk[i][j] = alloc_disk(1 << NWD_SHIFT);
- if (!ida_gendisk[i][j])
- goto Enomem2;
- }
This diff is incomplete. Download the complete patch.
drivers/block/cpqarray.h
View before deletionThis diff is incomplete. Download the complete patch.
drivers/block/ida_cmd.h
View before deletionThis diff is incomplete. Download the complete patch.
drivers/block/ida_ioctl.h
View before deletionThis diff is incomplete. Download the complete patch.
drivers/block/mtip32xx/mtip32xx.c
View fileThis diff is incomplete. Download the complete patch.
drivers/block/mtip32xx/mtip32xx.h
View fileThis diff is incomplete. Download the complete patch.
drivers/block/nbd.c
View fileThis diff is incomplete. Download the complete patch.
drivers/block/xen-blkback/xenbus.c
View fileThis diff is incomplete. Download the complete patch.
drivers/block/xen-blkfront.c
View fileThis diff is incomplete. Download the complete patch.
drivers/lightnvm/core.c
View fileThis diff is incomplete. Download the complete patch.
drivers/lightnvm/gennvm.c
View fileThis diff is incomplete. Download the complete patch.
drivers/lightnvm/rrpc.c
View fileThis diff is incomplete. Download the complete patch.
drivers/lightnvm/rrpc.h
View fileThis diff is incomplete. Download the complete patch.
drivers/md/bcache/super.c
View fileThis diff is incomplete. Download the complete patch.
drivers/nvme/host/Kconfig
View fileThis diff is incomplete. Download the complete patch.
drivers/nvme/host/Makefile
View fileThis diff is incomplete. Download the complete patch.
drivers/nvme/host/core.c
View fileThis diff is incomplete. Download the complete patch.
drivers/nvme/host/lightnvm.c
View fileThis diff is incomplete. Download the complete patch.
drivers/nvme/host/nvme.h
View fileThis diff is incomplete. Download the complete patch.
drivers/nvme/host/pci.c
View fileThis diff is incomplete. Download the complete patch.
include/linux/lightnvm.h
View fileThis diff is incomplete. Download the complete patch.