diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt
index ed838f4..6ae9d82 100644
--- a/Documentation/devicetree/bindings/chosen.txt
+++ b/Documentation/devicetree/bindings/chosen.txt
@@ -44,3 +44,11 @@ Implementation note: Linux will look for the property "linux,stdout-path" or
 on PowerPC "stdout" if "stdout-path" is not found.  However, the
 "linux,stdout-path" and "stdout" properties are deprecated. New platforms
 should only use the "stdout-path" property.
+
+linux,booted-from-kexec
+-----------------------
+
+This property is set (currently only on PowerPC, and only needed on
+book3e) by some versions of kexec-tools to tell the new kernel that it
+is being booted by kexec, as the booting environment may differ (e.g.
+a different secondary CPU release mechanism)
diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
index df4a259..16a3ec4 100644
--- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
+++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
@@ -1,6 +1,6 @@
 * Clock Block on Freescale QorIQ Platforms
 
-Freescale qoriq chips take primary clocking input from the external
+Freescale QorIQ chips take primary clocking input from the external
 SYSCLK signal. The SYSCLK input (frequency) is multiplied using
 multiple phase locked loops (PLL) to create a variety of frequencies
 which can then be passed to a variety of internal logic, including
@@ -13,14 +13,16 @@ which the chip complies.
 Chassis Version		Example Chips
 ---------------		-------------
 1.0			p4080, p5020, p5040
-2.0			t4240, b4860, t1040
+2.0			t4240, b4860
 
 1. Clock Block Binding
 
 Required properties:
-- compatible: Should contain a specific clock block compatible string
-	and a single chassis clock compatible string.
-	Clock block strings include, but not limited to, one of the:
+- compatible: Should contain a chip-specific clock block compatible
+	string and (if applicable) may contain a chassis-version clock
+	compatible string.
+
+	Chip-specific strings are of the form "fsl,<chip>-clockgen", such as:
 	* "fsl,p2041-clockgen"
 	* "fsl,p3041-clockgen"
 	* "fsl,p4080-clockgen"
@@ -30,15 +32,14 @@ Required properties:
 	* "fsl,b4420-clockgen"
 	* "fsl,b4860-clockgen"
 	* "fsl,ls1021a-clockgen"
-	Chassis clock strings include:
+	Chassis-version clock strings include:
 	* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
 	* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
 - reg: Describes the address of the device's resources within the
 	address space defined by its parent bus, and resource zero
 	represents the clock register set
-- clock-frequency: Input system clock frequency
 
-Recommended properties:
+Optional properties:
 - ranges: Allows valid translation between child's address space and
 	parent's. Must be present if the device has sub-nodes.
 - #address-cells: Specifies the number of cells used to represent
@@ -47,8 +48,46 @@ Recommended properties:
 - #size-cells: Specifies the number of cells used to represent
 	the size of an address. Must be present if the device has
 	sub-nodes and set to 1 if present
+- clock-frequency: Input system clock frequency (SYSCLK)
+- clocks: If clock-frequency is not specified, sysclk may be provided
+	as an input clock.  Either clock-frequency or clocks must be
+	provided.
+
+2. Clock Provider
+
+The clockgen node should act as a clock provider, though in older device
+trees the children of the clockgen node are the clock providers.
+
+When the clockgen node is a clock provider, #clock-cells = <2>.
+The first cell of the clock specifier is the clock type, and the
+second cell is the clock index for the specified type.
+
+	Type#	Name		Index Cell
+	0	sysclk		must be 0
+	1	cmux		index (n in CLKCnCSR)
+	2	hwaccel		index (n in CLKCGnHWACSR)
+	3	fman		0 for fm1, 1 for fm2
+	4	platform pll	0=pll, 1=pll/2, 2=pll/3, 3=pll/4
+
+3. Example
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+		clock-frequency = <133333333>;
+		reg = <0xe1000 0x1000>;
+		#clock-cells = <2>;
+	};
+
+	fman@400000 {
+		...
+		clocks = <&clockgen 3 0>;
+		...
+	};
+}
+4. Legacy Child Nodes
 
-2. Clock Provider/Consumer Binding
+NOTE: These nodes are deprecated.  Kernels should continue to support
+device trees with these nodes, but new device trees should not use them.
 
 Most of the bindings are from the common clock binding[1].
  [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -82,7 +121,7 @@ Recommended properties:
 - reg: Should be the offset and length of clock block base address.
 	The length should be 4.
 
-Example for clock block and clock provider:
+Legacy Example:
 / {
 	clockgen: global-utilities@e1000 {
 		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
@@ -142,7 +181,7 @@ Example for clock block and clock provider:
 	};
 };
 
-Example for clock consumer:
+Example for legacy clock consumer:
 
 / {
 	cpu0: PowerPC,e5500@0 {
diff --git a/Documentation/devicetree/bindings/net/maxim,ds26522.txt b/Documentation/devicetree/bindings/net/maxim,ds26522.txt
new file mode 100644
index 0000000..ee8bb72
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/maxim,ds26522.txt
@@ -0,0 +1,13 @@
+* Maxim (Dallas) DS26522 Dual T1/E1/J1 Transceiver
+
+Required properties:
+- compatible: Should contain "maxim,ds26522".
+- reg: SPI CS.
+- spi-max-frequency: SPI clock.
+
+Example:
+	slic@1 {
+		compatible = "maxim,ds26522";
+		reg = <1>;
+		spi-max-frequency = <2000000>; /* input clock */
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc512x_lpbfifo.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc512x_lpbfifo.txt
new file mode 100644
index 0000000..b3b392f
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc512x_lpbfifo.txt
@@ -0,0 +1,21 @@
+Freescale MPC512x LocalPlus Bus FIFO (called SCLPC in the Reference Manual)
+
+Required properties:
+- compatible: should be "fsl,mpc512x-lpbfifo";
+- reg: should contain the offset and length of SCLPC register set;
+- interrupts: should contain the interrupt specifier for SCLPC; syntax of an
+    interrupt client node is described in interrupt-controller/interrupts.txt;
+- dmas: should contain the DMA specifier for SCLPC as described at
+    dma/dma.txt and dma/mpc512x-dma.txt;
+- dma-names: should be "rx-tx";
+
+Example:
+
+	sclpc@10100 {
+		compatible = "fsl,mpc512x-lpbfifo";
+		reg = <0x10100 0x50>;
+		interrupts = <7 0x8>;
+		dmas = <&dma0 26>;
+		dma-names = "rx-tx";
+	};
+
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 9a7057e..db49e0d 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -419,7 +419,7 @@ config PPC64_SUPPORTS_MEMORY_FAILURE
 
 config KEXEC
 	bool "kexec system call"
-	depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP))
+	depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP)) || PPC_BOOK3E
 	select KEXEC_CORE
 	help
 	  kexec is a system call that implements the ability to shutdown your
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index b9b4af2..96efd82 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -157,8 +157,6 @@ CFLAGS-$(CONFIG_E500) += $(call cc-option,-mcpu=8540 -msoft-float,-mcpu=powerpc)
 endif
 endif
 
-CFLAGS-$(CONFIG_TUNE_CELL) += $(call cc-option,-mtune=cell)
-
 asinstr := $(call as-instr,lis 9$(comma)foo@high,-DHAVE_AS_ATHIGH=1)
 
 KBUILD_CPPFLAGS	+= -Iarch/$(ARCH) $(asinstr)
@@ -288,6 +286,10 @@ PHONY += pseries_le_defconfig
 pseries_le_defconfig:
 	$(call merge_into_defconfig,pseries_defconfig,le)
 
+PHONY += ppc64le_defconfig
+ppc64le_defconfig:
+	$(call merge_into_defconfig,ppc64_defconfig,le)
+
 PHONY += mpc85xx_defconfig
 mpc85xx_defconfig:
 	$(call merge_into_defconfig,mpc85xx_basic_defconfig,\
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 4eec430..99e4487 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -364,6 +364,9 @@ $(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
 $(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
 	$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
 
+$(obj)/cuImage.%: vmlinux $(obj)/fsl/%.dtb $(wrapperbits)
+	$(call if_changed,wrap,cuboot-$*,,$(obj)/fsl/$*.dtb)
+
 $(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
 	$(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
 
diff --git a/arch/powerpc/boot/dts/b4420qds.dts b/arch/powerpc/boot/dts/fsl/b4420qds.dts
similarity index 95%
rename from arch/powerpc/boot/dts/b4420qds.dts
rename to arch/powerpc/boot/dts/fsl/b4420qds.dts
index 508dbdf..cd9203c 100644
--- a/arch/powerpc/boot/dts/b4420qds.dts
+++ b/arch/powerpc/boot/dts/fsl/b4420qds.dts
@@ -32,7 +32,7 @@
  * this software, even if advised of the possibility of such damage.
  */
 
-/include/ "fsl/b4420si-pre.dtsi"
+/include/ "b4420si-pre.dtsi"
 /include/ "b4qds.dtsi"
 
 / {
@@ -47,4 +47,4 @@
 
 };
 
-/include/ "fsl/b4420si-post.dtsi"
+/include/ "b4420si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
index 1ea8602..f996cce 100644
--- a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
@@ -89,7 +89,9 @@
 		compatible = "fsl,b4420-rcpm", "fsl,qoriq-rcpm-2.0";
 	};
 
-	L2: l2-cache-controller@c20000 {
+	L2_1: l2-cache-controller@c20000 {
 		compatible = "fsl,b4420-l2-cache-controller";
+		reg = <0xc20000 0x40000>;
+		next-level-cache = <&cpc>;
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
index 338af7e..bc3bf93 100644
--- a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
@@ -1,7 +1,7 @@
 /*
  * B4420 Silicon/SoC Device Tree Source (pre include)
  *
- * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor, Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -54,8 +54,13 @@
 		dma0 = &dma0;
 		dma1 = &dma1;
 		sdhc = &sdhc;
-	};
 
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+	};
 
 	cpus {
 		#address-cells = <1>;
@@ -65,14 +70,14 @@
 			device_type = "cpu";
 			reg = <0 1>;
 			clocks = <&mux0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu1: PowerPC,e6500@2 {
 			device_type = "cpu";
 			reg = <2 3>;
 			clocks = <&mux0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/b4860qds.dts b/arch/powerpc/boot/dts/fsl/b4860qds.dts
similarity index 96%
rename from arch/powerpc/boot/dts/b4860qds.dts
rename to arch/powerpc/boot/dts/fsl/b4860qds.dts
index 6bb3707..ba8c9be 100644
--- a/arch/powerpc/boot/dts/b4860qds.dts
+++ b/arch/powerpc/boot/dts/fsl/b4860qds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/b4860si-pre.dtsi"
+/include/ "b4860si-pre.dtsi"
 /include/ "b4qds.dtsi"
 
 / {
@@ -58,4 +58,4 @@
 
 };
 
-/include/ "fsl/b4860si-post.dtsi"
+/include/ "b4860si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
index 9ba904b..8687198 100644
--- a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
@@ -1,7 +1,7 @@
 /*
  * B4860 Silicon/SoC Device Tree Source (post include)
  *
- * Copyright 2012 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -51,14 +51,12 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 		cell-index = <1>;
-		fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
 	};
 
 	port2 {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		cell-index = <2>;
-		fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
 	};
 };
 
@@ -260,7 +258,27 @@
 		compatible = "fsl,b4860-rcpm", "fsl,qoriq-rcpm-2.0";
 	};
 
-	L2: l2-cache-controller@c20000 {
+/include/ "qoriq-fman3-0-1g-4.dtsi"
+/include/ "qoriq-fman3-0-1g-5.dtsi"
+/include/ "qoriq-fman3-0-10g-0.dtsi"
+/include/ "qoriq-fman3-0-10g-1.dtsi"
+	fman@400000 {
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@ea000 {
+		};
+
+		enet6: ethernet@f0000 {
+		};
+
+		enet7: ethernet@f2000 {
+		};
+	};
+
+	L2_1: l2-cache-controller@c20000 {
 		compatible = "fsl,b4860-l2-cache-controller";
+		reg = <0xc20000 0x40000>;
+		next-level-cache = <&cpc>;
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
index 1948f73..8797ce1 100644
--- a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
@@ -1,7 +1,7 @@
 /*
  * B4860 Silicon/SoC Device Tree Source (pre include)
  *
- * Copyright 2012 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -54,6 +54,16 @@
 		dma0 = &dma0;
 		dma1 = &dma1;
 		sdhc = &sdhc;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
 	};
 
 
@@ -65,28 +75,28 @@
 			device_type = "cpu";
 			reg = <0 1>;
 			clocks = <&mux0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu1: PowerPC,e6500@2 {
 			device_type = "cpu";
 			reg = <2 3>;
 			clocks = <&mux0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu2: PowerPC,e6500@4 {
 			device_type = "cpu";
 			reg = <4 5>;
 			clocks = <&mux0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu3: PowerPC,e6500@6 {
 			device_type = "cpu";
 			reg = <6 7>;
 			clocks = <&mux0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/b4qds.dtsi b/arch/powerpc/boot/dts/fsl/b4qds.dtsi
similarity index 99%
rename from arch/powerpc/boot/dts/b4qds.dtsi
rename to arch/powerpc/boot/dts/fsl/b4qds.dtsi
index 559d006..6455774 100644
--- a/arch/powerpc/boot/dts/b4qds.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4qds.dtsi
@@ -229,4 +229,4 @@
 
 };
 
-/include/ "fsl/b4si-post.dtsi"
+/include/ "b4si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
index 603910a..74866ac 100644
--- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
@@ -1,7 +1,7 @@
 /*
  * B4420 Silicon/SoC Device Tree Source (post include)
  *
- * Copyright 2012 - 2014 Freescale Semiconductor, Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor, Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -466,9 +466,32 @@
 		interrupts = <16 2 1 29>;
 	};
 
-	L2: l2-cache-controller@c20000 {
-		compatible = "fsl,b4-l2-cache-controller";
-		reg = <0xc20000 0x1000>;
-		next-level-cache = <&cpc>;
+/include/ "qoriq-fman3-0.dtsi"
+/include/ "qoriq-fman3-0-1g-0.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+	fman@400000 {
+		interrupts = <96 2 0 0>, <16 2 1 30>;
+
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		mdio@fc000 {
+			interrupts = <100 1 0 0>;
+		};
+
+		mdio@fd000 {
+			interrupts = <101 1 0 0>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dts b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts
similarity index 92%
rename from arch/powerpc/boot/dts/bsc9131rdb.dts
rename to arch/powerpc/boot/dts/fsl/bsc9131rdb.dts
index e13d2d4..26366e6 100644
--- a/arch/powerpc/boot/dts/bsc9131rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/bsc9131si-pre.dtsi"
+/include/ "bsc9131si-pre.dtsi"
 
 / {
 	model = "fsl,bsc9131rdb";
@@ -31,4 +31,4 @@
 };
 
 /include/ "bsc9131rdb.dtsi"
-/include/ "fsl/bsc9131si-post.dtsi"
+/include/ "bsc9131si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi
similarity index 93%
rename from arch/powerpc/boot/dts/bsc9131rdb.dtsi
rename to arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi
index 45efcba..f4d96d2 100644
--- a/arch/powerpc/boot/dts/bsc9131rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi
@@ -80,6 +80,18 @@
 		status = "disabled";
 	};
 
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <5>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0xcccccccd>;
+		fsl,tmr-fiper1	= <999999995>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <249999999>;
+	};
+
 	enet0: ethernet@b0000 {
 		phy-handle = <&phy0>;
 		phy-connection-type = "rgmii-id";
diff --git a/arch/powerpc/boot/dts/bsc9132qds.dts b/arch/powerpc/boot/dts/fsl/bsc9132qds.dts
similarity index 93%
rename from arch/powerpc/boot/dts/bsc9132qds.dts
rename to arch/powerpc/boot/dts/fsl/bsc9132qds.dts
index 6cab106..70882ad 100644
--- a/arch/powerpc/boot/dts/bsc9132qds.dts
+++ b/arch/powerpc/boot/dts/fsl/bsc9132qds.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/bsc9132si-pre.dtsi"
+/include/ "bsc9132si-pre.dtsi"
 
 / {
 	model = "fsl,bsc9132qds";
@@ -32,4 +32,4 @@
 };
 
 /include/ "bsc9132qds.dtsi"
-/include/ "fsl/bsc9132si-post.dtsi"
+/include/ "bsc9132si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/bsc9132qds.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi
similarity index 94%
rename from arch/powerpc/boot/dts/bsc9132qds.dtsi
rename to arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi
index af8e888..7a13bf2 100644
--- a/arch/powerpc/boot/dts/bsc9132qds.dtsi
+++ b/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi
@@ -87,6 +87,18 @@
 		};
 	};
 
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <5>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0xcccccccd>;
+		fsl,tmr-fiper1	= <999999995>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <249999999>;
+	};
+
 	enet0: ethernet@b0000 {
 		phy-handle = <&phy0>;
 		tbi-handle = <&tbi0>;
diff --git a/arch/powerpc/boot/dts/c293pcie.dts b/arch/powerpc/boot/dts/fsl/c293pcie.dts
similarity index 98%
rename from arch/powerpc/boot/dts/c293pcie.dts
rename to arch/powerpc/boot/dts/fsl/c293pcie.dts
index 6681cc2..53ab4db 100644
--- a/arch/powerpc/boot/dts/c293pcie.dts
+++ b/arch/powerpc/boot/dts/fsl/c293pcie.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/c293si-pre.dtsi"
+/include/ "c293si-pre.dtsi"
 
 / {
 	model = "fsl,C293PCIE";
@@ -221,4 +221,4 @@
 		phy-connection-type = "rgmii-id";
 	};
 };
-/include/ "fsl/c293si-post.dtsi"
+/include/ "c293si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/cyrus_p5020.dts b/arch/powerpc/boot/dts/fsl/cyrus_p5020.dts
new file mode 100644
index 0000000..c603390
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/cyrus_p5020.dts
@@ -0,0 +1,155 @@
+/*
+ * Cyrus 5020 Device Tree Source, based on p5020ds.dts
+ *
+ * Copyright 2015 Andy Fleming
+ *
+ * p5020ds.dts copyright:
+ * Copyright 2010 - 2014 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p5020si-pre.dtsi"
+
+/ {
+	model = "varisys,CYRUS";
+	compatible = "varisys,CYRUS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x200000>;
+	};
+
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+		};
+
+		i2c@118100 {
+		};
+
+		i2c@119100 {
+			rtc@6f {
+				compatible = "microchip,mcp7941x";
+				reg = <0x6f>;
+			};
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xffa00000 0x00040000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		reg = <0xf 0xfe201000 0 0x1000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe203000 {
+		reg = <0xf 0xfe203000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "p5020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/ge_imp3a.dts b/arch/powerpc/boot/dts/fsl/ge_imp3a.dts
similarity index 98%
rename from arch/powerpc/boot/dts/ge_imp3a.dts
rename to arch/powerpc/boot/dts/fsl/ge_imp3a.dts
index fefae41..a2bb47f 100644
--- a/arch/powerpc/boot/dts/ge_imp3a.dts
+++ b/arch/powerpc/boot/dts/fsl/ge_imp3a.dts
@@ -12,7 +12,7 @@
  * Copyright 2009 Freescale Semiconductor Inc.
  */
 
-/include/ "fsl/p2020si-pre.dtsi"
+/include/ "p2020si-pre.dtsi"
 
 / {
 	model = "GE_IMP3A";
@@ -252,4 +252,4 @@
 	};
 };
 
-/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/kmcoge4.dts b/arch/powerpc/boot/dts/fsl/kmcoge4.dts
similarity index 98%
rename from arch/powerpc/boot/dts/kmcoge4.dts
rename to arch/powerpc/boot/dts/fsl/kmcoge4.dts
index 48dab6a..6858ec9 100644
--- a/arch/powerpc/boot/dts/kmcoge4.dts
+++ b/arch/powerpc/boot/dts/fsl/kmcoge4.dts
@@ -12,7 +12,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/p2041si-pre.dtsi"
+/include/ "p2041si-pre.dtsi"
 
 / {
 	model = "keymile,kmcoge4";
@@ -176,4 +176,4 @@
 	};
 };
 
-/include/ "fsl/p2041si-post.dtsi"
+/include/ "p2041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/fsl/mpc8536ds.dts
similarity index 97%
rename from arch/powerpc/boot/dts/mpc8536ds.dts
rename to arch/powerpc/boot/dts/fsl/mpc8536ds.dts
index 1973622..96cdce8 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8536ds.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/mpc8536si-pre.dtsi"
+/include/ "mpc8536si-pre.dtsi"
 
 / {
 	model = "fsl,mpc8536ds";
@@ -105,5 +105,5 @@
 	};
 };
 
-/include/ "fsl/mpc8536si-post.dtsi"
+/include/ "mpc8536si-post.dtsi"
 /include/ "mpc8536ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/mpc8536ds.dtsi
rename to arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi
diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8536ds_36b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/mpc8536ds_36b.dts
rename to arch/powerpc/boot/dts/fsl/mpc8536ds_36b.dts
index 6c723ee..38d326c 100644
--- a/arch/powerpc/boot/dts/mpc8536ds_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8536ds_36b.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/mpc8536si-pre.dtsi"
+/include/ "mpc8536si-pre.dtsi"
 
 / {
 	model = "fsl,mpc8536ds";
@@ -105,5 +105,5 @@
 	};
 };
 
-/include/ "fsl/mpc8536si-post.dtsi"
+/include/ "mpc8536si-post.dtsi"
 /include/ "mpc8536ds.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
index c8b2daa..4193570 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
@@ -172,7 +172,7 @@
 
 	/* mark compat w/8572 to get some erratum treatment */
 	gpio-controller@f000 {
-		compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
+		compatible = "fsl,mpc8572-gpio";
 	};
 
 	sata@18000 {
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/fsl/mpc8540ads.dts
similarity index 99%
rename from arch/powerpc/boot/dts/mpc8540ads.dts
rename to arch/powerpc/boot/dts/fsl/mpc8540ads.dts
index 7ce274c..e6d0b16 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8540ads.dts
@@ -11,7 +11,7 @@
 
 /dts-v1/;
 
-/include/ "fsl/e500v2_power_isa.dtsi"
+/include/ "e500v2_power_isa.dtsi"
 
 / {
 	model = "MPC8540ADS";
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/fsl/mpc8541cds.dts
similarity index 99%
rename from arch/powerpc/boot/dts/mpc8541cds.dts
rename to arch/powerpc/boot/dts/fsl/mpc8541cds.dts
index 4d35a3e..9fa2c73 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8541cds.dts
@@ -11,7 +11,7 @@
 
 /dts-v1/;
 
-/include/ "fsl/e500v2_power_isa.dtsi"
+/include/ "e500v2_power_isa.dtsi"
 
 / {
 	model = "MPC8541CDS";
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/fsl/mpc8544ds.dts
similarity index 97%
rename from arch/powerpc/boot/dts/mpc8544ds.dts
rename to arch/powerpc/boot/dts/fsl/mpc8544ds.dts
index ed38874..5a6e468 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8544ds.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/mpc8544si-pre.dtsi"
+/include/ "mpc8544si-pre.dtsi"
 
 / {
 	model = "MPC8544DS";
@@ -103,5 +103,5 @@
  * for interrupt-map & interrupt-map-mask
  */
 
-/include/ "fsl/mpc8544si-post.dtsi"
+/include/ "mpc8544si-post.dtsi"
 /include/ "mpc8544ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/mpc8544ds.dtsi
rename to arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548cds.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/mpc8548cds.dtsi
rename to arch/powerpc/boot/dts/fsl/mpc8548cds.dtsi
diff --git a/arch/powerpc/boot/dts/mpc8548cds_32b.dts b/arch/powerpc/boot/dts/fsl/mpc8548cds_32b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/mpc8548cds_32b.dts
rename to arch/powerpc/boot/dts/fsl/mpc8548cds_32b.dts
index 6fd6316..e4620bb 100644
--- a/arch/powerpc/boot/dts/mpc8548cds_32b.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8548cds_32b.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/mpc8548si-pre.dtsi"
+/include/ "mpc8548si-pre.dtsi"
 
 / {
 	model = "MPC8548CDS";
@@ -82,5 +82,5 @@
  * for interrupt-map & interrupt-map-mask.
  */
 
-/include/ "fsl/mpc8548si-post.dtsi"
+/include/ "mpc8548si-post.dtsi"
 /include/ "mpc8548cds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8548cds_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8548cds_36b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/mpc8548cds_36b.dts
rename to arch/powerpc/boot/dts/fsl/mpc8548cds_36b.dts
index 10e551b..bca7c09 100644
--- a/arch/powerpc/boot/dts/mpc8548cds_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8548cds_36b.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/mpc8548si-pre.dtsi"
+/include/ "mpc8548si-pre.dtsi"
 
 / {
 	model = "MPC8548CDS";
@@ -82,5 +82,5 @@
  * for interrupt-map & interrupt-map-mask.
  */
 
-/include/ "fsl/mpc8548si-post.dtsi"
+/include/ "mpc8548si-post.dtsi"
 /include/ "mpc8548cds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/fsl/mpc8555cds.dts
similarity index 99%
rename from arch/powerpc/boot/dts/mpc8555cds.dts
rename to arch/powerpc/boot/dts/fsl/mpc8555cds.dts
index f115f21..272f08c 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8555cds.dts
@@ -11,7 +11,7 @@
 
 /dts-v1/;
 
-/include/ "fsl/e500v2_power_isa.dtsi"
+/include/ "e500v2_power_isa.dtsi"
 
 / {
 	model = "MPC8555CDS";
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/fsl/mpc8560ads.dts
similarity index 99%
rename from arch/powerpc/boot/dts/mpc8560ads.dts
rename to arch/powerpc/boot/dts/fsl/mpc8560ads.dts
index 0d70921..7a822b0 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8560ads.dts
@@ -11,7 +11,7 @@
 
 /dts-v1/;
 
-/include/ "fsl/e500v2_power_isa.dtsi"
+/include/ "e500v2_power_isa.dtsi"
 
 / {
 	model = "MPC8560ADS";
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/fsl/mpc8568mds.dts
similarity index 98%
rename from arch/powerpc/boot/dts/mpc8568mds.dts
rename to arch/powerpc/boot/dts/fsl/mpc8568mds.dts
index bead2b6..01706a3 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8568mds.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/mpc8568si-pre.dtsi"
+/include/ "mpc8568si-pre.dtsi"
 
 / {
 	model = "MPC8568EMDS";
@@ -311,4 +311,4 @@
 	};
 };
 
-/include/ "fsl/mpc8568si-post.dtsi"
+/include/ "mpc8568si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/fsl/mpc8569mds.dts
similarity index 99%
rename from arch/powerpc/boot/dts/mpc8569mds.dts
rename to arch/powerpc/boot/dts/fsl/mpc8569mds.dts
index d0dcdaf..a95ff7d 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8569mds.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/mpc8569si-pre.dtsi"
+/include/ "mpc8569si-pre.dtsi"
 
 / {
 	model = "MPC8569EMDS";
@@ -444,4 +444,4 @@
 	};
 };
 
-/include/ "fsl/mpc8569si-post.dtsi"
+/include/ "mpc8569si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds.dts
similarity index 97%
rename from arch/powerpc/boot/dts/mpc8572ds.dts
rename to arch/powerpc/boot/dts/fsl/mpc8572ds.dts
index 0c9f295..8ee5b24 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8572ds.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/mpc8572si-pre.dtsi"
+/include/ "mpc8572si-pre.dtsi"
 
 / {
 	model = "fsl,MPC8572DS";
@@ -86,5 +86,5 @@
  * for interrupt-map & interrupt-map-mask
  */
 
-/include/ "fsl/mpc8572si-post.dtsi"
+/include/ "mpc8572si-post.dtsi"
 /include/ "mpc8572ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/mpc8572ds.dtsi
rename to arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi
diff --git a/arch/powerpc/boot/dts/mpc8572ds_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/mpc8572ds_36b.dts
rename to arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dts
index 6c3d0b3..5c48b46 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/mpc8572si-pre.dtsi"
+/include/ "mpc8572si-pre.dtsi"
 
 / {
 	model = "fsl,MPC8572DS";
@@ -86,5 +86,5 @@
  * for interrupt-map & interrupt-map-mask
  */
 
-/include/ "fsl/mpc8572si-post.dtsi"
+/include/ "mpc8572si-post.dtsi"
 /include/ "mpc8572ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dts
similarity index 100%
rename from arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
rename to arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dts
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dts
similarity index 100%
rename from arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
rename to arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dts
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
index d44e25a..49294cf 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
@@ -162,7 +162,7 @@
 /include/ "pq3-dma-1.dtsi"
 /include/ "pq3-gpio-0.dtsi"
 	gpio-controller@f000 {
-		compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
+		compatible = "fsl,mpc8572-gpio";
 	};
 
 	L2: l2-cache-controller@20000 {
diff --git a/arch/powerpc/boot/dts/mvme2500.dts b/arch/powerpc/boot/dts/fsl/mvme2500.dts
similarity index 97%
rename from arch/powerpc/boot/dts/mvme2500.dts
rename to arch/powerpc/boot/dts/fsl/mvme2500.dts
index 67714cf..c7bc1a0 100644
--- a/arch/powerpc/boot/dts/mvme2500.dts
+++ b/arch/powerpc/boot/dts/fsl/mvme2500.dts
@@ -12,7 +12,7 @@
  * Copyright 2009 Freescale Semiconductor Inc.
  */
 
-/include/ "fsl/p2020si-pre.dtsi"
+/include/ "p2020si-pre.dtsi"
 
 / {
 	model = "MVME2500";
@@ -258,7 +258,7 @@
 	};
 };
 
-/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020si-post.dtsi"
 
 / {
 	soc@ffe00000 {
diff --git a/arch/powerpc/boot/dts/oca4080.dts b/arch/powerpc/boot/dts/fsl/oca4080.dts
similarity index 98%
rename from arch/powerpc/boot/dts/oca4080.dts
rename to arch/powerpc/boot/dts/fsl/oca4080.dts
index 42796c5..17bc6f3 100644
--- a/arch/powerpc/boot/dts/oca4080.dts
+++ b/arch/powerpc/boot/dts/fsl/oca4080.dts
@@ -36,7 +36,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p4080si-pre.dtsi"
+/include/ "p4080si-pre.dtsi"
 
 / {
 	model = "fsl,OCA4080";
@@ -142,4 +142,4 @@
 	};
 };
 
-/include/ "fsl/p4080si-post.dtsi"
+/include/ "p4080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb-pa.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dts
similarity index 89%
rename from arch/powerpc/boot/dts/p1010rdb-pa.dts
rename to arch/powerpc/boot/dts/fsl/p1010rdb-pa.dts
index 767d4c0..e4ab53c 100644
--- a/arch/powerpc/boot/dts/p1010rdb-pa.dts
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/p1010si-pre.dtsi"
+/include/ "p1010si-pre.dtsi"
 
 / {
 	model = "fsl,P1010RDB";
@@ -20,4 +20,4 @@
 
 /include/ "p1010rdb.dtsi"
 /include/ "p1010rdb-pa.dtsi"
-/include/ "fsl/p1010si-post.dtsi"
+/include/ "p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb-pa.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1010rdb-pa.dtsi
rename to arch/powerpc/boot/dts/fsl/p1010rdb-pa.dtsi
diff --git a/arch/powerpc/boot/dts/p1010rdb-pa_36b.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pa_36b.dts
similarity index 95%
rename from arch/powerpc/boot/dts/p1010rdb-pa_36b.dts
rename to arch/powerpc/boot/dts/fsl/p1010rdb-pa_36b.dts
index 3033371..03bd76c 100644
--- a/arch/powerpc/boot/dts/p1010rdb-pa_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pa_36b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1010si-pre.dtsi"
+/include/ "p1010si-pre.dtsi"
 
 / {
 	model = "fsl,P1010RDB";
@@ -43,4 +43,4 @@
 
 /include/ "p1010rdb.dtsi"
 /include/ "p1010rdb-pa.dtsi"
-/include/ "fsl/p1010si-post.dtsi"
+/include/ "p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb-pb.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts
similarity index 92%
rename from arch/powerpc/boot/dts/p1010rdb-pb.dts
rename to arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts
index 6eeb7d3..37681fd 100644
--- a/arch/powerpc/boot/dts/p1010rdb-pb.dts
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/p1010si-pre.dtsi"
+/include/ "p1010si-pre.dtsi"
 
 / {
 	model = "fsl,P1010RDB-PB";
@@ -32,4 +32,4 @@
 	interrupts = <1 1 0 0>;
 };
 
-/include/ "fsl/p1010si-post.dtsi"
+/include/ "p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts
similarity index 96%
rename from arch/powerpc/boot/dts/p1010rdb-pb_36b.dts
rename to arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts
index 7ab3c90..4cf255f 100644
--- a/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1010si-pre.dtsi"
+/include/ "p1010si-pre.dtsi"
 
 / {
 	model = "fsl,P1010RDB-PB";
@@ -55,4 +55,4 @@
 	interrupts = <1 1 0 0>;
 };
 
-/include/ "fsl/p1010si-post.dtsi"
+/include/ "p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
similarity index 94%
rename from arch/powerpc/boot/dts/p1010rdb.dtsi
rename to arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
index ea534ef..0f0ced6 100644
--- a/arch/powerpc/boot/dts/p1010rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
@@ -186,6 +186,18 @@
 		};
 	};
 
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <10>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0x80000016>;
+		fsl,tmr-fiper1	= <999999990>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <199999999>;
+	};
+
 	enet0: ethernet@b0000 {
 		phy-handle = <&phy0>;
 		phy-connection-type = "rgmii-id";
diff --git a/arch/powerpc/boot/dts/p1010rdb_32b.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1010rdb_32b.dtsi
rename to arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi
diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1010rdb_36b.dtsi
rename to arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi
diff --git a/arch/powerpc/boot/dts/p1020mbg-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1020mbg-pc.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1020mbg-pc.dtsi
rename to arch/powerpc/boot/dts/fsl/p1020mbg-pc.dtsi
diff --git a/arch/powerpc/boot/dts/p1020mbg-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_32b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1020mbg-pc_32b.dts
rename to arch/powerpc/boot/dts/fsl/p1020mbg-pc_32b.dts
index ab8f076..b29d1fc 100644
--- a/arch/powerpc/boot/dts/p1020mbg-pc_32b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_32b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1020MBG-PC";
 	compatible = "fsl,P1020MBG-PC";
@@ -86,4 +86,4 @@
 };
 
 /include/ "p1020mbg-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020mbg-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_36b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1020mbg-pc_36b.dts
rename to arch/powerpc/boot/dts/fsl/p1020mbg-pc_36b.dts
index 9e9f401..678d0ee 100644
--- a/arch/powerpc/boot/dts/p1020mbg-pc_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_36b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1020MBG-PC";
 	compatible = "fsl,P1020MBG-PC";
@@ -86,4 +86,4 @@
 };
 
 /include/ "p1020mbg-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1020rdb-pc.dtsi
rename to arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi
diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1020rdb-pc_32b.dts
rename to arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dts
index 4de69b7..8175bf6 100644
--- a/arch/powerpc/boot/dts/p1020rdb-pc_32b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1020RDB-PC";
 	compatible = "fsl,P1020RDB-PC";
@@ -87,4 +87,4 @@
 };
 
 /include/ "p1020rdb-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1020rdb-pc_36b.dts
rename to arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dts
index 5237da7..01c3057 100644
--- a/arch/powerpc/boot/dts/p1020rdb-pc_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1020RDB-PC";
 	compatible = "fsl,P1020RDB-PC";
@@ -87,4 +87,4 @@
 };
 
 /include/ "p1020rdb-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dts
similarity index 100%
rename from arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts
rename to arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dts
diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dts
similarity index 100%
rename from arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts
rename to arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dts
diff --git a/arch/powerpc/boot/dts/p1020rdb-pd.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts
similarity index 91%
rename from arch/powerpc/boot/dts/p1020rdb-pd.dts
rename to arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts
index 987017e..740553c 100644
--- a/arch/powerpc/boot/dts/p1020rdb-pd.dts
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1020RDB-PD";
 	compatible = "fsl,P1020RDB-PD";
@@ -225,6 +225,18 @@
 			};
 		};
 
+		ptp_clock@b0e00 {
+			compatible = "fsl,etsec-ptp";
+			reg = <0xb0e00 0xb0>;
+			interrupts = <68 2 0 0 69 2 0 0>;
+			fsl,tclk-period	= <10>;
+			fsl,tmr-prsc	= <2>;
+			fsl,tmr-add	= <0x80000016>;
+			fsl,tmr-fiper1	= <999999990>;
+			fsl,tmr-fiper2	= <99990>;
+			fsl,max-adj	= <199999999>;
+		};
+
 		enet0: ethernet@b0000 {
 			fixed-link = <1 1 1000 0 0>;
 			phy-connection-type = "rgmii-id";
@@ -277,4 +289,4 @@
 	};
 };
 
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/fsl/p1020rdb.dts
similarity index 96%
rename from arch/powerpc/boot/dts/p1020rdb.dts
rename to arch/powerpc/boot/dts/fsl/p1020rdb.dts
index 518bf99..8136225 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1020RDB";
 	compatible = "fsl,P1020RDB";
@@ -63,4 +63,4 @@
 };
 
 /include/ "p1020rdb.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1020rdb.dtsi
rename to arch/powerpc/boot/dts/fsl/p1020rdb.dtsi
diff --git a/arch/powerpc/boot/dts/p1020rdb_36b.dts b/arch/powerpc/boot/dts/fsl/p1020rdb_36b.dts
similarity index 96%
rename from arch/powerpc/boot/dts/p1020rdb_36b.dts
rename to arch/powerpc/boot/dts/fsl/p1020rdb_36b.dts
index bdbdb60..74471e3 100644
--- a/arch/powerpc/boot/dts/p1020rdb_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb_36b.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1020RDB";
 	compatible = "fsl,P1020RDB";
@@ -63,4 +63,4 @@
 };
 
 /include/ "p1020rdb.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020utm-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1020utm-pc.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1020utm-pc.dtsi
rename to arch/powerpc/boot/dts/fsl/p1020utm-pc.dtsi
diff --git a/arch/powerpc/boot/dts/p1020utm-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1020utm-pc_32b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1020utm-pc_32b.dts
rename to arch/powerpc/boot/dts/fsl/p1020utm-pc_32b.dts
index 4bfdd89..bc03ef6 100644
--- a/arch/powerpc/boot/dts/p1020utm-pc_32b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1020utm-pc_32b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1020UTM-PC";
 	compatible = "fsl,P1020UTM-PC";
@@ -86,4 +86,4 @@
 };
 
 /include/ "p1020utm-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020utm-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1020utm-pc_36b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1020utm-pc_36b.dts
rename to arch/powerpc/boot/dts/fsl/p1020utm-pc_36b.dts
index abec535..32766f6 100644
--- a/arch/powerpc/boot/dts/p1020utm-pc_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1020utm-pc_36b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1020UTM-PC";
 	compatible = "fsl,P1020UTM-PC";
@@ -86,4 +86,4 @@
 };
 
 /include/ "p1020utm-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/fsl/p1021mds.dts
similarity index 98%
rename from arch/powerpc/boot/dts/p1021mds.dts
rename to arch/powerpc/boot/dts/fsl/p1021mds.dts
index 7655904..27fdfd7 100644
--- a/arch/powerpc/boot/dts/p1021mds.dts
+++ b/arch/powerpc/boot/dts/fsl/p1021mds.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/p1021si-pre.dtsi"
+/include/ "p1021si-pre.dtsi"
 / {
 	model = "fsl,P1021";
 	compatible = "fsl,P1021MDS";
@@ -320,4 +320,4 @@
 	};
 };
 
-/include/ "fsl/p1021si-post.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1021rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi
similarity index 96%
rename from arch/powerpc/boot/dts/p1021rdb-pc.dtsi
rename to arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi
index d6274c5..e8a0f95 100644
--- a/arch/powerpc/boot/dts/p1021rdb-pc.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi
@@ -224,6 +224,18 @@
 		};
 	};
 
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <10>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0x80000016>;
+		fsl,tmr-fiper1	= <999999990>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <199999999>;
+	};
+
 	enet0: ethernet@b0000 {
 		fixed-link = <1 1 1000 0 0>;
 		phy-connection-type = "rgmii-id";
diff --git a/arch/powerpc/boot/dts/p1021rdb-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_32b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1021rdb-pc_32b.dts
rename to arch/powerpc/boot/dts/fsl/p1021rdb-pc_32b.dts
index 7cefa12..d2b4710 100644
--- a/arch/powerpc/boot/dts/p1021rdb-pc_32b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_32b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1021si-pre.dtsi"
+/include/ "p1021si-pre.dtsi"
 / {
 	model = "fsl,P1021RDB";
 	compatible = "fsl,P1021RDB-PC";
@@ -93,4 +93,4 @@
 };
 
 /include/ "p1021rdb-pc.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1021rdb-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_36b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1021rdb-pc_36b.dts
rename to arch/powerpc/boot/dts/fsl/p1021rdb-pc_36b.dts
index 53d0c88..e298c29 100644
--- a/arch/powerpc/boot/dts/p1021rdb-pc_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_36b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1021si-pre.dtsi"
+/include/ "p1021si-pre.dtsi"
 / {
 	model = "fsl,P1021RDB";
 	compatible = "fsl,P1021RDB-PC";
@@ -93,4 +93,4 @@
 };
 
 /include/ "p1021rdb-pc.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1022ds.dtsi b/arch/powerpc/boot/dts/fsl/p1022ds.dtsi
similarity index 93%
rename from arch/powerpc/boot/dts/p1022ds.dtsi
rename to arch/powerpc/boot/dts/fsl/p1022ds.dtsi
index 957e0dc..149da0f 100644
--- a/arch/powerpc/boot/dts/p1022ds.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1022ds.dtsi
@@ -215,6 +215,18 @@
 		};
 	};
 
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <5>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0xc01ebd3d>;
+		fsl,tmr-fiper1	= <999999995>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <266499999>;
+	};
+
 	ethernet@b0000 {
 		phy-handle = <&phy0>;
 		phy-connection-type = "rgmii-id";
diff --git a/arch/powerpc/boot/dts/p1022ds_32b.dts b/arch/powerpc/boot/dts/fsl/p1022ds_32b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1022ds_32b.dts
rename to arch/powerpc/boot/dts/fsl/p1022ds_32b.dts
index d96cae0..5a7eace 100644
--- a/arch/powerpc/boot/dts/p1022ds_32b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1022ds_32b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1022si-pre.dtsi"
+/include/ "p1022si-pre.dtsi"
 / {
 	model = "fsl,P1022DS";
 	compatible = "fsl,P1022DS";
@@ -99,5 +99,5 @@
 	};
 };
 
-/include/ "fsl/p1022si-post.dtsi"
+/include/ "p1022si-post.dtsi"
 /include/ "p1022ds.dtsi"
diff --git a/arch/powerpc/boot/dts/p1022ds_36b.dts b/arch/powerpc/boot/dts/fsl/p1022ds_36b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1022ds_36b.dts
rename to arch/powerpc/boot/dts/fsl/p1022ds_36b.dts
index f7aacce..88063cd 100644
--- a/arch/powerpc/boot/dts/p1022ds_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1022ds_36b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1022si-pre.dtsi"
+/include/ "p1022si-pre.dtsi"
 / {
 	model = "fsl,P1022DS";
 	compatible = "fsl,P1022DS";
@@ -99,5 +99,5 @@
 	};
 };
 
-/include/ "fsl/p1022si-post.dtsi"
+/include/ "p1022si-post.dtsi"
 /include/ "p1022ds.dtsi"
diff --git a/arch/powerpc/boot/dts/p1022rdk.dts b/arch/powerpc/boot/dts/fsl/p1022rdk.dts
similarity index 99%
rename from arch/powerpc/boot/dts/p1022rdk.dts
rename to arch/powerpc/boot/dts/fsl/p1022rdk.dts
index 51d82de..04c1633 100644
--- a/arch/powerpc/boot/dts/p1022rdk.dts
+++ b/arch/powerpc/boot/dts/fsl/p1022rdk.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1022si-pre.dtsi"
+/include/ "p1022si-pre.dtsi"
 / {
 	model = "fsl,P1022RDK";
 	compatible = "fsl,P1022RDK";
@@ -185,4 +185,4 @@
 	};
 };
 
-/include/ "fsl/p1022si-post.dtsi"
+/include/ "p1022si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1023rdb.dts b/arch/powerpc/boot/dts/fsl/p1023rdb.dts
similarity index 99%
rename from arch/powerpc/boot/dts/p1023rdb.dts
rename to arch/powerpc/boot/dts/fsl/p1023rdb.dts
index 05a00a4..9716ca6 100644
--- a/arch/powerpc/boot/dts/p1023rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/p1023rdb.dts
@@ -34,7 +34,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1023si-pre.dtsi"
+/include/ "p1023si-pre.dtsi"
 
 / {
 	model = "fsl,P1023";
@@ -257,4 +257,4 @@
 	};
 };
 
-/include/ "fsl/p1023si-post.dtsi"
+/include/ "p1023si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1024rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1024rdb.dtsi
rename to arch/powerpc/boot/dts/fsl/p1024rdb.dtsi
diff --git a/arch/powerpc/boot/dts/p1024rdb_32b.dts b/arch/powerpc/boot/dts/fsl/p1024rdb_32b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1024rdb_32b.dts
rename to arch/powerpc/boot/dts/fsl/p1024rdb_32b.dts
index 90e803e..8b09b9d 100644
--- a/arch/powerpc/boot/dts/p1024rdb_32b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1024rdb_32b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1024RDB";
 	compatible = "fsl,P1024RDB";
@@ -84,4 +84,4 @@
 };
 
 /include/ "p1024rdb.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1024rdb_36b.dts b/arch/powerpc/boot/dts/fsl/p1024rdb_36b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1024rdb_36b.dts
rename to arch/powerpc/boot/dts/fsl/p1024rdb_36b.dts
index 3656825..e7093ae 100644
--- a/arch/powerpc/boot/dts/p1024rdb_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1024rdb_36b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1024RDB";
 	compatible = "fsl,P1024RDB";
@@ -84,4 +84,4 @@
 };
 
 /include/ "p1024rdb.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1025rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1025rdb.dtsi
rename to arch/powerpc/boot/dts/fsl/p1025rdb.dtsi
diff --git a/arch/powerpc/boot/dts/p1025rdb_32b.dts b/arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts
similarity index 98%
rename from arch/powerpc/boot/dts/p1025rdb_32b.dts
rename to arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts
index a2ed628..b15acba 100644
--- a/arch/powerpc/boot/dts/p1025rdb_32b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1021si-pre.dtsi"
+/include/ "p1021si-pre.dtsi"
 / {
 	model = "fsl,P1025RDB";
 	compatible = "fsl,P1025RDB";
@@ -130,4 +130,4 @@
 };
 
 /include/ "p1025rdb.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1025rdb_36b.dts b/arch/powerpc/boot/dts/fsl/p1025rdb_36b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1025rdb_36b.dts
rename to arch/powerpc/boot/dts/fsl/p1025rdb_36b.dts
index 06deb6f..b0ded5e 100644
--- a/arch/powerpc/boot/dts/p1025rdb_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1025rdb_36b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1021si-pre.dtsi"
+/include/ "p1021si-pre.dtsi"
 / {
 	model = "fsl,P1025RDB";
 	compatible = "fsl,P1025RDB";
@@ -90,4 +90,4 @@
 };
 
 /include/ "p1025rdb.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1025twr.dts b/arch/powerpc/boot/dts/fsl/p1025twr.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1025twr.dts
rename to arch/powerpc/boot/dts/fsl/p1025twr.dts
index 9036a49..9b8863b 100644
--- a/arch/powerpc/boot/dts/p1025twr.dts
+++ b/arch/powerpc/boot/dts/fsl/p1025twr.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1021si-pre.dtsi"
+/include/ "p1021si-pre.dtsi"
 / {
 	model = "fsl,P1025";
 	compatible = "fsl,TWR-P1025";
@@ -92,4 +92,4 @@
 };
 
 /include/ "p1025twr.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1025twr.dtsi b/arch/powerpc/boot/dts/fsl/p1025twr.dtsi
similarity index 91%
rename from arch/powerpc/boot/dts/p1025twr.dtsi
rename to arch/powerpc/boot/dts/fsl/p1025twr.dtsi
index 8453501..08816fb 100644
--- a/arch/powerpc/boot/dts/p1025twr.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1025twr.dtsi
@@ -138,6 +138,18 @@
 		};
 	};
 
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <10>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0xc0000021>;
+		fsl,tmr-fiper1	= <999999990>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <133333332>;
+	};
+
 	enet0: ethernet@b0000 {
 		phy-handle = <&phy0>;
 		phy-connection-type = "rgmii-id";
diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/fsl/p2020ds.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p2020ds.dts
rename to arch/powerpc/boot/dts/fsl/p2020ds.dts
index 237310c..5ba06f7 100644
--- a/arch/powerpc/boot/dts/p2020ds.dts
+++ b/arch/powerpc/boot/dts/fsl/p2020ds.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/p2020si-pre.dtsi"
+/include/ "p2020si-pre.dtsi"
 
 / {
 	model = "fsl,P2020DS";
@@ -85,5 +85,5 @@
  * for interrupt-map & interrupt-map-mask
  */
 
-/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020si-post.dtsi"
 /include/ "p2020ds.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020ds.dtsi b/arch/powerpc/boot/dts/fsl/p2020ds.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p2020ds.dtsi
rename to arch/powerpc/boot/dts/fsl/p2020ds.dtsi
diff --git a/arch/powerpc/boot/dts/p2020rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi
similarity index 97%
rename from arch/powerpc/boot/dts/p2020rdb-pc.dtsi
rename to arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi
index c21d1c7..ad2e242 100644
--- a/arch/powerpc/boot/dts/p2020rdb-pc.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi
@@ -215,12 +215,12 @@
 	};
 
 	ptp_clock@24e00 {
-		fsl,tclk-period = <5>;
-		fsl,tmr-prsc = <200>;
-		fsl,tmr-add = <0xCCCCCCCD>;
-		fsl,tmr-fiper1 = <0x3B9AC9FB>;
-		fsl,tmr-fiper2 = <0x0001869B>;
-		fsl,max-adj = <249999999>;
+		fsl,tclk-period	= <5>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0xaaaaaaab>;
+		fsl,tmr-fiper1	= <999999995>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <299999999>;
 	};
 
 	enet0: ethernet@24000 {
diff --git a/arch/powerpc/boot/dts/p2020rdb-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p2020rdb-pc_32b.dts
rename to arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts
index 57573bd..d3295c2 100644
--- a/arch/powerpc/boot/dts/p2020rdb-pc_32b.dts
+++ b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p2020si-pre.dtsi"
+/include/ "p2020si-pre.dtsi"
 
 / {
 	model = "fsl,P2020RDB";
@@ -93,4 +93,4 @@
 };
 
 /include/ "p2020rdb-pc.dtsi"
-/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020rdb-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p2020rdb-pc_36b.dts
rename to arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts
index 470247e..9307a8f 100644
--- a/arch/powerpc/boot/dts/p2020rdb-pc_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p2020si-pre.dtsi"
+/include/ "p2020si-pre.dtsi"
 
 / {
 	model = "fsl,P2020RDB";
@@ -93,4 +93,4 @@
 };
 
 /include/ "p2020rdb-pc.dtsi"
-/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
similarity index 98%
rename from arch/powerpc/boot/dts/p2020rdb.dts
rename to arch/powerpc/boot/dts/fsl/p2020rdb.dts
index 4d52bce..70cf090 100644
--- a/arch/powerpc/boot/dts/p2020rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/p2020si-pre.dtsi"
+/include/ "p2020si-pre.dtsi"
 
 / {
 	model = "fsl,P2020RDB";
@@ -288,4 +288,4 @@
 	};
 };
 
-/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2041rdb.dts b/arch/powerpc/boot/dts/fsl/p2041rdb.dts
similarity index 95%
rename from arch/powerpc/boot/dts/p2041rdb.dts
rename to arch/powerpc/boot/dts/fsl/p2041rdb.dts
index d2bb076..e9bd894 100644
--- a/arch/powerpc/boot/dts/p2041rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/p2041rdb.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p2041si-pre.dtsi"
+/include/ "p2041si-pre.dtsi"
 
 / {
 	model = "fsl,P2041RDB";
@@ -247,4 +247,4 @@
 	};
 };
 
-/include/ "fsl/p2041si-post.dtsi"
+/include/ "p2041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
index 04ad177..51e975d 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -1,7 +1,7 @@
 /*
  * P2041/P2040 Silicon/SoC Device Tree Source (post include)
  *
- * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -430,4 +430,31 @@ crypto: crypto@300000 {
 
 /include/ "qoriq-qman1.dtsi"
 /include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-1g-4.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@f0000 {
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
index b1ea147..941274c 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
@@ -1,7 +1,7 @@
 /*
  * P2041 Silicon/SoC Device Tree Source (pre include)
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -72,6 +72,14 @@
 		rtic_c = &rtic_c;
 		rtic_d = &rtic_d;
 		sec_mon = &sec_mon;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
 	};
 
 	cpus {
diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/fsl/p3041ds.dts
similarity index 99%
rename from arch/powerpc/boot/dts/p3041ds.dts
rename to arch/powerpc/boot/dts/fsl/p3041ds.dts
index eca6c69..f2b1d40 100644
--- a/arch/powerpc/boot/dts/p3041ds.dts
+++ b/arch/powerpc/boot/dts/fsl/p3041ds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p3041si-pre.dtsi"
+/include/ "p3041si-pre.dtsi"
 
 / {
 	model = "fsl,P3041DS";
@@ -281,4 +281,4 @@
 	};
 };
 
-/include/ "fsl/p3041si-post.dtsi"
+/include/ "p3041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
index 2cab18a..187676f 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -1,7 +1,7 @@
 /*
  * P3041 Silicon/SoC Device Tree Source (post include)
  *
- * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -457,4 +457,31 @@ crypto: crypto@300000 {
 
 /include/ "qoriq-qman1.dtsi"
 /include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-1g-4.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@f0000 {
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
index dc5f4b3..50b73e8 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
@@ -1,7 +1,7 @@
 /*
  * P3041 Silicon/SoC Device Tree Source (pre include)
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -73,6 +73,14 @@
 		rtic_c = &rtic_c;
 		rtic_d = &rtic_d;
 		sec_mon = &sec_mon;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
 	};
 
 	cpus {
diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/fsl/p4080ds.dts
similarity index 99%
rename from arch/powerpc/boot/dts/p4080ds.dts
rename to arch/powerpc/boot/dts/fsl/p4080ds.dts
index 4f80c9d..28a55c5 100644
--- a/arch/powerpc/boot/dts/p4080ds.dts
+++ b/arch/powerpc/boot/dts/fsl/p4080ds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p4080si-pre.dtsi"
+/include/ "p4080si-pre.dtsi"
 
 / {
 	model = "fsl,P4080DS";
@@ -215,4 +215,4 @@
 
 };
 
-/include/ "fsl/p4080si-post.dtsi"
+/include/ "p4080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
index dfc76bc..a025208 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -1,7 +1,7 @@
 /*
  * P4080/P4040 Silicon/SoC Device Tree Source (post include)
  *
- * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -513,4 +513,50 @@ crypto: crypto@300000 {
 
 /include/ "qoriq-qman1.dtsi"
 /include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@f0000 {
+		};
+	};
+
+/include/ "qoriq-fman-1.dtsi"
+/include/ "qoriq-fman-1-1g-0.dtsi"
+/include/ "qoriq-fman-1-1g-1.dtsi"
+/include/ "qoriq-fman-1-1g-2.dtsi"
+/include/ "qoriq-fman-1-1g-3.dtsi"
+/include/ "qoriq-fman-1-10g-0.dtsi"
+	fman@500000 {
+		enet5: ethernet@e0000 {
+		};
+
+		enet6: ethernet@e2000 {
+		};
+
+		enet7: ethernet@e4000 {
+		};
+
+		enet8: ethernet@e6000 {
+		};
+
+		enet9: ethernet@f0000 {
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
index 38bde09..d56a546 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
@@ -1,7 +1,7 @@
 /*
  * P4080/P4040 Silicon/SoC Device Tree Source (pre include)
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -72,6 +72,19 @@
 		rtic_c = &rtic_c;
 		rtic_d = &rtic_d;
 		sec_mon = &sec_mon;
+
+		fman0 = &fman0;
+		fman1 = &fman1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
+		ethernet8 = &enet8;
+		ethernet9 = &enet9;
 	};
 
 	cpus {
diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/fsl/p5020ds.dts
similarity index 99%
rename from arch/powerpc/boot/dts/p5020ds.dts
rename to arch/powerpc/boot/dts/fsl/p5020ds.dts
index d0309a8..920dc77 100644
--- a/arch/powerpc/boot/dts/p5020ds.dts
+++ b/arch/powerpc/boot/dts/fsl/p5020ds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p5020si-pre.dtsi"
+/include/ "p5020si-pre.dtsi"
 
 / {
 	model = "fsl,P5020DS";
@@ -281,4 +281,4 @@
 	};
 };
 
-/include/ "fsl/p5020si-post.dtsi"
+/include/ "p5020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
index b77923a..cd008cd 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@@ -1,7 +1,7 @@
 /*
  * P5020/5010 Silicon/SoC Device Tree Source (post include)
  *
- * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -448,4 +448,31 @@
 	raideng@320000 {
 		fsl,iommu-parent = <&pamu1>;
 	};
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-1g-4.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@f0000 {
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
index 1cc61e1..bfba0b4 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
@@ -1,7 +1,7 @@
 /*
  * P5020/P5010 Silicon/SoC Device Tree Source (pre include)
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -79,6 +79,14 @@
 		raideng_jr1 = &raideng_jr1;
 		raideng_jr2 = &raideng_jr2;
 		raideng_jr3 = &raideng_jr3;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
 	};
 
 	cpus {
diff --git a/arch/powerpc/boot/dts/p5040ds.dts b/arch/powerpc/boot/dts/fsl/p5040ds.dts
similarity index 98%
rename from arch/powerpc/boot/dts/p5040ds.dts
rename to arch/powerpc/boot/dts/fsl/p5040ds.dts
index 0516823..e169cc2 100644
--- a/arch/powerpc/boot/dts/p5040ds.dts
+++ b/arch/powerpc/boot/dts/fsl/p5040ds.dts
@@ -32,7 +32,7 @@
  * software, even if advised of the possibility of such damage.
  */
 
-/include/ "fsl/p5040si-pre.dtsi"
+/include/ "p5040si-pre.dtsi"
 
 / {
 	model = "fsl,P5040DS";
@@ -251,4 +251,4 @@
 	};
 };
 
-/include/ "fsl/p5040si-post.dtsi"
+/include/ "p5040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
index 6d21452..2f227b1 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
@@ -1,7 +1,7 @@
 /*
  * P5040 Silicon/SoC Device Tree Source (post include)
  *
- * Copyright 2012 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -422,4 +422,58 @@
 
 /include/ "qoriq-qman1.dtsi"
 /include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-1g-4.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@f0000 {
+		};
+	};
+
+/include/ "qoriq-fman-1.dtsi"
+/include/ "qoriq-fman-1-1g-0.dtsi"
+/include/ "qoriq-fman-1-1g-1.dtsi"
+/include/ "qoriq-fman-1-1g-2.dtsi"
+/include/ "qoriq-fman-1-1g-3.dtsi"
+/include/ "qoriq-fman-1-1g-4.dtsi"
+/include/ "qoriq-fman-1-10g-0.dtsi"
+	fman@500000 {
+		enet6: ethernet@e0000 {
+		};
+
+		enet7: ethernet@e2000 {
+		};
+
+		enet8: ethernet@e4000 {
+		};
+
+		enet9: ethernet@e6000 {
+		};
+
+		enet10: ethernet@e8000 {
+		};
+
+		enet11: ethernet@f0000 {
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
index b048a2b..0659d5b 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
@@ -1,7 +1,7 @@
 /*
  * P5040 Silicon/SoC Device Tree Source (pre include)
  *
- * Copyright 2012 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -72,6 +72,21 @@
 		rtic_c = &rtic_c;
 		rtic_d = &rtic_d;
 		sec_mon = &sec_mon;
+
+		fman0 = &fman0;
+		fman1 = &fman1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
+		ethernet8 = &enet8;
+		ethernet9 = &enet9;
+		ethernet10 = &enet10;
+		ethernet11 = &enet11;
 	};
 
 	cpus {
diff --git a/arch/powerpc/boot/dts/ppa8548.dts b/arch/powerpc/boot/dts/fsl/ppa8548.dts
similarity index 98%
rename from arch/powerpc/boot/dts/ppa8548.dts
rename to arch/powerpc/boot/dts/fsl/ppa8548.dts
index 27b0699..8f9ffbe 100644
--- a/arch/powerpc/boot/dts/ppa8548.dts
+++ b/arch/powerpc/boot/dts/fsl/ppa8548.dts
@@ -12,7 +12,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/mpc8548si-pre.dtsi"
+/include/ "mpc8548si-pre.dtsi"
 
 / {
 	model = "ppa8548";
@@ -161,4 +161,4 @@
 	};
 };
 
-/include/ "fsl/mpc8548si-post.dtsi"
+/include/ "mpc8548si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
index 4ece1ed..88cd70d 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
@@ -32,13 +32,14 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-global-utilities@e1000 {
+clockgen: global-utilities@e1000 {
 	compatible = "fsl,qoriq-clockgen-1.0";
 	ranges = <0x0 0xe1000 0x1000>;
 	reg = <0xe1000 0x1000>;
 	clock-frequency = <0>;
 	#address-cells = <1>;
 	#size-cells = <1>;
+	#clock-cells = <2>;
 
 	sysclk: sysclk {
 		#clock-cells = <0>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
index 48e0b6e..6dfd7c5 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
@@ -32,12 +32,13 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-global-utilities@e1000 {
+clockgen: global-utilities@e1000 {
 	compatible = "fsl,qoriq-clockgen-2.0";
 	ranges = <0x0 0xe1000 0x1000>;
 	reg = <0xe1000 0x1000>;
 	#address-cells = <1>;
 	#size-cells = <1>;
+	#clock-cells = <2>;
 
 	sysclk: sysclk {
 		#clock-cells = <0>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi
new file mode 100644
index 0000000..eb77675
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan 10g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x90000 0x1000>;
+	};
+
+	fman0_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xb0000 0x1000>;
+	};
+
+	ethernet@f0000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-xgec";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
+	};
+
+	xmdio0: mdio@f1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+		interrupts = <101 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi
new file mode 100644
index 0000000..b965bc2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi
@@ -0,0 +1,69 @@
+/*
+ * QorIQ FMan 1g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman0_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+		tbi-handle = <&tbi0>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio0: mdio@e1120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe1120 0xee0>;
+		interrupts = <100 2 0 0>;
+
+		tbi0: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi
new file mode 100644
index 0000000..9eb6e6d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #1 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman0_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+		tbi-handle = <&tbi1>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e3120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe3120 0xee0>;
+
+		tbi1: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi
new file mode 100644
index 0000000..092b899
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #2 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0a: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman0_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	ethernet@e4000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
+		tbi-handle = <&tbi2>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e5120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe5120 0xee0>;
+
+		tbi2: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi
new file mode 100644
index 0000000..2df0dc8
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0b: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman0_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	ethernet@e6000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
+		tbi-handle = <&tbi3>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e7120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe7120 0xee0>;
+
+		tbi3: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi
new file mode 100644
index 0000000..5fceb24
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #4 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0c: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman0_tx_0x2c: port@ac000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	ethernet@e8000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe8000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+		tbi-handle = <&tbi4>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e9120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe9120 0xee0>;
+
+		tbi4: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi
new file mode 100644
index 0000000..abd01d4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi
@@ -0,0 +1,101 @@
+/*
+ * QorIQ FMan device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman0: fman@400000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <0>;
+	compatible = "fsl,fman";
+	ranges = <0 0x400000 0x100000>;
+	reg = <0x400000 0x100000>;
+	interrupts = <96 2 0 0>, <16 2 1 1>;
+	clocks = <&clockgen 3 0>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x40 0xc>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x28000>;
+	};
+
+	fman0_oh_0x1: port@81000 {
+		cell-index = <0x1>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x81000 0x1000>;
+	};
+
+	fman0_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman0_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman0_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman0_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x85000 0x1000>;
+		status = "disabled";
+	};
+
+	fman0_oh_0x6: port@86000 {
+		cell-index = <0x6>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x86000 0x1000>;
+		status = "disabled";
+	};
+
+	fman0_oh_0x7: port@87000 {
+		cell-index = <0x7>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x87000 0x1000>;
+		status = "disabled";
+	};
+
+	ptp_timer0: ptp-timer@fe000 {
+		compatible = "fsl,fman-ptp-timer";
+		reg = <0xfe000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi
new file mode 100644
index 0000000..83ae87b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi
@@ -0,0 +1,61 @@
+/*
+ * QorIQ FMan 10g port #0 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x90000 0x1000>;
+	};
+
+	fman1_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xb0000 0x1000>;
+	};
+
+	ethernet@f0000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-xgec";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
+	};
+
+	mdio@f1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi
new file mode 100644
index 0000000..b0f0e36
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #0 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman1_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>;
+		tbi-handle = <&tbi5>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e1120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe1120 0xee0>;
+
+		tbi5: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi
new file mode 100644
index 0000000..a3a79f8
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #1 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman1_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>;
+		tbi-handle = <&tbi6>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e3120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe3120 0xee0>;
+
+		tbi6: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi
new file mode 100644
index 0000000..96a69a8
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #2 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0a: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman1_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	ethernet@e4000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>;
+		tbi-handle = <&tbi7>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e5120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe5120 0xee0>;
+
+		tbi7: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi
new file mode 100644
index 0000000..7405d19
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #3 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0b: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman1_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	ethernet@e6000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>;
+		tbi-handle = <&tbi8>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e7120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe7120 0xee0>;
+
+		tbi8: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi
new file mode 100644
index 0000000..f49ad69
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #4 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0c: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman1_tx_0x2c: port@ac000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	ethernet@e8000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe8000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>;
+		tbi-handle = <&tbi9>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e9120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe9120 0xee0>;
+
+		tbi9: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi
new file mode 100644
index 0000000..debea75
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi
@@ -0,0 +1,101 @@
+/*
+ * QorIQ FMan device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman1: fman@500000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <1>;
+	compatible = "fsl,fman";
+	ranges = <0 0x500000 0x100000>;
+	reg = <0x500000 0x100000>;
+	interrupts = <97 2 0 0>, <16 2 1 0>;
+	clocks = <&clockgen 3 1>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x60 0xc>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x28000>;
+	};
+
+	fman1_oh_0x1: port@81000 {
+		cell-index = <0x1>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x81000 0x1000>;
+	};
+
+	fman1_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman1_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman1_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman1_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x85000 0x1000>;
+		status = "disabled";
+	};
+
+	fman1_oh_0x6: port@86000 {
+		cell-index = <0x6>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x86000 0x1000>;
+		status = "disabled";
+	};
+
+	fman1_oh_0x7: port@87000 {
+		cell-index = <0x7>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x87000 0x1000>;
+		status = "disabled";
+	};
+
+	ptp_timer1: ptp-timer@fe000 {
+		compatible = "fsl,fman-ptp-timer";
+		reg = <0xfe000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
new file mode 100644
index 0000000..2e441fa
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
@@ -0,0 +1,66 @@
+/*
+ * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x88000 0x1000>;
+		fsl,fman-10g-port;
+		fsl,fman-best-effort-port;
+	};
+
+	fman0_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa8000 0x1000>;
+		fsl,fman-10g-port;
+		fsl,fman-best-effort-port;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe1000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
new file mode 100644
index 0000000..0b8f87f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
@@ -0,0 +1,63 @@
+/*
+ * QorIQ FMan v3 10g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x90000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb0000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f0000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
+	};
+
+	mdio@f1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
new file mode 100644
index 0000000..ba6f227
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
@@ -0,0 +1,66 @@
+/*
+ * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x89000 0x1000>;
+		fsl,fman-10g-port;
+		fsl,fman-best-effort-port;
+	};
+
+	fman0_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa9000 0x1000>;
+		fsl,fman-10g-port;
+		fsl,fman-best-effort-port;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe3000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
new file mode 100644
index 0000000..8860038
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
@@ -0,0 +1,63 @@
+/*
+ * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x11: port@91000 {
+		cell-index = <0x11>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x91000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x31: port@b1000 {
+		cell-index = <0x31>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb1000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f2000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>;
+	};
+
+	mdio@f3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf3000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi
new file mode 100644
index 0000000..ace9c13
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman0_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe1000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi
new file mode 100644
index 0000000..a4fc286
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman0_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe3000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi
new file mode 100644
index 0000000..78596fa
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #2 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0a: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman0_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	ethernet@e4000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e5000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe5000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi
new file mode 100644
index 0000000..af93abd
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0b: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman0_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	ethernet@e6000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e7000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe7000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi
new file mode 100644
index 0000000..97cffd7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #4 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0c: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman0_tx_0x2c: port@ac000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	ethernet@e8000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe8000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e9000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe9000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi
new file mode 100644
index 0000000..232c5c2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #5 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0d: port@8d000 {
+		cell-index = <0xd>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8d000 0x1000>;
+	};
+
+	fman0_tx_0x2d: port@ad000 {
+		cell-index = <0x2d>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xad000 0x1000>;
+	};
+
+	ethernet@ea000 {
+		cell-index = <5>;
+		compatible = "fsl,fman-memac";
+		reg = <0xea000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@eb000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xeb000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi
new file mode 100644
index 0000000..3a20e0d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi
@@ -0,0 +1,106 @@
+/*
+ * QorIQ FMan v3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman0: fman@400000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <0>;
+	compatible = "fsl,fman";
+	ranges = <0 0x400000 0x100000>;
+	reg = <0x400000 0x100000>;
+	interrupts = <96 2 0 0>, <16 2 1 1>;
+	clocks = <&clockgen 3 0>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x800 0x10>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x60000>;
+	};
+
+	fman0_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman0_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman0_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman0_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x85000 0x1000>;
+	};
+
+	fman0_oh_0x6: port@86000 {
+		cell-index = <0x6>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x86000 0x1000>;
+	};
+
+	fman0_oh_0x7: port@87000 {
+		cell-index = <0x7>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x87000 0x1000>;
+	};
+
+	mdio0: mdio@fc000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfc000 0x1000>;
+	};
+
+	xmdio0: mdio@fd000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfd000 0x1000>;
+	};
+
+	ptp_timer0: ptp-timer@fe000 {
+		compatible = "fsl,fman-ptp-timer";
+		reg = <0xfe000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi
new file mode 100644
index 0000000..89d64ee
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi
@@ -0,0 +1,63 @@
+/*
+ * QorIQ FMan v3 10g port #0 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x90000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman1_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb0000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f0000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
+	};
+
+	mdio@f1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi
new file mode 100644
index 0000000..7fa9260
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi
@@ -0,0 +1,63 @@
+/*
+ * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x11: port@91000 {
+		cell-index = <0x11>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x91000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman1_tx_0x31: port@b1000 {
+		cell-index = <0x31>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb1000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f2000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf2000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x11 &fman1_tx_0x31>;
+	};
+
+	mdio@f3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf3000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi
new file mode 100644
index 0000000..3d23666
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman1_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe1000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi
new file mode 100644
index 0000000..97dc2ee
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman1_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe3000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi
new file mode 100644
index 0000000..f084dd2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #2 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0a: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman1_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	ethernet@e4000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e5000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe5000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi
new file mode 100644
index 0000000..bb627b3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #3 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0b: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman1_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	ethernet@e6000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e7000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe7000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi
new file mode 100644
index 0000000..821ed12
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #4 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0c: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman1_tx_0x2c: port@ac000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	ethernet@e8000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe8000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e9000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe9000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi
new file mode 100644
index 0000000..e245f1a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #5 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0d: port@8d000 {
+		cell-index = <0xd>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8d000 0x1000>;
+	};
+
+	fman1_tx_0x2d: port@ad000 {
+		cell-index = <0x2d>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xad000 0x1000>;
+	};
+
+	ethernet@ea000 {
+		cell-index = <5>;
+		compatible = "fsl,fman-memac";
+		reg = <0xea000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0d &fman1_tx_0x2d>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@eb000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xeb000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi
new file mode 100644
index 0000000..82750ac
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi
@@ -0,0 +1,106 @@
+/*
+ * QorIQ FMan v3 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman1: fman@500000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <1>;
+	compatible = "fsl,fman";
+	ranges = <0 0x500000 0x100000>;
+	reg = <0x500000 0x100000>;
+	interrupts = <97 2 0 0>, <16 2 1 0>;
+	clocks = <&clockgen 3 1>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x820 0x10>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x60000>;
+	};
+
+	fman1_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman1_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman1_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman1_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x85000 0x1000>;
+	};
+
+	fman1_oh_0x6: port@86000 {
+		cell-index = <0x6>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x86000 0x1000>;
+	};
+
+	fman1_oh_0x7: port@87000 {
+		cell-index = <0x7>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x87000 0x1000>;
+	};
+
+	mdio1: mdio@fc000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfc000 0x1000>;
+	};
+
+	mdio@fd000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfd000 0x1000>;
+	};
+
+	ptp_timer1: ptp-timer@fe000 {
+		compatible = "fsl,fman-ptp-timer";
+		reg = <0xfe000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi
new file mode 100644
index 0000000..7f60b60
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi
@@ -0,0 +1,94 @@
+/*
+ * QorIQ FMan v3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman0: fman@400000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <0>;
+	compatible = "fsl,fman";
+	ranges = <0 0x400000 0x100000>;
+	reg = <0x400000 0x100000>;
+	interrupts = <96 2 0 0>, <16 2 1 1>;
+	clocks = <&clockgen 3 0>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x800 0x10>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x30000>;
+	};
+
+	fman0_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman0_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman0_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman0_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x85000 0x1000>;
+	};
+
+	mdio0: mdio@fc000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfc000 0x1000>;
+	};
+
+	xmdio0: mdio@fd000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfd000 0x1000>;
+	};
+
+	ptp_timer0: ptp-timer@fe000 {
+		compatible = "fsl,fman-ptp-timer";
+		reg = <0xfe000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/t1023rdb.dts b/arch/powerpc/boot/dts/fsl/t1023rdb.dts
similarity index 99%
rename from arch/powerpc/boot/dts/t1023rdb.dts
rename to arch/powerpc/boot/dts/fsl/t1023rdb.dts
index d3fa829..2b2fff4 100644
--- a/arch/powerpc/boot/dts/t1023rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1023rdb.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t102xsi-pre.dtsi"
+/include/ "t102xsi-pre.dtsi"
 
 / {
 	model = "fsl,T1023RDB";
@@ -159,4 +159,4 @@
 	};
 };
 
-/include/ "fsl/t1023si-post.dtsi"
+/include/ "t1023si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
index df1f068..518ddaa 100644
--- a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
@@ -327,4 +327,23 @@
 	};
 
 /include/ "qoriq-sec5.0-0.dtsi"
+
+/include/ "qoriq-fman3l-0.dtsi"
+/include/ "qoriq-fman3-0-10g-0-best-effort.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/t1024qds.dts b/arch/powerpc/boot/dts/fsl/t1024qds.dts
similarity index 99%
rename from arch/powerpc/boot/dts/t1024qds.dts
rename to arch/powerpc/boot/dts/fsl/t1024qds.dts
index f31fabb..43cd5b5 100644
--- a/arch/powerpc/boot/dts/t1024qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t1024qds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t102xsi-pre.dtsi"
+/include/ "t102xsi-pre.dtsi"
 
 / {
 	model = "fsl,T1024QDS";
@@ -248,4 +248,4 @@
 	};
 };
 
-/include/ "fsl/t1024si-post.dtsi"
+/include/ "t1024si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1024rdb.dts b/arch/powerpc/boot/dts/fsl/t1024rdb.dts
similarity index 99%
rename from arch/powerpc/boot/dts/t1024rdb.dts
rename to arch/powerpc/boot/dts/fsl/t1024rdb.dts
index bf05e32..429d8c7 100644
--- a/arch/powerpc/boot/dts/t1024rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1024rdb.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t102xsi-pre.dtsi"
+/include/ "t102xsi-pre.dtsi"
 
 / {
 	model = "fsl,T1024RDB";
@@ -188,4 +188,4 @@
 	};
 };
 
-/include/ "fsl/t1024si-post.dtsi"
+/include/ "t1024si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
index 1f1a9f8..3e1528a 100644
--- a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
@@ -59,6 +59,12 @@
 		sdhc = &sdhc;
 
 		crypto = &crypto;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
 	};
 
 	cpus {
diff --git a/arch/powerpc/boot/dts/t1040d4rdb.dts b/arch/powerpc/boot/dts/fsl/t1040d4rdb.dts
similarity index 95%
rename from arch/powerpc/boot/dts/t1040d4rdb.dts
rename to arch/powerpc/boot/dts/fsl/t1040d4rdb.dts
index 2d1315a..681746e 100644
--- a/arch/powerpc/boot/dts/t1040d4rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1040d4rdb.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xsi-pre.dtsi"
 /include/ "t104xd4rdb.dtsi"
 
 / {
@@ -43,4 +43,4 @@
 	interrupt-parent = <&mpic>;
 };
 
-/include/ "fsl/t1040si-post.dtsi"
+/include/ "t1040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1040qds.dts b/arch/powerpc/boot/dts/fsl/t1040qds.dts
similarity index 95%
rename from arch/powerpc/boot/dts/t1040qds.dts
rename to arch/powerpc/boot/dts/fsl/t1040qds.dts
index 973c29c..4d29865 100644
--- a/arch/powerpc/boot/dts/t1040qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t1040qds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xsi-pre.dtsi"
 /include/ "t104xqds.dtsi"
 
 / {
@@ -43,4 +43,4 @@
 	interrupt-parent = <&mpic>;
 };
 
-/include/ "fsl/t1040si-post.dtsi"
+/include/ "t1040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
similarity index 95%
rename from arch/powerpc/boot/dts/t1040rdb.dts
rename to arch/powerpc/boot/dts/fsl/t1040rdb.dts
index 79a0bed..8f9e65b 100644
--- a/arch/powerpc/boot/dts/t1040rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xsi-pre.dtsi"
 /include/ "t104xrdb.dtsi"
 
 / {
@@ -45,4 +45,4 @@
 	};
 };
 
-/include/ "fsl/t1040si-post.dtsi"
+/include/ "t1040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index 9770d02..d30b3de 100644
--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -547,4 +547,35 @@
 /include/ "qoriq-sec5.0-0.dtsi"
 /include/ "qoriq-qman3.dtsi"
 /include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman3l-0.dtsi"
+/include/ "qoriq-fman3-0-1g-0.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+/include/ "qoriq-fman3-0-1g-4.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		mdio@fc000 {
+			interrupts = <100 1 0 0>;
+		};
+
+		mdio@fd000 {
+			status = "disabled";
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/t1042d4rdb.dts b/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts
similarity index 95%
rename from arch/powerpc/boot/dts/t1042d4rdb.dts
rename to arch/powerpc/boot/dts/fsl/t1042d4rdb.dts
index 846f8c8..b245b31 100644
--- a/arch/powerpc/boot/dts/t1042d4rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xsi-pre.dtsi"
 /include/ "t104xd4rdb.dtsi"
 
 / {
@@ -50,4 +50,4 @@
 	};
 };
 
-/include/ "fsl/t1040si-post.dtsi"
+/include/ "t1040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1042qds.dts b/arch/powerpc/boot/dts/fsl/t1042qds.dts
similarity index 95%
rename from arch/powerpc/boot/dts/t1042qds.dts
rename to arch/powerpc/boot/dts/fsl/t1042qds.dts
index 45bd037..4ab9bbe 100644
--- a/arch/powerpc/boot/dts/t1042qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t1042qds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xsi-pre.dtsi"
 /include/ "t104xqds.dtsi"
 
 / {
@@ -43,4 +43,4 @@
 	interrupt-parent = <&mpic>;
 };
 
-/include/ "fsl/t1042si-post.dtsi"
+/include/ "t1042si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1042rdb.dts b/arch/powerpc/boot/dts/fsl/t1042rdb.dts
similarity index 95%
rename from arch/powerpc/boot/dts/t1042rdb.dts
rename to arch/powerpc/boot/dts/fsl/t1042rdb.dts
index 738c237..67af56b 100644
--- a/arch/powerpc/boot/dts/t1042rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1042rdb.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xsi-pre.dtsi"
 /include/ "t104xrdb.dtsi"
 
 / {
@@ -45,4 +45,4 @@
 	};
 };
 
-/include/ "fsl/t1042si-post.dtsi"
+/include/ "t1042si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1042rdb_pi.dts b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts
similarity index 96%
rename from arch/powerpc/boot/dts/t1042rdb_pi.dts
rename to arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts
index 634f751..2f67677 100644
--- a/arch/powerpc/boot/dts/t1042rdb_pi.dts
+++ b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xsi-pre.dtsi"
 /include/ "t104xrdb.dtsi"
 
 / {
@@ -54,4 +54,4 @@
 	};
 };
 
-/include/ "fsl/t1042si-post.dtsi"
+/include/ "t1042si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t104xd4rdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi
similarity index 91%
rename from arch/powerpc/boot/dts/t104xd4rdb.dtsi
rename to arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi
index 491367b..3f6d7c6 100644
--- a/arch/powerpc/boot/dts/t104xd4rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi
@@ -109,6 +109,16 @@
 				/* input clock */
 				spi-max-frequency = <10000000>;
 			};
+			slic@1 {
+				compatible = "maxim,ds26522";
+				reg = <1>;
+				spi-max-frequency = <2000000>; /* input clock */
+			};
+			slic@2 {
+				compatible = "maxim,ds26522";
+				reg = <2>;
+				spi-max-frequency = <2000000>; /* input clock */
+			};
 		};
 		i2c@118000 {
 			hwmon@4c {
diff --git a/arch/powerpc/boot/dts/t104xqds.dtsi b/arch/powerpc/boot/dts/fsl/t104xqds.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/t104xqds.dtsi
rename to arch/powerpc/boot/dts/fsl/t104xqds.dtsi
diff --git a/arch/powerpc/boot/dts/t104xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/t104xrdb.dtsi
rename to arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
index bbb7025..fcfa38a 100644
--- a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
@@ -1,7 +1,7 @@
 /*
  * T1040/T1042 Silicon/SoC Device Tree Source (pre include)
  *
- * Copyright 2013 Freescale Semiconductor Inc.
+ * Copyright 2013-2014 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -58,6 +58,13 @@
 		sdhc = &sdhc;
 
 		crypto = &crypto;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
 	};
 
 	cpus {
diff --git a/arch/powerpc/boot/dts/t2080qds.dts b/arch/powerpc/boot/dts/fsl/t2080qds.dts
similarity index 96%
rename from arch/powerpc/boot/dts/t2080qds.dts
rename to arch/powerpc/boot/dts/fsl/t2080qds.dts
index aa1d6d8..9c8e10f 100644
--- a/arch/powerpc/boot/dts/t2080qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t2080qds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t208xsi-pre.dtsi"
+/include/ "t208xsi-pre.dtsi"
 /include/ "t208xqds.dtsi"
 
 / {
@@ -54,4 +54,4 @@
 	};
 };
 
-/include/ "fsl/t2080si-post.dtsi"
+/include/ "t2080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t2080rdb.dts b/arch/powerpc/boot/dts/fsl/t2080rdb.dts
similarity index 96%
rename from arch/powerpc/boot/dts/t2080rdb.dts
rename to arch/powerpc/boot/dts/fsl/t2080rdb.dts
index e889104..33205bf 100644
--- a/arch/powerpc/boot/dts/t2080rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t2080rdb.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t208xsi-pre.dtsi"
+/include/ "t208xsi-pre.dtsi"
 /include/ "t208xrdb.dtsi"
 
 / {
@@ -54,4 +54,4 @@
 	};
 };
 
-/include/ "fsl/t2080si-post.dtsi"
+/include/ "t2080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t2081qds.dts b/arch/powerpc/boot/dts/fsl/t2081qds.dts
similarity index 95%
rename from arch/powerpc/boot/dts/t2081qds.dts
rename to arch/powerpc/boot/dts/fsl/t2081qds.dts
index 8ec80a7..b812135 100644
--- a/arch/powerpc/boot/dts/t2081qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t2081qds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t208xsi-pre.dtsi"
+/include/ "t208xsi-pre.dtsi"
 /include/ "t208xqds.dtsi"
 
 / {
@@ -43,4 +43,4 @@
 	interrupt-parent = <&mpic>;
 };
 
-/include/ "fsl/t2081si-post.dtsi"
+/include/ "t2081si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
index 32c790a..c744569 100644
--- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
@@ -630,6 +630,49 @@
 /include/ "qoriq-qman3.dtsi"
 /include/ "qoriq-bman1.dtsi"
 
+/include/ "qoriq-fman3-0.dtsi"
+/include/ "qoriq-fman3-0-1g-0.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+/include/ "qoriq-fman3-0-1g-4.dtsi"
+/include/ "qoriq-fman3-0-1g-5.dtsi"
+/include/ "qoriq-fman3-0-10g-0.dtsi"
+/include/ "qoriq-fman3-0-10g-1.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@ea000 {
+		};
+
+		enet6: ethernet@f0000 {
+		};
+
+		enet7: ethernet@f2000 {
+		};
+
+		mdio@fc000 {
+			interrupts = <100 1 0 0>;
+		};
+
+		mdio@fd000 {
+			interrupts = <101 1 0 0>;
+		};
+	};
+
 	L2_1: l2-cache-controller@c20000 {
 		/* Cluster 0 L2 cache */
 		compatible = "fsl,t2080-l2-cache-controller";
diff --git a/arch/powerpc/boot/dts/t208xqds.dtsi b/arch/powerpc/boot/dts/fsl/t208xqds.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/t208xqds.dtsi
rename to arch/powerpc/boot/dts/fsl/t208xqds.dtsi
diff --git a/arch/powerpc/boot/dts/t208xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/t208xrdb.dtsi
rename to arch/powerpc/boot/dts/fsl/t208xrdb.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
index e71ceb0..c2e5720 100644
--- a/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
@@ -51,6 +51,17 @@
 		serial3 = &serial3;
 
 		crypto = &crypto;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
+
 		pci0 = &pci0;
 		pci1 = &pci1;
 		pci2 = &pci2;
diff --git a/arch/powerpc/boot/dts/t4240qds.dts b/arch/powerpc/boot/dts/fsl/t4240qds.dts
similarity index 99%
rename from arch/powerpc/boot/dts/t4240qds.dts
rename to arch/powerpc/boot/dts/fsl/t4240qds.dts
index 93722da..c067a65 100644
--- a/arch/powerpc/boot/dts/t4240qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t4240qds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t4240si-pre.dtsi"
+/include/ "t4240si-pre.dtsi"
 
 / {
 	model = "fsl,T4240QDS";
@@ -307,4 +307,4 @@
 	};
 };
 
-/include/ "fsl/t4240si-post.dtsi"
+/include/ "t4240si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t4240rdb.dts b/arch/powerpc/boot/dts/fsl/t4240rdb.dts
similarity index 97%
rename from arch/powerpc/boot/dts/t4240rdb.dts
rename to arch/powerpc/boot/dts/fsl/t4240rdb.dts
index 993eb4b..6e820a8 100644
--- a/arch/powerpc/boot/dts/t4240rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t4240rdb.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t4240si-pre.dtsi"
+/include/ "t4240si-pre.dtsi"
 
 / {
 	model = "fsl,T4240RDB";
@@ -210,4 +210,4 @@
 	};
 };
 
-/include/ "fsl/t4240si-post.dtsi"
+/include/ "t4240si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
index d806360..68c4ead 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
@@ -1,7 +1,7 @@
 /*
  * T4240 Silicon/SoC Device Tree Source (post include)
  *
- * Copyright 2012 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -1068,6 +1068,92 @@
 /include/ "qoriq-qman3.dtsi"
 /include/ "qoriq-bman1.dtsi"
 
+/include/ "qoriq-fman3-0.dtsi"
+/include/ "qoriq-fman3-0-1g-0.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+/include/ "qoriq-fman3-0-1g-4.dtsi"
+/include/ "qoriq-fman3-0-1g-5.dtsi"
+/include/ "qoriq-fman3-0-10g-0.dtsi"
+/include/ "qoriq-fman3-0-10g-1.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@ea000 {
+		};
+
+		enet6: ethernet@f0000 {
+		};
+
+		enet7: ethernet@f2000 {
+		};
+
+		mdio@fc000 {
+			status = "disabled";
+		};
+
+		mdio@fd000 {
+			status = "disabled";
+		};
+	};
+
+/include/ "qoriq-fman3-1.dtsi"
+/include/ "qoriq-fman3-1-1g-0.dtsi"
+/include/ "qoriq-fman3-1-1g-1.dtsi"
+/include/ "qoriq-fman3-1-1g-2.dtsi"
+/include/ "qoriq-fman3-1-1g-3.dtsi"
+/include/ "qoriq-fman3-1-1g-4.dtsi"
+/include/ "qoriq-fman3-1-1g-5.dtsi"
+/include/ "qoriq-fman3-1-10g-0.dtsi"
+/include/ "qoriq-fman3-1-10g-1.dtsi"
+	fman@500000 {
+		enet8: ethernet@e0000 {
+		};
+
+		enet9: ethernet@e2000 {
+		};
+
+		enet10: ethernet@e4000 {
+		};
+
+		enet11: ethernet@e6000 {
+		};
+
+		enet12: ethernet@e8000 {
+		};
+
+		enet13: ethernet@ea000 {
+		};
+
+		enet14: ethernet@f0000 {
+		};
+
+		enet15: ethernet@f2000 {
+		};
+
+		mdio@fc000 {
+			interrupts = <100 1 0 0>;
+		};
+
+		mdio@fd000 {
+			interrupts = <101 1 0 0>;
+		};
+	};
+
 	L2_1: l2-cache-controller@c20000 {
 		compatible = "fsl,t4240-l2-cache-controller";
 		reg = <0xc20000 0x40000>;
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
index 261a3ab..1184a74 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
@@ -1,7 +1,7 @@
 /*
  * T4240 Silicon/SoC Device Tree Source (pre include)
  *
- * Copyright 2012 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -51,6 +51,7 @@
 		serial2 = &serial2;
 		serial3 = &serial3;
 		crypto = &crypto;
+
 		pci0 = &pci0;
 		pci1 = &pci1;
 		pci2 = &pci2;
@@ -59,6 +60,25 @@
 		dma1 = &dma1;
 		dma2 = &dma2;
 		sdhc = &sdhc;
+
+		fman0 = &fman0;
+		fman1 = &fman1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
+		ethernet8 = &enet8;
+		ethernet9 = &enet9;
+		ethernet10 = &enet10;
+		ethernet11 = &enet11;
+		ethernet12 = &enet12;
+		ethernet13 = &enet13;
+		ethernet14 = &enet14;
+		ethernet15 = &enet15;
 	};
 
 	cpus {
diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi
index 7f9d14f..a015e45 100644
--- a/arch/powerpc/boot/dts/mpc5121.dtsi
+++ b/arch/powerpc/boot/dts/mpc5121.dtsi
@@ -77,7 +77,6 @@
 		#address-cells = <2>;
 		#size-cells = <1>;
 		reg = <0x80000020 0x40>;
-		interrupts = <7 0x8>;
 		ranges = <0x0 0x0 0xfc000000 0x04000000>;
 	};
 
@@ -329,7 +328,15 @@
 		/* LocalPlus controller */
 		lpc@10000 {
 			compatible = "fsl,mpc5121-lpc";
-			reg = <0x10000 0x200>;
+			reg = <0x10000 0x100>;
+		};
+
+		sclpc@10100 {
+			compatible = "fsl,mpc512x-lpbfifo";
+			reg = <0x10100 0x50>;
+			interrupts = <7 0x8>;
+			dmas = <&dma0 26>;
+			dma-names = "rx-tx";
 		};
 
 		pata@10200 {
diff --git a/arch/powerpc/boot/dts/mpc5125twr.dts b/arch/powerpc/boot/dts/mpc5125twr.dts
index e4f2974..898eb58 100644
--- a/arch/powerpc/boot/dts/mpc5125twr.dts
+++ b/arch/powerpc/boot/dts/mpc5125twr.dts
@@ -246,6 +246,14 @@
 			status = "disabled";
 		};
 
+		sclpc@10100 {
+			compatible = "fsl,mpc512x-lpbfifo";
+			reg = <0x10100 0x50>;
+			interrupts = <7 0x8>;
+			dmas = <&dma0 26>;
+			dma-names = "rx-tx";
+		};
+
 		// 5125 PSCs are not 52xx or 5121 PSC compatible
 		// PSC1 uart0 aka ttyPSC0
 		serial@11100 {
@@ -279,10 +287,11 @@
 			clock-names = "ipg";
 		};
 
-		dma@14000 {
+		dma0: dma@14000 {
 			compatible = "fsl,mpc5121-dma"; // BSP name: "mpc512x-dma2"
 			reg = <0x14000 0x1800>;
 			interrupts = <65 0x8>;
+			#dma-cells = <1>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/prpmc2800.dts b/arch/powerpc/boot/dts/prpmc2800.dts
deleted file mode 100644
index 00afaac..0000000
--- a/arch/powerpc/boot/dts/prpmc2800.dts
+++ /dev/null
@@ -1,297 +0,0 @@
-/* Device Tree Source for Motorola PrPMC2800
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2007 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Property values that are labeled as "Default" will be updated by bootwrapper
- * if it can determine the exact PrPMC type.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "PrPMC280/PrPMC2800"; /* Default */
-	compatible = "motorola,PrPMC2800";
-	coherency-off;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,7447 {
-			device_type = "cpu";
-			reg = <0>;
-			clock-frequency = <733333333>;	/* Default */
-			bus-frequency = <133333333>;
-			timebase-frequency = <33333333>;
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x20000000>;			/* Default (512MB) */
-	};
-
-	system-controller@f1000000 { /* Marvell Discovery mv64360 */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		model = "mv64360";			/* Default */
-		compatible = "marvell,mv64360";
-		clock-frequency = <133333333>;
-		reg = <0xf1000000 0x10000>;
-		virtual-reg = <0xf1000000>;
-		ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
-			  0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
-			  0xa0000000 0xa0000000 0x4000000 /* User FLASH */
-			  0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
-			  0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
-
-		flash@a0000000 {
-			device_type = "rom";
-			compatible = "direct-mapped";
-			reg = <0xa0000000 0x4000000>; /* Default (64MB) */
-			probe-type = "CFI";
-			bank-width = <4>;
-			partitions = <0x00000000 0x00100000 /* RO */
-				      0x00100000 0x00040001 /* RW */
-				      0x00140000 0x00400000 /* RO */
-				      0x00540000 0x039c0000 /* RO */
-				      0x03f00000 0x00100000>; /* RO */
-			partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B";
-		};
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "marvell,mv64360-mdio";
-			PHY0: ethernet-phy@1 {
-				compatible = "broadcom,bcm5421";
-				interrupts = <76>;	/* GPP 12 */
-				interrupt-parent = <&PIC>;
-				reg = <1>;
-			};
-			PHY1: ethernet-phy@3 {
-				compatible = "broadcom,bcm5421";
-				interrupts = <76>;	/* GPP 12 */
-				interrupt-parent = <&PIC>;
-				reg = <3>;
-			};
-		};
-
-		ethernet-group@2000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "marvell,mv64360-eth-group";
-			reg = <0x2000 0x2000>;
-			ethernet@0 {
-				device_type = "network";
-				compatible = "marvell,mv64360-eth";
-				reg = <0>;
-				interrupts = <32>;
-				interrupt-parent = <&PIC>;
-				phy = <&PHY0>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-			};
-			ethernet@1 {
-				device_type = "network";
-				compatible = "marvell,mv64360-eth";
-				reg = <1>;
-				interrupts = <33>;
-				interrupt-parent = <&PIC>;
-				phy = <&PHY1>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-			};
-		};
-
-		SDMA0: sdma@4000 {
-			compatible = "marvell,mv64360-sdma";
-			reg = <0x4000 0xc18>;
-			virtual-reg = <0xf1004000>;
-			interrupts = <36>;
-			interrupt-parent = <&PIC>;
-		};
-
-		SDMA1: sdma@6000 {
-			compatible = "marvell,mv64360-sdma";
-			reg = <0x6000 0xc18>;
-			virtual-reg = <0xf1006000>;
-			interrupts = <38>;
-			interrupt-parent = <&PIC>;
-		};
-
-		BRG0: brg@b200 {
-			compatible = "marvell,mv64360-brg";
-			reg = <0xb200 0x8>;
-			clock-src = <8>;
-			clock-frequency = <133333333>;
-			current-speed = <9600>;
-		};
-
-		BRG1: brg@b208 {
-			compatible = "marvell,mv64360-brg";
-			reg = <0xb208 0x8>;
-			clock-src = <8>;
-			clock-frequency = <133333333>;
-			current-speed = <9600>;
-		};
-
-		CUNIT: cunit@f200 {
-			reg = <0xf200 0x200>;
-		};
-
-		MPSCROUTING: mpscrouting@b400 {
-			reg = <0xb400 0xc>;
-		};
-
-		MPSCINTR: mpscintr@b800 {
-			reg = <0xb800 0x100>;
-			virtual-reg = <0xf100b800>;
-		};
-
-		MPSC0: mpsc@8000 {
-			compatible = "marvell,mv64360-mpsc";
-			reg = <0x8000 0x38>;
-			virtual-reg = <0xf1008000>;
-			sdma = <&SDMA0>;
-			brg = <&BRG0>;
-			cunit = <&CUNIT>;
-			mpscrouting = <&MPSCROUTING>;
-			mpscintr = <&MPSCINTR>;
-			cell-index = <0>;
-			interrupts = <40>;
-			interrupt-parent = <&PIC>;
-		};
-
-		MPSC1: mpsc@9000 {
-			compatible = "marvell,mv64360-mpsc";
-			reg = <0x9000 0x38>;
-			virtual-reg = <0xf1009000>;
-			sdma = <&SDMA1>;
-			brg = <&BRG1>;
-			cunit = <&CUNIT>;
-			mpscrouting = <&MPSCROUTING>;
-			mpscintr = <&MPSCINTR>;
-			cell-index = <1>;
-			interrupts = <42>;
-			interrupt-parent = <&PIC>;
-		};
-
-		wdt@b410 {			/* watchdog timer */
-			compatible = "marvell,mv64360-wdt";
-			reg = <0xb410 0x8>;
-		};
-
-		i2c@c000 {
-			device_type = "i2c";
-			compatible = "marvell,mv64360-i2c";
-			reg = <0xc000 0x20>;
-			virtual-reg = <0xf100c000>;
-			interrupts = <37>;
-			interrupt-parent = <&PIC>;
-		};
-
-		PIC: pic {
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			compatible = "marvell,mv64360-pic";
-			reg = <0x0 0x88>;
-			interrupt-controller;
-		};
-
-		mpp@f000 {
-			compatible = "marvell,mv64360-mpp";
-			reg = <0xf000 0x10>;
-		};
-
-		gpp@f100 {
-			compatible = "marvell,mv64360-gpp";
-			reg = <0xf100 0x20>;
-		};
-
-		pci@80000000 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			device_type = "pci";
-			compatible = "marvell,mv64360-pci";
-			reg = <0xcf8 0x8>;
-			ranges = <0x01000000 0x0        0x0
-					0x88000000 0x0 0x01000000
-				  0x02000000 0x0 0x80000000
-				  	0x80000000 0x0 0x08000000>;
-			bus-range = <0 255>;
-			clock-frequency = <66000000>;
-			interrupt-pci-iack = <0xc34>;
-			interrupt-parent = <&PIC>;
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <
-				/* IDSEL 0x0a */
-				0x5000 0 0 1 &PIC 80
-				0x5000 0 0 2 &PIC 81
-				0x5000 0 0 3 &PIC 91
-				0x5000 0 0 4 &PIC 93
-
-				/* IDSEL 0x0b */
-				0x5800 0 0 1 &PIC 91
-				0x5800 0 0 2 &PIC 93
-				0x5800 0 0 3 &PIC 80
-				0x5800 0 0 4 &PIC 81
-
-				/* IDSEL 0x0c */
-				0x6000 0 0 1 &PIC 91
-				0x6000 0 0 2 &PIC 93
-				0x6000 0 0 3 &PIC 80
-				0x6000 0 0 4 &PIC 81
-
-				/* IDSEL 0x0d */
-				0x6800 0 0 1 &PIC 93
-				0x6800 0 0 2 &PIC 80
-				0x6800 0 0 3 &PIC 81
-				0x6800 0 0 4 &PIC 91
-			>;
-		};
-
-		cpu-error@0070 {
-			compatible = "marvell,mv64360-cpu-error";
-			reg = <0x70 0x10 0x128 0x28>;
-			interrupts = <3>;
-			interrupt-parent = <&PIC>;
-		};
-
-		sram-ctrl@0380 {
-			compatible = "marvell,mv64360-sram-ctrl";
-			reg = <0x380 0x80>;
-			interrupts = <13>;
-			interrupt-parent = <&PIC>;
-		};
-
-		pci-error@1d40 {
-			compatible = "marvell,mv64360-pci-error";
-			reg = <0x1d40 0x40 0xc28 0x4>;
-			interrupts = <12>;
-			interrupt-parent = <&PIC>;
-		};
-
-		mem-ctrl@1400 {
-			compatible = "marvell,mv64360-mem-ctrl";
-			reg = <0x1400 0x60>;
-			interrupts = <17>;
-			interrupt-parent = <&PIC>;
-		};
-	};
-
-	chosen {
-		bootargs = "ip=on";
-		linux,stdout-path = &MPSC0;
-	};
-};
diff --git a/arch/powerpc/boot/page.h b/arch/powerpc/boot/page.h
index 14eca30..87c42d7 100644
--- a/arch/powerpc/boot/page.h
+++ b/arch/powerpc/boot/page.h
@@ -22,8 +22,8 @@
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 
 /* align addr on a size boundary - adjust address up/down if needed */
-#define _ALIGN_UP(addr,size)	(((addr)+((size)-1))&(~((size)-1)))
-#define _ALIGN_DOWN(addr,size)	((addr)&(~((size)-1)))
+#define _ALIGN_UP(addr, size)	(((addr)+((size)-1))&(~((typeof(addr))(size)-1)))
+#define _ALIGN_DOWN(addr, size)	((addr)&(~((typeof(addr))(size)-1)))
 
 /* align addr on a size boundary - adjust address up if needed */
 #define _ALIGN(addr,size)     _ALIGN_UP(addr,size)
diff --git a/arch/powerpc/boot/prpmc2800.c b/arch/powerpc/boot/prpmc2800.c
deleted file mode 100644
index da31d60..0000000
--- a/arch/powerpc/boot/prpmc2800.c
+++ /dev/null
@@ -1,571 +0,0 @@
-/*
- * Motorola ECC prpmc280/f101 & prpmc2800/f101e platform code.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2007 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <stdarg.h>
-#include <stddef.h>
-#include "types.h"
-#include "elf.h"
-#include "page.h"
-#include "string.h"
-#include "stdio.h"
-#include "io.h"
-#include "ops.h"
-#include "gunzip_util.h"
-#include "mv64x60.h"
-
-#define KB	1024U
-#define MB	(KB*KB)
-#define GB	(KB*MB)
-#define MHz	(1000U*1000U)
-#define GHz	(1000U*MHz)
-
-#define BOARD_MODEL	"PrPMC2800"
-#define BOARD_MODEL_MAX	32 /* max strlen(BOARD_MODEL) + 1 */
-
-#define EEPROM2_ADDR	0xa4
-#define EEPROM3_ADDR	0xa8
-
-BSS_STACK(16*KB);
-
-static u8 *bridge_base;
-
-typedef enum {
-	BOARD_MODEL_PRPMC280,
-	BOARD_MODEL_PRPMC2800,
-} prpmc2800_board_model;
-
-typedef enum {
-	BRIDGE_TYPE_MV64360,
-	BRIDGE_TYPE_MV64362,
-} prpmc2800_bridge_type;
-
-struct prpmc2800_board_info {
-	prpmc2800_board_model model;
-	char variant;
-	prpmc2800_bridge_type bridge_type;
-	u8 subsys0;
-	u8 subsys1;
-	u8 vpd4;
-	u8 vpd4_mask;
-	u32 core_speed;
-	u32 mem_size;
-	u32 boot_flash;
-	u32 user_flash;
-};
-
-static struct prpmc2800_board_info prpmc2800_board_info[] = {
-	{
-		.model		= BOARD_MODEL_PRPMC280,
-		.variant	= 'a',
-		.bridge_type	= BRIDGE_TYPE_MV64360,
-		.subsys0	= 0xff,
-		.subsys1	= 0xff,
-		.vpd4		= 0x00,
-		.vpd4_mask	= 0x0f,
-		.core_speed	= 1*GHz,
-		.mem_size	= 512*MB,
-		.boot_flash	= 1*MB,
-		.user_flash	= 64*MB,
-	},
-	{
-		.model		= BOARD_MODEL_PRPMC280,
-		.variant	= 'b',
-		.bridge_type	= BRIDGE_TYPE_MV64362,
-		.subsys0	= 0xff,
-		.subsys1	= 0xff,
-		.vpd4		= 0x01,
-		.vpd4_mask	= 0x0f,
-		.core_speed	= 1*GHz,
-		.mem_size	= 512*MB,
-		.boot_flash	= 0,
-		.user_flash	= 0,
-	},
-	{
-		.model		= BOARD_MODEL_PRPMC280,
-		.variant	= 'c',
-		.bridge_type	= BRIDGE_TYPE_MV64360,
-		.subsys0	= 0xff,
-		.subsys1	= 0xff,
-		.vpd4		= 0x02,
-		.vpd4_mask	= 0x0f,
-		.core_speed	= 733*MHz,
-		.mem_size	= 512*MB,
-		.boot_flash	= 1*MB,
-		.user_flash	= 64*MB,
-	},
-	{
-		.model		= BOARD_MODEL_PRPMC280,
-		.variant	= 'd',
-		.bridge_type	= BRIDGE_TYPE_MV64360,
-		.subsys0	= 0xff,
-		.subsys1	= 0xff,
-		.vpd4		= 0x03,
-		.vpd4_mask	= 0x0f,
-		.core_speed	= 1*GHz,
-		.mem_size	= 1*GB,
-		.boot_flash	= 1*MB,
-		.user_flash	= 64*MB,
-	},
-	{
-		.model		= BOARD_MODEL_PRPMC280,
-		.variant	= 'e',
-		.bridge_type	= BRIDGE_TYPE_MV64360,
-		.subsys0	= 0xff,
-		.subsys1	= 0xff,
-		.vpd4		= 0x04,
-		.vpd4_mask	= 0x0f,
-		.core_speed	= 1*GHz,
-		.mem_size	= 512*MB,
-		.boot_flash	= 1*MB,
-		.user_flash	= 64*MB,
-	},
-	{
-		.model		= BOARD_MODEL_PRPMC280,
-		.variant	= 'f',
-		.bridge_type	= BRIDGE_TYPE_MV64362,
-		.subsys0	= 0xff,
-		.subsys1	= 0xff,
-		.vpd4		= 0x05,
-		.vpd4_mask	= 0x0f,
-		.core_speed	= 733*MHz,
-		.mem_size	= 128*MB,
-		.boot_flash	= 1*MB,
-		.user_flash	= 0,
-	},
-	{
-		.model		= BOARD_MODEL_PRPMC280,
-		.variant	= 'g',
-		.bridge_type	= BRIDGE_TYPE_MV64360,
-		.subsys0	= 0xff,
-		.subsys1	= 0xff,
-		.vpd4		= 0x06,
-		.vpd4_mask	= 0x0f,
-		.core_speed	= 1*GHz,
-		.mem_size	= 256*MB,
-		.boot_flash	= 1*MB,
-		.user_flash	= 0,
-	},
-	{
-		.model		= BOARD_MODEL_PRPMC280,
-		.variant	= 'h',
-		.bridge_type	= BRIDGE_TYPE_MV64360,
-		.subsys0	= 0xff,
-		.subsys1	= 0xff,
-		.vpd4		= 0x07,
-		.vpd4_mask	= 0x0f,
-		.core_speed	= 1*GHz,
-		.mem_size	= 1*GB,
-		.boot_flash	= 1*MB,
-		.user_flash	= 64*MB,
-	},
-	{
-		.model		= BOARD_MODEL_PRPMC2800,
-		.variant	= 'a',
-		.bridge_type	= BRIDGE_TYPE_MV64360,
-		.subsys0	= 0xb2,
-		.subsys1	= 0x8c,
-		.vpd4		= 0x00,
-		.vpd4_mask	= 0x00,
-		.core_speed	= 1*GHz,
-		.mem_size	= 512*MB,
-		.boot_flash	= 2*MB,
-		.user_flash	= 64*MB,
-	},
-	{
-		.model		= BOARD_MODEL_PRPMC2800,
-		.variant	= 'b',
-		.bridge_type	= BRIDGE_TYPE_MV64362,
-		.subsys0	= 0xb2,
-		.subsys1	= 0x8d,
-		.vpd4		= 0x00,
-		.vpd4_mask	= 0x00,
-		.core_speed	= 1*GHz,
-		.mem_size	= 512*MB,
-		.boot_flash	= 0,
-		.user_flash	= 0,
-	},
-	{
-		.model		= BOARD_MODEL_PRPMC2800,
-		.variant	= 'c',
-		.bridge_type	= BRIDGE_TYPE_MV64360,
-		.subsys0	= 0xb2,
-		.subsys1	= 0x8e,
-		.vpd4		= 0x00,
-		.vpd4_mask	= 0x00,
-		.core_speed	= 733*MHz,
-		.mem_size	= 512*MB,
-		.boot_flash	= 2*MB,
-		.user_flash	= 64*MB,
-	},
-	{
-		.model		= BOARD_MODEL_PRPMC2800,
-		.variant	= 'd',
-		.bridge_type	= BRIDGE_TYPE_MV64360,
-		.subsys0	= 0xb2,
-		.subsys1	= 0x8f,
-		.vpd4		= 0x00,
-		.vpd4_mask	= 0x00,
-		.core_speed	= 1*GHz,
-		.mem_size	= 1*GB,
-		.boot_flash	= 2*MB,
-		.user_flash	= 64*MB,
-	},
-	{
-		.model		= BOARD_MODEL_PRPMC2800,
-		.variant	= 'e',
-		.bridge_type	= BRIDGE_TYPE_MV64360,
-		.subsys0	= 0xa2,
-		.subsys1	= 0x8a,
-		.vpd4		= 0x00,
-		.vpd4_mask	= 0x00,
-		.core_speed	= 1*GHz,
-		.mem_size	= 512*MB,
-		.boot_flash	= 2*MB,
-		.user_flash	= 64*MB,
-	},
-	{
-		.model		= BOARD_MODEL_PRPMC2800,
-		.variant	= 'f',
-		.bridge_type	= BRIDGE_TYPE_MV64362,
-		.subsys0	= 0xa2,
-		.subsys1	= 0x8b,
-		.vpd4		= 0x00,
-		.vpd4_mask	= 0x00,
-		.core_speed	= 733*MHz,
-		.mem_size	= 128*MB,
-		.boot_flash	= 2*MB,
-		.user_flash	= 0,
-	},
-	{
-		.model		= BOARD_MODEL_PRPMC2800,
-		.variant	= 'g',
-		.bridge_type	= BRIDGE_TYPE_MV64360,
-		.subsys0	= 0xa2,
-		.subsys1	= 0x8c,
-		.vpd4		= 0x00,
-		.vpd4_mask	= 0x00,
-		.core_speed	= 1*GHz,
-		.mem_size	= 2*GB,
-		.boot_flash	= 2*MB,
-		.user_flash	= 64*MB,
-	},
-	{
-		.model		= BOARD_MODEL_PRPMC2800,
-		.variant	= 'h',
-		.bridge_type	= BRIDGE_TYPE_MV64360,
-		.subsys0	= 0xa2,
-		.subsys1	= 0x8d,
-		.vpd4		= 0x00,
-		.vpd4_mask	= 0x00,
-		.core_speed	= 733*MHz,
-		.mem_size	= 1*GB,
-		.boot_flash	= 2*MB,
-		.user_flash	= 64*MB,
-	},
-};
-
-static struct prpmc2800_board_info *prpmc2800_get_board_info(u8 *vpd)
-{
-	struct prpmc2800_board_info *bip;
-	int i;
-
-	for (i=0,bip=prpmc2800_board_info; i<ARRAY_SIZE(prpmc2800_board_info);
-			i++,bip++)
-		if ((vpd[0] == bip->subsys0) && (vpd[1] == bip->subsys1)
-				&& ((vpd[4] & bip->vpd4_mask) == bip->vpd4))
-			return bip;
-
-	return NULL;
-}
-
-/* Get VPD from i2c eeprom 2, then match it to a board info entry */
-static struct prpmc2800_board_info *prpmc2800_get_bip(void)
-{
-	struct prpmc2800_board_info *bip;
-	u8 vpd[5];
-	int rc;
-
-	if (mv64x60_i2c_open())
-		fatal("Error: Can't open i2c device\n\r");
-
-	/* Get VPD from i2c eeprom-2 */
-	memset(vpd, 0, sizeof(vpd));
-	rc = mv64x60_i2c_read(EEPROM2_ADDR, vpd, 0x1fde, 2, sizeof(vpd));
-	if (rc < 0)
-		fatal("Error: Couldn't read eeprom2\n\r");
-	mv64x60_i2c_close();
-
-	/* Get board type & related info */
-	bip = prpmc2800_get_board_info(vpd);
-	if (bip == NULL) {
-		printf("Error: Unsupported board or corrupted VPD:\n\r");
-		printf("  0x%x 0x%x 0x%x 0x%x 0x%x\n\r",
-				vpd[0], vpd[1], vpd[2], vpd[3], vpd[4]);
-		printf("Using device tree defaults...\n\r");
-	}
-
-	return bip;
-}
-
-static void prpmc2800_bridge_setup(u32 mem_size)
-{
-	u32 i, v[12], enables, acc_bits;
-	u32 pci_base_hi, pci_base_lo, size, buf[2];
-	unsigned long cpu_base;
-	int rc;
-	void *devp;
-	u8 *bridge_pbase, is_coherent;
-	struct mv64x60_cpu2pci_win *tbl;
-
-	bridge_pbase = mv64x60_get_bridge_pbase();
-	is_coherent = mv64x60_is_coherent();
-
-	if (is_coherent)
-		acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_WB
-			| MV64x60_PCI_ACC_CNTL_SWAP_NONE
-			| MV64x60_PCI_ACC_CNTL_MBURST_32_BYTES
-			| MV64x60_PCI_ACC_CNTL_RDSIZE_32_BYTES;
-	else
-		acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_NONE
-			| MV64x60_PCI_ACC_CNTL_SWAP_NONE
-			| MV64x60_PCI_ACC_CNTL_MBURST_128_BYTES
-			| MV64x60_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-
-	mv64x60_config_ctlr_windows(bridge_base, bridge_pbase, is_coherent);
-	mv64x60_config_pci_windows(bridge_base, bridge_pbase, 0, 0, mem_size,
-			acc_bits);
-
-	/* Get the cpu -> pci i/o & mem mappings from the device tree */
-	devp = find_node_by_compatible(NULL, "marvell,mv64360-pci");
-	if (devp == NULL)
-		fatal("Error: Missing marvell,mv64360-pci"
-				" device tree node\n\r");
-
-	rc = getprop(devp, "ranges", v, sizeof(v));
-	if (rc != sizeof(v))
-		fatal("Error: Can't find marvell,mv64360-pci ranges"
-				" property\n\r");
-
-	/* Get the cpu -> pci i/o & mem mappings from the device tree */
-	devp = find_node_by_compatible(NULL, "marvell,mv64360");
-	if (devp == NULL)
-		fatal("Error: Missing marvell,mv64360 device tree node\n\r");
-
-	enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE));
-	enables |= 0x0007fe00; /* Disable all cpu->pci windows */
-	out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE), enables);
-
-	for (i=0; i<12; i+=6) {
-		switch (v[i] & 0xff000000) {
-		case 0x01000000: /* PCI I/O Space */
-			tbl = mv64x60_cpu2pci_io;
-			break;
-		case 0x02000000: /* PCI MEM Space */
-			tbl = mv64x60_cpu2pci_mem;
-			break;
-		default:
-			continue;
-		}
-
-		pci_base_hi = v[i+1];
-		pci_base_lo = v[i+2];
-		cpu_base = v[i+3];
-		size = v[i+5];
-
-		buf[0] = cpu_base;
-		buf[1] = size;
-
-		if (!dt_xlate_addr(devp, buf, sizeof(buf), &cpu_base))
-			fatal("Error: Can't translate PCI address 0x%x\n\r",
-					(u32)cpu_base);
-
-		mv64x60_config_cpu2pci_window(bridge_base, 0, pci_base_hi,
-				pci_base_lo, cpu_base, size, tbl);
-	}
-
-	enables &= ~0x00000600; /* Enable cpu->pci0 i/o, cpu->pci0 mem0 */
-	out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE), enables);
-}
-
-static void prpmc2800_fixups(void)
-{
-	u32 v[2], l, mem_size;
-	int rc;
-	void *devp;
-	char model[BOARD_MODEL_MAX];
-	struct prpmc2800_board_info *bip;
-
-	bip = prpmc2800_get_bip(); /* Get board info based on VPD */
-
-	mem_size = (bip) ? bip->mem_size : mv64x60_get_mem_size(bridge_base);
-	prpmc2800_bridge_setup(mem_size); /* Do necessary bridge setup */
-
-	/* If the VPD doesn't match what we know about, just use the
-	 * defaults already in the device tree.
-	 */
-	if (!bip)
-		return;
-
-	/* Know the board type so override device tree defaults */
-	/* Set /model appropriately */
-	devp = finddevice("/");
-	if (devp == NULL)
-		fatal("Error: Missing '/' device tree node\n\r");
-	memset(model, 0, BOARD_MODEL_MAX);
-	strncpy(model, BOARD_MODEL, BOARD_MODEL_MAX - 2);
-	l = strlen(model);
-	if (bip->model == BOARD_MODEL_PRPMC280)
-		l--;
-	model[l++] = bip->variant;
-	model[l++] = '\0';
-	setprop(devp, "model", model, l);
-
-	/* Set /cpus/PowerPC,7447/clock-frequency */
-	devp = find_node_by_prop_value_str(NULL, "device_type", "cpu");
-	if (devp == NULL)
-		fatal("Error: Missing proper cpu device tree node\n\r");
-	v[0] = bip->core_speed;
-	setprop(devp, "clock-frequency", &v[0], sizeof(v[0]));
-
-	/* Set /memory/reg size */
-	devp = finddevice("/memory");
-	if (devp == NULL)
-		fatal("Error: Missing /memory device tree node\n\r");
-	v[0] = 0;
-	v[1] = bip->mem_size;
-	setprop(devp, "reg", v, sizeof(v));
-
-	/* Update model, if this is a mv64362 */
-	if (bip->bridge_type == BRIDGE_TYPE_MV64362) {
-		devp = find_node_by_compatible(NULL, "marvell,mv64360");
-		if (devp == NULL)
-			fatal("Error: Missing marvell,mv64360"
-					" device tree node\n\r");
-		setprop(devp, "model", "mv64362", strlen("mv64362") + 1);
-	}
-
-	/* Set User FLASH size */
-	devp = find_node_by_compatible(NULL, "direct-mapped");
-	if (devp == NULL)
-		fatal("Error: Missing User FLASH device tree node\n\r");
-	rc = getprop(devp, "reg", v, sizeof(v));
-	if (rc != sizeof(v))
-		fatal("Error: Can't find User FLASH reg property\n\r");
-	v[1] = bip->user_flash;
-	setprop(devp, "reg", v, sizeof(v));
-}
-
-#define MV64x60_MPP_CNTL_0	0xf000
-#define MV64x60_MPP_CNTL_2	0xf008
-#define MV64x60_GPP_IO_CNTL	0xf100
-#define MV64x60_GPP_LEVEL_CNTL	0xf110
-#define MV64x60_GPP_VALUE_SET	0xf118
-
-static void prpmc2800_reset(void)
-{
-	u32 temp;
-
-	udelay(5000000);
-
-	if (bridge_base != 0) {
-		temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0));
-		temp &= 0xFFFF0FFF;
-		out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0), temp);
-
-		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
-		temp |= 0x00000004;
-		out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
-
-		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
-		temp |= 0x00000004;
-		out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
-
-		temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2));
-		temp &= 0xFFFF0FFF;
-		out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2), temp);
-
-		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
-		temp |= 0x00080000;
-		out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
-
-		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
-		temp |= 0x00080000;
-		out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
-
-		out_le32((u32 *)(bridge_base + MV64x60_GPP_VALUE_SET),
-				0x00080004);
-	}
-
-	for (;;);
-}
-
-#define HEAP_SIZE	(16*MB)
-static struct gunzip_state gzstate;
-
-void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-                   unsigned long r6, unsigned long r7)
-{
-	struct elf_info ei;
-	char *heap_start, *dtb;
-	int dt_size = _dtb_end - _dtb_start;
-	void *vmlinuz_addr = _vmlinux_start;
-	unsigned long vmlinuz_size = _vmlinux_end - _vmlinux_start;
-	char elfheader[256];
-
-	if (dt_size <= 0) /* No fdt */
-		exit();
-
-	/*
-	 * Start heap after end of the kernel (after decompressed to
-	 * address 0) or the end of the zImage, whichever is higher.
-	 * That's so things allocated by simple_alloc won't overwrite
-	 * any part of the zImage and the kernel won't overwrite the dtb
-	 * when decompressed & relocated.
-	 */
-	gunzip_start(&gzstate, vmlinuz_addr, vmlinuz_size);
-	gunzip_exactly(&gzstate, elfheader, sizeof(elfheader));
-
-	if (!parse_elf32(elfheader, &ei))
-		exit();
-
-	heap_start = (char *)(ei.memsize + ei.elfoffset); /* end of kernel*/
-	heap_start = max(heap_start, (char *)_end); /* end of zImage */
-
-	if ((unsigned)simple_alloc_init(heap_start, HEAP_SIZE, 2*KB, 16)
-			> (128*MB))
-		exit();
-
-	/* Relocate dtb to safe area past end of zImage & kernel */
-	dtb = malloc(dt_size);
-	if (!dtb)
-		exit();
-	memmove(dtb, _dtb_start, dt_size);
-	fdt_init(dtb);
-
-	bridge_base = mv64x60_get_bridge_base();
-
-	platform_ops.fixups = prpmc2800_fixups;
-	platform_ops.exit = prpmc2800_reset;
-
-	if (serial_console_init() < 0)
-		exit();
-}
-
-/* _zimage_start called very early--need to turn off external interrupts */
-asm ("	.globl _zimage_start\n\
-	_zimage_start:\n\
-		mfmsr	10\n\
-		rlwinm	10,10,0,~(1<<15)	/* Clear MSR_EE */\n\
-		sync\n\
-		mtmsr	10\n\
-		isync\n\
-		b _zimage_start_lib\n\
-");
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 3f50c27..ceaa75d 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -63,6 +63,23 @@ usage() {
     exit 1
 }
 
+run_cmd() {
+    if [ "$V" = 1 ]; then
+        $* 2>&1
+    else
+        local msg
+
+        set +e
+        msg=$($* 2>&1)
+
+        if [ $? -ne "0" ]; then
+                echo $msg
+                exit 1
+        fi
+        set -e
+    fi
+}
+
 while [ "$#" -gt 0 ]; do
     case "$1" in
     -o)
@@ -456,12 +473,12 @@ ps3)
 
     ${CROSS}objcopy -O binary "$ofile" "$ofile.bin"
 
-    dd if="$ofile.bin" of="$ofile.bin" conv=notrunc   \
-        skip=$overlay_dest seek=$system_reset_kernel  \
+    run_cmd dd if="$ofile.bin" of="$ofile.bin" conv=notrunc   \
+        skip=$overlay_dest seek=$system_reset_kernel          \
         count=$overlay_size bs=1
 
-    dd if="$ofile.bin" of="$ofile.bin" conv=notrunc   \
-        skip=$system_reset_overlay seek=$overlay_dest \
+    run_cmd dd if="$ofile.bin" of="$ofile.bin" conv=notrunc   \
+        skip=$system_reset_overlay seek=$overlay_dest         \
         count=$overlay_size bs=1
 
     odir="$(dirname "$ofile.bin")"
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index 9227b51..db328e6 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -1,5 +1,5 @@
 CONFIG_PPC64=y
-CONFIG_TUNE_CELL=y
+CONFIG_CELL_CPU=y
 CONFIG_ALTIVEC=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
diff --git a/arch/powerpc/configs/mpc512x_defconfig b/arch/powerpc/configs/mpc512x_defconfig
index 59b85cb..d16d6c5 100644
--- a/arch/powerpc/configs/mpc512x_defconfig
+++ b/arch/powerpc/configs/mpc512x_defconfig
@@ -112,6 +112,7 @@ CONFIG_RTC_DRV_M41T80=y
 CONFIG_RTC_DRV_MPC5121=y
 CONFIG_DMADEVICES=y
 CONFIG_MPC512X_DMA=y
+CONFIG_MPC512x_LPBFIFO=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XIP=y
 CONFIG_EXT3_FS=y
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index adc14e8..c400460 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,5 +1,5 @@
 CONFIG_PPC64=y
-CONFIG_TUNE_CELL=y
+CONFIG_CELL_CPU=y
 CONFIG_ALTIVEC=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
@@ -53,7 +53,6 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
 CONFIG_BT=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
@@ -141,8 +140,6 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PS3=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT4_FS=y
 CONFIG_QUOTA=y
 CONFIG_QFMT_V2=y
@@ -175,9 +172,7 @@ CONFIG_DEBUG_LOCKDEP=y
 CONFIG_DEBUG_LIST=y
 CONFIG_RCU_CPU_STALL_TIMEOUT=60
 # CONFIG_FTRACE is not set
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_LZO=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h
index a8b52b6..a703452 100644
--- a/arch/powerpc/include/asm/exception-64e.h
+++ b/arch/powerpc/include/asm/exception-64e.h
@@ -69,13 +69,14 @@
 #define EX_TLB_ESR	( 9 * 8) /* Level 0 and 2 only */
 #define EX_TLB_SRR0	(10 * 8)
 #define EX_TLB_SRR1	(11 * 8)
+#define EX_TLB_R7	(12 * 8)
 #ifdef CONFIG_BOOK3E_MMU_TLB_STATS
-#define EX_TLB_R8	(12 * 8)
-#define EX_TLB_R9	(13 * 8)
-#define EX_TLB_LR	(14 * 8)
-#define EX_TLB_SIZE	(15 * 8)
+#define EX_TLB_R8	(13 * 8)
+#define EX_TLB_R9	(14 * 8)
+#define EX_TLB_LR	(15 * 8)
+#define EX_TLB_SIZE	(16 * 8)
 #else
-#define EX_TLB_SIZE	(12 * 8)
+#define EX_TLB_SIZE	(13 * 8)
 #endif
 
 #define	START_EXCEPTION(label)						\
@@ -204,8 +205,8 @@ exc_##label##_book3e:
 #endif
 
 #define SET_IVOR(vector_number, vector_offset)	\
-	li	r3,vector_offset@l; 		\
-	ori	r3,r3,interrupt_base_book3e@l;	\
+	LOAD_REG_ADDR(r3,interrupt_base_book3e);\
+	ori	r3,r3,vector_offset@l;		\
 	mtspr	SPRN_IVOR##vector_number,r3;
 
 #endif /* _ASM_POWERPC_EXCEPTION_64E_H */
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index a82f534..ba3342b 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -14,6 +14,7 @@
 
 #include <asm/asm-compat.h>
 #include <asm/page.h>
+#include <asm/bug.h>
 
 /*
  * This is necessary to get the definition of PGTABLE_RANGE which we
diff --git a/arch/powerpc/include/asm/mpc5121.h b/arch/powerpc/include/asm/mpc5121.h
index 4a69cd1..deaeb0b 100644
--- a/arch/powerpc/include/asm/mpc5121.h
+++ b/arch/powerpc/include/asm/mpc5121.h
@@ -60,4 +60,63 @@ struct mpc512x_lpc {
 
 int mpc512x_cs_config(unsigned int cs, u32 val);
 
+/*
+ * SCLPC Module (LPB FIFO)
+ */
+struct mpc512x_lpbfifo {
+	u32	pkt_size;	/* SCLPC Packet Size Register */
+	u32	start_addr;	/* SCLPC Start Address Register */
+	u32	ctrl;		/* SCLPC Control Register */
+	u32	enable;		/* SCLPC Enable Register */
+	u32	reserved1;
+	u32	status;		/* SCLPC Status Register */
+	u32	bytes_done;	/* SCLPC Bytes Done Register */
+	u32	emb_sc;		/* EMB Share Counter Register */
+	u32	emb_pc;		/* EMB Pause Control Register */
+	u32	reserved2[7];
+	u32	data_word;	/* LPC RX/TX FIFO Data Word Register */
+	u32	fifo_status;	/* LPC RX/TX FIFO Status Register */
+	u32	fifo_ctrl;	/* LPC RX/TX FIFO Control Register */
+	u32	fifo_alarm;	/* LPC RX/TX FIFO Alarm Register */
+};
+
+#define MPC512X_SCLPC_START		(1 << 31)
+#define MPC512X_SCLPC_CS(x)		(((x) & 0x7) << 24)
+#define MPC512X_SCLPC_FLUSH		(1 << 17)
+#define MPC512X_SCLPC_READ		(1 << 16)
+#define MPC512X_SCLPC_DAI		(1 << 8)
+#define MPC512X_SCLPC_BPT(x)		((x) & 0x3f)
+#define MPC512X_SCLPC_RESET		(1 << 24)
+#define MPC512X_SCLPC_FIFO_RESET	(1 << 16)
+#define MPC512X_SCLPC_ABORT_INT_ENABLE	(1 << 9)
+#define MPC512X_SCLPC_NORM_INT_ENABLE	(1 << 8)
+#define MPC512X_SCLPC_ENABLE		(1 << 0)
+#define MPC512X_SCLPC_SUCCESS		(1 << 24)
+#define MPC512X_SCLPC_FIFO_CTRL(x)	(((x) & 0x7) << 24)
+#define MPC512X_SCLPC_FIFO_ALARM(x)	((x) & 0x3ff)
+
+enum lpb_dev_portsize {
+	LPB_DEV_PORTSIZE_UNDEFINED = 0,
+	LPB_DEV_PORTSIZE_1_BYTE = 1,
+	LPB_DEV_PORTSIZE_2_BYTES = 2,
+	LPB_DEV_PORTSIZE_4_BYTES = 4,
+	LPB_DEV_PORTSIZE_8_BYTES = 8
+};
+
+enum mpc512x_lpbfifo_req_dir {
+	MPC512X_LPBFIFO_REQ_DIR_READ,
+	MPC512X_LPBFIFO_REQ_DIR_WRITE
+};
+
+struct mpc512x_lpbfifo_request {
+	phys_addr_t dev_phys_addr; /* physical address of some device on LPB */
+	void *ram_virt_addr; /* virtual address of some region in RAM */
+	u32 size;
+	enum lpb_dev_portsize portsize;
+	enum mpc512x_lpbfifo_req_dir dir;
+	void (*callback)(struct mpc512x_lpbfifo_request *);
+};
+
+int mpc512x_lpbfifo_submit(struct mpc512x_lpbfifo_request *req);
+
 #endif /* __ASM_POWERPC_MPC5121_H__ */
diff --git a/arch/powerpc/include/asm/mpc52xx_psc.h b/arch/powerpc/include/asm/mpc52xx_psc.h
index 04c7e8f..ec995b2 100644
--- a/arch/powerpc/include/asm/mpc52xx_psc.h
+++ b/arch/powerpc/include/asm/mpc52xx_psc.h
@@ -261,8 +261,6 @@ struct mpc52xx_psc_fifo {
 #define MPC512x_PSC_FIFO_FULL		0x2
 #define MPC512x_PSC_FIFO_ALARM		0x4
 #define MPC512x_PSC_FIFO_URERR		0x8
-#define MPC512x_PSC_FIFO_ORERR		0x01
-#define MPC512x_PSC_FIFO_MEMERROR	0x02
 
 struct mpc512x_psc_fifo {
 	u32		reserved1[10];
diff --git a/arch/powerpc/include/asm/msi_bitmap.h b/arch/powerpc/include/asm/msi_bitmap.h
index 97ac3f4..1ec7125 100644
--- a/arch/powerpc/include/asm/msi_bitmap.h
+++ b/arch/powerpc/include/asm/msi_bitmap.h
@@ -19,6 +19,7 @@ struct msi_bitmap {
 	unsigned long		*bitmap;
 	spinlock_t		lock;
 	unsigned int		irq_count;
+	bool		 	bitmap_from_slab;
 };
 
 int msi_bitmap_alloc_hwirqs(struct msi_bitmap *bmp, int num);
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index 71294a6..3140c19 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -12,6 +12,7 @@
 
 #ifndef __ASSEMBLY__
 #include <linux/types.h>
+#include <linux/kernel.h>
 #else
 #include <asm/types.h>
 #endif
@@ -107,12 +108,13 @@ extern long long virt_phys_offset;
 #endif
 
 /* See Description below for VIRT_PHYS_OFFSET */
-#ifdef CONFIG_RELOCATABLE_PPC32
+#if defined(CONFIG_PPC32) && defined(CONFIG_BOOKE)
+#ifdef CONFIG_RELOCATABLE
 #define VIRT_PHYS_OFFSET virt_phys_offset
 #else
 #define VIRT_PHYS_OFFSET (KERNELBASE - PHYSICAL_START)
 #endif
-
+#endif
 
 #ifdef CONFIG_PPC64
 #define MEMORY_START	0UL
@@ -127,9 +129,10 @@ extern long long virt_phys_offset;
 #define pfn_valid(pfn)		((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr)
 #endif
 
-#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_to_page(kaddr)	pfn_to_page(virt_to_pfn(kaddr))
 #define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
-#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr)	pfn_valid(virt_to_pfn(kaddr))
 
 /*
  * On Book-E parts we need __va to parse the device tree and we can't
@@ -204,7 +207,7 @@ extern long long virt_phys_offset;
  * On non-Book-E PPC64 PAGE_OFFSET and MEMORY_START are constants so use
  * the other definitions for __va & __pa.
  */
-#ifdef CONFIG_BOOKE
+#if defined(CONFIG_PPC32) && defined(CONFIG_BOOKE)
 #define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + VIRT_PHYS_OFFSET))
 #define __pa(x) ((unsigned long)(x) - VIRT_PHYS_OFFSET)
 #else
@@ -240,8 +243,8 @@ extern long long virt_phys_offset;
 #endif
 
 /* align addr on a size boundary - adjust address up/down if needed */
-#define _ALIGN_UP(addr,size)	(((addr)+((size)-1))&(~((size)-1)))
-#define _ALIGN_DOWN(addr,size)	((addr)&(~((size)-1)))
+#define _ALIGN_UP(addr, size)   __ALIGN_KERNEL(addr, size)
+#define _ALIGN_DOWN(addr, size)	((addr)&(~((typeof(addr))(size)-1)))
 
 /* align addr on a size boundary - adjust address up if needed */
 #define _ALIGN(addr,size)     _ALIGN_UP(addr,size)
@@ -362,6 +365,20 @@ typedef struct { signed long pd; } hugepd_t;
 
 #ifdef CONFIG_HUGETLB_PAGE
 #ifdef CONFIG_PPC_BOOK3S_64
+#ifdef CONFIG_PPC_64K_PAGES
+/*
+ * With 64k page size, we have hugepage ptes in the pgd and pmd entries. We don't
+ * need to setup hugepage directory for them. Our pte and page directory format
+ * enable us to have this enabled. But to avoid errors when implementing new
+ * features disable hugepd for 64K. We enable a debug version here, So we catch
+ * wrong usage.
+ */
+#ifdef CONFIG_DEBUG_VM
+extern int hugepd_ok(hugepd_t hpd);
+#else
+#define hugepd_ok(x)	(0)
+#endif
+#else
 static inline int hugepd_ok(hugepd_t hpd)
 {
 	/*
@@ -370,6 +387,7 @@ static inline int hugepd_ok(hugepd_t hpd)
 	 */
 	return (((hpd.pd & 0x3) == 0x0) && ((hpd.pd & HUGEPD_SHIFT_MASK) != 0));
 }
+#endif
 #else
 static inline int hugepd_ok(hugepd_t hpd)
 {
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index fa1dfb7..3245f2d 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -437,9 +437,9 @@ static inline char *get_hpte_slot_array(pmd_t *pmdp)
 
 }
 
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
 extern void hpte_do_hugepage_flush(struct mm_struct *mm, unsigned long addr,
 				   pmd_t *pmdp, unsigned long old_pmd);
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
 extern pmd_t pfn_pmd(unsigned long pfn, pgprot_t pgprot);
 extern pmd_t mk_pmd(struct page *page, pgprot_t pgprot);
 extern pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot);
@@ -479,6 +479,14 @@ static inline int pmd_trans_splitting(pmd_t pmd)
 }
 
 extern int has_transparent_hugepage(void);
+#else
+static inline void hpte_do_hugepage_flush(struct mm_struct *mm,
+					  unsigned long addr, pmd_t *pmdp,
+					  unsigned long old_pmd)
+{
+
+	WARN(1, "%s called with THP disabled\n", __func__);
+}
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
 static inline int pmd_large(pmd_t pmd)
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index 0717693..b64b421 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -259,15 +259,15 @@ extern int gup_hugepte(pte_t *ptep, unsigned long sz, unsigned long addr,
 #define has_transparent_hugepage() 0
 #endif
 pte_t *__find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea,
-				 unsigned *shift);
+				   bool *is_thp, unsigned *shift);
 static inline pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea,
-					       unsigned *shift)
+					       bool *is_thp, unsigned *shift)
 {
 	if (!arch_irqs_disabled()) {
 		pr_info("%s called with irq enabled\n", __func__);
 		dump_stack();
 	}
-	return __find_linux_pte_or_hugepte(pgdir, ea, shift);
+	return __find_linux_pte_or_hugepte(pgdir, ea, is_thp, shift);
 }
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index 126d0c4..c9e26cb 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -370,3 +370,15 @@ COMPAT_SYS(execveat)
 PPC64ONLY(switch_endian)
 SYSCALL_SPU(userfaultfd)
 SYSCALL_SPU(membarrier)
+SYSCALL(semop)
+SYSCALL(semget)
+COMPAT_SYS(semctl)
+COMPAT_SYS(semtimedop)
+COMPAT_SYS(msgsnd)
+COMPAT_SYS(msgrcv)
+SYSCALL(msgget)
+COMPAT_SYS(msgctl)
+COMPAT_SYS(shmat)
+SYSCALL(shmdt)
+SYSCALL(shmget)
+COMPAT_SYS(shmctl)
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index 13411be..6d8f802 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -12,7 +12,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define __NR_syscalls		366
+#define __NR_syscalls		378
 
 #define __NR__exit __NR_exit
 #define NR_syscalls	__NR_syscalls
diff --git a/arch/powerpc/include/uapi/asm/unistd.h b/arch/powerpc/include/uapi/asm/unistd.h
index 6337738..81579e9 100644
--- a/arch/powerpc/include/uapi/asm/unistd.h
+++ b/arch/powerpc/include/uapi/asm/unistd.h
@@ -388,5 +388,17 @@
 #define __NR_switch_endian	363
 #define __NR_userfaultfd	364
 #define __NR_membarrier		365
+#define __NR_semop		366
+#define __NR_semget		367
+#define __NR_semctl		368
+#define __NR_semtimedop		369
+#define __NR_msgsnd		370
+#define __NR_msgrcv		371
+#define __NR_msgget		372
+#define __NR_msgctl		373
+#define __NR_shmat		374
+#define __NR_shmdt		375
+#define __NR_shmget		376
+#define __NR_shmctl		377
 
 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index 51dbace..2bb252c 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -221,8 +221,8 @@ void crash_kexec_secondary(struct pt_regs *regs)
 #endif	/* CONFIG_SMP */
 
 /* wait for all the CPUs to hit real mode but timeout if they don't come in */
-#if defined(CONFIG_SMP) && defined(CONFIG_PPC_STD_MMU_64)
-static void crash_kexec_wait_realmode(int cpu)
+#if defined(CONFIG_SMP) && defined(CONFIG_PPC64)
+static void __maybe_unused crash_kexec_wait_realmode(int cpu)
 {
 	unsigned int msecs;
 	int i;
@@ -244,7 +244,7 @@ static void crash_kexec_wait_realmode(int cpu)
 }
 #else
 static inline void crash_kexec_wait_realmode(int cpu) {}
-#endif	/* CONFIG_SMP && CONFIG_PPC_STD_MMU_64 */
+#endif	/* CONFIG_SMP && CONFIG_PPC64 */
 
 /*
  * Register a function to be called on shutdown.  Only use this if you
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index e968533..40e4d4a 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -351,7 +351,8 @@ static inline unsigned long eeh_token_to_phys(unsigned long token)
 	 * worried about _PAGE_SPLITTING/collapse. Also we will not hit
 	 * page table free, because of init_mm.
 	 */
-	ptep = __find_linux_pte_or_hugepte(init_mm.pgd, token, &hugepage_shift);
+	ptep = __find_linux_pte_or_hugepte(init_mm.pgd, token,
+					   NULL, &hugepage_shift);
 	if (!ptep)
 		return token;
 	WARN_ON(hugepage_shift);
@@ -630,7 +631,7 @@ int eeh_pci_enable(struct eeh_pe *pe, int function)
 	 */
 	switch (function) {
 	case EEH_OPT_THAW_MMIO:
-		active_flag = EEH_STATE_MMIO_ACTIVE;
+		active_flag = EEH_STATE_MMIO_ACTIVE | EEH_STATE_MMIO_ENABLED;
 		break;
 	case EEH_OPT_THAW_DMA:
 		active_flag = EEH_STATE_DMA_ACTIVE;
@@ -1411,8 +1412,7 @@ void eeh_dev_release(struct pci_dev *pdev)
 		goto out;
 
 	/* Decrease PE's pass through count */
-	atomic_dec(&edev->pe->pass_dev_cnt);
-	WARN_ON(atomic_read(&edev->pe->pass_dev_cnt) < 0);
+	WARN_ON(atomic_dec_if_positive(&edev->pe->pass_dev_cnt) < 0);
 	eeh_pe_change_owner(edev->pe);
 out:
 	mutex_unlock(&eeh_dev_mutex);
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 89eb4bc..80dfe89 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -416,7 +416,10 @@ static void *eeh_rmv_device(void *data, void *userdata)
 	driver = eeh_pcid_get(dev);
 	if (driver) {
 		eeh_pcid_put(dev);
-		if (driver->err_handler)
+		if (driver->err_handler &&
+		    driver->err_handler->error_detected &&
+		    driver->err_handler->slot_reset &&
+		    driver->err_handler->resume)
 			return NULL;
 	}
 
@@ -587,10 +590,16 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 	eeh_ops->configure_bridge(pe);
 	eeh_pe_restore_bars(pe);
 
-	/* Clear frozen state */
-	rc = eeh_clear_pe_frozen_state(pe, false);
-	if (rc)
-		return rc;
+	/*
+	 * If it's PHB PE, the frozen state on all available PEs should have
+	 * been cleared by the PHB reset. Otherwise, we unfreeze the PE and its
+	 * child PEs because they might be in frozen state.
+	 */
+	if (!(pe->type & EEH_PE_PHB)) {
+		rc = eeh_clear_pe_frozen_state(pe, false);
+		if (rc)
+			return rc;
+	}
 
 	/* Give the system 5 seconds to finish running the user-space
 	 * hotplug shutdown scripts, e.g. ifdown for ethernet.  Yes,
@@ -655,9 +664,17 @@ static void eeh_handle_normal_event(struct eeh_pe *pe)
 	 * to accomplish the reset.  Each child gets a report of the
 	 * status ... if any child can't handle the reset, then the entire
 	 * slot is dlpar removed and added.
+	 *
+	 * When the PHB is fenced, we have to issue a reset to recover from
+	 * the error. Override the result if necessary to have partially
+	 * hotplug for this case.
 	 */
 	pr_info("EEH: Notify device drivers to shutdown\n");
 	eeh_pe_dev_traverse(pe, eeh_report_error, &result);
+	if ((pe->type & EEH_PE_PHB) &&
+	    result != PCI_ERS_RESULT_NONE &&
+	    result != PCI_ERS_RESULT_NEED_RESET)
+		result = PCI_ERS_RESULT_NEED_RESET;
 
 	/* Get the current PCI slot state. This can take a long time,
 	 * sometimes over 300 seconds for certain systems.
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index f3bd5e7..488e631 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -542,8 +542,8 @@ interrupt_base_book3e:					/* fake trap */
 	EXCEPTION_STUB(0x320, ehpriv)
 	EXCEPTION_STUB(0x340, lrat_error)
 
-	.globl interrupt_end_book3e
-interrupt_end_book3e:
+	.globl __end_interrupts
+__end_interrupts:
 
 /* Critical Input Interrupt */
 	START_EXCEPTION(critical_input);
@@ -736,7 +736,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	beq+	1f
 
 	LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e)
-	LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e)
+	LOAD_REG_IMMEDIATE(r15,__end_interrupts)
 	cmpld	cr0,r10,r14
 	cmpld	cr1,r10,r15
 	blt+	cr0,1f
@@ -800,7 +800,7 @@ kernel_dbg_exc:
 	beq+	1f
 
 	LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e)
-	LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e)
+	LOAD_REG_IMMEDIATE(r15,__end_interrupts)
 	cmpld	cr0,r10,r14
 	cmpld	cr1,r10,r15
 	blt+	cr0,1f
@@ -1351,7 +1351,10 @@ skpinv:	addi	r6,r6,1				/* Increment */
  * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
  */
 	/* Now we branch the new virtual address mapped by this entry */
-	LOAD_REG_IMMEDIATE(r6,2f)
+	bl	1f		/* Find our address */
+1:	mflr	r6
+	addi	r6,r6,(2f - 1b)
+	tovirt(r6,r6)
 	lis	r7,MSR_KERNEL@h
 	ori	r7,r7,MSR_KERNEL@l
 	mtspr	SPRN_SRR0,r6
@@ -1583,9 +1586,11 @@ _GLOBAL(book3e_secondary_thread_init)
 	mflr	r28
 	b	3b
 
+	.globl init_core_book3e
 init_core_book3e:
 	/* Establish the interrupt vector base */
-	LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e)
+	tovirt(r2,r2)
+	LOAD_REG_ADDR(r3, interrupt_base_book3e)
 	mtspr	SPRN_IVPR,r3
 	sync
 	blr
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index d48125d..1b77956 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -182,6 +182,8 @@ exception_marker:
 
 #ifdef CONFIG_PPC_BOOK3E
 _GLOBAL(fsl_secondary_thread_init)
+	mfspr	r4,SPRN_BUCSR
+
 	/* Enable branch prediction */
 	lis     r3,BUCSR_INIT@h
 	ori     r3,r3,BUCSR_INIT@l
@@ -196,10 +198,24 @@ _GLOBAL(fsl_secondary_thread_init)
 	 * number.  There are two threads per core, so shift everything
 	 * but the low bit right by two bits so that the cpu numbering is
 	 * continuous.
+	 *
+	 * If the old value of BUCSR is non-zero, this thread has run
+	 * before.  Thus, we assume we are coming from kexec or a similar
+	 * scenario, and PIR is already set to the correct value.  This
+	 * is a bit of a hack, but there are limited opportunities for
+	 * getting information into the thread and the alternatives
+	 * seemed like they'd be overkill.  We can't tell just by looking
+	 * at the old PIR value which state it's in, since the same value
+	 * could be valid for one thread out of reset and for a different
+	 * thread in Linux.
 	 */
+
 	mfspr	r3, SPRN_PIR
+	cmpwi	r4,0
+	bne	1f
 	rlwimi	r3, r3, 30, 2, 30
 	mtspr	SPRN_PIR, r3
+1:
 #endif
 
 _GLOBAL(generic_secondary_thread_init)
@@ -441,12 +457,22 @@ __after_prom_start:
 	/* process relocations for the final address of the kernel */
 	lis	r25,PAGE_OFFSET@highest	/* compute virtual base of kernel */
 	sldi	r25,r25,32
+#if defined(CONFIG_PPC_BOOK3E)
+	tovirt(r26,r26)		/* on booke, we already run at PAGE_OFFSET */
+#endif
 	lwz	r7,__run_at_load-_stext(r26)
+#if defined(CONFIG_PPC_BOOK3E)
+	tophys(r26,r26)
+#endif
 	cmplwi	cr0,r7,1	/* flagged to stay where we are ? */
 	bne	1f
 	add	r25,r25,r26
 1:	mr	r3,r25
 	bl	relocate
+#if defined(CONFIG_PPC_BOOK3E)
+	/* IVPR needs to be set after relocation. */
+	bl	init_core_book3e
+#endif
 #endif
 
 /*
@@ -458,15 +484,15 @@ __after_prom_start:
  */
 	li	r3,0			/* target addr */
 #ifdef CONFIG_PPC_BOOK3E
-	tovirt(r3,r3)			/* on booke, we already run at PAGE_OFFSET */
+	tovirt(r3,r3)		/* on booke, we already run at PAGE_OFFSET */
 #endif
 	mr.	r4,r26			/* In some cases the loader may  */
+#if defined(CONFIG_PPC_BOOK3E)
+	tovirt(r4,r4)
+#endif
 	beq	9f			/* have already put us at zero */
 	li	r6,0x100		/* Start offset, the first 0x100 */
 					/* bytes were copied earlier.	 */
-#ifdef CONFIG_PPC_BOOK3E
-	tovirt(r6,r6)			/* on booke, we already run at PAGE_OFFSET */
-#endif
 
 #ifdef CONFIG_RELOCATABLE
 /*
@@ -474,12 +500,21 @@ __after_prom_start:
  * variable __run_at_load, if it is set the kernel is treated as relocatable
  * kernel, otherwise it will be moved to PHYSICAL_START
  */
+#if defined(CONFIG_PPC_BOOK3E)
+	tovirt(r26,r26)		/* on booke, we already run at PAGE_OFFSET */
+#endif
 	lwz	r7,__run_at_load-_stext(r26)
 	cmplwi	cr0,r7,1
 	bne	3f
 
+#ifdef CONFIG_PPC_BOOK3E
+	LOAD_REG_ADDR(r5, __end_interrupts)
+	LOAD_REG_ADDR(r11, _stext)
+	sub	r5,r5,r11
+#else
 	/* just copy interrupts */
 	LOAD_REG_IMMEDIATE(r5, __end_interrupts - _stext)
+#endif
 	b	5f
 3:
 #endif
diff --git a/arch/powerpc/kernel/io-workarounds.c b/arch/powerpc/kernel/io-workarounds.c
index 63d9cc4..5f8613c 100644
--- a/arch/powerpc/kernel/io-workarounds.c
+++ b/arch/powerpc/kernel/io-workarounds.c
@@ -76,7 +76,7 @@ struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR addr)
 		 * a page table free due to init_mm
 		 */
 		ptep = __find_linux_pte_or_hugepte(init_mm.pgd, vaddr,
-						 &hugepage_shift);
+						   NULL, &hugepage_shift);
 		if (ptep == NULL)
 			paddr = 0;
 		else {
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 1a74446..0fbd75d 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -30,6 +30,21 @@
 #include <asm/smp.h>
 #include <asm/hw_breakpoint.h>
 
+#ifdef CONFIG_PPC_BOOK3E
+int default_machine_kexec_prepare(struct kimage *image)
+{
+	int i;
+	/*
+	 * Since we use the kernel fault handlers and paging code to
+	 * handle the virtual mode, we must make sure no destination
+	 * overlaps kernel static data or bss.
+	 */
+	for (i = 0; i < image->nr_segments; i++)
+		if (image->segment[i].mem < __pa(_end))
+			return -ETXTBSY;
+	return 0;
+}
+#else
 int default_machine_kexec_prepare(struct kimage *image)
 {
 	int i;
@@ -95,6 +110,7 @@ int default_machine_kexec_prepare(struct kimage *image)
 
 	return 0;
 }
+#endif /* !CONFIG_PPC_BOOK3E */
 
 static void copy_segments(unsigned long ind)
 {
@@ -365,6 +381,7 @@ void default_machine_kexec(struct kimage *image)
 	/* NOTREACHED */
 }
 
+#ifndef CONFIG_PPC_BOOK3E
 /* Values we need to export to the second kernel via the device tree. */
 static unsigned long htab_base;
 static unsigned long htab_size;
@@ -411,3 +428,4 @@ static int __init export_htab_values(void)
 	return 0;
 }
 late_initcall(export_htab_values);
+#endif /* !CONFIG_PPC_BOOK3E */
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 6e4168c..db475d4 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -26,6 +26,7 @@
 #include <asm/thread_info.h>
 #include <asm/kexec.h>
 #include <asm/ptrace.h>
+#include <asm/mmu.h>
 
 	.text
 
@@ -484,6 +485,8 @@ _GLOBAL(kexec_wait)
 	mtsrr1	r11
 	rfid
 #else
+	/* Create TLB entry in book3e_secondary_core_init */
+	li	r4,0
 	ba	0x60
 #endif
 #endif
@@ -496,6 +499,51 @@ kexec_flag:
 
 
 #ifdef CONFIG_KEXEC
+#ifdef CONFIG_PPC_BOOK3E
+/*
+ * BOOK3E has no real MMU mode, so we have to setup the initial TLB
+ * for a core to identity map v:0 to p:0.  This current implementation
+ * assumes that 1G is enough for kexec.
+ */
+kexec_create_tlb:
+	/*
+	 * Invalidate all non-IPROT TLB entries to avoid any TLB conflict.
+	 * IPROT TLB entries should be >= PAGE_OFFSET and thus not conflict.
+	 */
+	PPC_TLBILX_ALL(0,R0)
+	sync
+	isync
+
+	mfspr	r10,SPRN_TLB1CFG
+	andi.	r10,r10,TLBnCFG_N_ENTRY	/* Extract # entries */
+	subi	r10,r10,1	/* Last entry: no conflict with kernel text */
+	lis	r9,MAS0_TLBSEL(1)@h
+	rlwimi	r9,r10,16,4,15		/* Setup MAS0 = TLBSEL | ESEL(r9) */
+
+/* Set up a temp identity mapping v:0 to p:0 and return to it. */
+#if defined(CONFIG_SMP) || defined(CONFIG_PPC_E500MC)
+#define M_IF_NEEDED	MAS2_M
+#else
+#define M_IF_NEEDED	0
+#endif
+	mtspr	SPRN_MAS0,r9
+
+	lis	r9,(MAS1_VALID|MAS1_IPROT)@h
+	ori	r9,r9,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l
+	mtspr	SPRN_MAS1,r9
+
+	LOAD_REG_IMMEDIATE(r9, 0x0 | M_IF_NEEDED)
+	mtspr	SPRN_MAS2,r9
+
+	LOAD_REG_IMMEDIATE(r9, 0x0 | MAS3_SR | MAS3_SW | MAS3_SX)
+	mtspr	SPRN_MAS3,r9
+	li	r9,0
+	mtspr	SPRN_MAS7,r9
+
+	tlbwe
+	isync
+	blr
+#endif
 
 /* kexec_smp_wait(void)
  *
@@ -525,6 +573,10 @@ _GLOBAL(kexec_smp_wait)
  * don't overwrite r3 here, it is live for kexec_wait above.
  */
 real_mode:	/* assume normal blr return */
+#ifdef CONFIG_PPC_BOOK3E
+	/* Create an identity mapping. */
+	b	kexec_create_tlb
+#else
 1:	li	r9,MSR_RI
 	li	r10,MSR_DR|MSR_IR
 	mflr	r11		/* return address to SRR0 */
@@ -536,7 +588,7 @@ real_mode:	/* assume normal blr return */
 	mtspr	SPRN_SRR1,r10
 	mtspr	SPRN_SRR0,r11
 	rfid
-
+#endif
 
 /*
  * kexec_sequence(newstack, start, image, control, clear_all())
@@ -579,9 +631,13 @@ _GLOBAL(kexec_sequence)
 	lhz	r25,PACAHWCPUID(r13)	/* get our phys cpu from paca */
 
 	/* disable interrupts, we are overwriting kernel data next */
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	0
+#else
 	mfmsr	r3
 	rlwinm	r3,r3,0,17,15
 	mtmsrd	r3,1
+#endif
 
 	/* copy dest pages, flush whole dest image */
 	mr	r3,r29
@@ -603,6 +659,7 @@ _GLOBAL(kexec_sequence)
 	li	r6,1
 	stw	r6,kexec_flag-1b(5)
 
+#ifndef CONFIG_PPC_BOOK3E
 	/* clear out hardware hash page table and tlb */
 #if !defined(_CALL_ELF) || _CALL_ELF != 2
 	ld	r12,0(r27)		/* deref function descriptor */
@@ -611,6 +668,7 @@ _GLOBAL(kexec_sequence)
 #endif
 	mtctr	r12
 	bctrl				/* ppc_md.hpte_clear_all(void); */
+#endif /* !CONFIG_PPC_BOOK3E */
 
 /*
  *   kexec image calling is:
diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c
index 98ba106..32e2652 100644
--- a/arch/powerpc/kernel/nvram_64.c
+++ b/arch/powerpc/kernel/nvram_64.c
@@ -1065,7 +1065,7 @@ loff_t __init nvram_create_partition(const char *name, int sig,
 	/* Create our OS partition */
 	new_part = kmalloc(sizeof(*new_part), GFP_KERNEL);
 	if (!new_part) {
-		pr_err("nvram_create_os_partition: kmalloc failed\n");
+		pr_err("%s: kmalloc failed\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -1077,8 +1077,8 @@ loff_t __init nvram_create_partition(const char *name, int sig,
 
 	rc = nvram_write_header(new_part);
 	if (rc <= 0) {
-		pr_err("nvram_create_os_partition: nvram_write_header "
-		       "failed (%d)\n", rc);
+		pr_err("%s: nvram_write_header failed (%d)\n", __func__, rc);
+		kfree(new_part);
 		return rc;
 	}
 	list_add_tail(&new_part->partition, &free_part->partition);
@@ -1090,8 +1090,8 @@ loff_t __init nvram_create_partition(const char *name, int sig,
 		free_part->header.checksum = nvram_checksum(&free_part->header);
 		rc = nvram_write_header(free_part);
 		if (rc <= 0) {
-			pr_err("nvram_create_os_partition: nvram_write_header "
-			       "failed (%d)\n", rc);
+			pr_err("%s: nvram_write_header failed (%d)\n",
+			       __func__, rc);
 			return rc;
 		}
 	} else {
@@ -1105,11 +1105,12 @@ loff_t __init nvram_create_partition(const char *name, int sig,
 	     tmp_index += NVRAM_BLOCK_LEN) {
 		rc = ppc_md.nvram_write(nv_init_vals, NVRAM_BLOCK_LEN, &tmp_index);
 		if (rc <= 0) {
-			pr_err("nvram_create_partition: nvram_write failed (%d)\n", rc);
+			pr_err("%s: nvram_write failed (%d)\n",
+			       __func__, rc);
 			return rc;
 		}
 	}
-	
+
 	return new_part->index + NVRAM_HEADER_LEN;
 }
 
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index 5a23b69..01ea0ed 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -204,14 +204,19 @@ static int __initdata paca_size;
 
 void __init allocate_pacas(void)
 {
-	int cpu, limit;
+	u64 limit;
+	int cpu;
 
+	limit = ppc64_rma_size;
+
+#ifdef CONFIG_PPC_BOOK3S_64
 	/*
 	 * We can't take SLB misses on the paca, and we want to access them
 	 * in real mode, so allocate them within the RMA and also within
 	 * the first segment.
 	 */
-	limit = min(0x10000000ULL, ppc64_rma_size);
+	limit = min(0x10000000ULL, limit);
+#endif
 
 	paca_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpu_ids);
 
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 7587b2a..0f7a60f 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -100,6 +100,7 @@ void pcibios_free_controller(struct pci_controller *phb)
 	if (phb->is_dynamic)
 		kfree(phb);
 }
+EXPORT_SYMBOL_GPL(pcibios_free_controller);
 
 /*
  * The function is used to return the minimal alignment
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index bef76c5..7030b03 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -783,17 +783,19 @@ void __init early_get_first_memblock_info(void *params, phys_addr_t *size)
 int of_get_ibm_chip_id(struct device_node *np)
 {
 	of_node_get(np);
-	while(np) {
-		struct device_node *old = np;
-		const __be32 *prop;
+	while (np) {
+		u32 chip_id;
 
-		prop = of_get_property(np, "ibm,chip-id", NULL);
-		if (prop) {
+		/*
+		 * Skiboot may produce memory nodes that contain more than one
+		 * cell in chip-id, we only read the first one here.
+		 */
+		if (!of_property_read_u32(np, "ibm,chip-id", &chip_id)) {
 			of_node_put(np);
-			return be32_to_cpup(prop);
+			return chip_id;
 		}
-		np = of_get_parent(np);
-		of_node_put(old);
+
+		np = of_get_next_parent(np);
 	}
 	return -1;
 }
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index bdcbb71..5c03a6a 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -108,6 +108,14 @@ static void setup_tlb_core_data(void)
 	for_each_possible_cpu(cpu) {
 		int first = cpu_first_thread_sibling(cpu);
 
+		/*
+		 * If we boot via kdump on a non-primary thread,
+		 * make sure we point at the thread that actually
+		 * set up this TLB.
+		 */
+		if (cpu_first_thread_sibling(boot_cpuid) == first)
+			first = boot_cpuid;
+
 		paca[cpu].tcd_ptr = &paca[first].tcd;
 
 		/*
@@ -332,11 +340,26 @@ void early_setup_secondary(void)
 #endif /* CONFIG_SMP */
 
 #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
+static bool use_spinloop(void)
+{
+	if (!IS_ENABLED(CONFIG_PPC_BOOK3E))
+		return true;
+
+	/*
+	 * When book3e boots from kexec, the ePAPR spin table does
+	 * not get used.
+	 */
+	return of_property_read_bool(of_chosen, "linux,booted-from-kexec");
+}
+
 void smp_release_cpus(void)
 {
 	unsigned long *ptr;
 	int i;
 
+	if (!use_spinloop())
+		return;
+
 	DBG(" -> smp_release_cpus()\n");
 
 	/* All secondary cpus are spinning on a common spinloop, release them
@@ -516,7 +539,7 @@ void __init setup_system(void)
 	 * Freescale Book3e parts spin in a loop provided by firmware,
 	 * so smp_release_cpus() does nothing for them
 	 */
-#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_FSL_BOOK3E)
+#if defined(CONFIG_SMP)
 	/* Release secondary cpus out of their spinloops at 0x60 now that
 	 * we can map physical -> logical CPU ids
 	 */
diff --git a/arch/powerpc/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile
index 53e6c9b..6abffb7 100644
--- a/arch/powerpc/kernel/vdso32/Makefile
+++ b/arch/powerpc/kernel/vdso32/Makefile
@@ -18,7 +18,7 @@ GCOV_PROFILE := n
 
 ccflags-y := -shared -fno-common -fno-builtin
 ccflags-y += -nostdlib -Wl,-soname=linux-vdso32.so.1 \
-		$(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
+		$(call cc-ldoption, -Wl$(comma)--hash-style=both)
 asflags-y := -D__VDSO32__ -s
 
 obj-y += vdso32_wrapper.o
diff --git a/arch/powerpc/kernel/vdso32/datapage.S b/arch/powerpc/kernel/vdso32/datapage.S
index dc21e89..59cf5f4 100644
--- a/arch/powerpc/kernel/vdso32/datapage.S
+++ b/arch/powerpc/kernel/vdso32/datapage.S
@@ -16,6 +16,10 @@
 #include <asm/vdso.h>
 
 	.text
+	.global	__kernel_datapage_offset;
+__kernel_datapage_offset:
+	.long	0
+
 V_FUNCTION_BEGIN(__get_datapage)
   .cfi_startproc
 	/* We don't want that exposed or overridable as we want other objects
@@ -27,13 +31,11 @@ V_FUNCTION_BEGIN(__get_datapage)
 	mflr	r0
   .cfi_register lr,r0
 
-	bcl	20,31,1f
-	.global	__kernel_datapage_offset;
-__kernel_datapage_offset:
-	.long	0
-1:
+	bcl	20,31,data_page_branch
+data_page_branch:
 	mflr	r3
 	mtlr	r0
+	addi	r3, r3, __kernel_datapage_offset-data_page_branch
 	lwz	r0,0(r3)
 	add	r3,r0,r3
 	blr
diff --git a/arch/powerpc/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile
index effca94..8c8f2ae 100644
--- a/arch/powerpc/kernel/vdso64/Makefile
+++ b/arch/powerpc/kernel/vdso64/Makefile
@@ -11,7 +11,7 @@ GCOV_PROFILE := n
 
 ccflags-y := -shared -fno-common -fno-builtin
 ccflags-y += -nostdlib -Wl,-soname=linux-vdso64.so.1 \
-		$(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
+		$(call cc-ldoption, -Wl$(comma)--hash-style=both)
 asflags-y := -D__VDSO64__ -s
 
 obj-y += vdso64_wrapper.o
diff --git a/arch/powerpc/kernel/vdso64/datapage.S b/arch/powerpc/kernel/vdso64/datapage.S
index 79796de..2f01c4a 100644
--- a/arch/powerpc/kernel/vdso64/datapage.S
+++ b/arch/powerpc/kernel/vdso64/datapage.S
@@ -16,6 +16,10 @@
 #include <asm/vdso.h>
 
 	.text
+.global	__kernel_datapage_offset;
+__kernel_datapage_offset:
+	.long	0
+
 V_FUNCTION_BEGIN(__get_datapage)
   .cfi_startproc
 	/* We don't want that exposed or overridable as we want other objects
@@ -27,13 +31,11 @@ V_FUNCTION_BEGIN(__get_datapage)
 	mflr	r0
   .cfi_register lr,r0
 
-	bcl	20,31,1f
-	.global	__kernel_datapage_offset;
-__kernel_datapage_offset:
-	.long	0
-1:
+	bcl	20,31,data_page_branch
+data_page_branch:
 	mflr	r3
 	mtlr	r0
+	addi	r3, r3, __kernel_datapage_offset-data_page_branch
 	lwz	r0,0(r3)
 	add	r3,r0,r3
 	blr
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 1db6851..d41fd0a 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -183,6 +183,12 @@ SECTIONS
 		*(.rela*)
 	}
 #endif
+	/* .exit.data is discarded at runtime, not link time,
+	 * to deal with references from .exit.text
+	 */
+	.exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
+		EXIT_DATA
+	}
 
 	/* freed after init ends here */
 	. = ALIGN(PAGE_SIZE);
diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c
index 10722b1..fb37290 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
@@ -544,7 +544,7 @@ int kvmppc_book3s_hv_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 			 */
 			local_irq_save(flags);
 			ptep = find_linux_pte_or_hugepte(current->mm->pgd,
-							 hva, NULL);
+							 hva, NULL, NULL);
 			if (ptep) {
 				pte = kvmppc_read_update_linux_pte(ptep, 1);
 				if (pte_write(pte))
diff --git a/arch/powerpc/kvm/book3s_hv_rm_mmu.c b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
index 97e7f8c..9170051 100644
--- a/arch/powerpc/kvm/book3s_hv_rm_mmu.c
+++ b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
@@ -32,7 +32,7 @@ static void *real_vmalloc_addr(void *x)
 	 * So don't worry about THP collapse/split. Called
 	 * Only in realmode, hence won't need irq_save/restore.
 	 */
-	p = __find_linux_pte_or_hugepte(swapper_pg_dir, addr, NULL);
+	p = __find_linux_pte_or_hugepte(swapper_pg_dir, addr, NULL, NULL);
 	if (!p || !pte_present(*p))
 		return NULL;
 	addr = (pte_pfn(*p) << PAGE_SHIFT) | (addr & ~PAGE_MASK);
@@ -221,10 +221,12 @@ long kvmppc_do_h_enter(struct kvm *kvm, unsigned long flags,
 	 * retry via mmu_notifier_retry.
 	 */
 	if (realmode)
-		ptep = __find_linux_pte_or_hugepte(pgdir, hva, &hpage_shift);
+		ptep = __find_linux_pte_or_hugepte(pgdir, hva, NULL,
+						   &hpage_shift);
 	else {
 		local_irq_save(irq_flags);
-		ptep = find_linux_pte_or_hugepte(pgdir, hva, &hpage_shift);
+		ptep = find_linux_pte_or_hugepte(pgdir, hva, NULL,
+						 &hpage_shift);
 	}
 	if (ptep) {
 		pte_t pte;
diff --git a/arch/powerpc/kvm/e500_mmu_host.c b/arch/powerpc/kvm/e500_mmu_host.c
index 5e2102c..34c43ff 100644
--- a/arch/powerpc/kvm/e500_mmu_host.c
+++ b/arch/powerpc/kvm/e500_mmu_host.c
@@ -476,7 +476,7 @@ static inline int kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500,
 	 * can't run hence pfn won't change.
 	 */
 	local_irq_save(flags);
-	ptep = find_linux_pte_or_hugepte(pgdir, hva, NULL);
+	ptep = find_linux_pte_or_hugepte(pgdir, hva, NULL, NULL);
 	if (ptep) {
 		pte_t pte = READ_ONCE(*ptep);
 
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index 354ba3c..f3afe3d 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -141,8 +141,6 @@ static void settlbcam(int index, unsigned long virt, phys_addr_t phys,
 	tlbcam_addrs[index].start = virt;
 	tlbcam_addrs[index].limit = virt + size - 1;
 	tlbcam_addrs[index].phys = phys;
-
-	loadcam_entry(index);
 }
 
 unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
@@ -171,7 +169,8 @@ unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
 }
 
 static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt,
-					unsigned long ram, int max_cam_idx)
+					unsigned long ram, int max_cam_idx,
+					bool dryrun)
 {
 	int i;
 	unsigned long amount_mapped = 0;
@@ -181,13 +180,20 @@ static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt,
 		unsigned long cam_sz;
 
 		cam_sz = calc_cam_sz(ram, virt, phys);
-		settlbcam(i, virt, phys, cam_sz, pgprot_val(PAGE_KERNEL_X), 0);
+		if (!dryrun)
+			settlbcam(i, virt, phys, cam_sz,
+				  pgprot_val(PAGE_KERNEL_X), 0);
 
 		ram -= cam_sz;
 		amount_mapped += cam_sz;
 		virt += cam_sz;
 		phys += cam_sz;
 	}
+
+	if (dryrun)
+		return amount_mapped;
+
+	loadcam_multi(0, i, max_cam_idx);
 	tlbcam_index = i;
 
 #ifdef CONFIG_PPC64
@@ -199,12 +205,12 @@ static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt,
 	return amount_mapped;
 }
 
-unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
+unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx, bool dryrun)
 {
 	unsigned long virt = PAGE_OFFSET;
 	phys_addr_t phys = memstart_addr;
 
-	return map_mem_in_cams_addr(phys, virt, ram, max_cam_idx);
+	return map_mem_in_cams_addr(phys, virt, ram, max_cam_idx, dryrun);
 }
 
 #ifdef CONFIG_PPC32
@@ -235,7 +241,7 @@ void __init adjust_total_lowmem(void)
 	ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem);
 
 	i = switch_to_as1();
-	__max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM);
+	__max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM, false);
 	restore_to_as0(i, 0, 0, 1);
 
 	pr_info("Memory CAM mapping: ");
@@ -303,10 +309,12 @@ notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start)
 		n = switch_to_as1();
 		/* map a 64M area for the second relocation */
 		if (memstart_addr > start)
-			map_mem_in_cams(0x4000000, CONFIG_LOWMEM_CAM_NUM);
+			map_mem_in_cams(0x4000000, CONFIG_LOWMEM_CAM_NUM,
+					false);
 		else
 			map_mem_in_cams_addr(start, PAGE_OFFSET + offset,
-					0x4000000, CONFIG_LOWMEM_CAM_NUM);
+					0x4000000, CONFIG_LOWMEM_CAM_NUM,
+					false);
 		restore_to_as0(n, offset, __va(dt_ptr), 1);
 		/* We should never reach here */
 		panic("Relocation error");
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index aee7017..7f9616f 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -994,6 +994,7 @@ int hash_page_mm(struct mm_struct *mm, unsigned long ea,
 		 unsigned long access, unsigned long trap,
 		 unsigned long flags)
 {
+	bool is_thp;
 	enum ctx_state prev_state = exception_enter();
 	pgd_t *pgdir;
 	unsigned long vsid;
@@ -1068,7 +1069,7 @@ int hash_page_mm(struct mm_struct *mm, unsigned long ea,
 #endif /* CONFIG_PPC_64K_PAGES */
 
 	/* Get PTE and page size from page tables */
-	ptep = __find_linux_pte_or_hugepte(pgdir, ea, &hugeshift);
+	ptep = __find_linux_pte_or_hugepte(pgdir, ea, &is_thp, &hugeshift);
 	if (ptep == NULL || !pte_present(*ptep)) {
 		DBG_LOW(" no PTE !\n");
 		rc = 1;
@@ -1088,7 +1089,7 @@ int hash_page_mm(struct mm_struct *mm, unsigned long ea,
 	}
 
 	if (hugeshift) {
-		if (pmd_trans_huge(*(pmd_t *)ptep))
+		if (is_thp)
 			rc = __hash_page_thp(ea, access, vsid, (pmd_t *)ptep,
 					     trap, flags, ssize, psize);
 #ifdef CONFIG_HUGETLB_PAGE
@@ -1243,7 +1244,7 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
 	 * THP pages use update_mmu_cache_pmd. We don't do
 	 * hash preload there. Hence can ignore THP here
 	 */
-	ptep = find_linux_pte_or_hugepte(pgdir, ea, &hugepage_shift);
+	ptep = find_linux_pte_or_hugepte(pgdir, ea, NULL, &hugepage_shift);
 	if (!ptep)
 		goto out_exit;
 
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 06c1452..9833fee 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -89,6 +89,25 @@ int pgd_huge(pgd_t pgd)
 	 */
 	return ((pgd_val(pgd) & 0x3) != 0x0);
 }
+
+#if defined(CONFIG_PPC_64K_PAGES) && defined(CONFIG_DEBUG_VM)
+/*
+ * This enables us to catch the wrong page directory format
+ * Moved here so that we can use WARN() in the call.
+ */
+int hugepd_ok(hugepd_t hpd)
+{
+	bool is_hugepd;
+
+	/*
+	 * We should not find this format in page directory, warn otherwise.
+	 */
+	is_hugepd = (((hpd.pd & 0x3) == 0x0) && ((hpd.pd & HUGEPD_SHIFT_MASK) != 0));
+	WARN(is_hugepd, "Found wrong page directory format\n");
+	return 0;
+}
+#endif
+
 #else
 int pmd_huge(pmd_t pmd)
 {
@@ -109,7 +128,7 @@ int pgd_huge(pgd_t pgd)
 pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 {
 	/* Only called for hugetlbfs pages, hence can ignore THP */
-	return __find_linux_pte_or_hugepte(mm->pgd, addr, NULL);
+	return __find_linux_pte_or_hugepte(mm->pgd, addr, NULL, NULL);
 }
 
 static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
@@ -684,13 +703,14 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 struct page *
 follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)
 {
+	bool is_thp;
 	pte_t *ptep, pte;
 	unsigned shift;
 	unsigned long mask, flags;
 	struct page *page = ERR_PTR(-EINVAL);
 
 	local_irq_save(flags);
-	ptep = find_linux_pte_or_hugepte(mm->pgd, address, &shift);
+	ptep = find_linux_pte_or_hugepte(mm->pgd, address, &is_thp, &shift);
 	if (!ptep)
 		goto no_page;
 	pte = READ_ONCE(*ptep);
@@ -699,7 +719,7 @@ follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)
 	 * Transparent hugepages are handled by generic code. We can skip them
 	 * here.
 	 */
-	if (!shift || pmd_trans_huge(__pmd(pte_val(pte))))
+	if (!shift || is_thp)
 		goto no_page;
 
 	if (!pte_present(pte)) {
@@ -956,7 +976,7 @@ void flush_dcache_icache_hugepage(struct page *page)
  */
 
 pte_t *__find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea,
-				   unsigned *shift)
+				   bool *is_thp, unsigned *shift)
 {
 	pgd_t pgd, *pgdp;
 	pud_t pud, *pudp;
@@ -968,6 +988,9 @@ pte_t *__find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea,
 	if (shift)
 		*shift = 0;
 
+	if (is_thp)
+		*is_thp = false;
+
 	pgdp = pgdir + pgd_index(ea);
 	pgd  = READ_ONCE(*pgdp);
 	/*
@@ -1015,7 +1038,14 @@ pte_t *__find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea,
 			if (pmd_none(pmd))
 				return NULL;
 
-			if (pmd_huge(pmd) || pmd_large(pmd)) {
+			if (pmd_trans_huge(pmd)) {
+				if (is_thp)
+					*is_thp = true;
+				ret_pte = (pte_t *) pmdp;
+				goto out;
+			}
+
+			if (pmd_huge(pmd)) {
 				ret_pte = (pte_t *) pmdp;
 				goto out;
 			} else if (is_hugepd(__hugepd(pmd_val(pmd))))
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 085b66b..9f58ff4 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -141,7 +141,8 @@ extern void MMU_init_hw(void);
 extern unsigned long mmu_mapin_ram(unsigned long top);
 
 #elif defined(CONFIG_PPC_FSL_BOOK3E)
-extern unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx);
+extern unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx,
+				     bool dryrun);
 extern unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
 				 phys_addr_t phys);
 #ifdef CONFIG_PPC32
@@ -152,6 +153,7 @@ extern int switch_to_as1(void);
 extern void restore_to_as0(int esel, int offset, void *dt_ptr, int bootcpu);
 #endif
 extern void loadcam_entry(unsigned int index);
+extern void loadcam_multi(int first_idx, int num, int tmp_idx);
 
 struct tlbcam {
 	u32	MAS0;
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 8d8a541..669a15e 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -276,7 +276,6 @@ static int of_node_to_nid_single(struct device_node *device)
 /* Walk the device tree upwards, looking for an associativity id */
 int of_node_to_nid(struct device_node *device)
 {
-	struct device_node *tmp;
 	int nid = -1;
 
 	of_node_get(device);
@@ -285,9 +284,7 @@ int of_node_to_nid(struct device_node *device)
 		if (nid != -1)
 			break;
 
-	        tmp = device;
-		device = of_get_parent(tmp);
-		of_node_put(tmp);
+		device = of_get_next_parent(device);
 	}
 	of_node_put(device);
 
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 8a32a2b..515730e 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -25,6 +25,11 @@
 #include <asm/udbg.h>
 #include <asm/code-patching.h>
 
+enum slb_index {
+	LINEAR_INDEX	= 0, /* Kernel linear map  (0xc000000000000000) */
+	VMALLOC_INDEX	= 1, /* Kernel virtual map (0xd000000000000000) */
+	KSTACK_INDEX	= 2, /* Kernel stack map */
+};
 
 extern void slb_allocate_realmode(unsigned long ea);
 extern void slb_allocate_user(unsigned long ea);
@@ -41,9 +46,9 @@ static void slb_allocate(unsigned long ea)
 	(((ssize) == MMU_SEGSIZE_256M)? ESID_MASK: ESID_MASK_1T)
 
 static inline unsigned long mk_esid_data(unsigned long ea, int ssize,
-					 unsigned long entry)
+					 enum slb_index index)
 {
-	return (ea & slb_esid_mask(ssize)) | SLB_ESID_V | entry;
+	return (ea & slb_esid_mask(ssize)) | SLB_ESID_V | index;
 }
 
 static inline unsigned long mk_vsid_data(unsigned long ea, int ssize,
@@ -55,39 +60,39 @@ static inline unsigned long mk_vsid_data(unsigned long ea, int ssize,
 
 static inline void slb_shadow_update(unsigned long ea, int ssize,
 				     unsigned long flags,
-				     unsigned long entry)
+				     enum slb_index index)
 {
+	struct slb_shadow *p = get_slb_shadow();
+
 	/*
 	 * Clear the ESID first so the entry is not valid while we are
 	 * updating it.  No write barriers are needed here, provided
 	 * we only update the current CPU's SLB shadow buffer.
 	 */
-	get_slb_shadow()->save_area[entry].esid = 0;
-	get_slb_shadow()->save_area[entry].vsid =
-				cpu_to_be64(mk_vsid_data(ea, ssize, flags));
-	get_slb_shadow()->save_area[entry].esid =
-				cpu_to_be64(mk_esid_data(ea, ssize, entry));
+	p->save_area[index].esid = 0;
+	p->save_area[index].vsid = cpu_to_be64(mk_vsid_data(ea, ssize, flags));
+	p->save_area[index].esid = cpu_to_be64(mk_esid_data(ea, ssize, index));
 }
 
-static inline void slb_shadow_clear(unsigned long entry)
+static inline void slb_shadow_clear(enum slb_index index)
 {
-	get_slb_shadow()->save_area[entry].esid = 0;
+	get_slb_shadow()->save_area[index].esid = 0;
 }
 
 static inline void create_shadowed_slbe(unsigned long ea, int ssize,
 					unsigned long flags,
-					unsigned long entry)
+					enum slb_index index)
 {
 	/*
 	 * Updating the shadow buffer before writing the SLB ensures
 	 * we don't get a stale entry here if we get preempted by PHYP
 	 * between these two statements.
 	 */
-	slb_shadow_update(ea, ssize, flags, entry);
+	slb_shadow_update(ea, ssize, flags, index);
 
 	asm volatile("slbmte  %0,%1" :
 		     : "r" (mk_vsid_data(ea, ssize, flags)),
-		       "r" (mk_esid_data(ea, ssize, entry))
+		       "r" (mk_esid_data(ea, ssize, index))
 		     : "memory" );
 }
 
@@ -103,16 +108,16 @@ static void __slb_flush_and_rebolt(void)
 	lflags = SLB_VSID_KERNEL | linear_llp;
 	vflags = SLB_VSID_KERNEL | vmalloc_llp;
 
-	ksp_esid_data = mk_esid_data(get_paca()->kstack, mmu_kernel_ssize, 2);
+	ksp_esid_data = mk_esid_data(get_paca()->kstack, mmu_kernel_ssize, KSTACK_INDEX);
 	if ((ksp_esid_data & ~0xfffffffUL) <= PAGE_OFFSET) {
 		ksp_esid_data &= ~SLB_ESID_V;
 		ksp_vsid_data = 0;
-		slb_shadow_clear(2);
+		slb_shadow_clear(KSTACK_INDEX);
 	} else {
 		/* Update stack entry; others don't change */
-		slb_shadow_update(get_paca()->kstack, mmu_kernel_ssize, lflags, 2);
+		slb_shadow_update(get_paca()->kstack, mmu_kernel_ssize, lflags, KSTACK_INDEX);
 		ksp_vsid_data =
-			be64_to_cpu(get_slb_shadow()->save_area[2].vsid);
+			be64_to_cpu(get_slb_shadow()->save_area[KSTACK_INDEX].vsid);
 	}
 
 	/* We need to do this all in asm, so we're sure we don't touch
@@ -151,7 +156,7 @@ void slb_vmalloc_update(void)
 	unsigned long vflags;
 
 	vflags = SLB_VSID_KERNEL | mmu_psize_defs[mmu_vmalloc_psize].sllp;
-	slb_shadow_update(VMALLOC_START, mmu_kernel_ssize, vflags, 1);
+	slb_shadow_update(VMALLOC_START, mmu_kernel_ssize, vflags, VMALLOC_INDEX);
 	slb_flush_and_rebolt();
 }
 
@@ -326,19 +331,19 @@ void slb_initialize(void)
 	asm volatile("isync":::"memory");
 	asm volatile("slbmte  %0,%0"::"r" (0) : "memory");
 	asm volatile("isync; slbia; isync":::"memory");
-	create_shadowed_slbe(PAGE_OFFSET, mmu_kernel_ssize, lflags, 0);
-	create_shadowed_slbe(VMALLOC_START, mmu_kernel_ssize, vflags, 1);
+	create_shadowed_slbe(PAGE_OFFSET, mmu_kernel_ssize, lflags, LINEAR_INDEX);
+	create_shadowed_slbe(VMALLOC_START, mmu_kernel_ssize, vflags, VMALLOC_INDEX);
 
 	/* For the boot cpu, we're running on the stack in init_thread_union,
 	 * which is in the first segment of the linear mapping, and also
 	 * get_paca()->kstack hasn't been initialized yet.
 	 * For secondary cpus, we need to bolt the kernel stack entry now.
 	 */
-	slb_shadow_clear(2);
+	slb_shadow_clear(KSTACK_INDEX);
 	if (raw_smp_processor_id() != boot_cpuid &&
 	    (get_paca()->kstack & slb_esid_mask(mmu_kernel_ssize)) > PAGE_OFFSET)
 		create_shadowed_slbe(get_paca()->kstack,
-				     mmu_kernel_ssize, lflags, 2);
+				     mmu_kernel_ssize, lflags, KSTACK_INDEX);
 
 	asm volatile("isync":::"memory");
 }
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index c522969..f7b8039 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -190,6 +190,7 @@ void tlb_flush(struct mmu_gather *tlb)
 void __flush_hash_table_range(struct mm_struct *mm, unsigned long start,
 			      unsigned long end)
 {
+	bool is_thp;
 	int hugepage_shift;
 	unsigned long flags;
 
@@ -208,21 +209,21 @@ void __flush_hash_table_range(struct mm_struct *mm, unsigned long start,
 	local_irq_save(flags);
 	arch_enter_lazy_mmu_mode();
 	for (; start < end; start += PAGE_SIZE) {
-		pte_t *ptep = find_linux_pte_or_hugepte(mm->pgd, start,
+		pte_t *ptep = find_linux_pte_or_hugepte(mm->pgd, start, &is_thp,
 							&hugepage_shift);
 		unsigned long pte;
 
 		if (ptep == NULL)
 			continue;
 		pte = pte_val(*ptep);
-		if (hugepage_shift)
+		if (is_thp)
 			trace_hugepage_invalidate(start, pte);
 		if (!(pte & _PAGE_HASHPTE))
 			continue;
-		if (unlikely(hugepage_shift && pmd_trans_huge(*(pmd_t *)pte)))
+		if (unlikely(is_thp))
 			hpte_do_hugepage_flush(mm, start, (pmd_t *)ptep, pte);
 		else
-			hpte_need_flush(mm, start, ptep, pte, 0);
+			hpte_need_flush(mm, start, ptep, pte, hugepage_shift);
 	}
 	arch_leave_lazy_mmu_mode();
 	local_irq_restore(flags);
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index e418558..29d6987 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -68,11 +68,17 @@ END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
 	ld	r14,PACAPGD(r13)
 	std	r15,EX_TLB_R15(r12)
 	std	r10,EX_TLB_CR(r12)
+#ifdef CONFIG_PPC_FSL_BOOK3E
+	std	r7,EX_TLB_R7(r12)
+#endif
 	TLB_MISS_PROLOG_STATS
 .endm
 
 .macro tlb_epilog_bolted
 	ld	r14,EX_TLB_CR(r12)
+#ifdef CONFIG_PPC_FSL_BOOK3E
+	ld	r7,EX_TLB_R7(r12)
+#endif
 	ld	r10,EX_TLB_R10(r12)
 	ld	r11,EX_TLB_R11(r12)
 	ld	r13,EX_TLB_R13(r12)
@@ -297,6 +303,7 @@ itlb_miss_fault_bolted:
  * r13 = PACA
  * r11 = tlb_per_core ptr
  * r10 = crap (free to use)
+ * r7  = esel_next
  */
 tlb_miss_common_e6500:
 	crmove	cr2*4+2,cr0*4+2		/* cr2.eq != 0 if kernel address */
@@ -325,7 +332,11 @@ BEGIN_FTR_SECTION		/* CPU_FTR_SMT */
 	bne	10b
 	b	1b
 	.previous
+END_FTR_SECTION_IFSET(CPU_FTR_SMT)
+
+	lbz	r7,TCD_ESEL_NEXT(r11)
 
+BEGIN_FTR_SECTION		/* CPU_FTR_SMT */
 	/*
 	 * Erratum A-008139 says that we can't use tlbwe to change
 	 * an indirect entry in any way (including replacing or
@@ -334,8 +345,7 @@ BEGIN_FTR_SECTION		/* CPU_FTR_SMT */
 	 * with tlbilx before overwriting.
 	 */
 
-	lbz	r15,TCD_ESEL_NEXT(r11)
-	rlwinm	r10,r15,16,0xff0000
+	rlwinm	r10,r7,16,0xff0000
 	oris	r10,r10,MAS0_TLBSEL(1)@h
 	mtspr	SPRN_MAS0,r10
 	isync
@@ -429,15 +439,14 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_SMT)
 	mtspr	SPRN_MAS2,r15
 
 tlb_miss_huge_done_e6500:
-	lbz	r15,TCD_ESEL_NEXT(r11)
 	lbz	r16,TCD_ESEL_MAX(r11)
 	lbz	r14,TCD_ESEL_FIRST(r11)
-	rlwimi	r10,r15,16,0x00ff0000	/* insert esel_next into MAS0 */
-	addi	r15,r15,1		/* increment esel_next */
+	rlwimi	r10,r7,16,0x00ff0000	/* insert esel_next into MAS0 */
+	addi	r7,r7,1			/* increment esel_next */
 	mtspr	SPRN_MAS0,r10
-	cmpw	r15,r16
-	iseleq	r15,r14,r15		/* if next == last use first */
-	stb	r15,TCD_ESEL_NEXT(r11)
+	cmpw	r7,r16
+	iseleq	r7,r14,r7		/* if next == last use first */
+	stb	r7,TCD_ESEL_NEXT(r11)
 
 	tlbwe
 
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 723a099..bb04e4d 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -42,6 +42,7 @@
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
 #include <asm/code-patching.h>
+#include <asm/cputhreads.h>
 #include <asm/hugetlb.h>
 #include <asm/paca.h>
 
@@ -628,10 +629,26 @@ static void early_init_this_mmu(void)
 #ifdef CONFIG_PPC_FSL_BOOK3E
 	if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
 		unsigned int num_cams;
+		int __maybe_unused cpu = smp_processor_id();
+		bool map = true;
 
 		/* use a quarter of the TLBCAM for bolted linear map */
 		num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4;
-		linear_map_top = map_mem_in_cams(linear_map_top, num_cams);
+
+		/*
+		 * Only do the mapping once per core, or else the
+		 * transient mapping would cause problems.
+		 */
+#ifdef CONFIG_SMP
+		if (cpu != boot_cpuid &&
+		    (cpu != cpu_first_thread_sibling(cpu) ||
+		     cpu == cpu_first_thread_sibling(boot_cpuid)))
+			map = false;
+#endif
+
+		if (map)
+			linear_map_top = map_mem_in_cams(linear_map_top,
+							 num_cams, false);
 	}
 #endif
 
@@ -729,10 +746,14 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
 	 * entries are supported though that may eventually
 	 * change.
 	 *
-	 * on FSL Embedded 64-bit, we adjust the RMA size to match the
-	 * first bolted TLB entry size.  We still limit max to 1G even if
-	 * the TLB could cover more.  This is due to what the early init
-	 * code is setup to do.
+	 * on FSL Embedded 64-bit, usually all RAM is bolted, but with
+	 * unusual memory sizes it's possible for some RAM to not be mapped
+	 * (such RAM is not used at all by Linux, since we don't support
+	 * highmem on 64-bit).  We limit ppc64_rma_size to what would be
+	 * mappable if this memblock is the only one.  Additional memblocks
+	 * can only increase, not decrease, the amount that ends up getting
+	 * mapped.  We still limit max to 1G even if we'll eventually map
+	 * more.  This is due to what the early init code is set up to do.
 	 *
 	 * We crop it to the size of the first MEMBLOCK to
 	 * avoid going over total available memory just in case...
@@ -740,8 +761,14 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
 #ifdef CONFIG_PPC_FSL_BOOK3E
 	if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
 		unsigned long linear_sz;
-		linear_sz = calc_cam_sz(first_memblock_size, PAGE_OFFSET,
-					first_memblock_base);
+		unsigned int num_cams;
+
+		/* use a quarter of the TLBCAM for bolted linear map */
+		num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4;
+
+		linear_sz = map_mem_in_cams(first_memblock_size, num_cams,
+					    true);
+
 		ppc64_rma_size = min_t(u64, linear_sz, 0x40000000);
 	} else
 #endif
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index 43ff3c7..68c4775 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -400,6 +400,7 @@ _GLOBAL(set_context)
  * extern void loadcam_entry(unsigned int index)
  *
  * Load TLBCAM[index] entry in to the L2 CAM MMU
+ * Must preserve r7, r8, r9, and r10
  */
 _GLOBAL(loadcam_entry)
 	mflr	r5
@@ -423,4 +424,66 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
 	tlbwe
 	isync
 	blr
+
+/*
+ * Load multiple TLB entries at once, using an alternate-space
+ * trampoline so that we don't have to care about whether the same
+ * TLB entry maps us before and after.
+ *
+ * r3 = first entry to write
+ * r4 = number of entries to write
+ * r5 = temporary tlb entry
+ */
+_GLOBAL(loadcam_multi)
+	mflr	r8
+
+	/*
+	 * Set up temporary TLB entry that is the same as what we're
+	 * running from, but in AS=1.
+	 */
+	bl	1f
+1:	mflr	r6
+	tlbsx	0,r8
+	mfspr	r6,SPRN_MAS1
+	ori	r6,r6,MAS1_TS
+	mtspr	SPRN_MAS1,r6
+	mfspr	r6,SPRN_MAS0
+	rlwimi	r6,r5,MAS0_ESEL_SHIFT,MAS0_ESEL_MASK
+	mr	r7,r5
+	mtspr	SPRN_MAS0,r6
+	isync
+	tlbwe
+	isync
+
+	/* Switch to AS=1 */
+	mfmsr	r6
+	ori	r6,r6,MSR_IS|MSR_DS
+	mtmsr	r6
+	isync
+
+	mr	r9,r3
+	add	r10,r3,r4
+2:	bl	loadcam_entry
+	addi	r9,r9,1
+	cmpw	r9,r10
+	mr	r3,r9
+	blt	2b
+
+	/* Return to AS=0 and clear the temporary entry */
+	mfmsr	r6
+	rlwinm.	r6,r6,0,~(MSR_IS|MSR_DS)
+	mtmsr	r6
+	isync
+
+	li	r6,0
+	mtspr	SPRN_MAS1,r6
+	rlwinm	r6,r7,MAS0_ESEL_SHIFT,MAS0_ESEL_MASK
+	oris	r6,r6,MAS0_TLBSEL(1)@h
+	mtspr	SPRN_MAS0,r6
+	isync
+	tlbwe
+	isync
+
+	mtlr	r8
+	blr
 #endif
diff --git a/arch/powerpc/perf/callchain.c b/arch/powerpc/perf/callchain.c
index ff09cde..e04a675 100644
--- a/arch/powerpc/perf/callchain.c
+++ b/arch/powerpc/perf/callchain.c
@@ -127,7 +127,7 @@ static int read_user_stack_slow(void __user *ptr, void *buf, int nb)
 		return -EFAULT;
 
 	local_irq_save(flags);
-	ptep = find_linux_pte_or_hugepte(pgdir, addr, &shift);
+	ptep = find_linux_pte_or_hugepte(pgdir, addr, NULL, &shift);
 	if (!ptep)
 		goto err_out;
 	if (!shift)
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index 48bf38d..f09016f 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -10,6 +10,12 @@ config PPC_MPC512x
 	select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
 	select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
 
+config MPC512x_LPBFIFO
+	tristate "MPC512x LocalPlus Bus FIFO driver"
+	depends on PPC_MPC512x && MPC512X_DMA
+	help
+	  Enable support for Freescale MPC512x LocalPlus Bus FIFO (SCLPC).
+
 config MPC5121_ADS
 	bool "Freescale MPC5121E ADS"
 	depends on PPC_MPC512x
diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile
index 0169312..f47d422 100644
--- a/arch/powerpc/platforms/512x/Makefile
+++ b/arch/powerpc/platforms/512x/Makefile
@@ -5,4 +5,5 @@ obj-$(CONFIG_COMMON_CLK)	+= clock-commonclk.o
 obj-y				+= mpc512x_shared.o
 obj-$(CONFIG_MPC5121_ADS)	+= mpc5121_ads.o mpc5121_ads_cpld.o
 obj-$(CONFIG_MPC512x_GENERIC)	+= mpc512x_generic.o
+obj-$(CONFIG_MPC512x_LPBFIFO)	+= mpc512x_lpbfifo.o
 obj-$(CONFIG_PDM360NG)		+= pdm360ng.o
diff --git a/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c b/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c
new file mode 100644
index 0000000..8eb82b0
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c
@@ -0,0 +1,540 @@
+/*
+ * The driver for Freescale MPC512x LocalPlus Bus FIFO
+ * (called SCLPC in the Reference Manual).
+ *
+ * Copyright (C) 2013-2015 Alexander Popov <alex.popov@linux.com>.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/mpc5121.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-direction.h>
+#include <linux/dma-mapping.h>
+
+#define DRV_NAME "mpc512x_lpbfifo"
+
+struct cs_range {
+	u32 csnum;
+	u32 base; /* must be zero */
+	u32 addr;
+	u32 size;
+};
+
+static struct lpbfifo_data {
+	spinlock_t lock; /* for protecting lpbfifo_data */
+	phys_addr_t regs_phys;
+	resource_size_t regs_size;
+	struct mpc512x_lpbfifo __iomem *regs;
+	int irq;
+	struct cs_range *cs_ranges;
+	size_t cs_n;
+	struct dma_chan *chan;
+	struct mpc512x_lpbfifo_request *req;
+	dma_addr_t ram_bus_addr;
+	bool wait_lpbfifo_irq;
+	bool wait_lpbfifo_callback;
+} lpbfifo;
+
+/*
+ * A data transfer from RAM to some device on LPB is finished
+ * when both mpc512x_lpbfifo_irq() and mpc512x_lpbfifo_callback()
+ * have been called. We execute the callback registered in
+ * mpc512x_lpbfifo_request just after that.
+ * But for a data transfer from some device on LPB to RAM we don't enable
+ * LPBFIFO interrupt because clearing MPC512X_SCLPC_SUCCESS interrupt flag
+ * automatically disables LPBFIFO reading request to the DMA controller
+ * and the data transfer hangs. So the callback registered in
+ * mpc512x_lpbfifo_request is executed at the end of mpc512x_lpbfifo_callback().
+ */
+
+/*
+ * mpc512x_lpbfifo_irq - IRQ handler for LPB FIFO
+ */
+static irqreturn_t mpc512x_lpbfifo_irq(int irq, void *param)
+{
+	struct device *dev = (struct device *)param;
+	struct mpc512x_lpbfifo_request *req = NULL;
+	unsigned long flags;
+	u32 status;
+
+	spin_lock_irqsave(&lpbfifo.lock, flags);
+
+	if (!lpbfifo.regs)
+		goto end;
+
+	req = lpbfifo.req;
+	if (!req || req->dir == MPC512X_LPBFIFO_REQ_DIR_READ) {
+		dev_err(dev, "bogus LPBFIFO IRQ\n");
+		goto end;
+	}
+
+	status = in_be32(&lpbfifo.regs->status);
+	if (status != MPC512X_SCLPC_SUCCESS) {
+		dev_err(dev, "DMA transfer from RAM to peripheral failed\n");
+		out_be32(&lpbfifo.regs->enable,
+				MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
+		goto end;
+	}
+	/* Clear the interrupt flag */
+	out_be32(&lpbfifo.regs->status, MPC512X_SCLPC_SUCCESS);
+
+	lpbfifo.wait_lpbfifo_irq = false;
+
+	if (lpbfifo.wait_lpbfifo_callback)
+		goto end;
+
+	/* Transfer is finished, set the FIFO as idle */
+	lpbfifo.req = NULL;
+
+	spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+	if (req->callback)
+		req->callback(req);
+
+	return IRQ_HANDLED;
+
+ end:
+	spin_unlock_irqrestore(&lpbfifo.lock, flags);
+	return IRQ_HANDLED;
+}
+
+/*
+ * mpc512x_lpbfifo_callback is called by DMA driver when
+ * DMA transaction is finished.
+ */
+static void mpc512x_lpbfifo_callback(void *param)
+{
+	unsigned long flags;
+	struct mpc512x_lpbfifo_request *req = NULL;
+	enum dma_data_direction dir;
+
+	spin_lock_irqsave(&lpbfifo.lock, flags);
+
+	if (!lpbfifo.regs) {
+		spin_unlock_irqrestore(&lpbfifo.lock, flags);
+		return;
+	}
+
+	req = lpbfifo.req;
+	if (!req) {
+		pr_err("bogus LPBFIFO callback\n");
+		spin_unlock_irqrestore(&lpbfifo.lock, flags);
+		return;
+	}
+
+	/* Release the mapping */
+	if (req->dir == MPC512X_LPBFIFO_REQ_DIR_WRITE)
+		dir = DMA_TO_DEVICE;
+	else
+		dir = DMA_FROM_DEVICE;
+	dma_unmap_single(lpbfifo.chan->device->dev,
+			lpbfifo.ram_bus_addr, req->size, dir);
+
+	lpbfifo.wait_lpbfifo_callback = false;
+
+	if (!lpbfifo.wait_lpbfifo_irq) {
+		/* Transfer is finished, set the FIFO as idle */
+		lpbfifo.req = NULL;
+
+		spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+		if (req->callback)
+			req->callback(req);
+	} else {
+		spin_unlock_irqrestore(&lpbfifo.lock, flags);
+	}
+}
+
+static int mpc512x_lpbfifo_kick(void)
+{
+	u32 bits;
+	bool no_incr = false;
+	u32 bpt = 32; /* max bytes per LPBFIFO transaction involving DMA */
+	u32 cs = 0;
+	size_t i;
+	struct dma_device *dma_dev = NULL;
+	struct scatterlist sg;
+	enum dma_data_direction dir;
+	struct dma_slave_config dma_conf = {};
+	struct dma_async_tx_descriptor *dma_tx = NULL;
+	dma_cookie_t cookie;
+	int ret;
+
+	/*
+	 * 1. Fit the requirements:
+	 * - the packet size must be a multiple of 4 since FIFO Data Word
+	 *    Register allows only full-word access according the Reference
+	 *    Manual;
+	 * - the physical address of the device on LPB and the packet size
+	 *    must be aligned on BPT (bytes per transaction) or 8-bytes
+	 *    boundary according the Reference Manual;
+	 * - but we choose DMA maxburst equal (or very close to) BPT to prevent
+	 *    DMA controller from overtaking FIFO and causing FIFO underflow
+	 *    error. So we force the packet size to be aligned on BPT boundary
+	 *    not to confuse DMA driver which requires the packet size to be
+	 *    aligned on maxburst boundary;
+	 * - BPT should be set to the LPB device port size for operation with
+	 *    disabled auto-incrementing according Reference Manual.
+	 */
+	if (lpbfifo.req->size == 0 || !IS_ALIGNED(lpbfifo.req->size, 4))
+		return -EINVAL;
+
+	if (lpbfifo.req->portsize != LPB_DEV_PORTSIZE_UNDEFINED) {
+		bpt = lpbfifo.req->portsize;
+		no_incr = true;
+	}
+
+	while (bpt > 1) {
+		if (IS_ALIGNED(lpbfifo.req->dev_phys_addr, min(bpt, 0x8u)) &&
+					IS_ALIGNED(lpbfifo.req->size, bpt)) {
+			break;
+		}
+
+		if (no_incr)
+			return -EINVAL;
+
+		bpt >>= 1;
+	}
+	dma_conf.dst_maxburst = max(bpt, 0x4u) / 4;
+	dma_conf.src_maxburst = max(bpt, 0x4u) / 4;
+
+	for (i = 0; i < lpbfifo.cs_n; i++) {
+		phys_addr_t cs_start = lpbfifo.cs_ranges[i].addr;
+		phys_addr_t cs_end = cs_start + lpbfifo.cs_ranges[i].size;
+		phys_addr_t access_start = lpbfifo.req->dev_phys_addr;
+		phys_addr_t access_end = access_start + lpbfifo.req->size;
+
+		if (access_start >= cs_start && access_end <= cs_end) {
+			cs = lpbfifo.cs_ranges[i].csnum;
+			break;
+		}
+	}
+	if (i == lpbfifo.cs_n)
+		return -EFAULT;
+
+	/* 2. Prepare DMA */
+	dma_dev = lpbfifo.chan->device;
+
+	if (lpbfifo.req->dir == MPC512X_LPBFIFO_REQ_DIR_WRITE) {
+		dir = DMA_TO_DEVICE;
+		dma_conf.direction = DMA_MEM_TO_DEV;
+		dma_conf.dst_addr = lpbfifo.regs_phys +
+				offsetof(struct mpc512x_lpbfifo, data_word);
+	} else {
+		dir = DMA_FROM_DEVICE;
+		dma_conf.direction = DMA_DEV_TO_MEM;
+		dma_conf.src_addr = lpbfifo.regs_phys +
+				offsetof(struct mpc512x_lpbfifo, data_word);
+	}
+	dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+
+	/* Make DMA channel work with LPB FIFO data register */
+	if (dma_dev->device_config(lpbfifo.chan, &dma_conf)) {
+		ret = -EINVAL;
+		goto err_dma_prep;
+	}
+
+	sg_init_table(&sg, 1);
+
+	sg_dma_address(&sg) = dma_map_single(dma_dev->dev,
+			lpbfifo.req->ram_virt_addr, lpbfifo.req->size, dir);
+	if (dma_mapping_error(dma_dev->dev, sg_dma_address(&sg)))
+		return -EFAULT;
+
+	lpbfifo.ram_bus_addr = sg_dma_address(&sg); /* For freeing later */
+
+	sg_dma_len(&sg) = lpbfifo.req->size;
+
+	dma_tx = dmaengine_prep_slave_sg(lpbfifo.chan, &sg,
+						1, dma_conf.direction, 0);
+	if (!dma_tx) {
+		ret = -ENOSPC;
+		goto err_dma_prep;
+	}
+	dma_tx->callback = mpc512x_lpbfifo_callback;
+	dma_tx->callback_param = NULL;
+
+	/* 3. Prepare FIFO */
+	out_be32(&lpbfifo.regs->enable,
+				MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
+	out_be32(&lpbfifo.regs->enable, 0x0);
+
+	/*
+	 * Configure the watermarks for write operation (RAM->DMA->FIFO->dev):
+	 * - high watermark 7 words according the Reference Manual,
+	 * - low watermark 512 bytes (half of the FIFO).
+	 * These watermarks don't work for read operation since the
+	 * MPC512X_SCLPC_FLUSH bit is set (according the Reference Manual).
+	 */
+	out_be32(&lpbfifo.regs->fifo_ctrl, MPC512X_SCLPC_FIFO_CTRL(0x7));
+	out_be32(&lpbfifo.regs->fifo_alarm, MPC512X_SCLPC_FIFO_ALARM(0x200));
+
+	/*
+	 * Start address is a physical address of the region which belongs
+	 * to the device on the LocalPlus Bus
+	 */
+	out_be32(&lpbfifo.regs->start_addr, lpbfifo.req->dev_phys_addr);
+
+	/*
+	 * Configure chip select, transfer direction, address increment option
+	 * and bytes per transaction option
+	 */
+	bits = MPC512X_SCLPC_CS(cs);
+	if (lpbfifo.req->dir == MPC512X_LPBFIFO_REQ_DIR_READ)
+		bits |= MPC512X_SCLPC_READ | MPC512X_SCLPC_FLUSH;
+	if (no_incr)
+		bits |= MPC512X_SCLPC_DAI;
+	bits |= MPC512X_SCLPC_BPT(bpt);
+	out_be32(&lpbfifo.regs->ctrl, bits);
+
+	/* Unmask irqs */
+	bits = MPC512X_SCLPC_ENABLE | MPC512X_SCLPC_ABORT_INT_ENABLE;
+	if (lpbfifo.req->dir == MPC512X_LPBFIFO_REQ_DIR_WRITE)
+		bits |= MPC512X_SCLPC_NORM_INT_ENABLE;
+	else
+		lpbfifo.wait_lpbfifo_irq = false;
+
+	out_be32(&lpbfifo.regs->enable, bits);
+
+	/* 4. Set packet size and kick FIFO off */
+	bits = lpbfifo.req->size | MPC512X_SCLPC_START;
+	out_be32(&lpbfifo.regs->pkt_size, bits);
+
+	/* 5. Finally kick DMA off */
+	cookie = dma_tx->tx_submit(dma_tx);
+	if (dma_submit_error(cookie)) {
+		ret = -ENOSPC;
+		goto err_dma_submit;
+	}
+
+	return 0;
+
+ err_dma_submit:
+	out_be32(&lpbfifo.regs->enable,
+				MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
+ err_dma_prep:
+	dma_unmap_single(dma_dev->dev, sg_dma_address(&sg),
+						lpbfifo.req->size, dir);
+	return ret;
+}
+
+static int mpc512x_lpbfifo_submit_locked(struct mpc512x_lpbfifo_request *req)
+{
+	int ret = 0;
+
+	if (!lpbfifo.regs)
+		return -ENODEV;
+
+	/* Check whether a transfer is in progress */
+	if (lpbfifo.req)
+		return -EBUSY;
+
+	lpbfifo.wait_lpbfifo_irq = true;
+	lpbfifo.wait_lpbfifo_callback = true;
+	lpbfifo.req = req;
+
+	ret = mpc512x_lpbfifo_kick();
+	if (ret != 0)
+		lpbfifo.req = NULL; /* Set the FIFO as idle */
+
+	return ret;
+}
+
+int mpc512x_lpbfifo_submit(struct mpc512x_lpbfifo_request *req)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&lpbfifo.lock, flags);
+	ret = mpc512x_lpbfifo_submit_locked(req);
+	spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(mpc512x_lpbfifo_submit);
+
+/*
+ * LPBFIFO driver uses "ranges" property of "localbus" device tree node
+ * for being able to determine the chip select number of a client device
+ * ordering a DMA transfer.
+ */
+static int get_cs_ranges(struct device *dev)
+{
+	int ret = -ENODEV;
+	struct device_node *lb_node;
+	const u32 *addr_cells_p;
+	const u32 *size_cells_p;
+	int proplen;
+	size_t i;
+
+	lb_node = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-localbus");
+	if (!lb_node)
+		return ret;
+
+	/*
+	 * The node defined as compatible with 'fsl,mpc5121-localbus'
+	 * should have two address cells and one size cell.
+	 * Every item of its ranges property should consist of:
+	 * - the first address cell which is the chipselect number;
+	 * - the second address cell which is the offset in the chipselect,
+	 *    must be zero.
+	 * - CPU address of the beginning of an access window;
+	 * - the only size cell which is the size of an access window.
+	 */
+	addr_cells_p = of_get_property(lb_node, "#address-cells", NULL);
+	size_cells_p = of_get_property(lb_node, "#size-cells", NULL);
+	if (addr_cells_p == NULL || *addr_cells_p != 2 ||
+				size_cells_p == NULL ||	*size_cells_p != 1) {
+		goto end;
+	}
+
+	proplen = of_property_count_u32_elems(lb_node, "ranges");
+	if (proplen <= 0 || proplen % 4 != 0)
+		goto end;
+
+	lpbfifo.cs_n = proplen / 4;
+	lpbfifo.cs_ranges = devm_kcalloc(dev, lpbfifo.cs_n,
+					sizeof(struct cs_range), GFP_KERNEL);
+	if (!lpbfifo.cs_ranges)
+		goto end;
+
+	if (of_property_read_u32_array(lb_node, "ranges",
+				(u32 *)lpbfifo.cs_ranges, proplen) != 0) {
+		goto end;
+	}
+
+	for (i = 0; i < lpbfifo.cs_n; i++) {
+		if (lpbfifo.cs_ranges[i].base != 0)
+			goto end;
+	}
+
+	ret = 0;
+
+ end:
+	of_node_put(lb_node);
+	return ret;
+}
+
+static int mpc512x_lpbfifo_probe(struct platform_device *pdev)
+{
+	struct resource r;
+	int ret = 0;
+
+	memset(&lpbfifo, 0, sizeof(struct lpbfifo_data));
+	spin_lock_init(&lpbfifo.lock);
+
+	lpbfifo.chan = dma_request_slave_channel(&pdev->dev, "rx-tx");
+	if (lpbfifo.chan == NULL)
+		return -EPROBE_DEFER;
+
+	if (of_address_to_resource(pdev->dev.of_node, 0, &r) != 0) {
+		dev_err(&pdev->dev, "bad 'reg' in 'sclpc' device tree node\n");
+		ret = -ENODEV;
+		goto err0;
+	}
+
+	lpbfifo.regs_phys = r.start;
+	lpbfifo.regs_size = resource_size(&r);
+
+	if (!devm_request_mem_region(&pdev->dev, lpbfifo.regs_phys,
+					lpbfifo.regs_size, DRV_NAME)) {
+		dev_err(&pdev->dev, "unable to request region\n");
+		ret = -EBUSY;
+		goto err0;
+	}
+
+	lpbfifo.regs = devm_ioremap(&pdev->dev,
+					lpbfifo.regs_phys, lpbfifo.regs_size);
+	if (!lpbfifo.regs) {
+		dev_err(&pdev->dev, "mapping registers failed\n");
+		ret = -ENOMEM;
+		goto err0;
+	}
+
+	out_be32(&lpbfifo.regs->enable,
+				MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
+
+	if (get_cs_ranges(&pdev->dev) != 0) {
+		dev_err(&pdev->dev, "bad '/localbus' device tree node\n");
+		ret = -ENODEV;
+		goto err0;
+	}
+
+	lpbfifo.irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	if (lpbfifo.irq == NO_IRQ) {
+		dev_err(&pdev->dev, "mapping irq failed\n");
+		ret = -ENODEV;
+		goto err0;
+	}
+
+	if (request_irq(lpbfifo.irq, mpc512x_lpbfifo_irq, 0,
+						DRV_NAME, &pdev->dev) != 0) {
+		dev_err(&pdev->dev, "requesting irq failed\n");
+		ret = -ENODEV;
+		goto err1;
+	}
+
+	dev_info(&pdev->dev, "probe succeeded\n");
+	return 0;
+
+ err1:
+	irq_dispose_mapping(lpbfifo.irq);
+ err0:
+	dma_release_channel(lpbfifo.chan);
+	return ret;
+}
+
+static int mpc512x_lpbfifo_remove(struct platform_device *pdev)
+{
+	unsigned long flags;
+	struct dma_device *dma_dev = lpbfifo.chan->device;
+	struct mpc512x_lpbfifo __iomem *regs = NULL;
+
+	spin_lock_irqsave(&lpbfifo.lock, flags);
+	regs = lpbfifo.regs;
+	lpbfifo.regs = NULL;
+	spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+	dma_dev->device_terminate_all(lpbfifo.chan);
+	out_be32(&regs->enable, MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
+
+	free_irq(lpbfifo.irq, &pdev->dev);
+	irq_dispose_mapping(lpbfifo.irq);
+	dma_release_channel(lpbfifo.chan);
+
+	return 0;
+}
+
+static const struct of_device_id mpc512x_lpbfifo_match[] = {
+	{ .compatible = "fsl,mpc512x-lpbfifo", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mpc512x_lpbfifo_match);
+
+static struct platform_driver mpc512x_lpbfifo_driver = {
+	.probe = mpc512x_lpbfifo_probe,
+	.remove = mpc512x_lpbfifo_remove,
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = mpc512x_lpbfifo_match,
+	},
+};
+
+module_platform_driver(mpc512x_lpbfifo_driver);
+
+MODULE_AUTHOR("Alexander Popov <alex.popov@linux.com>");
+MODULE_DESCRIPTION("MPC512x LocalPlus Bus FIFO device driver");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index 78ac19a..3048e34 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -724,7 +724,7 @@ static int mpc52xx_gpt_probe(struct platform_device *ofdev)
 {
 	struct mpc52xx_gpt_priv *gpt;
 
-	gpt = kzalloc(sizeof *gpt, GFP_KERNEL);
+	gpt = devm_kzalloc(&ofdev->dev, sizeof *gpt, GFP_KERNEL);
 	if (!gpt)
 		return -ENOMEM;
 
@@ -732,10 +732,8 @@ static int mpc52xx_gpt_probe(struct platform_device *ofdev)
 	gpt->dev = &ofdev->dev;
 	gpt->ipb_freq = mpc5xxx_get_bus_frequency(ofdev->dev.of_node);
 	gpt->regs = of_iomap(ofdev->dev.of_node, 0);
-	if (!gpt->regs) {
-		kfree(gpt);
+	if (!gpt->regs)
 		return -ENOMEM;
-	}
 
 	dev_set_drvdata(&ofdev->dev, gpt);
 
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
index 251dcb9..7bb42a0 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
@@ -568,6 +568,7 @@ static const struct of_device_id mpc52xx_lpbfifo_match[] = {
 	{ .compatible = "fsl,mpc5200-lpbfifo", },
 	{},
 };
+MODULE_DEVICE_TABLE(of, mpc52xx_lpbfifo_match);
 
 static struct platform_driver mpc52xx_lpbfifo_driver = {
 	.driver = {
diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index b395571..46d05c9 100644
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -161,6 +161,7 @@ static const char * const boards[] __initconst = {
 	"fsl,T1042RDB",
 	"fsl,T1042RDB_PI",
 	"keymile,kmcoge4",
+	"varisys,CYRUS",
 	NULL
 };
 
@@ -214,7 +215,17 @@ define_machine(corenet_generic) {
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
 	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
+/*
+ * Core reset may cause issues if using the proxy mode of MPIC.
+ * So, use the mixed mode of MPIC if enabling CPU hotplug.
+ *
+ * Likewise, problems have been seen with kexec when coreint is enabled.
+ */
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_KEXEC)
+	.get_irq		= mpic_get_irq,
+#else
 	.get_irq		= mpic_get_coreint_irq,
+#endif
 	.restart		= fsl_rstcr_restart,
 	.calibrate_decr		= generic_calibrate_decr,
 	.progress		= udbg_progress,
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index a392e94..f0be439 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -34,6 +34,7 @@
 #include <linux/of_device.h>
 #include <linux/phy.h>
 #include <linux/memblock.h>
+#include <linux/fsl/guts.h>
 
 #include <linux/atomic.h>
 #include <asm/time.h>
@@ -51,7 +52,6 @@
 #include <asm/qe_ic.h>
 #include <asm/mpic.h>
 #include <asm/swiotlb.h>
-#include <asm/fsl_guts.h>
 #include "smp.h"
 
 #include "mpc85xx.h"
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index e358bed..50dcc00 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -17,6 +17,7 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
+#include <linux/fsl/guts.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -27,7 +28,6 @@
 #include <asm/mpic.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
-#include <asm/fsl_guts.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index 6ac986d..371df82 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -16,6 +16,7 @@
  * kind, whether express or implied.
  */
 
+#include <linux/fsl/guts.h>
 #include <linux/pci.h>
 #include <linux/of_platform.h>
 #include <asm/div64.h>
@@ -25,7 +26,6 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include <asm/udbg.h>
-#include <asm/fsl_guts.h>
 #include <asm/fsl_lbc.h>
 #include "smp.h"
 
diff --git a/arch/powerpc/platforms/85xx/p1022_rdk.c b/arch/powerpc/platforms/85xx/p1022_rdk.c
index 680232d..5087bec 100644
--- a/arch/powerpc/platforms/85xx/p1022_rdk.c
+++ b/arch/powerpc/platforms/85xx/p1022_rdk.c
@@ -12,6 +12,7 @@
  * kind, whether express or implied.
  */
 
+#include <linux/fsl/guts.h>
 #include <linux/pci.h>
 #include <linux/of_platform.h>
 #include <asm/div64.h>
@@ -21,7 +22,6 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include <asm/udbg.h>
-#include <asm/fsl_guts.h>
 #include "smp.h"
 
 #include "mpc85xx.h"
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index b8b8216..6b107ce 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -19,6 +19,7 @@
 #include <linux/kexec.h>
 #include <linux/highmem.h>
 #include <linux/cpu.h>
+#include <linux/fsl/guts.h>
 
 #include <asm/machdep.h>
 #include <asm/pgtable.h>
@@ -26,7 +27,6 @@
 #include <asm/mpic.h>
 #include <asm/cacheflush.h>
 #include <asm/dbell.h>
-#include <asm/fsl_guts.h>
 #include <asm/code-patching.h>
 #include <asm/cputhreads.h>
 
@@ -173,15 +173,22 @@ static inline u32 read_spin_table_addr_l(void *spin_table)
 static void wake_hw_thread(void *info)
 {
 	void fsl_secondary_thread_init(void);
-	unsigned long imsr1, inia1;
+	unsigned long imsr, inia;
 	int nr = *(const int *)info;
 
-	imsr1 = MSR_KERNEL;
-	inia1 = *(unsigned long *)fsl_secondary_thread_init;
-
-	mttmr(TMRN_IMSR1, imsr1);
-	mttmr(TMRN_INIA1, inia1);
-	mtspr(SPRN_TENS, TEN_THREAD(1));
+	imsr = MSR_KERNEL;
+	inia = *(unsigned long *)fsl_secondary_thread_init;
+
+	if (cpu_thread_in_core(nr) == 0) {
+		/* For when we boot on a secondary thread with kdump */
+		mttmr(TMRN_IMSR0, imsr);
+		mttmr(TMRN_INIA0, inia);
+		mtspr(SPRN_TENS, TEN_THREAD(0));
+	} else {
+		mttmr(TMRN_IMSR1, imsr);
+		mttmr(TMRN_INIA1, inia);
+		mtspr(SPRN_TENS, TEN_THREAD(1));
+	}
 
 	smp_generic_kick_cpu(nr);
 }
@@ -224,6 +231,12 @@ static int smp_85xx_kick_cpu(int nr)
 
 		smp_call_function_single(primary, wake_hw_thread, &nr, 0);
 		return 0;
+	} else if (cpu_thread_in_core(boot_cpuid) != 0 &&
+		   cpu_first_thread_sibling(boot_cpuid) == nr) {
+		if (WARN_ON_ONCE(!cpu_has_feature(CPU_FTR_SMT)))
+			return -ENOENT;
+
+		smp_call_function_single(boot_cpuid, wake_hw_thread, &nr, 0);
 	}
 #endif
 
@@ -331,13 +344,14 @@ struct smp_ops_t smp_85xx_ops = {
 	.cpu_disable	= generic_cpu_disable,
 	.cpu_die	= generic_cpu_die,
 #endif
-#ifdef CONFIG_KEXEC
+#if defined(CONFIG_KEXEC) && !defined(CONFIG_PPC64)
 	.give_timebase	= smp_generic_give_timebase,
 	.take_timebase	= smp_generic_take_timebase,
 #endif
 };
 
 #ifdef CONFIG_KEXEC
+#ifdef CONFIG_PPC32
 atomic_t kexec_down_cpus = ATOMIC_INIT(0);
 
 void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary)
@@ -357,9 +371,64 @@ static void mpc85xx_smp_kexec_down(void *arg)
 	if (ppc_md.kexec_cpu_down)
 		ppc_md.kexec_cpu_down(0,1);
 }
+#else
+void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary)
+{
+	int cpu = smp_processor_id();
+	int sibling = cpu_last_thread_sibling(cpu);
+	bool notified = false;
+	int disable_cpu;
+	int disable_threadbit = 0;
+	long start = mftb();
+	long now;
+
+	local_irq_disable();
+	hard_irq_disable();
+	mpic_teardown_this_cpu(secondary);
+
+	if (cpu == crashing_cpu && cpu_thread_in_core(cpu) != 0) {
+		/*
+		 * We enter the crash kernel on whatever cpu crashed,
+		 * even if it's a secondary thread.  If that's the case,
+		 * disable the corresponding primary thread.
+		 */
+		disable_threadbit = 1;
+		disable_cpu = cpu_first_thread_sibling(cpu);
+	} else if (sibling != crashing_cpu &&
+		   cpu_thread_in_core(cpu) == 0 &&
+		   cpu_thread_in_core(sibling) != 0) {
+		disable_threadbit = 2;
+		disable_cpu = sibling;
+	}
+
+	if (disable_threadbit) {
+		while (paca[disable_cpu].kexec_state < KEXEC_STATE_REAL_MODE) {
+			barrier();
+			now = mftb();
+			if (!notified && now - start > 1000000) {
+				pr_info("%s/%d: waiting for cpu %d to enter KEXEC_STATE_REAL_MODE (%d)\n",
+					__func__, smp_processor_id(),
+					disable_cpu,
+					paca[disable_cpu].kexec_state);
+				notified = true;
+			}
+		}
+
+		if (notified) {
+			pr_info("%s: cpu %d done waiting\n",
+				__func__, disable_cpu);
+		}
+
+		mtspr(SPRN_TENC, disable_threadbit);
+		while (mfspr(SPRN_TENSR) & disable_threadbit)
+			cpu_relax();
+	}
+}
+#endif
 
 static void mpc85xx_smp_machine_kexec(struct kimage *image)
 {
+#ifdef CONFIG_PPC32
 	int timeout = INT_MAX;
 	int i, num_cpus = num_present_cpus();
 
@@ -380,6 +449,7 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image)
 		if ( i == smp_processor_id() ) continue;
 		mpic_reset_core(i);
 	}
+#endif
 
 	default_machine_kexec(image);
 }
diff --git a/arch/powerpc/platforms/85xx/twr_p102x.c b/arch/powerpc/platforms/85xx/twr_p102x.c
index 30e002f..892e613 100644
--- a/arch/powerpc/platforms/85xx/twr_p102x.c
+++ b/arch/powerpc/platforms/85xx/twr_p102x.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/errno.h>
+#include <linux/fsl/guts.h>
 #include <linux/pci.h>
 #include <linux/of_platform.h>
 
@@ -23,7 +24,6 @@
 #include <asm/mpic.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
-#include <asm/fsl_guts.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 55413a5..437a9c3 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -24,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/of.h>
+#include <linux/fsl/guts.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -38,7 +39,6 @@
 #include <sysdev/fsl_pci.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/simple_gpio.h>
-#include <asm/fsl_guts.h>
 
 #include "mpc86xx.h"
 
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index c140e94..142dff5 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -147,17 +147,6 @@ config 6xx
 	depends on PPC32 && PPC_BOOK3S
 	select PPC_HAVE_PMU_SUPPORT
 
-config TUNE_CELL
-	bool "Optimize for Cell Broadband Engine"
-	depends on PPC64 && PPC_BOOK3S
-	help
-	  Cause the compiler to optimize for the PPE of the Cell Broadband
-	  Engine. This will make the code run considerably faster on Cell
-	  but somewhat slower on other machines. This option only changes
-	  the scheduling of instructions, not the selection of instructions
-	  itself, so the resulting kernel will keep running on all other
-	  machines.
-
 # this is temp to handle compat with arch=ppc
 config 8xx
 	bool
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index b0ac177..429fc59 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -25,7 +25,7 @@ config PPC_CELL_NATIVE
 
 config PPC_IBM_CELL_BLADE
 	bool "IBM Cell Blade"
-	depends on PPC64 && PPC_BOOK3S
+	depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
 	select PPC_CELL_NATIVE
 	select PPC_OF_PLATFORM_PCI
 	select PCI
@@ -35,7 +35,7 @@ config PPC_IBM_CELL_BLADE
 
 config PPC_CELL_QPACE
 	bool "IBM Cell - QPACE"
-	depends on PPC64 && PPC_BOOK3S
+	depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
 	select PPC_CELL_COMMON
 
 config AXON_MSI
diff --git a/arch/powerpc/platforms/maple/Kconfig b/arch/powerpc/platforms/maple/Kconfig
index 1ea621a..e359d0d 100644
--- a/arch/powerpc/platforms/maple/Kconfig
+++ b/arch/powerpc/platforms/maple/Kconfig
@@ -1,5 +1,5 @@
 config PPC_MAPLE
-	depends on PPC64 && PPC_BOOK3S
+	depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
 	bool "Maple 970FX Evaluation Board"
 	select PCI
 	select MPIC
diff --git a/arch/powerpc/platforms/pasemi/Kconfig b/arch/powerpc/platforms/pasemi/Kconfig
index a2aeb32..00d4b28 100644
--- a/arch/powerpc/platforms/pasemi/Kconfig
+++ b/arch/powerpc/platforms/pasemi/Kconfig
@@ -1,5 +1,5 @@
 config PPC_PASEMI
-	depends on PPC64 && PPC_BOOK3S
+	depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
 	bool "PA Semi SoC-based platforms"
 	default n
 	select MPIC
diff --git a/arch/powerpc/platforms/powermac/Kconfig b/arch/powerpc/platforms/powermac/Kconfig
index 607124b..43c6062 100644
--- a/arch/powerpc/platforms/powermac/Kconfig
+++ b/arch/powerpc/platforms/powermac/Kconfig
@@ -1,6 +1,6 @@
 config PPC_PMAC
 	bool "Apple PowerMac based machines"
-	depends on PPC_BOOK3S
+	depends on PPC_BOOK3S && CPU_BIG_ENDIAN
 	select MPIC
 	select PCI
 	select PPC_INDIRECT_PCI if PPC32
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 3bb6acb..e1c9072 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -43,17 +43,11 @@
 static bool pnv_eeh_nb_init = false;
 static int eeh_event_irq = -EINVAL;
 
-/**
- * pnv_eeh_init - EEH platform dependent initialization
- *
- * EEH platform dependent initialization on powernv
- */
 static int pnv_eeh_init(void)
 {
 	struct pci_controller *hose;
 	struct pnv_phb *phb;
 
-	/* We require OPALv3 */
 	if (!firmware_has_feature(FW_FEATURE_OPALv3)) {
 		pr_warn("%s: OPALv3 is required !\n",
 			__func__);
@@ -77,9 +71,9 @@ static int pnv_eeh_init(void)
 		/*
 		 * PE#0 should be regarded as valid by EEH core
 		 * if it's not the reserved one. Currently, we
-		 * have the reserved PE#0 and PE#127 for PHB3
+		 * have the reserved PE#255 and PE#127 for PHB3
 		 * and P7IOC separately. So we should regard
-		 * PE#0 as valid for P7IOC.
+		 * PE#0 as valid for PHB3 and P7IOC.
 		 */
 		if (phb->ioda.reserved_pe != 0)
 			eeh_add_flag(EEH_VALID_PE_ZERO);
@@ -284,33 +278,23 @@ static int pnv_eeh_post_init(void)
 #endif /* CONFIG_DEBUG_FS */
 	}
 
-
 	return ret;
 }
 
-static int pnv_eeh_cap_start(struct pci_dn *pdn)
+static int pnv_eeh_find_cap(struct pci_dn *pdn, int cap)
 {
-	u32 status;
+	int pos = PCI_CAPABILITY_LIST;
+	int cnt = 48;   /* Maximal number of capabilities */
+	u32 status, id;
 
 	if (!pdn)
 		return 0;
 
+	/* Check if the device supports capabilities */
 	pnv_pci_cfg_read(pdn, PCI_STATUS, 2, &status);
 	if (!(status & PCI_STATUS_CAP_LIST))
 		return 0;
 
-	return PCI_CAPABILITY_LIST;
-}
-
-static int pnv_eeh_find_cap(struct pci_dn *pdn, int cap)
-{
-	int pos = pnv_eeh_cap_start(pdn);
-	int cnt = 48;   /* Maximal number of capabilities */
-	u32 id;
-
-	if (!pos)
-		return 0;
-
 	while (cnt--) {
 		pnv_pci_cfg_read(pdn, pos, 1, &pos);
 		if (pos < 0x40)
@@ -443,11 +427,14 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 	 * that PE to block its config space.
 	 *
 	 * Broadcom Austin 4-ports NICs (14e4:1657)
+	 * Broadcom Shiner 4-ports 1G NICs (14e4:168a)
 	 * Broadcom Shiner 2-ports 10G NICs (14e4:168e)
 	 */
 	if ((pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
 	     pdn->device_id == 0x1657) ||
 	    (pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
+	     pdn->device_id == 0x168a) ||
+	    (pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
 	     pdn->device_id == 0x168e))
 		edev->pe->state |= EEH_PE_CFG_RESTRICTED;
 
@@ -487,10 +474,9 @@ static int pnv_eeh_set_option(struct eeh_pe *pe, int option)
 	struct pci_controller *hose = pe->phb;
 	struct pnv_phb *phb = hose->private_data;
 	bool freeze_pe = false;
-	int opt, ret = 0;
+	int opt;
 	s64 rc;
 
-	/* Sanity check on option */
 	switch (option) {
 	case EEH_OPT_DISABLE:
 		return -EPERM;
@@ -511,38 +497,37 @@ static int pnv_eeh_set_option(struct eeh_pe *pe, int option)
 		return -EINVAL;
 	}
 
-	/* If PHB supports compound PE, to handle it */
+	/* Freeze master and slave PEs if PHB supports compound PEs */
 	if (freeze_pe) {
 		if (phb->freeze_pe) {
 			phb->freeze_pe(phb, pe->addr);
-		} else {
-			rc = opal_pci_eeh_freeze_set(phb->opal_id,
-						     pe->addr, opt);
-			if (rc != OPAL_SUCCESS) {
-				pr_warn("%s: Failure %lld freezing "
-					"PHB#%x-PE#%x\n",
-					__func__, rc,
-					phb->hose->global_number, pe->addr);
-				ret = -EIO;
-			}
+			return 0;
 		}
-	} else {
-		if (phb->unfreeze_pe) {
-			ret = phb->unfreeze_pe(phb, pe->addr, opt);
-		} else {
-			rc = opal_pci_eeh_freeze_clear(phb->opal_id,
-						       pe->addr, opt);
-			if (rc != OPAL_SUCCESS) {
-				pr_warn("%s: Failure %lld enable %d "
-					"for PHB#%x-PE#%x\n",
-					__func__, rc, option,
-					phb->hose->global_number, pe->addr);
-				ret = -EIO;
-			}
+
+		rc = opal_pci_eeh_freeze_set(phb->opal_id, pe->addr, opt);
+		if (rc != OPAL_SUCCESS) {
+			pr_warn("%s: Failure %lld freezing PHB#%x-PE#%x\n",
+				__func__, rc, phb->hose->global_number,
+				pe->addr);
+			return -EIO;
 		}
+
+		return 0;
 	}
 
-	return ret;
+	/* Unfreeze master and slave PEs if PHB supports */
+	if (phb->unfreeze_pe)
+		return phb->unfreeze_pe(phb, pe->addr, opt);
+
+	rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe->addr, opt);
+	if (rc != OPAL_SUCCESS) {
+		pr_warn("%s: Failure %lld enable %d for PHB#%x-PE#%x\n",
+			__func__, rc, option, phb->hose->global_number,
+			pe->addr);
+		return -EIO;
+	}
+
+	return 0;
 }
 
 /**
@@ -1065,7 +1050,6 @@ static int pnv_eeh_err_inject(struct eeh_pe *pe, int type, int func,
 	struct pnv_phb *phb = hose->private_data;
 	s64 rc;
 
-	/* Sanity check on error type */
 	if (type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR &&
 	    type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64) {
 		pr_warn("%s: Invalid error type %d\n",
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index 685b3cb..a9a8fa3 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -187,7 +187,7 @@ static void pnv_kexec_wait_secondaries_down(void)
 
 	for_each_online_cpu(i) {
 		uint8_t status;
-		int64_t rc;
+		int64_t rc, timeout = 1000;
 
 		if (i == my_cpu)
 			continue;
@@ -204,6 +204,18 @@ static void pnv_kexec_wait_secondaries_down(void)
 				       i, paca[i].hw_cpu_id);
 				notified = i;
 			}
+
+			/*
+			 * On crash secondaries might be unreachable or hung,
+			 * so timeout if we've waited too long
+			 * */
+			mdelay(1);
+			if (timeout-- == 0) {
+				printk(KERN_ERR "kexec: timed out waiting for "
+				       "cpu %d (physical %d) to enter OPAL\n",
+				       i, paca[i].hw_cpu_id);
+				break;
+			}
 		}
 	}
 }
@@ -225,13 +237,6 @@ static void pnv_kexec_cpu_down(int crash_shutdown, int secondary)
 
 		/* Return the CPU to OPAL */
 		opal_return_cpu();
-	} else if (crash_shutdown) {
-		/*
-		 * On crash, we don't wait for secondaries to go
-		 * down as they might be unreachable or hung, so
-		 * instead we just wait a bit and move on.
-		 */
-		mdelay(1);
 	} else {
 		/* Primary waits for the secondaries to have reached OPAL */
 		pnv_kexec_wait_secondaries_down();
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index 56f2740..b27f40f 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -1,6 +1,6 @@
 config PPC_PS3
 	bool "Sony PS3"
-	depends on PPC64 && PPC_BOOK3S
+	depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
 	select PPC_CELL
 	select USB_OHCI_LITTLE_ENDIAN
 	select USB_OHCI_BIG_ENDIAN_MMIO
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 54c87d5..bec90fb 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -4,6 +4,7 @@ config PPC_PSERIES
 	select HAVE_PCSPKR_PLATFORM
 	select MPIC
 	select OF_DYNAMIC
+	select PCI
 	select PCI_MSI
 	select PPC_XICS
 	select PPC_ICP_NATIVE
@@ -15,7 +16,6 @@ config PPC_PSERIES
 	select RTAS_ERROR_LOGGING
 	select PPC_UDBG_16550
 	select PPC_NATIVE
-	select PPC_PCI_CHOICE if EXPERT
 	select PPC_DOORBELL
 	select HAVE_CONTEXT_TRACKING
 	select HOTPLUG_CPU if SMP
@@ -43,11 +43,6 @@ config DTL
 
 	  Say N if you are unsure.
 
-config PSERIES_MSI
-       bool
-       depends on PCI_MSI && PPC_PSERIES && EEH
-       default y
-
 config PSERIES_ENERGY
 	tristate "pSeries energy management capabilities driver"
 	depends on PPC_PSERIES
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 0348079..fedc2cc 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -2,14 +2,13 @@ ccflags-$(CONFIG_PPC64)			:= $(NO_MINIMAL_TOC)
 ccflags-$(CONFIG_PPC_PSERIES_DEBUG)	+= -DDEBUG
 
 obj-y			:= lpar.o hvCall.o nvram.o reconfig.o \
+			   of_helpers.o \
 			   setup.o iommu.o event_sources.o ras.o \
-			   firmware.o power.o dlpar.o mobility.o rng.o
+			   firmware.o power.o dlpar.o mobility.o rng.o \
+			   pci.o pci_dlpar.o eeh_pseries.o msi.o
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_SCANLOG)	+= scanlog.o
-obj-$(CONFIG_EEH)	+= eeh_pseries.o
 obj-$(CONFIG_KEXEC)	+= kexec.o
-obj-$(CONFIG_PCI)	+= pci.o pci_dlpar.o
-obj-$(CONFIG_PSERIES_MSI)	+= msi.o
 obj-$(CONFIG_PSERIES_ENERGY)	+= pseries_energy.o
 
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug-cpu.o
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index db17827..f244dcb 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -18,6 +18,8 @@
 #include <linux/cpu.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+
+#include "of_helpers.h"
 #include "offline_states.h"
 #include "pseries.h"
 
@@ -244,36 +246,13 @@ cc_error:
 	return first_dn;
 }
 
-static struct device_node *derive_parent(const char *path)
-{
-	struct device_node *parent;
-	char *last_slash;
-
-	last_slash = strrchr(path, '/');
-	if (last_slash == path) {
-		parent = of_find_node_by_path("/");
-	} else {
-		char *parent_path;
-		int parent_path_len = last_slash - path + 1;
-		parent_path = kmalloc(parent_path_len, GFP_KERNEL);
-		if (!parent_path)
-			return NULL;
-
-		strlcpy(parent_path, path, parent_path_len);
-		parent = of_find_node_by_path(parent_path);
-		kfree(parent_path);
-	}
-
-	return parent;
-}
-
 int dlpar_attach_node(struct device_node *dn)
 {
 	int rc;
 
-	dn->parent = derive_parent(dn->full_name);
-	if (!dn->parent)
-		return -ENOMEM;
+	dn->parent = pseries_of_derive_parent(dn->full_name);
+	if (IS_ERR(dn->parent))
+		return PTR_ERR(dn->parent);
 
 	rc = of_attach_node(dn);
 	if (rc) {
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 1ba55d0..ac3ffd9 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -433,42 +433,34 @@ static int pseries_eeh_get_state(struct eeh_pe *pe, int *state)
 		return ret;
 
 	/* Parse the result out */
-	result = 0;
-	if (rets[1]) {
-		switch(rets[0]) {
-		case 0:
-			result &= ~EEH_STATE_RESET_ACTIVE;
-			result |= EEH_STATE_MMIO_ACTIVE;
-			result |= EEH_STATE_DMA_ACTIVE;
-			break;
-		case 1:
-			result |= EEH_STATE_RESET_ACTIVE;
-			result |= EEH_STATE_MMIO_ACTIVE;
-			result |= EEH_STATE_DMA_ACTIVE;
-			break;
-		case 2:
-			result &= ~EEH_STATE_RESET_ACTIVE;
-			result &= ~EEH_STATE_MMIO_ACTIVE;
-			result &= ~EEH_STATE_DMA_ACTIVE;
-			break;
-		case 4:
-			result &= ~EEH_STATE_RESET_ACTIVE;
-			result &= ~EEH_STATE_MMIO_ACTIVE;
-			result &= ~EEH_STATE_DMA_ACTIVE;
-			result |= EEH_STATE_MMIO_ENABLED;
-			break;
-		case 5:
-			if (rets[2]) {
-				if (state) *state = rets[2];
-				result = EEH_STATE_UNAVAILABLE;
-			} else {
-				result = EEH_STATE_NOT_SUPPORT;
-			}
-			break;
-		default:
+	if (!rets[1])
+		return EEH_STATE_NOT_SUPPORT;
+
+	switch(rets[0]) {
+	case 0:
+		result = EEH_STATE_MMIO_ACTIVE |
+			 EEH_STATE_DMA_ACTIVE;
+		break;
+	case 1:
+		result = EEH_STATE_RESET_ACTIVE |
+			 EEH_STATE_MMIO_ACTIVE  |
+			 EEH_STATE_DMA_ACTIVE;
+		break;
+	case 2:
+		result = 0;
+		break;
+	case 4:
+		result = EEH_STATE_MMIO_ENABLED;
+		break;
+	case 5:
+		if (rets[2]) {
+			if (state) *state = rets[2];
+			result = EEH_STATE_UNAVAILABLE;
+		} else {
 			result = EEH_STATE_NOT_SUPPORT;
 		}
-	} else {
+		break;
+	default:
 		result = EEH_STATE_NOT_SUPPORT;
 	}
 
diff --git a/arch/powerpc/platforms/pseries/hvcserver.c b/arch/powerpc/platforms/pseries/hvcserver.c
index eedb645..94a6e56 100644
--- a/arch/powerpc/platforms/pseries/hvcserver.c
+++ b/arch/powerpc/platforms/pseries/hvcserver.c
@@ -142,11 +142,11 @@ int hvcs_get_partner_info(uint32_t unit_address, struct list_head *head,
 	int more = 1;
 	int retval;
 
-	memset(pi_buff, 0x00, PAGE_SIZE);
 	/* invalid parameters */
 	if (!head || !pi_buff)
 		return -EINVAL;
 
+	memset(pi_buff, 0x00, PAGE_SIZE);
 	last_p_partition_ID = last_p_unit_address = ~0UL;
 	INIT_LIST_HEAD(head);
 
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 0946b98..bd98ce2 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -532,7 +532,6 @@ static int tce_setrange_multi_pSeriesLP_walk(unsigned long start_pfn,
 	return tce_setrange_multi_pSeriesLP(start_pfn, num_pfn, arg);
 }
 
-#ifdef CONFIG_PCI
 static void iommu_table_setparms(struct pci_controller *phb,
 				 struct device_node *dn,
 				 struct iommu_table *tbl)
@@ -1292,15 +1291,6 @@ static u64 dma_get_required_mask_pSeriesLP(struct device *dev)
 	return dma_iommu_ops.get_required_mask(dev);
 }
 
-#else  /* CONFIG_PCI */
-#define pci_dma_bus_setup_pSeries	NULL
-#define pci_dma_dev_setup_pSeries	NULL
-#define pci_dma_bus_setup_pSeriesLP	NULL
-#define pci_dma_dev_setup_pSeriesLP	NULL
-#define dma_set_mask_pSeriesLP		NULL
-#define dma_get_required_mask_pSeriesLP	NULL
-#endif /* !CONFIG_PCI */
-
 static int iommu_mem_notifier(struct notifier_block *nb, unsigned long action,
 		void *data)
 {
diff --git a/arch/powerpc/platforms/pseries/of_helpers.c b/arch/powerpc/platforms/pseries/of_helpers.c
new file mode 100644
index 0000000..2798933
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/of_helpers.c
@@ -0,0 +1,38 @@
+#include <linux/string.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include "of_helpers.h"
+
+/**
+ * pseries_of_derive_parent - basically like dirname(1)
+ * @path:  the full_name of a node to be added to the tree
+ *
+ * Returns the node which should be the parent of the node
+ * described by path.  E.g., for path = "/foo/bar", returns
+ * the node with full_name = "/foo".
+ */
+struct device_node *pseries_of_derive_parent(const char *path)
+{
+	struct device_node *parent;
+	char *parent_path = "/";
+	const char *tail;
+
+	/* We do not want the trailing '/' character */
+	tail = kbasename(path) - 1;
+
+	/* reject if path is "/" */
+	if (!strcmp(path, "/"))
+		return ERR_PTR(-EINVAL);
+
+	if (tail > path) {
+		parent_path = kstrndup(path, tail - path, GFP_KERNEL);
+		if (!parent_path)
+			return ERR_PTR(-ENOMEM);
+	}
+	parent = of_find_node_by_path(parent_path);
+	if (strcmp(parent_path, "/"))
+		kfree(parent_path);
+	return parent ? parent : ERR_PTR(-EINVAL);
+}
diff --git a/arch/powerpc/platforms/pseries/of_helpers.h b/arch/powerpc/platforms/pseries/of_helpers.h
new file mode 100644
index 0000000..bb83d39
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/of_helpers.h
@@ -0,0 +1,8 @@
+#ifndef _PSERIES_OF_HELPERS_H
+#define _PSERIES_OF_HELPERS_H
+
+#include <linux/of.h>
+
+struct device_node *pseries_of_derive_parent(const char *path);
+
+#endif /* _PSERIES_OF_HELPERS_H */
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 0f31952..7c7fcc0 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -22,37 +22,7 @@
 #include <asm/uaccess.h>
 #include <asm/mmu.h>
 
-/**
- *	derive_parent - basically like dirname(1)
- *	@path:  the full_name of a node to be added to the tree
- *
- *	Returns the node which should be the parent of the node
- *	described by path.  E.g., for path = "/foo/bar", returns
- *	the node with full_name = "/foo".
- */
-static struct device_node *derive_parent(const char *path)
-{
-	struct device_node *parent = NULL;
-	char *parent_path = "/";
-	size_t parent_path_len = strrchr(path, '/') - path + 1;
-
-	/* reject if path is "/" */
-	if (!strcmp(path, "/"))
-		return ERR_PTR(-EINVAL);
-
-	if (strrchr(path, '/') != path) {
-		parent_path = kmalloc(parent_path_len, GFP_KERNEL);
-		if (!parent_path)
-			return ERR_PTR(-ENOMEM);
-		strlcpy(parent_path, path, parent_path_len);
-	}
-	parent = of_find_node_by_path(parent_path);
-	if (!parent)
-		return ERR_PTR(-EINVAL);
-	if (strcmp(parent_path, "/"))
-		kfree(parent_path);
-	return parent;
-}
+#include "of_helpers.h"
 
 static int pSeries_reconfig_add_node(const char *path, struct property *proplist)
 {
@@ -71,7 +41,7 @@ static int pSeries_reconfig_add_node(const char *path, struct property *proplist
 	of_node_set_flag(np, OF_DYNAMIC);
 	of_node_init(np);
 
-	np->parent = derive_parent(path);
+	np->parent = pseries_of_derive_parent(path);
 	if (IS_ERR(np->parent)) {
 		err = PTR_ERR(np->parent);
 		goto out_err;
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 9a83eb7..9e524c2 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -837,10 +837,6 @@ static int pSeries_pci_probe_mode(struct pci_bus *bus)
 	return PCI_PROBE_NORMAL;
 }
 
-#ifndef CONFIG_PCI
-void pSeries_final_fixup(void) { }
-#endif
-
 struct pci_controller_ops pseries_pci_controller_ops = {
 	.probe_mode		= pSeries_pci_probe_mode,
 };
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index e2ea519..e00a5ee 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -147,7 +147,8 @@ unsigned long cpm_muram_alloc(unsigned long size, unsigned long align)
 	spin_lock_irqsave(&cpm_muram_lock, flags);
 	cpm_muram_info.alignment = align;
 	start = rh_alloc(&cpm_muram_info, size, "commproc");
-	memset_io(cpm_muram_addr(start), 0, size);
+	if (!IS_ERR_VALUE(start))
+		memset_io(cpm_muram_addr(start), 0, size);
 	spin_unlock_irqrestore(&cpm_muram_lock, flags);
 
 	return start;
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 13b9bcf..610f472 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -179,6 +179,19 @@ static int setup_one_atmu(struct ccsr_pci __iomem *pci,
 	return i;
 }
 
+static bool is_kdump(void)
+{
+	struct device_node *node;
+
+	node = of_find_node_by_type(NULL, "memory");
+	if (!node) {
+		WARN_ON_ONCE(1);
+		return false;
+	}
+
+	return of_property_read_bool(node, "linux,usable-memory");
+}
+
 /* atmu setup for fsl pci/pcie controller */
 static void setup_pci_atmu(struct pci_controller *hose)
 {
@@ -192,6 +205,16 @@ static void setup_pci_atmu(struct pci_controller *hose)
 	const char *name = hose->dn->full_name;
 	const u64 *reg;
 	int len;
+	bool setup_inbound;
+
+	/*
+	 * If this is kdump, we don't want to trigger a bunch of PCI
+	 * errors by closing the window on in-flight DMA.
+	 *
+	 * We still run most of the function's logic so that things like
+	 * hose->dma_window_size still get set.
+	 */
+	setup_inbound = !is_kdump();
 
 	if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
 		if (in_be32(&pci->block_rev1) >= PCIE_IP_REV_2_2) {
@@ -204,8 +227,11 @@ static void setup_pci_atmu(struct pci_controller *hose)
 	/* Disable all windows (except powar0 since it's ignored) */
 	for(i = 1; i < 5; i++)
 		out_be32(&pci->pow[i].powar, 0);
-	for (i = start_idx; i < end_idx; i++)
-		out_be32(&pci->piw[i].piwar, 0);
+
+	if (setup_inbound) {
+		for (i = start_idx; i < end_idx; i++)
+			out_be32(&pci->piw[i].piwar, 0);
+	}
 
 	/* Setup outbound MEM window */
 	for(i = 0, j = 1; i < 3; i++) {
@@ -278,6 +304,7 @@ static void setup_pci_atmu(struct pci_controller *hose)
 
 	/* Setup inbound mem window */
 	mem = memblock_end_of_DRAM();
+	pr_info("%s: end of DRAM %llx\n", __func__, mem);
 
 	/*
 	 * The msi-address-64 property, if it exists, indicates the physical
@@ -320,12 +347,14 @@ static void setup_pci_atmu(struct pci_controller *hose)
 
 		piwar |= ((mem_log - 1) & PIWAR_SZ_MASK);
 
-		/* Setup inbound memory window */
-		out_be32(&pci->piw[win_idx].pitar,  0x00000000);
-		out_be32(&pci->piw[win_idx].piwbar, 0x00000000);
-		out_be32(&pci->piw[win_idx].piwar,  piwar);
-		win_idx--;
+		if (setup_inbound) {
+			/* Setup inbound memory window */
+			out_be32(&pci->piw[win_idx].pitar,  0x00000000);
+			out_be32(&pci->piw[win_idx].piwbar, 0x00000000);
+			out_be32(&pci->piw[win_idx].piwar,  piwar);
+		}
 
+		win_idx--;
 		hose->dma_window_base_cur = 0x00000000;
 		hose->dma_window_size = (resource_size_t)sz;
 
@@ -343,13 +372,15 @@ static void setup_pci_atmu(struct pci_controller *hose)
 
 			piwar = (piwar & ~PIWAR_SZ_MASK) | (mem_log - 1);
 
-			/* Setup inbound memory window */
-			out_be32(&pci->piw[win_idx].pitar,  0x00000000);
-			out_be32(&pci->piw[win_idx].piwbear,
-					pci64_dma_offset >> 44);
-			out_be32(&pci->piw[win_idx].piwbar,
-					pci64_dma_offset >> 12);
-			out_be32(&pci->piw[win_idx].piwar,  piwar);
+			if (setup_inbound) {
+				/* Setup inbound memory window */
+				out_be32(&pci->piw[win_idx].pitar,  0x00000000);
+				out_be32(&pci->piw[win_idx].piwbear,
+						pci64_dma_offset >> 44);
+				out_be32(&pci->piw[win_idx].piwbar,
+						pci64_dma_offset >> 12);
+				out_be32(&pci->piw[win_idx].piwar,  piwar);
+			}
 
 			/*
 			 * install our own dma_set_mask handler to fixup dma_ops
@@ -362,12 +393,15 @@ static void setup_pci_atmu(struct pci_controller *hose)
 	} else {
 		u64 paddr = 0;
 
-		/* Setup inbound memory window */
-		out_be32(&pci->piw[win_idx].pitar,  paddr >> 12);
-		out_be32(&pci->piw[win_idx].piwbar, paddr >> 12);
-		out_be32(&pci->piw[win_idx].piwar,  (piwar | (mem_log - 1)));
-		win_idx--;
+		if (setup_inbound) {
+			/* Setup inbound memory window */
+			out_be32(&pci->piw[win_idx].pitar,  paddr >> 12);
+			out_be32(&pci->piw[win_idx].piwbar, paddr >> 12);
+			out_be32(&pci->piw[win_idx].piwar,
+				 (piwar | (mem_log - 1)));
+		}
 
+		win_idx--;
 		paddr += 1ull << mem_log;
 		sz -= 1ull << mem_log;
 
@@ -375,11 +409,15 @@ static void setup_pci_atmu(struct pci_controller *hose)
 			mem_log = ilog2(sz);
 			piwar |= (mem_log - 1);
 
-			out_be32(&pci->piw[win_idx].pitar,  paddr >> 12);
-			out_be32(&pci->piw[win_idx].piwbar, paddr >> 12);
-			out_be32(&pci->piw[win_idx].piwar,  piwar);
-			win_idx--;
+			if (setup_inbound) {
+				out_be32(&pci->piw[win_idx].pitar,
+					 paddr >> 12);
+				out_be32(&pci->piw[win_idx].piwbar,
+					 paddr >> 12);
+				out_be32(&pci->piw[win_idx].piwar, piwar);
+			}
 
+			win_idx--;
 			paddr += 1ull << mem_log;
 		}
 
@@ -1002,7 +1040,7 @@ int fsl_pci_mcheck_exception(struct pt_regs *regs)
 			ret = probe_kernel_address((void *)regs->nip, inst);
 		}
 
-		if (mcheck_handle_load(regs, inst)) {
+		if (!ret && mcheck_handle_load(regs, inst)) {
 			regs->nip += 4;
 			return 1;
 		}
diff --git a/arch/powerpc/sysdev/mpc5xxx_clocks.c b/arch/powerpc/sysdev/mpc5xxx_clocks.c
index f4f0301..5732926 100644
--- a/arch/powerpc/sysdev/mpc5xxx_clocks.c
+++ b/arch/powerpc/sysdev/mpc5xxx_clocks.c
@@ -13,7 +13,6 @@
 
 unsigned long mpc5xxx_get_bus_frequency(struct device_node *node)
 {
-	struct device_node *np;
 	const unsigned int *p_bus_freq = NULL;
 
 	of_node_get(node);
@@ -22,9 +21,7 @@ unsigned long mpc5xxx_get_bus_frequency(struct device_node *node)
 		if (p_bus_freq)
 			break;
 
-		np = of_get_parent(node);
-		of_node_put(node);
-		node = np;
+		node = of_get_next_parent(node);
 	}
 	of_node_put(node);
 
diff --git a/arch/powerpc/sysdev/mpc8xx_pic.c b/arch/powerpc/sysdev/mpc8xx_pic.c
index 9a42397..b7cf7ab 100644
--- a/arch/powerpc/sysdev/mpc8xx_pic.c
+++ b/arch/powerpc/sysdev/mpc8xx_pic.c
@@ -61,7 +61,7 @@ static int mpc8xx_set_irq_type(struct irq_data *d, unsigned int flow_type)
 }
 
 static struct irq_chip mpc8xx_pic = {
-	.name = "MPC8XX SIU",
+	.name = "8XX SIU",
 	.irq_unmask = mpc8xx_unmask_irq,
 	.irq_mask = mpc8xx_mask_irq,
 	.irq_ack = mpc8xx_ack,
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index cecd115..2a0452e 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -924,22 +924,6 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type)
 	return IRQ_SET_MASK_OK_NOCOPY;
 }
 
-static int mpic_irq_set_wake(struct irq_data *d, unsigned int on)
-{
-	struct irq_desc *desc = container_of(d, struct irq_desc, irq_data);
-	struct mpic *mpic = mpic_from_irq_data(d);
-
-	if (!(mpic->flags & MPIC_FSL))
-		return -ENXIO;
-
-	if (on)
-		desc->action->flags |= IRQF_NO_SUSPEND;
-	else
-		desc->action->flags &= ~IRQF_NO_SUSPEND;
-
-	return 0;
-}
-
 void mpic_set_vector(unsigned int virq, unsigned int vector)
 {
 	struct mpic *mpic = mpic_from_irq(virq);
@@ -977,7 +961,6 @@ static struct irq_chip mpic_irq_chip = {
 	.irq_unmask	= mpic_unmask_irq,
 	.irq_eoi	= mpic_end_irq,
 	.irq_set_type	= mpic_set_irq_type,
-	.irq_set_wake	= mpic_irq_set_wake,
 };
 
 #ifdef CONFIG_SMP
@@ -992,7 +975,6 @@ static struct irq_chip mpic_tm_chip = {
 	.irq_mask	= mpic_mask_tm,
 	.irq_unmask	= mpic_unmask_tm,
 	.irq_eoi	= mpic_end_irq,
-	.irq_set_wake	= mpic_irq_set_wake,
 };
 
 #ifdef CONFIG_MPIC_U3_HT_IRQS
@@ -1284,8 +1266,11 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 		flags |= MPIC_NO_RESET;
 	if (of_get_property(node, "single-cpu-affinity", NULL))
 		flags |= MPIC_SINGLE_DEST_CPU;
-	if (of_device_is_compatible(node, "fsl,mpic"))
+	if (of_device_is_compatible(node, "fsl,mpic")) {
 		flags |= MPIC_FSL | MPIC_LARGE_VECTORS;
+		mpic_irq_chip.flags |= IRQCHIP_SKIP_SET_WAKE;
+		mpic_tm_chip.flags |= IRQCHIP_SKIP_SET_WAKE;
+	}
 
 	mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL);
 	if (mpic == NULL)
diff --git a/arch/powerpc/sysdev/msi_bitmap.c b/arch/powerpc/sysdev/msi_bitmap.c
index 73b64c7..ed5234e 100644
--- a/arch/powerpc/sysdev/msi_bitmap.c
+++ b/arch/powerpc/sysdev/msi_bitmap.c
@@ -11,6 +11,7 @@
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/bitmap.h>
+#include <linux/bootmem.h>
 #include <asm/msi_bitmap.h>
 #include <asm/setup.h>
 
@@ -111,7 +112,7 @@ int msi_bitmap_reserve_dt_hwirqs(struct msi_bitmap *bmp)
 	return 0;
 }
 
-int msi_bitmap_alloc(struct msi_bitmap *bmp, unsigned int irq_count,
+int __init_refok msi_bitmap_alloc(struct msi_bitmap *bmp, unsigned int irq_count,
 		     struct device_node *of_node)
 {
 	int size;
@@ -122,7 +123,15 @@ int msi_bitmap_alloc(struct msi_bitmap *bmp, unsigned int irq_count,
 	size = BITS_TO_LONGS(irq_count) * sizeof(long);
 	pr_debug("msi_bitmap: allocator bitmap size is 0x%x bytes\n", size);
 
-	bmp->bitmap = zalloc_maybe_bootmem(size, GFP_KERNEL);
+	bmp->bitmap_from_slab = slab_is_available();
+	if (bmp->bitmap_from_slab)
+		bmp->bitmap = kzalloc(size, GFP_KERNEL);
+	else {
+		bmp->bitmap = memblock_virt_alloc(size, 0);
+		/* the bitmap won't be freed from memblock allocator */
+		kmemleak_not_leak(bmp->bitmap);
+	}
+
 	if (!bmp->bitmap) {
 		pr_debug("msi_bitmap: ENOMEM allocating allocator bitmap!\n");
 		return -ENOMEM;
@@ -138,7 +147,8 @@ int msi_bitmap_alloc(struct msi_bitmap *bmp, unsigned int irq_count,
 
 void msi_bitmap_free(struct msi_bitmap *bmp)
 {
-	/* we can't free the bitmap we don't know if it's bootmem etc. */
+	if (bmp->bitmap_from_slab)
+		kfree(bmp->bitmap);
 	of_node_put(bmp->of_node);
 	bmp->bitmap = NULL;
 }
@@ -203,8 +213,6 @@ static void __init test_basics(void)
 
 	/* Clients may WARN_ON bitmap == NULL for "not-allocated" */
 	WARN_ON(bmp.bitmap != NULL);
-
-	kfree(bmp.bitmap);
 }
 
 static void __init test_of_node(void)
diff --git a/arch/powerpc/xmon/nonstdio.c b/arch/powerpc/xmon/nonstdio.c
index c987486..d001234 100644
--- a/arch/powerpc/xmon/nonstdio.c
+++ b/arch/powerpc/xmon/nonstdio.c
@@ -11,10 +11,25 @@
 #include <asm/time.h>
 #include "nonstdio.h"
 
+static bool paginating, paginate_skipping;
+static unsigned long paginate_lpp; /* Lines Per Page */
+static unsigned long paginate_pos;
 
-static int xmon_write(const void *ptr, int nb)
+void xmon_start_pagination(void)
 {
-	return udbg_write(ptr, nb);
+	paginating = true;
+	paginate_skipping = false;
+	paginate_pos = 0;
+}
+
+void xmon_end_pagination(void)
+{
+	paginating = false;
+}
+
+void xmon_set_pagination_lpp(unsigned long lpp)
+{
+	paginate_lpp = lpp;
 }
 
 static int xmon_readchar(void)
@@ -24,6 +39,51 @@ static int xmon_readchar(void)
 	return -1;
 }
 
+static int xmon_write(const char *ptr, int nb)
+{
+	int rv = 0;
+	const char *p = ptr, *q;
+	const char msg[] = "[Hit a key (a:all, q:truncate, any:next page)]";
+
+	if (nb <= 0)
+		return rv;
+
+	if (paginating && paginate_skipping)
+		return nb;
+
+	if (paginate_lpp) {
+		while (paginating && (q = strchr(p, '\n'))) {
+			rv += udbg_write(p, q - p + 1);
+			p = q + 1;
+			paginate_pos++;
+
+			if (paginate_pos >= paginate_lpp) {
+				udbg_write(msg, strlen(msg));
+
+				switch (xmon_readchar()) {
+				case 'a':
+					paginating = false;
+					break;
+				case 'q':
+					paginate_skipping = true;
+					break;
+				default:
+					/* nothing */
+					break;
+				}
+
+				paginate_pos = 0;
+				udbg_write("\r\n", 2);
+
+				if (paginate_skipping)
+					return nb;
+			}
+		}
+	}
+
+	return rv + udbg_write(p, nb - (p - ptr));
+}
+
 int xmon_putchar(int c)
 {
 	char ch = c;
diff --git a/arch/powerpc/xmon/nonstdio.h b/arch/powerpc/xmon/nonstdio.h
index 18a51de..f865336 100644
--- a/arch/powerpc/xmon/nonstdio.h
+++ b/arch/powerpc/xmon/nonstdio.h
@@ -3,6 +3,9 @@
 #define printf	xmon_printf
 #define putchar	xmon_putchar
 
+extern void xmon_set_pagination_lpp(unsigned long lpp);
+extern void xmon_start_pagination(void);
+extern void xmon_end_pagination(void);
 extern int xmon_putchar(int c);
 extern void xmon_puts(const char *);
 extern char *xmon_gets(char *, int);
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 6ef1231..786bf01 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -242,6 +242,7 @@ Commands:\n\
 "  u	dump TLB\n"
 #endif
 "  ?	help\n"
+"  # n	limit output to n lines per page (for dp, dpa, dl)\n"
 "  zr	reboot\n\
   zh	halt\n"
 ;
@@ -833,6 +834,16 @@ static void remove_cpu_bpts(void)
 	write_ciabr(0);
 }
 
+static void set_lpp_cmd(void)
+{
+	unsigned long lpp;
+
+	if (!scanhex(&lpp)) {
+		printf("Invalid number.\n");
+		lpp = 0;
+	}
+	xmon_set_pagination_lpp(lpp);
+}
 /* Command interpreting routine */
 static char *last_cmd;
 
@@ -924,6 +935,9 @@ cmds(struct pt_regs *excp)
 		case '?':
 			xmon_puts(help_string);
 			break;
+		case '#':
+			set_lpp_cmd();
+			break;
 		case 'b':
 			bpt_cmds();
 			break;
@@ -2072,6 +2086,9 @@ static void xmon_rawdump (unsigned long adrs, long ndump)
 static void dump_one_paca(int cpu)
 {
 	struct paca_struct *p;
+#ifdef CONFIG_PPC_STD_MMU_64
+	int i = 0;
+#endif
 
 	if (setjmp(bus_error_jmp) != 0) {
 		printf("*** Error dumping paca for cpu 0x%x!\n", cpu);
@@ -2085,12 +2102,12 @@ static void dump_one_paca(int cpu)
 
 	printf("paca for cpu 0x%x @ %p:\n", cpu, p);
 
-	printf(" %-*s = %s\n", 16, "possible", cpu_possible(cpu) ? "yes" : "no");
-	printf(" %-*s = %s\n", 16, "present", cpu_present(cpu) ? "yes" : "no");
-	printf(" %-*s = %s\n", 16, "online", cpu_online(cpu) ? "yes" : "no");
+	printf(" %-*s = %s\n", 20, "possible", cpu_possible(cpu) ? "yes" : "no");
+	printf(" %-*s = %s\n", 20, "present", cpu_present(cpu) ? "yes" : "no");
+	printf(" %-*s = %s\n", 20, "online", cpu_online(cpu) ? "yes" : "no");
 
 #define DUMP(paca, name, format) \
-	printf(" %-*s = %#-*"format"\t(0x%lx)\n", 16, #name, 18, paca->name, \
+	printf(" %-*s = %#-*"format"\t(0x%lx)\n", 20, #name, 18, paca->name, \
 		offsetof(struct paca_struct, name));
 
 	DUMP(p, lock_token, "x");
@@ -2102,11 +2119,41 @@ static void dump_one_paca(int cpu)
 #ifdef CONFIG_PPC_BOOK3S_64
 	DUMP(p, mc_emergency_sp, "p");
 	DUMP(p, in_mce, "x");
+	DUMP(p, hmi_event_available, "x");
 #endif
 	DUMP(p, data_offset, "lx");
 	DUMP(p, hw_cpu_id, "x");
 	DUMP(p, cpu_start, "x");
 	DUMP(p, kexec_state, "x");
+#ifdef CONFIG_PPC_STD_MMU_64
+	for (i = 0; i < SLB_NUM_BOLTED; i++) {
+		u64 esid, vsid;
+
+		if (!p->slb_shadow_ptr)
+			continue;
+
+		esid = be64_to_cpu(p->slb_shadow_ptr->save_area[i].esid);
+		vsid = be64_to_cpu(p->slb_shadow_ptr->save_area[i].vsid);
+
+		if (esid || vsid) {
+			printf(" slb_shadow[%d]:       = 0x%016lx 0x%016lx\n",
+				i, esid, vsid);
+		}
+	}
+	DUMP(p, vmalloc_sllp, "x");
+	DUMP(p, slb_cache_ptr, "x");
+	for (i = 0; i < SLB_CACHE_ENTRIES; i++)
+		printf(" slb_cache[%d]:        = 0x%016lx\n", i, p->slb_cache[i]);
+#endif
+	DUMP(p, dscr_default, "llx");
+#ifdef CONFIG_PPC_BOOK3E
+	DUMP(p, pgd, "p");
+	DUMP(p, kernel_pgd, "p");
+	DUMP(p, tcd_ptr, "p");
+	DUMP(p, mc_kstack, "p");
+	DUMP(p, crit_kstack, "p");
+	DUMP(p, dbg_kstack, "p");
+#endif
 	DUMP(p, __current, "p");
 	DUMP(p, kstack, "lx");
 	DUMP(p, stab_rr, "lx");
@@ -2117,7 +2164,27 @@ static void dump_one_paca(int cpu)
 	DUMP(p, io_sync, "x");
 	DUMP(p, irq_work_pending, "x");
 	DUMP(p, nap_state_lost, "x");
+	DUMP(p, sprg_vdso, "llx");
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	DUMP(p, tm_scratch, "llx");
+#endif
+
+#ifdef CONFIG_PPC_POWERNV
+	DUMP(p, core_idle_state_ptr, "p");
+	DUMP(p, thread_idle_state, "x");
+	DUMP(p, thread_mask, "x");
+	DUMP(p, subcore_sibling_mask, "x");
+#endif
 
+	DUMP(p, user_time, "llx");
+	DUMP(p, system_time, "llx");
+	DUMP(p, user_time_scaled, "llx");
+	DUMP(p, starttime, "llx");
+	DUMP(p, starttime_user, "llx");
+	DUMP(p, startspurr, "llx");
+	DUMP(p, utime_sspurr, "llx");
+	DUMP(p, stolen_time, "llx");
 #undef DUMP
 
 	catch_memory_errors = 0;
@@ -2166,7 +2233,9 @@ dump(void)
 
 #ifdef CONFIG_PPC64
 	if (c == 'p') {
+		xmon_start_pagination();
 		dump_pacas();
+		xmon_end_pagination();
 		return;
 	}
 #endif
@@ -2315,10 +2384,12 @@ dump_log_buf(void)
 	sync();
 
 	kmsg_dump_rewind_nolock(&dumper);
+	xmon_start_pagination();
 	while (kmsg_dump_get_line_nolock(&dumper, false, buf, sizeof(buf), &len)) {
 		buf[len] = '\0';
 		printf("%s", buf);
 	}
+	xmon_end_pagination();
 
 	sync();
 	/* wait a little while to see if we get a machine check */
diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c
index a56ee9b..0575544 100644
--- a/drivers/char/agp/uninorth-agp.c
+++ b/drivers/char/agp/uninorth-agp.c
@@ -361,6 +361,10 @@ static int agp_uninorth_resume(struct pci_dev *pdev)
 }
 #endif /* CONFIG_PM */
 
+static struct {
+	struct page **pages_arr;
+} uninorth_priv;
+
 static int uninorth_create_gatt_table(struct agp_bridge_data *bridge)
 {
 	char *table;
@@ -371,7 +375,6 @@ static int uninorth_create_gatt_table(struct agp_bridge_data *bridge)
 	int i;
 	void *temp;
 	struct page *page;
-	struct page **pages;
 
 	/* We can't handle 2 level gatt's */
 	if (bridge->driver->size_type == LVL2_APER_SIZE)
@@ -400,8 +403,8 @@ static int uninorth_create_gatt_table(struct agp_bridge_data *bridge)
 	if (table == NULL)
 		return -ENOMEM;
 
-	pages = kmalloc((1 << page_order) * sizeof(struct page*), GFP_KERNEL);
-	if (pages == NULL)
+	uninorth_priv.pages_arr = kmalloc((1 << page_order) * sizeof(struct page*), GFP_KERNEL);
+	if (uninorth_priv.pages_arr == NULL)
 		goto enomem;
 
 	table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1);
@@ -409,14 +412,14 @@ static int uninorth_create_gatt_table(struct agp_bridge_data *bridge)
 	for (page = virt_to_page(table), i = 0; page <= virt_to_page(table_end);
 	     page++, i++) {
 		SetPageReserved(page);
-		pages[i] = page;
+		uninorth_priv.pages_arr[i] = page;
 	}
 
 	bridge->gatt_table_real = (u32 *) table;
 	/* Need to clear out any dirty data still sitting in caches */
 	flush_dcache_range((unsigned long)table,
 			   (unsigned long)table_end + 1);
-	bridge->gatt_table = vmap(pages, (1 << page_order), 0, PAGE_KERNEL_NCG);
+	bridge->gatt_table = vmap(uninorth_priv.pages_arr, (1 << page_order), 0, PAGE_KERNEL_NCG);
 
 	if (bridge->gatt_table == NULL)
 		goto enomem;
@@ -434,7 +437,7 @@ static int uninorth_create_gatt_table(struct agp_bridge_data *bridge)
 	return 0;
 
 enomem:
-	kfree(pages);
+	kfree(uninorth_priv.pages_arr);
 	if (table)
 		free_pages((unsigned long)table, page_order);
 	return -ENOMEM;
@@ -456,6 +459,7 @@ static int uninorth_free_gatt_table(struct agp_bridge_data *bridge)
 	 */
 
 	vunmap(bridge->gatt_table);
+	kfree(uninorth_priv.pages_arr);
 	table = (char *) bridge->gatt_table_real;
 	table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1);
 
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 5731652..7a1ab24 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -132,7 +132,7 @@ config COMMON_CLK_AXI_CLKGEN
 
 config CLK_QORIQ
 	bool "Clock driver for Freescale QorIQ platforms"
-	depends on (PPC_E500MC || ARM || COMPILE_TEST) && OF
+	depends on (PPC_E500MC || ARM || ARM64 || COMPILE_TEST) && OF
 	---help---
 	  This adds the clock driver support for Freescale QorIQ platforms
 	  using common clock framework.
diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index cda90a9..1ab0fb8 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -10,7 +10,9 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
+#include <linux/fsl/guts.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -19,213 +21,1029 @@
 #include <linux/of.h>
 #include <linux/slab.h>
 
-struct cmux_clk {
+#define PLL_DIV1	0
+#define PLL_DIV2	1
+#define PLL_DIV3	2
+#define PLL_DIV4	3
+
+#define PLATFORM_PLL	0
+#define CGA_PLL1	1
+#define CGA_PLL2	2
+#define CGA_PLL3	3
+#define CGA_PLL4	4	/* only on clockgen-1.0, which lacks CGB */
+#define CGB_PLL1	4
+#define CGB_PLL2	5
+
+struct clockgen_pll_div {
+	struct clk *clk;
+	char name[32];
+};
+
+struct clockgen_pll {
+	struct clockgen_pll_div div[4];
+};
+
+#define CLKSEL_VALID	1
+#define CLKSEL_80PCT	2	/* Only allowed if PLL <= 80% of max cpu freq */
+
+struct clockgen_sourceinfo {
+	u32 flags;	/* CLKSEL_xxx */
+	int pll;	/* CGx_PLLn */
+	int div;	/* PLL_DIVn */
+};
+
+#define NUM_MUX_PARENTS	16
+
+struct clockgen_muxinfo {
+	struct clockgen_sourceinfo clksel[NUM_MUX_PARENTS];
+};
+
+#define NUM_HWACCEL	5
+#define NUM_CMUX	8
+
+struct clockgen;
+
+/*
+ * cmux freq must be >= platform pll.
+ * If not set, cmux freq must be >= platform pll/2
+ */
+#define CG_CMUX_GE_PLAT		1
+
+#define CG_PLL_8BIT		2	/* PLLCnGSR[CFG] is 8 bits, not 6 */
+#define CG_VER3			4	/* version 3 cg: reg layout different */
+#define CG_LITTLE_ENDIAN	8
+
+struct clockgen_chipinfo {
+	const char *compat, *guts_compat;
+	const struct clockgen_muxinfo *cmux_groups[2];
+	const struct clockgen_muxinfo *hwaccel[NUM_HWACCEL];
+	void (*init_periph)(struct clockgen *cg);
+	int cmux_to_group[NUM_CMUX]; /* -1 terminates if fewer than NUM_CMUX */
+	u32 pll_mask;	/* 1 << n bit set if PLL n is valid */
+	u32 flags;	/* CG_xxx */
+};
+
+struct clockgen {
+	struct device_node *node;
+	void __iomem *regs;
+	struct clockgen_chipinfo info; /* mutable copy */
+	struct clk *sysclk;
+	struct clockgen_pll pll[6];
+	struct clk *cmux[NUM_CMUX];
+	struct clk *hwaccel[NUM_HWACCEL];
+	struct clk *fman[2];
+	struct ccsr_guts __iomem *guts;
+};
+
+static struct clockgen clockgen;
+
+static void cg_out(struct clockgen *cg, u32 val, u32 __iomem *reg)
+{
+	if (cg->info.flags & CG_LITTLE_ENDIAN)
+		iowrite32(val, reg);
+	else
+		iowrite32be(val, reg);
+}
+
+static u32 cg_in(struct clockgen *cg, u32 __iomem *reg)
+{
+	u32 val;
+
+	if (cg->info.flags & CG_LITTLE_ENDIAN)
+		val = ioread32(reg);
+	else
+		val = ioread32be(reg);
+
+	return val;
+}
+
+static const struct clockgen_muxinfo p2041_cmux_grp1 = {
+	{
+		[0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		[1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		[4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+	}
+};
+
+static const struct clockgen_muxinfo p2041_cmux_grp2 = {
+	{
+		[0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		[4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+		[5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+	}
+};
+
+static const struct clockgen_muxinfo p5020_cmux_grp1 = {
+	{
+		[0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		[1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		[4] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL2, PLL_DIV1 },
+	}
+};
+
+static const struct clockgen_muxinfo p5020_cmux_grp2 = {
+	{
+		[0] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL1, PLL_DIV1 },
+		[4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+		[5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+	}
+};
+
+static const struct clockgen_muxinfo p5040_cmux_grp1 = {
+	{
+		[0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		[1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		[4] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL2, PLL_DIV1 },
+		[5] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL2, PLL_DIV2 },
+	}
+};
+
+static const struct clockgen_muxinfo p5040_cmux_grp2 = {
+	{
+		[0] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL1, PLL_DIV1 },
+		[1] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL1, PLL_DIV2 },
+		[4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+		[5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+	}
+};
+
+static const struct clockgen_muxinfo p4080_cmux_grp1 = {
+	{
+		[0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		[1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		[4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+		[5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+		[8] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL3, PLL_DIV1 },
+	}
+};
+
+static const struct clockgen_muxinfo p4080_cmux_grp2 = {
+	{
+		[0] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL1, PLL_DIV1 },
+		[8] = { CLKSEL_VALID, CGA_PLL3, PLL_DIV1 },
+		[9] = { CLKSEL_VALID, CGA_PLL3, PLL_DIV2 },
+		[12] = { CLKSEL_VALID, CGA_PLL4, PLL_DIV1 },
+		[13] = { CLKSEL_VALID, CGA_PLL4, PLL_DIV2 },
+	}
+};
+
+static const struct clockgen_muxinfo t1023_cmux = {
+	{
+		[0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		[1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+	}
+};
+
+static const struct clockgen_muxinfo t1040_cmux = {
+	{
+		[0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		[1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		[4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+		[5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+	}
+};
+
+
+static const struct clockgen_muxinfo clockgen2_cmux_cga = {
+	{
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV4 },
+		{},
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV4 },
+		{},
+		{ CLKSEL_VALID, CGA_PLL3, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL3, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL3, PLL_DIV4 },
+	},
+};
+
+static const struct clockgen_muxinfo clockgen2_cmux_cga12 = {
+	{
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV4 },
+		{},
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV4 },
+	},
+};
+
+static const struct clockgen_muxinfo clockgen2_cmux_cgb = {
+	{
+		{ CLKSEL_VALID, CGB_PLL1, PLL_DIV1 },
+		{ CLKSEL_VALID, CGB_PLL1, PLL_DIV2 },
+		{ CLKSEL_VALID, CGB_PLL1, PLL_DIV4 },
+		{},
+		{ CLKSEL_VALID, CGB_PLL2, PLL_DIV1 },
+		{ CLKSEL_VALID, CGB_PLL2, PLL_DIV2 },
+		{ CLKSEL_VALID, CGB_PLL2, PLL_DIV4 },
+	},
+};
+
+static const struct clockgen_muxinfo ls1043a_hwa1 = {
+	{
+		{},
+		{},
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV3 },
+		{},
+		{},
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
+	},
+};
+
+static const struct clockgen_muxinfo ls1043a_hwa2 = {
+	{
+		{},
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+		{},
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
+	},
+};
+
+static const struct clockgen_muxinfo t1023_hwa1 = {
+	{
+		{},
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV3 },
+	},
+};
+
+static const struct clockgen_muxinfo t1023_hwa2 = {
+	{
+		[6] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+	},
+};
+
+static const struct clockgen_muxinfo t2080_hwa1 = {
+	{
+		{},
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV3 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV4 },
+		{ CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
+	},
+};
+
+static const struct clockgen_muxinfo t2080_hwa2 = {
+	{
+		{},
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV4 },
+		{ CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV3 },
+	},
+};
+
+static const struct clockgen_muxinfo t4240_hwa1 = {
+	{
+		{ CLKSEL_VALID, PLATFORM_PLL, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV3 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV4 },
+		{},
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
+	},
+};
+
+static const struct clockgen_muxinfo t4240_hwa4 = {
+	{
+		[2] = { CLKSEL_VALID, CGB_PLL1, PLL_DIV2 },
+		[3] = { CLKSEL_VALID, CGB_PLL1, PLL_DIV3 },
+		[4] = { CLKSEL_VALID, CGB_PLL1, PLL_DIV4 },
+		[5] = { CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 },
+		[6] = { CLKSEL_VALID, CGB_PLL2, PLL_DIV2 },
+	},
+};
+
+static const struct clockgen_muxinfo t4240_hwa5 = {
+	{
+		[2] = { CLKSEL_VALID, CGB_PLL2, PLL_DIV2 },
+		[3] = { CLKSEL_VALID, CGB_PLL2, PLL_DIV3 },
+		[4] = { CLKSEL_VALID, CGB_PLL2, PLL_DIV4 },
+		[5] = { CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 },
+		[6] = { CLKSEL_VALID, CGB_PLL1, PLL_DIV2 },
+		[7] = { CLKSEL_VALID, CGB_PLL1, PLL_DIV3 },
+	},
+};
+
+#define RCWSR7_FM1_CLK_SEL	0x40000000
+#define RCWSR7_FM2_CLK_SEL	0x20000000
+#define RCWSR7_HWA_ASYNC_DIV	0x04000000
+
+static void __init p2041_init_periph(struct clockgen *cg)
+{
+	u32 reg;
+
+	reg = ioread32be(&cg->guts->rcwsr[7]);
+
+	if (reg & RCWSR7_FM1_CLK_SEL)
+		cg->fman[0] = cg->pll[CGA_PLL2].div[PLL_DIV2].clk;
+	else
+		cg->fman[0] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk;
+}
+
+static void __init p4080_init_periph(struct clockgen *cg)
+{
+	u32 reg;
+
+	reg = ioread32be(&cg->guts->rcwsr[7]);
+
+	if (reg & RCWSR7_FM1_CLK_SEL)
+		cg->fman[0] = cg->pll[CGA_PLL3].div[PLL_DIV2].clk;
+	else
+		cg->fman[0] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk;
+
+	if (reg & RCWSR7_FM2_CLK_SEL)
+		cg->fman[1] = cg->pll[CGA_PLL3].div[PLL_DIV2].clk;
+	else
+		cg->fman[1] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk;
+}
+
+static void __init p5020_init_periph(struct clockgen *cg)
+{
+	u32 reg;
+	int div = PLL_DIV2;
+
+	reg = ioread32be(&cg->guts->rcwsr[7]);
+	if (reg & RCWSR7_HWA_ASYNC_DIV)
+		div = PLL_DIV4;
+
+	if (reg & RCWSR7_FM1_CLK_SEL)
+		cg->fman[0] = cg->pll[CGA_PLL2].div[div].clk;
+	else
+		cg->fman[0] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk;
+}
+
+static void __init p5040_init_periph(struct clockgen *cg)
+{
+	u32 reg;
+	int div = PLL_DIV2;
+
+	reg = ioread32be(&cg->guts->rcwsr[7]);
+	if (reg & RCWSR7_HWA_ASYNC_DIV)
+		div = PLL_DIV4;
+
+	if (reg & RCWSR7_FM1_CLK_SEL)
+		cg->fman[0] = cg->pll[CGA_PLL3].div[div].clk;
+	else
+		cg->fman[0] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk;
+
+	if (reg & RCWSR7_FM2_CLK_SEL)
+		cg->fman[1] = cg->pll[CGA_PLL3].div[div].clk;
+	else
+		cg->fman[1] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk;
+}
+
+static void __init t1023_init_periph(struct clockgen *cg)
+{
+	cg->fman[0] = cg->hwaccel[1];
+}
+
+static void __init t1040_init_periph(struct clockgen *cg)
+{
+	cg->fman[0] = cg->pll[PLATFORM_PLL].div[PLL_DIV1].clk;
+}
+
+static void __init t2080_init_periph(struct clockgen *cg)
+{
+	cg->fman[0] = cg->hwaccel[0];
+}
+
+static void __init t4240_init_periph(struct clockgen *cg)
+{
+	cg->fman[0] = cg->hwaccel[3];
+	cg->fman[1] = cg->hwaccel[4];
+}
+
+static const struct clockgen_chipinfo chipinfo[] = {
+	{
+		.compat = "fsl,b4420-clockgen",
+		.guts_compat = "fsl,b4860-device-config",
+		.init_periph = t2080_init_periph,
+		.cmux_groups = {
+			&clockgen2_cmux_cga12, &clockgen2_cmux_cgb
+		},
+		.hwaccel = {
+			&t2080_hwa1
+		},
+		.cmux_to_group = {
+			0, 1, 1, 1, -1
+		},
+		.pll_mask = 0x3f,
+		.flags = CG_PLL_8BIT,
+	},
+	{
+		.compat = "fsl,b4860-clockgen",
+		.guts_compat = "fsl,b4860-device-config",
+		.init_periph = t2080_init_periph,
+		.cmux_groups = {
+			&clockgen2_cmux_cga12, &clockgen2_cmux_cgb
+		},
+		.hwaccel = {
+			&t2080_hwa1
+		},
+		.cmux_to_group = {
+			0, 1, 1, 1, -1
+		},
+		.pll_mask = 0x3f,
+		.flags = CG_PLL_8BIT,
+	},
+	{
+		.compat = "fsl,ls1021a-clockgen",
+		.cmux_groups = {
+			&t1023_cmux
+		},
+		.cmux_to_group = {
+			0, -1
+		},
+		.pll_mask = 0x03,
+	},
+	{
+		.compat = "fsl,ls1043a-clockgen",
+		.init_periph = t2080_init_periph,
+		.cmux_groups = {
+			&t1040_cmux
+		},
+		.hwaccel = {
+			&ls1043a_hwa1, &ls1043a_hwa2
+		},
+		.cmux_to_group = {
+			0, -1
+		},
+		.pll_mask = 0x07,
+		.flags = CG_PLL_8BIT,
+	},
+	{
+		.compat = "fsl,ls2080a-clockgen",
+		.cmux_groups = {
+			&clockgen2_cmux_cga12, &clockgen2_cmux_cgb
+		},
+		.cmux_to_group = {
+			0, 0, 1, 1, -1
+		},
+		.pll_mask = 0x37,
+		.flags = CG_VER3 | CG_LITTLE_ENDIAN,
+	},
+	{
+		.compat = "fsl,p2041-clockgen",
+		.guts_compat = "fsl,qoriq-device-config-1.0",
+		.init_periph = p2041_init_periph,
+		.cmux_groups = {
+			&p2041_cmux_grp1, &p2041_cmux_grp2
+		},
+		.cmux_to_group = {
+			0, 0, 1, 1, -1
+		},
+		.pll_mask = 0x07,
+	},
+	{
+		.compat = "fsl,p3041-clockgen",
+		.guts_compat = "fsl,qoriq-device-config-1.0",
+		.init_periph = p2041_init_periph,
+		.cmux_groups = {
+			&p2041_cmux_grp1, &p2041_cmux_grp2
+		},
+		.cmux_to_group = {
+			0, 0, 1, 1, -1
+		},
+		.pll_mask = 0x07,
+	},
+	{
+		.compat = "fsl,p4080-clockgen",
+		.guts_compat = "fsl,qoriq-device-config-1.0",
+		.init_periph = p4080_init_periph,
+		.cmux_groups = {
+			&p4080_cmux_grp1, &p4080_cmux_grp2
+		},
+		.cmux_to_group = {
+			0, 0, 0, 0, 1, 1, 1, 1
+		},
+		.pll_mask = 0x1f,
+	},
+	{
+		.compat = "fsl,p5020-clockgen",
+		.guts_compat = "fsl,qoriq-device-config-1.0",
+		.init_periph = p5020_init_periph,
+		.cmux_groups = {
+			&p2041_cmux_grp1, &p2041_cmux_grp2
+		},
+		.cmux_to_group = {
+			0, 1, -1
+		},
+		.pll_mask = 0x07,
+	},
+	{
+		.compat = "fsl,p5040-clockgen",
+		.guts_compat = "fsl,p5040-device-config",
+		.init_periph = p5040_init_periph,
+		.cmux_groups = {
+			&p5040_cmux_grp1, &p5040_cmux_grp2
+		},
+		.cmux_to_group = {
+			0, 0, 1, 1, -1
+		},
+		.pll_mask = 0x0f,
+	},
+	{
+		.compat = "fsl,t1023-clockgen",
+		.guts_compat = "fsl,t1023-device-config",
+		.init_periph = t1023_init_periph,
+		.cmux_groups = {
+			&t1023_cmux
+		},
+		.hwaccel = {
+			&t1023_hwa1, &t1023_hwa2
+		},
+		.cmux_to_group = {
+			0, 0, -1
+		},
+		.pll_mask = 0x03,
+		.flags = CG_PLL_8BIT,
+	},
+	{
+		.compat = "fsl,t1040-clockgen",
+		.guts_compat = "fsl,t1040-device-config",
+		.init_periph = t1040_init_periph,
+		.cmux_groups = {
+			&t1040_cmux
+		},
+		.cmux_to_group = {
+			0, 0, 0, 0, -1
+		},
+		.pll_mask = 0x07,
+		.flags = CG_PLL_8BIT,
+	},
+	{
+		.compat = "fsl,t2080-clockgen",
+		.guts_compat = "fsl,t2080-device-config",
+		.init_periph = t2080_init_periph,
+		.cmux_groups = {
+			&clockgen2_cmux_cga12
+		},
+		.hwaccel = {
+			&t2080_hwa1, &t2080_hwa2
+		},
+		.cmux_to_group = {
+			0, -1
+		},
+		.pll_mask = 0x07,
+		.flags = CG_PLL_8BIT,
+	},
+	{
+		.compat = "fsl,t4240-clockgen",
+		.guts_compat = "fsl,t4240-device-config",
+		.init_periph = t4240_init_periph,
+		.cmux_groups = {
+			&clockgen2_cmux_cga, &clockgen2_cmux_cgb
+		},
+		.hwaccel = {
+			&t4240_hwa1, NULL, NULL, &t4240_hwa4, &t4240_hwa5
+		},
+		.cmux_to_group = {
+			0, 0, 1, -1
+		},
+		.pll_mask = 0x3f,
+		.flags = CG_PLL_8BIT,
+	},
+	{},
+};
+
+struct mux_hwclock {
 	struct clk_hw hw;
-	void __iomem *reg;
-	unsigned int clk_per_pll;
-	u32 flags;
+	struct clockgen *cg;
+	const struct clockgen_muxinfo *info;
+	u32 __iomem *reg;
+	u8 parent_to_clksel[NUM_MUX_PARENTS];
+	s8 clksel_to_parent[NUM_MUX_PARENTS];
+	int num_parents;
 };
 
-#define PLL_KILL			BIT(31)
+#define to_mux_hwclock(p)	container_of(p, struct mux_hwclock, hw)
+#define CLKSEL_MASK		0x78000000
 #define	CLKSEL_SHIFT		27
-#define CLKSEL_ADJUST		BIT(0)
-#define to_cmux_clk(p)		container_of(p, struct cmux_clk, hw)
 
-static int cmux_set_parent(struct clk_hw *hw, u8 idx)
+static int mux_set_parent(struct clk_hw *hw, u8 idx)
 {
-	struct cmux_clk *clk = to_cmux_clk(hw);
+	struct mux_hwclock *hwc = to_mux_hwclock(hw);
 	u32 clksel;
 
-	clksel = ((idx / clk->clk_per_pll) << 2) + idx % clk->clk_per_pll;
-	if (clk->flags & CLKSEL_ADJUST)
-		clksel += 8;
-	clksel = (clksel & 0xf) << CLKSEL_SHIFT;
-	iowrite32be(clksel, clk->reg);
+	if (idx >= hwc->num_parents)
+		return -EINVAL;
+
+	clksel = hwc->parent_to_clksel[idx];
+	cg_out(hwc->cg, (clksel << CLKSEL_SHIFT) & CLKSEL_MASK, hwc->reg);
 
 	return 0;
 }
 
-static u8 cmux_get_parent(struct clk_hw *hw)
+static u8 mux_get_parent(struct clk_hw *hw)
 {
-	struct cmux_clk *clk = to_cmux_clk(hw);
+	struct mux_hwclock *hwc = to_mux_hwclock(hw);
 	u32 clksel;
+	s8 ret;
 
-	clksel = ioread32be(clk->reg);
-	clksel = (clksel >> CLKSEL_SHIFT) & 0xf;
-	if (clk->flags & CLKSEL_ADJUST)
-		clksel -= 8;
-	clksel = (clksel >> 2) * clk->clk_per_pll + clksel % 4;
+	clksel = (cg_in(hwc->cg, hwc->reg) & CLKSEL_MASK) >> CLKSEL_SHIFT;
 
-	return clksel;
+	ret = hwc->clksel_to_parent[clksel];
+	if (ret < 0) {
+		pr_err("%s: mux at %p has bad clksel\n", __func__, hwc->reg);
+		return 0;
+	}
+
+	return ret;
 }
 
 static const struct clk_ops cmux_ops = {
-	.get_parent = cmux_get_parent,
-	.set_parent = cmux_set_parent,
+	.get_parent = mux_get_parent,
+	.set_parent = mux_set_parent,
 };
 
-static void __init core_mux_init(struct device_node *np)
+/*
+ * Don't allow setting for now, as the clock options haven't been
+ * sanitized for additional restrictions.
+ */
+static const struct clk_ops hwaccel_ops = {
+	.get_parent = mux_get_parent,
+};
+
+static const struct clockgen_pll_div *get_pll_div(struct clockgen *cg,
+						  struct mux_hwclock *hwc,
+						  int idx)
 {
-	struct clk *clk;
-	struct clk_init_data init;
-	struct cmux_clk *cmux_clk;
-	struct device_node *node;
-	int rc, count, i;
-	u32	offset;
-	const char *clk_name;
-	const char **parent_names;
-	struct of_phandle_args clkspec;
+	int pll, div;
 
-	rc = of_property_read_u32(np, "reg", &offset);
-	if (rc) {
-		pr_err("%s: could not get reg property\n", np->name);
-		return;
-	}
+	if (!(hwc->info->clksel[idx].flags & CLKSEL_VALID))
+		return NULL;
 
-	/* get the input clock source count */
-	count = of_property_count_strings(np, "clock-names");
-	if (count < 0) {
-		pr_err("%s: get clock count error\n", np->name);
-		return;
-	}
-	parent_names = kcalloc(count, sizeof(char *), GFP_KERNEL);
-	if (!parent_names)
-		return;
+	pll = hwc->info->clksel[idx].pll;
+	div = hwc->info->clksel[idx].div;
 
-	for (i = 0; i < count; i++)
-		parent_names[i] = of_clk_get_parent_name(np, i);
+	return &cg->pll[pll].div[div];
+}
 
-	cmux_clk = kzalloc(sizeof(*cmux_clk), GFP_KERNEL);
-	if (!cmux_clk)
-		goto err_name;
+static struct clk * __init create_mux_common(struct clockgen *cg,
+					     struct mux_hwclock *hwc,
+					     const struct clk_ops *ops,
+					     unsigned long min_rate,
+					     unsigned long pct80_rate,
+					     const char *fmt, int idx)
+{
+	struct clk_init_data init = {};
+	struct clk *clk;
+	const struct clockgen_pll_div *div;
+	const char *parent_names[NUM_MUX_PARENTS];
+	char name[32];
+	int i, j;
 
-	cmux_clk->reg = of_iomap(np, 0);
-	if (!cmux_clk->reg) {
-		pr_err("%s: could not map register\n", __func__);
-		goto err_clk;
-	}
+	snprintf(name, sizeof(name), fmt, idx);
 
-	rc = of_parse_phandle_with_args(np, "clocks", "#clock-cells", 0,
-					&clkspec);
-	if (rc) {
-		pr_err("%s: parse clock node error\n", __func__);
-		goto err_clk;
-	}
+	for (i = 0, j = 0; i < NUM_MUX_PARENTS; i++) {
+		unsigned long rate;
 
-	cmux_clk->clk_per_pll = of_property_count_strings(clkspec.np,
-			"clock-output-names");
-	of_node_put(clkspec.np);
+		hwc->clksel_to_parent[i] = -1;
 
-	node = of_find_compatible_node(NULL, NULL, "fsl,p4080-clockgen");
-	if (node && (offset >= 0x80))
-		cmux_clk->flags = CLKSEL_ADJUST;
+		div = get_pll_div(cg, hwc, i);
+		if (!div)
+			continue;
 
-	rc = of_property_read_string_index(np, "clock-output-names",
-					   0, &clk_name);
-	if (rc) {
-		pr_err("%s: read clock names error\n", np->name);
-		goto err_clk;
+		rate = clk_get_rate(div->clk);
+
+		if (hwc->info->clksel[i].flags & CLKSEL_80PCT &&
+		    rate > pct80_rate)
+			continue;
+		if (rate < min_rate)
+			continue;
+
+		parent_names[j] = div->name;
+		hwc->parent_to_clksel[j] = i;
+		hwc->clksel_to_parent[i] = j;
+		j++;
 	}
 
-	init.name = clk_name;
-	init.ops = &cmux_ops;
+	init.name = name;
+	init.ops = ops;
 	init.parent_names = parent_names;
-	init.num_parents = count;
+	init.num_parents = hwc->num_parents = j;
 	init.flags = 0;
-	cmux_clk->hw.init = &init;
+	hwc->hw.init = &init;
+	hwc->cg = cg;
 
-	clk = clk_register(NULL, &cmux_clk->hw);
+	clk = clk_register(NULL, &hwc->hw);
 	if (IS_ERR(clk)) {
-		pr_err("%s: could not register clock\n", clk_name);
-		goto err_clk;
+		pr_err("%s: Couldn't register %s: %ld\n", __func__, name,
+		       PTR_ERR(clk));
+		kfree(hwc);
+		return NULL;
+	}
+
+	return clk;
+}
+
+static struct clk * __init create_one_cmux(struct clockgen *cg, int idx)
+{
+	struct mux_hwclock *hwc;
+	const struct clockgen_pll_div *div;
+	unsigned long plat_rate, min_rate;
+	u64 pct80_rate;
+	u32 clksel;
+
+	hwc = kzalloc(sizeof(*hwc), GFP_KERNEL);
+	if (!hwc)
+		return NULL;
+
+	hwc->reg = cg->regs + 0x20 * idx;
+	hwc->info = cg->info.cmux_groups[cg->info.cmux_to_group[idx]];
+
+	/*
+	 * Find the rate for the default clksel, and treat it as the
+	 * maximum rated core frequency.  If this is an incorrect
+	 * assumption, certain clock options (possibly including the
+	 * default clksel) may be inappropriately excluded on certain
+	 * chips.
+	 */
+	clksel = (cg_in(cg, hwc->reg) & CLKSEL_MASK) >> CLKSEL_SHIFT;
+	div = get_pll_div(cg, hwc, clksel);
+	if (!div)
+		return NULL;
+
+	pct80_rate = clk_get_rate(div->clk);
+	pct80_rate *= 8;
+	do_div(pct80_rate, 10);
+
+	plat_rate = clk_get_rate(cg->pll[PLATFORM_PLL].div[PLL_DIV1].clk);
+
+	if (cg->info.flags & CG_CMUX_GE_PLAT)
+		min_rate = plat_rate;
+	else
+		min_rate = plat_rate / 2;
+
+	return create_mux_common(cg, hwc, &cmux_ops, min_rate,
+				 pct80_rate, "cg-cmux%d", idx);
+}
+
+static struct clk * __init create_one_hwaccel(struct clockgen *cg, int idx)
+{
+	struct mux_hwclock *hwc;
+
+	hwc = kzalloc(sizeof(*hwc), GFP_KERNEL);
+	if (!hwc)
+		return NULL;
+
+	hwc->reg = cg->regs + 0x20 * idx + 0x10;
+	hwc->info = cg->info.hwaccel[idx];
+
+	return create_mux_common(cg, hwc, &hwaccel_ops, 0, 0,
+				 "cg-hwaccel%d", idx);
+}
+
+static void __init create_muxes(struct clockgen *cg)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(cg->cmux); i++) {
+		if (cg->info.cmux_to_group[i] < 0)
+			break;
+		if (cg->info.cmux_to_group[i] >=
+		    ARRAY_SIZE(cg->info.cmux_groups)) {
+			WARN_ON_ONCE(1);
+			continue;
+		}
+
+		cg->cmux[i] = create_one_cmux(cg, i);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(cg->hwaccel); i++) {
+		if (!cg->info.hwaccel[i])
+			continue;
+
+		cg->hwaccel[i] = create_one_hwaccel(cg, i);
 	}
+}
+
+static void __init clockgen_init(struct device_node *np);
+
+/* Legacy nodes may get probed before the parent clockgen node */
+static void __init legacy_init_clockgen(struct device_node *np)
+{
+	if (!clockgen.node)
+		clockgen_init(of_get_parent(np));
+}
+
+/* Legacy node */
+static void __init core_mux_init(struct device_node *np)
+{
+	struct clk *clk;
+	struct resource res;
+	int idx, rc;
+
+	legacy_init_clockgen(np);
+
+	if (of_address_to_resource(np, 0, &res))
+		return;
+
+	idx = (res.start & 0xf0) >> 5;
+	clk = clockgen.cmux[idx];
 
 	rc = of_clk_add_provider(np, of_clk_src_simple_get, clk);
 	if (rc) {
-		pr_err("Could not register clock provider for node:%s\n",
-		       np->name);
-		goto err_clk;
+		pr_err("%s: Couldn't register clk provider for node %s: %d\n",
+		       __func__, np->name, rc);
+		return;
 	}
-	goto err_name;
+}
+
+static struct clk *sysclk_from_fixed(struct device_node *node, const char *name)
+{
+	u32 rate;
+
+	if (of_property_read_u32(node, "clock-frequency", &rate))
+		return ERR_PTR(-ENODEV);
 
-err_clk:
-	kfree(cmux_clk);
-err_name:
-	/* free *_names because they are reallocated when registered */
-	kfree(parent_names);
+	return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
 }
 
-static void __init core_pll_init(struct device_node *np)
+static struct clk *sysclk_from_parent(const char *name)
+{
+	struct clk *clk;
+	const char *parent_name;
+
+	clk = of_clk_get(clockgen.node, 0);
+	if (IS_ERR(clk))
+		return clk;
+
+	/* Register the input clock under the desired name. */
+	parent_name = __clk_get_name(clk);
+	clk = clk_register_fixed_factor(NULL, name, parent_name,
+					0, 1, 1);
+	if (IS_ERR(clk))
+		pr_err("%s: Couldn't register %s: %ld\n", __func__, name,
+		       PTR_ERR(clk));
+
+	return clk;
+}
+
+static struct clk * __init create_sysclk(const char *name)
+{
+	struct device_node *sysclk;
+	struct clk *clk;
+
+	clk = sysclk_from_fixed(clockgen.node, name);
+	if (!IS_ERR(clk))
+		return clk;
+
+	clk = sysclk_from_parent(name);
+	if (!IS_ERR(clk))
+		return clk;
+
+	sysclk = of_get_child_by_name(clockgen.node, "sysclk");
+	if (sysclk) {
+		clk = sysclk_from_fixed(sysclk, name);
+		if (!IS_ERR(clk))
+			return clk;
+	}
+
+	pr_err("%s: No input clock\n", __func__);
+	return NULL;
+}
+
+/* Legacy node */
+static void __init sysclk_init(struct device_node *node)
 {
+	struct clk *clk;
+
+	legacy_init_clockgen(node);
+
+	clk = clockgen.sysclk;
+	if (clk)
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+
+#define PLL_KILL BIT(31)
+
+static void __init create_one_pll(struct clockgen *cg, int idx)
+{
+	u32 __iomem *reg;
 	u32 mult;
-	int i, rc, count;
-	const char *clk_name, *parent_name;
-	struct clk_onecell_data *onecell_data;
-	struct clk      **subclks;
-	void __iomem *base;
+	struct clockgen_pll *pll = &cg->pll[idx];
+	int i;
 
-	base = of_iomap(np, 0);
-	if (!base) {
-		pr_err("iomap error\n");
+	if (!(cg->info.pll_mask & (1 << idx)))
 		return;
+
+	if (cg->info.flags & CG_VER3) {
+		switch (idx) {
+		case PLATFORM_PLL:
+			reg = cg->regs + 0x60080;
+			break;
+		case CGA_PLL1:
+			reg = cg->regs + 0x80;
+			break;
+		case CGA_PLL2:
+			reg = cg->regs + 0xa0;
+			break;
+		case CGB_PLL1:
+			reg = cg->regs + 0x10080;
+			break;
+		case CGB_PLL2:
+			reg = cg->regs + 0x100a0;
+			break;
+		default:
+			WARN_ONCE(1, "index %d\n", idx);
+			return;
+		}
+	} else {
+		if (idx == PLATFORM_PLL)
+			reg = cg->regs + 0xc00;
+		else
+			reg = cg->regs + 0x800 + 0x20 * (idx - 1);
 	}
 
-	/* get the multiple of PLL */
-	mult = ioread32be(base);
+	/* Get the multiple of PLL */
+	mult = cg_in(cg, reg);
 
-	/* check if this PLL is disabled */
+	/* Check if this PLL is disabled */
 	if (mult & PLL_KILL) {
-		pr_debug("PLL:%s is disabled\n", np->name);
-		goto err_map;
+		pr_debug("%s(): pll %p disabled\n", __func__, reg);
+		return;
 	}
-	mult = (mult >> 1) & 0x3f;
 
-	parent_name = of_clk_get_parent_name(np, 0);
-	if (!parent_name) {
-		pr_err("PLL: %s must have a parent\n", np->name);
-		goto err_map;
+	if ((cg->info.flags & CG_VER3) ||
+	    ((cg->info.flags & CG_PLL_8BIT) && idx != PLATFORM_PLL))
+		mult = (mult & GENMASK(8, 1)) >> 1;
+	else
+		mult = (mult & GENMASK(6, 1)) >> 1;
+
+	for (i = 0; i < ARRAY_SIZE(pll->div); i++) {
+		struct clk *clk;
+
+		snprintf(pll->div[i].name, sizeof(pll->div[i].name),
+			 "cg-pll%d-div%d", idx, i + 1);
+
+		clk = clk_register_fixed_factor(NULL,
+				pll->div[i].name, "cg-sysclk", 0, mult, i + 1);
+		if (IS_ERR(clk)) {
+			pr_err("%s: %s: register failed %ld\n",
+			       __func__, pll->div[i].name, PTR_ERR(clk));
+			continue;
+		}
+
+		pll->div[i].clk = clk;
 	}
+}
 
+static void __init create_plls(struct clockgen *cg)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(cg->pll); i++)
+		create_one_pll(cg, i);
+}
+
+static void __init legacy_pll_init(struct device_node *np, int idx)
+{
+	struct clockgen_pll *pll;
+	struct clk_onecell_data *onecell_data;
+	struct clk **subclks;
+	int count, rc;
+
+	legacy_init_clockgen(np);
+
+	pll = &clockgen.pll[idx];
 	count = of_property_count_strings(np, "clock-output-names");
-	if (count < 0 || count > 4) {
-		pr_err("%s: clock is not supported\n", np->name);
-		goto err_map;
-	}
 
-	subclks = kcalloc(count, sizeof(struct clk *), GFP_KERNEL);
+	BUILD_BUG_ON(ARRAY_SIZE(pll->div) < 4);
+	subclks = kcalloc(4, sizeof(struct clk *), GFP_KERNEL);
 	if (!subclks)
-		goto err_map;
+		return;
 
 	onecell_data = kmalloc(sizeof(*onecell_data), GFP_KERNEL);
 	if (!onecell_data)
 		goto err_clks;
 
-	for (i = 0; i < count; i++) {
-		rc = of_property_read_string_index(np, "clock-output-names",
-						   i, &clk_name);
-		if (rc) {
-			pr_err("%s: could not get clock names\n", np->name);
-			goto err_cell;
-		}
-
-		/*
-		 * when count == 4, there are 4 output clocks:
-		 * /1, /2, /3, /4 respectively
-		 * when count < 4, there are at least 2 output clocks:
-		 * /1, /2, (/4, if count == 3) respectively.
-		 */
-		if (count == 4)
-			subclks[i] = clk_register_fixed_factor(NULL, clk_name,
-					parent_name, 0, mult, 1 + i);
-		else
-
-			subclks[i] = clk_register_fixed_factor(NULL, clk_name,
-					parent_name, 0, mult, 1 << i);
-
-		if (IS_ERR(subclks[i])) {
-			pr_err("%s: could not register clock\n", clk_name);
-			goto err_cell;
-		}
+	if (count <= 3) {
+		subclks[0] = pll->div[0].clk;
+		subclks[1] = pll->div[1].clk;
+		subclks[2] = pll->div[3].clk;
+	} else {
+		subclks[0] = pll->div[0].clk;
+		subclks[1] = pll->div[1].clk;
+		subclks[2] = pll->div[2].clk;
+		subclks[3] = pll->div[3].clk;
 	}
 
 	onecell_data->clks = subclks;
@@ -233,125 +1051,223 @@ static void __init core_pll_init(struct device_node *np)
 
 	rc = of_clk_add_provider(np, of_clk_src_onecell_get, onecell_data);
 	if (rc) {
-		pr_err("Could not register clk provider for node:%s\n",
-		       np->name);
+		pr_err("%s: Couldn't register clk provider for node %s: %d\n",
+		       __func__, np->name, rc);
 		goto err_cell;
 	}
 
-	iounmap(base);
 	return;
 err_cell:
 	kfree(onecell_data);
 err_clks:
 	kfree(subclks);
-err_map:
-	iounmap(base);
 }
 
-static void __init sysclk_init(struct device_node *node)
+/* Legacy node */
+static void __init pltfrm_pll_init(struct device_node *np)
 {
-	struct clk *clk;
-	const char *clk_name = node->name;
-	struct device_node *np = of_get_parent(node);
-	u32 rate;
+	legacy_pll_init(np, PLATFORM_PLL);
+}
 
-	if (!np) {
-		pr_err("could not get parent node\n");
+/* Legacy node */
+static void __init core_pll_init(struct device_node *np)
+{
+	struct resource res;
+	int idx;
+
+	if (of_address_to_resource(np, 0, &res))
 		return;
+
+	if ((res.start & 0xfff) == 0xc00) {
+		/*
+		 * ls1021a devtree labels the platform PLL
+		 * with the core PLL compatible
+		 */
+		pltfrm_pll_init(np);
+	} else {
+		idx = (res.start & 0xf0) >> 5;
+		legacy_pll_init(np, CGA_PLL1 + idx);
 	}
+}
 
-	if (of_property_read_u32(np, "clock-frequency", &rate)) {
-		of_node_put(node);
-		return;
+static struct clk *clockgen_clk_get(struct of_phandle_args *clkspec, void *data)
+{
+	struct clockgen *cg = data;
+	struct clk *clk;
+	struct clockgen_pll *pll;
+	u32 type, idx;
+
+	if (clkspec->args_count < 2) {
+		pr_err("%s: insufficient phandle args\n", __func__);
+		return ERR_PTR(-EINVAL);
 	}
 
-	of_property_read_string(np, "clock-output-names", &clk_name);
+	type = clkspec->args[0];
+	idx = clkspec->args[1];
 
-	clk = clk_register_fixed_rate(NULL, clk_name, NULL, CLK_IS_ROOT, rate);
-	if (!IS_ERR(clk))
-		of_clk_add_provider(np, of_clk_src_simple_get, clk);
+	switch (type) {
+	case 0:
+		if (idx != 0)
+			goto bad_args;
+		clk = cg->sysclk;
+		break;
+	case 1:
+		if (idx >= ARRAY_SIZE(cg->cmux))
+			goto bad_args;
+		clk = cg->cmux[idx];
+		break;
+	case 2:
+		if (idx >= ARRAY_SIZE(cg->hwaccel))
+			goto bad_args;
+		clk = cg->hwaccel[idx];
+		break;
+	case 3:
+		if (idx >= ARRAY_SIZE(cg->fman))
+			goto bad_args;
+		clk = cg->fman[idx];
+		break;
+	case 4:
+		pll = &cg->pll[PLATFORM_PLL];
+		if (idx >= ARRAY_SIZE(pll->div))
+			goto bad_args;
+		clk = pll->div[idx].clk;
+		break;
+	default:
+		goto bad_args;
+	}
+
+	if (!clk)
+		return ERR_PTR(-ENOENT);
+	return clk;
+
+bad_args:
+	pr_err("%s: Bad phandle args %u %u\n", __func__, type, idx);
+	return ERR_PTR(-EINVAL);
 }
 
-static void __init pltfrm_pll_init(struct device_node *np)
+#ifdef CONFIG_PPC
+#include <asm/mpc85xx.h>
+
+static const u32 a4510_svrs[] __initconst = {
+	(SVR_P2040 << 8) | 0x10,	/* P2040 1.0 */
+	(SVR_P2040 << 8) | 0x11,	/* P2040 1.1 */
+	(SVR_P2041 << 8) | 0x10,	/* P2041 1.0 */
+	(SVR_P2041 << 8) | 0x11,	/* P2041 1.1 */
+	(SVR_P3041 << 8) | 0x10,	/* P3041 1.0 */
+	(SVR_P3041 << 8) | 0x11,	/* P3041 1.1 */
+	(SVR_P4040 << 8) | 0x20,	/* P4040 2.0 */
+	(SVR_P4080 << 8) | 0x20,	/* P4080 2.0 */
+	(SVR_P5010 << 8) | 0x10,	/* P5010 1.0 */
+	(SVR_P5010 << 8) | 0x20,	/* P5010 2.0 */
+	(SVR_P5020 << 8) | 0x10,	/* P5020 1.0 */
+	(SVR_P5021 << 8) | 0x10,	/* P5021 1.0 */
+	(SVR_P5040 << 8) | 0x10,	/* P5040 1.0 */
+};
+
+#define SVR_SECURITY	0x80000	/* The Security (E) bit */
+
+static bool __init has_erratum_a4510(void)
 {
-	void __iomem *base;
-	uint32_t mult;
-	const char *parent_name, *clk_name;
-	int i, _errno;
-	struct clk_onecell_data *cod;
+	u32 svr = mfspr(SPRN_SVR);
+	int i;
 
-	base = of_iomap(np, 0);
-	if (!base) {
-		pr_err("%s(): %s: of_iomap() failed\n", __func__, np->name);
-		return;
+	svr &= ~SVR_SECURITY;
+
+	for (i = 0; i < ARRAY_SIZE(a4510_svrs); i++) {
+		if (svr == a4510_svrs[i])
+			return true;
 	}
 
-	/* Get the multiple of PLL */
-	mult = ioread32be(base);
+	return false;
+}
+#else
+static bool __init has_erratum_a4510(void)
+{
+	return false;
+}
+#endif
 
-	iounmap(base);
+static void __init clockgen_init(struct device_node *np)
+{
+	int i, ret;
+	bool is_old_ls1021a = false;
 
-	/* Check if this PLL is disabled */
-	if (mult & PLL_KILL) {
-		pr_debug("%s(): %s: Disabled\n", __func__, np->name);
+	/* May have already been called by a legacy probe */
+	if (clockgen.node)
 		return;
-	}
-	mult = (mult & GENMASK(6, 1)) >> 1;
 
-	parent_name = of_clk_get_parent_name(np, 0);
-	if (!parent_name) {
-		pr_err("%s(): %s: of_clk_get_parent_name() failed\n",
-		       __func__, np->name);
+	clockgen.node = np;
+	clockgen.regs = of_iomap(np, 0);
+	if (!clockgen.regs &&
+	    of_device_is_compatible(of_root, "fsl,ls1021a")) {
+		/* Compatibility hack for old, broken device trees */
+		clockgen.regs = ioremap(0x1ee1000, 0x1000);
+		is_old_ls1021a = true;
+	}
+	if (!clockgen.regs) {
+		pr_err("%s(): %s: of_iomap() failed\n", __func__, np->name);
 		return;
 	}
 
-	i = of_property_count_strings(np, "clock-output-names");
-	if (i < 0) {
-		pr_err("%s(): %s: of_property_count_strings(clock-output-names) = %d\n",
-		       __func__, np->name, i);
-		return;
+	for (i = 0; i < ARRAY_SIZE(chipinfo); i++) {
+		if (of_device_is_compatible(np, chipinfo[i].compat))
+			break;
+		if (is_old_ls1021a &&
+		    !strcmp(chipinfo[i].compat, "fsl,ls1021a-clockgen"))
+			break;
 	}
 
-	cod = kmalloc(sizeof(*cod) + i * sizeof(struct clk *), GFP_KERNEL);
-	if (!cod)
-		return;
-	cod->clks = (struct clk **)(cod + 1);
-	cod->clk_num = i;
-
-	for (i = 0; i < cod->clk_num; i++) {
-		_errno = of_property_read_string_index(np, "clock-output-names",
-						       i, &clk_name);
-		if (_errno < 0) {
-			pr_err("%s(): %s: of_property_read_string_index(clock-output-names) = %d\n",
-			       __func__, np->name, _errno);
-			goto return_clk_unregister;
-		}
+	if (i == ARRAY_SIZE(chipinfo)) {
+		pr_err("%s: unknown clockgen node %s\n", __func__,
+		       np->full_name);
+		goto err;
+	}
+	clockgen.info = chipinfo[i];
+
+	if (clockgen.info.guts_compat) {
+		struct device_node *guts;
 
-		cod->clks[i] = clk_register_fixed_factor(NULL, clk_name,
-					       parent_name, 0, mult, 1 + i);
-		if (IS_ERR(cod->clks[i])) {
-			pr_err("%s(): %s: clk_register_fixed_factor(%s) = %ld\n",
-			       __func__, np->name,
-			       clk_name, PTR_ERR(cod->clks[i]));
-			goto return_clk_unregister;
+		guts = of_find_compatible_node(NULL, NULL,
+					       clockgen.info.guts_compat);
+		if (guts) {
+			clockgen.guts = of_iomap(guts, 0);
+			if (!clockgen.guts) {
+				pr_err("%s: Couldn't map %s regs\n", __func__,
+				       guts->full_name);
+			}
 		}
+
 	}
 
-	_errno = of_clk_add_provider(np, of_clk_src_onecell_get, cod);
-	if (_errno < 0) {
-		pr_err("%s(): %s: of_clk_add_provider() = %d\n",
-		       __func__, np->name, _errno);
-		goto return_clk_unregister;
+	if (has_erratum_a4510())
+		clockgen.info.flags |= CG_CMUX_GE_PLAT;
+
+	clockgen.sysclk = create_sysclk("cg-sysclk");
+	create_plls(&clockgen);
+	create_muxes(&clockgen);
+
+	if (clockgen.info.init_periph)
+		clockgen.info.init_periph(&clockgen);
+
+	ret = of_clk_add_provider(np, clockgen_clk_get, &clockgen);
+	if (ret) {
+		pr_err("%s: Couldn't register clk provider for node %s: %d\n",
+		       __func__, np->name, ret);
 	}
 
 	return;
-
-return_clk_unregister:
-	while (--i >= 0)
-		clk_unregister(cod->clks[i]);
-	kfree(cod);
+err:
+	iounmap(clockgen.regs);
+	clockgen.regs = NULL;
 }
 
+CLK_OF_DECLARE(qoriq_clockgen_1, "fsl,qoriq-clockgen-1.0", clockgen_init);
+CLK_OF_DECLARE(qoriq_clockgen_2, "fsl,qoriq-clockgen-2.0", clockgen_init);
+CLK_OF_DECLARE(qoriq_clockgen_ls1021a, "fsl,ls1021a-clockgen", clockgen_init);
+CLK_OF_DECLARE(qoriq_clockgen_ls1043a, "fsl,ls1043a-clockgen", clockgen_init);
+CLK_OF_DECLARE(qoriq_clockgen_ls2080a, "fsl,ls2080a-clockgen", clockgen_init);
+
+/* Legacy nodes */
 CLK_OF_DECLARE(qoriq_sysclk_1, "fsl,qoriq-sysclk-1.0", sysclk_init);
 CLK_OF_DECLARE(qoriq_sysclk_2, "fsl,qoriq-sysclk-2.0", sysclk_init);
 CLK_OF_DECLARE(qoriq_core_pll_1, "fsl,qoriq-core-pll-1.0", core_pll_init);
diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c
index 2570f2a..a34355f 100644
--- a/drivers/iommu/fsl_pamu.c
+++ b/drivers/iommu/fsl_pamu.c
@@ -20,11 +20,11 @@
 
 #include "fsl_pamu.h"
 
+#include <linux/fsl/guts.h>
 #include <linux/interrupt.h>
 #include <linux/genalloc.h>
 
 #include <asm/mpc85xx.h>
-#include <asm/fsl_guts.h>
 
 /* define indexes for each operation mapping scenario */
 #define OMI_QMAN        0x00
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 5844b80..3e8b29e 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -166,9 +166,8 @@ config INPUT_ADBHID
 	  Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
 	  such as keyboards, mice, joysticks, trackpads  or graphic tablets
 	  handled by the input layer.  If you say Y here, make sure to say Y to
-	  the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV),
-	  "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface
-	  support" (CONFIG_INPUT_EVDEV) as well.
+	  the corresponding drivers "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and
+	  "Event interface support" (CONFIG_INPUT_EVDEV) as well.
 
 	  If unsure, say Y.
 
diff --git a/drivers/misc/cxl/vphb.c b/drivers/misc/cxl/vphb.c
index 94b5208..c241e15 100644
--- a/drivers/misc/cxl/vphb.c
+++ b/drivers/misc/cxl/vphb.c
@@ -290,8 +290,10 @@ void cxl_pci_vphb_remove(struct cxl_afu *afu)
 		return;
 
 	phb = afu->phb;
+	afu->phb = NULL;
 
 	pci_remove_root_bus(phb->bus);
+	pcibios_free_controller(phb);
 }
 
 struct cxl_afu *cxl_pci_to_afu(struct pci_dev *dev)
diff --git a/drivers/ps3/ps3-lpm.c b/drivers/ps3/ps3-lpm.c
index cb7d3a6..e34de9a 100644
--- a/drivers/ps3/ps3-lpm.c
+++ b/drivers/ps3/ps3-lpm.c
@@ -901,7 +901,7 @@ void ps3_disable_pm(u32 cpu)
 	result = lv1_stop_lpm(lpm_priv->lpm_id, &tmp);
 
 	if (result) {
-		if(result != LV1_WRONG_STATE)
+		if (result != LV1_WRONG_STATE)
 			dev_err(sbd_core(), "%s:%u: lv1_stop_lpm failed: %s\n",
 				__func__, __LINE__, ps3_result(result));
 		return;
diff --git a/drivers/ps3/ps3-vuart.c b/drivers/ps3/ps3-vuart.c
index d6db822..632701a 100644
--- a/drivers/ps3/ps3-vuart.c
+++ b/drivers/ps3/ps3-vuart.c
@@ -1000,12 +1000,11 @@ static int ps3_vuart_probe(struct ps3_system_bus_device *dev)
 	dev_dbg(&dev->core, "%s:%d\n", __func__, __LINE__);
 
 	drv = ps3_system_bus_dev_to_vuart_drv(dev);
+	BUG_ON(!drv);
 
 	dev_dbg(&dev->core, "%s:%d: (%s)\n", __func__, __LINE__,
 		drv->core.core.name);
 
-	BUG_ON(!drv);
-
 	if (dev->port_number >= PORT_COUNT) {
 		BUG();
 		return -EINVAL;
diff --git a/arch/powerpc/include/asm/fsl_guts.h b/include/linux/fsl/guts.h
similarity index 97%
rename from arch/powerpc/include/asm/fsl_guts.h
rename to include/linux/fsl/guts.h
index 43b6bb1..84d971f 100644
--- a/arch/powerpc/include/asm/fsl_guts.h
+++ b/include/linux/fsl/guts.h
@@ -12,9 +12,10 @@
  * option) any later version.
  */
 
-#ifndef __ASM_POWERPC_FSL_GUTS_H__
-#define __ASM_POWERPC_FSL_GUTS_H__
-#ifdef __KERNEL__
+#ifndef __FSL_GUTS_H__
+#define __FSL_GUTS_H__
+
+#include <linux/types.h>
 
 /**
  * Global Utility Registers.
@@ -189,4 +190,3 @@ static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts,
 #endif
 
 #endif
-#endif
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index aceaaed..3043d6b 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -96,9 +96,12 @@ savedefconfig: $(obj)/conf
 defconfig: $(obj)/conf
 ifeq ($(KBUILD_DEFCONFIG),)
 	$< $(silent) --defconfig $(Kconfig)
-else
+else ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)),)
 	@$(kecho) "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'"
 	$(Q)$< $(silent) --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig)
+else
+	@$(kecho) "*** Default configuration is based on target '$(KBUILD_DEFCONFIG)'"
+	$(Q)$(MAKE) -f $(srctree)/Makefile $(KBUILD_DEFCONFIG)
 endif
 
 %_defconfig: $(obj)/conf
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c
index 9621b91..6f236f1 100644
--- a/sound/soc/fsl/mpc8610_hpcd.c
+++ b/sound/soc/fsl/mpc8610_hpcd.c
@@ -12,11 +12,11 @@
 
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/fsl/guts.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/slab.h>
 #include <sound/soc.h>
-#include <asm/fsl_guts.h>
 
 #include "fsl_dma.h"
 #include "fsl_ssi.h"
diff --git a/sound/soc/fsl/p1022_ds.c b/sound/soc/fsl/p1022_ds.c
index 71c1a7d..747aab0 100644
--- a/sound/soc/fsl/p1022_ds.c
+++ b/sound/soc/fsl/p1022_ds.c
@@ -11,12 +11,12 @@
  */
 
 #include <linux/module.h>
+#include <linux/fsl/guts.h>
 #include <linux/interrupt.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/slab.h>
 #include <sound/soc.h>
-#include <asm/fsl_guts.h>
 
 #include "fsl_dma.h"
 #include "fsl_ssi.h"
diff --git a/sound/soc/fsl/p1022_rdk.c b/sound/soc/fsl/p1022_rdk.c
index ee29048..1dd49e5 100644
--- a/sound/soc/fsl/p1022_rdk.c
+++ b/sound/soc/fsl/p1022_rdk.c
@@ -18,12 +18,12 @@
  */
 
 #include <linux/module.h>
+#include <linux/fsl/guts.h>
 #include <linux/interrupt.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/slab.h>
 #include <sound/soc.h>
-#include <asm/fsl_guts.h>
 
 #include "fsl_dma.h"
 #include "fsl_ssi.h"
diff --git a/tools/testing/selftests/powerpc/Makefile b/tools/testing/selftests/powerpc/Makefile
index 03ca2e6..0c2706b 100644
--- a/tools/testing/selftests/powerpc/Makefile
+++ b/tools/testing/selftests/powerpc/Makefile
@@ -12,7 +12,17 @@ CFLAGS := -Wall -O2 -flto -Wall -Werror -DGIT_VERSION='"$(GIT_VERSION)"' -I$(CUR
 
 export CFLAGS
 
-SUB_DIRS = pmu copyloops mm tm primitives stringloops vphn switch_endian dscr
+SUB_DIRS = benchmarks 		\
+	   copyloops		\
+	   dscr			\
+	   mm			\
+	   pmu			\
+	   primitives		\
+	   stringloops		\
+	   switch_endian	\
+	   syscalls		\
+	   tm			\
+	   vphn
 
 endif
 
diff --git a/tools/testing/selftests/powerpc/benchmarks/.gitignore b/tools/testing/selftests/powerpc/benchmarks/.gitignore
new file mode 100644
index 0000000..b4709ea
--- /dev/null
+++ b/tools/testing/selftests/powerpc/benchmarks/.gitignore
@@ -0,0 +1 @@
+gettimeofday
diff --git a/tools/testing/selftests/powerpc/benchmarks/Makefile b/tools/testing/selftests/powerpc/benchmarks/Makefile
new file mode 100644
index 0000000..5fa4870
--- /dev/null
+++ b/tools/testing/selftests/powerpc/benchmarks/Makefile
@@ -0,0 +1,12 @@
+TEST_PROGS := gettimeofday
+
+CFLAGS += -O2
+
+all: $(TEST_PROGS)
+
+$(TEST_PROGS): ../harness.c
+
+include ../../lib.mk
+
+clean:
+	rm -f $(TEST_PROGS) *.o
diff --git a/tools/testing/selftests/powerpc/benchmarks/gettimeofday.c b/tools/testing/selftests/powerpc/benchmarks/gettimeofday.c
new file mode 100644
index 0000000..3af3c21
--- /dev/null
+++ b/tools/testing/selftests/powerpc/benchmarks/gettimeofday.c
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2015, Anton Blanchard, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <sys/time.h>
+#include <stdio.h>
+
+#include "utils.h"
+
+static int test_gettimeofday(void)
+{
+	int i;
+
+	struct timeval tv_start, tv_end;
+
+	gettimeofday(&tv_start, NULL);
+
+	for(i = 0; i < 100000000; i++) {
+		gettimeofday(&tv_end, NULL);
+	}
+
+	printf("time = %.6f\n", tv_end.tv_sec - tv_start.tv_sec + (tv_end.tv_usec - tv_start.tv_usec) * 1e-6);
+
+	return 0;
+}
+
+int main(void)
+{
+	return test_harness(test_gettimeofday, "gettimeofday");
+}
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/back_to_back_ebbs_test.c b/tools/testing/selftests/powerpc/pmu/ebb/back_to_back_ebbs_test.c
index 66ea765..94110b1 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/back_to_back_ebbs_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/back_to_back_ebbs_test.c
@@ -63,6 +63,8 @@ int back_to_back_ebbs(void)
 {
 	struct event event;
 
+	SKIP_IF(!ebb_is_supported());
+
 	event_init_named(&event, 0x1001e, "cycles");
 	event_leader_ebb_init(&event);
 
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/close_clears_pmcc_test.c b/tools/testing/selftests/powerpc/pmu/ebb/close_clears_pmcc_test.c
index 0f0423d..ac18cf6 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/close_clears_pmcc_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/close_clears_pmcc_test.c
@@ -20,6 +20,8 @@ int close_clears_pmcc(void)
 {
 	struct event event;
 
+	SKIP_IF(!ebb_is_supported());
+
 	event_init_named(&event, 0x1001e, "cycles");
 	event_leader_ebb_init(&event);
 
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_pinned_vs_ebb_test.c b/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_pinned_vs_ebb_test.c
index d3ed64d..f0632e7 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_pinned_vs_ebb_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_pinned_vs_ebb_test.c
@@ -43,6 +43,8 @@ int cpu_event_pinned_vs_ebb(void)
 	int cpu, rc;
 	pid_t pid;
 
+	SKIP_IF(!ebb_is_supported());
+
 	cpu = pick_online_cpu();
 	FAIL_IF(cpu < 0);
 	FAIL_IF(bind_to_cpu(cpu));
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_vs_ebb_test.c b/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_vs_ebb_test.c
index 8b972c2..33e56a2 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_vs_ebb_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_vs_ebb_test.c
@@ -41,6 +41,8 @@ int cpu_event_vs_ebb(void)
 	int cpu, rc;
 	pid_t pid;
 
+	SKIP_IF(!ebb_is_supported());
+
 	cpu = pick_online_cpu();
 	FAIL_IF(cpu < 0);
 	FAIL_IF(bind_to_cpu(cpu));
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/cycles_test.c b/tools/testing/selftests/powerpc/pmu/ebb/cycles_test.c
index 8590fc1..7c57a8d 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/cycles_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/cycles_test.c
@@ -16,6 +16,8 @@ int cycles(void)
 {
 	struct event event;
 
+	SKIP_IF(!ebb_is_supported());
+
 	event_init_named(&event, 0x1001e, "cycles");
 	event_leader_ebb_init(&event);
 
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_freeze_test.c b/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_freeze_test.c
index 754b3f2..ecf5ee3 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_freeze_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_freeze_test.c
@@ -56,6 +56,8 @@ int cycles_with_freeze(void)
 	uint64_t val;
 	bool fc_cleared;
 
+	SKIP_IF(!ebb_is_supported());
+
 	event_init_named(&event, 0x1001e, "cycles");
 	event_leader_ebb_init(&event);
 
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_mmcr2_test.c b/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_mmcr2_test.c
index d43029b..c0faba5 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_mmcr2_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_mmcr2_test.c
@@ -26,6 +26,8 @@ int cycles_with_mmcr2(void)
 	int i;
 	bool bad_mmcr2;
 
+	SKIP_IF(!ebb_is_supported());
+
 	event_init_named(&event, 0x1001e, "cycles");
 	event_leader_ebb_init(&event);
 
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/ebb.c b/tools/testing/selftests/powerpc/pmu/ebb/ebb.c
index d7a72ce..9729d9f 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/ebb.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/ebb.c
@@ -13,6 +13,7 @@
 #include <stdlib.h>
 #include <string.h>
 #include <sys/ioctl.h>
+#include <linux/auxvec.h>
 
 #include "trace.h"
 #include "reg.h"
@@ -319,6 +320,16 @@ void ebb_global_disable(void)
 	mb();
 }
 
+bool ebb_is_supported(void)
+{
+#ifdef PPC_FEATURE2_EBB
+	/* EBB requires at least POWER8 */
+	return ((long)get_auxv_entry(AT_HWCAP2) & PPC_FEATURE2_EBB);
+#else
+	return false;
+#endif
+}
+
 void event_ebb_init(struct event *e)
 {
 	e->attr.config |= (1ull << 63);
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/ebb.h b/tools/testing/selftests/powerpc/pmu/ebb/ebb.h
index e44eee5..f87e761 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/ebb.h
+++ b/tools/testing/selftests/powerpc/pmu/ebb/ebb.h
@@ -52,6 +52,7 @@ void standard_ebb_callee(void);
 int ebb_event_enable(struct event *e);
 void ebb_global_enable(void);
 void ebb_global_disable(void);
+bool ebb_is_supported(void);
 void ebb_freeze_pmcs(void);
 void ebb_unfreeze_pmcs(void);
 void event_ebb_init(struct event *e);
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_child_test.c b/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_child_test.c
index c45f948..1e7b7fe 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_child_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_child_test.c
@@ -47,6 +47,8 @@ int ebb_on_child(void)
 	struct event event;
 	pid_t pid;
 
+	SKIP_IF(!ebb_is_supported());
+
 	FAIL_IF(pipe(read_pipe.fds) == -1);
 	FAIL_IF(pipe(write_pipe.fds) == -1);
 
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_willing_child_test.c b/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_willing_child_test.c
index 11acf1d..a991d2e 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_willing_child_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_willing_child_test.c
@@ -54,6 +54,8 @@ int ebb_on_willing_child(void)
 	struct event event;
 	pid_t pid;
 
+	SKIP_IF(!ebb_is_supported());
+
 	FAIL_IF(pipe(read_pipe.fds) == -1);
 	FAIL_IF(pipe(write_pipe.fds) == -1);
 
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/ebb_vs_cpu_event_test.c b/tools/testing/selftests/powerpc/pmu/ebb/ebb_vs_cpu_event_test.c
index be4dd5a..af20a2b 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/ebb_vs_cpu_event_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/ebb_vs_cpu_event_test.c
@@ -41,6 +41,8 @@ int ebb_vs_cpu_event(void)
 	int cpu, rc;
 	pid_t pid;
 
+	SKIP_IF(!ebb_is_supported());
+
 	cpu = pick_online_cpu();
 	FAIL_IF(cpu < 0);
 	FAIL_IF(bind_to_cpu(cpu));
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/event_attributes_test.c b/tools/testing/selftests/powerpc/pmu/ebb/event_attributes_test.c
index 7e78153..7762ab2 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/event_attributes_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/event_attributes_test.c
@@ -16,6 +16,8 @@ int event_attributes(void)
 {
 	struct event event, leader;
 
+	SKIP_IF(!ebb_is_supported());
+
 	event_init(&event, 0x1001e);
 	event_leader_ebb_init(&event);
 	/* Expected to succeed */
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/fork_cleanup_test.c b/tools/testing/selftests/powerpc/pmu/ebb/fork_cleanup_test.c
index 9e7af6e..167135b 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/fork_cleanup_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/fork_cleanup_test.c
@@ -44,6 +44,8 @@ int fork_cleanup(void)
 {
 	pid_t pid;
 
+	SKIP_IF(!ebb_is_supported());
+
 	event_init_named(&event, 0x1001e, "cycles");
 	event_leader_ebb_init(&event);
 
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/instruction_count_test.c b/tools/testing/selftests/powerpc/pmu/ebb/instruction_count_test.c
index f8190fa..5da3551 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/instruction_count_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/instruction_count_test.c
@@ -111,6 +111,8 @@ int instruction_count(void)
 	struct event event;
 	uint64_t overhead;
 
+	SKIP_IF(!ebb_is_supported());
+
 	event_init_named(&event, 0x400FA, "PM_RUN_INST_CMPL");
 	event_leader_ebb_init(&event);
 	event.attr.exclude_kernel = 1;
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/lost_exception_test.c b/tools/testing/selftests/powerpc/pmu/ebb/lost_exception_test.c
index 0c9dd9b..eb8acb7 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/lost_exception_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/lost_exception_test.c
@@ -23,6 +23,8 @@ static int test_body(void)
 	int i, orig_period, max_period;
 	struct event event;
 
+	SKIP_IF(!ebb_is_supported());
+
 	/* We use PMC4 to make sure the kernel switches all counters correctly */
 	event_init_named(&event, 0x40002, "instructions");
 	event_leader_ebb_init(&event);
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/multi_counter_test.c b/tools/testing/selftests/powerpc/pmu/ebb/multi_counter_test.c
index 67d78af..6ff8c8f 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/multi_counter_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/multi_counter_test.c
@@ -18,6 +18,8 @@ int multi_counter(void)
 	struct event events[6];
 	int i, group_fd;
 
+	SKIP_IF(!ebb_is_supported());
+
 	event_init_named(&events[0], 0x1001C, "PM_CMPLU_STALL_THRD");
 	event_init_named(&events[1], 0x2D016, "PM_CMPLU_STALL_FXU");
 	event_init_named(&events[2], 0x30006, "PM_CMPLU_STALL_OTHER_CMPL");
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/multi_ebb_procs_test.c b/tools/testing/selftests/powerpc/pmu/ebb/multi_ebb_procs_test.c
index b8dc371..037cb61 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/multi_ebb_procs_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/multi_ebb_procs_test.c
@@ -79,6 +79,8 @@ int multi_ebb_procs(void)
 	pid_t pids[NR_CHILDREN];
 	int cpu, rc, i;
 
+	SKIP_IF(!ebb_is_supported());
+
 	cpu = pick_online_cpu();
 	FAIL_IF(cpu < 0);
 	FAIL_IF(bind_to_cpu(cpu));
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c b/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c
index 2f9bf8e..8341d77 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c
@@ -19,6 +19,8 @@ static int no_handler_test(void)
 	u64 val;
 	int i;
 
+	SKIP_IF(!ebb_is_supported());
+
 	event_init_named(&event, 0x1001e, "cycles");
 	event_leader_ebb_init(&event);
 
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/pmae_handling_test.c b/tools/testing/selftests/powerpc/pmu/ebb/pmae_handling_test.c
index 986500f..c5fa647 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/pmae_handling_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/pmae_handling_test.c
@@ -58,6 +58,8 @@ static int test_body(void)
 {
 	struct event event;
 
+	SKIP_IF(!ebb_is_supported());
+
 	event_init_named(&event, 0x1001e, "cycles");
 	event_leader_ebb_init(&event);
 
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c b/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c
index a503fa7..c22860a 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c
@@ -49,6 +49,8 @@ int pmc56_overflow(void)
 {
 	struct event event;
 
+	SKIP_IF(!ebb_is_supported());
+
 	/* Use PMC2 so we set PMCjCE, which enables PMC5/6 */
 	event_init(&event, 0x2001e);
 	event_leader_ebb_init(&event);
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test.c b/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test.c
index 0cae66f..5b1188f 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test.c
@@ -18,6 +18,8 @@ int reg_access(void)
 {
 	uint64_t val, expected;
 
+	SKIP_IF(!ebb_is_supported());
+
 	expected = 0x8000000100000000ull;
 	mtspr(SPRN_BESCR, expected);
 	val = mfspr(SPRN_BESCR);
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/task_event_pinned_vs_ebb_test.c b/tools/testing/selftests/powerpc/pmu/ebb/task_event_pinned_vs_ebb_test.c
index d56607e..1846f4e 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/task_event_pinned_vs_ebb_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/task_event_pinned_vs_ebb_test.c
@@ -42,6 +42,8 @@ int task_event_pinned_vs_ebb(void)
 	pid_t pid;
 	int rc;
 
+	SKIP_IF(!ebb_is_supported());
+
 	FAIL_IF(pipe(read_pipe.fds) == -1);
 	FAIL_IF(pipe(write_pipe.fds) == -1);
 
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/task_event_vs_ebb_test.c b/tools/testing/selftests/powerpc/pmu/ebb/task_event_vs_ebb_test.c
index eba3219..e3bc6e9 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/task_event_vs_ebb_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/task_event_vs_ebb_test.c
@@ -40,6 +40,8 @@ int task_event_vs_ebb(void)
 	pid_t pid;
 	int rc;
 
+	SKIP_IF(!ebb_is_supported());
+
 	FAIL_IF(pipe(read_pipe.fds) == -1);
 	FAIL_IF(pipe(write_pipe.fds) == -1);
 
diff --git a/tools/testing/selftests/powerpc/syscalls/.gitignore b/tools/testing/selftests/powerpc/syscalls/.gitignore
new file mode 100644
index 0000000..f0f3fcc
--- /dev/null
+++ b/tools/testing/selftests/powerpc/syscalls/.gitignore
@@ -0,0 +1 @@
+ipc_unmuxed
diff --git a/tools/testing/selftests/powerpc/syscalls/Makefile b/tools/testing/selftests/powerpc/syscalls/Makefile
new file mode 100644
index 0000000..b35c794
--- /dev/null
+++ b/tools/testing/selftests/powerpc/syscalls/Makefile
@@ -0,0 +1,12 @@
+TEST_PROGS := ipc_unmuxed
+
+CFLAGS += -I../../../../../usr/include
+
+all: $(TEST_PROGS)
+
+$(TEST_PROGS): ../harness.c
+
+include ../../lib.mk
+
+clean:
+	rm -f $(TEST_PROGS) *.o
diff --git a/tools/testing/selftests/powerpc/syscalls/ipc.h b/tools/testing/selftests/powerpc/syscalls/ipc.h
new file mode 100644
index 0000000..fbebc02
--- /dev/null
+++ b/tools/testing/selftests/powerpc/syscalls/ipc.h
@@ -0,0 +1,47 @@
+#ifdef __NR_semop
+DO_TEST(semop, __NR_semop)
+#endif
+
+#ifdef __NR_semget
+DO_TEST(semget, __NR_semget)
+#endif
+
+#ifdef __NR_semctl
+DO_TEST(semctl, __NR_semctl)
+#endif
+
+#ifdef __NR_semtimedop
+DO_TEST(semtimedop, __NR_semtimedop)
+#endif
+
+#ifdef __NR_msgsnd
+DO_TEST(msgsnd, __NR_msgsnd)
+#endif
+
+#ifdef __NR_msgrcv
+DO_TEST(msgrcv, __NR_msgrcv)
+#endif
+
+#ifdef __NR_msgget
+DO_TEST(msgget, __NR_msgget)
+#endif
+
+#ifdef __NR_msgctl
+DO_TEST(msgctl, __NR_msgctl)
+#endif
+
+#ifdef __NR_shmat
+DO_TEST(shmat, __NR_shmat)
+#endif
+
+#ifdef __NR_shmdt
+DO_TEST(shmdt, __NR_shmdt)
+#endif
+
+#ifdef __NR_shmget
+DO_TEST(shmget, __NR_shmget)
+#endif
+
+#ifdef __NR_shmctl
+DO_TEST(shmctl, __NR_shmctl)
+#endif
diff --git a/tools/testing/selftests/powerpc/syscalls/ipc_unmuxed.c b/tools/testing/selftests/powerpc/syscalls/ipc_unmuxed.c
new file mode 100644
index 0000000..2ac0270
--- /dev/null
+++ b/tools/testing/selftests/powerpc/syscalls/ipc_unmuxed.c
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2015, Michael Ellerman, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This test simply tests that certain syscalls are implemented. It doesn't
+ * actually exercise their logic in any way.
+ */
+
+#define _GNU_SOURCE
+#include <errno.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <sys/syscall.h>
+
+#include "utils.h"
+
+
+#define DO_TEST(_name, _num)	\
+static int test_##_name(void)			\
+{						\
+	int rc;					\
+	printf("Testing " #_name);		\
+	errno = 0;				\
+	rc = syscall(_num, -1, 0, 0, 0, 0, 0);	\
+	printf("\treturned %d, errno %d\n", rc, errno); \
+	return errno == ENOSYS;			\
+}
+
+#include "ipc.h"
+#undef DO_TEST
+
+static int ipc_unmuxed(void)
+{
+	int tests_done = 0;
+
+#define DO_TEST(_name, _num)		\
+	FAIL_IF(test_##_name());	\
+	tests_done++;
+
+#include "ipc.h"
+#undef DO_TEST
+
+	/*
+	 * If we ran no tests then it means none of the syscall numbers were
+	 * defined, possibly because we were built against old headers. But it
+	 * means we didn't really test anything, so instead of passing mark it
+	 * as a skip to give the user a clue.
+	 */
+	SKIP_IF(tests_done == 0);
+
+	return 0;
+}
+
+int main(void)
+{
+	return test_harness(ipc_unmuxed, "ipc_unmuxed");
+}
diff --git a/tools/testing/selftests/powerpc/tm/tm-syscall.c b/tools/testing/selftests/powerpc/tm/tm-syscall.c
index 1276e23..e835bf7 100644
--- a/tools/testing/selftests/powerpc/tm/tm-syscall.c
+++ b/tools/testing/selftests/powerpc/tm/tm-syscall.c
@@ -77,13 +77,23 @@ pid_t getppid_tm(bool suspend)
 	exit(-1);
 }
 
+static inline bool have_htm_nosc(void)
+{
+#ifdef PPC_FEATURE2_HTM_NOSC
+	return ((long)get_auxv_entry(AT_HWCAP2) & PPC_FEATURE2_HTM_NOSC);
+#else
+	printf("PPC_FEATURE2_HTM_NOSC not defined, can't check AT_HWCAP2\n");
+	return false;
+#endif
+}
+
 int tm_syscall(void)
 {
 	unsigned count = 0;
 	struct timeval end, now;
 
-	SKIP_IF(!((long)get_auxv_entry(AT_HWCAP2)
-		  & PPC_FEATURE2_HTM_NOSC));
+	SKIP_IF(!have_htm_nosc());
+
 	setbuf(stdout, NULL);
 
 	printf("Testing transactional syscalls for %d seconds...\n", TEST_DURATION);
