Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Merge commit. Changes below are compared with the first parent: 314489bd.
Changes
38 files changed · +602 −376
Only the first 600 diff lines are shown. Download the complete patch.
Documentation/networking/driver.txt
View filediff --git a/Documentation/networking/driver.txt b/Documentation/networking/driver.txt
index 03283da..da59e28 100644
--- a/Documentation/networking/driver.txt
+++ b/Documentation/networking/driver.txt
@@ -2,16 +2,16 @@ Document about softnet driver issues
Transmit path guidelines:
-1) The hard_start_xmit method must never return '1' under any
- normal circumstances. It is considered a hard error unless
+1) The ndo_start_xmit method must not return NETDEV_TX_BUSY under
+ any normal circumstances. It is considered a hard error unless
there is no way your device can tell ahead of time when it's
transmit function will become busy.
Instead it must maintain the queue properly. For example,
for a driver implementing scatter-gather this means:
- static int drv_hard_start_xmit(struct sk_buff *skb,
- struct net_device *dev)
+ static netdev_tx_t drv_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct drv *dp = netdev_priv(dev);
@@ -23,7 +23,7 @@ Transmit path guidelines:
unlock_tx(dp);
printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
dev->name);
- return 1;
+ return NETDEV_TX_BUSY;
}
... queue packet to card ...
@@ -35,6 +35,7 @@ Transmit path guidelines:
...
unlock_tx(dp);
...
+ return NETDEV_TX_OK;
}
And then at the end of your TX reclamation event handling:
@@ -58,15 +59,12 @@ Transmit path guidelines:
TX_BUFFS_AVAIL(dp) > 0)
netif_wake_queue(dp->dev);
-2) Do not forget to update netdev->trans_start to jiffies after
- each new tx packet is given to the hardware.
-
-3) A hard_start_xmit method must not modify the shared parts of a
+2) An ndo_start_xmit method must not modify the shared parts of a
cloned SKB.
-4) Do not forget that once you return 0 from your hard_start_xmit
- method, it is your driver's responsibility to free up the SKB
- and in some finite amount of time.
+3) Do not forget that once you return NETDEV_TX_OK from your
+ ndo_start_xmit method, it is your driver's responsibility to free
+ up the SKB and in some finite amount of time.
For example, this means that it is not allowed for your TX
mitigation scheme to let TX packets "hang out" in the TX
@@ -74,8 +72,9 @@ Transmit path guidelines:
This error can deadlock sockets waiting for send buffer room
to be freed up.
- If you return 1 from the hard_start_xmit method, you must not keep
- any reference to that SKB and you must not attempt to free it up.
+ If you return NETDEV_TX_BUSY from the ndo_start_xmit method, you
+ must not keep any reference to that SKB and you must not attempt
+ to free it up.
Probing guidelines:
@@ -85,10 +84,10 @@ Probing guidelines:
Close/stop guidelines:
-1) After the dev->stop routine has been called, the hardware must
+1) After the ndo_stop routine has been called, the hardware must
not receive or transmit any data. All in flight packets must
be aborted. If necessary, poll or wait for completion of
any reset commands.
-2) The dev->stop routine will be called by unregister_netdevice
+2) The ndo_stop routine will be called by unregister_netdevice
if device is still UP.
Documentation/networking/ip-sysctl.txt
View filediff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index ad3e80e..bd80ba5 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -604,15 +604,8 @@ IP Variables:
ip_local_port_range - 2 INTEGERS
Defines the local port range that is used by TCP and UDP to
choose the local port. The first number is the first, the
- second the last local port number. Default value depends on
- amount of memory available on the system:
- > 128Mb 32768-61000
- < 128Mb 1024-4999 or even less.
- This number defines number of active connections, which this
- system can issue simultaneously to systems not supporting
- TCP extensions (timestamps). With tcp_tw_recycle enabled
- (i.e. by default) range 1024-4999 is enough to issue up to
- 2000 connections per second to systems supporting timestamps.
+ second the last local port number. The default values are
+ 32768 and 61000 respectively.
ip_local_reserved_ports - list of comma separated ranges
Specify the ports which are reserved for known third-party
Documentation/networking/netdevices.txt
View filediff --git a/Documentation/networking/netdevices.txt b/Documentation/networking/netdevices.txt
index 8935834..c7ecc70 100644
--- a/Documentation/networking/netdevices.txt
+++ b/Documentation/networking/netdevices.txt
@@ -47,26 +47,25 @@ packets is preferred.
struct net_device synchronization rules
=======================================
-dev->open:
+ndo_open:
Synchronization: rtnl_lock() semaphore.
Context: process
-dev->stop:
+ndo_stop:
Synchronization: rtnl_lock() semaphore.
Context: process
- Note1: netif_running() is guaranteed false
- Note2: dev->poll() is guaranteed to be stopped
+ Note: netif_running() is guaranteed false
-dev->do_ioctl:
+ndo_do_ioctl:
Synchronization: rtnl_lock() semaphore.
Context: process
-dev->get_stats:
+ndo_get_stats:
Synchronization: dev_base_lock rwlock.
Context: nominally process, but don't sleep inside an rwlock
-dev->hard_start_xmit:
- Synchronization: netif_tx_lock spinlock.
+ndo_start_xmit:
+ Synchronization: __netif_tx_lock spinlock.
When the driver sets NETIF_F_LLTX in dev->features this will be
called without holding netif_tx_lock. In this case the driver
@@ -87,20 +86,20 @@ dev->hard_start_xmit:
o NETDEV_TX_LOCKED Locking failed, please retry quickly.
Only valid when NETIF_F_LLTX is set.
-dev->tx_timeout:
- Synchronization: netif_tx_lock spinlock.
+ndo_tx_timeout:
+ Synchronization: netif_tx_lock spinlock; all TX queues frozen.
Context: BHs disabled
Notes: netif_queue_stopped() is guaranteed true
-dev->set_rx_mode:
- Synchronization: netif_tx_lock spinlock.
+ndo_set_rx_mode:
+ Synchronization: netif_addr_lock spinlock.
Context: BHs disabled
struct napi_struct synchronization rules
========================================
napi->poll:
Synchronization: NAPI_STATE_SCHED bit in napi->state. Device
- driver's dev->close method will invoke napi_disable() on
+ driver's ndo_stop method will invoke napi_disable() on
all NAPI instances which will do a sleeping poll on the
NAPI_STATE_SCHED napi->state bit, waiting for all pending
NAPI activity to cease.
MAINTAINERS
View filediff --git a/MAINTAINERS b/MAINTAINERS
index 3e25ba8..6d05ae2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4309,6 +4309,13 @@ W: http://www.kernel.org/doc/man-pages
S: Maintained
+MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
+M: Mirko Lindner <[email protected]>
+M: Stephen Hemminger <[email protected]>
+S: Maintained
+F: drivers/net/ethernet/marvell/sk*
+
MARVELL LIBERTAS WIRELESS DRIVER
M: Dan Williams <[email protected]>
@@ -4339,12 +4346,6 @@ M: Nicolas Pitre <[email protected]>
S: Odd Fixes
F: drivers/mmc/host/mvsdio.*
-MARVELL YUKON / SYSKONNECT DRIVER
-M: Mirko Lindner <[email protected]>
-M: Ralph Roesler <[email protected]>
-W: http://www.syskonnect.com
-S: Supported
-
MATROX FRAMEBUFFER DRIVER
S: Orphan
@@ -6116,12 +6117,6 @@ W: http://www.winischhofer.at/linuxsisusbvga.shtml
S: Maintained
F: drivers/usb/misc/sisusbvga/
-SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
-M: Stephen Hemminger <[email protected]>
-S: Maintained
-F: drivers/net/ethernet/marvell/sk*
-
SLAB ALLOCATOR
M: Christoph Lameter <[email protected]>
M: Pekka Enberg <[email protected]>
arch/x86/net/bpf_jit.S
View filediff --git a/arch/x86/net/bpf_jit.S b/arch/x86/net/bpf_jit.S
index 6687022..877b9a1 100644
--- a/arch/x86/net/bpf_jit.S
+++ b/arch/x86/net/bpf_jit.S
@@ -18,17 +18,17 @@
* r9d : hlen = skb->len - skb->data_len
*/
#define SKBDATA %r8
-
-sk_load_word_ind:
- .globl sk_load_word_ind
-
- add %ebx,%esi /* offset += X */
-# test %esi,%esi /* if (offset < 0) goto bpf_error; */
- js bpf_error
+#define SKF_MAX_NEG_OFF $(-0x200000) /* SKF_LL_OFF from filter.h */
sk_load_word:
.globl sk_load_word
+ test %esi,%esi
+ js bpf_slow_path_word_neg
+
+sk_load_word_positive_offset:
+ .globl sk_load_word_positive_offset
+
mov %r9d,%eax # hlen
sub %esi,%eax # hlen - offset
cmp $3,%eax
@@ -37,16 +37,15 @@ sk_load_word:
bswap %eax /* ntohl() */
ret
-
-sk_load_half_ind:
- .globl sk_load_half_ind
-
- add %ebx,%esi /* offset += X */
- js bpf_error
-
sk_load_half:
.globl sk_load_half
+ test %esi,%esi
+ js bpf_slow_path_half_neg
+
+sk_load_half_positive_offset:
+ .globl sk_load_half_positive_offset
+
mov %r9d,%eax
sub %esi,%eax # hlen - offset
cmp $1,%eax
@@ -55,14 +54,15 @@ sk_load_half:
rol $8,%ax # ntohs()
ret
-sk_load_byte_ind:
- .globl sk_load_byte_ind
- add %ebx,%esi /* offset += X */
- js bpf_error
-
sk_load_byte:
.globl sk_load_byte
+ test %esi,%esi
+ js bpf_slow_path_byte_neg
+
+sk_load_byte_positive_offset:
+ .globl sk_load_byte_positive_offset
+
cmp %esi,%r9d /* if (offset >= hlen) goto bpf_slow_path_byte */
jle bpf_slow_path_byte
movzbl (SKBDATA,%rsi),%eax
@@ -73,25 +73,21 @@ sk_load_byte:
*
* Implements BPF_S_LDX_B_MSH : ldxb 4*([offset]&0xf)
* Must preserve A accumulator (%eax)
- * Inputs : %esi is the offset value, already known positive
+ * Inputs : %esi is the offset value
*/
-ENTRY(sk_load_byte_msh)
- CFI_STARTPROC
+sk_load_byte_msh:
+ .globl sk_load_byte_msh
+ test %esi,%esi
+ js bpf_slow_path_byte_msh_neg
+
+sk_load_byte_msh_positive_offset:
+ .globl sk_load_byte_msh_positive_offset
cmp %esi,%r9d /* if (offset >= hlen) goto bpf_slow_path_byte_msh */
jle bpf_slow_path_byte_msh
movzbl (SKBDATA,%rsi),%ebx
and $15,%bl
shl $2,%bl
ret
- CFI_ENDPROC
-ENDPROC(sk_load_byte_msh)
-
-bpf_error:
-# force a return 0 from jit handler
- xor %eax,%eax
- mov -8(%rbp),%rbx
- leaveq
- ret
/* rsi contains offset and can be scratched */
#define bpf_slow_path_common(LEN) \
@@ -138,3 +134,67 @@ bpf_slow_path_byte_msh:
shl $2,%al
xchg %eax,%ebx
ret
+
+#define sk_negative_common(SIZE) \
+ push %rdi; /* save skb */ \
+ push %r9; \
+ push SKBDATA; \
+/* rsi already has offset */ \
+ mov $SIZE,%ecx; /* size */ \
+ call bpf_internal_load_pointer_neg_helper; \
+ test %rax,%rax; \
+ pop SKBDATA; \
+ pop %r9; \
+ pop %rdi; \
+ jz bpf_error
+
+
+bpf_slow_path_word_neg:
+ cmp SKF_MAX_NEG_OFF, %esi /* test range */
+ jl bpf_error /* offset lower -> error */
+sk_load_word_negative_offset:
+ .globl sk_load_word_negative_offset
+ sk_negative_common(4)
+ mov (%rax), %eax
+ bswap %eax
+ ret
+
+bpf_slow_path_half_neg:
+ cmp SKF_MAX_NEG_OFF, %esi
+ jl bpf_error
+sk_load_half_negative_offset:
+ .globl sk_load_half_negative_offset
+ sk_negative_common(2)
+ mov (%rax),%ax
+ rol $8,%ax
+ movzwl %ax,%eax
+ ret
+
+bpf_slow_path_byte_neg:
+ cmp SKF_MAX_NEG_OFF, %esi
+ jl bpf_error
+sk_load_byte_negative_offset:
+ .globl sk_load_byte_negative_offset
+ sk_negative_common(1)
+ movzbl (%rax), %eax
+ ret
+
+bpf_slow_path_byte_msh_neg:
+ cmp SKF_MAX_NEG_OFF, %esi
+ jl bpf_error
+sk_load_byte_msh_negative_offset:
+ .globl sk_load_byte_msh_negative_offset
+ xchg %eax,%ebx /* dont lose A , X is about to be scratched */
+ sk_negative_common(1)
+ movzbl (%rax),%eax
+ and $15,%al
+ shl $2,%al
+ xchg %eax,%ebx
+ ret
+
+bpf_error:
+# force a return 0 from jit handler
+ xor %eax,%eax
+ mov -8(%rbp),%rbx
+ leaveq
+ ret
arch/x86/net/bpf_jit_comp.c
View filediff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 5a5b6e4..0597f95 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -30,7 +30,10 @@ int bpf_jit_enable __read_mostly;
* assembly code in arch/x86/net/bpf_jit.S
*/
extern u8 sk_load_word[], sk_load_half[], sk_load_byte[], sk_load_byte_msh[];
-extern u8 sk_load_word_ind[], sk_load_half_ind[], sk_load_byte_ind[];
+extern u8 sk_load_word_positive_offset[], sk_load_half_positive_offset[];
+extern u8 sk_load_byte_positive_offset[], sk_load_byte_msh_positive_offset[];
+extern u8 sk_load_word_negative_offset[], sk_load_half_negative_offset[];
+extern u8 sk_load_byte_negative_offset[], sk_load_byte_msh_negative_offset[];
static inline u8 *emit_code(u8 *ptr, u32 bytes, unsigned int len)
{
@@ -117,6 +120,8 @@ static inline void bpf_flush_icache(void *start, void *end)
set_fs(old_fs);
}
+#define CHOOSE_LOAD_FUNC(K, func) \
+ ((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset)
void bpf_jit_compile(struct sk_filter *fp)
{
@@ -473,44 +478,46 @@ void bpf_jit_compile(struct sk_filter *fp)
#endif
break;
case BPF_S_LD_W_ABS:
- func = sk_load_word;
+ func = CHOOSE_LOAD_FUNC(K, sk_load_word);
common_load: seen |= SEEN_DATAREF;
- if ((int)K < 0) {
- /* Abort the JIT because __load_pointer() is needed. */
- goto out;
- }
t_offset = func - (image + addrs[i]);
EMIT1_off32(0xbe, K); /* mov imm32,%esi */
EMIT1_off32(0xe8, t_offset); /* call */
break;
case BPF_S_LD_H_ABS:
- func = sk_load_half;
+ func = CHOOSE_LOAD_FUNC(K, sk_load_half);
goto common_load;
case BPF_S_LD_B_ABS:
- func = sk_load_byte;
+ func = CHOOSE_LOAD_FUNC(K, sk_load_byte);
goto common_load;
case BPF_S_LDX_B_MSH:
- if ((int)K < 0) {
- /* Abort the JIT because __load_pointer() is needed. */
- goto out;
- }
+ func = CHOOSE_LOAD_FUNC(K, sk_load_byte_msh);
seen |= SEEN_DATAREF | SEEN_XREG;
- t_offset = sk_load_byte_msh - (image + addrs[i]);
+ t_offset = func - (image + addrs[i]);
EMIT1_off32(0xbe, K); /* mov imm32,%esi */
EMIT1_off32(0xe8, t_offset); /* call sk_load_byte_msh */
break;
case BPF_S_LD_W_IND:
- func = sk_load_word_ind;
+ func = sk_load_word;
common_load_ind: seen |= SEEN_DATAREF | SEEN_XREG;
t_offset = func - (image + addrs[i]);
- EMIT1_off32(0xbe, K); /* mov imm32,%esi */
+ if (K) {
+ if (is_imm8(K)) {
+ EMIT3(0x8d, 0x73, K); /* lea imm8(%rbx), %esi */
+ } else {
+ EMIT2(0x8d, 0xb3); /* lea imm32(%rbx),%esi */
+ EMIT(K, 4);
+ }
+ } else {
+ EMIT2(0x89,0xde); /* mov %ebx,%esi */
+ }
EMIT1_off32(0xe8, t_offset); /* call sk_load_xxx_ind */
break;
case BPF_S_LD_H_IND:
- func = sk_load_half_ind;
+ func = sk_load_half;
goto common_load_ind;
case BPF_S_LD_B_IND:
- func = sk_load_byte_ind;
+ func = sk_load_byte;
goto common_load_ind;
case BPF_S_JMP_JA:
t_offset = addrs[i + K] - addrs[i];
drivers/net/bonding/bond_main.c
View filediff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 941b4e1..62d2409 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2034,6 +2034,9 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
write_unlock_bh(&bond->lock);
unblock_netpoll_tx();
+ if (bond->slave_cnt == 0)
+ call_netdevice_notifiers(NETDEV_CHANGEADDR, bond->dev);
+
bond_compute_features(bond);
if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
(old_features & NETIF_F_VLAN_CHALLENGED))
@@ -3007,7 +3010,11 @@ static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks)
trans_start + delta_in_ticks)) ||
bond->curr_active_slave != slave) {
slave->link = BOND_LINK_UP;
- bond->current_arp_slave = NULL;
+ if (bond->current_arp_slave) {
+ bond_set_slave_inactive_flags(
+ bond->current_arp_slave);
+ bond->current_arp_slave = NULL;
+ }
pr_info("%s: link status definitely up for interface %s.\n",
bond->dev->name, slave->dev->name);
@@ -3701,17 +3708,52 @@ static void bond_set_multicast_list(struct net_device *bond_dev)
read_unlock(&bond->lock);
}
-static int bond_neigh_setup(struct net_device *dev, struct neigh_parms *parms)
+static int bond_neigh_init(struct neighbour *n)
{
- struct bonding *bond = netdev_priv(dev);
+ struct bonding *bond = netdev_priv(n->dev);
struct slave *slave = bond->first_slave;
+ const struct net_device_ops *slave_ops;
+ struct neigh_parms parms;
+ int ret;
+
+ if (!slave)
+ return 0;
+
+ slave_ops = slave->dev->netdev_ops;
+
+ if (!slave_ops->ndo_neigh_setup)
+ return 0;
+
+ parms.neigh_setup = NULL;
+ parms.neigh_cleanup = NULL;
+ ret = slave_ops->ndo_neigh_setup(slave->dev, &parms);
+ if (ret)
+ return ret;
+
+ /*
+ * Assign slave's neigh_cleanup to neighbour in case cleanup is called
+ * after the last slave has been detached. Assumes that all slaves
+ * utilize the same neigh_cleanup (true at this writing as only user
+ * is ipoib).
+ */
+ n->parms->neigh_cleanup = parms.neigh_cleanup;
+
+ if (!parms.neigh_setup)
+ return 0;
+
+ return parms.neigh_setup(n);
+}
+
+/*
+ * The bonding ndo_neigh_setup is called at init time beofre any
+ * slave exists. So we must declare proxy setup function which will
+ * be used at run time to resolve the actual slave neigh param setup.
+ */
+static int bond_neigh_setup(struct net_device *dev,
+ struct neigh_parms *parms)
+{
+ parms->neigh_setup = bond_neigh_init;
- if (slave) {
- const struct net_device_ops *slave_ops
- = slave->dev->netdev_ops;
- if (slave_ops->ndo_neigh_setup)
- return slave_ops->ndo_neigh_setup(slave->dev, parms);
- }
return 0;
}
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
View filediff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 44556b7..4b05481 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -1874,7 +1874,6 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
* bnx2x_periodic_task().
*/
smp_mb();
- queue_delayed_work(bnx2x_wq, &bp->period_task, 0);
} else
bp->port.pmf = 0;
drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h
View filediff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h
index cd6dfa9..b9b2633 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h
@@ -25,31 +25,31 @@
(IRO[149].base + ((funcId) * IRO[149].m1))
#define CSTORM_IGU_MODE_OFFSET (IRO[157].base)
#define CSTORM_ISCSI_CQ_SIZE_OFFSET(pfId) \
- (IRO[315].base + ((pfId) * IRO[315].m1))
-#define CSTORM_ISCSI_CQ_SQN_SIZE_OFFSET(pfId) \
(IRO[316].base + ((pfId) * IRO[316].m1))
+#define CSTORM_ISCSI_CQ_SQN_SIZE_OFFSET(pfId) \
+ (IRO[317].base + ((pfId) * IRO[317].m1))
#define CSTORM_ISCSI_EQ_CONS_OFFSET(pfId, iscsiEqId) \
- (IRO[308].base + ((pfId) * IRO[308].m1) + ((iscsiEqId) * IRO[308].m2))
+ (IRO[309].base + ((pfId) * IRO[309].m1) + ((iscsiEqId) * IRO[309].m2))
#define CSTORM_ISCSI_EQ_NEXT_EQE_ADDR_OFFSET(pfId, iscsiEqId) \
- (IRO[310].base + ((pfId) * IRO[310].m1) + ((iscsiEqId) * IRO[310].m2))
+ (IRO[311].base + ((pfId) * IRO[311].m1) + ((iscsiEqId) * IRO[311].m2))
#define CSTORM_ISCSI_EQ_NEXT_PAGE_ADDR_OFFSET(pfId, iscsiEqId) \
This diff is incomplete. Download the complete patch.
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
View fileThis diff is incomplete. Download the complete patch.
drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
View fileThis diff is incomplete. Download the complete patch.
drivers/net/ethernet/intel/e1000e/e1000.h
View fileThis diff is incomplete. Download the complete patch.
drivers/net/ethernet/intel/e1000e/netdev.c
View fileThis diff is incomplete. Download the complete patch.
drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
View fileThis diff is incomplete. Download the complete patch.
drivers/net/ethernet/marvell/sky2.c
View fileThis diff is incomplete. Download the complete patch.
drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
View fileThis diff is incomplete. Download the complete patch.
drivers/net/ethernet/realtek/r8169.c
View fileThis diff is incomplete. Download the complete patch.
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
View fileThis diff is incomplete. Download the complete patch.
drivers/net/phy/icplus.c
View fileThis diff is incomplete. Download the complete patch.
drivers/net/ppp/ppp_generic.c
View fileThis diff is incomplete. Download the complete patch.
fs/splice.c
View fileThis diff is incomplete. Download the complete patch.
include/linux/ethtool.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/netdevice.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/netfilter/xt_set.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/socket.h
View fileThis diff is incomplete. Download the complete patch.
include/net/netfilter/xt_log.h
View fileThis diff is incomplete. Download the complete patch.
net/core/dev.c
View fileThis diff is incomplete. Download the complete patch.
net/core/dev_addr_lists.c
View fileThis diff is incomplete. Download the complete patch.
net/core/filter.c
View fileThis diff is incomplete. Download the complete patch.
net/core/skbuff.c
View fileThis diff is incomplete. Download the complete patch.
net/ipv4/tcp.c
View fileThis diff is incomplete. Download the complete patch.
net/ipv6/mcast.c
View fileThis diff is incomplete. Download the complete patch.
net/netfilter/nf_conntrack_core.c
View fileThis diff is incomplete. Download the complete patch.
net/netfilter/xt_CT.c
View fileThis diff is incomplete. Download the complete patch.
net/netlink/af_netlink.c
View fileThis diff is incomplete. Download the complete patch.
net/phonet/pep.c
View fileThis diff is incomplete. Download the complete patch.
net/sctp/socket.c
View fileThis diff is incomplete. Download the complete patch.
net/socket.c
View fileThis diff is incomplete. Download the complete patch.