diff --git a/Documentation/drivers/edac/edac.txt b/Documentation/drivers/edac/edac.txt
index 70d96a6..7b3d969 100644
--- a/Documentation/drivers/edac/edac.txt
+++ b/Documentation/drivers/edac/edac.txt
@@ -35,15 +35,14 @@ the vendor should tie the parity status bits to 0 if they do not intend
 to generate parity.  Some vendors do not do this, and thus the parity bit
 can "float" giving false positives.
 
-The PCI Parity EDAC device has the ability to "skip" known flaky
-cards during the parity scan. These are set by the parity "blacklist"
-interface in the sysfs for PCI Parity. (See the PCI section in the sysfs
-section below.) There is also a parity "whitelist" which is used as
-an explicit list of devices to scan, while the blacklist is a list
-of devices to skip.
+[There are patches in the kernel queue which will allow for storage of
+quirks of PCI devices reporting false parity positives. The 2.6.18
+kernel should have those patches included. When that becomes available,
+then EDAC will be patched to utilize that information to "skip" such
+devices.]
 
-EDAC will have future error detectors that will be added or integrated
-into EDAC in the following list:
+EDAC will have future error detectors that will be integrated with
+EDAC or added to it, in the following list:
 
 	MCE	Machine Check Exception
 	MCA	Machine Check Architecture
@@ -93,22 +92,24 @@ EDAC lives in the /sys/devices/system/edac directory. Within this directory
 there currently reside 2 'edac' components:
 
 	mc	memory controller(s) system
-	pci	PCI status system
+	pci	PCI control and status system
 
 
 ============================================================================
 Memory Controller (mc) Model
 
 First a background on the memory controller's model abstracted in EDAC.
-Each mc device controls a set of DIMM memory modules. These modules are
+Each 'mc' device controls a set of DIMM memory modules. These modules are
 laid out in a Chip-Select Row (csrowX) and Channel table (chX). There can
-be multiple csrows and two channels.
+be multiple csrows and multiple channels.
 
 Memory controllers allow for several csrows, with 8 csrows being a typical value.
 Yet, the actual number of csrows depends on the electrical "loading"
 of a given motherboard, memory controller and DIMM characteristics.
 
 Dual channels allows for 128 bit data transfers to the CPU from memory.
+Some newer chipsets allow for more than 2 channels, like Fully Buffered DIMMs
+(FB-DIMMs). The following example will assume 2 channels:
 
 
 		Channel 0	Channel 1
@@ -234,23 +235,15 @@ Polling period control file:
 	The time period, in milliseconds, for polling for error information.
 	Too small a value wastes resources.  Too large a value might delay
 	necessary handling of errors and might loose valuable information for
-	locating the error.  1000 milliseconds (once each second) is about
-	right for most uses.
+	locating the error.  1000 milliseconds (once each second) is the current
+	default. Systems which require all the bandwidth they can get, may
+	increase this.
 
 	LOAD TIME: module/kernel parameter: poll_msec=[0|1]
 
 	RUN TIME: echo "1000" >/sys/devices/system/edac/mc/poll_msec
 
 
-Module Version read-only attribute file:
-
-	'mc_version'
-
-	The EDAC CORE module's version and compile date are shown here to
-	indicate what EDAC is running.
-
-
-
 ============================================================================
 'mcX' DIRECTORIES
 
@@ -284,35 +277,6 @@ Seconds since last counter reset control file:
 
 
 
-DIMM capability attribute file:
-
-	'edac_capability'
-
-	The EDAC (Error Detection and Correction) capabilities/modes of
-	the memory controller hardware.
-
-
-DIMM Current Capability attribute file:
-
-	'edac_current_capability'
-
-	The EDAC capabilities available with the hardware
-	configuration.  This may not be the same as "EDAC capability"
-	if the correct memory is not used.  If a memory controller is
-	capable of EDAC, but DIMMs without check bits are in use, then
-	Parity, SECDED, S4ECD4ED capabilities will not be available
-	even though the memory controller might be capable of those
-	modes with the proper memory loaded.
-
-
-Memory Type supported on this controller attribute file:
-
-	'supported_mem_type'
-
-	This attribute file displays the memory type, usually
-	buffered and unbuffered DIMMs.
-
-
 Memory Controller name attribute file:
 
 	'mc_name'
@@ -321,16 +285,6 @@ Memory Controller name attribute file:
 	that is being utilized.
 
 
-Memory Controller Module name attribute file:
-
-	'module_name'
-
-	This attribute file displays the memory controller module name,
-	version and date built.  The name of the memory controller
-	hardware - some drivers work with multiple controllers and
-	this field shows which hardware is present.
-
-
 Total memory managed by this memory controller attribute file:
 
 	'size_mb'
@@ -432,6 +386,9 @@ Memory Type attribute file:
 
 	This attribute file will display what type of memory is currently
 	on this csrow. Normally, either buffered or unbuffered memory.
+	Examples:
+		Registered-DDR
+		Unbuffered-DDR
 
 
 EDAC Mode of operation attribute file:
@@ -446,8 +403,13 @@ Device type attribute file:
 
 	'dev_type'
 
-	This attribute file will display what type of DIMM device is
-	being utilized. Example:  x4
+	This attribute file will display what type of DRAM device is
+	being utilized on this DIMM.
+	Examples:
+		x1
+		x2
+		x4
+		x8
 
 
 Channel 0 CE Count attribute file:
@@ -522,10 +484,10 @@ SYSTEM LOGGING
 If logging for UEs and CEs are enabled then system logs will have
 error notices indicating errors that have been detected:
 
-MC0: CE page 0x283, offset 0xce0, grain 8, syndrome 0x6ec3, row 0,
+EDAC MC0: CE page 0x283, offset 0xce0, grain 8, syndrome 0x6ec3, row 0,
 channel 1 "DIMM_B1": amd76x_edac
 
-MC0: CE page 0x1e5, offset 0xfb0, grain 8, syndrome 0xb741, row 0,
+EDAC MC0: CE page 0x1e5, offset 0xfb0, grain 8, syndrome 0xb741, row 0,
 channel 1 "DIMM_B1": amd76x_edac
 
 
@@ -610,64 +572,4 @@ Parity Count:
 
 
 
-PCI Device Whitelist:
-
-	'pci_parity_whitelist'
-
-	This control file allows for an explicit list of PCI devices to be
-	scanned for parity errors. Only devices found on this list will
-	be examined.  The list is a line of hexadecimal VENDOR and DEVICE
-	ID tuples:
-
-	1022:7450,1434:16a6
-
-	One or more can be inserted, separated by a comma.
-
-	To write the above list doing the following as one command line:
-
-	echo "1022:7450,1434:16a6"
-		> /sys/devices/system/edac/pci/pci_parity_whitelist
-
-
-
-	To display what the whitelist is, simply 'cat' the same file.
-
-
-PCI Device Blacklist:
-
-	'pci_parity_blacklist'
-
-	This control file allows for a list of PCI devices to be
-	skipped for scanning.
-	The list is a line of hexadecimal VENDOR and DEVICE ID tuples:
-
-	1022:7450,1434:16a6
-
-	One or more can be inserted, separated by a comma.
-
-	To write the above list doing the following as one command line:
-
-	echo "1022:7450,1434:16a6"
-		> /sys/devices/system/edac/pci/pci_parity_blacklist
-
-
-	To display what the whitelist currently contains,
-	simply 'cat' the same file.
-
 =======================================================================
-
-PCI Vendor and Devices IDs can be obtained with the lspci command. Using
-the -n option lspci will display the vendor and device IDs. The system
-administrator will have to determine which devices should be scanned or
-skipped.
-
-
-
-The two lists (white and black) are prioritized. blacklist is the lower
-priority and will NOT be utilized when a whitelist has been set.
-Turn OFF a whitelist by an empty echo command:
-
-	echo > /sys/devices/system/edac/pci/pci_parity_whitelist
-
-and any previous blacklist will be utilized.
-
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index 3a7cfe8..4bde30b 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -1,6 +1,6 @@
 /*
  * edac_mc kernel module
- * (C) 2005 Linux Networx (http://lnxi.com)
+ * (C) 2005, 2006 Linux Networx (http://lnxi.com)
  * This file may be distributed under the terms of the
  * GNU General Public License.
  *
@@ -33,13 +33,8 @@
 #include <asm/edac.h>
 #include "edac_mc.h"
 
-#define EDAC_MC_VERSION "Ver: 2.0.0 " __DATE__
+#define EDAC_MC_VERSION "Ver: 2.0.1 " __DATE__
 
-/* For now, disable the EDAC sysfs code.  The sysfs interface that EDAC
- * presents to user space needs more thought, and is likely to change
- * substantially.
- */
-#define DISABLE_EDAC_SYSFS
 
 #ifdef CONFIG_EDAC_DEBUG
 /* Values of 0 to 4 will generate output */
@@ -64,31 +59,12 @@ static int check_pci_parity = 0;	/* default YES check PCI parity */
 static int panic_on_pci_parity;		/* default no panic on PCI Parity */
 static atomic_t pci_parity_count = ATOMIC_INIT(0);
 
-/* Structure of the whitelist and blacklist arrays */
-struct edac_pci_device_list {
-	unsigned int  vendor;		/* Vendor ID */
-	unsigned int  device;		/* Deviice ID */
-};
-
-#define MAX_LISTED_PCI_DEVICES		32
-
-/* List of PCI devices (vendor-id:device-id) that should be skipped */
-static struct edac_pci_device_list pci_blacklist[MAX_LISTED_PCI_DEVICES];
-static int pci_blacklist_count;
-
-/* List of PCI devices (vendor-id:device-id) that should be scanned */
-static struct edac_pci_device_list pci_whitelist[MAX_LISTED_PCI_DEVICES];
-static int pci_whitelist_count ;
-
-#ifndef DISABLE_EDAC_SYSFS
 static struct kobject edac_pci_kobj; /* /sys/devices/system/edac/pci */
 static struct completion edac_pci_kobj_complete;
-#endif	/* DISABLE_EDAC_SYSFS */
 #endif	/* CONFIG_PCI */
 
 /*  START sysfs data and methods */
 
-#ifndef DISABLE_EDAC_SYSFS
 
 static const char *mem_types[] = {
 	[MEM_EMPTY] = "Empty",
@@ -147,18 +123,10 @@ static struct completion edac_memctrl_kobj_complete;
  * /sys/devices/system/edac/mc;
  *	data structures and methods
  */
-#if 0
-static ssize_t memctrl_string_show(void *ptr, char *buffer)
-{
-	char *value = (char*) ptr;
-	return sprintf(buffer, "%s\n", value);
-}
-#endif
-
 static ssize_t memctrl_int_show(void *ptr, char *buffer)
 {
 	int *value = (int*) ptr;
-	return sprintf(buffer, "%d\n", *value);
+	return sprintf(buffer, "%u\n", *value);
 }
 
 static ssize_t memctrl_int_store(void *ptr, const char *buffer, size_t count)
@@ -224,11 +192,6 @@ struct memctrl_dev_attribute attr_##_name = {			\
 	.store  = _store,					\
 };
 
-/* cwrow<id> attribute f*/
-#if 0
-MEMCTRL_STRING_ATTR(mc_version,EDAC_MC_VERSION,S_IRUGO,memctrl_string_show,NULL);
-#endif
-
 /* csrow<id> control files */
 MEMCTRL_ATTR(panic_on_ue,S_IRUGO|S_IWUSR,memctrl_int_show,memctrl_int_store);
 MEMCTRL_ATTR(log_ue,S_IRUGO|S_IWUSR,memctrl_int_show,memctrl_int_store);
@@ -257,8 +220,6 @@ static struct kobj_type ktype_memctrl = {
 	.default_attrs = (struct attribute **) memctrl_attr,
 };
 
-#endif  /* DISABLE_EDAC_SYSFS */
-
 /* Initialize the main sysfs entries for edac:
  *   /sys/devices/system/edac
  *
@@ -268,11 +229,6 @@ static struct kobj_type ktype_memctrl = {
  *         !0 FAILURE
  */
 static int edac_sysfs_memctrl_setup(void)
-#ifdef DISABLE_EDAC_SYSFS
-{
-	return 0;
-}
-#else
 {
 	int err=0;
 
@@ -304,7 +260,6 @@ static int edac_sysfs_memctrl_setup(void)
 
 	return err;
 }
-#endif  /* DISABLE_EDAC_SYSFS */
 
 /*
  * MC teardown:
@@ -312,7 +267,6 @@ static int edac_sysfs_memctrl_setup(void)
  */
 static void edac_sysfs_memctrl_teardown(void)
 {
-#ifndef DISABLE_EDAC_SYSFS
 	debugf0("MC: " __FILE__ ": %s()\n", __func__);
 
 	/* Unregister the MC's kobject and wait for reference count to reach
@@ -324,144 +278,9 @@ static void edac_sysfs_memctrl_teardown(void)
 
 	/* Unregister the 'edac' object */
 	sysdev_class_unregister(&edac_class);
-#endif  /* DISABLE_EDAC_SYSFS */
 }
 
 #ifdef CONFIG_PCI
-
-#ifndef DISABLE_EDAC_SYSFS
-
-/*
- * /sys/devices/system/edac/pci;
- * 	data structures and methods
- */
-
-struct list_control {
-	struct edac_pci_device_list *list;
-	int *count;
-};
-
-#if 0
-/* Output the list as:  vendor_id:device:id<,vendor_id:device_id> */
-static ssize_t edac_pci_list_string_show(void *ptr, char *buffer)
-{
-	struct list_control *listctl;
-	struct edac_pci_device_list *list;
-	char *p = buffer;
-	int len=0;
-	int i;
-
-	listctl = ptr;
-	list = listctl->list;
-
-	for (i = 0; i < *(listctl->count); i++, list++ ) {
-		if (len > 0)
-			len += snprintf(p + len, (PAGE_SIZE-len), ",");
-
-		len += snprintf(p + len,
-				(PAGE_SIZE-len),
-				"%x:%x",
-				list->vendor,list->device);
-	}
-
-	len += snprintf(p + len,(PAGE_SIZE-len), "\n");
-	return (ssize_t) len;
-}
-
-/**
- *
- * Scan string from **s to **e looking for one 'vendor:device' tuple
- * where each field is a hex value
- *
- * return 0 if an entry is NOT found
- * return 1 if an entry is found
- *	fill in *vendor_id and *device_id with values found
- *
- * In both cases, make sure *s has been moved forward toward *e
- */
-static int parse_one_device(const char **s,const char **e,
-	unsigned int *vendor_id, unsigned int *device_id)
-{
-	const char *runner, *p;
-
-	/* if null byte, we are done */
-	if (!**s) {
-		(*s)++;  /* keep *s moving */
-		return 0;
-	}
-
-	/* skip over newlines & whitespace */
-	if ((**s == '\n') || isspace(**s)) {
-		(*s)++;
-		return 0;
-	}
-
-	if (!isxdigit(**s)) {
-		(*s)++;
-		return 0;
-	}
-
-	/* parse vendor_id */
-	runner = *s;
-
-	while (runner < *e) {
-		/* scan for vendor:device delimiter */
-		if (*runner == ':') {
-			*vendor_id = simple_strtol((char*) *s, (char**) &p, 16);
-			runner = p + 1;
-			break;
-		}
-
-		runner++;
-	}
-
-	if (!isxdigit(*runner)) {
-		*s = ++runner;
-		return 0;
-	}
-
-	/* parse device_id */
-	if (runner < *e) {
-		*device_id = simple_strtol((char*)runner, (char**)&p, 16);
-		runner = p;
-	}
-
-	*s = runner;
-	return 1;
-}
-
-static ssize_t edac_pci_list_string_store(void *ptr, const char *buffer,
-		size_t count)
-{
-	struct list_control *listctl;
-	struct edac_pci_device_list *list;
-	unsigned int vendor_id, device_id;
-	const char *s, *e;
-	int *index;
-
-	s = (char*)buffer;
-	e = s + count;
-	listctl = ptr;
-	list = listctl->list;
-	index = listctl->count;
-	*index = 0;
-
-	while (*index < MAX_LISTED_PCI_DEVICES) {
-		if (parse_one_device(&s,&e,&vendor_id,&device_id)) {
-			list[ *index ].vendor = vendor_id;
-			list[ *index ].device = device_id;
-			(*index)++;
-		}
-
-		/* check for all data consume */
-		if (s >= e)
-			break;
-	}
-
-	return count;
-}
-
-#endif
 static ssize_t edac_pci_int_show(void *ptr, char *buffer)
 {
 	int *value = ptr;
@@ -529,31 +348,6 @@ struct edac_pci_dev_attribute edac_pci_attr_##_name = {		\
 	.store  = _store,					\
 };
 
-#if 0
-static struct list_control pci_whitelist_control = {
-	.list = pci_whitelist,
-	.count = &pci_whitelist_count
-};
-
-static struct list_control pci_blacklist_control = {
-	.list = pci_blacklist,
-	.count = &pci_blacklist_count
-};
-
-/* whitelist attribute */
-EDAC_PCI_STRING_ATTR(pci_parity_whitelist,
-	&pci_whitelist_control,
-	S_IRUGO|S_IWUSR,
-	edac_pci_list_string_show,
-	edac_pci_list_string_store);
-
-EDAC_PCI_STRING_ATTR(pci_parity_blacklist,
-	&pci_blacklist_control,
-	S_IRUGO|S_IWUSR,
-	edac_pci_list_string_show,
-	edac_pci_list_string_store);
-#endif
-
 /* PCI Parity control files */
 EDAC_PCI_ATTR(check_pci_parity, S_IRUGO|S_IWUSR, edac_pci_int_show,
 	edac_pci_int_store);
@@ -582,18 +376,11 @@ static struct kobj_type ktype_edac_pci = {
 	.default_attrs = (struct attribute **) edac_pci_attr,
 };
 
-#endif  /* DISABLE_EDAC_SYSFS */
-
 /**
  * edac_sysfs_pci_setup()
  *
  */
 static int edac_sysfs_pci_setup(void)
-#ifdef DISABLE_EDAC_SYSFS
-{
-	return 0;
-}
-#else
 {
 	int err;
 
@@ -617,16 +404,13 @@ static int edac_sysfs_pci_setup(void)
 
 	return err;
 }
-#endif  /* DISABLE_EDAC_SYSFS */
 
 static void edac_sysfs_pci_teardown(void)
 {
-#ifndef DISABLE_EDAC_SYSFS
 	debugf0("%s()\n", __func__);
 	init_completion(&edac_pci_kobj_complete);
 	kobject_unregister(&edac_pci_kobj);
 	wait_for_completion(&edac_pci_kobj_complete);
-#endif
 }
 
 
@@ -756,36 +540,6 @@ static void edac_pci_dev_parity_test(struct pci_dev *dev)
 }
 
 /*
- * check_dev_on_list: Scan for a PCI device on a white/black list
- * @list:	an EDAC  &edac_pci_device_list  white/black list pointer
- * @free_index:	index of next free entry on the list
- * @pci_dev:	PCI Device pointer
- *
- * see if list contains the device.
- *
- * Returns:  	0 not found
- *		1 found on list
- */
-static int check_dev_on_list(struct edac_pci_device_list *list,
-		int free_index, struct pci_dev *dev)
-{
-	int i;
-	int rc = 0;     /* Assume not found */
-	unsigned short vendor=dev->vendor;
-	unsigned short device=dev->device;
-
-	/* Scan the list, looking for a vendor/device match */
-	for (i = 0; i < free_index; i++, list++ ) {
-		if ((list->vendor == vendor ) && (list->device == device )) {
-			rc = 1;
-			break;
-		}
-	}
-
-	return rc;
-}
-
-/*
  * pci_dev parity list iterator
  *	Scan the PCI device list for one iteration, looking for SERRORs
  *	Master Parity ERRORS or Parity ERRORs on primary or secondary devices
@@ -799,22 +553,7 @@ static inline void edac_pci_dev_parity_iterator(pci_parity_check_fn_t fn)
 	 * bumped until we are done with it
 	 */
 	while((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-		/* if whitelist exists then it has priority, so only scan
-		 * those devices on the whitelist
-		 */
-		if (pci_whitelist_count > 0 ) {
-			if (check_dev_on_list(pci_whitelist,
-					pci_whitelist_count, dev))
-				fn(dev);
-		} else {
-			/*
-			 * if no whitelist, then check if this devices is
-			 * blacklisted
-			 */
-			if (!check_dev_on_list(pci_blacklist,
-					pci_blacklist_count, dev))
-				fn(dev);
-		}
+		fn(dev);
 	}
 }
 
@@ -855,154 +594,101 @@ static inline void clear_pci_parity_errors(void)
 
 #else	/* CONFIG_PCI */
 
-static inline void do_pci_parity_check(void)
-{
-	/* no-op */
-}
-
-static inline void clear_pci_parity_errors(void)
-{
-	/* no-op */
-}
-
-static void edac_sysfs_pci_teardown(void)
-{
-}
+/* pre-process these away */
+#define	do_pci_parity_check()
+#define	clear_pci_parity_errors()
+#define	edac_sysfs_pci_teardown()
+#define	edac_sysfs_pci_setup()	(0)
 
-static int edac_sysfs_pci_setup(void)
-{
-	return 0;
-}
 #endif	/* CONFIG_PCI */
 
-#ifndef DISABLE_EDAC_SYSFS
-
-/* EDAC sysfs CSROW data structures and methods */
-
-/* Set of more detailed csrow<id> attribute show/store functions */
-static ssize_t csrow_ch0_dimm_label_show(struct csrow_info *csrow, char *data)
-{
-	ssize_t size = 0;
-
-	if (csrow->nr_channels > 0) {
-		size = snprintf(data, EDAC_MC_LABEL_LEN,"%s\n",
-			csrow->channels[0].label);
-	}
-
-	return size;
-}
+/* EDAC sysfs CSROW data structures and methods
+ */
 
-static ssize_t csrow_ch1_dimm_label_show(struct csrow_info *csrow, char *data)
+/* Set of more default csrow<id> attribute show/store functions */
+static ssize_t csrow_ue_count_show(struct csrow_info *csrow, char *data, int private)
 {
-	ssize_t size = 0;
-
-	if (csrow->nr_channels > 0) {
-		size = snprintf(data, EDAC_MC_LABEL_LEN, "%s\n",
-			csrow->channels[1].label);
-	}
-
-	return size;
+	return sprintf(data,"%u\n", csrow->ue_count);
 }
 
-static ssize_t csrow_ch0_dimm_label_store(struct csrow_info *csrow,
-		const char *data, size_t size)
+static ssize_t csrow_ce_count_show(struct csrow_info *csrow, char *data, int private)
 {
-	ssize_t max_size = 0;
-
-	if (csrow->nr_channels > 0) {
-		max_size = min((ssize_t)size,(ssize_t)EDAC_MC_LABEL_LEN-1);
-		strncpy(csrow->channels[0].label, data, max_size);
-		csrow->channels[0].label[max_size] = '\0';
-	}
-
-	return size;
+	return sprintf(data,"%u\n", csrow->ce_count);
 }
 
-static ssize_t csrow_ch1_dimm_label_store(struct csrow_info *csrow,
-		const char *data, size_t size)
+static ssize_t csrow_size_show(struct csrow_info *csrow, char *data, int private)
 {
-	ssize_t max_size = 0;
-
-	if (csrow->nr_channels > 1) {
-		max_size = min((ssize_t)size,(ssize_t)EDAC_MC_LABEL_LEN-1);
-		strncpy(csrow->channels[1].label, data, max_size);
-		csrow->channels[1].label[max_size] = '\0';
-	}
-
-	return max_size;
+	return sprintf(data,"%u\n", PAGES_TO_MiB(csrow->nr_pages));
 }
 
-static ssize_t csrow_ue_count_show(struct csrow_info *csrow, char *data)
+static ssize_t csrow_mem_type_show(struct csrow_info *csrow, char *data, int private)
 {
-	return sprintf(data,"%u\n", csrow->ue_count);
+	return sprintf(data,"%s\n", mem_types[csrow->mtype]);
 }
 
-static ssize_t csrow_ce_count_show(struct csrow_info *csrow, char *data)
+static ssize_t csrow_dev_type_show(struct csrow_info *csrow, char *data, int private)
 {
-	return sprintf(data,"%u\n", csrow->ce_count);
+	return sprintf(data,"%s\n", dev_types[csrow->dtype]);
 }
 
-static ssize_t csrow_ch0_ce_count_show(struct csrow_info *csrow, char *data)
+static ssize_t csrow_edac_mode_show(struct csrow_info *csrow, char *data, int private)
 {
-	ssize_t size = 0;
-
-	if (csrow->nr_channels > 0) {
-		size = sprintf(data,"%u\n", csrow->channels[0].ce_count);
-	}
-
-	return size;
+	return sprintf(data,"%s\n", edac_caps[csrow->edac_mode]);
 }
 
-static ssize_t csrow_ch1_ce_count_show(struct csrow_info *csrow, char *data)
+/* show/store functions for DIMM Label attributes */
+static ssize_t channel_dimm_label_show(struct csrow_info *csrow,
+		char *data, int channel)
 {
-	ssize_t size = 0;
-
-	if (csrow->nr_channels > 1) {
-		size = sprintf(data,"%u\n", csrow->channels[1].ce_count);
-	}
-
-	return size;
+	return snprintf(data, EDAC_MC_LABEL_LEN,"%s",
+			csrow->channels[channel].label);
 }
 
-static ssize_t csrow_size_show(struct csrow_info *csrow, char *data)
+static ssize_t channel_dimm_label_store(struct csrow_info *csrow,
+				const char *data,
+				size_t count,
+				int channel)
 {
-	return sprintf(data,"%u\n", PAGES_TO_MiB(csrow->nr_pages));
-}
+	ssize_t max_size = 0;
 
-static ssize_t csrow_mem_type_show(struct csrow_info *csrow, char *data)
-{
-	return sprintf(data,"%s\n", mem_types[csrow->mtype]);
-}
+	max_size = min((ssize_t)count,(ssize_t)EDAC_MC_LABEL_LEN-1);
+	strncpy(csrow->channels[channel].label, data, max_size);
+	csrow->channels[channel].label[max_size] = '\0';
 
-static ssize_t csrow_dev_type_show(struct csrow_info *csrow, char *data)
-{
-	return sprintf(data,"%s\n", dev_types[csrow->dtype]);
+	return max_size;
 }
 
-static ssize_t csrow_edac_mode_show(struct csrow_info *csrow, char *data)
+/* show function for dynamic chX_ce_count attribute */
+static ssize_t channel_ce_count_show(struct csrow_info *csrow,
+				char *data,
+				int channel)
 {
-	return sprintf(data,"%s\n", edac_caps[csrow->edac_mode]);
+	return sprintf(data, "%u\n", csrow->channels[channel].ce_count);
 }
 
+/* csrow specific attribute structure */
 struct csrowdev_attribute {
 	struct attribute attr;
-	ssize_t (*show)(struct csrow_info *,char *);
-	ssize_t (*store)(struct csrow_info *, const char *,size_t);
+	ssize_t (*show)(struct csrow_info *,char *,int);
+	ssize_t (*store)(struct csrow_info *, const char *,size_t,int);
+	int    private;
 };
 
 #define to_csrow(k) container_of(k, struct csrow_info, kobj)
 #define to_csrowdev_attr(a) container_of(a, struct csrowdev_attribute, attr)
 
-/* Set of show/store higher level functions for csrow objects */
-static ssize_t csrowdev_show(struct kobject *kobj, struct attribute *attr,
-		char *buffer)
+/* Set of show/store higher level functions for default csrow attributes */
+static ssize_t csrowdev_show(struct kobject *kobj,
+			struct attribute *attr,
+			char *buffer)
 {
 	struct csrow_info *csrow = to_csrow(kobj);
 	struct csrowdev_attribute *csrowdev_attr = to_csrowdev_attr(attr);
 
 	if (csrowdev_attr->show)
-		return csrowdev_attr->show(csrow, buffer);
-
+		return csrowdev_attr->show(csrow,
+					buffer,
+					csrowdev_attr->private);
 	return -EIO;
 }
 
@@ -1013,8 +699,10 @@ static ssize_t csrowdev_store(struct kobject *kobj, struct attribute *attr,
 	struct csrowdev_attribute * csrowdev_attr = to_csrowdev_attr(attr);
 
 	if (csrowdev_attr->store)
-		return csrowdev_attr->store(csrow, buffer, count);
-
+		return csrowdev_attr->store(csrow,
+					buffer,
+					count,
+					csrowdev_attr->private);
 	return -EIO;
 }
 
@@ -1023,69 +711,157 @@ static struct sysfs_ops csrowfs_ops = {
 	.store  = csrowdev_store
 };
 
-#define CSROWDEV_ATTR(_name,_mode,_show,_store)			\
+#define CSROWDEV_ATTR(_name,_mode,_show,_store,_private)	\
 struct csrowdev_attribute attr_##_name = {			\
 	.attr = {.name = __stringify(_name), .mode = _mode },	\
 	.show   = _show,					\
 	.store  = _store,					\
+	.private = _private,					\
 };
 
-/* cwrow<id>/attribute files */
-CSROWDEV_ATTR(size_mb,S_IRUGO,csrow_size_show,NULL);
-CSROWDEV_ATTR(dev_type,S_IRUGO,csrow_dev_type_show,NULL);
-CSROWDEV_ATTR(mem_type,S_IRUGO,csrow_mem_type_show,NULL);
-CSROWDEV_ATTR(edac_mode,S_IRUGO,csrow_edac_mode_show,NULL);
-CSROWDEV_ATTR(ue_count,S_IRUGO,csrow_ue_count_show,NULL);
-CSROWDEV_ATTR(ce_count,S_IRUGO,csrow_ce_count_show,NULL);
-CSROWDEV_ATTR(ch0_ce_count,S_IRUGO,csrow_ch0_ce_count_show,NULL);
-CSROWDEV_ATTR(ch1_ce_count,S_IRUGO,csrow_ch1_ce_count_show,NULL);
-
-/* control/attribute files */
-CSROWDEV_ATTR(ch0_dimm_label,S_IRUGO|S_IWUSR,
-		csrow_ch0_dimm_label_show,
-		csrow_ch0_dimm_label_store);
-CSROWDEV_ATTR(ch1_dimm_label,S_IRUGO|S_IWUSR,
-		csrow_ch1_dimm_label_show,
-		csrow_ch1_dimm_label_store);
+/* default cwrow<id>/attribute files */
+CSROWDEV_ATTR(size_mb,S_IRUGO,csrow_size_show,NULL,0);
+CSROWDEV_ATTR(dev_type,S_IRUGO,csrow_dev_type_show,NULL,0);
+CSROWDEV_ATTR(mem_type,S_IRUGO,csrow_mem_type_show,NULL,0);
+CSROWDEV_ATTR(edac_mode,S_IRUGO,csrow_edac_mode_show,NULL,0);
+CSROWDEV_ATTR(ue_count,S_IRUGO,csrow_ue_count_show,NULL,0);
+CSROWDEV_ATTR(ce_count,S_IRUGO,csrow_ce_count_show,NULL,0);
 
-/* Attributes of the CSROW<id> object */
-static struct csrowdev_attribute *csrow_attr[] = {
+/* default attributes of the CSROW<id> object */
+static struct csrowdev_attribute *default_csrow_attr[] = {
 	&attr_dev_type,
 	&attr_mem_type,
 	&attr_edac_mode,
 	&attr_size_mb,
 	&attr_ue_count,
 	&attr_ce_count,
-	&attr_ch0_ce_count,
-	&attr_ch1_ce_count,
-	&attr_ch0_dimm_label,
-	&attr_ch1_dimm_label,
 	NULL,
 };
 
-/* No memory to release */
+
+/* possible dynamic channel DIMM Label attribute files */
+CSROWDEV_ATTR(ch0_dimm_label,S_IRUGO|S_IWUSR,
+		channel_dimm_label_show,
+		channel_dimm_label_store,
+		0 );
+CSROWDEV_ATTR(ch1_dimm_label,S_IRUGO|S_IWUSR,
+		channel_dimm_label_show,
+		channel_dimm_label_store,
+		1 );
+CSROWDEV_ATTR(ch2_dimm_label,S_IRUGO|S_IWUSR,
+		channel_dimm_label_show,
+		channel_dimm_label_store,
+		2 );
+CSROWDEV_ATTR(ch3_dimm_label,S_IRUGO|S_IWUSR,
+		channel_dimm_label_show,
+		channel_dimm_label_store,
+		3 );
+CSROWDEV_ATTR(ch4_dimm_label,S_IRUGO|S_IWUSR,
+		channel_dimm_label_show,
+		channel_dimm_label_store,
+		4 );
+CSROWDEV_ATTR(ch5_dimm_label,S_IRUGO|S_IWUSR,
+		channel_dimm_label_show,
+		channel_dimm_label_store,
+		5 );
+
+/* Total possible dynamic DIMM Label attribute file table */
+static struct csrowdev_attribute *dynamic_csrow_dimm_attr[] = {
+		&attr_ch0_dimm_label,
+		&attr_ch1_dimm_label,
+		&attr_ch2_dimm_label,
+		&attr_ch3_dimm_label,
+		&attr_ch4_dimm_label,
+		&attr_ch5_dimm_label
+};
+
+/* possible dynamic channel ce_count attribute files */
+CSROWDEV_ATTR(ch0_ce_count,S_IRUGO|S_IWUSR,
+		channel_ce_count_show,
+		NULL,
+		0 );
+CSROWDEV_ATTR(ch1_ce_count,S_IRUGO|S_IWUSR,
+		channel_ce_count_show,
+		NULL,
+		1 );
+CSROWDEV_ATTR(ch2_ce_count,S_IRUGO|S_IWUSR,
+		channel_ce_count_show,
+		NULL,
+		2 );
+CSROWDEV_ATTR(ch3_ce_count,S_IRUGO|S_IWUSR,
+		channel_ce_count_show,
+		NULL,
+		3 );
+CSROWDEV_ATTR(ch4_ce_count,S_IRUGO|S_IWUSR,
+		channel_ce_count_show,
+		NULL,
+		4 );
+CSROWDEV_ATTR(ch5_ce_count,S_IRUGO|S_IWUSR,
+		channel_ce_count_show,
+		NULL,
+		5 );
+
+/* Total possible dynamic ce_count attribute file table */
+static struct csrowdev_attribute *dynamic_csrow_ce_count_attr[] = {
+		&attr_ch0_ce_count,
+		&attr_ch1_ce_count,
+		&attr_ch2_ce_count,
+		&attr_ch3_ce_count,
+		&attr_ch4_ce_count,
+		&attr_ch5_ce_count
+};
+
+
+#define EDAC_NR_CHANNELS	6
+
+/* Create dynamic CHANNEL files, indexed by 'chan',  under specifed CSROW */
+static int edac_create_channel_files(struct kobject *kobj, int chan)
+{
+	int err=-ENODEV;
+
+	if (chan >= EDAC_NR_CHANNELS)
+		return err;
+
+	/* create the DIMM label attribute file */
+	err = sysfs_create_file(kobj,
+			(struct attribute *) dynamic_csrow_dimm_attr[chan]);
+
+	if (!err) {
+		/* create the CE Count attribute file */
+		err = sysfs_create_file(kobj,
+			(struct attribute *) dynamic_csrow_ce_count_attr[chan]);
+	} else {
+		debugf1("%s()  dimm labels and ce_count files created", __func__);
+	}
+
+	return err;
+}
+
+/* No memory to release for this kobj */
 static void edac_csrow_instance_release(struct kobject *kobj)
 {
 	struct csrow_info *cs;
 
-	debugf1("%s()\n", __func__);
 	cs = container_of(kobj, struct csrow_info, kobj);
 	complete(&cs->kobj_complete);
 }
 
+/* the kobj_type instance for a CSROW */
 static struct kobj_type ktype_csrow = {
 	.release = edac_csrow_instance_release,
 	.sysfs_ops = &csrowfs_ops,
-	.default_attrs = (struct attribute **) csrow_attr,
+	.default_attrs = (struct attribute **) default_csrow_attr,
 };
 
 /* Create a CSROW object under specifed edac_mc_device */
-static int edac_create_csrow_object(struct kobject *edac_mci_kobj,
-		struct csrow_info *csrow, int index)
+static int edac_create_csrow_object(
+		struct kobject *edac_mci_kobj,
+		struct csrow_info *csrow,
+		int index)
 {
 	int err = 0;
+	int chan;
 
-	debugf0("%s()\n", __func__);
 	memset(&csrow->kobj, 0, sizeof(csrow->kobj));
 
 	/* generate ..../edac/mc/mc<id>/csrow<index>   */
@@ -1095,21 +871,27 @@ static int edac_create_csrow_object(struct kobject *edac_mci_kobj,
 
 	/* name this instance of csrow<id> */
 	err = kobject_set_name(&csrow->kobj,"csrow%d",index);
+	if (err)
+		goto error_exit;
 
+	/* Instanstiate the csrow object */
+	err = kobject_register(&csrow->kobj);
 	if (!err) {
-		/* Instanstiate the csrow object */
-		err = kobject_register(&csrow->kobj);
-
-		if (err)
-			debugf0("Failed to register CSROW%d\n",index);
-		else
-			debugf0("Registered CSROW%d\n",index);
+		/* Create the dyanmic attribute files on this csrow,
+		 * namely, the DIMM labels and the channel ce_count
+		 */
+		for (chan = 0; chan < csrow->nr_channels; chan++) {
+			err = edac_create_channel_files(&csrow->kobj,chan);
+			if (err)
+				break;
+		}
 	}
 
+error_exit:
 	return err;
 }
 
-/* sysfs data structures and methods for the MCI kobjects */
+/* default sysfs methods and data structures for the main MCI kobject */
 
 static ssize_t mci_reset_counters_store(struct mem_ctl_info *mci,
 		const char *data, size_t count)
@@ -1135,6 +917,7 @@ static ssize_t mci_reset_counters_store(struct mem_ctl_info *mci,
 	return count;
 }
 
+/* default attribute files for the MCI object */
 static ssize_t mci_ue_count_show(struct mem_ctl_info *mci, char *data)
 {
 	return sprintf(data,"%d\n", mci->ue_count);
@@ -1160,71 +943,11 @@ static ssize_t mci_seconds_show(struct mem_ctl_info *mci, char *data)
 	return sprintf(data,"%ld\n", (jiffies - mci->start_time) / HZ);
 }
 
-static ssize_t mci_mod_name_show(struct mem_ctl_info *mci, char *data)
-{
-	return sprintf(data,"%s %s\n", mci->mod_name, mci->mod_ver);
-}
-
 static ssize_t mci_ctl_name_show(struct mem_ctl_info *mci, char *data)
 {
 	return sprintf(data,"%s\n", mci->ctl_name);
 }
 
-static int mci_output_edac_cap(char *buf, unsigned long edac_cap)
-{
-	char *p = buf;
-	int bit_idx;
-
-	for (bit_idx = 0; bit_idx < 8 * sizeof(edac_cap); bit_idx++) {
-		if ((edac_cap >> bit_idx) & 0x1)
-			p += sprintf(p, "%s ", edac_caps[bit_idx]);
-	}
-
-	return p - buf;
-}
-
-static ssize_t mci_edac_capability_show(struct mem_ctl_info *mci, char *data)
-{
-	char *p = data;
-
-	p += mci_output_edac_cap(p,mci->edac_ctl_cap);
-	p += sprintf(p, "\n");
-	return p - data;
-}
-
-static ssize_t mci_edac_current_capability_show(struct mem_ctl_info *mci,
-		char *data)
-{
-	char *p = data;
-
-	p += mci_output_edac_cap(p,mci->edac_cap);
-	p += sprintf(p, "\n");
-	return p - data;
-}
-
-static int mci_output_mtype_cap(char *buf, unsigned long mtype_cap)
-{
-	char *p = buf;
-	int bit_idx;
-
-	for (bit_idx = 0; bit_idx < 8 * sizeof(mtype_cap); bit_idx++) {
-		if ((mtype_cap >> bit_idx) & 0x1)
-			p += sprintf(p, "%s ", mem_types[bit_idx]);
-	}
-
-	return p - buf;
-}
-
-static ssize_t mci_supported_mem_type_show(struct mem_ctl_info *mci,
-		char *data)
-{
-	char *p = data;
-
-	p += mci_output_mtype_cap(p,mci->mtype_cap);
-	p += sprintf(p, "\n");
-	return p - data;
-}
-
 static ssize_t mci_size_mb_show(struct mem_ctl_info *mci, char *data)
 {
 	int total_pages, csrow_idx;
@@ -1251,6 +974,7 @@ struct mcidev_attribute {
 #define to_mci(k) container_of(k, struct mem_ctl_info, edac_mci_kobj)
 #define to_mcidev_attr(a) container_of(a, struct mcidev_attribute, attr)
 
+/* MCI show/store functions for top most object */
 static ssize_t mcidev_show(struct kobject *kobj, struct attribute *attr,
 		char *buffer)
 {
@@ -1287,31 +1011,21 @@ struct mcidev_attribute mci_attr_##_name = {			\
 	.store  = _store,					\
 };
 
-/* Control file */
+/* default Control file */
 MCIDEV_ATTR(reset_counters,S_IWUSR,NULL,mci_reset_counters_store);
 
-/* Attribute files */
+/* default Attribute files */
 MCIDEV_ATTR(mc_name,S_IRUGO,mci_ctl_name_show,NULL);
-MCIDEV_ATTR(module_name,S_IRUGO,mci_mod_name_show,NULL);
-MCIDEV_ATTR(edac_capability,S_IRUGO,mci_edac_capability_show,NULL);
 MCIDEV_ATTR(size_mb,S_IRUGO,mci_size_mb_show,NULL);
 MCIDEV_ATTR(seconds_since_reset,S_IRUGO,mci_seconds_show,NULL);
 MCIDEV_ATTR(ue_noinfo_count,S_IRUGO,mci_ue_noinfo_show,NULL);
 MCIDEV_ATTR(ce_noinfo_count,S_IRUGO,mci_ce_noinfo_show,NULL);
 MCIDEV_ATTR(ue_count,S_IRUGO,mci_ue_count_show,NULL);
 MCIDEV_ATTR(ce_count,S_IRUGO,mci_ce_count_show,NULL);
-MCIDEV_ATTR(edac_current_capability,S_IRUGO,
-	mci_edac_current_capability_show,NULL);
-MCIDEV_ATTR(supported_mem_type,S_IRUGO,
-	mci_supported_mem_type_show,NULL);
 
 static struct mcidev_attribute *mci_attr[] = {
 	&mci_attr_reset_counters,
-	&mci_attr_module_name,
 	&mci_attr_mc_name,
-	&mci_attr_edac_capability,
-	&mci_attr_edac_current_capability,
-	&mci_attr_supported_mem_type,
 	&mci_attr_size_mb,
 	&mci_attr_seconds_since_reset,
 	&mci_attr_ue_noinfo_count,
@@ -1339,7 +1053,6 @@ static struct kobj_type ktype_mci = {
 	.default_attrs = (struct attribute **) mci_attr,
 };
 
-#endif  /* DISABLE_EDAC_SYSFS */
 
 #define EDAC_DEVICE_SYMLINK	"device"
 
@@ -1352,11 +1065,6 @@ static struct kobj_type ktype_mci = {
  *	!0	Failure
  */
 static int edac_create_sysfs_mci_device(struct mem_ctl_info *mci)
-#ifdef DISABLE_EDAC_SYSFS
-{
-	return 0;
-}
-#else
 {
 	int i;
 	int err;
@@ -1368,7 +1076,6 @@ static int edac_create_sysfs_mci_device(struct mem_ctl_info *mci)
 
 	/* set the name of the mc<id> object */
 	err = kobject_set_name(edac_mci_kobj,"mc%d",mci->mc_idx);
-
 	if (err)
 		return err;
 
@@ -1378,14 +1085,12 @@ static int edac_create_sysfs_mci_device(struct mem_ctl_info *mci)
 
 	/* register the mc<id> kobject */
 	err = kobject_register(edac_mci_kobj);
-
 	if (err)
 		return err;
 
 	/* create a symlink for the device */
 	err = sysfs_create_link(edac_mci_kobj, &mci->dev->kobj,
 				EDAC_DEVICE_SYMLINK);
-
 	if (err)
 		goto fail0;
 
@@ -1398,7 +1103,6 @@ static int edac_create_sysfs_mci_device(struct mem_ctl_info *mci)
 		/* Only expose populated CSROWs */
 		if (csrow->nr_pages > 0) {
 			err = edac_create_csrow_object(edac_mci_kobj,csrow,i);
-
 			if (err)
 				goto fail1;
 		}
@@ -1422,14 +1126,12 @@ fail0:
 	wait_for_completion(&mci->kobj_complete);
 	return err;
 }
-#endif  /* DISABLE_EDAC_SYSFS */
 
 /*
  * remove a Memory Controller instance
  */
 static void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci)
 {
-#ifndef DISABLE_EDAC_SYSFS
 	int i;
 
 	debugf0("%s()\n", __func__);
@@ -1447,7 +1149,6 @@ static void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci)
 	init_completion(&mci->kobj_complete);
 	kobject_unregister(&mci->edac_mci_kobj);
 	wait_for_completion(&mci->kobj_complete);
-#endif  /* DISABLE_EDAC_SYSFS */
 }
 
 /* END OF sysfs data and methods */
