Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

4162cf64 · Linus Torvalds <[email protected]> · 2011-01-11 16:32:41 -08:00

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (67 commits)
  cxgb4vf: recover from failure in cxgb4vf_open()
  netfilter: ebtables: make broute table work again
  netfilter: fix race in conntrack between dump_table and destroy
  ah: reload pointers to skb data after calling skb_cow_data()
  ah: update maximum truncated ICV length
  xfrm: check trunc_len in XFRMA_ALG_AUTH_TRUNC
  ehea: Increase the skb array usage
  net/fec: remove config FEC2 as it's used nowhere
  pcnet_cs: add new_id
  tcp: disallow bind() to reuse addr/port
  net/r8169: Update the function of parsing firmware
  net: ppp: use {get,put}_unaligned_be{16,32}
  CAIF: Fix IPv6 support in receive path for GPRS/3G
  arp: allow to invalidate specific ARP entries
  net_sched: factorize qdisc stats handling
  mlx4: Call alloc_etherdev to allocate RX and TX queues
  net: Add alloc_netdev_mqs function
  caif: don't set connection request param size before copying data
  cxgb4vf: fix mailbox data/control coherency domain race
  qlcnic: change module parameter permissions
  ...

Commit: 4162cf64973df51fc885825bc9ca4d055891c49f
Parents: fb7b5a95 · 343a8d13

Merge commit. Changes below are compared with the first parent: fb7b5a95.

Changes

109 files changed · +2901 −1867

File	Status	Add	Del	Content
Documentation/networking/dccp.txt	modified	+1	−0	View file
drivers/atm/ambassador.c	modified	+12	−7	View file
drivers/net/Kconfig	modified	+1	−8	View file
drivers/net/bfin_mac.c	modified	+37	−37	View file
drivers/net/bfin_mac.h	modified	+10	−1	View file
drivers/net/bnx2x/bnx2x.h	modified	+1	−0	View file
drivers/net/bnx2x/bnx2x_dump.h	modified	+569	−419	View file
drivers/net/bnx2x/bnx2x_ethtool.c	modified	+21	−1	View file
drivers/net/bnx2x/bnx2x_init.h	modified	+220	−0	View file
drivers/net/bnx2x/bnx2x_main.c	modified	+12	−58	View file
drivers/net/bnx2x/bnx2x_reg.h	modified	+74	−0	View file
drivers/net/bnx2x/bnx2x_stats.c	modified	+5	−0	View file
drivers/net/cxgb4vf/cxgb4vf_main.c	modified	+10	−5	View file
drivers/net/cxgb4vf/t4vf_hw.c	modified	+11	−0	View file
drivers/net/e1000/e1000_hw.c	modified	+260	−68	View file
drivers/net/e1000/e1000_hw.h	modified	+56	−3	View file
drivers/net/e1000/e1000_main.c	modified	+35	−0	View file
drivers/net/e1000/e1000_osdep.h	modified	+14	−5	View file
drivers/net/e1000e/82571.c	modified	+70	−7	View file
drivers/net/e1000e/e1000.h	modified	+3	−0	View file
drivers/net/e1000e/es2lan.c	modified	+2	−2	View file
drivers/net/e1000e/ethtool.c	modified	+34	−20	View file
drivers/net/e1000e/hw.h	modified	+1	−0	View file
drivers/net/e1000e/ich8lan.c	modified	+28	−49	View file
drivers/net/e1000e/lib.c	modified	+2	−1	View file
drivers/net/e1000e/netdev.c	modified	+31	−22	View file
drivers/net/e1000e/phy.c	modified	+17	−23	View file
drivers/net/ehea/ehea.h	modified	+1	−1	View file
drivers/net/ehea/ehea_main.c	modified	+2	−4	View file
drivers/net/fec.c	modified	+180	−68	View file
drivers/net/fec.h	modified	+3	−2	View file
drivers/net/forcedeth.c	modified	+12	−22	View file
drivers/net/hamradio/yam.c	modified	+2	−2	View file
drivers/net/ixgbe/ixgbe.h	modified	+5	−16	View file
drivers/net/ixgbe/ixgbe_82599.c	modified	+294	−455	View file
drivers/net/ixgbe/ixgbe_ethtool.c	modified	+98	−44	View file
drivers/net/ixgbe/ixgbe_main.c	modified	+124	−45	View file
drivers/net/ixgbe/ixgbe_type.h	modified	+60	−31	View file
drivers/net/mlx4/en_netdev.c	modified	+2	−1	View file
drivers/net/pcmcia/pcnet_cs.c	modified	+1	−0	View file
drivers/net/ppp_async.c	modified	+5	−5	View file
drivers/net/ppp_deflate.c	modified	+4	−5	View file
drivers/net/ppp_generic.c	modified	+4	−5	View file
drivers/net/ppp_mppe.c	modified	+3	−4	View file
drivers/net/ppp_synctty.c	modified	+2	−1	View file
drivers/net/qlcnic/qlcnic.h	modified	+22	−2	View file
drivers/net/qlcnic/qlcnic_ethtool.c	modified	+1	−1	View file
drivers/net/qlcnic/qlcnic_init.c	modified	+62	−1	View file
drivers/net/qlcnic/qlcnic_main.c	modified	+5	−5	View file
drivers/net/r8169.c	modified	+121	−22	View file
drivers/net/sky2.c	modified	+67	−76	View file
drivers/net/sky2.h	modified	+2	−4	View file
drivers/net/xen-netfront.c	modified	+1	−1	View file
include/linux/bfin_mac.h	modified	+1	−0	View file
include/linux/etherdevice.h	modified	+3	−1	View file
include/linux/fec.h	modified	+3	−0	View file
include/linux/if_bridge.h	modified	+1	−1	View file
include/linux/netdevice.h	modified	+11	−13	View file
include/linux/netfilter/x_tables.h	modified	+5	−5	View file
include/net/ah.h	modified	+1	−1	View file
include/net/arp.h	modified	+1	−0	View file
include/net/phonet/phonet.h	modified	+2	−2	View file
include/net/sch_generic.h	modified	+14	−6	View file
include/net/sock.h	modified	+4	−0	View file
net/caif/caif_socket.c	modified	+1	−1	View file
net/caif/chnl_net.c	modified	+17	−1	View file
net/core/dev.c	modified	+79	−70	View file
net/core/filter.c	modified	+1	−1	View file
net/core/rtnetlink.c	modified	+1	−1	View file
net/dccp/dccp.h	modified	+2	−1	View file
net/dccp/input.c	modified	+1	−1	View file
net/dccp/sysctl.c	modified	+3	−1	View file
net/ethernet/eth.c	modified	+7	−5	View file
net/ipv4/ah4.c	modified	+4	−3	View file
net/ipv4/arp.c	modified	+18	−11	View file
net/ipv4/inet_connection_sock.c	modified	+3	−2	View file
net/ipv4/inet_diag.c	modified	+1	−1	View file
net/ipv4/netfilter/arp_tables.c	modified	+14	−31	View file
net/ipv4/netfilter/ip_tables.c	modified	+14	−31	View file
net/ipv6/ah6.c	modified	+5	−3	View file
net/ipv6/inet6_connection_sock.c	modified	+1	−1	View file
net/ipv6/netfilter/ip6_tables.c	modified	+14	−31	View file
net/netfilter/nf_conntrack_netlink.c	modified	+7	−11	View file
net/netfilter/x_tables.c	modified	+2	−1	View file
net/netlink/genetlink.c	modified	+1	−1	View file
net/phonet/af_phonet.c	modified	+3	−3	View file
net/sched/act_csum.c	modified	+1	−2	View file
net/sched/act_ipt.c	modified	+1	−2	View file
net/sched/act_mirred.c	modified	+1	−2	View file
net/sched/act_nat.c	modified	+1	−2	View file
net/sched/act_pedit.c	modified	+1	−2	View file
net/sched/act_police.c	modified	+1	−2	View file
net/sched/act_simple.c	modified	+1	−2	View file
net/sched/act_skbedit.c	modified	+1	−2	View file
net/sched/sch_atm.c	modified	+2	−4	View file
net/sched/sch_cbq.c	modified	+2	−4	View file
net/sched/sch_drr.c	modified	+2	−6	View file
net/sched/sch_dsmark.c	modified	+1	−2	View file
net/sched/sch_hfsc.c	modified	+2	−4	View file
net/sched/sch_htb.c	modified	+6	−11	View file
net/sched/sch_ingress.c	modified	+1	−2	View file
net/sched/sch_multiq.c	modified	+1	−2	View file
net/sched/sch_netem.c	modified	+2	−4	View file
net/sched/sch_prio.c	modified	+1	−2	View file
net/sched/sch_red.c	modified	+1	−2	View file
net/sched/sch_sfq.c	modified	+1	−2	View file
net/sched/sch_tbf.c	modified	+1	−2	View file
net/sched/sch_teql.c	modified	+1	−2	View file
net/xfrm/xfrm_user.c	modified	+4	−2	View file

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/networking/dccp.txt

View file

diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt
index b395ca6..811872b 100644
--- a/Documentation/networking/dccp.txt
+++ b/Documentation/networking/dccp.txt
@@ -167,6 +167,7 @@ rx_ccid = 2
 seq_window = 100
 	The initial sequence window (sec. 7.5.2) of the sender. This influences
 	the local ackno validity and the remote seqno validity windows (7.5.1).
+	Values in the range Wmin = 32 (RFC 4340, 7.5.2) up to 2^32-1 can be set.
 
 tx_qlen = 5
 	The size of the transmit buffer in packets. A value of 0 corresponds

drivers/atm/ambassador.c

View file

diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c
index ffe9b65..9f47e86 100644
--- a/drivers/atm/ambassador.c
+++ b/drivers/atm/ambassador.c
@@ -1926,8 +1926,9 @@ static int __devinit ucode_init (loader_block * lb, amb_dev * dev) {
   const struct firmware *fw;
   unsigned long start_address;
   const struct ihex_binrec *rec;
+  const char *errmsg = 0;
   int res;
-  
+
   res = request_ihex_firmware(&fw, "atmsar11.fw", &dev->pci_dev->dev);
   if (res) {
     PRINTK (KERN_ERR, "Cannot load microcode data");
@@ -1937,8 +1938,8 @@ static int __devinit ucode_init (loader_block * lb, amb_dev * dev) {
   /* First record contains just the start address */
   rec = (const struct ihex_binrec *)fw->data;
   if (be16_to_cpu(rec->len) != sizeof(__be32) || be32_to_cpu(rec->addr)) {
-    PRINTK (KERN_ERR, "Bad microcode data (no start record)");
-    return -EINVAL;
+    errmsg = "no start record";
+    goto fail;
   }
   start_address = be32_to_cpup((__be32 *)rec->data);
 
@@ -1950,12 +1951,12 @@ static int __devinit ucode_init (loader_block * lb, amb_dev * dev) {
     PRINTD (DBG_LOAD, "starting region (%x, %u)", be32_to_cpu(rec->addr),
 	    be16_to_cpu(rec->len));
     if (be16_to_cpu(rec->len) > 4 * MAX_TRANSFER_DATA) {
-	    PRINTK (KERN_ERR, "Bad microcode data (record too long)");
-	    return -EINVAL;
+	    errmsg = "record too long";
+	    goto fail;
     }
     if (be16_to_cpu(rec->len) & 3) {
-	    PRINTK (KERN_ERR, "Bad microcode data (odd number of bytes)");
-	    return -EINVAL;
+	    errmsg = "odd number of bytes";
+	    goto fail;
     }
     res = loader_write(lb, dev, rec);
     if (res)
@@ -1970,6 +1971,10 @@ static int __devinit ucode_init (loader_block * lb, amb_dev * dev) {
     res = loader_start(lb, dev, start_address);
 
   return res;
+fail:
+  release_firmware(fw);
+  PRINTK(KERN_ERR, "Bad microcode data (%s)", errmsg);
+  return -EINVAL;
 }
 
 /********** give adapter parameters **********/

drivers/net/Kconfig

View file

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 3fda24a..ff652c7 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1944,19 +1944,12 @@ config 68360_ENET
 config FEC
 	bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
 	depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
-		MACH_MX27 || ARCH_MX35 || ARCH_MX25 || ARCH_MX5
+		MACH_MX27 || ARCH_MX35 || ARCH_MX25 || ARCH_MX5 || SOC_IMX28
 	select PHYLIB
 	help
 	  Say Y here if you want to use the built-in 10/100 Fast ethernet
 	  controller on some Motorola ColdFire and Freescale i.MX processors.
 
-config FEC2
-	bool "Second FEC ethernet controller (on some ColdFire CPUs)"
-	depends on FEC
-	help
-	  Say Y here if you want to use the second built-in 10/100 Fast
-	  ethernet controller on some Motorola ColdFire processors.
-
 config FEC_MPC52xx
 	tristate "MPC52xx FEC driver"
 	depends on PPC_MPC52xx && PPC_BESTCOMM

drivers/net/bfin_mac.c

View file

diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index ce1e5e9..0b9fc51 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -8,6 +8,11 @@
  * Licensed under the GPL-2 or later.
  */
 
+#define DRV_VERSION	"1.1"
+#define DRV_DESC	"Blackfin on-chip Ethernet MAC driver"
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -41,12 +46,7 @@
 
 #include "bfin_mac.h"
 
-#define DRV_NAME	"bfin_mac"
-#define DRV_VERSION	"1.1"
-#define DRV_AUTHOR	"Bryan Wu, Luke Yang"
-#define DRV_DESC	"Blackfin on-chip Ethernet MAC driver"
-
-MODULE_AUTHOR(DRV_AUTHOR);
+MODULE_AUTHOR("Bryan Wu, Luke Yang");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION(DRV_DESC);
 MODULE_ALIAS("platform:bfin_mac");
@@ -189,8 +189,7 @@ static int desc_list_init(void)
 		/* allocate a new skb for next time receive */
 		new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
 		if (!new_skb) {
-			printk(KERN_NOTICE DRV_NAME
-			       ": init: low on mem - packet dropped\n");
+			pr_notice("init: low on mem - packet dropped\n");
 			goto init_error;
 		}
 		skb_reserve(new_skb, NET_IP_ALIGN);
@@ -240,7 +239,7 @@ static int desc_list_init(void)
 
 init_error:
 	desc_list_free();
-	printk(KERN_ERR DRV_NAME ": kmalloc failed\n");
+	pr_err("kmalloc failed\n");
 	return -ENOMEM;
 }
 
@@ -259,8 +258,7 @@ static int bfin_mdio_poll(void)
 	while ((bfin_read_EMAC_STAADD()) & STABUSY) {
 		udelay(1);
 		if (timeout_cnt-- < 0) {
-			printk(KERN_ERR DRV_NAME
-			": wait MDC/MDIO transaction to complete timeout\n");
+			pr_err("wait MDC/MDIO transaction to complete timeout\n");
 			return -ETIMEDOUT;
 		}
 	}
@@ -350,9 +348,9 @@ static void bfin_mac_adjust_link(struct net_device *dev)
 					opmode &= ~RMII_10;
 					break;
 				default:
-					printk(KERN_WARNING
-						"%s: Ack!  Speed (%d) is not 10/100!\n",
-						DRV_NAME, phydev->speed);
+					netdev_warn(dev,
+						"Ack! Speed (%d) is not 10/100!\n",
+						phydev->speed);
 					break;
 				}
 				bfin_write_EMAC_OPMODE(opmode);
@@ -417,14 +415,13 @@ static int mii_probe(struct net_device *dev, int phy_mode)
 
 	/* now we are supposed to have a proper phydev, to attach to... */
 	if (!phydev) {
-		printk(KERN_INFO "%s: Don't found any phy device at all\n",
-			dev->name);
+		netdev_err(dev, "no phy device found\n");
 		return -ENODEV;
 	}
 
 	if (phy_mode != PHY_INTERFACE_MODE_RMII &&
 		phy_mode != PHY_INTERFACE_MODE_MII) {
-		printk(KERN_INFO "%s: Invalid phy interface mode\n", dev->name);
+		netdev_err(dev, "invalid phy interface mode\n");
 		return -EINVAL;
 	}
 
@@ -432,7 +429,7 @@ static int mii_probe(struct net_device *dev, int phy_mode)
 			0, phy_mode);
 
 	if (IS_ERR(phydev)) {
-		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+		netdev_err(dev, "could not attach PHY\n");
 		return PTR_ERR(phydev);
 	}
 
@@ -453,11 +450,10 @@ static int mii_probe(struct net_device *dev, int phy_mode)
 	lp->old_duplex = -1;
 	lp->phydev = phydev;
 
-	printk(KERN_INFO "%s: attached PHY driver [%s] "
-	       "(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)"
-	       "@sclk=%dMHz)\n",
-	       DRV_NAME, phydev->drv->name, dev_name(&phydev->dev), phydev->irq,
-	       MDC_CLK, mdc_div, sclk/1000000);
+	pr_info("attached PHY driver [%s] "
+	        "(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)@sclk=%dMHz)\n",
+	        phydev->drv->name, dev_name(&phydev->dev), phydev->irq,
+	        MDC_CLK, mdc_div, sclk/1000000);
 
 	return 0;
 }
@@ -502,7 +498,7 @@ bfin_mac_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
 static void bfin_mac_ethtool_getdrvinfo(struct net_device *dev,
 					struct ethtool_drvinfo *info)
 {
-	strcpy(info->driver, DRV_NAME);
+	strcpy(info->driver, KBUILD_MODNAME);
 	strcpy(info->version, DRV_VERSION);
 	strcpy(info->fw_version, "N/A");
 	strcpy(info->bus_info, dev_name(&dev->dev));
@@ -562,7 +558,7 @@ static const struct ethtool_ops bfin_mac_ethtool_ops = {
 };
 
 /**************************************************************************/
-void setup_system_regs(struct net_device *dev)
+static void setup_system_regs(struct net_device *dev)
 {
 	struct bfin_mac_local *lp = netdev_priv(dev);
 	int i;
@@ -592,6 +588,10 @@ void setup_system_regs(struct net_device *dev)
 
 	bfin_write_EMAC_MMC_CTL(RSTC | CROLL);
 
+	/* Set vlan regs to let 1522 bytes long packets pass through */
+	bfin_write_EMAC_VLAN1(lp->vlan1_mask);
+	bfin_write_EMAC_VLAN2(lp->vlan2_mask);
+
 	/* Initialize the TX DMA channel registers */
 	bfin_write_DMA2_X_COUNT(0);
 	bfin_write_DMA2_X_MODIFY(4);
@@ -827,8 +827,7 @@ static void bfin_tx_hwtstamp(struct net_device *netdev, struct sk_buff *skb)
 		while ((!(bfin_read_EMAC_PTP_ISTAT() & TXTL)) && (--timeout_cnt))
 			udelay(1);
 		if (timeout_cnt == 0)
-			printk(KERN_ERR DRV_NAME
-					": fails to timestamp the TX packet\n");
+			netdev_err(netdev, "timestamp the TX packet failed\n");
 		else {
 			struct skb_shared_hwtstamps shhwtstamps;
 			u64 ns;
@@ -1083,8 +1082,7 @@ static void bfin_mac_rx(struct net_device *dev)
 	 * we which case we simply drop the packet
 	 */
 	if (current_rx_ptr->status.status_word & RX_ERROR_MASK) {
-		printk(KERN_NOTICE DRV_NAME
-		       ": rx: receive error - packet dropped\n");
+		netdev_notice(dev, "rx: receive error - packet dropped\n");
 		dev->stats.rx_dropped++;
 		goto out;
 	}
@@ -1094,8 +1092,7 @@ static void bfin_mac_rx(struct net_device *dev)
 
 	new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
 	if (!new_skb) {
-		printk(KERN_NOTICE DRV_NAME
-		       ": rx: low on mem - packet dropped\n");
+		netdev_notice(dev, "rx: low on mem - packet dropped\n");
 		dev->stats.rx_dropped++;
 		goto out;
 	}
@@ -1213,7 +1210,7 @@ static int bfin_mac_enable(struct phy_device *phydev)
 	int ret;
 	u32 opmode;
 
-	pr_debug("%s: %s\n", DRV_NAME, __func__);
+	pr_debug("%s\n", __func__);
 
 	/* Set RX DMA */
 	bfin_write_DMA1_NEXT_DESC_PTR(&(rx_list_head->desc_a));
@@ -1323,7 +1320,7 @@ static void bfin_mac_set_multicast_list(struct net_device *dev)
 	u32 sysctl;
 
 	if (dev->flags & IFF_PROMISC) {
-		printk(KERN_INFO "%s: set to promisc mode\n", dev->name);
+		netdev_info(dev, "set promisc mode\n");
 		sysctl = bfin_read_EMAC_OPMODE();
 		sysctl |= PR;
 		bfin_write_EMAC_OPMODE(sysctl);
@@ -1393,7 +1390,7 @@ static int bfin_mac_open(struct net_device *dev)
 	 * address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx
 	 */
 	if (!is_valid_ether_addr(dev->dev_addr)) {
-		printk(KERN_WARNING DRV_NAME ": no valid ethernet hw addr\n");
+		netdev_warn(dev, "no valid ethernet hw addr\n");
 		return -EINVAL;
 	}
 
@@ -1527,6 +1524,9 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
 		goto out_err_mii_probe;
 	}
 
+	lp->vlan1_mask = ETH_P_8021Q | mii_bus_data->vlan1_mask;
+	lp->vlan2_mask = ETH_P_8021Q | mii_bus_data->vlan2_mask;
+
 	/* Fill in the fields of the device structure with ethernet values. */
 	ether_setup(ndev);
 
@@ -1558,7 +1558,7 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
 	bfin_mac_hwtstamp_init(ndev);
 
 	/* now, print out the card info, in a short format.. */
-	dev_info(&pdev->dev, "%s, Version %s\n", DRV_DESC, DRV_VERSION);
+	netdev_info(ndev, "%s, Version %s\n", DRV_DESC, DRV_VERSION);
 
 	return 0;
 
@@ -1650,7 +1650,7 @@ static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
 	 * so set the GPIO pins to Ethernet mode
 	 */
 	pin_req = mii_bus_pd->mac_peripherals;
-	rc = peripheral_request_list(pin_req, DRV_NAME);
+	rc = peripheral_request_list(pin_req, KBUILD_MODNAME);
 	if (rc) {
 		dev_err(&pdev->dev, "Requesting peripherals failed!\n");
 		return rc;
@@ -1739,7 +1739,7 @@ static struct platform_driver bfin_mac_driver = {
 	.resume = bfin_mac_resume,
 	.suspend = bfin_mac_suspend,
 	.driver = {
-		.name = DRV_NAME,
+		.name = KBUILD_MODNAME,
 		.owner	= THIS_MODULE,
 	},
 };

drivers/net/bfin_mac.h

View file

diff --git a/drivers/net/bfin_mac.h b/drivers/net/bfin_mac.h
index aed68be..f8559ac 100644
--- a/drivers/net/bfin_mac.h
+++ b/drivers/net/bfin_mac.h
@@ -17,7 +17,14 @@
 #include <linux/etherdevice.h>
 #include <linux/bfin_mac.h>
 
+/*
+ * Disable hardware checksum for bug #5600 if writeback cache is
+ * enabled. Otherwize, corrupted RX packet will be sent up stack
+ * without error mark.
+ */
+#ifndef CONFIG_BFIN_EXTMEM_WRITEBACK
 #define BFIN_MAC_CSUM_OFFLOAD
+#endif
 
 #define TX_RECLAIM_JIFFIES (HZ / 5)
 
@@ -68,7 +75,6 @@ struct bfin_mac_local {
 	 */
 	struct net_device_stats stats;
 
-	unsigned char Mac[6];	/* MAC address of the board */
 	spinlock_t lock;
 
 	int wol;		/* Wake On Lan */
@@ -76,6 +82,9 @@ struct bfin_mac_local {
 	struct timer_list tx_reclaim_timer;
 	struct net_device *ndev;
 
+	/* Data for EMAC_VLAN1 regs */
+	u16 vlan1_mask, vlan2_mask;
+
 	/* MII and PHY stuffs */
 	int old_link;          /* used by bf537_adjust_link */
 	int old_speed;

drivers/net/bnx2x/bnx2x.h

View file

diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index 77d6c8d..6a858a2 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -636,6 +636,7 @@ struct bnx2x_common {
 
 #define CHIP_METAL(bp)			(bp->common.chip_id & 0x00000ff0)
 #define CHIP_BOND_ID(bp)		(bp->common.chip_id & 0x0000000f)
+#define CHIP_PARITY_ENABLED(bp)	(CHIP_IS_E1(bp) || CHIP_IS_E1H(bp))
 
 	int			flash_size;
 #define NVRAM_1MB_SIZE			0x20000	/* 1M bit in bytes */

drivers/net/bnx2x/bnx2x_dump.h

View file

diff --git a/drivers/net/bnx2x/bnx2x_dump.h b/drivers/net/bnx2x/bnx2x_dump.h
index dc18c25..fb3ff7c 100644
--- a/drivers/net/bnx2x/bnx2x_dump.h
+++ b/drivers/net/bnx2x/bnx2x_dump.h
@@ -1,10 +1,16 @@
 /* bnx2x_dump.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2009 Broadcom Corporation
+ * Copyright (c) 2011 Broadcom Corporation
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation.
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2, available
+ * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a
+ * license other than the GPL, without Broadcom's express prior written
+ * consent.
  */
 
 
@@ -17,53 +23,53 @@
 #define BNX2X_DUMP_H
 
 
-struct dump_sign {
-	u32 time_stamp;
-	u32 diag_ver;
-	u32 grc_dump_ver;
-};
 
-#define TSTORM_WAITP_ADDR		0x1b8a80
-#define CSTORM_WAITP_ADDR		0x238a80
-#define XSTORM_WAITP_ADDR		0x2b8a80
-#define USTORM_WAITP_ADDR		0x338a80
-#define TSTORM_CAM_MODE			0x1b1440
+/*definitions */
+#define XSTORM_WAITP_ADDR    0x2b8a80
+#define TSTORM_WAITP_ADDR    0x1b8a80
+#define USTORM_WAITP_ADDR    0x338a80
+#define CSTORM_WAITP_ADDR    0x238a80
+#define TSTORM_CAM_MODE         0x1B1440
 
-#define RI_E1				0x1
-#define RI_E1H				0x2
+#define MAX_TIMER_PENDING      200
+#define TIMER_SCAN_DONT_CARE   0xFF
+#define RI_E1			0x1
+#define RI_E1H			0x2
 #define RI_E2			0x4
-#define RI_ONLINE			0x100
+#define RI_ONLINE		0x100
 #define RI_PATH0_DUMP		0x200
 #define RI_PATH1_DUMP		0x400
-#define RI_E1_OFFLINE			(RI_E1)
-#define RI_E1_ONLINE			(RI_E1 | RI_ONLINE)
-#define RI_E1H_OFFLINE			(RI_E1H)
-#define RI_E1H_ONLINE			(RI_E1H | RI_ONLINE)
-#define RI_E2_OFFLINE			(RI_E2)
-#define RI_E2_ONLINE			(RI_E2 | RI_ONLINE)
-#define RI_E1E1H_OFFLINE		(RI_E1 | RI_E1H)
-#define RI_E1E1H_ONLINE			(RI_E1 | RI_E1H | RI_ONLINE)
-#define RI_E1HE2_OFFLINE		(RI_E2 | RI_E1H)
-#define RI_E1HE2_ONLINE			(RI_E2 | RI_E1H | RI_ONLINE)
-#define RI_E1E2_OFFLINE			(RI_E2 | RI_E1)
-#define RI_E1E2_ONLINE			(RI_E2 | RI_E1 | RI_ONLINE)
-#define RI_ALL_OFFLINE			(RI_E1 | RI_E1H | RI_E2)
-#define RI_ALL_ONLINE			(RI_E1 | RI_E1H | RI_E2 | RI_ONLINE)
-
-#define MAX_TIMER_PENDING		200
-#define TIMER_SCAN_DONT_CARE		0xFF
+#define RI_E1_OFFLINE		(RI_E1)
+#define RI_E1_ONLINE		(RI_E1 | RI_ONLINE)
+#define RI_E1H_OFFLINE		(RI_E1H)
+#define RI_E1H_ONLINE		(RI_E1H | RI_ONLINE)
+#define RI_E2_OFFLINE		(RI_E2)
+#define RI_E2_ONLINE		(RI_E2 | RI_ONLINE)
+#define RI_E1E1H_OFFLINE	(RI_E1 | RI_E1H)
+#define RI_E1E1H_ONLINE		(RI_E1 | RI_E1H | RI_ONLINE)
+#define RI_E1HE2_OFFLINE	(RI_E2 | RI_E1H)
+#define RI_E1HE2_ONLINE		(RI_E2 | RI_E1H | RI_ONLINE)
+#define RI_E1E2_OFFLINE		(RI_E2 | RI_E1)
+#define RI_E1E2_ONLINE		(RI_E2 | RI_E1 | RI_ONLINE)
+#define RI_ALL_OFFLINE         (RI_E1 | RI_E1H | RI_E2)
+#define RI_ALL_ONLINE          (RI_E1 | RI_E1H | RI_E2 | RI_ONLINE)
 
+struct dump_sign {
+	u32 time_stamp;
+	u32 diag_ver;
+	u32 grc_dump_ver;
+};
 
 struct dump_hdr {
-	u32		 hdr_size;	/* in dwords, excluding this field */
-	struct dump_sign dump_sign;
-	u32		 xstorm_waitp;
-	u32		 tstorm_waitp;
-	u32		 ustorm_waitp;
-	u32		 cstorm_waitp;
-	u16		 info;
-	u8		 idle_chk;
-	u8		 reserved;
+	u32  hdr_size;	/* in dwords, excluding this field */
+	struct dump_sign	dump_sign;
+	u32  xstorm_waitp;
+	u32  tstorm_waitp;
+	u32  ustorm_waitp;
+	u32  cstorm_waitp;
+	u16  info;
+	u8   idle_chk;
+	u8   reserved;
 };
 
 struct reg_addr {
@@ -80,202 +86,185 @@ struct wreg_addr {
 	u16 info;
 };
 
-
-#define REGS_COUNT			558
+#define REGS_COUNT			834
 static const struct reg_addr reg_addrs[REGS_COUNT] = {
 	{ 0x2000, 341, RI_ALL_ONLINE }, { 0x2800, 103, RI_ALL_ONLINE },
 	{ 0x3000, 287, RI_ALL_ONLINE }, { 0x3800, 331, RI_ALL_ONLINE },
-	{ 0x8800, 6, RI_E1_ONLINE }, { 0xa000, 223, RI_ALL_ONLINE },
-	{ 0xa388, 1, RI_ALL_ONLINE }, { 0xa398, 1, RI_ALL_ONLINE },
-	{ 0xa39c, 7, RI_E1H_ONLINE }, { 0xa3c0, 3, RI_E1H_ONLINE },
-	{ 0xa3d0, 1, RI_E1H_ONLINE }, { 0xa3d8, 1, RI_E1H_ONLINE },
-	{ 0xa3e0, 1, RI_E1H_ONLINE }, { 0xa3e8, 1, RI_E1H_ONLINE },
-	{ 0xa3f0, 1, RI_E1H_ONLINE }, { 0xa3f8, 1, RI_E1H_ONLINE },
-	{ 0xa400, 69, RI_ALL_ONLINE }, { 0xa518, 1, RI_ALL_ONLINE },
-	{ 0xa520, 1, RI_ALL_ONLINE }, { 0xa528, 1, RI_ALL_ONLINE },
-	{ 0xa530, 1, RI_ALL_ONLINE }, { 0xa538, 1, RI_ALL_ONLINE },
-	{ 0xa540, 1, RI_ALL_ONLINE }, { 0xa548, 1, RI_ALL_ONLINE },
-	{ 0xa550, 1, RI_ALL_ONLINE }, { 0xa558, 1, RI_ALL_ONLINE },
-	{ 0xa560, 1, RI_ALL_ONLINE }, { 0xa568, 1, RI_ALL_ONLINE },
-	{ 0xa570, 1, RI_ALL_ONLINE }, { 0xa580, 1, RI_ALL_ONLINE },
-	{ 0xa590, 1, RI_ALL_ONLINE }, { 0xa5a0, 1, RI_ALL_ONLINE },
-	{ 0xa5c0, 1, RI_ALL_ONLINE }, { 0xa5e0, 1, RI_E1H_ONLINE },
-	{ 0xa5e8, 1, RI_E1H_ONLINE }, { 0xa5f0, 1, RI_E1H_ONLINE },
-	{ 0xa5f8, 10, RI_E1H_ONLINE }, { 0x10000, 236, RI_ALL_ONLINE },
-	{ 0x103bc, 1, RI_ALL_ONLINE }, { 0x103cc, 1, RI_ALL_ONLINE },
-	{ 0x103dc, 1, RI_ALL_ONLINE }, { 0x10400, 57, RI_ALL_ONLINE },
-	{ 0x104e8, 2, RI_ALL_ONLINE }, { 0x104f4, 2, RI_ALL_ONLINE },
-	{ 0x10500, 146, RI_ALL_ONLINE }, { 0x10750, 2, RI_ALL_ONLINE },
-	{ 0x10760, 2, RI_ALL_ONLINE }, { 0x10770, 2, RI_ALL_ONLINE },
-	{ 0x10780, 2, RI_ALL_ONLINE }, { 0x10790, 2, RI_ALL_ONLINE },
-	{ 0x107a0, 2, RI_ALL_ONLINE }, { 0x107b0, 2, RI_ALL_ONLINE },
-	{ 0x107c0, 2, RI_ALL_ONLINE }, { 0x107d0, 2, RI_ALL_ONLINE },
-	{ 0x107e0, 2, RI_ALL_ONLINE }, { 0x10880, 2, RI_ALL_ONLINE },
-	{ 0x10900, 2, RI_ALL_ONLINE }, { 0x12000, 1, RI_ALL_ONLINE },
-	{ 0x14000, 1, RI_ALL_ONLINE }, { 0x16000, 26, RI_E1H_ONLINE },
-	{ 0x16070, 18, RI_E1H_ONLINE }, { 0x160c0, 27, RI_E1H_ONLINE },
-	{ 0x16140, 1, RI_E1H_ONLINE }, { 0x16160, 1, RI_E1H_ONLINE },
-	{ 0x16180, 2, RI_E1H_ONLINE }, { 0x161c0, 2, RI_E1H_ONLINE },
-	{ 0x16204, 5, RI_E1H_ONLINE }, { 0x18000, 1, RI_E1H_ONLINE },
-	{ 0x18008, 1, RI_E1H_ONLINE }, { 0x20000, 24, RI_ALL_ONLINE },
-	{ 0x20060, 8, RI_ALL_ONLINE }, { 0x20080, 138, RI_ALL_ONLINE },
-	{ 0x202b4, 1, RI_ALL_ONLINE }, { 0x202c4, 1, RI_ALL_ONLINE },
-	{ 0x20400, 2, RI_ALL_ONLINE }, { 0x2040c, 8, RI_ALL_ONLINE },
-	{ 0x2042c, 18, RI_E1H_ONLINE }, { 0x20480, 1, RI_ALL_ONLINE },
-	{ 0x20500, 1, RI_ALL_ONLINE }, { 0x20600, 1, RI_ALL_ONLINE },
-	{ 0x28000, 1, RI_ALL_ONLINE }, { 0x28004, 8191, RI_ALL_OFFLINE },
-	{ 0x30000, 1, RI_ALL_ONLINE }, { 0x30004, 16383, RI_ALL_OFFLINE },
-	{ 0x40000, 98, RI_ALL_ONLINE }, { 0x40194, 1, RI_ALL_ONLINE },
-	{ 0x401a4, 1, RI_ALL_ONLINE }, { 0x401a8, 11, RI_E1H_ONLINE },
-	{ 0x40200, 4, RI_ALL_ONLINE }, { 0x40400, 43, RI_ALL_ONLINE },
-	{ 0x404b8, 1, RI_ALL_ONLINE }, { 0x404c8, 1, RI_ALL_ONLINE },
-	{ 0x404cc, 3, RI_E1H_ONLINE }, { 0x40500, 2, RI_ALL_ONLINE },
+	{ 0x8800, 6, RI_ALL_ONLINE }, { 0x8818, 1, RI_E1HE2_ONLINE },
+	{ 0x9000, 164, RI_E2_ONLINE }, { 0x9400, 33, RI_E2_ONLINE },
+	{ 0xa000, 27, RI_ALL_ONLINE }, { 0xa06c, 1, RI_E1E1H_ONLINE },
+	{ 0xa070, 71, RI_ALL_ONLINE }, { 0xa18c, 4, RI_E1E1H_ONLINE },
+	{ 0xa19c, 62, RI_ALL_ONLINE }, { 0xa294, 2, RI_E1E1H_ONLINE },
+	{ 0xa29c, 56, RI_ALL_ONLINE }, { 0xa39c, 7, RI_E1HE2_ONLINE },
+	{ 0xa3c0, 3, RI_E1HE2_ONLINE }, { 0xa3d0, 1, RI_E1HE2_ONLINE },
+	{ 0xa3d8, 1, RI_E1HE2_ONLINE }, { 0xa3e0, 1, RI_E1HE2_ONLINE },
+	{ 0xa3e8, 1, RI_E1HE2_ONLINE }, { 0xa3f0, 1, RI_E1HE2_ONLINE },
+	{ 0xa3f8, 1, RI_E1HE2_ONLINE }, { 0xa400, 43, RI_ALL_ONLINE },
+	{ 0xa4ac, 2, RI_E1E1H_ONLINE }, { 0xa4b4, 1, RI_ALL_ONLINE },
+	{ 0xa4b8, 2, RI_E1E1H_ONLINE }, { 0xa4c0, 3, RI_ALL_ONLINE },
+	{ 0xa4cc, 5, RI_E1E1H_ONLINE }, { 0xa4e0, 9, RI_ALL_ONLINE },
+	{ 0xa504, 1, RI_E1E1H_ONLINE }, { 0xa508, 3, RI_ALL_ONLINE },
+	{ 0xa518, 1, RI_ALL_ONLINE }, { 0xa520, 1, RI_ALL_ONLINE },
+	{ 0xa528, 1, RI_ALL_ONLINE }, { 0xa530, 1, RI_ALL_ONLINE },
+	{ 0xa538, 1, RI_ALL_ONLINE }, { 0xa540, 1, RI_ALL_ONLINE },
+	{ 0xa548, 1, RI_E1E1H_ONLINE }, { 0xa550, 1, RI_E1E1H_ONLINE },
+	{ 0xa558, 1, RI_E1E1H_ONLINE }, { 0xa560, 1, RI_E1E1H_ONLINE },
+	{ 0xa568, 1, RI_E1E1H_ONLINE }, { 0xa570, 1, RI_ALL_ONLINE },
+	{ 0xa580, 1, RI_ALL_ONLINE }, { 0xa590, 1, RI_ALL_ONLINE },
+	{ 0xa5a0, 1, RI_ALL_ONLINE }, { 0xa5c0, 1, RI_ALL_ONLINE },
+	{ 0xa5e0, 1, RI_E1HE2_ONLINE }, { 0xa5e8, 1, RI_E1HE2_ONLINE },
+	{ 0xa5f0, 1, RI_E1HE2_ONLINE }, { 0xa5f8, 10, RI_E1HE2_ONLINE },
+	{ 0xa620, 111, RI_E2_ONLINE }, { 0xa800, 51, RI_E2_ONLINE },
+	{ 0xa8d4, 4, RI_E2_ONLINE }, { 0xa8e8, 1, RI_E2_ONLINE },
+	{ 0xa8f0, 1, RI_E2_ONLINE }, { 0x10000, 236, RI_ALL_ONLINE },
+	{ 0x10400, 57, RI_ALL_ONLINE }, { 0x104e8, 2, RI_ALL_ONLINE },
+	{ 0x104f4, 2, RI_ALL_ONLINE }, { 0x10500, 146, RI_ALL_ONLINE },
+	{ 0x10750, 2, RI_ALL_ONLINE }, { 0x10760, 2, RI_ALL_ONLINE },
+	{ 0x10770, 2, RI_ALL_ONLINE }, { 0x10780, 2, RI_ALL_ONLINE },
+	{ 0x10790, 2, RI_ALL_ONLINE }, { 0x107a0, 2, RI_ALL_ONLINE },
+	{ 0x107b0, 2, RI_ALL_ONLINE }, { 0x107c0, 2, RI_ALL_ONLINE },
+	{ 0x107d0, 2, RI_ALL_ONLINE }, { 0x107e0, 2, RI_ALL_ONLINE },
+	{ 0x10880, 2, RI_ALL_ONLINE }, { 0x10900, 2, RI_ALL_ONLINE },
+	{ 0x16000, 26, RI_E1HE2_ONLINE }, { 0x16070, 18, RI_E1HE2_ONLINE },
+	{ 0x160c0, 27, RI_E1HE2_ONLINE }, { 0x16140, 1, RI_E1HE2_ONLINE },
+	{ 0x16160, 1, RI_E1HE2_ONLINE }, { 0x16180, 2, RI_E1HE2_ONLINE },
+	{ 0x161c0, 2, RI_E1HE2_ONLINE }, { 0x16204, 5, RI_E1HE2_ONLINE },
+	{ 0x18000, 1, RI_E1HE2_ONLINE }, { 0x18008, 1, RI_E1HE2_ONLINE },
+	{ 0x18010, 35, RI_E2_ONLINE }, { 0x180a4, 2, RI_E2_ONLINE },
+	{ 0x180c0, 191, RI_E2_ONLINE }, { 0x18440, 1, RI_E2_ONLINE },
+	{ 0x18460, 1, RI_E2_ONLINE }, { 0x18480, 2, RI_E2_ONLINE },
+	{ 0x184c0, 2, RI_E2_ONLINE }, { 0x18500, 15, RI_E2_ONLINE },
+	{ 0x20000, 24, RI_ALL_ONLINE }, { 0x20060, 8, RI_ALL_ONLINE },
+	{ 0x20080, 94, RI_ALL_ONLINE }, { 0x201f8, 1, RI_E1E1H_ONLINE },
+	{ 0x201fc, 1, RI_ALL_ONLINE }, { 0x20200, 1, RI_E1E1H_ONLINE },
+	{ 0x20204, 1, RI_ALL_ONLINE }, { 0x20208, 1, RI_E1E1H_ONLINE },
+	{ 0x2020c, 39, RI_ALL_ONLINE }, { 0x202c8, 1, RI_E2_ONLINE },
+	{ 0x202d8, 4, RI_E2_ONLINE }, { 0x20400, 2, RI_ALL_ONLINE },