Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Merge commit. Changes below are compared with the first parent: 97e18dc0.
Changes
64 files changed · +3292 −501
Only the first 600 diff lines are shown. Download the complete patch.
Documentation/devicetree/bindings/i2c/i2c-at91.txt
View filediff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
index 4fade84..388f0a2 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
@@ -12,6 +12,7 @@ Required properties :
- clocks: phandles to input clocks.
Optional properties:
+- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000
- Child nodes conforming to i2c bus binding
Examples :
@@ -23,6 +24,7 @@ i2c0: i2c@fff84000 {
#address-cells = <1>;
#size-cells = <0>;
clocks = <&twi0_clk>;
+ clock-frequency = <400000>;
24c512@50 {
compatible = "24c512";
Documentation/devicetree/bindings/i2c/i2c-cadence.txt
View filediff --git a/Documentation/devicetree/bindings/i2c/i2c-cadence.txt b/Documentation/devicetree/bindings/i2c/i2c-cadence.txt
new file mode 100644
index 0000000..7cb0b56
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-cadence.txt
@@ -0,0 +1,24 @@
+Binding for the Cadence I2C controller
+
+Required properties:
+ - reg: Physical base address and size of the controller's register area.
+ - compatible: Compatibility string. Must be 'cdns,i2c-r1p10'.
+ - clocks: Input clock specifier. Refer to common clock bindings.
+ - interrupts: Interrupt specifier. Refer to interrupt bindings.
+ - #address-cells: Should be 1.
+ - #size-cells: Should be 0.
+
+Optional properties:
+ - clock-frequency: Desired operating frequency, in Hz, of the bus.
+ - clock-names: Input clock name, should be 'pclk'.
+
+Example:
+ i2c@e0004000 {
+ compatible = "cdns,i2c-r1p10";
+ clocks = <&clkc 38>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xe0004000 0x1000>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
Documentation/devicetree/bindings/i2c/i2c-designware.txt
View filediff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
index 7fd7fa2..5199b0c 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
@@ -14,6 +14,12 @@ Optional properties :
- i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds.
This option is only supported in hardware blocks version 1.11a or newer.
+ - i2c-scl-falling-time : should contain the SCL falling time in nanoseconds.
+ This value which is by default 300ns is used to compute the tLOW period.
+
+ - i2c-sda-falling-time : should contain the SDA falling time in nanoseconds.
+ This value which is by default 300ns is used to compute the tHIGH period.
+
Example :
i2c@f0000 {
@@ -34,4 +40,6 @@ Example :
interrupts = <12 1>;
clock-frequency = <400000>;
i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <300>;
+ i2c-scl-falling-time-ns = <300>;
};
Documentation/devicetree/bindings/i2c/i2c-efm32.txt
View filediff --git a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
new file mode 100644
index 0000000..fc15ac5
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
@@ -0,0 +1,34 @@
+* Energymicro efm32 i2c controller
+
+Required properties :
+
+ - reg : Offset and length of the register set for the device
+ - compatible : should be "energymicro,efm32-i2c"
+ - interrupts : the interrupt number
+ - clocks : reference to the module clock
+
+Recommended properties :
+
+ - clock-frequency : maximal I2C bus clock frequency in Hz.
+ - efm32,location : Decides the location of the USART I/O pins.
+ Allowed range : [0 .. 6]
+
+Example:
+ i2c0: i2c@4000a000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "energymicro,efm32-i2c";
+ reg = <0x4000a000 0x400>;
+ interrupts = <9>;
+ clocks = <&cmu clk_HFPERCLKI2C0>;
+ clock-frequency = <100000>;
+ status = "ok";
+ efm32,location = <3>;
+
+ eeprom@50 {
+ compatible = "microchip,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+ };
+
Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
View filediff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
index 582b465..befd4fb 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
@@ -4,12 +4,16 @@
Required properties :
- reg : Offset and length of the register set for the device
- - compatible : Should be "marvell,mv64xxx-i2c" or "allwinner,sun4i-i2c"
- or "marvell,mv78230-i2c" or "marvell,mv78230-a0-i2c"
- Note: Only use "marvell,mv78230-a0-i2c" for a very rare,
- initial version of the SoC which had broken offload
- support. Linux auto-detects this and sets it
- appropriately.
+ - compatible : Should be either:
+ - "allwinner,sun4i-i2c"
+ - "allwinner,sun6i-a31-i2c"
+ - "marvell,mv64xxx-i2c"
+ - "marvell,mv78230-i2c"
+ - "marvell,mv78230-a0-i2c"
+ * Note: Only use "marvell,mv78230-a0-i2c" for a
+ very rare, initial version of the SoC which
+ had broken offload support. Linux
+ auto-detects this and sets it appropriately.
- interrupts : The interrupt number
Optional properties :
@@ -17,6 +21,10 @@ Optional properties :
- clock-frequency : Desired I2C bus clock frequency in Hz. If not set the
default frequency is 100kHz
+ - resets : phandle to the parent reset controller. Mandatory
+ whenever you're using the "allwinner,sun6i-a31-i2c"
+ compatible.
+
Examples:
i2c@11000 {
Documentation/devicetree/bindings/i2c/i2c-rcar.txt
View filediff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
index 897cfcd..dd8b2dd 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
@@ -6,6 +6,7 @@ Required properties:
"renesas,i2c-r8a7778"
"renesas,i2c-r8a7779"
"renesas,i2c-r8a7790"
+ "renesas,i2c-r8a7791"
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: interrupt specifier.
@@ -13,11 +14,16 @@ Required properties:
Optional properties:
- clock-frequency: desired I2C bus clock frequency in Hz. The absence of this
propoerty indicates the default frequency 100 kHz.
+- clocks: clock specifier.
Examples :
-i2c0: i2c@e6500000 {
- compatible = "renesas,i2c-rcar-h2";
- reg = <0 0xe6500000 0 0x428>;
- interrupts = <0 174 0x4>;
+i2c0: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7791";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
+ clock-frequency = <400000>;
};
Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
View filediff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
new file mode 100644
index 0000000..dc71754
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
@@ -0,0 +1,40 @@
+Qualcomm Universal Peripheral (QUP) I2C controller
+
+Required properties:
+ - compatible: Should be:
+ * "qcom,i2c-qup-v1.1.1" for 8660, 8960 and 8064.
+ * "qcom,i2c-qup-v2.1.1" for 8974 v1.
+ * "qcom,i2c-qup-v2.2.1" for 8974 v2 and later.
+ - reg: Should contain QUP register address and length.
+ - interrupts: Should contain I2C interrupt.
+
+ - clocks: A list of phandles + clock-specifiers, one for each entry in
+ clock-names.
+ - clock-names: Should contain:
+ * "core" for the core clock
+ * "iface" for the AHB clock
+
+ - #address-cells: Should be <1> Address cells for i2c device address
+ - #size-cells: Should be <0> as i2c addresses have no size component
+
+Optional properties:
+ - clock-frequency: Should specify the desired i2c bus clock frequency in Hz,
+ defaults to 100kHz if omitted.
+
+Child nodes should conform to i2c bus binding.
+
+Example:
+
+ i2c@f9924000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0xf9924000 0x1000>;
+ interrupts = <0 96 0>;
+
+ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+
+ clock-frequency = <355000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
Documentation/i2c/busses/i2c-i801
View filediff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index aaaf069..adf5e33 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -26,6 +26,7 @@ Supported adapters:
* Intel Wellsburg (PCH)
* Intel Coleto Creek (PCH)
* Intel Wildcat Point-LP (PCH)
+ * Intel BayTrail (SOC)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller
Documentation/i2c/functionality
View filediff --git a/Documentation/i2c/functionality b/Documentation/i2c/functionality
index b0ff2ab..4556a3e 100644
--- a/Documentation/i2c/functionality
+++ b/Documentation/i2c/functionality
@@ -46,7 +46,7 @@ A few combinations of the above flags are also defined for your convenience:
and write_block_data commands
I2C_FUNC_SMBUS_I2C_BLOCK Handles the SMBus read_i2c_block_data
and write_i2c_block_data commands
- I2C_FUNC_SMBUS_EMUL Handles all SMBus commands than can be
+ I2C_FUNC_SMBUS_EMUL Handles all SMBus commands that can be
emulated by a real I2C adapter (using
the transparent emulation layer)
Documentation/i2c/i2c-protocol
View filediff --git a/Documentation/i2c/i2c-protocol b/Documentation/i2c/i2c-protocol
index 0b3e62d..ff6d6ce 100644
--- a/Documentation/i2c/i2c-protocol
+++ b/Documentation/i2c/i2c-protocol
@@ -6,8 +6,8 @@ Key to symbols
S (1 bit) : Start bit
P (1 bit) : Stop bit
Rd/Wr (1 bit) : Read/Write bit. Rd equals 1, Wr equals 0.
-A, NA (1 bit) : Accept and reverse accept bit.
-Addr (7 bits): I2C 7 bit address. Note that this can be expanded as usual to
+A, NA (1 bit) : Accept and reverse accept bit.
+Addr (7 bits): I2C 7 bit address. Note that this can be expanded as usual to
get a 10 bit I2C address.
Comm (8 bits): Command byte, a data byte which often selects a register on
the device.
@@ -49,11 +49,20 @@ a byte read, followed by a byte write:
Modified transactions
=====================
-The following modifications to the I2C protocol can also be generated,
-with the exception of I2C_M_NOSTART these are usually only needed to
-work around device issues:
+The following modifications to the I2C protocol can also be generated by
+setting these flags for i2c messages. With the exception of I2C_M_NOSTART, they
+are usually only needed to work around device issues:
- Flag I2C_M_NOSTART:
+I2C_M_IGNORE_NAK:
+ Normally message is interrupted immediately if there is [NA] from the
+ client. Setting this flag treats any [NA] as [A], and all of
+ message is sent.
+ These messages may still fail to SCL lo->hi timeout.
+
+I2C_M_NO_RD_ACK:
+ In a read message, master A/NA bit is skipped.
+
+I2C_M_NOSTART:
In a combined transaction, no 'S Addr Wr/Rd [A]' is generated at some
point. For example, setting I2C_M_NOSTART on the second partial message
generates something like:
@@ -67,17 +76,13 @@ work around device issues:
I2C device but may also be used between direction changes by some
rare devices.
- Flags I2C_M_REV_DIR_ADDR
+I2C_M_REV_DIR_ADDR:
This toggles the Rd/Wr flag. That is, if you want to do a write, but
need to emit an Rd instead of a Wr, or vice versa, you set this
flag. For example:
S Addr Rd [A] Data [A] Data [A] ... [A] Data [A] P
- Flags I2C_M_IGNORE_NAK
- Normally message is interrupted immediately if there is [NA] from the
- client. Setting this flag treats any [NA] as [A], and all of
- message is sent.
- These messages may still fail to SCL lo->hi timeout.
-
- Flags I2C_M_NO_RD_ACK
- In a read message, master A/NA bit is skipped.
+I2C_M_STOP:
+ Force a stop condition (P) after the message. Some I2C related protocols
+ like SCCB require that. Normally, you really don't want to get interrupted
+ between the messages of one transfer.
MAINTAINERS
View filediff --git a/MAINTAINERS b/MAINTAINERS
index a769432..beaa87a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1427,6 +1427,7 @@ F: drivers/cpuidle/cpuidle-zynq.c
N: zynq
N: xilinx
F: drivers/clocksource/cadence_ttc_timer.c
+F: drivers/i2c/busses/i2c-cadence.c
F: drivers/mmc/host/sdhci-of-arasan.c
ARM SMMU DRIVER
@@ -4308,7 +4309,8 @@ F: drivers/i2c/i2c-stub.c
I2C SUBSYSTEM
M: Wolfram Sang <[email protected]>
-W: http://i2c.wiki.kernel.org/
+W: https://i2c.wiki.kernel.org/
+Q: https://patchwork.ozlabs.org/project/linux-i2c/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
S: Maintained
F: Documentation/i2c/
arch/blackfin/include/asm/bfin_twi.h
View filediff --git a/arch/blackfin/include/asm/bfin_twi.h b/arch/blackfin/include/asm/bfin_twi.h
index 90c3c00..aaa0834 100644
--- a/arch/blackfin/include/asm/bfin_twi.h
+++ b/arch/blackfin/include/asm/bfin_twi.h
@@ -9,60 +9,7 @@
#ifndef __ASM_BFIN_TWI_H__
#define __ASM_BFIN_TWI_H__
-#include <linux/types.h>
-#include <linux/i2c.h>
-
-/*
- * All Blackfin system MMRs are padded to 32bits even if the register
- * itself is only 16bits. So use a helper macro to streamline this.
- */
-#define __BFP(m) u16 m; u16 __pad_##m
-
-/*
- * bfin twi registers layout
- */
-struct bfin_twi_regs {
- __BFP(clkdiv);
- __BFP(control);
- __BFP(slave_ctl);
- __BFP(slave_stat);
- __BFP(slave_addr);
- __BFP(master_ctl);
- __BFP(master_stat);
- __BFP(master_addr);
- __BFP(int_stat);
- __BFP(int_mask);
- __BFP(fifo_ctl);
- __BFP(fifo_stat);
- u32 __pad[20];
- __BFP(xmt_data8);
- __BFP(xmt_data16);
- __BFP(rcv_data8);
- __BFP(rcv_data16);
-};
-
-#undef __BFP
-
-struct bfin_twi_iface {
- int irq;
- spinlock_t lock;
- char read_write;
- u8 command;
- u8 *transPtr;
- int readNum;
- int writeNum;
- int cur_mode;
- int manual_stop;
- int result;
- struct i2c_adapter adap;
- struct completion complete;
- struct i2c_msg *pmsg;
- int msg_num;
- int cur_msg;
- u16 saved_clkdiv;
- u16 saved_control;
- struct bfin_twi_regs __iomem *regs_base;
-};
+#include <asm/blackfin.h>
#define DEFINE_TWI_REG(reg_name, reg) \
static inline u16 read_##reg_name(struct bfin_twi_iface *iface) \
@@ -71,7 +18,6 @@ static inline void write_##reg_name(struct bfin_twi_iface *iface, u16 v) \
{ bfin_write16(&iface->regs_base->reg, v); }
DEFINE_TWI_REG(CLKDIV, clkdiv)
-DEFINE_TWI_REG(CONTROL, control)
DEFINE_TWI_REG(SLAVE_CTL, slave_ctl)
DEFINE_TWI_REG(SLAVE_STAT, slave_stat)
DEFINE_TWI_REG(SLAVE_ADDR, slave_addr)
@@ -80,7 +26,6 @@ DEFINE_TWI_REG(MASTER_STAT, master_stat)
DEFINE_TWI_REG(MASTER_ADDR, master_addr)
DEFINE_TWI_REG(INT_STAT, int_stat)
DEFINE_TWI_REG(INT_MASK, int_mask)
-DEFINE_TWI_REG(FIFO_CTL, fifo_ctl)
DEFINE_TWI_REG(FIFO_STAT, fifo_stat)
DEFINE_TWI_REG(XMT_DATA8, xmt_data8)
DEFINE_TWI_REG(XMT_DATA16, xmt_data16)
@@ -113,75 +58,25 @@ static inline u16 read_RCV_DATA16(struct bfin_twi_iface *iface)
}
#endif
+static inline u16 read_FIFO_CTL(struct bfin_twi_iface *iface)
+{
+ return bfin_read16(&iface->regs_base->fifo_ctl);
+}
-/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/
-/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */
-#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */
-#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
-
-/* TWI_PRESCALE Masks */
-#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */
-#define TWI_ENA 0x0080 /* TWI Enable */
-#define SCCB 0x0200 /* SCCB Compatibility Enable */
-
-/* TWI_SLAVE_CTL Masks */
-#define SEN 0x0001 /* Slave Enable */
-#define SADD_LEN 0x0002 /* Slave Address Length */
-#define STDVAL 0x0004 /* Slave Transmit Data Valid */
-#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
-#define GEN 0x0010 /* General Call Address Matching Enabled */
-
-/* TWI_SLAVE_STAT Masks */
-#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
-#define GCALL 0x0002 /* General Call Indicator */
-
-/* TWI_MASTER_CTL Masks */
-#define MEN 0x0001 /* Master Mode Enable */
-#define MADD_LEN 0x0002 /* Master Address Length */
-#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */
-#define FAST 0x0008 /* Use Fast Mode Timing Specs */
-#define STOP 0x0010 /* Issue Stop Condition */
-#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */
-#define DCNT 0x3FC0 /* Data Bytes To Transfer */
-#define SDAOVR 0x4000 /* Serial Data Override */
-#define SCLOVR 0x8000 /* Serial Clock Override */
-
-/* TWI_MASTER_STAT Masks */
-#define MPROG 0x0001 /* Master Transfer In Progress */
-#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */
-#define ANAK 0x0004 /* Address Not Acknowledged */
-#define DNAK 0x0008 /* Data Not Acknowledged */
-#define BUFRDERR 0x0010 /* Buffer Read Error */
-#define BUFWRERR 0x0020 /* Buffer Write Error */
-#define SDASEN 0x0040 /* Serial Data Sense */
-#define SCLSEN 0x0080 /* Serial Clock Sense */
-#define BUSBUSY 0x0100 /* Bus Busy Indicator */
-
-/* TWI_INT_SRC and TWI_INT_ENABLE Masks */
-#define SINIT 0x0001 /* Slave Transfer Initiated */
-#define SCOMP 0x0002 /* Slave Transfer Complete */
-#define SERR 0x0004 /* Slave Transfer Error */
-#define SOVF 0x0008 /* Slave Overflow */
-#define MCOMP 0x0010 /* Master Transfer Complete */
-#define MERR 0x0020 /* Master Transfer Error */
-#define XMTSERV 0x0040 /* Transmit FIFO Service */
-#define RCVSERV 0x0080 /* Receive FIFO Service */
-
-/* TWI_FIFO_CTRL Masks */
-#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */
-#define RCVFLUSH 0x0002 /* Receive Buffer Flush */
-#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */
-#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */
-
-/* TWI_FIFO_STAT Masks */
-#define XMTSTAT 0x0003 /* Transmit FIFO Status */
-#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */
-#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */
-#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */
+static inline void write_FIFO_CTL(struct bfin_twi_iface *iface, u16 v)
+{
+ bfin_write16(&iface->regs_base->fifo_ctl, v);
+ SSYNC();
+}
-#define RCVSTAT 0x000C /* Receive FIFO Status */
-#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */
-#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */
-#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */
+static inline u16 read_CONTROL(struct bfin_twi_iface *iface)
+{
+ return bfin_read16(&iface->regs_base->control);
+}
+static inline void write_CONTROL(struct bfin_twi_iface *iface, u16 v)
+{
+ SSYNC();
+ bfin_write16(&iface->regs_base->control, v);
+}
#endif
arch/blackfin/kernel/debug-mmrs.c
View filediff --git a/arch/blackfin/kernel/debug-mmrs.c b/arch/blackfin/kernel/debug-mmrs.c
index 01232a1..947ad08 100644
--- a/arch/blackfin/kernel/debug-mmrs.c
+++ b/arch/blackfin/kernel/debug-mmrs.c
@@ -10,6 +10,7 @@
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/i2c/bfin_twi.h>
#include <asm/blackfin.h>
#include <asm/gpio.h>
drivers/i2c/busses/Kconfig
View filediff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 014afab..c94db1c 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -110,6 +110,7 @@ config I2C_I801
Wellsburg (PCH)
Coleto Creek (PCH)
Wildcat Point-LP (PCH)
+ BayTrail (SOC)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
@@ -375,6 +376,13 @@ config I2C_BLACKFIN_TWI_CLK_KHZ
help
The unit of the TWI clock is kHz.
+config I2C_CADENCE
+ tristate "Cadence I2C Controller"
+ depends on ARCH_ZYNQ
+ help
+ Say yes here to select Cadence I2C Host Controller. This controller is
+ e.g. used by Xilinx Zynq.
+
config I2C_CBUS_GPIO
tristate "CBUS I2C driver"
depends on GPIOLIB
@@ -432,6 +440,13 @@ config I2C_DESIGNWARE_PCI
This driver can also be built as a module. If so, the module
will be called i2c-designware-pci.
+config I2C_EFM32
+ tristate "EFM32 I2C controller"
+ depends on ARCH_EFM32 || COMPILE_TEST
+ help
+ This driver supports the i2c block found in Energy Micro's EFM32
+ SoCs.
+
config I2C_EG20T
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C"
depends on PCI
@@ -527,7 +542,7 @@ config I2C_MPC
config I2C_MV64XXX
tristate "Marvell mv64xxx I2C Controller"
- depends on (MV64X60 || PLAT_ORION || ARCH_SUNXI)
+ depends on MV64X60 || PLAT_ORION || ARCH_SUNXI
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Marvell 64xxx line of host bridges.
@@ -648,6 +663,16 @@ config I2C_PXA_SLAVE
is necessary for systems where the PXA may be a target on the
I2C bus.
+config I2C_QUP
+ tristate "Qualcomm QUP based I2C controller"
+ depends on ARCH_QCOM
+ help
+ If you say yes to this option, support will be included for the
+ built-in I2C interface on the Qualcomm SoCs.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-qup.
+
config I2C_RIIC
tristate "Renesas RIIC adapter"
depends on ARCH_SHMOBILE || COMPILE_TEST
drivers/i2c/busses/Makefile
View filediff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index a08931f..18d18ff 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_I2C_AT91) += i2c-at91.o
This diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-ali1535.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-ali1563.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-ali15x3.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-amd756.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-amd8111.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-at91.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-bcm2835.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-bfin-twi.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-cadence.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-davinci.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-designware-core.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-designware-core.h
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-designware-pcidrv.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-designware-platdrv.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-efm32.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-eg20t.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-exynos5.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-gpio.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-hydra.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-i801.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-ismt.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-mv64xxx.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-mxs.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-nforce2.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-nomadik.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-ocores.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-omap.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-pasemi.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-piix4.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-pxa-pci.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-qup.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-rcar.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-s3c2410.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-sirf.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-sis5595.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-sis630.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-sis96x.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-st.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-stu300.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-tegra.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-via.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-viapro.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/i2c-xiic.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/busses/scx200_acb.c
View fileThis diff is incomplete. Download the complete patch.
drivers/i2c/i2c-core.c
View fileThis diff is incomplete. Download the complete patch.
include/linux/i2c.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/i2c/bfin_twi.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/platform_data/i2c-s3c2410.h
View fileThis diff is incomplete. Download the complete patch.
include/trace/events/i2c.h
View fileThis diff is incomplete. Download the complete patch.