projects/linux·commit 388f7ef7

Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

388f7ef7 · Linus Torvalds <[email protected]> · 2005-11-11 09:26:39 -08:00

Commit
388f7ef720a982f49925e7b4e96f216f208f8c03
Parents
d5eebf42 · 560c22fe

Merge commit. Changes below are compared with the first parent: d5eebf42.

Changes

19 files changed · +850 −681

Only the first 600 diff lines are shown. Download the complete patch.

drivers/net/Kconfig

View file
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5c69d57..ebd7313 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -812,7 +812,7 @@ config SMC91X
tristate "SMC 91C9x/91C1xxx support"
select CRC32
select MII
- depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH)
+ depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00)
help
This is a driver for SMC's 91x series of Ethernet chipsets,
including the SMC91C94 and the SMC91C111. Say Y if you want it

drivers/net/forcedeth.c

View file
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 22aec6e..525624f 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -80,7 +80,7 @@
* into nv_close, otherwise reenabling for wol can
* cause DMA to kfree'd memory.
* 0.31: 14 Nov 2004: ethtool support for getting/setting link
- * capabilities.
+ * capabilities.
* 0.32: 16 Apr 2005: RX_ERROR4 handling added.
* 0.33: 16 May 2005: Support for MCP51 added.
* 0.34: 18 Jun 2005: Add DEV_NEED_LINKTIMER to all nForce nics.
@@ -89,14 +89,17 @@
* 0.37: 10 Jul 2005: Additional ethtool support, cleanup of pci id list
* 0.38: 16 Jul 2005: tx irq rewrite: Use global flags instead of
* per-packet flags.
- * 0.39: 18 Jul 2005: Add 64bit descriptor support.
- * 0.40: 19 Jul 2005: Add support for mac address change.
- * 0.41: 30 Jul 2005: Write back original MAC in nv_close instead
+ * 0.39: 18 Jul 2005: Add 64bit descriptor support.
+ * 0.40: 19 Jul 2005: Add support for mac address change.
+ * 0.41: 30 Jul 2005: Write back original MAC in nv_close instead
* of nv_remove
- * 0.42: 06 Aug 2005: Fix lack of link speed initialization
+ * 0.42: 06 Aug 2005: Fix lack of link speed initialization
* in the second (and later) nv_open call
- * 0.43: 10 Aug 2005: Add support for tx checksum.
- * 0.44: 20 Aug 2005: Add support for scatter gather and segmentation.
+ * 0.43: 10 Aug 2005: Add support for tx checksum.
+ * 0.44: 20 Aug 2005: Add support for scatter gather and segmentation.
+ * 0.45: 18 Sep 2005: Remove nv_stop/start_rx from every link check
+ * 0.46: 20 Oct 2005: Add irq optimization modes.
+ * 0.47: 26 Oct 2005: Add phyaddr 0 in phy scan.
*
* Known bugs:
* We suspect that on some hardware no TX done interrupts are generated.
@@ -108,7 +111,7 @@
* DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few
* superfluous timer interrupts from the nic.
*/
-#define FORCEDETH_VERSION "0.44"
+#define FORCEDETH_VERSION "0.47"
#define DRV_NAME "forcedeth"
#include <linux/module.h>
@@ -163,7 +166,8 @@ enum {
#define NVREG_IRQ_LINK 0x0040
#define NVREG_IRQ_TX_ERROR 0x0080
#define NVREG_IRQ_TX1 0x0100
-#define NVREG_IRQMASK_WANTED 0x00df
+#define NVREG_IRQMASK_THROUGHPUT 0x00df
+#define NVREG_IRQMASK_CPU 0x0040
#define NVREG_IRQ_UNKNOWN (~(NVREG_IRQ_RX_ERROR|NVREG_IRQ_RX|NVREG_IRQ_RX_NOBUF|NVREG_IRQ_TX_ERR| \
NVREG_IRQ_TX_OK|NVREG_IRQ_TIMER|NVREG_IRQ_LINK|NVREG_IRQ_TX_ERROR| \
@@ -177,7 +181,8 @@ enum {
* NVREG_POLL_DEFAULT=97 would result in an interval length of 1 ms
*/
NvRegPollingInterval = 0x00c,
-#define NVREG_POLL_DEFAULT 970
+#define NVREG_POLL_DEFAULT_THROUGHPUT 970
+#define NVREG_POLL_DEFAULT_CPU 13
NvRegMisc1 = 0x080,
#define NVREG_MISC1_HD 0x02
#define NVREG_MISC1_FORCE 0x3b0f3c
@@ -538,6 +543,25 @@ struct fe_priv {
*/
static int max_interrupt_work = 5;
+/*
+ * Optimization can be either throuput mode or cpu mode
+ *
+ * Throughput Mode: Every tx and rx packet will generate an interrupt.
+ * CPU Mode: Interrupts are controlled by a timer.
+ */
+#define NV_OPTIMIZATION_MODE_THROUGHPUT 0
+#define NV_OPTIMIZATION_MODE_CPU 1
+static int optimization_mode = NV_OPTIMIZATION_MODE_THROUGHPUT;
+
+/*
+ * Poll interval for timer irq
+ *
+ * This interval determines how frequent an interrupt is generated.
+ * The is value is determined by [(time_in_micro_secs * 100) / (2^10)]
+ * Min = 0, and Max = 65535
+ */
+static int poll_interval = -1;
+
static inline struct fe_priv *get_nvpriv(struct net_device *dev)
{
return netdev_priv(dev);
@@ -1328,67 +1352,71 @@ static void nv_rx_process(struct net_device *dev)
if (!(Flags & NV_RX_DESCRIPTORVALID))
goto next_pkt;
- if (Flags & NV_RX_MISSEDFRAME) {
- np->stats.rx_missed_errors++;
- np->stats.rx_errors++;
- goto next_pkt;
- }
- if (Flags & (NV_RX_ERROR1|NV_RX_ERROR2|NV_RX_ERROR3)) {
- np->stats.rx_errors++;
- goto next_pkt;
- }
- if (Flags & NV_RX_CRCERR) {
- np->stats.rx_crc_errors++;
- np->stats.rx_errors++;
- goto next_pkt;
- }
- if (Flags & NV_RX_OVERFLOW) {
- np->stats.rx_over_errors++;
- np->stats.rx_errors++;
- goto next_pkt;
- }
- if (Flags & NV_RX_ERROR4) {
- len = nv_getlen(dev, np->rx_skbuff[i]->data, len);
- if (len < 0) {
+ if (Flags & NV_RX_ERROR) {
+ if (Flags & NV_RX_MISSEDFRAME) {
+ np->stats.rx_missed_errors++;
np->stats.rx_errors++;
goto next_pkt;
}
- }
- /* framing errors are soft errors. */
- if (Flags & NV_RX_FRAMINGERR) {
- if (Flags & NV_RX_SUBSTRACT1) {
- len--;
+ if (Flags & (NV_RX_ERROR1|NV_RX_ERROR2|NV_RX_ERROR3)) {
+ np->stats.rx_errors++;
+ goto next_pkt;
+ }
+ if (Flags & NV_RX_CRCERR) {
+ np->stats.rx_crc_errors++;
+ np->stats.rx_errors++;
+ goto next_pkt;
+ }
+ if (Flags & NV_RX_OVERFLOW) {
+ np->stats.rx_over_errors++;
+ np->stats.rx_errors++;
+ goto next_pkt;
+ }
+ if (Flags & NV_RX_ERROR4) {
+ len = nv_getlen(dev, np->rx_skbuff[i]->data, len);
+ if (len < 0) {
+ np->stats.rx_errors++;
+ goto next_pkt;
+ }
+ }
+ /* framing errors are soft errors. */
+ if (Flags & NV_RX_FRAMINGERR) {
+ if (Flags & NV_RX_SUBSTRACT1) {
+ len--;
+ }
}
}
} else {
if (!(Flags & NV_RX2_DESCRIPTORVALID))
goto next_pkt;
- if (Flags & (NV_RX2_ERROR1|NV_RX2_ERROR2|NV_RX2_ERROR3)) {
- np->stats.rx_errors++;
- goto next_pkt;
- }
- if (Flags & NV_RX2_CRCERR) {
- np->stats.rx_crc_errors++;
- np->stats.rx_errors++;
- goto next_pkt;
- }
- if (Flags & NV_RX2_OVERFLOW) {
- np->stats.rx_over_errors++;
- np->stats.rx_errors++;
- goto next_pkt;
- }
- if (Flags & NV_RX2_ERROR4) {
- len = nv_getlen(dev, np->rx_skbuff[i]->data, len);
- if (len < 0) {
+ if (Flags & NV_RX2_ERROR) {
+ if (Flags & (NV_RX2_ERROR1|NV_RX2_ERROR2|NV_RX2_ERROR3)) {
np->stats.rx_errors++;
goto next_pkt;
}
- }
- /* framing errors are soft errors */
- if (Flags & NV_RX2_FRAMINGERR) {
- if (Flags & NV_RX2_SUBSTRACT1) {
- len--;
+ if (Flags & NV_RX2_CRCERR) {
+ np->stats.rx_crc_errors++;
+ np->stats.rx_errors++;
+ goto next_pkt;
+ }
+ if (Flags & NV_RX2_OVERFLOW) {
+ np->stats.rx_over_errors++;
+ np->stats.rx_errors++;
+ goto next_pkt;
+ }
+ if (Flags & NV_RX2_ERROR4) {
+ len = nv_getlen(dev, np->rx_skbuff[i]->data, len);
+ if (len < 0) {
+ np->stats.rx_errors++;
+ goto next_pkt;
+ }
+ }
+ /* framing errors are soft errors */
+ if (Flags & NV_RX2_FRAMINGERR) {
+ if (Flags & NV_RX2_SUBSTRACT1) {
+ len--;
+ }
}
}
Flags &= NV_RX2_CHECKSUMMASK;
@@ -1612,6 +1640,17 @@ static void nv_set_multicast(struct net_device *dev)
spin_unlock_irq(&np->lock);
}
+/**
+ * nv_update_linkspeed: Setup the MAC according to the link partner
+ * @dev: Network device to be configured
+ *
+ * The function queries the PHY and checks if there is a link partner.
+ * If yes, then it sets up the MAC accordingly. Otherwise, the MAC is
+ * set to 10 MBit HD.
+ *
+ * The function returns 0 if there is no link partner and 1 if there is
+ * a good link partner.
+ */
static int nv_update_linkspeed(struct net_device *dev)
{
struct fe_priv *np = netdev_priv(dev);
@@ -1751,13 +1790,11 @@ set_speed:
static void nv_linkchange(struct net_device *dev)
{
if (nv_update_linkspeed(dev)) {
- if (netif_carrier_ok(dev)) {
- nv_stop_rx(dev);
- } else {
+ if (!netif_carrier_ok(dev)) {
netif_carrier_on(dev);
printk(KERN_INFO "%s: link up.\n", dev->name);
+ nv_start_rx(dev);
}
- nv_start_rx(dev);
} else {
if (netif_carrier_ok(dev)) {
netif_carrier_off(dev);
@@ -1799,22 +1836,18 @@ static irqreturn_t nv_nic_irq(int foo, void *data, struct pt_regs *regs)
if (!(events & np->irqmask))
break;
- if (events & (NVREG_IRQ_TX1|NVREG_IRQ_TX_OK|NVREG_IRQ_TX_ERROR|NVREG_IRQ_TX_ERR)) {
+ spin_lock(&np->lock);
+ nv_tx_done(dev);
+ spin_unlock(&np->lock);
+
+ nv_rx_process(dev);
+ if (nv_alloc_rx(dev)) {
spin_lock(&np->lock);
- nv_tx_done(dev);
+ if (!np->in_shutdown)
+ mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
spin_unlock(&np->lock);
}
-
- if (events & (NVREG_IRQ_RX_ERROR|NVREG_IRQ_RX|NVREG_IRQ_RX_NOBUF)) {
- nv_rx_process(dev);
- if (nv_alloc_rx(dev)) {
- spin_lock(&np->lock);
- if (!np->in_shutdown)
- mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
- spin_unlock(&np->lock);
- }
- }
-
+
if (events & NVREG_IRQ_LINK) {
spin_lock(&np->lock);
nv_link_irq(dev);
@@ -2216,7 +2249,14 @@ static int nv_open(struct net_device *dev)
writel(NVREG_RNDSEED_FORCE | (i&NVREG_RNDSEED_MASK), base + NvRegRandomSeed);
writel(NVREG_UNKSETUP1_VAL, base + NvRegUnknownSetupReg1);
writel(NVREG_UNKSETUP2_VAL, base + NvRegUnknownSetupReg2);
- writel(NVREG_POLL_DEFAULT, base + NvRegPollingInterval);
+ if (poll_interval == -1) {
+ if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT)
+ writel(NVREG_POLL_DEFAULT_THROUGHPUT, base + NvRegPollingInterval);
+ else
+ writel(NVREG_POLL_DEFAULT_CPU, base + NvRegPollingInterval);
+ }
+ else
+ writel(poll_interval & 0xFFFF, base + NvRegPollingInterval);
writel(NVREG_UNKSETUP6_VAL, base + NvRegUnknownSetupReg6);
writel((np->phyaddr << NVREG_ADAPTCTL_PHYSHIFT)|NVREG_ADAPTCTL_PHYVALID|NVREG_ADAPTCTL_RUNNING,
base + NvRegAdapterControl);
@@ -2501,7 +2541,11 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
} else {
np->tx_flags = NV_TX2_VALID;
}
- np->irqmask = NVREG_IRQMASK_WANTED;
+ if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT)
+ np->irqmask = NVREG_IRQMASK_THROUGHPUT;
+ else
+ np->irqmask = NVREG_IRQMASK_CPU;
+
if (id->driver_data & DEV_NEED_TIMERIRQ)
np->irqmask |= NVREG_IRQ_TIMER;
if (id->driver_data & DEV_NEED_LINKTIMER) {
@@ -2514,16 +2558,17 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
}
/* find a suitable phy */
- for (i = 1; i < 32; i++) {
+ for (i = 1; i <= 32; i++) {
int id1, id2;
+ int phyaddr = i & 0x1F;
spin_lock_irq(&np->lock);
- id1 = mii_rw(dev, i, MII_PHYSID1, MII_READ);
+ id1 = mii_rw(dev, phyaddr, MII_PHYSID1, MII_READ);
spin_unlock_irq(&np->lock);
if (id1 < 0 || id1 == 0xffff)
continue;
spin_lock_irq(&np->lock);
- id2 = mii_rw(dev, i, MII_PHYSID2, MII_READ);
+ id2 = mii_rw(dev, phyaddr, MII_PHYSID2, MII_READ);
spin_unlock_irq(&np->lock);
if (id2 < 0 || id2 == 0xffff)
continue;
@@ -2531,23 +2576,19 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
id1 = (id1 & PHYID1_OUI_MASK) << PHYID1_OUI_SHFT;
id2 = (id2 & PHYID2_OUI_MASK) >> PHYID2_OUI_SHFT;
dprintk(KERN_DEBUG "%s: open: Found PHY %04x:%04x at address %d.\n",
- pci_name(pci_dev), id1, id2, i);
- np->phyaddr = i;
+ pci_name(pci_dev), id1, id2, phyaddr);
+ np->phyaddr = phyaddr;
np->phy_oui = id1 | id2;
break;
}
- if (i == 32) {
- /* PHY in isolate mode? No phy attached and user wants to
- * test loopback? Very odd, but can be correct.
- */
+ if (i == 33) {
printk(KERN_INFO "%s: open: Could not find a valid PHY.\n",
- pci_name(pci_dev));
- }
-
- if (i != 32) {
- /* reset it */
- phy_init(dev);
+ pci_name(pci_dev));
+ goto out_freering;
}
+
+ /* reset it */
+ phy_init(dev);
/* set default link speed settings */
np->linkspeed = NVREG_LINKSPEED_FORCE|NVREG_LINKSPEED_10;
@@ -2689,6 +2730,10 @@ static void __exit exit_nic(void)
module_param(max_interrupt_work, int, 0);
MODULE_PARM_DESC(max_interrupt_work, "forcedeth maximum events handled per interrupt");
+module_param(optimization_mode, int, 0);
+MODULE_PARM_DESC(optimization_mode, "In throughput mode (0), every tx & rx packet will generate an interrupt. In CPU mode (1), interrupts are controlled by a timer.");
+module_param(poll_interval, int, 0);
+MODULE_PARM_DESC(poll_interval, "Interval determines how frequent timer interrupt is generated by [(time_in_micro_secs * 100) / (2^10)]. Min is 0 and Max is 65535.");
MODULE_AUTHOR("Manfred Spraul <[email protected]>");
MODULE_DESCRIPTION("Reverse Engineered nForce ethernet driver");

drivers/net/gianfar_mii.c

View file
diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c
index 7263395..9544279 100644
--- a/drivers/net/gianfar_mii.c
+++ b/drivers/net/gianfar_mii.c
@@ -133,7 +133,7 @@ int gfar_mdio_probe(struct device *dev)
if (NULL == dev)
return -EINVAL;
- new_bus = kmalloc(sizeof(struct mii_bus), GFP_KERNEL);
+ new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
if (NULL == new_bus)
return -ENOMEM;

drivers/net/gt96100eth.c

View file
diff --git a/drivers/net/gt96100eth.c b/drivers/net/gt96100eth.c
index 666cfbb..5958a63 100644
--- a/drivers/net/gt96100eth.c
+++ b/drivers/net/gt96100eth.c
@@ -72,8 +72,6 @@ static void dump_tx_desc(int dbg_lvl, struct net_device *dev, int i);
static void dump_rx_desc(int dbg_lvl, struct net_device *dev, int i);
static void dump_skb(int dbg_lvl, struct net_device *dev,
struct sk_buff *skb);
-static void dump_hw_addr(int dbg_lvl, struct net_device *dev,
- const char* pfx, unsigned char* addr_str);
static void update_stats(struct gt96100_private *gp);
static void abort(struct net_device *dev, u32 abort_bits);
static void hard_stop(struct net_device *dev);
@@ -334,13 +332,13 @@ dump_MII(int dbg_lvl, struct net_device *dev)
static void
dump_hw_addr(int dbg_lvl, struct net_device *dev, const char* pfx,
- unsigned char* addr_str)
+ const char* func, unsigned char* addr_str)
{
int i;
char buf[100], octet[5];
if (dbg_lvl <= GT96100_DEBUG) {
- strcpy(buf, pfx);
+ sprintf(buf, pfx, func);
for (i = 0; i < 6; i++) {
sprintf(octet, "%2.2x%s",
addr_str[i], i<5 ? ":" : "\n");
@@ -708,7 +706,7 @@ static int __init gt96100_probe1(struct pci_dev *pci, int port_num)
info("%s found at 0x%x, irq %d\n",
chip_name(gp->chip_rev), gtif->iobase, gtif->irq);
- dump_hw_addr(0, dev, "HW Address ", dev->dev_addr);
+ dump_hw_addr(0, dev, "%s: HW Address ", __FUNCTION__, dev->dev_addr);
info("%s chip revision=%d\n", chip_name(gp->chip_rev), gp->chip_rev);
info("%s ethernet port %d\n", chip_name(gp->chip_rev), gp->port_num);
info("external PHY ID1=0x%04x, ID2=0x%04x\n", phy_id1, phy_id2);
@@ -1488,7 +1486,7 @@ gt96100_set_rx_mode(struct net_device *dev)
gt96100_add_hash_entry(dev, dev->dev_addr);
for (mcptr = dev->mc_list; mcptr; mcptr = mcptr->next) {
- dump_hw_addr(2, dev, __FUNCTION__ ": addr=",
+ dump_hw_addr(2, dev, "%s: addr=", __FUNCTION__,
mcptr->dmi_addr);
gt96100_add_hash_entry(dev, mcptr->dmi_addr);
}

drivers/net/ibmveth.c

View file
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index be191d8..ceb98fd 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -58,7 +58,7 @@
#include "ibmveth.h"
-#define DEBUG 1
+#undef DEBUG
#define ibmveth_printk(fmt, args...) \
printk(KERN_INFO "%s: " fmt, __FILE__, ## args)

drivers/net/saa9730.c

View file
diff --git a/drivers/net/saa9730.c b/drivers/net/saa9730.c
index 110e777..b2acedb 100644
--- a/drivers/net/saa9730.c
+++ b/drivers/net/saa9730.c
@@ -1,8 +1,8 @@
/*
- * Carsten Langgaard, [email protected]
- * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- *
- * ########################################################################
+ * Copyright (C) 2000, 2005 MIPS Technologies, Inc. All rights reserved.
+ * Authors: Carsten Langgaard <[email protected]>
+ * Maciej W. Rozycki <[email protected]>
+ * Copyright (C) 2004 Ralf Baechle <[email protected]>
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
@@ -17,15 +17,13 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
- * ########################################################################
- *
* SAA9730 ethernet driver.
*
* Changes:
- * Angelo Dell'Aera <[email protected]> : Conversion to the new PCI API (pci_driver).
- * Conversion to spinlocks.
- * Error handling fixes.
- *
+ * Angelo Dell'Aera <[email protected]> : Conversion to the new PCI API
+ * (pci_driver).
+ * Conversion to spinlocks.
+ * Error handling fixes.
*/
#include <linux/init.h>
@@ -36,8 +34,11 @@
#include <linux/skbuff.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
+#include <linux/types.h>
#include <asm/addrspace.h>
+#include <asm/io.h>
+
#include <asm/mips-boards/prom.h>
#include "saa9730.h"
@@ -51,8 +52,8 @@ int lan_saa9730_debug;
#define DRV_MODULE_NAME "saa9730"
static struct pci_device_id saa9730_pci_tbl[] = {
- { PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA9370,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
+ { PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA9730,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ 0, }
};
@@ -61,50 +62,48 @@ MODULE_DEVICE_TABLE(pci, saa9730_pci_tbl);
/* Non-zero only if the current card is a PCI with BIOS-set IRQ. */
static unsigned int pci_irq_line;
-#define INL(a) inl((unsigned long)a)
-#define OUTL(x,a) outl(x,(unsigned long)a)
-
static void evm_saa9730_enable_lan_int(struct lan_saa9730_private *lp)
{
- OUTL(INL(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
+ outl(readl(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
&lp->evm_saa9730_regs->InterruptBlock1);
- OUTL(INL(&lp->evm_saa9730_regs->InterruptStatus1) | EVM_LAN_INT,
+ outl(readl(&lp->evm_saa9730_regs->InterruptStatus1) | EVM_LAN_INT,
&lp->evm_saa9730_regs->InterruptStatus1);
- OUTL(INL(&lp->evm_saa9730_regs->InterruptEnable1) | EVM_LAN_INT |
+ outl(readl(&lp->evm_saa9730_regs->InterruptEnable1) | EVM_LAN_INT |
EVM_MASTER_EN, &lp->evm_saa9730_regs->InterruptEnable1);
}
+
static void evm_saa9730_disable_lan_int(struct lan_saa9730_private *lp)
{
- OUTL(INL(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
+ outl(readl(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
&lp->evm_saa9730_regs->InterruptBlock1);
- OUTL(INL(&lp->evm_saa9730_regs->InterruptEnable1) & ~EVM_LAN_INT,
+ outl(readl(&lp->evm_saa9730_regs->InterruptEnable1) & ~EVM_LAN_INT,
&lp->evm_saa9730_regs->InterruptEnable1);
}
static void evm_saa9730_clear_lan_int(struct lan_saa9730_private *lp)
{
- OUTL(EVM_LAN_INT, &lp->evm_saa9730_regs->InterruptStatus1);
+ outl(EVM_LAN_INT, &lp->evm_saa9730_regs->InterruptStatus1);
}
static void evm_saa9730_block_lan_int(struct lan_saa9730_private *lp)
{
- OUTL(INL(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
+ outl(readl(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
&lp->evm_saa9730_regs->InterruptBlock1);
}
static void evm_saa9730_unblock_lan_int(struct lan_saa9730_private *lp)
{
- OUTL(INL(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
+ outl(readl(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
&lp->evm_saa9730_regs->InterruptBlock1);
}
-static void show_saa9730_regs(struct lan_saa9730_private *lp)
+static void __attribute_used__ show_saa9730_regs(struct lan_saa9730_private *lp)
{
int i, j;
- printk("TxmBufferA = %x\n", lp->TxmBuffer[0][0]);
- printk("TxmBufferB = %x\n", lp->TxmBuffer[1][0]);
- printk("RcvBufferA = %x\n", lp->RcvBuffer[0][0]);
- printk("RcvBufferB = %x\n", lp->RcvBuffer[1][0]);
+ printk("TxmBufferA = %p\n", lp->TxmBuffer[0][0]);
+ printk("TxmBufferB = %p\n", lp->TxmBuffer[1][0]);
+ printk("RcvBufferA = %p\n", lp->RcvBuffer[0][0]);
+ printk("RcvBufferB = %p\n", lp->RcvBuffer[1][0]);
for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) {
printk("TxmBuffer[%d][%d] = %x\n", i, j,
@@ -120,13 +119,13 @@ static void show_saa9730_regs(struct lan_saa9730_private *lp)
}
}
printk("lp->evm_saa9730_regs->InterruptBlock1 = %x\n",
- INL(&lp->evm_saa9730_regs->InterruptBlock1));
+ readl(&lp->evm_saa9730_regs->InterruptBlock1));
printk("lp->evm_saa9730_regs->InterruptStatus1 = %x\n",
- INL(&lp->evm_saa9730_regs->InterruptStatus1));
+ readl(&lp->evm_saa9730_regs->InterruptStatus1));
printk("lp->evm_saa9730_regs->InterruptEnable1 = %x\n",
- INL(&lp->evm_saa9730_regs->InterruptEnable1));
+ readl(&lp->evm_saa9730_regs->InterruptEnable1));
printk("lp->lan_saa9730_regs->Ok2Use = %x\n",
- INL(&lp->lan_saa9730_regs->Ok2Use));
+ readl(&lp->lan_saa9730_regs->Ok2Use));
printk("lp->NextTxmBufferIndex = %x\n", lp->NextTxmBufferIndex);
printk("lp->NextTxmPacketIndex = %x\n", lp->NextTxmPacketIndex);

This diff is incomplete. Download the complete patch.

drivers/net/smc91x.h

View file

This diff is incomplete. Download the complete patch.

drivers/net/wireless/Kconfig

View file

This diff is incomplete. Download the complete patch.

drivers/net/wireless/atmel.c

View file

This diff is incomplete. Download the complete patch.

drivers/net/wireless/atmel.h

View file

This diff is incomplete. Download the complete patch.

drivers/net/wireless/atmel_cs.c

View file

This diff is incomplete. Download the complete patch.

drivers/net/wireless/atmel_pci.c

View file

This diff is incomplete. Download the complete patch.

drivers/s390/net/lcs.c

View file

This diff is incomplete. Download the complete patch.

drivers/s390/net/qeth.h

View file

This diff is incomplete. Download the complete patch.

drivers/s390/net/qeth_main.c

View file

This diff is incomplete. Download the complete patch.

drivers/s390/net/qeth_mpc.c

View file

This diff is incomplete. Download the complete patch.

drivers/s390/net/qeth_mpc.h

View file

This diff is incomplete. Download the complete patch.

drivers/s390/net/qeth_sys.c

View file

This diff is incomplete. Download the complete patch.

drivers/s390/net/qeth_tso.h

View file

This diff is incomplete. Download the complete patch.