diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 117e24f..02813a7 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1833,6 +1833,7 @@ void arch_set_max_freq_ratio(bool turbo_disabled) arch_max_freq_ratio = turbo_disabled ? SCHED_CAPACITY_SCALE : arch_turbo_freq_ratio; } +EXPORT_SYMBOL_GPL(arch_set_max_freq_ratio); static bool turbo_disabled(void) { diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 1e4fbb0..d3e5a6f 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -26,6 +26,7 @@ #include #include +#include #include #include @@ -53,6 +54,7 @@ struct acpi_cpufreq_data { unsigned int resume; unsigned int cpu_feature; unsigned int acpi_perf_cpu; + unsigned int first_perf_state; cpumask_var_t freqdomain_cpus; void (*cpu_freq_write)(struct acpi_pct_register *reg, u32 val); u32 (*cpu_freq_read)(struct acpi_pct_register *reg); @@ -221,10 +223,10 @@ static unsigned extract_msr(struct cpufreq_policy *policy, u32 msr) perf = to_perf_data(data); - cpufreq_for_each_entry(pos, policy->freq_table) + cpufreq_for_each_entry(pos, policy->freq_table + data->first_perf_state) if (msr == perf->states[pos->driver_data].status) return pos->frequency; - return policy->freq_table[0].frequency; + return policy->freq_table[data->first_perf_state].frequency; } static unsigned extract_freq(struct cpufreq_policy *policy, u32 val) @@ -363,6 +365,7 @@ static unsigned int get_cur_freq_on_cpu(unsigned int cpu) struct cpufreq_policy *policy; unsigned int freq; unsigned int cached_freq; + unsigned int state; pr_debug("%s (%d)\n", __func__, cpu); @@ -374,7 +377,11 @@ static unsigned int get_cur_freq_on_cpu(unsigned int cpu) if (unlikely(!data || !policy->freq_table)) return 0; - cached_freq = policy->freq_table[to_perf_data(data)->state].frequency; + state = to_perf_data(data)->state; + if (state < data->first_perf_state) + state = data->first_perf_state; + + cached_freq = policy->freq_table[state].frequency; freq = extract_freq(policy, get_cur_val(cpumask_of(cpu), data)); if (freq != cached_freq) { /* @@ -628,16 +635,54 @@ static int acpi_cpufreq_blacklist(struct cpuinfo_x86 *c) } #endif +#ifdef CONFIG_ACPI_CPPC_LIB +static u64 get_max_boost_ratio(unsigned int cpu) +{ + struct cppc_perf_caps perf_caps; + u64 highest_perf, nominal_perf; + int ret; + + if (acpi_pstate_strict) + return 0; + + ret = cppc_get_perf_caps(cpu, &perf_caps); + if (ret) { + pr_debug("CPU%d: Unable to get performance capabilities (%d)\n", + cpu, ret); + return 0; + } + + highest_perf = perf_caps.highest_perf; + nominal_perf = perf_caps.nominal_perf; + + if (!highest_perf || !nominal_perf) { + pr_debug("CPU%d: highest or nominal performance missing\n", cpu); + return 0; + } + + if (highest_perf < nominal_perf) { + pr_debug("CPU%d: nominal performance above highest\n", cpu); + return 0; + } + + return div_u64(highest_perf << SCHED_CAPACITY_SHIFT, nominal_perf); +} +#else +static inline u64 get_max_boost_ratio(unsigned int cpu) { return 0; } +#endif + static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) { - unsigned int i; - unsigned int valid_states = 0; - unsigned int cpu = policy->cpu; + struct cpufreq_frequency_table *freq_table; + struct acpi_processor_performance *perf; struct acpi_cpufreq_data *data; + unsigned int cpu = policy->cpu; + struct cpuinfo_x86 *c = &cpu_data(cpu); + unsigned int valid_states = 0; unsigned int result = 0; - struct cpuinfo_x86 *c = &cpu_data(policy->cpu); - struct acpi_processor_performance *perf; - struct cpufreq_frequency_table *freq_table; + unsigned int state_count; + u64 max_boost_ratio; + unsigned int i; #ifdef CONFIG_SMP static int blacklisted; #endif @@ -750,8 +795,28 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) goto err_unreg; } - freq_table = kcalloc(perf->state_count + 1, sizeof(*freq_table), - GFP_KERNEL); + state_count = perf->state_count + 1; + + max_boost_ratio = get_max_boost_ratio(cpu); + if (max_boost_ratio) { + /* + * Make a room for one more entry to represent the highest + * available "boost" frequency. + */ + state_count++; + valid_states++; + data->first_perf_state = valid_states; + } else { + /* + * If the maximum "boost" frequency is unknown, ask the arch + * scale-invariance code to use the "nominal" performance for + * CPU utilization scaling so as to prevent the schedutil + * governor from selecting inadequate CPU frequencies. + */ + arch_set_max_freq_ratio(true); + } + + freq_table = kcalloc(state_count, sizeof(*freq_table), GFP_KERNEL); if (!freq_table) { result = -ENOMEM; goto err_unreg; @@ -785,6 +850,30 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) valid_states++; } freq_table[valid_states].frequency = CPUFREQ_TABLE_END; + + if (max_boost_ratio) { + unsigned int state = data->first_perf_state; + unsigned int freq = freq_table[state].frequency; + + /* + * Because the loop above sorts the freq_table entries in the + * descending order, freq is the maximum frequency in the table. + * Assume that it corresponds to the CPPC nominal frequency and + * use it to populate the frequency field of the extra "boost" + * frequency entry. + */ + freq_table[0].frequency = freq * max_boost_ratio >> SCHED_CAPACITY_SHIFT; + /* + * The purpose of the extra "boost" frequency entry is to make + * the rest of cpufreq aware of the real maximum frequency, but + * the way to request it is the same as for the first_perf_state + * entry that is expected to cover the entire range of "boost" + * frequencies of the CPU, so copy the driver_data value from + * that entry. + */ + freq_table[0].driver_data = freq_table[state].driver_data; + } + policy->freq_table = freq_table; perf->state = 0; @@ -858,8 +947,10 @@ static void acpi_cpufreq_cpu_ready(struct cpufreq_policy *policy) { struct acpi_processor_performance *perf = per_cpu_ptr(acpi_perf_data, policy->cpu); + struct acpi_cpufreq_data *data = policy->driver_data; + unsigned int freq = policy->freq_table[data->first_perf_state].frequency; - if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq) + if (perf->states[0].core_frequency * 1000 != freq) pr_warn(FW_WARN "P-state 0 is not max freq\n"); }