projects/linux·commit 456febd2

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

456febd2 · Linus Torvalds <[email protected]> · 2014-06-25 12:19:01 -07:00

Pull ARM SoC fixes from Arnd Bergmann:
 "A new set of bug fixes for 3.16, containing patches for seven
  platforms:

  at91:
    - drivers/misc fix for Kconfig PWM symbol
    - correction of several values in DT after conversion to CCF
    - fix at91sam9261/at91sam9261ek mistake in slow crystal vs. slow RC osc

  imx:
    - Use GPIO for card CD/WP on imx51-babbage and eukrea-mbimxsd51,
      because controller base CD/WP is not working in esdhc driver due to
      runtime PM support
    - A couple of random ventana gw5xxx board fixes
    - Add IMX_IPUV3_CORE back to defconfig, which gets lost when moving
      IPUv3 driver out of staging tree
    - Fix enet/fec clock selection on imx6sl
    - Fix display node on imx53-m53evk board
    - A couple of Cubox-i updates from Russell, which were omitted from
      the merge window due to dependency

  integrator:
    - fix an OF-related regression against 3.15

  mvebu:
    - mvebu (v7)
       - Fix broken SoC ID detection
       - Select ARM_CPU_SUSPEND for v7
       - Remove armada38x compatible string (no users yet)
       - Enable Dove SoC in mvebu_v7_defconfig
    - kirkwood
       - Fix phy-connection-type on GuruPlug board

  qcom:
    - enable gsbi driver in defconfig
    - fix section mismatch warning in serial driver

  samsung:
    - use WFI macro in platform_do_lowpower because exynos cpuhotplug
      includes a hardcoded WFI instruction and it causes compile error
      in Thumb-2 mode.
    - fix GIC reg sizes for exynos4 SoCs
    - remove reset timer counter value during boot and resume for mct
      to fix a big jump in printk timestamps
    - fix pm code to check cortex-A9 for another exynos SoCs
    - don't rely on firmware's secondary_cpu_start for mcpm

  sti:
    - Ethernet clocks were wrongly defined for STiH415/416 platforms
    - STiH416 B2020 revision E DTS file name contained uppercase, change to
      lowercase"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits)
  ARM: at91/dt: sam9261: remove slow RC osc
  ARM: at91/dt: define sam9261ek slow crystal frequency
  ARM: at91/dt: sam9261: correctly define mainck
  ARM: at91/dt: sam9n12: correct PLLA ICPLL and OUT values
  ARM: at91/dt: sam9x5: correct PLLA ICPLL and OUT values
  misc: atmel_pwm: fix Kconfig symbols
  ARM: integrator: fix OF-related regression
  ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard
  ARM: dts: kirkwood: fix phy-connection-type for Guruplug
  ARM: EXYNOS: Don't rely on firmware's secondary_cpu_start for mcpm
  ARM: dts: imx51-eukrea-mbimxsd51-baseboard: unbreak esdhc.
  ARM: dts: imx51-babbage: Fix esdhc setup
  ARM: dts: mx5: Move the display out of soc {} node
  ARM: dts: mx5: Fix IPU port node placement
  ARM: mvebu: select ARM_CPU_SUSPEND for Marvell EBU v7 platforms
  ARM: mvebu: Fix broken SoC ID detection
  ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX_IPUV3_CORE
  ARM: multi_v7_defconfig: Add QCOM GSBI driver
  ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts
  tty: serial: msm: Fix section mismatch warning
  ...
Commit
456febd299999d268342edf3ad4130075f0fe680
Parents
15e52d9a · 6c9d1617

Merge commit. Changes below are compared with the first parent: 15e52d9a.

Changes

43 files changed · +158 −147

FileStatusAddDelContent
Documentation/devicetree/bindings/arm/armada-38x.txtmodified+12−2View file
arch/arm/boot/dts/Makefilemodified+1−1View file
arch/arm/boot/dts/armada-380.dtsimodified+1−1View file
arch/arm/boot/dts/armada-385-db.dtsmodified+1−1View file
arch/arm/boot/dts/armada-385-rd.dtsmodified+1−1View file
arch/arm/boot/dts/armada-385.dtsimodified+1−1View file
arch/arm/boot/dts/armada-38x.dtsimodified+1−1View file
arch/arm/boot/dts/at91sam9261.dtsimodified+7−14View file
arch/arm/boot/dts/at91sam9261ek.dtsmodified+4−0View file
arch/arm/boot/dts/at91sam9n12.dtsimodified+2−2View file
arch/arm/boot/dts/at91sam9x5.dtsimodified+2−2View file
arch/arm/boot/dts/exynos4.dtsimodified+1−1View file
arch/arm/boot/dts/imx51-babbage.dtsmodified+5−5View file
arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dtsmodified+2−2View file
arch/arm/boot/dts/imx53-m53evk.dtsmodified+19−21View file
arch/arm/boot/dts/imx6dl-hummingboard.dtsmodified+10−0View file
arch/arm/boot/dts/imx6q-gw51xx.dtsmodified+1−1View file
arch/arm/boot/dts/imx6qdl-cubox-i.dtsimodified+27−0View file
arch/arm/boot/dts/imx6qdl-gw51xx.dtsimodified+1−1View file
arch/arm/boot/dts/imx6qdl-gw52xx.dtsimodified+2−2View file
arch/arm/boot/dts/imx6qdl-gw53xx.dtsimodified+1−1View file
arch/arm/boot/dts/imx6qdl-microsom.dtsimodified+0−13View file
arch/arm/boot/dts/imx6sl.dtsimodified+1−1View file
arch/arm/boot/dts/kirkwood-guruplug-server-plus.dtsmodified+2−2View file
arch/arm/boot/dts/stih415.dtsimodified+4−4View file
arch/arm/boot/dts/stih416-b2020-revE.dts → arch/arm/boot/dts/stih416-b2020e.dtsrenamed+0−0View file
arch/arm/boot/dts/stih416.dtsimodified+4−4View file
arch/arm/configs/imx_v6_v7_defconfigmodified+1−0View file
arch/arm/configs/multi_v7_defconfigmodified+1−0View file
arch/arm/configs/mvebu_v7_defconfigmodified+2−0View file
arch/arm/mach-exynos/hotplug.cmodified+1−7View file
arch/arm/mach-exynos/mcpm-exynos.cmodified+6−5View file
arch/arm/mach-exynos/pm.cmodified+9−6View file
arch/arm/mach-imx/clk-imx6sl.cmodified+1−0View file
arch/arm/mach-integrator/integrator_ap.cmodified+7−19View file
arch/arm/mach-integrator/integrator_cp.cmodified+6−17View file
arch/arm/mach-mvebu/Kconfigmodified+2−0View file
drivers/clocksource/exynos_mct.cmodified+3−6View file
drivers/misc/Kconfigmodified+1−1View file
drivers/tty/serial/msm_serial.cmodified+1−1View file
include/dt-bindings/clock/imx6sl-clock.hmodified+2−1View file
include/dt-bindings/clock/stih415-clks.hmodified+1−0View file
include/dt-bindings/clock/stih416-clks.hmodified+1−0View file

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/devicetree/bindings/arm/armada-38x.txt

View file
diff --git a/Documentation/devicetree/bindings/arm/armada-38x.txt b/Documentation/devicetree/bindings/arm/armada-38x.txt
index 11f2330..ad9f8ed 100644
--- a/Documentation/devicetree/bindings/arm/armada-38x.txt
+++ b/Documentation/devicetree/bindings/arm/armada-38x.txt
@@ -6,5 +6,15 @@ following property:
Required root node property:
- - compatible: must contain either "marvell,armada380" or
- "marvell,armada385" depending on the variant of the SoC being used.
+ - compatible: must contain "marvell,armada380"
+
+In addition, boards using the Marvell Armada 385 SoC shall have the
+following property before the previous one:
+
+Required root node property:
+
+compatible: must contain "marvell,armada385"
+
+Example:
+
+compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";

arch/arm/boot/dts/Makefile

View file
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5986ff6..adb5ed9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -357,7 +357,7 @@ dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \
stih415-b2020.dtb \
stih416-b2000.dtb \
stih416-b2020.dtb \
- stih416-b2020-revE.dtb
+ stih416-b2020e.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-cubieboard.dtb \

arch/arm/boot/dts/armada-380.dtsi

View file
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
index e69bc67..4173a8a 100644
--- a/arch/arm/boot/dts/armada-380.dtsi
+++ b/arch/arm/boot/dts/armada-380.dtsi
@@ -16,7 +16,7 @@
/ {
model = "Marvell Armada 380 family SoC";
- compatible = "marvell,armada380", "marvell,armada38x";
+ compatible = "marvell,armada380";
cpus {
#address-cells = <1>;

arch/arm/boot/dts/armada-385-db.dts

View file
diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts
index 5bae473..1af886f 100644
--- a/arch/arm/boot/dts/armada-385-db.dts
+++ b/arch/arm/boot/dts/armada-385-db.dts
@@ -16,7 +16,7 @@
/ {
model = "Marvell Armada 385 Development Board";
- compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada38x";
+ compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada380";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";

arch/arm/boot/dts/armada-385-rd.dts

View file
diff --git a/arch/arm/boot/dts/armada-385-rd.dts b/arch/arm/boot/dts/armada-385-rd.dts
index 4089325..aaca286 100644
--- a/arch/arm/boot/dts/armada-385-rd.dts
+++ b/arch/arm/boot/dts/armada-385-rd.dts
@@ -17,7 +17,7 @@
/ {
model = "Marvell Armada 385 Reference Design";
- compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada38x";
+ compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";

arch/arm/boot/dts/armada-385.dtsi

View file
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
index f011009..6283d79 100644
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ b/arch/arm/boot/dts/armada-385.dtsi
@@ -16,7 +16,7 @@
/ {
model = "Marvell Armada 385 family SoC";
- compatible = "marvell,armada385", "marvell,armada38x";
+ compatible = "marvell,armada385", "marvell,armada380";
cpus {
#address-cells = <1>;

arch/arm/boot/dts/armada-38x.dtsi

View file
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 3de364e..689fa1a 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -20,7 +20,7 @@
/ {
model = "Marvell Armada 38x family SoC";
- compatible = "marvell,armada38x";
+ compatible = "marvell,armada380";
aliases {
gpio0 = &gpio0;

arch/arm/boot/dts/at91sam9261.dtsi

View file
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index b309c1c..04927db 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -568,24 +568,17 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- slow_rc_osc: slow_rc_osc {
- compatible = "fixed-clock";
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
#clock-cells = <0>;
- clock-frequency = <32768>;
- clock-accuracy = <50000000>;
- };
-
- clk32k: slck {
- compatible = "atmel,at91sam9260-clk-slow";
- #clock-cells = <0>;
- clocks = <&slow_rc_osc &slow_xtal>;
+ interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+ clocks = <&main_xtal>;
};
main: mainck {
compatible = "atmel,at91rm9200-clk-main";
#clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MOSCS>;
- clocks = <&main_xtal>;
+ clocks = <&main_osc>;
};
plla: pllack {
@@ -615,7 +608,7 @@
compatible = "atmel,at91rm9200-clk-master";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
- clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
+ clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
atmel,clk-output-range = <0 94000000>;
atmel,clk-divisors = <1 2 4 0>;
};
@@ -632,7 +625,7 @@
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&pmc>;
- clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
+ clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
prog0: prog0 {
#clock-cells = <0>;

arch/arm/boot/dts/at91sam9261ek.dts

View file
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index c6683ea..aa35a7a 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -20,6 +20,10 @@
reg = <0x20000000 0x4000000>;
};
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
main_xtal {
clock-frequency = <18432000>;
};

arch/arm/boot/dts/at91sam9n12.dtsi

View file
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index d1b82e6..2877959 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -132,8 +132,8 @@
<595000000 650000000 3 0>,
<545000000 600000000 0 1>,
<495000000 555000000 1 1>,
- <445000000 500000000 1 2>,
- <400000000 450000000 1 3>;
+ <445000000 500000000 2 1>,
+ <400000000 450000000 3 1>;
};
plladiv: plladivck {

arch/arm/boot/dts/at91sam9x5.dtsi

View file
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 1a57298..d6133f4 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -140,8 +140,8 @@
595000000 650000000 3 0
545000000 600000000 0 1
495000000 555000000 1 1
- 445000000 500000000 1 2
- 400000000 450000000 1 3>;
+ 445000000 500000000 2 1
+ 400000000 450000000 3 1>;
};
plladiv: plladivck {

arch/arm/boot/dts/exynos4.dtsi

View file
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index b8ece4b..fbaf426 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -113,7 +113,7 @@
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
- reg = <0x10490000 0x1000>, <0x10480000 0x100>;
+ reg = <0x10490000 0x10000>, <0x10480000 0x10000>;
};
combiner: interrupt-controller@10440000 {

arch/arm/boot/dts/imx51-babbage.dts

View file
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 6bc3243..181d77f 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -315,15 +315,15 @@
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
- fsl,cd-controller;
- fsl,wp-controller;
+ cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&esdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc2>;
- cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -468,8 +468,8 @@
MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
- MX51_PAD_GPIO1_0__SD1_CD 0x20d5
- MX51_PAD_GPIO1_1__SD1_WP 0x20d5
+ MX51_PAD_GPIO1_0__GPIO1_0 0x100
+ MX51_PAD_GPIO1_1__GPIO1_1 0x100
>;
};

arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts

View file
diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
index 75e66c9..31cfb7f 100644
--- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
+++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -107,7 +107,7 @@
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
- fsl,cd-controller;
+ cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
status = "okay";
};
@@ -206,7 +206,7 @@
pinctrl_esdhc1_cd: esdhc1_cd {
fsl,pins = <
- MX51_PAD_GPIO1_0__SD1_CD 0x20d5
+ MX51_PAD_GPIO1_0__GPIO1_0 0xd5
>;
};

arch/arm/boot/dts/imx53-m53evk.dts

View file
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index d5d146a..c4956b0 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -21,27 +21,25 @@
<0xb0000000 0x20000000>;
};
- soc {
- display1: display@di1 {
- compatible = "fsl,imx-parallel-display";
- interface-pix-fmt = "bgr666";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp1>;
-
- display-timings {
- 800x480p60 {
- native-mode;
- clock-frequency = <31500000>;
- hactive = <800>;
- vactive = <480>;
- hfront-porch = <40>;
- hback-porch = <88>;
- hsync-len = <128>;
- vback-porch = <33>;
- vfront-porch = <9>;
- vsync-len = <3>;
- vsync-active = <1>;
- };
+ display1: display@di1 {
+ compatible = "fsl,imx-parallel-display";
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu_disp1>;
+
+ display-timings {
+ 800x480p60 {
+ native-mode;
+ clock-frequency = <31500000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <40>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ vback-porch = <33>;
+ vfront-porch = <9>;
+ vsync-len = <3>;
+ vsync-active = <1>;
};
};

arch/arm/boot/dts/imx6dl-hummingboard.dts

View file
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts
index 5373a5f..c8e51dd 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard.dts
+++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts
@@ -143,6 +143,14 @@
fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
};
+ pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id {
+ /*
+ * Similar to pinctrl_usbotg_2, but we want it
+ * pulled down for a fixed host connection.
+ */
+ fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+ };
+
pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus {
fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
};
@@ -178,6 +186,8 @@
};
&usbotg {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
vbus-supply = <&reg_usbotg_vbus>;
status = "okay";
};

arch/arm/boot/dts/imx6q-gw51xx.dts

View file
diff --git a/arch/arm/boot/dts/imx6q-gw51xx.dts b/arch/arm/boot/dts/imx6q-gw51xx.dts
index af4929a..0e1406e 100644
--- a/arch/arm/boot/dts/imx6q-gw51xx.dts
+++ b/arch/arm/boot/dts/imx6q-gw51xx.dts
@@ -11,7 +11,7 @@
/dts-v1/;
#include "imx6q.dtsi"
-#include "imx6qdl-gw54xx.dtsi"
+#include "imx6qdl-gw51xx.dtsi"
/ {
model = "Gateworks Ventana i.MX6 Quad GW51XX";

arch/arm/boot/dts/imx6qdl-cubox-i.dtsi

View file
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index 25da82a..e8e7816 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -12,6 +12,19 @@
pinctrl-0 = <&pinctrl_cubox_i_ir>;
};
+ pwmleds {
+ compatible = "pwm-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
+
+ front {
+ active-low;
+ label = "imx6:red:front";
+ max-brightness = <248>;
+ pwms = <&pwm1 0 50000>;
+ };
+ };
+
regulators {
compatible = "simple-bus";
@@ -109,6 +122,10 @@
>;
};
+ pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led {
+ fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>;
+ };
+
pinctrl_cubox_i_spdif: cubox-i-spdif {
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
};
@@ -117,6 +134,14 @@
fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
};
+ pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id {
+ /*
+ * The Cubox-i pulls this low, but as it's pointless
+ * leaving it as a pull-up, even if it is just 10uA.
+ */
+ fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+ };
+
pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>;
};
@@ -153,6 +178,8 @@
};
&usbotg {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>;
vbus-supply = <&reg_usbotg_vbus>;
status = "okay";
};

arch/arm/boot/dts/imx6qdl-gw51xx.dtsi

View file
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 31665ad..0db15af 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -161,7 +161,7 @@
status = "okay";
pmic: ltc3676@3c {
- compatible = "ltc,ltc3676";
+ compatible = "lltc,ltc3676";
reg = <0x3c>;
regulators {

arch/arm/boot/dts/imx6qdl-gw52xx.dtsi

View file
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 367af3e..744c8a2 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -220,7 +220,7 @@
};
pmic: ltc3676@3c {
- compatible = "ltc,ltc3676";
+ compatible = "lltc,ltc3676";
reg = <0x3c>;
regulators {
@@ -288,7 +288,7 @@
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- clocks = <&clks 169>;
+ clocks = <&clks 201>;
VDDA-supply = <&reg_1p8v>;
VDDIO-supply = <&reg_3p3v>;
};

arch/arm/boot/dts/imx6qdl-gw53xx.dtsi

View file
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index c91b5a6..adf150c 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -234,7 +234,7 @@
};
pmic: ltc3676@3c {
- compatible = "ltc,ltc3676";
+ compatible = "lltc,ltc3676";
reg = <0x3c>;
regulators {

arch/arm/boot/dts/imx6qdl-microsom.dtsi

View file
diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi
index d729d0b..79eac68 100644
--- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi
@@ -10,14 +10,6 @@
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
>;
};
-
- pinctrl_microsom_usbotg: microsom-usbotg {
- /*
- * Similar to pinctrl_usbotg_2, but we want it
- * pulled down for a fixed host connection.
- */
- fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
- };
};
};
@@ -26,8 +18,3 @@
pinctrl-0 = <&pinctrl_microsom_uart1>;
status = "okay";
};
-
-&usbotg {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_microsom_usbotg>;
-};

arch/arm/boot/dts/imx6sl.dtsi

View file
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 2d4e528..57d4abe 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -686,7 +686,7 @@
compatible = "fsl,imx6sl-fec", "fsl,imx25-fec";
reg = <0x02188000 0x4000>;
interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SL_CLK_ENET_REF>,
+ clocks = <&clks IMX6SL_CLK_ENET>,
<&clks IMX6SL_CLK_ENET_REF>;
clock-names = "ipg", "ahb";
status = "disabled";

arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts

View file
diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
index c5a1fc7..b2d9834 100644
--- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
+++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
@@ -105,7 +105,6 @@
compatible = "ethernet-phy-id0141.0cb0",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
- phy-connection-type = "rgmii-id";
};
ethphy1: ethernet-phy@1 {
@@ -113,7 +112,6 @@
compatible = "ethernet-phy-id0141.0cb0",
"ethernet-phy-ieee802.3-c22";
reg = <1>;
- phy-connection-type = "rgmii-id";
};
};
@@ -121,6 +119,7 @@
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
+ phy-connection-type = "rgmii-id";
};
};
@@ -128,5 +127,6 @@
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
+ phy-connection-type = "rgmii-id";
};
};

arch/arm/boot/dts/stih415.dtsi

View file
diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi
index d6f254f..a0f6f75 100644
--- a/arch/arm/boot/dts/stih415.dtsi
+++ b/arch/arm/boot/dts/stih415.dtsi
@@ -169,8 +169,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mii0>;
- clock-names = "stmmaceth";
- clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>;
+ clock-names = "stmmaceth", "sti-ethclk";
+ clocks = <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>;
};
ethernet1: dwmac@fef08000 {
@@ -192,8 +192,8 @@
reset-names = "stmmaceth";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mii1>;
- clock-names = "stmmaceth";
- clocks = <&clk_s_a0_ls CLK_ETH1_PHY>;
+ clock-names = "stmmaceth", "sti-ethclk";
+ clocks = <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>;
};
rc: rc@fe518000 {

arch/arm/boot/dts/stih416-b2020e.dts

View file
diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020e.dts
similarity index 100%
rename from arch/arm/boot/dts/stih416-b2020-revE.dts
rename to arch/arm/boot/dts/stih416-b2020e.dts

arch/arm/boot/dts/stih416.dtsi

View file
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index 06473c5..84758d7 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -175,8 +175,8 @@
reset-names = "stmmaceth";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mii0>;
- clock-names = "stmmaceth";
- clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>;
+ clock-names = "stmmaceth", "sti-ethclk";
+ clocks = <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>;
};
ethernet1: dwmac@fef08000 {
@@ -197,8 +197,8 @@
reset-names = "stmmaceth";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mii1>;
- clock-names = "stmmaceth";
- clocks = <&clk_s_a0_ls CLK_ETH1_PHY>;
+ clock-names = "stmmaceth", "sti-ethclk";
+ clocks = <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>;
};
rc: rc@fe518000 {

arch/arm/configs/imx_v6_v7_defconfig

View file
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index ef88153..59b7e45 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig

This diff is incomplete. Download the complete patch.

arch/arm/configs/multi_v7_defconfig

View file

This diff is incomplete. Download the complete patch.

arch/arm/configs/mvebu_v7_defconfig

View file

This diff is incomplete. Download the complete patch.

arch/arm/mach-exynos/hotplug.c

View file

This diff is incomplete. Download the complete patch.

arch/arm/mach-exynos/mcpm-exynos.c

View file

This diff is incomplete. Download the complete patch.

arch/arm/mach-exynos/pm.c

View file

This diff is incomplete. Download the complete patch.

arch/arm/mach-imx/clk-imx6sl.c

View file

This diff is incomplete. Download the complete patch.

arch/arm/mach-integrator/integrator_ap.c

View file

This diff is incomplete. Download the complete patch.

arch/arm/mach-integrator/integrator_cp.c

View file

This diff is incomplete. Download the complete patch.

arch/arm/mach-mvebu/Kconfig

View file

This diff is incomplete. Download the complete patch.

drivers/clocksource/exynos_mct.c

View file

This diff is incomplete. Download the complete patch.

drivers/misc/Kconfig

View file

This diff is incomplete. Download the complete patch.

drivers/tty/serial/msm_serial.c

View file

This diff is incomplete. Download the complete patch.

include/dt-bindings/clock/imx6sl-clock.h

View file

This diff is incomplete. Download the complete patch.

include/dt-bindings/clock/stih415-clks.h

View file

This diff is incomplete. Download the complete patch.

include/dt-bindings/clock/stih416-clks.h

View file

This diff is incomplete. Download the complete patch.