Merge tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
3719a04a · Linus Torvalds <[email protected]> · 2025-06-04 11:26:17 -07:00
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and
has been fixed by other commits (Lukas Wunner)
Resource management:
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
and unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
and related flags since all uses have been removed (Philipp
Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid',
i.e., their behavior no longer depends on whether
pcim_enable_device or pci_enable_device() was used, and remove
related code (Philipp Stanner)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
Error handling:
- Log the DPC Error Source ID only when it's actually valid (when
ERR_FATAL or ERR_NONFATAL was received from a downstream device)
and decode into bus/device/function (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages
use the same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
Errors (Karolina Stolarek)
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and
RCU stall warnings (Jon Pan-Doh)
Power management:
- Increment PM usage counter when probing reset methods so we don't
try to read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
Power control:
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
the filename paths. Retain old deprecated symbols for
compatibility, except for the pwrctrl slot driver
(PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian
Norris)
Bandwidth control:
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
flag (Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may
have changed (Ilpo Järvinen)
PCIe native device hotplug:
- Ignore Presence Detect Changed caused by DPC.
pciehp already ignores Link Down/Up events caused by DPC, but on
slots using in-band presence detect, DPC causes a spurious Presence
Detect Changed event (Lukas Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset.
On hotplug ports using in-band presence detect, the reset causes a
Presence Detect Changed event, which mistakenly caused teardown and
re-enumeration of the device. Drivers may need to annotate code
that resets their device (Lukas Wunner)
Virtualization:
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS
but don't allow peer-to-peer transactions between Root Ports; the
quirk allows each Root Port to be in a separate IOMMU group (Huacai
Chen)
Endpoint framework:
- For fixed-size BARs, retain both the actual size and the possibly
larger size allocated to accommodate iATU alignment requirements
(Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space
than needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence
endpoint controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
Common host controller library:
- Convert pci-host-common to a library so platforms that don't need
native host controller drivers don't need to include these helper
functions (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc
Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
varying capabilities (Marc Zyngier)
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Add T602x PCIe support (Hector Martin)
- Directly set/clear INTx mask bits because T602x dropped the
accessors that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate
T602x, which moves them around; retain default offsets for existing
DTs that lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe
because we're allowed to sleep there (Hector Martin)
Cadence PCIe controller driver:
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow
(Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
Freescale i.MX6 PCIe controller driver:
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
(Richard Zhu)
- Remove redundant dw_pcie_wait_for_link() from
imx_pcie_start_link(); since the DWC core does this, imx6 only
needs it when retraining for a faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
some cases, the controller can't exit 'L23 Ready' through Beacon or
PERST# deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
GT/s, causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
Mobiveil PCIe controller driver:
- Return bool (not int) for link-up check in
mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
Zhang)
NVIDIA Tegra194 PCIe controller driver:
- Create debugfs directory for 'aspm_state_cnt' only when
CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
Zhang)
Qualcomm PCIe controller driver:
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT
lacks 'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for
8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
Renesas R-Car PCIe controller driver:
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Reorder rockchip_pci_core_rsts because
reset_control_bulk_deassert() deasserts in reverse order, to fix a
link training regression (Jensen Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas
Cassel)
Rockchip DesignWare PCIe controller driver:
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the
link is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
for Root Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
resets non-sticky registers (Shawn Lin)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
Synopsys DesignWare PCIe controller driver:
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
more robust; this will not affect the intended link width if all
lanes are functional (Wenbin Yao)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up()
and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
tegra194, uniphier, visconti (Hans Zhang)
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures
in some configs (Arnd Bergmann)
Device tree bindings:
- Add qcom DT binding for 'global' interrupt (PCIe controller and
link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
Sadhasivam)
- Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)
- Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)
- Correct indentation and style of examples in brcm,stb-pcie,
cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
(Krzysztof Kozlowski)
- Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
armada8k from text to schema DT bindings (Rob Herring)
- Remove obsolete .txt DT bindings for content that has been moved to
schemas (Rob Herring)
- Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
and IPQ9574 (Varadarajan Narayanan)
- Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)
- Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
PolarFire may be configured that way (Conor Dooley)
Miscellaneous:
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar
files (Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency
on MMU to simplify build testing and avoid inadvertent build
regressions (Arnd Bergmann)
- Update Krzysztof Wilczyński's email address in MAINTAINERS
(Krzysztof Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS
(Manivannan Sadhasivam)"
* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
MAINTAINERS: Update Manivannan Sadhasivam email address
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI: cadence: Remove duplicate message code definitions
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
...
- Commit
- 3719a04a80caf660f899a462cd8f3973bcfa676e
- Parents
- 1af80d00 · 3de91486
Merge commit. Changes below are compared with the first parent: 1af80d00.
Changes
148 files changed · +3402 −2221
Only the first 600 diff lines are shown. Download the complete patch.
diff --git a/.mailmap b/.mailmap
index 9ad9869..0f2fe42 100644
--- a/.mailmap
+++ b/.mailmap
Documentation/ABI/testing/debugfs-pcie-ptm
View file
diff --git a/Documentation/ABI/testing/debugfs-pcie-ptm b/Documentation/ABI/testing/debugfs-pcie-ptm
new file mode 100644
index 0000000..602d413
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-pcie-ptm
@@ -0,0 +1,70 @@
+What: /sys/kernel/debug/pcie_ptm_*/local_clock
+Date: May 2025
+Description:
+ (RO) PTM local clock in nanoseconds. Applicable for both Root
+ Complex and Endpoint controllers.
+
+What: /sys/kernel/debug/pcie_ptm_*/master_clock
+Date: May 2025
+Description:
+ (RO) PTM master clock in nanoseconds. Applicable only for
+ Endpoint controllers.
+
+What: /sys/kernel/debug/pcie_ptm_*/t1
+Date: May 2025
+Description:
+ (RO) PTM T1 timestamp in nanoseconds. Applicable only for
+ Endpoint controllers.
+
+What: /sys/kernel/debug/pcie_ptm_*/t2
+Date: May 2025
+Description:
+ (RO) PTM T2 timestamp in nanoseconds. Applicable only for
+ Root Complex controllers.
+
+What: /sys/kernel/debug/pcie_ptm_*/t3
+Date: May 2025
+Description:
+ (RO) PTM T3 timestamp in nanoseconds. Applicable only for
+ Root Complex controllers.
+
+What: /sys/kernel/debug/pcie_ptm_*/t4
+Date: May 2025
+Description:
+ (RO) PTM T4 timestamp in nanoseconds. Applicable only for
+ Endpoint controllers.
+
+What: /sys/kernel/debug/pcie_ptm_*/context_update
+Date: May 2025
+Description:
+ (RW) Control the PTM context update mode. Applicable only for
+ Endpoint controllers.
+
+ Following values are supported:
+
+ * auto = PTM context auto update trigger for every 10ms
+
+ * manual = PTM context manual update. Writing 'manual' to this
+ file triggers PTM context update (default)
+
+What: /sys/kernel/debug/pcie_ptm_*/context_valid
+Date: May 2025
+Description:
+ (RW) Control the PTM context validity (local clock timing).
+ Applicable only for Root Complex controllers. PTM context is
+ invalidated by hardware if the Root Complex enters low power
+ mode or changes link frequency.
+
+ Following values are supported:
+
+ * 0 = PTM context invalid (default)
+
+ * 1 = PTM context valid
Documentation/ABI/testing/sysfs-bus-pci-devices-aer
View file
diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer
similarity index 84%
rename from Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
rename to Documentation/ABI/testing/sysfs-bus-pci-devices-aer
index d1f67bb..5ed2845 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
+++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer
@@ -117,3 +117,47 @@ Date: July 2018
KernelVersion: 4.19.0
Description: Total number of ERR_NONFATAL messages reported to rootport.
+
+PCIe AER ratelimits
+-------------------
+
+These attributes show up under all the devices that are AER capable.
+They represent configurable ratelimits of logs per error type.
+
+See Documentation/PCI/pcieaer-howto.rst for more info on ratelimits.
+
+What: /sys/bus/pci/devices/<dev>/aer/correctable_ratelimit_interval_ms
+Date: May 2025
+KernelVersion: 6.16.0
+Description: Writing 0 disables AER correctable error log ratelimiting.
+ Writing a positive value sets the ratelimit interval in ms.
+ Default is DEFAULT_RATELIMIT_INTERVAL (5000 ms).
+
+What: /sys/bus/pci/devices/<dev>/aer/correctable_ratelimit_burst
+Date: May 2025
+KernelVersion: 6.16.0
+Description: Ratelimit burst for correctable error logs. Writing a value
+ changes the number of errors (burst) allowed per interval
+ before ratelimiting. Reading gets the current ratelimit
+ burst. Default is DEFAULT_RATELIMIT_BURST (10).
+
+What: /sys/bus/pci/devices/<dev>/aer/nonfatal_ratelimit_interval_ms
+Date: May 2025
+KernelVersion: 6.16.0
+Description: Writing 0 disables AER non-fatal uncorrectable error log
+ ratelimiting. Writing a positive value sets the ratelimit
+ interval in ms. Default is DEFAULT_RATELIMIT_INTERVAL
+ (5000 ms).
+
+What: /sys/bus/pci/devices/<dev>/aer/nonfatal_ratelimit_burst
+Date: May 2025
+KernelVersion: 6.16.0
+Description: Ratelimit burst for non-fatal uncorrectable error logs.
+ Writing a value changes the number of errors (burst)
+ allowed per interval before ratelimiting. Reading gets the
+ current ratelimit burst. Default is DEFAULT_RATELIMIT_BURST
+ (10).
Documentation/PCI/controller/index.rst
View file
diff --git a/Documentation/PCI/controller/index.rst b/Documentation/PCI/controller/index.rst
new file mode 100644
index 0000000..c2ce9cc
--- /dev/null
+++ b/Documentation/PCI/controller/index.rst
@@ -0,0 +1,10 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================================
+PCI Native Host Bridge and Endpoint Drivers
+===========================================
+
+.. toctree::
+ :maxdepth: 2
+
+ rcar-pcie-firmware
Documentation/PCI/controller/rcar-pcie-firmware.rst
View file
diff --git a/Documentation/PCI/controller/rcar-pcie-firmware.rst b/Documentation/PCI/controller/rcar-pcie-firmware.rst
new file mode 100644
index 0000000..67d3bf6
--- /dev/null
+++ b/Documentation/PCI/controller/rcar-pcie-firmware.rst
@@ -0,0 +1,32 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================================================
+Firmware of PCIe controller for Renesas R-Car V4H
+=================================================
+
+Renesas R-Car V4H (r8a779g0) has a PCIe controller, requiring a specific
+firmware download during startup.
+
+However, Renesas currently cannot distribute the firmware free of charge.
+
+The firmware file "104_PCIe_fw_addr_data_ver1.05.txt" (note that the file name
+might be different between different datasheet revisions) can be found in the
+datasheet encoded as text, and as such, the file's content must be converted
+back to binary form. This can be achieved using the following example script:
+
+.. code-block:: sh
+
+ $ awk '/^\s*0x[0-9A-Fa-f]{4}\s+0x[0-9A-Fa-f]{4}/ { print substr($2,5,2) substr($2,3,2) }' \
+ 104_PCIe_fw_addr_data_ver1.05.txt | \
+ xxd -p -r > rcar_gen4_pcie.bin
+
+Once the text content has been converted into a binary firmware file, verify
+its checksum as follows:
+
+.. code-block:: sh
+
+ $ sha1sum rcar_gen4_pcie.bin
+ 1d0bd4b189b4eb009f5d564b1f93a79112994945 rcar_gen4_pcie.bin
+
+The resulting binary file called "rcar_gen4_pcie.bin" should be placed in the
+"/lib/firmware" directory before the driver runs.
Documentation/PCI/endpoint/pci-nvme-function.rst
View file
diff --git a/Documentation/PCI/endpoint/pci-nvme-function.rst b/Documentation/PCI/endpoint/pci-nvme-function.rst
index df57b8e..a680153 100644
--- a/Documentation/PCI/endpoint/pci-nvme-function.rst
+++ b/Documentation/PCI/endpoint/pci-nvme-function.rst
@@ -8,6 +8,6 @@ PCI NVMe Function
The PCI NVMe endpoint function implements a PCI NVMe controller using the NVMe
subsystem target core code. The driver for this function resides with the NVMe
-subsystem as drivers/nvme/target/nvmet-pciep.c.
+subsystem as drivers/nvme/target/pci-epf.c.
See Documentation/nvme/nvme-pci-endpoint-target.rst for more details.
diff --git a/Documentation/PCI/index.rst b/Documentation/PCI/index.rst
index 5e7c4e6..5d720d2 100644
--- a/Documentation/PCI/index.rst
+++ b/Documentation/PCI/index.rst
@@ -17,5 +17,6 @@ PCI Bus Subsystem
pci-error-recovery
pcieaer-howto
endpoint/index
+ controller/index
boot-interrupts
tph
diff --git a/Documentation/PCI/pcieaer-howto.rst b/Documentation/PCI/pcieaer-howto.rst
index f013f3b..4b71e2f 100644
--- a/Documentation/PCI/pcieaer-howto.rst
+++ b/Documentation/PCI/pcieaer-howto.rst
@@ -85,12 +85,27 @@ In the example, 'Requester ID' means the ID of the device that sent
the error message to the Root Port. Please refer to PCIe specs for other
fields.
+AER Ratelimits
+--------------
+
+Since error messages can be generated for each transaction, we may see
+large volumes of errors reported. To prevent spammy devices from flooding
+the console/stalling execution, messages are throttled by device and error
+type (correctable vs. non-fatal uncorrectable). Fatal errors, including
+DPC errors, are not ratelimited.
+
+AER uses the default ratelimit of DEFAULT_RATELIMIT_BURST (10 events) over
+DEFAULT_RATELIMIT_INTERVAL (5 seconds).
+
+Ratelimits are exposed in the form of sysfs attributes and configurable.
+See Documentation/ABI/testing/sysfs-bus-pci-devices-aer.
+
AER Statistics / Counters
-------------------------
When PCIe AER errors are captured, the counters / statistics are also exposed
in the form of sysfs attributes which are documented at
-Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
+Documentation/ABI/testing/sysfs-bus-pci-devices-aer.
Developer Guide
===============
Documentation/devicetree/bindings/pci/apple,pcie.yaml
View file
diff --git a/Documentation/devicetree/bindings/pci/apple,pcie.yaml b/Documentation/devicetree/bindings/pci/apple,pcie.yaml
index c8775f9..c0852be 100644
--- a/Documentation/devicetree/bindings/pci/apple,pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/apple,pcie.yaml
@@ -17,6 +17,10 @@ description: |
implements its root ports. But the ATU found on most DesignWare
PCIe host bridges is absent.
+ On systems derived from T602x, the PHY registers are in a region
+ separate from the port registers. In that case, there is one PHY
+ register range per port register range.
+
All root ports share a single ECAM space, but separate GPIOs are
used to take the PCI devices on those ports out of reset. Therefore
the standard "reset-gpios" and "max-link-speed" properties appear on
@@ -30,16 +34,18 @@ description: |
properties:
compatible:
- items:
- - enum:
- - apple,t8103-pcie
- - apple,t8112-pcie
- - apple,t6000-pcie
- - const: apple,pcie
+ oneOf:
+ - items:
+ - enum:
+ - apple,t8103-pcie
+ - apple,t8112-pcie
+ - apple,t6000-pcie
+ - const: apple,pcie
+ - const: apple,t6020-pcie
reg:
minItems: 3
- maxItems: 6
+ maxItems: 10
reg-names:
minItems: 3
@@ -50,6 +56,10 @@ properties:
- const: port1
- const: port2
- const: port3
+ - const: phy0
+ - const: phy1
+ - const: phy2
+ - const: phy3
ranges:
minItems: 2
@@ -98,6 +108,15 @@ allOf:
maxItems: 5
interrupts:
maxItems: 3
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: apple,t6020-pcie
+ then:
+ properties:
+ reg-names:
+ minItems: 10
examples:
- |
Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
View file
diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 29f0e1e..c4f9674 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -186,49 +186,48 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
scb {
- #address-cells = <2>;
- #size-cells = <1>;
- pcie0: pcie@7d500000 {
- compatible = "brcm,bcm2711-pcie";
- reg = <0x0 0x7d500000 0x9310>;
- device_type = "pci";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "pcie", "msi";
- interrupt-map-mask = <0x0 0x0 0x0 0x7>;
- interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH
- 0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH
- 0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH
- 0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-
- msi-parent = <&pcie0>;
- msi-controller;
- ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
- dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
- <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
- brcm,enable-ssc;
- brcm,scb-sizes = <0x0000000080000000 0x0000000080000000>;
-
- /* PCIe bridge, Root Port */
- pci@0,0 {
- #address-cells = <3>;
- #size-cells = <2>;
- reg = <0x0 0x0 0x0 0x0 0x0>;
- compatible = "pciclass,0604";
- device_type = "pci";
- vpcie3v3-supply = <&vreg7>;
- ranges;
-
- /* PCIe endpoint */
- pci-ep@0,0 {
- assigned-addresses =
- <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>;
- reg = <0x0 0x0 0x0 0x0 0x0>;
- compatible = "pci14e4,1688";
- };
- };
+ #address-cells = <2>;
+ #size-cells = <1>;
+ pcie0: pcie@7d500000 {
+ compatible = "brcm,bcm2711-pcie";
+ reg = <0x0 0x7d500000 0x9310>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie", "msi";
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH
+ 0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH
+ 0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH
+ 0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+
+ msi-parent = <&pcie0>;
+ msi-controller;
+ ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
+ dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
+ <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
+ brcm,enable-ssc;
+ brcm,scb-sizes = <0x0000000080000000 0x0000000080000000>;
+
+ /* PCIe bridge, Root Port */
+ pci@0,0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ compatible = "pciclass,0604";
+ device_type = "pci";
+ vpcie3v3-supply = <&vreg7>;
+ ranges;
+
+ /* PCIe endpoint */
+ pci-ep@0,0 {
+ assigned-addresses = <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ compatible = "pci14e4,1688";
+ };
};
+ };
};
Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
View file
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
index 98651ab..8735293 100644
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
@@ -37,14 +37,14 @@ examples:
#size-cells = <2>;
pcie-ep@fc000000 {
- compatible = "cdns,cdns-pcie-ep";
- reg = <0x0 0xfc000000 0x0 0x01000000>,
- <0x0 0x80000000 0x0 0x40000000>;
- reg-names = "reg", "mem";
- cdns,max-outbound-regions = <16>;
- max-functions = /bits/ 8 <8>;
- phys = <&pcie_phy0>;
- phy-names = "pcie-phy";
+ compatible = "cdns,cdns-pcie-ep";
+ reg = <0x0 0xfc000000 0x0 0x01000000>,
+ <0x0 0x80000000 0x0 0x40000000>;
+ reg-names = "reg", "mem";
+ cdns,max-outbound-regions = <16>;
+ max-functions = /bits/ 8 <8>;
+ phys = <&pcie_phy0>;
+ phy-names = "pcie-phy";
};
};
...
Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml
View file
diff --git a/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml
index 730e63f..b19f61a 100644
--- a/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml
@@ -53,17 +53,17 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
pcie-ep@37000000 {
- compatible = "intel,keembay-pcie-ep";
- reg = <0x37000000 0x00001000>,
- <0x37100000 0x00001000>,
- <0x37300000 0x00001000>,
- <0x36000000 0x01000000>,
- <0x37800000 0x00000200>;
- reg-names = "dbi", "dbi2", "atu", "addr_space", "apb";
- interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "pcie", "pcie_ev", "pcie_err", "pcie_mem_access";
- num-lanes = <2>;
+ compatible = "intel,keembay-pcie-ep";
+ reg = <0x37000000 0x00001000>,
+ <0x37100000 0x00001000>,
+ <0x37300000 0x00001000>,
+ <0x36000000 0x01000000>,
+ <0x37800000 0x00000200>;
+ reg-names = "dbi", "dbi2", "atu", "addr_space", "apb";
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie", "pcie_ev", "pcie_err", "pcie_mem_access";
+ num-lanes = <2>;
};
Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml
View file
diff --git a/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml
index 1fd5575..dd71e3d 100644
--- a/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml
@@ -75,23 +75,23 @@ examples:
#define KEEM_BAY_A53_PCIE
#define KEEM_BAY_A53_AUX_PCIE
pcie@37000000 {
- compatible = "intel,keembay-pcie";
- reg = <0x37000000 0x00001000>,
- <0x37300000 0x00001000>,
- <0x36e00000 0x00200000>,
- <0x37800000 0x00000200>;
- reg-names = "dbi", "atu", "config", "apb";
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- ranges = <0x02000000 0 0x36000000 0x36000000 0 0x00e00000>;
- interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "pcie", "pcie_ev", "pcie_err";
- clocks = <&scmi_clk KEEM_BAY_A53_PCIE>,
- <&scmi_clk KEEM_BAY_A53_AUX_PCIE>;
- clock-names = "master", "aux";
- reset-gpios = <&pca2 9 GPIO_ACTIVE_LOW>;
- num-lanes = <2>;
+ compatible = "intel,keembay-pcie";
+ reg = <0x37000000 0x00001000>,
+ <0x37300000 0x00001000>,
+ <0x36e00000 0x00200000>,
+ <0x37800000 0x00000200>;
+ reg-names = "dbi", "atu", "config", "apb";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x02000000 0 0x36000000 0x36000000 0 0x00e00000>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie", "pcie_ev", "pcie_err";
+ clocks = <&scmi_clk KEEM_BAY_A53_PCIE>,
+ <&scmi_clk KEEM_BAY_A53_AUX_PCIE>;
+ clock-names = "master", "aux";
+ reset-gpios = <&pca2 9 GPIO_ACTIVE_LOW>;
+ num-lanes = <2>;
};
Documentation/devicetree/bindings/pci/marvell,armada8k-pcie.yaml
View file
diff --git a/Documentation/devicetree/bindings/pci/marvell,armada8k-pcie.yaml b/Documentation/devicetree/bindings/pci/marvell,armada8k-pcie.yaml
new file mode 100644
index 0000000..f3ba923
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/marvell,armada8k-pcie.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/marvell,armada8k-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 7K/8K PCIe interface
+
+maintainers:
+
+description:
+ This PCIe host controller is based on the Synopsys DesignWare PCIe IP.
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - marvell,armada8k-pcie
+ required:
+ - compatible
+
+allOf:
+ - $ref: snps,dw-pcie.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - marvell,armada8k-pcie
+ - const: snps,dw-pcie
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: ctrl
+ - const: config
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: core
+ - const: reg
+
+ interrupts:
+ maxItems: 1
+
+ msi-parent:
+ maxItems: 1
+
+ phys:
+ minItems: 1
This diff is incomplete. Download the complete patch.