Merge tag 'usb-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Merge commit. Changes below are compared with the first parent: 67944024.
Changes
7 files changed · +12 −1026
| File | Status | Add | Del | Content |
|---|---|---|---|---|
| drivers/usb/chipidea/otg.c | modified | +1 | −1 | View file |
| drivers/usb/serial/Kconfig | modified | +0 | −16 | View file |
| drivers/usb/serial/Makefile | modified | +0 | −1 | View file |
| drivers/usb/serial/cp210x.c | modified | +1 | −0 | View file |
| drivers/usb/serial/mxu11x0.c | deleted | +0 | −1006 | View before deletion |
| drivers/usb/serial/option.c | modified | +5 | −0 | View file |
| drivers/usb/serial/qcserial.c | modified | +5 | −2 | View file |
Only the first 600 diff lines are shown. Download the complete patch.
drivers/usb/chipidea/otg.c
View filediff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
index 45f86da..03b6743 100644
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -158,7 +158,7 @@ static void ci_otg_work(struct work_struct *work)
int ci_hdrc_otg_init(struct ci_hdrc *ci)
{
INIT_WORK(&ci->work, ci_otg_work);
- ci->wq = create_singlethread_workqueue("ci_otg");
+ ci->wq = create_freezable_workqueue("ci_otg");
if (!ci->wq) {
dev_err(ci->dev, "can't create workqueue\n");
return -ENODEV;
drivers/usb/serial/Kconfig
View filediff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index f612dda..56ecb8b 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -475,22 +475,6 @@ config USB_SERIAL_MOS7840
To compile this driver as a module, choose M here: the
module will be called mos7840. If unsure, choose N.
-config USB_SERIAL_MXUPORT11
- tristate "USB Moxa UPORT 11x0 Serial Driver"
- ---help---
- Say Y here if you want to use a MOXA UPort 11x0 Serial hub.
-
- This driver supports:
-
- - UPort 1110 : 1 port RS-232 USB to Serial Hub.
- - UPort 1130 : 1 port RS-422/485 USB to Serial Hub.
- - UPort 1130I : 1 port RS-422/485 USB to Serial Hub with Isolation.
- - UPort 1150 : 1 port RS-232/422/485 USB to Serial Hub.
- - UPort 1150I : 1 port RS-232/422/485 USB to Serial Hub with Isolation.
-
- To compile this driver as a module, choose M here: the
- module will be called mxu11x0.
-
config USB_SERIAL_MXUPORT
tristate "USB Moxa UPORT Serial Driver"
---help---
drivers/usb/serial/Makefile
View filediff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index f3fa5e5..349d9df 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_USB_SERIAL_METRO) += metro-usb.o
obj-$(CONFIG_USB_SERIAL_MOS7720) += mos7720.o
obj-$(CONFIG_USB_SERIAL_MOS7840) += mos7840.o
obj-$(CONFIG_USB_SERIAL_MXUPORT) += mxuport.o
-obj-$(CONFIG_USB_SERIAL_MXUPORT11) += mxu11x0.o
obj-$(CONFIG_USB_SERIAL_NAVMAN) += navman.o
obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o
obj-$(CONFIG_USB_SERIAL_OPTICON) += opticon.o
drivers/usb/serial/cp210x.c
View filediff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 7c319e7..73a366d 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -165,6 +165,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */
{ USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
{ USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
+ { USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
{ USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */
drivers/usb/serial/mxu11x0.c
View before deletiondiff --git a/drivers/usb/serial/mxu11x0.c b/drivers/usb/serial/mxu11x0.c
deleted file mode 100644
index 6196073..0000000
--- a/drivers/usb/serial/mxu11x0.c
+++ /dev/null
@@ -1,1006 +0,0 @@
-/*
- * USB Moxa UPORT 11x0 Serial Driver
- *
- * Copyright (C) 2007 MOXA Technologies Co., Ltd.
- * Copyright (C) 2015 Mathieu Othacehe <[email protected]>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- *
- * Supports the following Moxa USB to serial converters:
- * UPort 1110, 1 port RS-232 USB to Serial Hub.
- * UPort 1130, 1 port RS-422/485 USB to Serial Hub.
- * UPort 1130I, 1 port RS-422/485 USB to Serial Hub with isolation
- * protection.
- * UPort 1150, 1 port RS-232/422/485 USB to Serial Hub.
- * UPort 1150I, 1 port RS-232/422/485 USB to Serial Hub with isolation
- * protection.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/firmware.h>
-#include <linux/jiffies.h>
-#include <linux/serial.h>
-#include <linux/serial_reg.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-#include <linux/uaccess.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-
-/* Vendor and product ids */
-#define MXU1_VENDOR_ID 0x110a
-#define MXU1_1110_PRODUCT_ID 0x1110
-#define MXU1_1130_PRODUCT_ID 0x1130
-#define MXU1_1150_PRODUCT_ID 0x1150
-#define MXU1_1151_PRODUCT_ID 0x1151
-#define MXU1_1131_PRODUCT_ID 0x1131
-
-/* Commands */
-#define MXU1_GET_VERSION 0x01
-#define MXU1_GET_PORT_STATUS 0x02
-#define MXU1_GET_PORT_DEV_INFO 0x03
-#define MXU1_GET_CONFIG 0x04
-#define MXU1_SET_CONFIG 0x05
-#define MXU1_OPEN_PORT 0x06
-#define MXU1_CLOSE_PORT 0x07
-#define MXU1_START_PORT 0x08
-#define MXU1_STOP_PORT 0x09
-#define MXU1_TEST_PORT 0x0A
-#define MXU1_PURGE_PORT 0x0B
-#define MXU1_RESET_EXT_DEVICE 0x0C
-#define MXU1_GET_OUTQUEUE 0x0D
-#define MXU1_WRITE_DATA 0x80
-#define MXU1_READ_DATA 0x81
-#define MXU1_REQ_TYPE_CLASS 0x82
-
-/* Module identifiers */
-#define MXU1_I2C_PORT 0x01
-#define MXU1_IEEE1284_PORT 0x02
-#define MXU1_UART1_PORT 0x03
-#define MXU1_UART2_PORT 0x04
-#define MXU1_RAM_PORT 0x05
-
-/* Modem status */
-#define MXU1_MSR_DELTA_CTS 0x01
-#define MXU1_MSR_DELTA_DSR 0x02
-#define MXU1_MSR_DELTA_RI 0x04
-#define MXU1_MSR_DELTA_CD 0x08
-#define MXU1_MSR_CTS 0x10
-#define MXU1_MSR_DSR 0x20
-#define MXU1_MSR_RI 0x40
-#define MXU1_MSR_CD 0x80
-#define MXU1_MSR_DELTA_MASK 0x0F
-#define MXU1_MSR_MASK 0xF0
-
-/* Line status */
-#define MXU1_LSR_OVERRUN_ERROR 0x01
-#define MXU1_LSR_PARITY_ERROR 0x02
-#define MXU1_LSR_FRAMING_ERROR 0x04
-#define MXU1_LSR_BREAK 0x08
-#define MXU1_LSR_ERROR 0x0F
-#define MXU1_LSR_RX_FULL 0x10
-#define MXU1_LSR_TX_EMPTY 0x20
-
-/* Modem control */
-#define MXU1_MCR_LOOP 0x04
-#define MXU1_MCR_DTR 0x10
-#define MXU1_MCR_RTS 0x20
-
-/* Mask settings */
-#define MXU1_UART_ENABLE_RTS_IN 0x0001
-#define MXU1_UART_DISABLE_RTS 0x0002
-#define MXU1_UART_ENABLE_PARITY_CHECKING 0x0008
-#define MXU1_UART_ENABLE_DSR_OUT 0x0010
-#define MXU1_UART_ENABLE_CTS_OUT 0x0020
-#define MXU1_UART_ENABLE_X_OUT 0x0040
-#define MXU1_UART_ENABLE_XA_OUT 0x0080
-#define MXU1_UART_ENABLE_X_IN 0x0100
-#define MXU1_UART_ENABLE_DTR_IN 0x0800
-#define MXU1_UART_DISABLE_DTR 0x1000
-#define MXU1_UART_ENABLE_MS_INTS 0x2000
-#define MXU1_UART_ENABLE_AUTO_START_DMA 0x4000
-#define MXU1_UART_SEND_BREAK_SIGNAL 0x8000
-
-/* Parity */
-#define MXU1_UART_NO_PARITY 0x00
-#define MXU1_UART_ODD_PARITY 0x01
-#define MXU1_UART_EVEN_PARITY 0x02
-#define MXU1_UART_MARK_PARITY 0x03
-#define MXU1_UART_SPACE_PARITY 0x04
-
-/* Stop bits */
-#define MXU1_UART_1_STOP_BITS 0x00
-#define MXU1_UART_1_5_STOP_BITS 0x01
-#define MXU1_UART_2_STOP_BITS 0x02
-
-/* Bits per character */
-#define MXU1_UART_5_DATA_BITS 0x00
-#define MXU1_UART_6_DATA_BITS 0x01
-#define MXU1_UART_7_DATA_BITS 0x02
-#define MXU1_UART_8_DATA_BITS 0x03
-
-/* Operation modes */
-#define MXU1_UART_232 0x00
-#define MXU1_UART_485_RECEIVER_DISABLED 0x01
-#define MXU1_UART_485_RECEIVER_ENABLED 0x02
-
-/* Pipe transfer mode and timeout */
-#define MXU1_PIPE_MODE_CONTINUOUS 0x01
-#define MXU1_PIPE_MODE_MASK 0x03
-#define MXU1_PIPE_TIMEOUT_MASK 0x7C
-#define MXU1_PIPE_TIMEOUT_ENABLE 0x80
-
-/* Config struct */
-struct mxu1_uart_config {
- __be16 wBaudRate;
- __be16 wFlags;
- u8 bDataBits;
- u8 bParity;
- u8 bStopBits;
- char cXon;
- char cXoff;
- u8 bUartMode;
-} __packed;
-
-/* Purge modes */
-#define MXU1_PURGE_OUTPUT 0x00
-#define MXU1_PURGE_INPUT 0x80
-
-/* Read/Write data */
-#define MXU1_RW_DATA_ADDR_SFR 0x10
-#define MXU1_RW_DATA_ADDR_IDATA 0x20
-#define MXU1_RW_DATA_ADDR_XDATA 0x30
-#define MXU1_RW_DATA_ADDR_CODE 0x40
-#define MXU1_RW_DATA_ADDR_GPIO 0x50
-#define MXU1_RW_DATA_ADDR_I2C 0x60
-#define MXU1_RW_DATA_ADDR_FLASH 0x70
-#define MXU1_RW_DATA_ADDR_DSP 0x80
-
-#define MXU1_RW_DATA_UNSPECIFIED 0x00
-#define MXU1_RW_DATA_BYTE 0x01
-#define MXU1_RW_DATA_WORD 0x02
-#define MXU1_RW_DATA_DOUBLE_WORD 0x04
-
-struct mxu1_write_data_bytes {
- u8 bAddrType;
- u8 bDataType;
- u8 bDataCounter;
- __be16 wBaseAddrHi;
- __be16 wBaseAddrLo;
- u8 bData[0];
-} __packed;
-
-/* Interrupt codes */
-#define MXU1_CODE_HARDWARE_ERROR 0xFF
-#define MXU1_CODE_DATA_ERROR 0x03
-#define MXU1_CODE_MODEM_STATUS 0x04
-
-static inline int mxu1_get_func_from_code(unsigned char code)
-{
- return code & 0x0f;
-}
-
-/* Download firmware max packet size */
-#define MXU1_DOWNLOAD_MAX_PACKET_SIZE 64
-
-/* Firmware image header */
-struct mxu1_firmware_header {
- __le16 wLength;
- u8 bCheckSum;
-} __packed;
-
-#define MXU1_UART_BASE_ADDR 0xFFA0
-#define MXU1_UART_OFFSET_MCR 0x0004
-
-#define MXU1_BAUD_BASE 923077
-
-#define MXU1_TRANSFER_TIMEOUT 2
-#define MXU1_DOWNLOAD_TIMEOUT 1000
-#define MXU1_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */
-
-struct mxu1_port {
- u8 msr;
- u8 mcr;
- u8 uart_mode;
- spinlock_t spinlock; /* Protects msr */
- struct mutex mutex; /* Protects mcr */
- bool send_break;
-};
-
-struct mxu1_device {
- u16 mxd_model;
-};
-
-static const struct usb_device_id mxu1_idtable[] = {
- { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
- { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
- { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
- { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
- { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
- { }
-};
-
-MODULE_DEVICE_TABLE(usb, mxu1_idtable);
-
-/* Write the given buffer out to the control pipe. */
-static int mxu1_send_ctrl_data_urb(struct usb_serial *serial,
- u8 request,
- u16 value, u16 index,
- void *data, size_t size)
-{
- int status;
-
- status = usb_control_msg(serial->dev,
- usb_sndctrlpipe(serial->dev, 0),
- request,
- (USB_DIR_OUT | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE), value, index,
- data, size,
- USB_CTRL_SET_TIMEOUT);
- if (status < 0) {
- dev_err(&serial->interface->dev,
- "%s - usb_control_msg failed: %d\n",
- __func__, status);
- return status;
- }
-
- if (status != size) {
- dev_err(&serial->interface->dev,
- "%s - short write (%d / %zd)\n",
- __func__, status, size);
- return -EIO;
- }
-
- return 0;
-}
-
-/* Send a vendor request without any data */
-static int mxu1_send_ctrl_urb(struct usb_serial *serial,
- u8 request, u16 value, u16 index)
-{
- return mxu1_send_ctrl_data_urb(serial, request, value, index,
- NULL, 0);
-}
-
-static int mxu1_download_firmware(struct usb_serial *serial,
- const struct firmware *fw_p)
-{
- int status = 0;
- int buffer_size;
- int pos;
- int len;
- int done;
- u8 cs = 0;
- u8 *buffer;
- struct usb_device *dev = serial->dev;
- struct mxu1_firmware_header *header;
- unsigned int pipe;
-
- pipe = usb_sndbulkpipe(dev, serial->port[0]->bulk_out_endpointAddress);
-
- buffer_size = fw_p->size + sizeof(*header);
- buffer = kmalloc(buffer_size, GFP_KERNEL);
- if (!buffer)
- return -ENOMEM;
-
- memcpy(buffer, fw_p->data, fw_p->size);
- memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
-
- for (pos = sizeof(*header); pos < buffer_size; pos++)
- cs = (u8)(cs + buffer[pos]);
-
- header = (struct mxu1_firmware_header *)buffer;
- header->wLength = cpu_to_le16(buffer_size - sizeof(*header));
- header->bCheckSum = cs;
-
- dev_dbg(&dev->dev, "%s - downloading firmware\n", __func__);
-
- for (pos = 0; pos < buffer_size; pos += done) {
- len = min(buffer_size - pos, MXU1_DOWNLOAD_MAX_PACKET_SIZE);
-
- status = usb_bulk_msg(dev, pipe, buffer + pos, len, &done,
- MXU1_DOWNLOAD_TIMEOUT);
- if (status)
- break;
- }
-
- kfree(buffer);
-
- if (status) {
- dev_err(&dev->dev, "failed to download firmware: %d\n", status);
- return status;
- }
-
- msleep_interruptible(100);
- usb_reset_device(dev);
-
- dev_dbg(&dev->dev, "%s - download successful\n", __func__);
-
- return 0;
-}
-
-static int mxu1_port_probe(struct usb_serial_port *port)
-{
- struct mxu1_port *mxport;
- struct mxu1_device *mxdev;
-
- if (!port->interrupt_in_urb) {
- dev_err(&port->dev, "no interrupt urb\n");
- return -ENODEV;
- }
-
- mxport = kzalloc(sizeof(struct mxu1_port), GFP_KERNEL);
- if (!mxport)
- return -ENOMEM;
-
- spin_lock_init(&mxport->spinlock);
- mutex_init(&mxport->mutex);
-
- mxdev = usb_get_serial_data(port->serial);
-
- switch (mxdev->mxd_model) {
- case MXU1_1110_PRODUCT_ID:
- case MXU1_1150_PRODUCT_ID:
- case MXU1_1151_PRODUCT_ID:
- mxport->uart_mode = MXU1_UART_232;
- break;
- case MXU1_1130_PRODUCT_ID:
- case MXU1_1131_PRODUCT_ID:
- mxport->uart_mode = MXU1_UART_485_RECEIVER_DISABLED;
- break;
- }
-
- usb_set_serial_port_data(port, mxport);
-
- port->port.closing_wait =
- msecs_to_jiffies(MXU1_DEFAULT_CLOSING_WAIT * 10);
- port->port.drain_delay = 1;
-
- return 0;
-}
-
-static int mxu1_port_remove(struct usb_serial_port *port)
-{
- struct mxu1_port *mxport;
-
- mxport = usb_get_serial_port_data(port);
- kfree(mxport);
-
- return 0;
-}
-
-static int mxu1_startup(struct usb_serial *serial)
-{
- struct mxu1_device *mxdev;
- struct usb_device *dev = serial->dev;
- struct usb_host_interface *cur_altsetting;
- char fw_name[32];
- const struct firmware *fw_p = NULL;
- int err;
-
- dev_dbg(&serial->interface->dev, "%s - product 0x%04X, num configurations %d, configuration value %d\n",
- __func__, le16_to_cpu(dev->descriptor.idProduct),
- dev->descriptor.bNumConfigurations,
- dev->actconfig->desc.bConfigurationValue);
-
- /* create device structure */
- mxdev = kzalloc(sizeof(struct mxu1_device), GFP_KERNEL);
- if (!mxdev)
- return -ENOMEM;
-
- usb_set_serial_data(serial, mxdev);
-
- mxdev->mxd_model = le16_to_cpu(dev->descriptor.idProduct);
-
- cur_altsetting = serial->interface->cur_altsetting;
-
- /* if we have only 1 configuration, download firmware */
- if (cur_altsetting->desc.bNumEndpoints == 1) {
-
- snprintf(fw_name,
- sizeof(fw_name),
- "moxa/moxa-%04x.fw",
- mxdev->mxd_model);
-
- err = request_firmware(&fw_p, fw_name, &serial->interface->dev);
- if (err) {
- dev_err(&serial->interface->dev, "failed to request firmware: %d\n",
- err);
- goto err_free_mxdev;
- }
-
- err = mxu1_download_firmware(serial, fw_p);
- if (err)
- goto err_release_firmware;
-
- /* device is being reset */
- err = -ENODEV;
- goto err_release_firmware;
- }
-
- return 0;
-
-err_release_firmware:
- release_firmware(fw_p);
-err_free_mxdev:
- kfree(mxdev);
-
- return err;
-}
-
-static void mxu1_release(struct usb_serial *serial)
-{
- struct mxu1_device *mxdev;
-
- mxdev = usb_get_serial_data(serial);
- kfree(mxdev);
-}
-
-static int mxu1_write_byte(struct usb_serial_port *port, u32 addr,
- u8 mask, u8 byte)
-{
- int status;
- size_t size;
- struct mxu1_write_data_bytes *data;
-
- dev_dbg(&port->dev, "%s - addr 0x%08X, mask 0x%02X, byte 0x%02X\n",
- __func__, addr, mask, byte);
-
- size = sizeof(struct mxu1_write_data_bytes) + 2;
- data = kzalloc(size, GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- data->bAddrType = MXU1_RW_DATA_ADDR_XDATA;
- data->bDataType = MXU1_RW_DATA_BYTE;
- data->bDataCounter = 1;
- data->wBaseAddrHi = cpu_to_be16(addr >> 16);
- data->wBaseAddrLo = cpu_to_be16(addr);
- data->bData[0] = mask;
- data->bData[1] = byte;
-
- status = mxu1_send_ctrl_data_urb(port->serial, MXU1_WRITE_DATA, 0,
- MXU1_RAM_PORT, data, size);
- if (status < 0)
- dev_err(&port->dev, "%s - failed: %d\n", __func__, status);
-
- kfree(data);
-
- return status;
-}
-
-static int mxu1_set_mcr(struct usb_serial_port *port, unsigned int mcr)
-{
- int status;
-
- status = mxu1_write_byte(port,
- MXU1_UART_BASE_ADDR + MXU1_UART_OFFSET_MCR,
- MXU1_MCR_RTS | MXU1_MCR_DTR | MXU1_MCR_LOOP,
- mcr);
- return status;
-}
-
-static void mxu1_set_termios(struct tty_struct *tty,
- struct usb_serial_port *port,
- struct ktermios *old_termios)
-{
- struct mxu1_port *mxport = usb_get_serial_port_data(port);
- struct mxu1_uart_config *config;
- tcflag_t cflag, iflag;
- speed_t baud;
- int status;
- unsigned int mcr;
-
- cflag = tty->termios.c_cflag;
- iflag = tty->termios.c_iflag;
-
- if (old_termios &&
- !tty_termios_hw_change(&tty->termios, old_termios) &&
- tty->termios.c_iflag == old_termios->c_iflag) {
- dev_dbg(&port->dev, "%s - nothing to change\n", __func__);
- return;
- }
-
- dev_dbg(&port->dev,
- "%s - cflag 0x%08x, iflag 0x%08x\n", __func__, cflag, iflag);
-
- if (old_termios) {
- dev_dbg(&port->dev, "%s - old cflag 0x%08x, old iflag 0x%08x\n",
- __func__,
- old_termios->c_cflag,
- old_termios->c_iflag);
- }
-
- config = kzalloc(sizeof(*config), GFP_KERNEL);
- if (!config)
- return;
-
- /* these flags must be set */
- config->wFlags |= MXU1_UART_ENABLE_MS_INTS;
- config->wFlags |= MXU1_UART_ENABLE_AUTO_START_DMA;
- if (mxport->send_break)
This diff is incomplete. Download the complete patch.
drivers/usb/serial/option.c
View fileThis diff is incomplete. Download the complete patch.
drivers/usb/serial/qcserial.c
View fileThis diff is incomplete. Download the complete patch.