diff --git a/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt
new file mode 100644
index 0000000..de0eaed
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt
@@ -0,0 +1,18 @@
+Atmel TCB PWM controller
+
+Required properties:
+- compatible: should be "atmel,tcb-pwm"
+- #pwm-cells: Should be 3.  The first cell specifies the per-chip index
+  of the PWM to use, the second cell is the period in nanoseconds and
+  bit 0 in the third cell is used to encode the polarity of PWM output.
+  Set bit 0 of the third cell in PWM specifier to 1 for inverse polarity &
+  set to 0 for normal polarity.
+- tc-block: The Timer Counter block to use as a PWM chip.
+
+Example:
+
+pwm {
+	compatible = "atmel,tcb-pwm";
+	#pwm-cells = <3>;
+	tc-block = <1>;
+};
diff --git a/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
index bcc6367..d21d82d 100644
--- a/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
@@ -3,14 +3,17 @@ VIA/Wondermedia VT8500/WM8xxx series SoC PWM controller
 Required properties:
 - compatible: should be "via,vt8500-pwm"
 - reg: physical base address and length of the controller's registers
-- #pwm-cells: should be 2.  The first cell specifies the per-chip index
-  of the PWM to use and the second cell is the period in nanoseconds.
+- #pwm-cells: Should be 3. Number of cells being used to specify PWM property.
+  First cell specifies the per-chip index of the PWM to use, the second
+  cell is the period in nanoseconds and bit 0 in the third cell is used to
+  encode the polarity of PWM output. Set bit 0 of the third in PWM specifier
+  to 1 for inverse polarity & set to 0 for normal polarity.
 - clocks: phandle to the PWM source clock
 
 Example:
 
 pwm1: pwm@d8220000 {
-	#pwm-cells = <2>;
+	#pwm-cells = <3>;
 	compatible = "via,vt8500-pwm";
 	reg = <0xd8220000 0x1000>;
 	clocks = <&clkpwm>;
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index e513cd9..0e0bfa0 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -37,6 +37,18 @@ config PWM_AB8500
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-ab8500.
 
+config PWM_ATMEL_TCB
+	tristate "Atmel TC Block PWM support"
+	depends on ATMEL_TCLIB && OF
+	help
+	  Generic PWM framework driver for Atmel Timer Counter Block.
+
+	  A Timer Counter Block provides 6 PWM devices grouped by 2.
+	  Devices in a given group must have the same period.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-atmel-tcb.
+
 config PWM_BFIN
 	tristate "Blackfin PWM support"
 	depends on BFIN_GPTIMERS
@@ -47,7 +59,7 @@ config PWM_BFIN
 	  will be called pwm-bfin.
 
 config PWM_IMX
-	tristate "i.MX pwm support"
+	tristate "i.MX PWM support"
 	depends on ARCH_MXC
 	help
 	  Generic PWM framework driver for i.MX.
@@ -104,7 +116,7 @@ config PWM_PXA
 	  will be called pwm-pxa.
 
 config PWM_SAMSUNG
-	tristate "Samsung pwm support"
+	tristate "Samsung PWM support"
 	depends on PLAT_SAMSUNG
 	help
 	  Generic PWM framework driver for Samsung.
@@ -183,7 +195,7 @@ config PWM_TWL_LED
 	  will be called pwm-twl-led.
 
 config PWM_VT8500
-	tristate "vt8500 pwm support"
+	tristate "vt8500 PWM support"
 	depends on ARCH_VT8500
 	help
 	  Generic PWM framework driver for vt8500.
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 62a2963..94ba21e 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -1,5 +1,6 @@
 obj-$(CONFIG_PWM)		+= core.o
 obj-$(CONFIG_PWM_AB8500)	+= pwm-ab8500.o
+obj-$(CONFIG_PWM_ATMEL_TCB)	+= pwm-atmel-tcb.o
 obj-$(CONFIG_PWM_BFIN)		+= pwm-bfin.o
 obj-$(CONFIG_PWM_IMX)		+= pwm-imx.o
 obj-$(CONFIG_PWM_JZ4740)	+= pwm-jz4740.o
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 4a13da4..32221cb 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -211,6 +211,7 @@ int pwm_set_chip_data(struct pwm_device *pwm, void *data)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(pwm_set_chip_data);
 
 /**
  * pwm_get_chip_data() - get private chip data for a PWM
@@ -220,6 +221,7 @@ void *pwm_get_chip_data(struct pwm_device *pwm)
 {
 	return pwm ? pwm->chip_data : NULL;
 }
+EXPORT_SYMBOL_GPL(pwm_get_chip_data);
 
 /**
  * pwmchip_add() - register a new PWM chip
@@ -763,6 +765,18 @@ void devm_pwm_put(struct device *dev, struct pwm_device *pwm)
 }
 EXPORT_SYMBOL_GPL(devm_pwm_put);
 
+/**
+  * pwm_can_sleep() - report whether PWM access will sleep
+  * @pwm: PWM device
+  *
+  * It returns true if accessing the PWM can sleep, false otherwise.
+  */
+bool pwm_can_sleep(struct pwm_device *pwm)
+{
+	return pwm->chip->can_sleep;
+}
+EXPORT_SYMBOL_GPL(pwm_can_sleep);
+
 #ifdef CONFIG_DEBUG_FS
 static void pwm_dbg_show(struct pwm_chip *chip, struct seq_file *s)
 {
diff --git a/drivers/pwm/pwm-atmel-tcb.c b/drivers/pwm/pwm-atmel-tcb.c
new file mode 100644
index 0000000..16cb530
--- /dev/null
+++ b/drivers/pwm/pwm-atmel-tcb.c
@@ -0,0 +1,445 @@
+/*
+ * Copyright (C) Overkiz SAS 2012
+ *
+ * Author: Boris BREZILLON <b.brezillon@overkiz.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/atmel_tc.h>
+#include <linux/pwm.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+
+#define NPWM	6
+
+#define ATMEL_TC_ACMR_MASK	(ATMEL_TC_ACPA | ATMEL_TC_ACPC |	\
+				 ATMEL_TC_AEEVT | ATMEL_TC_ASWTRG)
+
+#define ATMEL_TC_BCMR_MASK	(ATMEL_TC_BCPB | ATMEL_TC_BCPC |	\
+				 ATMEL_TC_BEEVT | ATMEL_TC_BSWTRG)
+
+struct atmel_tcb_pwm_device {
+	enum pwm_polarity polarity;	/* PWM polarity */
+	unsigned div;			/* PWM clock divider */
+	unsigned duty;			/* PWM duty expressed in clk cycles */
+	unsigned period;		/* PWM period expressed in clk cycles */
+};
+
+struct atmel_tcb_pwm_chip {
+	struct pwm_chip chip;
+	spinlock_t lock;
+	struct atmel_tc *tc;
+	struct atmel_tcb_pwm_device *pwms[NPWM];
+};
+
+static inline struct atmel_tcb_pwm_chip *to_tcb_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct atmel_tcb_pwm_chip, chip);
+}
+
+static int atmel_tcb_pwm_set_polarity(struct pwm_chip *chip,
+				      struct pwm_device *pwm,
+				      enum pwm_polarity polarity)
+{
+	struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
+
+	tcbpwm->polarity = polarity;
+
+	return 0;
+}
+
+static int atmel_tcb_pwm_request(struct pwm_chip *chip,
+				 struct pwm_device *pwm)
+{
+	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
+	struct atmel_tcb_pwm_device *tcbpwm;
+	struct atmel_tc *tc = tcbpwmc->tc;
+	void __iomem *regs = tc->regs;
+	unsigned group = pwm->hwpwm / 2;
+	unsigned index = pwm->hwpwm % 2;
+	unsigned cmr;
+	int ret;
+
+	tcbpwm = devm_kzalloc(chip->dev, sizeof(*tcbpwm), GFP_KERNEL);
+	if (!tcbpwm)
+		return -ENOMEM;
+
+	ret = clk_enable(tc->clk[group]);
+	if (ret) {
+		devm_kfree(chip->dev, tcbpwm);
+		return ret;
+	}
+
+	pwm_set_chip_data(pwm, tcbpwm);
+	tcbpwm->polarity = PWM_POLARITY_NORMAL;
+	tcbpwm->duty = 0;
+	tcbpwm->period = 0;
+	tcbpwm->div = 0;
+
+	spin_lock(&tcbpwmc->lock);
+	cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR));
+	/*
+	 * Get init config from Timer Counter registers if
+	 * Timer Counter is already configured as a PWM generator.
+	 */
+	if (cmr & ATMEL_TC_WAVE) {
+		if (index == 0)
+			tcbpwm->duty =
+				__raw_readl(regs + ATMEL_TC_REG(group, RA));
+		else
+			tcbpwm->duty =
+				__raw_readl(regs + ATMEL_TC_REG(group, RB));
+
+		tcbpwm->div = cmr & ATMEL_TC_TCCLKS;
+		tcbpwm->period = __raw_readl(regs + ATMEL_TC_REG(group, RC));
+		cmr &= (ATMEL_TC_TCCLKS | ATMEL_TC_ACMR_MASK |
+			ATMEL_TC_BCMR_MASK);
+	} else
+		cmr = 0;
+
+	cmr |= ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO | ATMEL_TC_EEVT_XC0;
+	__raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR));
+	spin_unlock(&tcbpwmc->lock);
+
+	tcbpwmc->pwms[pwm->hwpwm] = tcbpwm;
+
+	return 0;
+}
+
+static void atmel_tcb_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
+	struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
+	struct atmel_tc *tc = tcbpwmc->tc;
+
+	clk_disable(tc->clk[pwm->hwpwm / 2]);
+	tcbpwmc->pwms[pwm->hwpwm] = NULL;
+	devm_kfree(chip->dev, tcbpwm);
+}
+
+static void atmel_tcb_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
+	struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
+	struct atmel_tc *tc = tcbpwmc->tc;
+	void __iomem *regs = tc->regs;
+	unsigned group = pwm->hwpwm / 2;
+	unsigned index = pwm->hwpwm % 2;
+	unsigned cmr;
+	enum pwm_polarity polarity = tcbpwm->polarity;
+
+	/*
+	 * If duty is 0 the timer will be stopped and we have to
+	 * configure the output correctly on software trigger:
+	 *  - set output to high if PWM_POLARITY_INVERSED
+	 *  - set output to low if PWM_POLARITY_NORMAL
+	 *
+	 * This is why we're reverting polarity in this case.
+	 */
+	if (tcbpwm->duty == 0)
+		polarity = !polarity;
+
+	spin_lock(&tcbpwmc->lock);
+	cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR));
+
+	/* flush old setting and set the new one */
+	if (index == 0) {
+		cmr &= ~ATMEL_TC_ACMR_MASK;
+		if (polarity == PWM_POLARITY_INVERSED)
+			cmr |= ATMEL_TC_ASWTRG_CLEAR;
+		else
+			cmr |= ATMEL_TC_ASWTRG_SET;
+	} else {
+		cmr &= ~ATMEL_TC_BCMR_MASK;
+		if (polarity == PWM_POLARITY_INVERSED)
+			cmr |= ATMEL_TC_BSWTRG_CLEAR;
+		else
+			cmr |= ATMEL_TC_BSWTRG_SET;
+	}
+
+	__raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR));
+
+	/*
+	 * Use software trigger to apply the new setting.
+	 * If both PWM devices in this group are disabled we stop the clock.
+	 */
+	if (!(cmr & (ATMEL_TC_ACPC | ATMEL_TC_BCPC)))
+		__raw_writel(ATMEL_TC_SWTRG | ATMEL_TC_CLKDIS,
+			     regs + ATMEL_TC_REG(group, CCR));
+	else
+		__raw_writel(ATMEL_TC_SWTRG, regs +
+			     ATMEL_TC_REG(group, CCR));
+
+	spin_unlock(&tcbpwmc->lock);
+}
+
+static int atmel_tcb_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
+	struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
+	struct atmel_tc *tc = tcbpwmc->tc;
+	void __iomem *regs = tc->regs;
+	unsigned group = pwm->hwpwm / 2;
+	unsigned index = pwm->hwpwm % 2;
+	u32 cmr;
+	enum pwm_polarity polarity = tcbpwm->polarity;
+
+	/*
+	 * If duty is 0 the timer will be stopped and we have to
+	 * configure the output correctly on software trigger:
+	 *  - set output to high if PWM_POLARITY_INVERSED
+	 *  - set output to low if PWM_POLARITY_NORMAL
+	 *
+	 * This is why we're reverting polarity in this case.
+	 */
+	if (tcbpwm->duty == 0)
+		polarity = !polarity;
+
+	spin_lock(&tcbpwmc->lock);
+	cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR));
+
+	/* flush old setting and set the new one */
+	cmr &= ~ATMEL_TC_TCCLKS;
+
+	if (index == 0) {
+		cmr &= ~ATMEL_TC_ACMR_MASK;
+
+		/* Set CMR flags according to given polarity */
+		if (polarity == PWM_POLARITY_INVERSED)
+			cmr |= ATMEL_TC_ASWTRG_CLEAR;
+		else
+			cmr |= ATMEL_TC_ASWTRG_SET;
+	} else {
+		cmr &= ~ATMEL_TC_BCMR_MASK;
+		if (polarity == PWM_POLARITY_INVERSED)
+			cmr |= ATMEL_TC_BSWTRG_CLEAR;
+		else
+			cmr |= ATMEL_TC_BSWTRG_SET;
+	}
+
+	/*
+	 * If duty is 0 or equal to period there's no need to register
+	 * a specific action on RA/RB and RC compare.
+	 * The output will be configured on software trigger and keep
+	 * this config till next config call.
+	 */
+	if (tcbpwm->duty != tcbpwm->period && tcbpwm->duty > 0) {
+		if (index == 0) {
+			if (polarity == PWM_POLARITY_INVERSED)
+				cmr |= ATMEL_TC_ACPA_SET | ATMEL_TC_ACPC_CLEAR;
+			else
+				cmr |= ATMEL_TC_ACPA_CLEAR | ATMEL_TC_ACPC_SET;
+		} else {
+			if (polarity == PWM_POLARITY_INVERSED)
+				cmr |= ATMEL_TC_BCPB_SET | ATMEL_TC_BCPC_CLEAR;
+			else
+				cmr |= ATMEL_TC_BCPB_CLEAR | ATMEL_TC_BCPC_SET;
+		}
+	}
+
+	__raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR));
+
+	if (index == 0)
+		__raw_writel(tcbpwm->duty, regs + ATMEL_TC_REG(group, RA));
+	else
+		__raw_writel(tcbpwm->duty, regs + ATMEL_TC_REG(group, RB));
+
+	__raw_writel(tcbpwm->period, regs + ATMEL_TC_REG(group, RC));
+
+	/* Use software trigger to apply the new setting */
+	__raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
+		     regs + ATMEL_TC_REG(group, CCR));
+	spin_unlock(&tcbpwmc->lock);
+	return 0;
+}
+
+static int atmel_tcb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+				int duty_ns, int period_ns)
+{
+	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
+	struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
+	unsigned group = pwm->hwpwm / 2;
+	unsigned index = pwm->hwpwm % 2;
+	struct atmel_tcb_pwm_device *atcbpwm = NULL;
+	struct atmel_tc *tc = tcbpwmc->tc;
+	int i;
+	int slowclk = 0;
+	unsigned period;
+	unsigned duty;
+	unsigned rate = clk_get_rate(tc->clk[group]);
+	unsigned long long min;
+	unsigned long long max;
+
+	/*
+	 * Find best clk divisor:
+	 * the smallest divisor which can fulfill the period_ns requirements.
+	 */
+	for (i = 0; i < 5; ++i) {
+		if (atmel_tc_divisors[i] == 0) {
+			slowclk = i;
+			continue;
+		}
+		min = div_u64((u64)NSEC_PER_SEC * atmel_tc_divisors[i], rate);
+		max = min << tc->tcb_config->counter_width;
+		if (max >= period_ns)
+			break;
+	}
+
+	/*
+	 * If none of the divisor are small enough to represent period_ns
+	 * take slow clock (32KHz).
+	 */
+	if (i == 5) {
+		i = slowclk;
+		rate = 32768;
+		min = div_u64(NSEC_PER_SEC, rate);
+		max = min << 16;
+
+		/* If period is too big return ERANGE error */
+		if (max < period_ns)
+			return -ERANGE;
+	}
+
+	duty = div_u64(duty_ns, min);
+	period = div_u64(period_ns, min);
+
+	if (index == 0)
+		atcbpwm = tcbpwmc->pwms[pwm->hwpwm + 1];
+	else
+		atcbpwm = tcbpwmc->pwms[pwm->hwpwm - 1];
+
+	/*
+	 * PWM devices provided by TCB driver are grouped by 2:
+	 * - group 0: PWM 0 & 1
+	 * - group 1: PWM 2 & 3
+	 * - group 2: PWM 4 & 5
+	 *
+	 * PWM devices in a given group must be configured with the
+	 * same period_ns.
+	 *
+	 * We're checking the period value of the second PWM device
+	 * in this group before applying the new config.
+	 */
+	if ((atcbpwm && atcbpwm->duty > 0 &&
+			atcbpwm->duty != atcbpwm->period) &&
+		(atcbpwm->div != i || atcbpwm->period != period)) {
+		dev_err(chip->dev,
+			"failed to configure period_ns: PWM group already configured with a different value\n");
+		return -EINVAL;
+	}
+
+	tcbpwm->period = period;
+	tcbpwm->div = i;
+	tcbpwm->duty = duty;
+
+	/* If the PWM is enabled, call enable to apply the new conf */
+	if (test_bit(PWMF_ENABLED, &pwm->flags))
+		atmel_tcb_pwm_enable(chip, pwm);
+
+	return 0;
+}
+
+static const struct pwm_ops atmel_tcb_pwm_ops = {
+	.request = atmel_tcb_pwm_request,
+	.free = atmel_tcb_pwm_free,
+	.config = atmel_tcb_pwm_config,
+	.set_polarity = atmel_tcb_pwm_set_polarity,
+	.enable = atmel_tcb_pwm_enable,
+	.disable = atmel_tcb_pwm_disable,
+};
+
+static int atmel_tcb_pwm_probe(struct platform_device *pdev)
+{
+	struct atmel_tcb_pwm_chip *tcbpwm;
+	struct device_node *np = pdev->dev.of_node;
+	struct atmel_tc *tc;
+	int err;
+	int tcblock;
+
+	err = of_property_read_u32(np, "tc-block", &tcblock);
+	if (err < 0) {
+		dev_err(&pdev->dev,
+			"failed to get Timer Counter Block number from device tree (error: %d)\n",
+			err);
+		return err;
+	}
+
+	tc = atmel_tc_alloc(tcblock, "tcb-pwm");
+	if (tc == NULL) {
+		dev_err(&pdev->dev, "failed to allocate Timer Counter Block\n");
+		return -ENOMEM;
+	}
+
+	tcbpwm = devm_kzalloc(&pdev->dev, sizeof(*tcbpwm), GFP_KERNEL);
+	if (tcbpwm == NULL) {
+		atmel_tc_free(tc);
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	tcbpwm->chip.dev = &pdev->dev;
+	tcbpwm->chip.ops = &atmel_tcb_pwm_ops;
+	tcbpwm->chip.of_xlate = of_pwm_xlate_with_flags;
+	tcbpwm->chip.of_pwm_n_cells = 3;
+	tcbpwm->chip.base = -1;
+	tcbpwm->chip.npwm = NPWM;
+	tcbpwm->tc = tc;
+
+	spin_lock_init(&tcbpwm->lock);
+
+	err = pwmchip_add(&tcbpwm->chip);
+	if (err < 0) {
+		atmel_tc_free(tc);
+		return err;
+	}
+
+	platform_set_drvdata(pdev, tcbpwm);
+
+	return 0;
+}
+
+static int atmel_tcb_pwm_remove(struct platform_device *pdev)
+{
+	struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev);
+	int err;
+
+	err = pwmchip_remove(&tcbpwm->chip);
+	if (err < 0)
+		return err;
+
+	atmel_tc_free(tcbpwm->tc);
+
+	return 0;
+}
+
+static const struct of_device_id atmel_tcb_pwm_dt_ids[] = {
+	{ .compatible = "atmel,tcb-pwm", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, atmel_tcb_pwm_dt_ids);
+
+static struct platform_driver atmel_tcb_pwm_driver = {
+	.driver = {
+		.name = "atmel-tcb-pwm",
+		.of_match_table = atmel_tcb_pwm_dt_ids,
+	},
+	.probe = atmel_tcb_pwm_probe,
+	.remove = atmel_tcb_pwm_remove,
+};
+module_platform_driver(atmel_tcb_pwm_driver);
+
+MODULE_AUTHOR("Boris BREZILLON <b.brezillon@overkiz.com>");
+MODULE_DESCRIPTION("Atmel Timer Counter Pulse Width Modulation Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c
index 71900e8..af3ab48 100644
--- a/drivers/pwm/pwm-tegra.c
+++ b/drivers/pwm/pwm-tegra.c
@@ -233,7 +233,6 @@ static int tegra_pwm_remove(struct platform_device *pdev)
 	return pwmchip_remove(&pc->chip);
 }
 
-#ifdef CONFIG_OF
 static struct of_device_id tegra_pwm_of_match[] = {
 	{ .compatible = "nvidia,tegra20-pwm" },
 	{ .compatible = "nvidia,tegra30-pwm" },
@@ -241,12 +240,11 @@ static struct of_device_id tegra_pwm_of_match[] = {
 };
 
 MODULE_DEVICE_TABLE(of, tegra_pwm_of_match);
-#endif
 
 static struct platform_driver tegra_pwm_driver = {
 	.driver = {
 		.name = "tegra-pwm",
-		.of_match_table = of_match_ptr(tegra_pwm_of_match),
+		.of_match_table = tegra_pwm_of_match,
 	},
 	.probe = tegra_pwm_probe,
 	.remove = tegra_pwm_remove,
diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c
index 27a67d6..22e96e2 100644
--- a/drivers/pwm/pwm-tiecap.c
+++ b/drivers/pwm/pwm-tiecap.c
@@ -41,10 +41,17 @@
 #define ECCTL2_SYNC_SEL_DISA	(BIT(7) | BIT(6))
 #define ECCTL2_TSCTR_FREERUN	BIT(4)
 
+struct ecap_context {
+	u32	cap3;
+	u32	cap4;
+	u16	ecctl2;
+};
+
 struct ecap_pwm_chip {
 	struct pwm_chip	chip;
 	unsigned int	clk_rate;
 	void __iomem	*mmio_base;
+	struct ecap_context ctx;
 };
 
 static inline struct ecap_pwm_chip *to_ecap_pwm_chip(struct pwm_chip *chip)
@@ -288,11 +295,57 @@ static int ecap_pwm_remove(struct platform_device *pdev)
 	return pwmchip_remove(&pc->chip);
 }
 
+void ecap_pwm_save_context(struct ecap_pwm_chip *pc)
+{
+	pm_runtime_get_sync(pc->chip.dev);
+	pc->ctx.ecctl2 = readw(pc->mmio_base + ECCTL2);
+	pc->ctx.cap4 = readl(pc->mmio_base + CAP4);
+	pc->ctx.cap3 = readl(pc->mmio_base + CAP3);
+	pm_runtime_put_sync(pc->chip.dev);
+}
+
+void ecap_pwm_restore_context(struct ecap_pwm_chip *pc)
+{
+	writel(pc->ctx.cap3, pc->mmio_base + CAP3);
+	writel(pc->ctx.cap4, pc->mmio_base + CAP4);
+	writew(pc->ctx.ecctl2, pc->mmio_base + ECCTL2);
+}
+
+static int ecap_pwm_suspend(struct device *dev)
+{
+	struct ecap_pwm_chip *pc = dev_get_drvdata(dev);
+	struct pwm_device *pwm = pc->chip.pwms;
+
+	ecap_pwm_save_context(pc);
+
+	/* Disable explicitly if PWM is running */
+	if (test_bit(PWMF_ENABLED, &pwm->flags))
+		pm_runtime_put_sync(dev);
+
+	return 0;
+}
+
+static int ecap_pwm_resume(struct device *dev)
+{
+	struct ecap_pwm_chip *pc = dev_get_drvdata(dev);
+	struct pwm_device *pwm = pc->chip.pwms;
+
+	/* Enable explicitly if PWM was running */
+	if (test_bit(PWMF_ENABLED, &pwm->flags))
+		pm_runtime_get_sync(dev);
+
+	ecap_pwm_restore_context(pc);
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ecap_pwm_pm_ops, ecap_pwm_suspend, ecap_pwm_resume);
+
 static struct platform_driver ecap_pwm_driver = {
 	.driver = {
 		.name	= "ecap",
 		.owner	= THIS_MODULE,
 		.of_match_table = ecap_of_match,
+		.pm	= &ecap_pwm_pm_ops,
 	},
 	.probe = ecap_pwm_probe,
 	.remove = ecap_pwm_remove,
diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
index 5a13995..8b4c86f 100644
--- a/drivers/pwm/pwm-tiehrpwm.c
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -113,6 +113,17 @@
 
 #define NUM_PWM_CHANNEL		2	/* EHRPWM channels */
 
+struct ehrpwm_context {
+	u16 tbctl;
+	u16 tbprd;
+	u16 cmpa;
+	u16 cmpb;
+	u16 aqctla;
+	u16 aqctlb;
+	u16 aqsfrc;
+	u16 aqcsfrc;
+};
+
 struct ehrpwm_pwm_chip {
 	struct pwm_chip	chip;
 	unsigned int	clk_rate;
@@ -120,6 +131,7 @@ struct ehrpwm_pwm_chip {
 	unsigned long period_cycles[NUM_PWM_CHANNEL];
 	enum pwm_polarity polarity[NUM_PWM_CHANNEL];
 	struct	clk	*tbclk;
+	struct ehrpwm_context ctx;
 };
 
 static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip)
@@ -127,6 +139,11 @@ static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip)
 	return container_of(chip, struct ehrpwm_pwm_chip, chip);
 }
 
+static u16 ehrpwm_read(void *base, int offset)
+{
+	return readw(base + offset);
+}
+
 static void ehrpwm_write(void *base, int offset, unsigned int val)
 {
 	writew(val & 0xFFFF, base + offset);
@@ -318,6 +335,7 @@ static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
 	unsigned short aqcsfrc_val, aqcsfrc_mask;
+	int ret;
 
 	/* Leave clock enabled on enabling PWM */
 	pm_runtime_get_sync(chip->dev);
@@ -341,7 +359,12 @@ static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 	configure_polarity(pc, pwm->hwpwm);
 
 	/* Enable TBCLK before enabling PWM device */
-	clk_enable(pc->tbclk);
+	ret = clk_prepare_enable(pc->tbclk);
+	if (ret) {
+		pr_err("Failed to enable TBCLK for %s\n",
+				dev_name(pc->chip.dev));
+		return ret;
+	}
 
 	/* Enable time counter for free_run */
 	ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_FREE_RUN);
@@ -372,7 +395,7 @@ static void ehrpwm_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 	ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val);
 
 	/* Disabling TBCLK on PWM disable */
-	clk_disable(pc->tbclk);
+	clk_disable_unprepare(pc->tbclk);
 
 	/* Stop Time base counter */
 	ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_STOP_NEXT);
@@ -510,11 +533,77 @@ static int ehrpwm_pwm_remove(struct platform_device *pdev)
 	return pwmchip_remove(&pc->chip);
 }
 
+void ehrpwm_pwm_save_context(struct ehrpwm_pwm_chip *pc)
+{
+	pm_runtime_get_sync(pc->chip.dev);
+	pc->ctx.tbctl = ehrpwm_read(pc->mmio_base, TBCTL);
+	pc->ctx.tbprd = ehrpwm_read(pc->mmio_base, TBPRD);
+	pc->ctx.cmpa = ehrpwm_read(pc->mmio_base, CMPA);
+	pc->ctx.cmpb = ehrpwm_read(pc->mmio_base, CMPB);
+	pc->ctx.aqctla = ehrpwm_read(pc->mmio_base, AQCTLA);
+	pc->ctx.aqctlb = ehrpwm_read(pc->mmio_base, AQCTLB);
+	pc->ctx.aqsfrc = ehrpwm_read(pc->mmio_base, AQSFRC);
+	pc->ctx.aqcsfrc = ehrpwm_read(pc->mmio_base, AQCSFRC);
+	pm_runtime_put_sync(pc->chip.dev);
+}
+
+void ehrpwm_pwm_restore_context(struct ehrpwm_pwm_chip *pc)
+{
+	ehrpwm_write(pc->mmio_base, TBPRD, pc->ctx.tbprd);
+	ehrpwm_write(pc->mmio_base, CMPA, pc->ctx.cmpa);
+	ehrpwm_write(pc->mmio_base, CMPB, pc->ctx.cmpb);
+	ehrpwm_write(pc->mmio_base, AQCTLA, pc->ctx.aqctla);
+	ehrpwm_write(pc->mmio_base, AQCTLB, pc->ctx.aqctlb);
+	ehrpwm_write(pc->mmio_base, AQSFRC, pc->ctx.aqsfrc);
+	ehrpwm_write(pc->mmio_base, AQCSFRC, pc->ctx.aqcsfrc);
+	ehrpwm_write(pc->mmio_base, TBCTL, pc->ctx.tbctl);
+}
+
+static int ehrpwm_pwm_suspend(struct device *dev)
+{
+	struct ehrpwm_pwm_chip *pc = dev_get_drvdata(dev);
+	int i;
+
+	ehrpwm_pwm_save_context(pc);
+	for (i = 0; i < pc->chip.npwm; i++) {
+		struct pwm_device *pwm = &pc->chip.pwms[i];
+
+		if (!test_bit(PWMF_ENABLED, &pwm->flags))
+			continue;
+
+		/* Disable explicitly if PWM is running */
+		pm_runtime_put_sync(dev);
+	}
+	return 0;
+}
+
+static int ehrpwm_pwm_resume(struct device *dev)
+{
+	struct ehrpwm_pwm_chip *pc = dev_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < pc->chip.npwm; i++) {
+		struct pwm_device *pwm = &pc->chip.pwms[i];
+
+		if (!test_bit(PWMF_ENABLED, &pwm->flags))
+			continue;
+
+		/* Enable explicitly if PWM was running */
+		pm_runtime_get_sync(dev);
+	}
+	ehrpwm_pwm_restore_context(pc);
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ehrpwm_pwm_pm_ops, ehrpwm_pwm_suspend,
+		ehrpwm_pwm_resume);
+
 static struct platform_driver ehrpwm_pwm_driver = {
 	.driver = {
 		.name	= "ehrpwm",
 		.owner	= THIS_MODULE,
 		.of_match_table = ehrpwm_of_match,
+		.pm	= &ehrpwm_pwm_pm_ops,
 	},
 	.probe = ehrpwm_pwm_probe,
 	.remove = ehrpwm_pwm_remove,
diff --git a/drivers/pwm/pwm-twl-led.c b/drivers/pwm/pwm-twl-led.c
index 9dfa0f3..83e25d4 100644
--- a/drivers/pwm/pwm-twl-led.c
+++ b/drivers/pwm/pwm-twl-led.c
@@ -300,6 +300,7 @@ static int twl_pwmled_probe(struct platform_device *pdev)
 
 	twl->chip.dev = &pdev->dev;
 	twl->chip.base = -1;
+	twl->chip.can_sleep = true;
 
 	mutex_init(&twl->mutex);
 
diff --git a/drivers/pwm/pwm-twl.c b/drivers/pwm/pwm-twl.c
index e65db95..bf3fda2 100644
--- a/drivers/pwm/pwm-twl.c
+++ b/drivers/pwm/pwm-twl.c
@@ -200,8 +200,7 @@ out:
 
 static void twl4030_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 {
-	struct twl_pwm_chip *twl = container_of(chip, struct twl_pwm_chip,
-						chip);
+	struct twl_pwm_chip *twl = to_twl(chip);
 	int ret;
 	u8 val, mask;
 
@@ -231,8 +230,7 @@ out:
 
 static int twl6030_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
-	struct twl_pwm_chip *twl = container_of(chip, struct twl_pwm_chip,
-						chip);
+	struct twl_pwm_chip *twl = to_twl(chip);
 	int ret;
 	u8 val;
 
@@ -255,8 +253,7 @@ out:
 
 static void twl6030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
-	struct twl_pwm_chip *twl = container_of(chip, struct twl_pwm_chip,
-						chip);
+	struct twl_pwm_chip *twl = to_twl(chip);
 	int ret;
 	u8 val;
 
@@ -315,6 +312,7 @@ static int twl_pwm_probe(struct platform_device *pdev)
 	twl->chip.dev = &pdev->dev;
 	twl->chip.base = -1;
 	twl->chip.npwm = 2;
+	twl->chip.can_sleep = true;
 
 	mutex_init(&twl->mutex);
 
diff --git a/drivers/pwm/pwm-vt8500.c b/drivers/pwm/pwm-vt8500.c
index f9de9b2..69effd1 100644
--- a/drivers/pwm/pwm-vt8500.c
+++ b/drivers/pwm/pwm-vt8500.c
@@ -36,6 +36,25 @@
  */
 #define VT8500_NR_PWMS	2
 
+#define REG_CTRL(pwm)		(((pwm) << 4) + 0x00)
+#define REG_SCALAR(pwm)		(((pwm) << 4) + 0x04)
+#define REG_PERIOD(pwm)		(((pwm) << 4) + 0x08)
+#define REG_DUTY(pwm)		(((pwm) << 4) + 0x0C)
+#define REG_STATUS		0x40
+
+#define CTRL_ENABLE		BIT(0)
+#define CTRL_INVERT		BIT(1)
+#define CTRL_AUTOLOAD		BIT(2)
+#define CTRL_STOP_IMM		BIT(3)
+#define CTRL_LOAD_PRESCALE	BIT(4)
+#define CTRL_LOAD_PERIOD	BIT(5)
+
+#define STATUS_CTRL_UPDATE	BIT(0)
+#define STATUS_SCALAR_UPDATE	BIT(1)
+#define STATUS_PERIOD_UPDATE	BIT(2)
+#define STATUS_DUTY_UPDATE	BIT(3)
+#define STATUS_ALL_UPDATE	0x0F
+
 struct vt8500_chip {
 	struct pwm_chip chip;
 	void __iomem *base;
@@ -45,15 +64,17 @@ struct vt8500_chip {
 #define to_vt8500_chip(chip)	container_of(chip, struct vt8500_chip, chip)
 
 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
-static inline void pwm_busy_wait(void __iomem *reg, u8 bitmask)
+static inline void pwm_busy_wait(struct vt8500_chip *vt8500, int nr, u8 bitmask)
 {
 	int loops = msecs_to_loops(10);
-	while ((readb(reg) & bitmask) && --loops)
+	u32 mask = bitmask << (nr << 8);
+
+	while ((readl(vt8500->base + REG_STATUS) & mask) && --loops)
 		cpu_relax();
 
 	if (unlikely(!loops))
-		pr_warn("Waiting for status bits 0x%x to clear timed out\n",
-			   bitmask);
+		dev_warn(vt8500->chip.dev, "Waiting for status bits 0x%x to clear timed out\n",
+			 mask);
 }
 
 static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
@@ -63,6 +84,7 @@ static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	unsigned long long c;
 	unsigned long period_cycles, prescale, pv, dc;
 	int err;
+	u32 val;
 
 	err = clk_enable(vt8500->clk);
 	if (err < 0) {
@@ -91,14 +113,19 @@ static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	do_div(c, period_ns);
 	dc = c;
 
-	pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 1));
-	writel(prescale, vt8500->base + 0x4 + (pwm->hwpwm << 4));
+	writel(prescale, vt8500->base + REG_SCALAR(pwm->hwpwm));
+	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_SCALAR_UPDATE);
 
-	pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 2));
-	writel(pv, vt8500->base + 0x8 + (pwm->hwpwm << 4));
+	writel(pv, vt8500->base + REG_PERIOD(pwm->hwpwm));
+	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_PERIOD_UPDATE);
 
-	pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 3));
-	writel(dc, vt8500->base + 0xc + (pwm->hwpwm << 4));
+	writel(dc, vt8500->base + REG_DUTY(pwm->hwpwm));
+	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_DUTY_UPDATE);
+
+	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
+	val |= CTRL_AUTOLOAD;
+	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
+	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);
 
 	clk_disable(vt8500->clk);
 	return 0;
@@ -106,8 +133,9 @@ static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 
 static int vt8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
-	int err;
 	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
+	int err;
+	u32 val;
 
 	err = clk_enable(vt8500->clk);
 	if (err < 0) {
@@ -115,25 +143,52 @@ static int vt8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 		return err;
 	}
 
-	pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 0));
-	writel(5, vt8500->base + (pwm->hwpwm << 4));
+	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
+	val |= CTRL_ENABLE;
+	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
+	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);
+
 	return 0;
 }
 
 static void vt8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
+	u32 val;
 
-	pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 0));
-	writel(0, vt8500->base + (pwm->hwpwm << 4));
+	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
+	val &= ~CTRL_ENABLE;
+	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
+	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);
 
 	clk_disable(vt8500->clk);
 }
 
+static int vt8500_pwm_set_polarity(struct pwm_chip *chip,
+				   struct pwm_device *pwm,
+				   enum pwm_polarity polarity)
+{
+	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
+	u32 val;
+
+	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
+
+	if (polarity == PWM_POLARITY_INVERSED)
+		val |= CTRL_INVERT;
+	else
+		val &= ~CTRL_INVERT;
+
+	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
+	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);
+
+	return 0;
+}
+
 static struct pwm_ops vt8500_pwm_ops = {
 	.enable = vt8500_pwm_enable,
 	.disable = vt8500_pwm_disable,
 	.config = vt8500_pwm_config,
+	.set_polarity = vt8500_pwm_set_polarity,
 	.owner = THIS_MODULE,
 };
 
@@ -163,6 +218,8 @@ static int vt8500_pwm_probe(struct platform_device *pdev)
 
 	chip->chip.dev = &pdev->dev;
 	chip->chip.ops = &vt8500_pwm_ops;
+	chip->chip.of_xlate = of_pwm_xlate_with_flags;
+	chip->chip.of_pwm_n_cells = 3;
 	chip->chip.base = -1;
 	chip->chip.npwm = VT8500_NR_PWMS;
 
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index f2f4c43..fa00304 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -41,10 +41,9 @@ static int pwm_backlight_update_status(struct backlight_device *bl)
 	int brightness = bl->props.brightness;
 	int max = bl->props.max_brightness;
 
-	if (bl->props.power != FB_BLANK_UNBLANK)
-		brightness = 0;
-
-	if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+	if (bl->props.power != FB_BLANK_UNBLANK ||
+	    bl->props.fb_blank != FB_BLANK_UNBLANK ||
+	    bl->props.state & BL_CORE_FBBLANK)
 		brightness = 0;
 
 	if (pb->notify)
@@ -135,12 +134,6 @@ static int pwm_backlight_parse_dt(struct device *dev,
 		if (ret < 0)
 			return ret;
 
-		if (value >= data->max_brightness) {
-			dev_warn(dev, "invalid default brightness level: %u, using %u\n",
-				 value, data->max_brightness - 1);
-			value = data->max_brightness - 1;
-		}
-
 		data->dft_brightness = value;
 		data->max_brightness--;
 	}
@@ -249,6 +242,13 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 		goto err_alloc;
 	}
 
+	if (data->dft_brightness > data->max_brightness) {
+		dev_warn(&pdev->dev,
+			 "invalid default brightness level: %u, using %u\n",
+			 data->dft_brightness, data->max_brightness);
+		data->dft_brightness = data->max_brightness;
+	}
+
 	bl->props.brightness = data->dft_brightness;
 	backlight_update_status(bl);
 
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index 70655a2..a4df204 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -146,6 +146,8 @@ struct pwm_ops {
  * @base: number of first PWM controlled by this chip
  * @npwm: number of PWMs controlled by this chip
  * @pwms: array of PWM devices allocated by the framework
+ * @can_sleep: must be true if the .config(), .enable() or .disable()
+ *             operations may sleep
  */
 struct pwm_chip {
 	struct device		*dev;
@@ -159,6 +161,7 @@ struct pwm_chip {
 	struct pwm_device *	(*of_xlate)(struct pwm_chip *pc,
 					    const struct of_phandle_args *args);
 	unsigned int		of_pwm_n_cells;
+	bool			can_sleep;
 };
 
 #if IS_ENABLED(CONFIG_PWM)
@@ -182,6 +185,8 @@ struct pwm_device *devm_pwm_get(struct device *dev, const char *con_id);
 struct pwm_device *devm_of_pwm_get(struct device *dev, struct device_node *np,
 				   const char *con_id);
 void devm_pwm_put(struct device *dev, struct pwm_device *pwm);
+
+bool pwm_can_sleep(struct pwm_device *pwm);
 #else
 static inline int pwm_set_chip_data(struct pwm_device *pwm, void *data)
 {
@@ -242,6 +247,11 @@ static inline struct pwm_device *devm_of_pwm_get(struct device *dev,
 static inline void devm_pwm_put(struct device *dev, struct pwm_device *pwm)
 {
 }
+
+static inline bool pwm_can_sleep(struct pwm_device *pwm)
+{
+	return false;
+}
 #endif
 
 struct pwm_lookup {
