Merge tag 'hwmon-for-linus-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Merge commit. Changes below are compared with the first parent: 0fc7e746.
Changes
26 files changed · +1408 −382
Only the first 600 diff lines are shown. Download the complete patch.
Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
View filediff --git a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
index 367c820..3ac0298 100644
--- a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
+++ b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
@@ -22,8 +22,9 @@ Required properties for pwm-tacho node:
- compatible : should be "aspeed,ast2400-pwm-tacho" for AST2400 and
"aspeed,ast2500-pwm-tacho" for AST2500.
-- clocks : a fixed clock providing input clock frequency(PWM
- and Fan Tach clock)
+- clocks : phandle to clock provider with the clock number in the second cell
+
+- resets : phandle to reset controller with the reset number in the second cell
fan subnode format:
===================
@@ -48,19 +49,14 @@ Required properties for each child node:
Examples:
-pwm_tacho_fixed_clk: fixedclk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
-};
-
pwm_tacho: pwmtachocontroller@1e786000 {
#address-cells = <1>;
#size-cells = <1>;
#cooling-cells = <2>;
reg = <0x1E786000 0x1000>;
compatible = "aspeed,ast2500-pwm-tacho";
- clocks = <&pwm_tacho_fixed_clk>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_PWM>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
Documentation/hwmon/lm25066
View filediff --git a/Documentation/hwmon/lm25066 b/Documentation/hwmon/lm25066
index 3fa6bf8..51b32aa 100644
--- a/Documentation/hwmon/lm25066
+++ b/Documentation/hwmon/lm25066
@@ -8,11 +8,6 @@ Supported chips:
Datasheets:
http://www.ti.com/lit/gpn/lm25056
http://www.ti.com/lit/gpn/lm25056a
- * TI LM25063
- Prefix: 'lm25063'
- Addresses scanned: -
- Datasheet:
- To be announced
* National Semiconductor LM25066
Prefix: 'lm25066'
Addresses scanned: -
@@ -42,7 +37,7 @@ Description
-----------
This driver supports hardware monitoring for National Semiconductor / TI LM25056,
-LM25063, LM25066, LM5064, and LM5066/LM5066I Power Management, Monitoring,
+LM25066, LM5064, and LM5066/LM5066I Power Management, Monitoring,
Control, and Protection ICs.
The driver is a client driver to the core PMBus driver. Please see
@@ -74,12 +69,8 @@ in1_input Measured input voltage.
in1_average Average measured input voltage.
in1_min Minimum input voltage.
in1_max Maximum input voltage.
-in1_crit Critical high input voltage (LM25063 only).
-in1_lcrit Critical low input voltage (LM25063 only).
in1_min_alarm Input voltage low alarm.
in1_max_alarm Input voltage high alarm.
-in1_lcrit_alarm Input voltage critical low alarm (LM25063 only).
-in1_crit_alarm Input voltage critical high alarm. (LM25063 only).
in2_label "vmon"
in2_input Measured voltage on VAUX pin
@@ -94,16 +85,12 @@ in3_input Measured output voltage.
in3_average Average measured output voltage.
in3_min Minimum output voltage.
in3_min_alarm Output voltage low alarm.
-in3_highest Historical minimum output voltage (LM25063 only).
-in3_lowest Historical maximum output voltage (LM25063 only).
curr1_label "iin"
curr1_input Measured input current.
curr1_average Average measured input current.
curr1_max Maximum input current.
-curr1_crit Critical input current (LM25063 only).
curr1_max_alarm Input current high alarm.
-curr1_crit_alarm Input current critical high alarm (LM25063 only).
power1_label "pin"
power1_input Measured input power.
@@ -113,11 +100,6 @@ power1_alarm Input power alarm
power1_input_highest Historical maximum power.
power1_reset_history Write any value to reset maximum power history.
-power2_label "pout". LM25063 only.
-power2_input Measured output power.
-power2_max Maximum output power limit.
-power2_crit Critical output power limit.
-
temp1_input Measured temperature.
temp1_max Maximum temperature.
temp1_crit Critical high temperature.
Documentation/hwmon/max31785
View filediff --git a/Documentation/hwmon/max31785 b/Documentation/hwmon/max31785
index 45fb609..270c5f8 100644
--- a/Documentation/hwmon/max31785
+++ b/Documentation/hwmon/max31785
@@ -17,8 +17,9 @@ management with temperature and remote voltage sensing. Various fan control
features are provided, including PWM frequency control, temperature hysteresis,
dual tachometer measurements, and fan health monitoring.
-For dual rotor fan configuration, the MAX31785 exposes the slowest rotor of the
-two in the fan[1-4]_input attributes.
+For dual-rotor configurations the MAX31785A exposes the second rotor tachometer
+readings in attributes fan[5-8]_input. By contrast the MAX31785 only exposes
+the slowest rotor measurement, and does so in the fan[1-4]_input attributes.
Usage Notes
-----------
@@ -31,7 +32,9 @@ Sysfs attributes
fan[1-4]_alarm Fan alarm.
fan[1-4]_fault Fan fault.
-fan[1-4]_input Fan RPM.
+fan[1-8]_input Fan RPM. On the MAX31785A, inputs 5-8 correspond to the
+ second rotor of fans 1-4
+fan[1-4]_target Fan input target
in[1-6]_crit Critical maximum output voltage
in[1-6]_crit_alarm Output voltage critical high alarm
@@ -44,6 +47,12 @@ in[1-6]_max_alarm Output voltage high alarm
in[1-6]_min Minimum output voltage
in[1-6]_min_alarm Output voltage low alarm
+pwm[1-4] Fan target duty cycle (0..255)
+pwm[1-4]_enable 0: Full-speed
+ 1: Manual PWM control
+ 2: Automatic PWM (tach-feedback RPM fan-control)
+ 3: Automatic closed-loop (temp-feedback fan-control)
+
temp[1-11]_crit Critical high temperature
temp[1-11]_crit_alarm Chip temperature critical high alarm
temp[1-11]_input Measured temperature
Documentation/hwmon/w83773g
View filediff --git a/Documentation/hwmon/w83773g b/Documentation/hwmon/w83773g
new file mode 100644
index 0000000..4cc6c0b
--- /dev/null
+++ b/Documentation/hwmon/w83773g
@@ -0,0 +1,33 @@
+Kernel driver w83773g
+====================
+
+Supported chips:
+ * Nuvoton W83773G
+ Prefix: 'w83773g'
+ Addresses scanned: I2C 0x4c and 0x4d
+ Datasheet: https://www.nuvoton.com/resource-files/W83773G_SG_DatasheetV1_2.pdf
+
+Authors:
+ Lei YU <[email protected]>
+
+Description
+-----------
+
+This driver implements support for Nuvoton W83773G temperature sensor
+chip. This chip implements one local and two remote sensors.
+The chip also features offsets for the two remote sensors which get added to
+the input readings. The chip does all the scaling by itself and the driver
+therefore reports true temperatures that don't need any user-space adjustments.
+Temperature is measured in degrees Celsius.
+The chip is wired over I2C/SMBus and specified over a temperature
+range of -40 to +125 degrees Celsius (for local sensor) and -40 to +127
+degrees Celsius (for remote sensors).
+Resolution for both the local and remote channels is 0.125 degree C.
+
+The chip supports only temperature measurement. The driver exports
+the temperature values via the following sysfs files:
+
+temp[1-3]_input
+temp[2-3]_fault
+temp[2-3]_offset
+update_interval
drivers/hwmon/Kconfig
View filediff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 7ad0176..ef23553 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -26,11 +26,9 @@ if HWMON
config HWMON_VID
tristate
- default n
config HWMON_DEBUG_CHIP
bool "Hardware Monitoring Chip debugging messages"
- default n
help
Say Y here if you want the I2C chip drivers to produce a bunch of
debug messages to the system log. Select this if you are having
@@ -42,7 +40,6 @@ comment "Native drivers"
config SENSORS_AB8500
tristate "AB8500 thermal monitoring"
depends on AB8500_GPADC && AB8500_BM
- default n
help
If you say yes here you get support for the thermal sensor part
of the AB8500 chip. The driver includes thermal management for
@@ -302,7 +299,6 @@ config SENSORS_APPLESMC
select NEW_LEDS
select LEDS_CLASS
select INPUT_POLLDEV
- default n
help
This driver provides support for the Apple System Management
Controller, which provides an accelerometer (Apple Sudden Motion
@@ -678,7 +674,6 @@ config SENSORS_JC42
config SENSORS_POWR1220
tristate "Lattice POWR1220 Power Monitoring"
depends on I2C
- default n
help
If you say yes here you get access to the hardware monitoring
functions of the Lattice POWR1220 isp Power Supply Monitoring,
@@ -702,7 +697,6 @@ config SENSORS_LTC2945
tristate "Linear Technology LTC2945"
depends on I2C
select REGMAP_I2C
- default n
help
If you say yes here you get support for Linear Technology LTC2945
I2C System Monitor.
@@ -727,7 +721,6 @@ config SENSORS_LTC2990
config SENSORS_LTC4151
tristate "Linear Technology LTC4151"
depends on I2C
- default n
help
If you say yes here you get support for Linear Technology LTC4151
High Voltage I2C Current and Voltage Monitor interface.
@@ -738,7 +731,6 @@ config SENSORS_LTC4151
config SENSORS_LTC4215
tristate "Linear Technology LTC4215"
depends on I2C
- default n
help
If you say yes here you get support for Linear Technology LTC4215
Hot Swap Controller I2C interface.
@@ -750,7 +742,6 @@ config SENSORS_LTC4222
tristate "Linear Technology LTC4222"
depends on I2C
select REGMAP_I2C
- default n
help
If you say yes here you get support for Linear Technology LTC4222
Dual Hot Swap Controller I2C interface.
@@ -761,7 +752,6 @@ config SENSORS_LTC4222
config SENSORS_LTC4245
tristate "Linear Technology LTC4245"
depends on I2C
- default n
help
If you say yes here you get support for Linear Technology LTC4245
Multiple Supply Hot Swap Controller I2C interface.
@@ -773,7 +763,6 @@ config SENSORS_LTC4260
tristate "Linear Technology LTC4260"
depends on I2C
select REGMAP_I2C
- default n
help
If you say yes here you get support for Linear Technology LTC4260
Positive Voltage Hot Swap Controller I2C interface.
@@ -784,7 +773,6 @@ config SENSORS_LTC4260
config SENSORS_LTC4261
tristate "Linear Technology LTC4261"
depends on I2C
- default n
help
If you say yes here you get support for Linear Technology LTC4261
Negative Voltage Hot Swap Controller I2C interface.
@@ -1276,7 +1264,6 @@ config SENSORS_NSA320
config SENSORS_PCF8591
tristate "Philips PCF8591 ADC/DAC"
depends on I2C
- default n
help
If you say yes here you get support for Philips PCF8591 4-channel
ADC, 1-channel DAC chips.
@@ -1459,7 +1446,6 @@ config SENSORS_SMSC47B397
config SENSORS_SCH56XX_COMMON
tristate
- default n
config SENSORS_SCH5627
tristate "SMSC SCH5627"
@@ -1505,7 +1491,6 @@ config SENSORS_STTS751
config SENSORS_SMM665
tristate "Summit Microelectronics SMM665"
depends on I2C
- default n
help
If you say yes here you get support for the hardware monitoring
features of the Summit Microelectronics SMM665/SMM665B Six-Channel
@@ -1725,6 +1710,16 @@ config SENSORS_VT8231
This driver can also be built as a module. If so, the module
will be called vt8231.
+config SENSORS_W83773G
+ tristate "Nuvoton W83773G"
+ depends on I2C
+ help
+ If you say yes here you get support for the Nuvoton W83773G hardware
+ monitoring chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83773g.
+
config SENSORS_W83781D
tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
depends on I2C
@@ -1782,7 +1777,6 @@ config SENSORS_W83795
config SENSORS_W83795_FANCTRL
bool "Include automatic fan control support (DANGEROUS)"
depends on SENSORS_W83795
- default n
help
If you say yes here, support for automatic fan speed control
will be included in the driver.
drivers/hwmon/Makefile
View filediff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 0fe489f..f814b4a 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_SENSORS_ATK0110) += asus_atk0110.o
# asb100, then w83781d go first, as they can override other drivers' addresses.
obj-$(CONFIG_SENSORS_ASB100) += asb100.o
obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o
+obj-$(CONFIG_SENSORS_W83773G) += w83773g.o
obj-$(CONFIG_SENSORS_W83792D) += w83792d.o
obj-$(CONFIG_SENSORS_W83793) += w83793.o
obj-$(CONFIG_SENSORS_W83795) += w83795.o
drivers/hwmon/aspeed-pwm-tacho.c
View filediff --git a/drivers/hwmon/aspeed-pwm-tacho.c b/drivers/hwmon/aspeed-pwm-tacho.c
index 63a95e2..693a3d5 100644
--- a/drivers/hwmon/aspeed-pwm-tacho.c
+++ b/drivers/hwmon/aspeed-pwm-tacho.c
@@ -19,6 +19,7 @@
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include <linux/reset.h>
#include <linux/sysfs.h>
#include <linux/thermal.h>
@@ -181,6 +182,7 @@ struct aspeed_cooling_device {
struct aspeed_pwm_tacho_data {
struct regmap *regmap;
+ struct reset_control *rst;
unsigned long clk_freq;
bool pwm_present[8];
bool fan_tach_present[16];
@@ -905,6 +907,13 @@ static int aspeed_create_fan(struct device *dev,
return 0;
}
+static void aspeed_pwm_tacho_remove(void *data)
+{
+ struct aspeed_pwm_tacho_data *priv = data;
+
+ reset_control_assert(priv->rst);
+}
+
static int aspeed_pwm_tacho_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -931,6 +940,19 @@ static int aspeed_pwm_tacho_probe(struct platform_device *pdev)
&aspeed_pwm_tacho_regmap_config);
if (IS_ERR(priv->regmap))
return PTR_ERR(priv->regmap);
+
+ priv->rst = devm_reset_control_get_exclusive(dev, NULL);
+ if (IS_ERR(priv->rst)) {
+ dev_err(dev,
+ "missing or invalid reset controller device tree entry");
+ return PTR_ERR(priv->rst);
+ }
+ reset_control_deassert(priv->rst);
+
+ ret = devm_add_action_or_reset(dev, aspeed_pwm_tacho_remove, priv);
+ if (ret)
+ return ret;
+
regmap_write(priv->regmap, ASPEED_PTCR_TACH_SOURCE, 0);
regmap_write(priv->regmap, ASPEED_PTCR_TACH_SOURCE_EXT, 0);
drivers/hwmon/coretemp.c
View filediff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index c13a4fd..4bdbf77 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -246,7 +246,8 @@ static int adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev)
int err;
u32 eax, edx;
int i;
- struct pci_dev *host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
+ u16 devfn = PCI_DEVFN(0, 0);
+ struct pci_dev *host_bridge = pci_get_domain_bus_and_slot(0, 0, devfn);
/*
* Explicit tjmax table entries override heuristics.
drivers/hwmon/dell-smm-hwmon.c
View filediff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
index c7c9e95..bf3bb7e 100644
--- a/drivers/hwmon/dell-smm-hwmon.c
+++ b/drivers/hwmon/dell-smm-hwmon.c
@@ -76,6 +76,7 @@ static uint i8k_fan_mult = I8K_FAN_MULT;
static uint i8k_pwm_mult;
static uint i8k_fan_max = I8K_FAN_HIGH;
static bool disallow_fan_type_call;
+static bool disallow_fan_support;
#define I8K_HWMON_HAVE_TEMP1 (1 << 0)
#define I8K_HWMON_HAVE_TEMP2 (1 << 1)
@@ -242,6 +243,9 @@ static int i8k_get_fan_status(int fan)
{
struct smm_regs regs = { .eax = I8K_SMM_GET_FAN, };
+ if (disallow_fan_support)
+ return -EINVAL;
+
regs.ebx = fan & 0xff;
return i8k_smm(®s) ? : regs.eax & 0xff;
}
@@ -253,6 +257,9 @@ static int i8k_get_fan_speed(int fan)
{
struct smm_regs regs = { .eax = I8K_SMM_GET_SPEED, };
+ if (disallow_fan_support)
+ return -EINVAL;
+
regs.ebx = fan & 0xff;
return i8k_smm(®s) ? : (regs.eax & 0xffff) * i8k_fan_mult;
}
@@ -264,7 +271,7 @@ static int _i8k_get_fan_type(int fan)
{
struct smm_regs regs = { .eax = I8K_SMM_GET_FAN_TYPE, };
- if (disallow_fan_type_call)
+ if (disallow_fan_support || disallow_fan_type_call)
return -EINVAL;
regs.ebx = fan & 0xff;
@@ -289,6 +296,9 @@ static int i8k_get_fan_nominal_speed(int fan, int speed)
{
struct smm_regs regs = { .eax = I8K_SMM_GET_NOM_SPEED, };
+ if (disallow_fan_support)
+ return -EINVAL;
+
regs.ebx = (fan & 0xff) | (speed << 8);
return i8k_smm(®s) ? : (regs.eax & 0xffff) * i8k_fan_mult;
}
@@ -300,6 +310,9 @@ static int i8k_set_fan(int fan, int speed)
{
struct smm_regs regs = { .eax = I8K_SMM_SET_FAN, };
+ if (disallow_fan_support)
+ return -EINVAL;
+
speed = (speed < 0) ? 0 : ((speed > i8k_fan_max) ? i8k_fan_max : speed);
regs.ebx = (fan & 0xff) | (speed << 8);
@@ -772,6 +785,8 @@ static struct attribute *i8k_attrs[] = {
static umode_t i8k_is_visible(struct kobject *kobj, struct attribute *attr,
int index)
{
+ if (disallow_fan_support && index >= 8)
+ return 0;
if (disallow_fan_type_call &&
(index == 9 || index == 12 || index == 15))
return 0;
@@ -1039,6 +1054,30 @@ static const struct dmi_system_id i8k_blacklist_fan_type_dmi_table[] __initconst
};
/*
+ * On some machines all fan related SMM functions implemented by Dell BIOS
+ * firmware freeze kernel for about 500ms. Until Dell fixes these problems fan
+ * support for affected blacklisted Dell machines stay disabled.
+ * See bug: https://bugzilla.kernel.org/show_bug.cgi?id=195751
+ */
+static struct dmi_system_id i8k_blacklist_fan_support_dmi_table[] __initdata = {
+ {
+ .ident = "Dell Inspiron 7720",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Inspiron 7720"),
+ },
+ },
+ {
+ .ident = "Dell Vostro 3360",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Vostro 3360"),
+ },
+ },
+ { }
+};
+
+/*
* Probe for the presence of a supported laptop.
*/
static int __init i8k_probe(void)
@@ -1060,8 +1099,17 @@ static int __init i8k_probe(void)
i8k_get_dmi_data(DMI_BIOS_VERSION));
}
- if (dmi_check_system(i8k_blacklist_fan_type_dmi_table))
- disallow_fan_type_call = true;
+ if (dmi_check_system(i8k_blacklist_fan_support_dmi_table)) {
+ pr_warn("broken Dell BIOS detected, disallow fan support\n");
+ if (!force)
+ disallow_fan_support = true;
+ }
+
+ if (dmi_check_system(i8k_blacklist_fan_type_dmi_table)) {
+ pr_warn("broken Dell BIOS detected, disallow fan type call\n");
+ if (!force)
+ disallow_fan_type_call = true;
+ }
strlcpy(bios_version, i8k_get_dmi_data(DMI_BIOS_VERSION),
sizeof(bios_version));
drivers/hwmon/hih6130.c
View filediff --git a/drivers/hwmon/hih6130.c b/drivers/hwmon/hih6130.c
index 7b73d20..0ae1ee1 100644
--- a/drivers/hwmon/hih6130.c
+++ b/drivers/hwmon/hih6130.c
@@ -37,7 +37,7 @@
/**
* struct hih6130 - HIH-6130 device specific data
- * @hwmon_dev: device registered with hwmon
+ * @client: pointer to I2C client device
* @lock: mutex to protect measurement values
* @valid: only false before first measurement is taken
* @last_update: time of last update (jiffies)
drivers/hwmon/hwmon.c
View filediff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
index af51230..32083e4 100644
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -678,7 +678,7 @@ EXPORT_SYMBOL_GPL(hwmon_device_register_with_groups);
* @dev: the parent device
* @name: hwmon name attribute
* @drvdata: driver data to attach to created device
- * @info: pointer to hwmon chip information
+ * @chip: pointer to hwmon chip information
* @extra_groups: pointer to list of additional non-standard attribute groups
*
* hwmon_device_unregister() must be called when the device is no
@@ -785,11 +785,11 @@ EXPORT_SYMBOL_GPL(devm_hwmon_device_register_with_groups);
/**
* devm_hwmon_device_register_with_info - register w/ hwmon
- * @dev: the parent device
- * @name: hwmon name attribute
- * @drvdata: driver data to attach to created device
- * @info: Pointer to hwmon chip information
- * @groups - pointer to list of driver specific attribute groups
+ * @dev: the parent device
+ * @name: hwmon name attribute
+ * @drvdata: driver data to attach to created device
+ * @chip: pointer to hwmon chip information
+ * @groups: pointer to list of driver specific attribute groups
*
* Returns the pointer to the new device. The new device is automatically
* unregistered with the parent device.
drivers/hwmon/iio_hwmon.c
View filediff --git a/drivers/hwmon/iio_hwmon.c b/drivers/hwmon/iio_hwmon.c
index f6a7667..5e5b32a 100644
--- a/drivers/hwmon/iio_hwmon.c
+++ b/drivers/hwmon/iio_hwmon.c
@@ -23,7 +23,8 @@
* @channels: filled with array of channels from iio
* @num_channels: number of channels in channels (saves counting twice)
* @hwmon_dev: associated hwmon device
- * @attr_group: the group of attributes
+ * @attr_group: the group of attributes
+ * @groups: null terminated array of attribute groups
* @attrs: null terminated array of attribute pointers.
*/
struct iio_hwmon_state {
drivers/hwmon/ina2xx.c
View filediff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index 62e38fa..e9e6aea 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -95,18 +95,20 @@ enum ina2xx_ids { ina219, ina226 };
struct ina2xx_config {
u16 config_default;
- int calibration_factor;
+ int calibration_value;
int registers;
int shunt_div;
int bus_voltage_shift;
This diff is incomplete. Download the complete patch.
drivers/hwmon/k10temp.c
View fileThis diff is incomplete. Download the complete patch.
drivers/hwmon/lm75.c
View fileThis diff is incomplete. Download the complete patch.
drivers/hwmon/pmbus/Kconfig
View fileThis diff is incomplete. Download the complete patch.
drivers/hwmon/pmbus/ibm-cffps.c
View fileThis diff is incomplete. Download the complete patch.
drivers/hwmon/pmbus/ir35221.c
View fileThis diff is incomplete. Download the complete patch.
drivers/hwmon/pmbus/lm25066.c
View fileThis diff is incomplete. Download the complete patch.
drivers/hwmon/pmbus/max31785.c
View fileThis diff is incomplete. Download the complete patch.
drivers/hwmon/pmbus/pmbus.h
View fileThis diff is incomplete. Download the complete patch.
drivers/hwmon/pmbus/pmbus_core.c
View fileThis diff is incomplete. Download the complete patch.
drivers/hwmon/sht15.c
View fileThis diff is incomplete. Download the complete patch.
drivers/hwmon/sht21.c
View fileThis diff is incomplete. Download the complete patch.
drivers/hwmon/sht3x.c
View fileThis diff is incomplete. Download the complete patch.
drivers/hwmon/w83773g.c
View fileThis diff is incomplete. Download the complete patch.