Merge tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Merge commit. Changes below are compared with the first parent: 09b56d5a.
Changes
34 files changed · +3026 −443
Only the first 600 diff lines are shown. Download the complete patch.
Documentation/devicetree/bindings/dma/arm-pl08x.txt
View filediff --git a/Documentation/devicetree/bindings/dma/arm-pl08x.txt b/Documentation/devicetree/bindings/dma/arm-pl08x.txt
index 8a0097a..0ba81f7 100644
--- a/Documentation/devicetree/bindings/dma/arm-pl08x.txt
+++ b/Documentation/devicetree/bindings/dma/arm-pl08x.txt
@@ -3,6 +3,11 @@
Required properties:
- compatible: "arm,pl080", "arm,primecell";
"arm,pl081", "arm,primecell";
+ "faraday,ftdmac020", "arm,primecell"
+- arm,primecell-periphid: on the FTDMAC020 the primecell ID is not hard-coded
+ in the hardware and must be specified here as <0x0003b080>. This number
+ follows the PrimeCell standard numbering using the JEP106 vendor code 0x38
+ for Faraday Technology.
- reg: Address range of the PL08x registers
- interrupt: The PL08x interrupt number
- clocks: The clock running the IP core clock
@@ -20,8 +25,8 @@ Optional properties:
- dma-requests: contains the total number of DMA requests supported by the DMAC
- memcpy-burst-size: the size of the bursts for memcpy: 1, 4, 8, 16, 32
64, 128 or 256 bytes are legal values
-- memcpy-bus-width: the bus width used for memcpy: 8, 16 or 32 are legal
- values
+- memcpy-bus-width: the bus width used for memcpy in bits: 8, 16 or 32 are legal
+ values, the Faraday FTDMAC020 can also accept 64 bits
Clients
Required properties:
Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
View filediff --git a/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt b/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
new file mode 100644
index 0000000..092913a
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
@@ -0,0 +1,29 @@
+* Broadcom SBA RAID engine
+
+Required properties:
+- compatible: Should be one of the following
+ "brcm,iproc-sba"
+ "brcm,iproc-sba-v2"
+ The "brcm,iproc-sba" has support for only 6 PQ coefficients
+ The "brcm,iproc-sba-v2" has support for only 30 PQ coefficients
+- mboxes: List of phandle and mailbox channel specifiers
+
+Example:
+
+raid_mbox: mbox@67400000 {
+ ...
+ #mbox-cells = <3>;
+ ...
+};
+
+raid0 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 0 0x1 0xffff>,
+ <&raid_mbox 1 0x1 0xffff>,
+ <&raid_mbox 2 0x1 0xffff>,
+ <&raid_mbox 3 0x1 0xffff>,
+ <&raid_mbox 4 0x1 0xffff>,
+ <&raid_mbox 5 0x1 0xffff>,
+ <&raid_mbox 6 0x1 0xffff>,
+ <&raid_mbox 7 0x1 0xffff>;
+};
Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
View filediff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
index 3316a9c..79a204d 100644
--- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
+++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
@@ -30,8 +30,9 @@ Required Properties:
- interrupts: interrupt specifiers for the DMAC, one for each entry in
interrupt-names.
-- interrupt-names: one entry per channel, named "ch%u", where %u is the
- channel number ranging from zero to the number of channels minus one.
+- interrupt-names: one entry for the error interrupt, named "error", plus one
+ entry per channel, named "ch%u", where %u is the channel number ranging from
+ zero to the number of channels minus one.
- clock-names: "fck" for the functional clock
- clocks: a list of phandle + clock-specifier pairs, one for each entry
Documentation/devicetree/bindings/dma/shdma.txt
View filediff --git a/Documentation/devicetree/bindings/dma/shdma.txt b/Documentation/devicetree/bindings/dma/shdma.txt
index 2a3f3b8..a91920a 100644
--- a/Documentation/devicetree/bindings/dma/shdma.txt
+++ b/Documentation/devicetree/bindings/dma/shdma.txt
@@ -1,6 +1,6 @@
* SHDMA Device Tree bindings
-Sh-/r-mobile and r-car systems often have multiple identical DMA controller
+Sh-/r-mobile and R-Car systems often have multiple identical DMA controller
instances, capable of serving any of a common set of DMA slave devices, using
the same configuration. To describe this topology we require all compatible
SHDMA DT nodes to be placed under a DMA multiplexer node. All such compatible
arch/arm/mach-lpc32xx/phy3250.c
View filediff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 6c52bd3..e48cc06 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -137,6 +137,9 @@ static void pl08x_put_signal(const struct pl08x_channel_data *cd, int ch)
}
static struct pl08x_platform_data pl08x_pd = {
+ /* Some reasonable memcpy defaults */
+ .memcpy_burst_size = PL08X_BURST_SZ_256,
+ .memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
.slave_channels = &pl08x_slave_channels[0],
.num_slave_channels = ARRAY_SIZE(pl08x_slave_channels),
.get_xfer_signal = pl08x_get_signal,
arch/arm/mach-s3c64xx/pl080.c
View filediff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c
index 261820a..66fc774 100644
--- a/arch/arm/mach-s3c64xx/pl080.c
+++ b/arch/arm/mach-s3c64xx/pl080.c
@@ -137,16 +137,10 @@ static const struct dma_slave_map s3c64xx_dma0_slave_map[] = {
};
struct pl08x_platform_data s3c64xx_dma0_plat_data = {
- .memcpy_channel = {
- .bus_id = "memcpy",
- .cctl_memcpy =
- (PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
- PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT |
- PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
- PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT |
- PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE |
- PL080_CONTROL_PROT_SYS),
- },
+ .memcpy_burst_size = PL08X_BURST_SZ_4,
+ .memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
+ .memcpy_prot_buff = true,
+ .memcpy_prot_cache = true,
.lli_buses = PL08X_AHB1,
.mem_buses = PL08X_AHB1,
.get_xfer_signal = pl08x_get_xfer_signal,
@@ -238,16 +232,10 @@ static const struct dma_slave_map s3c64xx_dma1_slave_map[] = {
};
struct pl08x_platform_data s3c64xx_dma1_plat_data = {
- .memcpy_channel = {
- .bus_id = "memcpy",
- .cctl_memcpy =
- (PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
- PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT |
- PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
- PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT |
- PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE |
- PL080_CONTROL_PROT_SYS),
- },
+ .memcpy_burst_size = PL08X_BURST_SZ_4,
+ .memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
+ .memcpy_prot_buff = true,
+ .memcpy_prot_cache = true,
.lli_buses = PL08X_AHB1,
.mem_buses = PL08X_AHB1,
.get_xfer_signal = pl08x_get_xfer_signal,
arch/arm/mach-spear/spear3xx.c
View filediff --git a/arch/arm/mach-spear/spear3xx.c b/arch/arm/mach-spear/spear3xx.c
index 23394ac..8537fcf 100644
--- a/arch/arm/mach-spear/spear3xx.c
+++ b/arch/arm/mach-spear/spear3xx.c
@@ -44,16 +44,10 @@ struct pl022_ssp_controller pl022_plat_data = {
/* dmac device registration */
struct pl08x_platform_data pl080_plat_data = {
- .memcpy_channel = {
- .bus_id = "memcpy",
- .cctl_memcpy =
- (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
- PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
- PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
- PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
- PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
- PL080_CONTROL_PROT_SYS),
- },
+ .memcpy_burst_size = PL08X_BURST_SZ_16,
+ .memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
+ .memcpy_prot_buff = true,
+ .memcpy_prot_cache = true,
.lli_buses = PL08X_AHB1,
.mem_buses = PL08X_AHB1,
.get_xfer_signal = pl080_get_signal,
arch/arm/mach-spear/spear6xx.c
View filediff --git a/arch/arm/mach-spear/spear6xx.c b/arch/arm/mach-spear/spear6xx.c
index ccf3573..c5fc110 100644
--- a/arch/arm/mach-spear/spear6xx.c
+++ b/arch/arm/mach-spear/spear6xx.c
@@ -322,16 +322,10 @@ static struct pl08x_channel_data spear600_dma_info[] = {
};
static struct pl08x_platform_data spear6xx_pl080_plat_data = {
- .memcpy_channel = {
- .bus_id = "memcpy",
- .cctl_memcpy =
- (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
- PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
- PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
- PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
- PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
- PL080_CONTROL_PROT_SYS),
- },
+ .memcpy_burst_size = PL08X_BURST_SZ_16,
+ .memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
+ .memcpy_prot_buff = true,
+ .memcpy_prot_cache = true,
.lli_buses = PL08X_AHB1,
.mem_buses = PL08X_AHB1,
.get_xfer_signal = pl080_get_signal,
crypto/async_tx/async_pq.c
View filediff --git a/crypto/async_tx/async_pq.c b/crypto/async_tx/async_pq.c
index f83de99..56bd612 100644
--- a/crypto/async_tx/async_pq.c
+++ b/crypto/async_tx/async_pq.c
@@ -62,9 +62,6 @@ do_async_gen_syndrome(struct dma_chan *chan,
dma_addr_t dma_dest[2];
int src_off = 0;
- if (submit->flags & ASYNC_TX_FENCE)
- dma_flags |= DMA_PREP_FENCE;
-
while (src_cnt > 0) {
submit->flags = flags_orig;
pq_src_cnt = min(src_cnt, dma_maxpq(dma, dma_flags));
@@ -83,6 +80,8 @@ do_async_gen_syndrome(struct dma_chan *chan,
if (cb_fn_orig)
dma_flags |= DMA_PREP_INTERRUPT;
}
+ if (submit->flags & ASYNC_TX_FENCE)
+ dma_flags |= DMA_PREP_FENCE;
/* Drivers force forward progress in case they can not provide
* a descriptor
drivers/dma/Kconfig
View filediff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 24e8597..fa8f9c0 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -62,8 +62,10 @@ config AMBA_PL08X
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
- Platform has a PL08x DMAC device
- which can provide DMA engine support
+ Say yes if your platform has a PL08x DMAC device which can
+ provide DMA engine support. This includes the original ARM
+ PL080 and PL081, Samsungs PL080 derivative and Faraday
+ Technology's FTDMAC020 PL080 derivative.
config AMCC_PPC440SPE_ADMA
tristate "AMCC PPC440SPe ADMA support"
@@ -99,6 +101,21 @@ config AXI_DMAC
controller is often used in Analog Device's reference designs for FPGA
platforms.
+config BCM_SBA_RAID
+ tristate "Broadcom SBA RAID engine support"
+ depends on ARM64 || COMPILE_TEST
+ depends on MAILBOX && RAID6_PQ
+ select DMA_ENGINE
+ select DMA_ENGINE_RAID
+ select ASYNC_TX_DISABLE_XOR_VAL_DMA
+ select ASYNC_TX_DISABLE_PQ_VAL_DMA
+ default ARCH_BCM_IPROC
+ help
+ Enable support for Broadcom SBA RAID Engine. The SBA RAID
+ engine is available on most of the Broadcom iProc SoCs. It
+ has the capability to offload memcpy, xor and pq computation
+ for raid5/6.
+
config COH901318
bool "ST-Ericsson COH901318 DMA support"
select DMA_ENGINE
@@ -354,13 +371,12 @@ config MV_XOR_V2
config MXS_DMA
bool "MXS DMA support"
- depends on SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q || SOC_IMX6UL
+ depends on ARCH_MXS || ARCH_MXC || COMPILE_TEST
select STMP_DEVICE
select DMA_ENGINE
help
Support the MXS DMA engine. This engine including APBH-DMA
- and APBX-DMA is integrated into Freescale
- i.MX23/28/MX6Q/MX6DL/MX6UL chips.
+ and APBX-DMA is integrated into some Freescale chips.
config MX3_IPU
bool "MX3x Image Processing Unit support"
drivers/dma/Makefile
View filediff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 0b723e9..d12ab29 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_AMCC_PPC440SPE_ADMA) += ppc4xx/
obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
obj-$(CONFIG_AT_XDMAC) += at_xdmac.o
obj-$(CONFIG_AXI_DMAC) += dma-axi-dmac.o
+obj-$(CONFIG_BCM_SBA_RAID) += bcm-sba-raid.o
obj-$(CONFIG_COH901318) += coh901318.o coh901318_lli.o
obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o
obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o
drivers/dma/amba-pl08x.c
View filediff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index 6bb8813..13cc95c 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -1,9 +1,10 @@
/*
* Copyright (c) 2006 ARM Ltd.
* Copyright (c) 2010 ST-Ericsson SA
+ * Copyirght (c) 2017 Linaro Ltd.
*
* Author: Peter Pearse <[email protected]>
- * Author: Linus Walleij <[email protected]>
+ * Author: Linus Walleij <[email protected]>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
@@ -110,11 +111,12 @@ struct pl08x_driver_data;
* @channels: the number of channels available in this variant
* @signals: the number of request signals available from the hardware
* @dualmaster: whether this version supports dual AHB masters or not.
- * @nomadik: whether the channels have Nomadik security extension bits
- * that need to be checked for permission before use and some registers are
- * missing
- * @pl080s: whether this version is a PL080S, which has separate register and
- * LLI word for transfer size.
+ * @nomadik: whether this variant is a ST Microelectronics Nomadik, where the
+ * channels have Nomadik security extension bits that need to be checked
+ * for permission before use and some registers are missing
+ * @pl080s: whether this variant is a Samsung PL080S, which has separate
+ * register and LLI word for transfer size.
+ * @ftdmac020: whether this variant is a Faraday Technology FTDMAC020
* @max_transfer_size: the maximum single element transfer size for this
* PL08x variant.
*/
@@ -125,6 +127,7 @@ struct vendor_data {
bool dualmaster;
bool nomadik;
bool pl080s;
+ bool ftdmac020;
u32 max_transfer_size;
};
@@ -148,19 +151,34 @@ struct pl08x_bus_data {
* @id: physical index to this channel
* @base: memory base address for this physical channel
* @reg_config: configuration address for this physical channel
+ * @reg_control: control address for this physical channel
+ * @reg_src: transfer source address register
+ * @reg_dst: transfer destination address register
+ * @reg_lli: transfer LLI address register
+ * @reg_busy: if the variant has a special per-channel busy register,
+ * this contains a pointer to it
* @lock: a lock to use when altering an instance of this struct
* @serving: the virtual channel currently being served by this physical
* channel
* @locked: channel unavailable for the system, e.g. dedicated to secure
* world
+ * @ftdmac020: channel is on a FTDMAC020
+ * @pl080s: channel is on a PL08s
*/
struct pl08x_phy_chan {
unsigned int id;
void __iomem *base;
void __iomem *reg_config;
+ void __iomem *reg_control;
+ void __iomem *reg_src;
+ void __iomem *reg_dst;
+ void __iomem *reg_lli;
+ void __iomem *reg_busy;
spinlock_t lock;
struct pl08x_dma_chan *serving;
bool locked;
+ bool ftdmac020;
+ bool pl080s;
};
/**
@@ -253,8 +271,9 @@ struct pl08x_dma_chan {
/**
* struct pl08x_driver_data - the local state holder for the PL08x
- * @slave: slave engine for this instance
+ * @slave: optional slave engine for this instance
* @memcpy: memcpy engine for this instance
+ * @has_slave: the PL08x has a slave engine (routed signals)
* @base: virtual memory base (remapped) for the PL08x
* @adev: the corresponding AMBA (PrimeCell) bus entry
* @vd: vendor data for this PL08x variant
@@ -269,6 +288,7 @@ struct pl08x_dma_chan {
struct pl08x_driver_data {
struct dma_device slave;
struct dma_device memcpy;
+ bool has_slave;
void __iomem *base;
struct amba_device *adev;
const struct vendor_data *vd;
@@ -360,10 +380,24 @@ static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch)
{
unsigned int val;
+ /* If we have a special busy register, take a shortcut */
+ if (ch->reg_busy) {
+ val = readl(ch->reg_busy);
+ return !!(val & BIT(ch->id));
+ }
val = readl(ch->reg_config);
return val & PL080_CONFIG_ACTIVE;
}
+/*
+ * pl08x_write_lli() - Write an LLI into the DMA controller.
+ *
+ * The PL08x derivatives support linked lists, but the first item of the
+ * list containing the source, destination, control word and next LLI is
+ * ignored. Instead the driver has to write those values directly into the
+ * SRC, DST, LLI and control registers. On FTDMAC020 also the SIZE
+ * register need to be set up for the first transfer.
+ */
static void pl08x_write_lli(struct pl08x_driver_data *pl08x,
struct pl08x_phy_chan *phychan, const u32 *lli, u32 ccfg)
{
@@ -381,11 +415,112 @@ static void pl08x_write_lli(struct pl08x_driver_data *pl08x,
phychan->id, lli[PL080_LLI_SRC], lli[PL080_LLI_DST],
lli[PL080_LLI_LLI], lli[PL080_LLI_CCTL], ccfg);
- writel_relaxed(lli[PL080_LLI_SRC], phychan->base + PL080_CH_SRC_ADDR);
- writel_relaxed(lli[PL080_LLI_DST], phychan->base + PL080_CH_DST_ADDR);
- writel_relaxed(lli[PL080_LLI_LLI], phychan->base + PL080_CH_LLI);
- writel_relaxed(lli[PL080_LLI_CCTL], phychan->base + PL080_CH_CONTROL);
+ writel_relaxed(lli[PL080_LLI_SRC], phychan->reg_src);
+ writel_relaxed(lli[PL080_LLI_DST], phychan->reg_dst);
+ writel_relaxed(lli[PL080_LLI_LLI], phychan->reg_lli);
+
+ /*
+ * The FTMAC020 has a different layout in the CCTL word of the LLI
+ * and the CCTL register which is split in CSR and SIZE registers.
+ * Convert the LLI item CCTL into the proper values to write into
+ * the CSR and SIZE registers.
+ */
+ if (phychan->ftdmac020) {
+ u32 llictl = lli[PL080_LLI_CCTL];
+ u32 val = 0;
+
+ /* Write the transfer size (12 bits) to the size register */
+ writel_relaxed(llictl & FTDMAC020_LLI_TRANSFER_SIZE_MASK,
+ phychan->base + FTDMAC020_CH_SIZE);
+ /*
+ * Then write the control bits 28..16 to the control register
+ * by shuffleing the bits around to where they are in the
+ * main register. The mapping is as follows:
+ * Bit 28: TC_MSK - mask on all except last LLI
+ * Bit 27..25: SRC_WIDTH
+ * Bit 24..22: DST_WIDTH
+ * Bit 21..20: SRCAD_CTRL
+ * Bit 19..17: DSTAD_CTRL
+ * Bit 17: SRC_SEL
+ * Bit 16: DST_SEL
+ */
+ if (llictl & FTDMAC020_LLI_TC_MSK)
+ val |= FTDMAC020_CH_CSR_TC_MSK;
+ val |= ((llictl & FTDMAC020_LLI_SRC_WIDTH_MSK) >>
+ (FTDMAC020_LLI_SRC_WIDTH_SHIFT -
+ FTDMAC020_CH_CSR_SRC_WIDTH_SHIFT));
+ val |= ((llictl & FTDMAC020_LLI_DST_WIDTH_MSK) >>
+ (FTDMAC020_LLI_DST_WIDTH_SHIFT -
+ FTDMAC020_CH_CSR_DST_WIDTH_SHIFT));
+ val |= ((llictl & FTDMAC020_LLI_SRCAD_CTL_MSK) >>
+ (FTDMAC020_LLI_SRCAD_CTL_SHIFT -
+ FTDMAC020_CH_CSR_SRCAD_CTL_SHIFT));
+ val |= ((llictl & FTDMAC020_LLI_DSTAD_CTL_MSK) >>
+ (FTDMAC020_LLI_DSTAD_CTL_SHIFT -
+ FTDMAC020_CH_CSR_DSTAD_CTL_SHIFT));
+ if (llictl & FTDMAC020_LLI_SRC_SEL)
+ val |= FTDMAC020_CH_CSR_SRC_SEL;
+ if (llictl & FTDMAC020_LLI_DST_SEL)
+ val |= FTDMAC020_CH_CSR_DST_SEL;
+
+ /*
+ * Set up the bits that exist in the CSR but are not
+ * part the LLI, i.e. only gets written to the control
+ * register right here.
+ *
+ * FIXME: do not just handle memcpy, also handle slave DMA.
+ */
+ switch (pl08x->pd->memcpy_burst_size) {
+ default:
+ case PL08X_BURST_SZ_1:
+ val |= PL080_BSIZE_1 <<
+ FTDMAC020_CH_CSR_SRC_SIZE_SHIFT;
+ break;
+ case PL08X_BURST_SZ_4:
+ val |= PL080_BSIZE_4 <<
+ FTDMAC020_CH_CSR_SRC_SIZE_SHIFT;
+ break;
+ case PL08X_BURST_SZ_8:
+ val |= PL080_BSIZE_8 <<
+ FTDMAC020_CH_CSR_SRC_SIZE_SHIFT;
+ break;
+ case PL08X_BURST_SZ_16:
+ val |= PL080_BSIZE_16 <<
+ FTDMAC020_CH_CSR_SRC_SIZE_SHIFT;
+ break;
+ case PL08X_BURST_SZ_32:
+ val |= PL080_BSIZE_32 <<
+ FTDMAC020_CH_CSR_SRC_SIZE_SHIFT;
+ break;
+ case PL08X_BURST_SZ_64:
+ val |= PL080_BSIZE_64 <<
+ FTDMAC020_CH_CSR_SRC_SIZE_SHIFT;
+ break;
+ case PL08X_BURST_SZ_128:
+ val |= PL080_BSIZE_128 <<
+ FTDMAC020_CH_CSR_SRC_SIZE_SHIFT;
+ break;
+ case PL08X_BURST_SZ_256:
+ val |= PL080_BSIZE_256 <<
+ FTDMAC020_CH_CSR_SRC_SIZE_SHIFT;
+ break;
+ }
+
+ /* Protection flags */
+ if (pl08x->pd->memcpy_prot_buff)
+ val |= FTDMAC020_CH_CSR_PROT2;
+ if (pl08x->pd->memcpy_prot_cache)
+ val |= FTDMAC020_CH_CSR_PROT3;
+ /* We are the kernel, so we are in privileged mode */
+ val |= FTDMAC020_CH_CSR_PROT1;
+
+ writel_relaxed(val, phychan->reg_control);
+ } else {
+ /* Bits are just identical */
+ writel_relaxed(lli[PL080_LLI_CCTL], phychan->reg_control);
+ }
+ /* Second control word on the PL080s */
if (pl08x->vd->pl080s)
writel_relaxed(lli[PL080S_LLI_CCTL2],
phychan->base + PL080S_CH_CONTROL2);
@@ -423,11 +558,25 @@ static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan)
cpu_relax();
/* Do not access config register until channel shows as inactive */
- val = readl(phychan->reg_config);
- while ((val & PL080_CONFIG_ACTIVE) || (val & PL080_CONFIG_ENABLE))
+ if (phychan->ftdmac020) {
+ val = readl(phychan->reg_config);
+ while (val & FTDMAC020_CH_CFG_BUSY)
+ val = readl(phychan->reg_config);
+
+ val = readl(phychan->reg_control);
+ while (val & FTDMAC020_CH_CSR_EN)
+ val = readl(phychan->reg_control);
+
+ writel(val | FTDMAC020_CH_CSR_EN,
+ phychan->reg_control);
+ } else {
val = readl(phychan->reg_config);
+ while ((val & PL080_CONFIG_ACTIVE) ||
+ (val & PL080_CONFIG_ENABLE))
+ val = readl(phychan->reg_config);
- writel(val | PL080_CONFIG_ENABLE, phychan->reg_config);
+ writel(val | PL080_CONFIG_ENABLE, phychan->reg_config);
+ }
}
/*
@@ -445,6 +594,14 @@ static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch)
u32 val;
int timeout;
+ if (ch->ftdmac020) {
+ /* Use the enable bit on the FTDMAC020 */
+ val = readl(ch->reg_control);
+ val &= ~FTDMAC020_CH_CSR_EN;
+ writel(val, ch->reg_control);
+ return;
+ }
+
/* Set the HALT bit and wait for the FIFO to drain */
val = readl(ch->reg_config);
val |= PL080_CONFIG_HALT;
@@ -464,6 +621,14 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch)
{
u32 val;
+ /* Use the enable bit on the FTDMAC020 */
+ if (ch->ftdmac020) {
+ val = readl(ch->reg_control);
+ val |= FTDMAC020_CH_CSR_EN;
+ writel(val, ch->reg_control);
+ return;
+ }
+
/* Clear the HALT bit */
val = readl(ch->reg_config);
val &= ~PL080_CONFIG_HALT;
@@ -479,25 +644,68 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch)
static void pl08x_terminate_phy_chan(struct pl08x_driver_data *pl08x,
struct pl08x_phy_chan *ch)
{
- u32 val = readl(ch->reg_config);
+ u32 val;
+ /* The layout for the FTDMAC020 is different */
+ if (ch->ftdmac020) {
+ /* Disable all interrupts */
+ val = readl(ch->reg_config);
+ val |= (FTDMAC020_CH_CFG_INT_ABT_MASK |
+ FTDMAC020_CH_CFG_INT_ERR_MASK |
This diff is incomplete. Download the complete patch.
drivers/dma/bcm-sba-raid.c
View fileThis diff is incomplete. Download the complete patch.
drivers/dma/dw/platform.c
View fileThis diff is incomplete. Download the complete patch.
drivers/dma/fsl_raid.c
View fileThis diff is incomplete. Download the complete patch.
drivers/dma/fsldma.c
View fileThis diff is incomplete. Download the complete patch.
drivers/dma/fsldma.h
View fileThis diff is incomplete. Download the complete patch.
drivers/dma/imx-dma.c
View fileThis diff is incomplete. Download the complete patch.
drivers/dma/imx-sdma.c
View fileThis diff is incomplete. Download the complete patch.
drivers/dma/ioat/dca.c
View fileThis diff is incomplete. Download the complete patch.
drivers/dma/mv_xor_v2.c
View fileThis diff is incomplete. Download the complete patch.
drivers/dma/mxs-dma.c
View fileThis diff is incomplete. Download the complete patch.
drivers/dma/pl330.c
View fileThis diff is incomplete. Download the complete patch.
drivers/dma/qcom/hidma.c
View fileThis diff is incomplete. Download the complete patch.
drivers/dma/qcom/hidma.h
View fileThis diff is incomplete. Download the complete patch.
drivers/dma/qcom/hidma_mgmt.c
View fileThis diff is incomplete. Download the complete patch.
drivers/dma/sh/rcar-dmac.c
View fileThis diff is incomplete. Download the complete patch.
drivers/dma/ste_dma40.c
View fileThis diff is incomplete. Download the complete patch.
drivers/dma/tegra20-apb-dma.c
View fileThis diff is incomplete. Download the complete patch.
drivers/dma/xilinx/zynqmp_dma.c
View fileThis diff is incomplete. Download the complete patch.
include/linux/amba/pl080.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/amba/pl08x.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/raid/pq.h
View fileThis diff is incomplete. Download the complete patch.
lib/raid6/mktables.c
View fileThis diff is incomplete. Download the complete patch.