Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds

2b69703f · Linus Torvalds <[email protected]> · 2013-05-06 15:41:42 -07:00

Pull LED subsystem updates from Bryan Wu:
 - move LED trigger drivers into a new directory
 - lp55xx common driver updates
 - other led drivers updates and bug fixing

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: leds-asic3: switch to using SIMPLE_DEV_PM_OPS
  leds: leds-bd2802: add CONFIG_PM_SLEEP to suspend/resume functions
  leds: lp55xx: configure the clock detection
  leds: lp55xx: use common clock framework when external clock is used
  leds: leds-ns2: fix oops at module removal
  leds: leds-pwm: Defer led_pwm_set() if PWM can sleep
  leds: lp55xx: fix the sysfs read operation
  leds: lm355x, lm3642: support camera LED triggers for flash and torch
  leds: add camera LED triggers
  leds: trigger: use inline functions instead of macros
  leds: tca6507: Use of_match_ptr() macro
  leds: wm8350: Complain if we fail to reenable DCDC
  leds: renesas: set gpio_request_one() flags param correctly
  leds: leds-ns2: set devm_gpio_request_one() flags param correctly
  leds: leds-lt3593: set devm_gpio_request_one() flags param correctly
  leds: leds-bd2802: remove erroneous __exit annotation
  leds: atmel-pwm: remove erroneous __exit annotation
  leds: move LED trigger drivers into new subdirectory
  leds: add new LP5562 LED driver

Commit: 2b69703fea185bb0ae1af78ca2da41af677b9dff
Parents: 30c67e93 · df92d5ff

Merge commit. Changes below are compared with the first parent: 30c67e93.

Changes

36 files changed · +1149 −220

File	Status	Add	Del	Content
Documentation/leds/00-INDEX	modified	+2	−0	View file
Documentation/leds/leds-lp5521.txt	modified	+0	−19	View file
Documentation/leds/leds-lp5562.txt	added	+120	−0	View file
Documentation/leds/leds-lp55xx.txt	modified	+45	−1	View file
drivers/leds/Kconfig	modified	+13	−102	View file
drivers/leds/Makefile	modified	+2	−9	View file
drivers/leds/leds-asic3.c	modified	+3	−4	View file
drivers/leds/leds-atmel-pwm.c	modified	+2	−2	View file
drivers/leds/leds-bd2802.c	modified	+5	−9	View file
drivers/leds/leds-lm355x.c	modified	+2	−0	View file
drivers/leds/leds-lm3642.c	modified	+2	−0	View file
drivers/leds/leds-lp5521.c	modified	+19	−3	View file
drivers/leds/leds-lp5562.c	added	+599	−0	View file
drivers/leds/leds-lp55xx-common.c	modified	+39	−3	View file
drivers/leds/leds-lp55xx-common.h	modified	+4	−0	View file
drivers/leds/leds-lt3593.c	modified	+3	−2	View file
drivers/leds/leds-ns2.c	modified	+29	−15	View file
drivers/leds/leds-pwm.c	modified	+42	−8	View file
drivers/leds/leds-renesas-tpu.c	modified	+2	−1	View file
drivers/leds/leds-tca6507.c	modified	+2	−2	View file
drivers/leds/leds-wm8350.c	modified	+4	−1	View file
drivers/leds/trigger/Kconfig	added	+111	−0	View file
drivers/leds/trigger/Makefile	added	+10	−0	View file
drivers/leds/ledtrig-backlight.c → drivers/leds/trigger/ledtrig-backlight.c	renamed	+1	−1	View file
drivers/leds/trigger/ledtrig-camera.c	added	+57	−0	View file
drivers/leds/ledtrig-cpu.c → drivers/leds/trigger/ledtrig-cpu.c	renamed	+1	−1	View file
drivers/leds/ledtrig-default-on.c → drivers/leds/trigger/ledtrig-default-on.c	renamed	+1	−1	View file
drivers/leds/ledtrig-gpio.c → drivers/leds/trigger/ledtrig-gpio.c	renamed	+1	−1	View file
drivers/leds/ledtrig-heartbeat.c → drivers/leds/trigger/ledtrig-heartbeat.c	renamed	+1	−1	View file
drivers/leds/ledtrig-ide-disk.c → drivers/leds/trigger/ledtrig-ide-disk.c	renamed	+0	−0	View file
drivers/leds/ledtrig-oneshot.c → drivers/leds/trigger/ledtrig-oneshot.c	renamed	+1	−1	View file
drivers/leds/ledtrig-timer.c → drivers/leds/trigger/ledtrig-timer.c	renamed	+0	−1	View file
drivers/leds/ledtrig-transient.c → drivers/leds/trigger/ledtrig-transient.c	renamed	+1	−1	View file
include/linux/leds.h	modified	+22	−11	View file
include/linux/mmc/host.h	modified	+0	−2	View file
include/linux/platform_data/leds-lp55xx.h	modified	+3	−18	View file

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/leds/00-INDEX

View file

diff --git a/Documentation/leds/00-INDEX b/Documentation/leds/00-INDEX
index 5246090..1ecd159 100644
--- a/Documentation/leds/00-INDEX
+++ b/Documentation/leds/00-INDEX
@@ -6,6 +6,8 @@ leds-lp5521.txt
 	- notes on how to use the leds-lp5521 driver.
 leds-lp5523.txt
 	- notes on how to use the leds-lp5523 driver.
+leds-lp5562.txt
+	- notes on how to use the leds-lp5562 driver.
 leds-lp55xx.txt
 	- description about lp55xx common driver.
 leds-lm3556.txt

Documentation/leds/leds-lp5521.txt

View file

diff --git a/Documentation/leds/leds-lp5521.txt b/Documentation/leds/leds-lp5521.txt
index 270f571..79e4c2e 100644
--- a/Documentation/leds/leds-lp5521.txt
+++ b/Documentation/leds/leds-lp5521.txt
@@ -81,22 +81,3 @@ static struct lp55xx_platform_data lp5521_platform_data = {
 
 If the current is set to 0 in the platform data, that channel is
 disabled and it is not visible in the sysfs.
-
-The 'update_config' : CONFIG register (ADDR 08h)
-This value is platform-specific data.
-If update_config is not defined, the CONFIG register is set with
-'LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT'.
-(Enable auto-powersave, set charge pump to auto, red to battery)
-
-example of update_config :
-
-#define LP5521_CONFIGS	(LP5521_PWM_HF | LP5521_PWRSAVE_EN | \
-			LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT | \
-			LP5521_CLK_INT)
-
-static struct lp55xx_platform_data lp5521_pdata = {
-	.led_config = lp5521_led_config,
-	.num_channels = ARRAY_SIZE(lp5521_led_config),
-	.clock_mode = LP55XX_CLOCK_INT,
-	.update_config = LP5521_CONFIGS,
-};

Documentation/leds/leds-lp5562.txt

View file

diff --git a/Documentation/leds/leds-lp5562.txt b/Documentation/leds/leds-lp5562.txt
new file mode 100644
index 0000000..5a823ff
--- /dev/null
+++ b/Documentation/leds/leds-lp5562.txt
@@ -0,0 +1,120 @@
+Kernel driver for LP5562
+========================
+
+* TI LP5562 LED Driver
+
+Author: Milo(Woogyom) Kim <[email protected]>
+
+Description
+
+  LP5562 can drive up to 4 channels. R/G/B and White.
+  LEDs can be controlled directly via the led class control interface.
+
+  All four channels can be also controlled using the engine micro programs.
+  LP5562 has the internal program memory for running various LED patterns.
+  For the details, please refer to 'firmware' section in leds-lp55xx.txt
+
+Device attribute: engine_mux
+
+  3 Engines are allocated in LP5562, but the number of channel is 4.
+  Therefore each channel should be mapped to the engine number.
+  Value : RGB or W
+
+  This attribute is used for programming LED data with the firmware interface.
+  Unlike the LP5521/LP5523/55231, LP5562 has unique feature for the engine mux,
+  so additional sysfs is required.
+
+  LED Map
+  Red   ... Engine 1 (fixed)
+  Green ... Engine 2 (fixed)
+  Blue  ... Engine 3 (fixed)
+  White ... Engine 1 or 2 or 3 (selective)
+
+How to load the program data using engine_mux
+
+  Before loading the LP5562 program data, engine_mux should be written between
+  the engine selection and loading the firmware.
+  Engine mux has two different mode, RGB and W.
+  RGB is used for loading RGB program data, W is used for W program data.
+
+  For example, run blinking green channel pattern,
+  echo 2 > /sys/bus/i2c/devices/xxxx/select_engine     # 2 is for green channel
+  echo "RGB" > /sys/bus/i2c/devices/xxxx/engine_mux    # engine mux for RGB
+  echo 1 > /sys/class/firmware/lp5562/loading
+  echo "4000600040FF6000" > /sys/class/firmware/lp5562/data
+  echo 0 > /sys/class/firmware/lp5562/loading
+  echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
+
+  To run a blinking white pattern,
+  echo 1 or 2 or 3 > /sys/bus/i2c/devices/xxxx/select_engine
+  echo "W" > /sys/bus/i2c/devices/xxxx/engine_mux
+  echo 1 > /sys/class/firmware/lp5562/loading
+  echo "4000600040FF6000" > /sys/class/firmware/lp5562/data
+  echo 0 > /sys/class/firmware/lp5562/loading
+  echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
+
+How to load the predefined patterns
+
+  Please refer to 'leds-lp55xx.txt"
+
+Setting Current of Each Channel
+
+  Like LP5521 and LP5523/55231, LP5562 provides LED current settings.
+  The 'led_current' and 'max_current' are used.
+
+(Example of Platform data)
+
+To configure the platform specific data, lp55xx_platform_data structure is used.
+
+static struct lp55xx_led_config lp5562_led_config[] = {
+	{
+		.name 		= "R",
+		.chan_nr	= 0,
+		.led_current	= 20,
+		.max_current	= 40,
+	},
+	{
+		.name 		= "G",
+		.chan_nr	= 1,
+		.led_current	= 20,
+		.max_current	= 40,
+	},
+	{
+		.name 		= "B",
+		.chan_nr	= 2,
+		.led_current	= 20,
+		.max_current	= 40,
+	},
+	{
+		.name 		= "W",
+		.chan_nr	= 3,
+		.led_current	= 20,
+		.max_current	= 40,
+	},
+};
+
+static int lp5562_setup(void)
+{
+	/* setup HW resources */
+}
+
+static void lp5562_release(void)
+{
+	/* Release HW resources */
+}
+
+static void lp5562_enable(bool state)
+{
+	/* Control of chip enable signal */
+}
+
+static struct lp55xx_platform_data lp5562_platform_data = {
+        .led_config     = lp5562_led_config,
+        .num_channels   = ARRAY_SIZE(lp5562_led_config),
+        .setup_resources   = lp5562_setup,
+        .release_resources = lp5562_release,
+        .enable            = lp5562_enable,
+};
+
+If the current is set to 0 in the platform data, that channel is
+disabled and it is not visible in the sysfs.

Documentation/leds/leds-lp55xx.txt

View file

diff --git a/Documentation/leds/leds-lp55xx.txt b/Documentation/leds/leds-lp55xx.txt
index ced4186..eec8fa2 100644
--- a/Documentation/leds/leds-lp55xx.txt
+++ b/Documentation/leds/leds-lp55xx.txt
@@ -5,7 +5,7 @@ Authors: Milo(Woogyom) Kim <[email protected]>
 
 Description
 -----------
-LP5521, LP5523/55231 have common features as below.
+LP5521, LP5523/55231 and LP5562 have common features as below.
 
   Register access via the I2C
   Device initialization/deinitialization
@@ -116,3 +116,47 @@ To support this, 'run_engine' and 'firmware_cb' are configurable in each driver.
 run_engine  : Control the selected engine
 firmware_cb : The callback function after loading the firmware is done.
               Chip specific commands for loading and updating program memory.
+
+( Predefined pattern data )
+
+Without the firmware interface, LP55xx driver provides another method for
+loading a LED pattern. That is 'predefined' pattern.
+A predefined pattern is defined in the platform data and load it(or them)
+via the sysfs if needed.
+To use the predefined pattern concept, 'patterns' and 'num_patterns' should be
+configured.
+
+  Example of predefined pattern data:
+
+  /* mode_1: blinking data */
+  static const u8 mode_1[] = {
+		0x40, 0x00, 0x60, 0x00, 0x40, 0xFF, 0x60, 0x00,
+		};
+
+  /* mode_2: always on */
+  static const u8 mode_2[] = { 0x40, 0xFF, };
+
+  struct lp55xx_predef_pattern board_led_patterns[] = {
+	{
+		.r = mode_1,
+		.size_r = ARRAY_SIZE(mode_1),
+	},
+	{
+		.b = mode_2,
+		.size_b = ARRAY_SIZE(mode_2),
+	},
+  }
+
+  struct lp55xx_platform_data lp5562_pdata = {
+  ...
+	.patterns      = board_led_patterns,
+	.num_patterns  = ARRAY_SIZE(board_led_patterns),
+  };
+
+Then, mode_1 and mode_2 can be run via through the sysfs.
+
+  echo 1 > /sys/bus/i2c/devices/xxxx/led_pattern    # red blinking LED pattern
+  echo 2 > /sys/bus/i2c/devices/xxxx/led_pattern    # blue LED always on
+
+To stop running pattern,
+  echo 0 > /sys/bus/i2c/devices/xxxx/led_pattern

drivers/leds/Kconfig

View file

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index ec50824..d44806d 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -194,8 +194,8 @@ config LEDS_LP3944
 	  module will be called leds-lp3944.
 
 config LEDS_LP55XX_COMMON
-	tristate "Common Driver for TI/National LP5521 and LP5523/55231"
-	depends on LEDS_LP5521 || LEDS_LP5523
+	tristate "Common Driver for TI/National LP5521, LP5523/55231 and LP5562"
+	depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562
 	select FW_LOADER
 	help
 	  This option supports common operations for LP5521 and LP5523/55231
@@ -222,6 +222,16 @@ config LEDS_LP5523
 	  Driver provides direct control via LED class and interface for
 	  programming the engines.
 
+config LEDS_LP5562
+	tristate "LED Support for TI LP5562 LED driver chip"
+	depends on LEDS_CLASS && I2C
+	select LEDS_LP55XX_COMMON
+	help
+	  If you say yes here you get support for TI LP5562 LED driver.
+	  It is 4 channels chip with programmable engines.
+	  Driver provides direct control via LED class and interface for
+	  programming the engines.
+
 config LEDS_LP8788
 	tristate "LED support for the TI LP8788 PMIC"
 	depends on LEDS_CLASS
@@ -469,106 +479,7 @@ config LEDS_BLINKM
 	  This option enables support for the BlinkM RGB LED connected
 	  through I2C. Say Y to enable support for the BlinkM LED.
 
-config LEDS_TRIGGERS
-	bool "LED Trigger support"
-	depends on LEDS_CLASS
-	help
-	  This option enables trigger support for the leds class.
-	  These triggers allow kernel events to drive the LEDs and can
-	  be configured via sysfs. If unsure, say Y.
-
 comment "LED Triggers"
-
-config LEDS_TRIGGER_TIMER
-	tristate "LED Timer Trigger"
-	depends on LEDS_TRIGGERS
-	help
-	  This allows LEDs to be controlled by a programmable timer
-	  via sysfs. Some LED hardware can be programmed to start
-	  blinking the LED without any further software interaction.
-	  For more details read Documentation/leds/leds-class.txt.
-
-	  If unsure, say Y.
-
-config LEDS_TRIGGER_ONESHOT
-	tristate "LED One-shot Trigger"
-	depends on LEDS_TRIGGERS
-	help
-	  This allows LEDs to blink in one-shot pulses with parameters
-	  controlled via sysfs.  It's useful to notify the user on
-	  sporadic events, when there are no clear begin and end trap points,
-	  or on dense events, where this blinks the LED at constant rate if
-	  rearmed continuously.
-
-	  It also shows how to use the led_blink_set_oneshot() function.
-
-	  If unsure, say Y.
-
-config LEDS_TRIGGER_IDE_DISK
-	bool "LED IDE Disk Trigger"
-	depends on IDE_GD_ATA
-	depends on LEDS_TRIGGERS
-	help
-	  This allows LEDs to be controlled by IDE disk activity.
-	  If unsure, say Y.
-
-config LEDS_TRIGGER_HEARTBEAT
-	tristate "LED Heartbeat Trigger"
-	depends on LEDS_TRIGGERS
-	help
-	  This allows LEDs to be controlled by a CPU load average.
-	  The flash frequency is a hyperbolic function of the 1-minute
-	  load average.
-	  If unsure, say Y.
-
-config LEDS_TRIGGER_BACKLIGHT
-	tristate "LED backlight Trigger"
-	depends on LEDS_TRIGGERS
-	help
-	  This allows LEDs to be controlled as a backlight device: they
-	  turn off and on when the display is blanked and unblanked.
-
-	  If unsure, say N.
-
-config LEDS_TRIGGER_CPU
-	bool "LED CPU Trigger"
-	depends on LEDS_TRIGGERS
-	help
-	  This allows LEDs to be controlled by active CPUs. This shows
-	  the active CPUs across an array of LEDs so you can see which
-	  CPUs are active on the system at any given moment.
-
-	  If unsure, say N.
-
-config LEDS_TRIGGER_GPIO
-	tristate "LED GPIO Trigger"
-	depends on LEDS_TRIGGERS
-	depends on GPIOLIB
-	help
-	  This allows LEDs to be controlled by gpio events. It's good
-	  when using gpios as switches and triggering the needed LEDs
-	  from there. One use case is n810's keypad LEDs that could
-	  be triggered by this trigger when user slides up to show
-	  keypad.
-
-	  If unsure, say N.
-
-config LEDS_TRIGGER_DEFAULT_ON
-	tristate "LED Default ON Trigger"
-	depends on LEDS_TRIGGERS
-	help
-	  This allows LEDs to be initialised in the ON state.
-	  If unsure, say Y.
-
-comment "iptables trigger is under Netfilter config (LED target)"
-	depends on LEDS_TRIGGERS
-
-config LEDS_TRIGGER_TRANSIENT
-	tristate "LED Transient Trigger"
-	depends on LEDS_TRIGGERS
-	help
-	  This allows one time activation of a transient state on
-	  GPIO/PWM based hardware.
-	  If unsure, say Y.
+source "drivers/leds/trigger/Kconfig"
 
 endif # NEW_LEDS

drivers/leds/Makefile

View file

diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 215e7e3..ac28977 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
 obj-$(CONFIG_LEDS_LP55XX_COMMON)	+= leds-lp55xx-common.o
 obj-$(CONFIG_LEDS_LP5521)		+= leds-lp5521.o
 obj-$(CONFIG_LEDS_LP5523)		+= leds-lp5523.o
+obj-$(CONFIG_LEDS_LP5562)		+= leds-lp5562.o
 obj-$(CONFIG_LEDS_LP8788)		+= leds-lp8788.o
 obj-$(CONFIG_LEDS_TCA6507)		+= leds-tca6507.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
@@ -57,12 +58,4 @@ obj-$(CONFIG_LEDS_BLINKM)		+= leds-blinkm.o
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
 
 # LED Triggers
-obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
-obj-$(CONFIG_LEDS_TRIGGER_ONESHOT)	+= ledtrig-oneshot.o
-obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= ledtrig-ide-disk.o
-obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= ledtrig-heartbeat.o
-obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+= ledtrig-backlight.o
-obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
-obj-$(CONFIG_LEDS_TRIGGER_CPU)		+= ledtrig-cpu.o
-obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
-obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT)	+= ledtrig-transient.o
+obj-$(CONFIG_LEDS_TRIGGERS)		+= trigger/

drivers/leds/leds-asic3.c

View file

diff --git a/drivers/leds/leds-asic3.c b/drivers/leds/leds-asic3.c
index b474745..cf9efe4 100644
--- a/drivers/leds/leds-asic3.c
+++ b/drivers/leds/leds-asic3.c
@@ -134,6 +134,7 @@ static int asic3_led_remove(struct platform_device *pdev)
 	return mfd_cell_disable(pdev);
 }
 
+#ifdef CONFIG_PM_SLEEP
 static int asic3_led_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -159,11 +160,9 @@ static int asic3_led_resume(struct device *dev)
 
 	return ret;
 }
+#endif
 
-static const struct dev_pm_ops asic3_led_pm_ops = {
-	.suspend	= asic3_led_suspend,
-	.resume		= asic3_led_resume,
-};
+static SIMPLE_DEV_PM_OPS(asic3_led_pm_ops, asic3_led_suspend, asic3_led_resume);
 
 static struct platform_driver asic3_led_driver = {
 	.probe		= asic3_led_probe,

drivers/leds/leds-atmel-pwm.c

View file

diff --git a/drivers/leds/leds-atmel-pwm.c b/drivers/leds/leds-atmel-pwm.c
index 3867735..8a39c5b 100644
--- a/drivers/leds/leds-atmel-pwm.c
+++ b/drivers/leds/leds-atmel-pwm.c
@@ -113,7 +113,7 @@ err:
 	return status;
 }
 
-static int __exit pwmled_remove(struct platform_device *pdev)
+static int pwmled_remove(struct platform_device *pdev)
 {
 	const struct gpio_led_platform_data	*pdata;
 	struct pwmled				*leds;
@@ -140,7 +140,7 @@ static struct platform_driver pwmled_driver = {
 	},
 	/* REVISIT add suspend() and resume() methods */
 	.probe =	pwmled_probe,
-	.remove =	__exit_p(pwmled_remove),
+	.remove =	pwmled_remove,
 };
 
 module_platform_driver(pwmled_driver);

drivers/leds/leds-bd2802.c

View file

diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c
index 8515170..2db0423 100644
--- a/drivers/leds/leds-bd2802.c
+++ b/drivers/leds/leds-bd2802.c
@@ -732,7 +732,7 @@ failed_unregister_dev_file:
 	return ret;
 }
 
-static int __exit bd2802_remove(struct i2c_client *client)
+static int bd2802_remove(struct i2c_client *client)
 {
 	struct bd2802_led *led = i2c_get_clientdata(client);
 	int i;
@@ -747,8 +747,7 @@ static int __exit bd2802_remove(struct i2c_client *client)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-
+#ifdef CONFIG_PM_SLEEP
 static void bd2802_restore_state(struct bd2802_led *led)
 {
 	int i;
@@ -785,12 +784,9 @@ static int bd2802_resume(struct device *dev)
 
 	return 0;
 }
+#endif
 
 static SIMPLE_DEV_PM_OPS(bd2802_pm, bd2802_suspend, bd2802_resume);
-#define BD2802_PM (&bd2802_pm)
-#else		/* CONFIG_PM */
-#define BD2802_PM NULL
-#endif
 
 static const struct i2c_device_id bd2802_id[] = {
 	{ "BD2802", 0 },
@@ -801,10 +797,10 @@ MODULE_DEVICE_TABLE(i2c, bd2802_id);
 static struct i2c_driver bd2802_i2c_driver = {
 	.driver	= {
 		.name	= "BD2802",
-		.pm	= BD2802_PM,
+		.pm	= &bd2802_pm,
 	},
 	.probe		= bd2802_probe,
-	.remove		= __exit_p(bd2802_remove),
+	.remove		= bd2802_remove,
 	.id_table	= bd2802_id,
 };
 

drivers/leds/leds-lm355x.c

View file

diff --git a/drivers/leds/leds-lm355x.c b/drivers/leds/leds-lm355x.c
index 4117235..d81a8e7 100644
--- a/drivers/leds/leds-lm355x.c
+++ b/drivers/leds/leds-lm355x.c
@@ -477,6 +477,7 @@ static int lm355x_probe(struct i2c_client *client,
 	chip->cdev_flash.name = "flash";
 	chip->cdev_flash.max_brightness = 16;
 	chip->cdev_flash.brightness_set = lm355x_strobe_brightness_set;
+	chip->cdev_flash.default_trigger = "flash";
 	err = led_classdev_register((struct device *)
 				    &client->dev, &chip->cdev_flash);
 	if (err < 0)
@@ -486,6 +487,7 @@ static int lm355x_probe(struct i2c_client *client,
 	chip->cdev_torch.name = "torch";
 	chip->cdev_torch.max_brightness = 8;
 	chip->cdev_torch.brightness_set = lm355x_torch_brightness_set;
+	chip->cdev_torch.default_trigger = "torch";
 	err = led_classdev_register((struct device *)
 				    &client->dev, &chip->cdev_torch);
 	if (err < 0)

drivers/leds/leds-lm3642.c

View file

diff --git a/drivers/leds/leds-lm3642.c b/drivers/leds/leds-lm3642.c
index 9f428d9..f361bbe 100644
--- a/drivers/leds/leds-lm3642.c
+++ b/drivers/leds/leds-lm3642.c
@@ -363,6 +363,7 @@ static int lm3642_probe(struct i2c_client *client,
 	chip->cdev_flash.name = "flash";
 	chip->cdev_flash.max_brightness = 16;
 	chip->cdev_flash.brightness_set = lm3642_strobe_brightness_set;
+	chip->cdev_flash.default_trigger = "flash";
 	err = led_classdev_register((struct device *)
 				    &client->dev, &chip->cdev_flash);
 	if (err < 0) {
@@ -380,6 +381,7 @@ static int lm3642_probe(struct i2c_client *client,
 	chip->cdev_torch.name = "torch";
 	chip->cdev_torch.max_brightness = 8;
 	chip->cdev_torch.brightness_set = lm3642_torch_brightness_set;
+	chip->cdev_torch.default_trigger = "torch";
 	err = led_classdev_register((struct device *)
 				    &client->dev, &chip->cdev_torch);
 	if (err < 0) {

drivers/leds/leds-lp5521.c

View file

diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index 1001347..19752c9 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -68,6 +68,18 @@
 #define LP5521_ENABLE_RUN_PROGRAM	\
 	(LP5521_ENABLE_DEFAULT | LP5521_EXEC_RUN)
 
+/* CONFIG register */
+#define LP5521_PWM_HF			0x40	/* PWM: 0 = 256Hz, 1 = 558Hz */
+#define LP5521_PWRSAVE_EN		0x20	/* 1 = Power save mode */
+#define LP5521_CP_MODE_OFF		0	/* Charge pump (CP) off */
+#define LP5521_CP_MODE_BYPASS		8	/* CP forced to bypass mode */
+#define LP5521_CP_MODE_1X5		0x10	/* CP forced to 1.5x mode */
+#define LP5521_CP_MODE_AUTO		0x18	/* Automatic mode selection */
+#define LP5521_R_TO_BATT		0x04	/* R out: 0 = CP, 1 = Vbat */
+#define LP5521_CLK_INT			0x01	/* Internal clock */
+#define LP5521_DEFAULT_CFG		\
+	(LP5521_PWM_HF | LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO)
+
 /* Status */
 #define LP5521_EXT_CLK_USED		0x08
 
@@ -296,8 +308,11 @@ static int lp5521_post_init_device(struct lp55xx_chip *chip)
 	/* Set all PWMs to direct control mode */
 	ret = lp55xx_write(chip, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
 
-	val = chip->pdata->update_config ?
-		: (LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT);
+	/* Update configuration for the clock setting */
+	val = LP5521_DEFAULT_CFG;
+	if (!lp55xx_is_extclk_used(chip))
+		val |= LP5521_CLK_INT;
+
 	ret = lp55xx_write(chip, LP5521_REG_CONFIG, val);
 	if (ret)
 		return ret;
@@ -360,7 +375,8 @@ static ssize_t lp5521_selftest(struct device *dev,
 	mutex_lock(&chip->lock);
 	ret = lp5521_run_selftest(chip, buf);
 	mutex_unlock(&chip->lock);
-	return sprintf(buf, "%s\n", ret ? "FAIL" : "OK");
+
+	return scnprintf(buf, PAGE_SIZE, "%s\n", ret ? "FAIL" : "OK");
 }
 
 /* device attributes */

drivers/leds/leds-lp5562.c

View file

diff --git a/drivers/leds/leds-lp5562.c b/drivers/leds/leds-lp5562.c
new file mode 100644
index 0000000..513f239
--- /dev/null
+++ b/drivers/leds/leds-lp5562.c
@@ -0,0 +1,599 @@
+/*
+ * LP5562 LED driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/init.h>